QTL analysis for ascochyta blight resistance in an intraspecific population of chickpea (Cicer arietinum L.)

Genomics-assisted genetics of complex region from chickpea chromosome 4 reveals two candidate genes for Ascochyta blight resistance

Ascochyta blight (AB) disease caused by the fungus Ascochyta rabiei is a major threat to global chickpea production. Molecular breeding for improved AB resistance requires the identification of robust fine-mapped QTLs/candidate genes and associated markers. Earlier, we identified three QTLs (qABR4.1, qABR4.2, and qABR4.3) for AB resistance on chickpea chromosome 4 by employing multiple quantitative trait loci sequencing strategy on an intra-specific (FLIP84-92C x PI359075) and an inter-specific (FLIP84-92C x PI599072) crosses derived recombinant inbred lines. Here, we report the identification of AB resistance providing candidate genes under the fine mapped qABR4.2 and qABR4.3 genomic region by combining genetic mapping, haplotype block inheritance, and expression analysis. The qABR4.2 region was narrowed down from 5.94Mb to ~800kb. Among 34 predicted gene models, a secreted class III peroxidase encoding gene showed higher expression in AB resistant parent after A. rabiei conidia inoculation. Under qABR4.3, we identified a frame-shift mutation in a cyclic nucleotide-gated channel CaCNGC1 gene leading to the truncated N-terminal domain in resistant accession of chickpea. This N-terminal domain of CaCNGC1 interacts with chickpea calmodulin. Thus, our analysis has revealed narrowed genomic regions and their associated polymorphic markers, CaNIP43 and CaCNGCPD1. These co-dominant markers significantly associate with AB resistance on qABR4.2 and qABR4.3 regions. Our genetic analysis revealed that the presence of resistant alleles for two major QTLs (qABR4.1 and qABR4.2) together provide AB resistance in the field while minor QTL qABR4.3 determines the degree of resistance. The identified candidate genes and their diagnostic markers will help in biotechnological and AB resistance introgression into farmers adapted local chickpea varieties.

Ascochyta rabiei: A threat to global chickpea production

The necrotrophic fungus Ascochyta rabiei causes Ascochyta blight (AB) disease in chickpea. A. rabiei infects all aerial parts of the plant, which results in severe yield loss. At present, AB disease occurs in most chickpea-growing countries. Globally increased incidences of A. rabiei infection and the emergence of new aggressive isolates directed the interest of researchers toward understanding the evolution of pathogenic determinants in this fungus. In this review, we summarize the molecular and genetic studies of the pathogen along with approaches that are helping in combating the disease. Possible areas of future research are also suggested.

TAXONOMY

kingdom Mycota, phylum Ascomycota, class Dothideomycetes, subclass Coelomycetes, order Pleosporales, family Didymellaceae, genus Ascochyta, species rabiei.

PRIMARY HOST

A. rabiei survives primarily on Cicer species.

DISEASE SYMPTOMS

A. rabiei infects aboveground parts of the plant including leaves, petioles, stems, pods, and seeds. The disease symptoms first appear as watersoaked lesions on the leaves and stems, which turn brown or dark brown. Early symptoms include small circular necrotic lesions visible on the leaves and oval brown lesions on the stem. At later stages of infection, the lesions may girdle the stem and the region above the girdle falls off. The disease severity increases at the reproductive stage and rounded lesions with concentric rings, due to asexual structures called pycnidia, appear on leaves, stems, and pods. The infected pod becomes blighted and often results in shrivelled and infected seeds.

DISEASE MANAGEMENT STRATEGIES

Crop failures may be avoided by judicious practices of integrated disease management based on the use of resistant or tolerant cultivars and growing chickpea in areas where conditions are least favourable for AB disease development. Use of healthy seeds free of A. rabiei, seed treatments with fungicides, and proper destruction of diseased stubbles can also reduce the fungal inoculum load. Crop rotation with nonhost crops is critical for controlling the disease. Planting moderately resistant cultivars and prudent application of fungicides is also a way to combat AB disease. However, the scarcity of AB-resistant accessions and the continuous evolution of the pathogen challenges the disease management process.

USEFUL WEBSITES

https://www.ndsu.edu/pubweb/pulse-info/resourcespdf/Ascochyta%20blight%20of%20chickpea.pdf https://saskpulse.com/files/newsletters/180531_ascochyta_in_chickpeas-compressed.pdf http://www.pulseaus.com.au/growing-pulses/bmp/chickpea/ascochyta-blight http://agriculture.vic.gov.au/agriculture/pests-diseases-and-weeds/plant-diseases/grains-pulses-and-cereals/ascochyta-blight-of-chickpea http://www.croppro.com.au/crop_disease_manual/ch05s02.php https://www.northernpulse.com/uploads/resources/722/handout-chickpeaascochyta-nov13-2011.pdf http://oar.icrisat.org/184/1/24_2010_IB_no_82_Host_Plant https://www.crop.bayer.com.au/find-crop-solutions/by-pest/diseases/ascochyta-blight.

