Studies of wall shear and mass transfer in a large scale model of neonatal high-frequency jet ventilation

Ventilation‐induced epithelial injury drives biological onset of lung trauma in vitro and is mitigated with prophylactic anti‐inflammatory therapeutics

Mortality rates among patients suffering from acute respiratory failure remain perplexingly high despite the maintenance of blood oxygen homeostasis during ventilatory support. The biotrauma hypothesis advocates that mechanical forces from invasive ventilation trigger immunological mediators that spread systemically. Yet, how these forces elicit an immune response remains unclear. Here, a biomimetic in vitro three‐dimensional (3D) upper airways model allows to recapitulate lung injury and immune responses induced during invasive mechanical ventilation in neonates. Under such ventilatory support, flow‐induced stresses injure the bronchial epithelium of the intubated airways model and directly modulate epithelial cell inflammatory cytokine secretion associated with pulmonary injury. Fluorescence microscopy and biochemical analyses reveal site‐specific susceptibility to epithelial erosion in airways from jet‐flow impaction and are linked to increases in cell apoptosis and modulated secretions of cytokines IL‐6, ‐8, and ‐10. In an effort to mitigate the onset of biotrauma, prophylactic pharmacological treatment with Montelukast, a leukotriene receptor antagonist, reduces apoptosis and pro‐inflammatory signaling during invasive ventilation of the in vitro model. This 3D airway platform points to a previously overlooked origin of lung injury and showcases translational opportunities in preclinical pulmonary research toward protective therapies and improved protocols for patient care.

Independent Lung Ventilation-Experimental Studies on a 3D Printed Respiratory Tract Model

Independent lung ventilation (ILV) is a life-saving procedure in unilateral pulmonary pathologies. ILV is underused in clinical practice, mostly due to the technically demanding placement of a double lumen endotracheal tube (ETT). Moreover, the determination of ventilation parameters for each lung in vivo is limited. In recent years, the development of 3D printing techniques enabled the production of highly accurate physical models of anatomical structures used for in vitro research, considering the high risk of in vivo studies. The purpose of this study was to assess the influence of double-lumen ETT on the gas transport and mixing in the anatomically accurate 3D-printed model of the bronchial tree, with lung lobes of different compliances, using various ventilation modes. The bronchial tree was obtained from Respiratory Drug Delivery (RDD Online, Richmond, VA, USA), processed and printed by a dual extruder FFF 3D printer. The test system was also composed of left side double-lumen endotracheal tube, Siemens Test Lung 190 and anesthetic breathing bag (as lobes). Pressure and flow measurements were taken at the outlets of the secondary bronchus. The measured resistance increased six times in the presence of double-lumen ETT. Differences between the flow distribution to the less and more compliant lobe were more significant for the airways with double-lumen ETT. The ability to predict the actual flow distribution in model airways is necessary to conduct effective ILV in clinical conditions.

Cell adhesion in microchannel multiple constrictions - Evidence of mass transport limitations

Biofilm growth (fouling) in microdevices is a critical concern in several industrial, engineering and health applications, particularly in novel high-performance microdevices often designed with complex geometries, narrow regions and multiple headers. Unfortunately, on these devices, the regions with local high wall shear stresses (WSS) also show high local fouling rates. Several explanations have been put forward by the scientific community, including the effect of cell transport by Brownian motion on the adhesion rate. In this work, for the first time, both WSS and convection and Brownian diffusion effects on cell adhesion were evaluated along a microchannel with intercalate constriction and expansion zones designed to mimic the hydrodynamics of the human body and biomedical devices. Convection and Brownian diffusion effects were numerically studied using a steady-state convective-diffusion model (convection, diffusion and sedimentation). According to the numerical results, the convection and Brownian diffusion effects on cell adhesion are effectively more significant in regions with high WSS. Furthermore, a good agreement was observed between experimental and predicted local Sherwood numbers, particularly at the entrance and within the multiple constrictions. However, further mechanisms should be considered to accurately predict cell adhesion in the expansion zones. The described numerical approach can be used as a way to identify possible clogging zones in microchannels, and defining solutions, even before the construction of the prototype.

Ventilation-induced jet suggests biotrauma in reconstructed airways of the intubated neonate

We investigate respiratory flow phenomena in a reconstructed upper airway model of an intubated neonate undergoing invasive mechanical ventilation, spanning conventional to high-frequency ventilation (HFV) modes. Using high-speed tomographic particle image velocimetry, we resolve transient, three-dimensional flow fields and observe a persistent jet flow exiting the endotracheal tube whose strength is directly modulated according to the ventilation protocol. We identify this synthetic jet as the dominating signature of convective flow under intubated ventilation. Concurrently, our in silico wall shear stress analysis reveals a hitherto overlooked source of ventilator-induced lung injury as a result of jet impingement on the tracheal carina, suggesting damage to the bronchial epithelium; this type of injury is known as biotrauma. We find HFV advantageous in mitigating the intensity of such impingement, which may contribute to its role as a lung protective method. Our findings may encourage the adoption of less invasive ventilation procedures currently used in neonatal intensive care units.