A kabuli chickpea ideotype

The concept of 'crop ideotype' is coined as a desirable plant model expected to better perform for seed yield, oils and other useful characteristics when developed as a cultivar, and it consists of two major approaches, namely, (i) 'defect elimination', that is, integration of disease resistance to a susceptible genotype from a resistant genotype and (ii) 'selection for yield' by improving yield after crosses between desirable parents. For consideration of these approaches, here we introduced an ideotype in kabuli chickpea (Cicer arietinum L.) which is high-yielding, extra-large-seeded, and double- or multi-podded, has high plant height and imparipinnate-leafed traits, and is heat tolerant and resistant to ascochyta blight [Ascochyta rabiei (Pass.) Labr.], which causes considerable yield losses, via marker-assisted selection. F3 and F4 lines were evaluated for agro-morphological traits divided into six classes, namely, (i) imparipinnate-leafed and single-podded progeny, (ii) imparipinnate-leafed and double-podded progeny, (iii) imparipinnate-leafed and multi-podded progeny, (iv) unifoliolate-leafed and single-podded progeny, (v) unifoliolate-leafed and double-podded progeny, (vi) unifoliolate-leafed and multi-podded progeny. F3:4 lines having 100-seed weight ≥ 45 g and double- or multi-podded traits were additionally assessed for resistance to ascochyta blight using molecular markers including SCY17590 and CaETR-1. Superior lines having higher values than their best parents were determined for all studied traits indicating that economic and important traits including yield and seed size in chickpea could be improved by crossing suitable parents. Imparipinnate-leafed and multi-podded plants had not only the highest number of pods and seeds per plant but also the highest yield. On the other hand, imparipinnate-leafed and single podded progeny had the largest seed size, followed by imparipinnate-leafed and double-podded progeny. Multi-podded plants produced 23% more seed yield than that of single-podded plants, while multi-podded plants attained 7.6% more seed yield than that of double-podded plants. SCY17590 and CaETR-1 markers located on LG4 related to QTLAR2 and QTLAR1 were found in 14 lines among 152 F3:4 lines. Six superior lines were selected for being double- or multi-podded, imparipinnate-leafed, suitable for combine harvest, heat-tolerant, and resistant to ascochyta blight, and having both of two resistance markers and extra-large seeds as high as 50-60 g per 100-seed weight. Resistance alleles from two different backgrounds for resistance to ascochyta blight were integrated with double- or multi-podded kabuli chickpea lines having high yield, extra-large seeds, high plant height, imparipinnate-leaves and high heat tolerance, playing a crucial role for future demands of population and food security. These approaches seem to be applicable in ideotype breeding for other important crop plants.

Genome-Wide Association Analyses Track Genomic Regions for Resistance to Ascochyta rabiei in Australian Chickpea Breeding Germplasm

Ascochyta blight (AB), caused by a necrotrophic fungus, Ascochyta rabiei (syn. Phoma rabiei) has the potential to destroy the chickpea industry worldwide, due to limited sources of genetic resistance in the cultivated gene pool, high evolutionary potential of the pathogen and challenges with integrated disease management. Therefore, the deployment of stable genetic resistance in new cultivars could provide an effective disease control strategy. To investigate the genetic basis of AB resistance, genotyping-by-sequencing based DArTseq-single nucleotide polymorphism (SNP) marker data along with phenotypic data of 251 advanced breeding lines and chickpea cultivars were used to perform genome-wide association (GWAS) analysis. Host resistance was evaluated seven weeks after sowing using two highly aggressive single spore isolates (F17191-1 and TR9571) of A. rabiei. GWAS analyses based on single-locus and multi-locus mixed models and haplotyping trend regression identified twenty-six genomic regions on Ca1, Ca4, and Ca6 that showed significant association with resistance to AB. Two haplotype blocks (HB) on chromosome Ca1; HB5 (992178-1108145 bp), and HB8 (1886221-1976301 bp) were associated with resistance against both isolates. Nine HB on the chromosome, Ca4, spanning a large genomic region (14.9-56.6 Mbp) were also associated with resistance, confirming the role of this chromosome in providing resistance to AB. Furthermore, trait-marker associations in two F₃ derived populations for resistance to TR9571 isolate at the seedling stage under glasshouse conditions were also validated. Eighty-nine significantly associated SNPs were located within candidate genes, including genes encoding for serine/threonine-protein kinase, Myb protein, quinone oxidoreductase, and calmodulin-binding protein all of which are implicated in disease resistance. Taken together, this study identifies valuable sources of genetic resistance, SNP markers and candidate genes underlying genomic regions associated with AB resistance which may enable chickpea breeding programs to make genetic gains via marker-assisted/genomic selection strategies.

Effects of Host Plant Resistance and Fungicide Applications on Ascochyta Blight Symptomology and Yield of Chickpea

Ascochyta blight (AB), caused by the pathogen Ascochyta rabiei, is a major threat to chickpea production worldwide, causing major yield losses and decreasing quality. Control of AB requires integrating pest management options including resistant cultivars and fungicide applications. To address this, fungicides with different modes of action were evaluated on three chickpea cultivars with differing levels of susceptibility to AB under irrigated and dryland conditions in 2015 to 2017. The fungicides were applied once or twice and compared with a no-fungicide application control on AB score and yield. The mean grain yields across locations and years were 1,753, 1,283, and 981 kg/ha, with a corresponding AB mean score of 2.6, 3.2, and 3.3 on 0 to 7 scale (where 0 is no disease and 7 is completely dead) for the moderately resistant, moderately susceptible, and susceptible chickpea cultivars, respectively. Fungicide application was not enough to control disease throughout the season. The use of AB-resistant cultivars had the most significant impact on minimizing the disease and maximizing yield, irrespective of year and location. This study supports previous research indicating that planting AB-resistant chickpea cultivars is essential for disease control, regardless of the fungicides applied.

Identification of novel resistant sources for ascochyta blight (Ascochyta rabiei) in chickpea

Chickpea (Cicer arietinum L.) is the second largest pulse crop grown worldwide and ascochyta blight caused by Ascochyta rabiei (Pass.) Labr. is the most devastating disease of the crop in all chickpea growing areas across the continents. The pathogen A. rabiei is highly variable. The resistant sources available are not sufficient and new sources needs to be identified from time to time as resistance breakdown in existing chickpea varieties is very frequent due to fast evolution of new pathotypes of the pathogen. Therefore, this work was undertaken to evaluate the existing chickpea germplasm diversity conserved in Indian National Genebank against the disease under artificial epiphytotic conditions. An artificial standard inoculation procedure was followed for uniform spread of the pathogen. During the last five winter seasons from 2014-15 to 2018-19, a total of 1,970 accessions have been screened against the disease and promising accessions were identified and validated. Screening has resulted in identification of some promising chickpea accessions such as IC275447, IC117744, EC267301, IC248147 and EC220109 which have shown the disease resistance (disease severity score ≤3) in multiple seasons and locations. Promising accessions can serve as the potential donors in chickpea improvement programs. The frequency of resistant and moderately resistant type accessions was comparatively higher in accessions originated from Southwest Asian countries particularly Iran and Syria than the accessions originated from Indian sub-continent. Further large scale screening of chickpea germplasm originated from Southwest Asia may result in identifying new resistant sources for the disease.

Updates on Genomic Resources in Chickpea for Crop Improvement

In recent years, rapid advancement has been done in generation of genomic resources for the important legume crop chickpea. Here, we provide an update on important advancements made on availability of genomic resources for this crop. The availability of reference genome and transcriptome sequences, and resequencing of several accessions have enabled the discovery of gene space and molecular markers in chickpea. These resources have helped in elucidating evolutionary relationship and identification of quantitative trait loci for important agronomic traits. Gene expression in different tissues/organs during development and under abiotic/biotic stresses has been interrogated. In addition, single-base resolution DNA methylation patterns in different organs have been analyzed to understand gene regulation. Overall, we provide a consolidated overview of available genomic resources of chickpea that may help in fulfilling the promises for improvement of this important crop.

Genome-wide SNP discovery for development of high-density genetic map and QTL mapping of ascochyta blight resistance in chickpea (Cicer arietinum L.)

A high-density linkage map of chickpea using 3430 SNPs was constructed and used to identify QTLs and candidate genes for ascochyta blight resistance in chickpea. Chickpea cultivation in temperate conditions is highly vulnerable to ascochyta blight infection. Cultivation of resistant cultivars in combination with fungicide application within an informed disease management package is the most effective method to control ascochyta blight in chickpeas. Identifying new sources of resistance is critical for continued improvement in ascochyta blight resistance in chickpea. The objective of this study was to identify genetic loci and candidate genes controlling the resistance to ascochyta blight in recombinant inbred lines derived from crossing cultivars Amit and ICCV 96029. The RILs were genotyped using the genotyping-by-sequencing procedure and Illumina^® GoldenGate array. The RILs were evaluated in the field over three site-years and in three independent greenhouse experiments. A genetic map with eight linkage groups was constructed using 3430 SNPs. Eight QTLs for resistance were identified on chromosomes 2, 3, 4, 5 and 6. The QTLs individually explained 7-40% of the phenotypic variations. The QTLs on chromosomes 2 and 6 were associated with the resistance at vegetative stage only. The QTLs on chromosomes 2 and 4 that were previously reported to be conserved across diverse genetic backgrounds and against different isolates of Ascochyta rabiei were confirmed in this study. Candidate genes were identified within the QTL regions. Their co-localization with the underlying QTLs was confirmed by genetic mapping. The candidate gene-based SNP markers would lead to more efficient marker-assisted selection for ascochyta blight resistance and would provide a framework for fine mapping and subsequent cloning of the genes associated with the resistance.

QTL sequencing strategy to map genomic regions associated with resistance to ascochyta blight in chickpea

Whole-genome sequencing-based bulked segregant analysis (BSA) for mapping quantitative trait loci (QTL) provides an efficient alternative approach to conventional QTL analysis as it significantly reduces the scale and cost of analysis with comparable power to QTL detection using full mapping population. We tested the application of next-generation sequencing (NGS)-based BSA approach for mapping QTLs for ascochyta blight resistance in chickpea using two recombinant inbred line populations CPR-01 and CPR-02. Eleven QTLs in CPR-01 and six QTLs in CPR-02 populations were mapped on chromosomes Ca1, Ca2, Ca4, Ca6 and Ca7. The QTLs identified in CPR-01 using conventional biparental mapping approach were used to compare the efficiency of NGS-based BSA in detecting QTLs for ascochyta blight resistance. The QTLs on chromosomes Ca1, Ca4, Ca6 and Ca7 overlapped with the QTLs previously detected in CPR-01 using conventional QTL mapping method. The QTLs on chromosome Ca4 were detected in both populations and overlapped with the previously reported QTLs indicating conserved region for ascochyta blight resistance across different chickpea genotypes. Six candidate genes in the QTL regions identified using NGS-based BSA on chromosomes Ca2 and Ca4 were validated for their association with ascochyta blight resistance in the CPR-02 population. This study demonstrated the efficiency of NGS-based BSA as a rapid and cost-effective method to identify QTLs associated with ascochyta blight in chickpea.