A biomechanical model of pendelluft induced lung injury

Lung ventilation using high frequency oscillatory techniques have been documented to attain adequate gas exchange through various gas transport mechanisms. Among them, the pendelluft flow is considered one of the most crucial mechanisms. In this work, we computationally investigate the induction of abnormal mechanical stresses and a regionally trapped volume of gas due to pendelluft flow. Large eddy simulation was used to model the turbulence in an upper tracheobronchial lung geometry that was derived from CT scans. The pendelluft flow was captured by modeling physiological boundary conditions at the truncated level of the lung model that is sensitive to the coupled resistance and compliance of individual patients. The flow-volume and volume-pressure loops are characterized by irregular shapes and suggest abnormal regional lung ventilation. Incomplete loops were observed indicating gas trapping in these regions signifying a potential for local injury due to incomplete ventilation from a residual volume build-up at the end of the expiration phase. In addition, the gas exchange between units was observed to create a velocity gradient causing a region of high wall shear stress surrounding the carina ridges. The recurrence of the pendelluft flow could cause a rupture to the lung epithelium layer. The trapped gas and wall shear stress were observed to amplify with increasing compliance asymmetry and ventilator operating frequency. In general, despite the significant contribution of the pendelluft flow to the gas exchange augmentation there exists significant risks of localized lung injury, phenomena we describe as pendelluft induced lung injury or PILI.

Effect of mechanical ventilation waveforms on airway wall shear

Better understanding of airway wall shear stress/strain rate is very important in order to prevent inflammation in patients undergoing mechanical ventilation due to respiratory problems in intensive-care medicine. The objective of this study was to investigate the role of mechanical ventilation waveforms on airway wall shear/strain rate using computational fluid dynamics analysis. Six different waveforms were considered to investigate the airway wall shear stress (WSS) from fluid dynamics analysis for the airway geometry of two-to-three generations. The simulation results showed that Original with Sine Inhale Waveform (OSIW) produced the highest WSS value and the Near True Sine Waveform produced the lowest WSS value. Also, the Original with Sine Inhale Waveform and the Short Sine Inhale with Long Sine Exhale Waveform (SSILSEW) produced a higher shear strain rate in comparison to the Original Waveform (OW). These results, combined with optimization, suggest that it is possible to develop a set of mechanical ventilation waveform strategies to avoid inflammation in the lung.

Flow transport and gas mixing during invasive high frequency oscillatory ventilation

A large Eddy simulation (LES) based computational fluid dynamics study was performed to investigate gas transport and mixing in patient specific human lung models during high frequency oscillatory ventilation. Different pressure-controlled waveforms (sinusoidal, exponential and square) and ventilator frequencies (15, 10 and 6Hz) were used (tidal volume=50mL). The waveforms were created by solving the equation of motion subjected to constant lung wall compliance and flow resistance. Simulations were conducted with and without endotracheal tube to understand the effect of invasive management device. Variation of pressure-controlled waveform and frequency exhibits significant differences on counter flow pattern, which could lead to a significant impact on the gas mixing efficiency. Pendelluft-like flow was present for the sinusoidal waveform at all frequencies but occurred only at early inspiration for the square waveform at highest frequency. The square waveform was most efficient for gas mixing, resulting in the least wall shear stress on the lung epithelium layer thereby reducing the risk of barotrauma to both airways and the alveoli for patients undergoing therapy.

Regional tracheal blood flow during conventional and high-frequency jet ventilation in suckling pigs

OBJECTIVE

To determine whether intubation and ventilation with either conventional mechanical ventilation or high-frequency jet ventilation, using dry or humidified gas, could induce regional tracheal ischemia and serve as a basis for the tracheal necrosis observed clinically during ventilation.

DESIGN

Prospective, multiple group, controlled experimental study.

SETTING

Medical school research laboratory.

SUBJECTS

Twenty, 3- to 5-wk-old suckling pigs.

INTERVENTIONS

Anesthetized, closed-chest piglets were intubated and ventilated for 30 mins with conventional mechanical ventilation and then ventilated for 2 additional hrs with either conventional mechanical ventilation or high-frequency jet ventilation. Groups were also ventilated, using both modes of ventilation, with either 37 degrees C humidified gas or 25 degrees C dry gas.

MEASUREMENTS AND MAIN RESULTS

Blood flow groups were compared during spontaneous breathing, conventional mechanical ventilation, high-frequency jet ventilation and both ventilation modes, using 37 degrees C humidified or 22 degrees C dry inspired gas. Groups were compared, using an analysis of variance with a Newman-Keul's post-test. Regional tracheal blood flow was measured, using radioactive microspheres. Cardiac output and organ blood flows were also monitored. Tracheal blood flow increased 10.3-fold within 30 mins after intubation, but there were no significant differences in regional or total tracheal blood flow between conventional mechanical ventilation and high-frequency jet ventilation, using 37 degrees C humidified gas. Tracheal blood flow was increased further using high-frequency jet ventilation and 25 degrees C dry gas but not conventional mechanical ventilation with dry gas. Although ventilation reduced cardiac output by approximately 30%, there were no significant differences in organ distribution between modes of ventilation.

CONCLUSIONS

Acute tracheal hyperemia occurred with intubation and ventilation with both conventional mechanical ventilation and high-frequency jet ventilation but no differences were observed between ventilation modes. Hyperemia was further increased with cool, dry inspired gas, using high-frequency jet ventilation but not conventional mechanical ventilation. Although acute tracheal ischemia was not produced by high-frequency jet ventilation or conventional mechanical ventilation, factors which alter the balance between arterial supply and metabolic demand or induce inflammation may contribute to the tracheal necrosis reported during sustained ventilation.