mQTL-seq and classical mapping implicates the role of an AT-HOOK MOTIF CONTAINING NUCLEAR LOCALIZED (AHL) family gene in Ascochyta blight resistance of chickpea

Ascochyta blight (AB) caused by the fungal pathogen Ascochyta rabiei is a serious foliar disease of chickpea (Cicer arietinum L.). Despite many genetic studies on chickpea-Ascochyta interaction, genome-wide scan of chickpea for the identification of AB-associated quantitative trait loci (QTLs) and their gene(s) has not been accomplished. To elucidate narrow QTLs for AB resistance, here, we report the use of multiple QTL-sequencing approach on 2 sets of extreme AB phenotype bulks derived from Cicer intraspecific and interspecific crosses. Two major QTLs, qABR4.1 and qABR4.2, and a minor QTL, qABR4.3, were identified on assembled chickpea pseudomolecule 4. We narrowed qABR4.1 to a "robust region" at 4.568-4.618 Mb through mapping on a larger intraspecific cross-derived population and comparative analysis. Among 4 genes, the CaAHL18 gene showed higher expression under Ascochyta stress in AB resistant parent suggesting that it is the candidate gene under "robust qABR4.1." Dual-luciferase assay with CaAHL18 polymorphic cis-regulatory sequences showed that allelic variation is associated with higher expression. Thus, our findings on chickpea-Ascochyta interaction have narrowed down AB resistance associated QTLs on chickpea physical map. The narrowed QTLs and gene-associated markers will help in biotechnological and breeding programs for chickpea improvement.

Current advances in chickpea genomics: applications and future perspectives

Chickpea genomics promises to illuminate our understanding of genome organization, structural variations, evolutionary and domestication-related insights and fundamental biology of legume crops. Unprecedented advancements of next generation sequencing (NGS) technologies have enabled in decoding of multiple chickpea genome sequences and generating huge genomic resources in chickpea both at functional and structural level. This review is aimed to update the current progress of chickpea genomics ranging from high density linkage map development, genome-wide association studies (GWAS), functional genomics resources for various traits, emerging role of abiotic stress responsive coding and non-coding RNAs after the completion of draft chickpea genome sequences. Additionally, the current efforts of whole genome re-sequencing (WGRS) approach of global chickpea germplasm to capture the global genetic diversity existing in the historically released varieties across the world and increasing the resolution of the previously identified candidate gene(s) of breeding importance have been discussed. Thus, the outcomes of these genomics resources will assist in genomics-assisted selection and facilitate breeding of climate-resilient chickpea cultivars for sustainable agriculture.

QTL mapping of early flowering and resistance to ascochyta blight in chickpea

In western Canada, chickpea (Cicer arietinum L.) production is challenged by short growing seasons and infestations with ascochyta blight. Research was conducted to determine the genetic basis of the association between flowering time and reaction to ascochyta blight in chickpea. Ninety-two chickpea recombinant inbred lines (RILs) developed from a cross between ICCV 96029 and CDC Frontier were evaluated for flowering responses and ascochyta blight reactions in growth chambers and fields at multiple locations and during several years. A wide range of variation was exhibited by the RILs for days to flower, days to maturity, node of first flowering, plant height, and ascochyta blight resistance. Moderate to high broad sense heritability was estimated for ascochyta blight reaction (H(2) = 0.14-0.34) and for days to flowering (H(2) = 0.45-0.87) depending on the environments. Negative correlations were observed among the RILs for days to flowering and ascochyta blight resistance, ranging from r = -0.21 (P < 0.05) to -0.58 (P < 0.0001). A genetic linkage map consisting of eight linkage groups was developed using 349 SNP markers. Seven QTLs for days to flowering were identified that individually explained 9%-44% of the phenotypic variation. Eight QTLs were identified for ascochyta blight resistance that explained phenotypic variation ranging from 10% to 19%. Clusters of QTLs for days to flowering and ascochyta blight resistances were found on chromosome 3 at the interval of 8.6-23.11 cM and on chromosome 8 at the interval of 53.88-62.33 cM.

Genetic Analysis of NBS-LRR Gene Family in Chickpea and Their Expression Profiles in Response to Ascochyta Blight Infection

Ascochyta blight is one of the major diseases of chickpea worldwide. The genetic resistance to ascochyta blight in chickpea is complex and governed by multiple QTLs. However, the molecular mechanism of quantitative disease resistance to ascochyta blight and the genes underlying these QTLs are still unknown. Most often disease resistance is determined by resistance (R) genes. The most predominant R-genes contain nucleotide binding site and leucine rich repeat (NBS-LRR) domains. A total of 121 NBS-LRR genes were identified in the chickpea genome. Ninety-eight of these genes contained all essential conserved domains while 23 genes were truncated. The NBS-LRR genes were grouped into eight distinct classes based on their domain architecture. Phylogenetic analysis grouped these genes into two major clusters based on their structural variation, the first cluster with toll or interleukin-1 like receptor (TIR) domain and the second cluster either with or without a coiled-coil domain. The NBS-LRR genes are distributed unevenly across the eight chickpea chromosomes and nearly 50% of the genes are present in clusters. Thirty of the NBS-LRR genes were co-localized with nine of the previously reported ascochyta blight QTLs and were tested as potential candidate genes for ascochyta blight resistance. Expression pattern of these genes was studied in two resistant (CDC Corinne and CDC Luna) and one susceptible (ICCV 96029) genotypes at different time points after ascochyta blight infection using real-time quantitative PCR. Twenty-seven NBS-LRR genes showed differential expression in response to ascochyta blight infection in at least one genotype at one time point. Among these 27 genes, the majority of the NBS-LRR genes showed differential expression after inoculation in both resistant and susceptible genotypes which indicates the involvement of these genes in response to ascochyta blight infection. Five NBS-LRR genes showed genotype specific expression. Our study provides a new insight of NBS-LRR gene family in chickpea and the potential involvement of NBS-LRR genes in response to ascochyta blight infection.

Development of molecular map and identification of QTLs linked to Fusarium wilt resistance in chickpea

A number of genetic maps for Fusarium wilt resistance in chickpea have been reported in earlier studies, however QTLs identified for Fusarium wilt resistance were unstable. Hence, the present study aims to map novel molecular markers and to identify QTLs for Fusarium wilt resistance in chickpea. An intraspecific linkage map of chickpea (Cicer arietinum L.) was constructed using F10-F11 recombinant inbred lines (RILs) derived from a cross between K850 and WR315 segregating for H2 locus. A set of 31 polymorphic simple sequence repeat (SSR) markers obtained by screening 300 SSRs and were used for genotyping. The linkage map had four linkage groups and coverage of 690 cM with a marker density of 5.72 cM. The RILs were screened for their wilt reaction across two seasons in wilt sick plot at International Crop Research Institute for Semi-Arid Tropics (ICRISAT), Hyderabad, India. Five major quantitative trait loci (QTLs) were detected in both seasons for late wilting (60 days after sowing). A stable QTL (GSSR 18-TC14801) for wilt resistance was identified in both the seasons, and the QTL explained a variance of 69.80 and 60.80% in 2007 and 2008 rabi respectively.

Defence gene expression profiling to Ascochyta rabiei aggressiveness in chickpea

Significant differences in defence pathway-related gene expression were observed among chickpea cultivars following A. rabiei infection. Differential gene expression is indicative of diverse resistances, a theoretical tool for selective breeding. A high number of Ascochyta rabiei pathotypes infecting chickpea in Australia has severely hampered efforts towards breeding for sustained quantitative resistance in chickpea. Breeding for sustained resistance will be aided by detailed knowledge of defence responses to isolates with different aggressiveness. As an initial step, the conserved and differential expressions of a suit of previously characterised genes known to be involved in fungal defence mechanisms were assessed among resistant and susceptible host genotypes following inoculation with high or low aggressive A. rabiei isolates. Using quantitative Real-Time PCR (qRT-PCR), 15 defence-related genes, normalised with two reference genes, were temporally differentially expressed (P < 0.005) as early as 2 h post inoculation of Genesis090 (resistant) or Kaniva (susceptible). The highly aggressive isolate, 09KAL09, induced vastly different expression profiles of eight key defence-related genes among resistant and susceptible genotypes. Six of these same genes were differentially expressed among ten host genotypes, inclusive of the best resistance sources within the Australian chickpea breeding program, indicating potential use for discrimination and selection of resistance "type" in future breeding pursuits.

Genetic diversity and association mapping of iron and zinc concentrations in chickpea (Cicer arietinum L.)

Chickpea (Cicer arietinum L.) is the world's second most important pulse crop after common bean. Chickpea has historically been an important daily staple in the diet of millions of people, especially in the developing countries. Current chickpea breeding programs have mainly been directed toward high yield, biotic and abiotic stress resilience that has increased global production, but less attention has been directed toward improving micronutrient concentrations in seeds. In an effort to develop micronutrient-dense chickpea lines, a study to examine the variability and to identify SNP alleles associated with seed iron and zinc concentrations was conducted using 94 diverse accessions of chickpea. The results indicated that there is substantial variability present in chickpea germplasm for seed iron and zinc concentrations. In the current set of germplasm, zinc is negatively correlated with grain yield across all locations and years; whereas the negative correlation between iron and grain yield was only significant at the Elrose locality. Eight SNP loci associated with iron and (or) zinc concentrations in chickpea seeds were identified. One SNP located on chromosome 1 (chr1) is associated with both iron and zinc concentrations. On chr4, three SNPs associated with zinc concentration and two SNPs for iron concentration were identified. Two additional SNP loci, one on chr6 and the other on chr7, were also found to be associated with iron and zinc concentrations, respectively. The results show potential opportunity for molecular breeding for improvement of seed iron and zinc concentrations in chickpea.

Genome wide SNP identification in chickpea for use in development of a high density genetic map and improvement of chickpea reference genome assembly

BACKGROUND

In the whole genome sequencing, genetic map provides an essential framework for accurate and efficient genome assembly and validation. The main objectives of this study were to develop a high-density genetic map using RAD-Seq (Restriction-site Associated DNA Sequencing) genotyping-by-sequencing (RAD-Seq GBS) and Illumina GoldenGate assays, and to examine the alignment of the current map with the kabuli chickpea genome assembly.

RESULTS

Genic single nucleotide polymorphisms (SNPs) totaling 51,632 SNPs were identified by 454 transcriptome sequencing of Cicer arietinum and Cicer reticulatum genotypes. Subsequently, an Illumina GoldenGate assay for 1,536 SNPs was developed. A total of 1,519 SNPs were successfully assayed across 92 recombinant inbred lines (RILs), of which 761 SNPs were polymorphic between the two parents. In addition, the next generation sequencing (NGS)-based GBS was applied to the same population generating 29,464 high quality SNPs. These SNPs were clustered into 626 recombination bins based on common segregation patterns. Data from the two approaches were used for the construction of a genetic map using a population derived from an intraspecific cross. The map consisted of 1,336 SNPs including 604 RAD recombination bins and 732 SNPs from Illumina GoldenGate assay. The map covered 653 cM of the chickpea genome with an average distance between adjacent markers of 0.5 cM. To date, this is the most extensive genetic map of chickpea using an intraspecific population. The alignment of the map with the CDC Frontier genome assembly revealed an overall conserved marker order; however, a few local inconsistencies within the Cicer arietinum pseudochromosome 1 (Ca1), Ca5 and Ca8 were detected. The map enabled the alignment of 215 unplaced scaffolds from the CDC Frontier draft genome assembly. The alignment also revealed varying degrees of recombination rates and hotspots across the chickpea genome.

CONCLUSIONS

A high-density genetic map using RAD-Seq GBS and Illumina GoldenGate assay was developed and aligned with the existing kabuli chickpea draft genome sequence. The analysis revealed an overall conserved marker order, although some localized inversions between draft genome assembly and the genetic map were detected. The current analysis provides an insight of the recombination rates and hotspots across the chickpea genome.

Fast track genetic improvement of ascochyta blight resistance and double podding in chickpea by marker-assisted backcrossing

Ascochyta blight (AB) caused by the fungus Ascochyta rabiei Pass. Lab. is one of the major diseases of chickpea worldwide and a constraint to production in western Canada. The use of varieties with high levels of resistance is considered the most economical solution for long-term ascochyta blight management in chickpea. QTL for resistance to ascochyta blight have been identified in chickpea. The availability of molecular markers associated with QTL for ascochyta blight resistant and double podding provides an opportunity to apply marker-assisted backcrossing to introgress the traits into adapted chickpea cultivars. In the present study, molecular markers that were linked to the QTL for ascochyta blight resistance and the double podding trait, and those unlinked to the resistance were used in foreground and background selection, respectively, in backcrosses between moderately resistant donors (CDC Frontier and CDC 425-14) and the adapted varieties (CDC Xena, CDC Leader and FLIP98-135C). The strategy included two backcrosses and selection for two QTL for ascochyta blight resistance and a locus associated with double podding. The fixation of the elite genetic background was monitored with 16-22 SSR markers to accelerate restoration of the genetic background at each backcross. By the BC2F1 generation, plants with improved ascochyta blight resistance and double podding were identified. The selected plants possessed the majority of elite parental type SSR alleles on all fragments analyzed except the segment of LG 4, LG 6 and LG 8 that possessed the target QTL. The results showed that the adapted variety could be efficiently converted into a variety with improved resistance in two backcross generations.

Differential transcript accumulation in chickpea during early phases of compatible interaction with a necrotrophic fungus Ascochyta rabiei

The initial phases of the disease establishment are very crucial for the compatible interactions. Pathogens must overcome the responses generated by the host for the onset of disease invasion. The compatible interaction is inadequately represented in plant-pathogen interaction studies. To gain broader insight into the early responses elicited by chickpea blight fungus Ascochyta rabiei during compatible interaction; we isolated early responsive genes of chickpea using PCR based suppression subtractive hybridization (SSH) strategy. We obtained ~250 unique genes after homology search and redundancy elimination. Based on their potential cellular functions, these genes were broadly classified into eleven different categories viz. stress, signaling, gene regulation, cellular metabolism and genes of unknown functions. Present study revealed few unexpected genes which have a possible role in induced immunity and disease progression. We employed macroarray, northern blot, real-time PCR and cluster analysis to develop transcript profiles. Most of the genes analyzed were early induced and were transcriptionally upregulated upon 24 h post inoculation. Our approach has rendered the isolation of early responsive genes involved in signaling and regulation of metabolic changes upon fungal infection. The information obtained will help to dissect the molecular mechanisms during compatible chickpea-Ascochyta interactions.

Bacterial artificial chromosome libraries of pulse crops: characteristics and applications

Pulse crops are considered minor on a global scale despite their nutritional value for human consumption. Therefore, they are relatively less extensively studied in comparison with the major crops. The need to improve pulse crop production and quality will increase with the increasing global demand for food security and people's awareness of nutritious food. The improvement of pulse crops will require fully utilizing all their genetic resources. Bacterial artificial chromosome (BAC) libraries of pulse crops are essential genomic resources that have the potential to accelerate gene discovery and enhance molecular breeding in these crops. Here, we review the availability, characteristics, applications, and potential applications of the BAC libraries of pulse crops.

A BAC/BIBAC-based physical map of chickpea, Cicer arietinum L

Background

Chickpea (Cicer arietinum L.) is the third most important pulse crop worldwide. Despite its importance, relatively little is known about its genome. The availability of a genome-wide physical map allows rapid fine mapping of QTL, development of high-density genome maps, and sequencing of the entire genome. However, no such a physical map has been developed in chickpea.

Results

We present a genome-wide, BAC/BIBAC-based physical map of chickpea developed by fingerprint analysis. Four chickpea BAC and BIBAC libraries, two of which were constructed in this study, were used. A total of 67,584 clones were fingerprinted, and 64,211 (~11.7 ×) of the fingerprints validated and used in the physical map assembly. The physical map consists of 1,945 BAC/BIBAC contigs, with each containing an average of 28.3 clones and having an average physical length of 559 kb. The contigs collectively span approximately 1,088 Mb. By using the physical map, we identified the BAC/BIBAC contigs containing or closely linked to QTL4.1 for resistance to Didymella rabiei (RDR) and QTL8 for days to first flower (DTF), thus further verifying the physical map and confirming its utility in fine mapping and cloning of QTL.

Conclusion

The physical map represents the first genome-wide, BAC/BIBAC-based physical map of chickpea. This map, along with other genomic resources previously developed in the species and the genome sequences of related species (soybean, Medicago and Lotus), will provide a foundation necessary for many areas of advanced genomics research in chickpea and other legume species. The inclusion of transformation-ready BIBACs in the map greatly facilitates its utility in functional analysis of the legume genomes.

Extension of the core map of common bean with EST-SSR, RGA, AFLP, and putative functional markers

Microsatellites and gene-derived markers are still underrepresented in the core molecular linkage map of common bean compared to other types of markers. In order to increase the density of the core map, a set of new markers were developed and mapped onto the RIL population derived from the 'BAT93' x 'Jalo EEP558' cross. The EST-SSR markers were first characterized using a set of 24 bean inbred lines. On average, the polymorphism information content was 0.40 and the mean number of alleles per locus was 2.7. In addition, AFLP and RGA markers based on the NBS-profiling method were developed and a subset of the mapped RGA was sequenced. With the integration of 282 new markers into the common bean core map, we were able to place markers with putative known function in some existing gaps including regions with QTL for resistance to anthracnose and rust. The distribution of the markers over 11 linkage groups is discussed and a newer version of the common bean core linkage map is proposed.

Genetic analyses and conservation of QTL for ascochyta blight resistance in chickpea (Cicer arietinum L.)

Ascochyta blight (AB) caused by Ascochyta rabiei (teleomorph, Didymella rabiei) Pass. Lab. is an important fungal disease of chickpea worldwide. Only moderate sources of resistance are available within the cultivated species and we hypothesized that the available sources may carry different genes for resistance, which could be pyramided to improve field resistance to AB. Four divergent moderately resistant cultivars CDC Frontier, CDC Luna, CDC Corinne, and Amit were each crossed to a highly susceptible germplasm ICCV 96029. Parents, F(1) and F(2) generations were evaluated under controlled conditions for their reactions to AB. A total of 144 simple sequence repeat (SSR) markers were first mapped to eight linkage groups (LG) for the CDC Frontier x ICCV 96029 population. Then based on the evidence from this population, 76, 61, and 42 SSR markers were systematically chosen and mapped in CDC Luna, CDC Corinne, and Amit populations, respectively. Frequency distributions of the AB rating in the F(2) generation varied among the four populations. Composite interval mapping revealed five QTLs (QTL1-5), one on each of LG 2, 3, 4, 6, and 8, respectively, distributed across different sources, controlling resistance to AB. CDC Frontier contained QTL2, 3, and 4 that simultaneously accounted for 56% of phenotypic variations. CDC Luna contained QTL 1 and 3. CDC Corinne contained QTL 3 and 5, while only QTL 2 was identified in Amit. Altogether these QTL explained 48, 38, and 14% of the estimated phenotypic variations in CDC Luna, CDC Corinne, and Amit populations, respectively. The results suggested that these QTLs could be combined into a single genotype to enhance field resistance to AB.

Genetic architecture of factors underlying partial resistance to Alternaria leaf blight in carrot

In most production areas, Alternaria leaf blight (ALB) is recognized as the most common and destructive foliage disease in carrot. To assess the genetic architecture of carrot ALB resistance, two parental coupling maps were developed with similar number of dominant markers (around 70), sizes (around 650 cM), densities (around 9.5 cM), and marker composition. The F(2:3) progenies were evaluated in field and tunnel for two scoring dates. The continuous distribution of the disease severity value indicated that ALB resistance is under polygenic control. Three QTLs regions were found on three linkage groups. Two of them were tunnel or field specific and were detected only at the second screening date suggesting that the expression of these two QTLs regions involved in resistance to Alternaria dauci might depend on environment and delay after infection.

Integration of new CAPS and dCAPS-RGA markers into a composite chickpea genetic map and their association with disease resistance

A composite linkage map was constructed based on two interspecific recombinant inbred line populations derived from crosses between Cicer arietinum (ILC72 and ICCL81001) and Cicer reticulatum (Cr5-10 or Cr5-9). These mapping populations segregate for resistance to ascochyta blight (caused by Ascochyta rabiei), fusarium wilt (caused by Fusarium oxysporum f. sp. ciceris) and rust (caused by Uromyces ciceris-arietini). The presence of single nucleotide polymorphisms in ten resistance gene analogs (RGAs) previously isolated and characterized was exploited. Six out of the ten RGAs were novel sequences. In addition, classes RGA05, RGA06, RGA07, RGA08, RGA09 and RGA10 were considerate putatively functional since they matched with several legume expressed sequences tags (ESTs) obtained under infection conditions. Seven RGA PCR-based markers (5 CAPS and 2 dCAPS) were developed and successfully genotyped in the two progenies. Six of them have been mapped in different linkage groups where major quantitative trait loci conferring resistance to ascochyta blight and fusarium wilt have been reported. Genomic locations of RGAs were compared with those of known Cicer R-genes and previously mapped RGAs. Association was detected between RGA05 and genes controlling resistance to fusarium wilt caused by races 0 and 5.

The marker SCK13(603) associated with resistance to ascochyta blight in chickpea is located in a region of a putative retrotransposon

The sequence characterized amplified region (SCAR) marker SCK13(603), associated with ascochyta blight resistance in a chickpea recombinant inbred line (RIL) population, was used as anchored sequence for genome walking. The PCRs performed in the walking steps to walk in the same direction produced eight bands in 5' direction and five bands in 3' direction with a length ranking from 530 to 2,871 bp. The assembly of the bands sequences along with the sequence of SCK13(603) resulted in 7,815 bp contig. Blastn analyses showed stretches of DNA sequence mainly distributed from the nucleotides 1,500 to 4,500 significantly similar to Medicago truncatula genomic DNA. Three open reading frames (ORFs) were identified and blastp analysis of predicted amino acids sequences revealed that ORF1, ORF2 and ORF3 had significant similarity to a CCHC zinc finger protein, to an integrase, and to a precursor of the glucoamylase s1/s2, respectively, from M. truncatula. The high homology of the putative proteins derived from ORF1 and ORF2 with retrotransposon proteins and the prediction of the existence of conserved domains usually present in retrotransposon proteins indicate that the marker SCK13(603) is located in a region of a putative retrotransposon. The information generated in this study has contributed to increase the knowledge of this important region for blight resistance in chickpea.

Molecular genetic diversity and linked resistance to ascochyta blight in Australian chickpea breeding materials and their wild relatives

Simple sequence-repeat (SSR) and sequence characterised amplified regions (SCARs) have been used to characterise the genetic diversity of chickpea germplasm. A set of 48 genotypes comprising cultigen, landraces, and wild relatives important for breeding purposes was used to determine the genetic similarity between genotypes and to assess the association between ascochyta blight (AB) and SCAR phenotypes. The 21 SSR markers amplified a total of 370 alleles, with an average of ~17 alleles per SSR locus among the 48 genotypes. Polymorphic information content (PIC) values ranged from 0.37 for the XGA13 locus to 0.93 for the XGA106. Principal coordinate analysis (PCO) of genetic similarity (GS) estimates revealed a clear differentiation of the chickpea genotypes into 5 groups, which were generally consistent with available pedigree information. Comparison of SCAR and AB phenotypes enabled us to tag the common source(s) of AB resistance in the breeding collection. Based on the SCAR phenotypes, it was evident that the studied chickpea genotypes, including worldwide-known AB-resistant lines (ICC12004, ILC72, ILC3279), carry at least one common source of resistance to AB. Since SSR markers are polymerase chain reaction (PCR)-based markers, highly polymorphic, and amenable to high-throughput technologies, they are therefore well suited for studies of genetic diversity and cultivar identification in chickpea. The broad level of genetic diversity detected in the chickpea germplasm should be useful for selective breeding for specific traits such as AB, backcrossing, and in enhancing the genetic base of breeding programs.

Transcriptional profiling of chickpea genes differentially regulated in response to high-salinity, cold and drought

Background

Cultivated chickpea (Cicer arietinum) has a narrow genetic base making it difficult for breeders to produce new elite cultivars with durable resistance to major biotic and abiotic stresses. As an alternative to genome mapping, microarrays have recently been applied in crop species to identify and assess the function of putative genes thought to be involved in plant abiotic stress and defence responses. In the present study, a cDNA microarray approach was taken in order to determine if the transcription of genes, from a set of previously identified putative stress-responsive genes from chickpea and its close relative Lathyrus sativus, were altered in chickpea by the three abiotic stresses; drought, cold and high-salinity. For this, chickpea genotypes known to be tolerant and susceptible to each abiotic stress were challenged and gene expression in the leaf, root and/or flower tissues was studied. The transcripts that were differentially expressed among stressed and unstressed plants in response to the particular stress were analysed in the context of tolerant/susceptible genotypes.

Results

The transcriptional change of more than two fold was observed for 109, 210 and 386 genes after drought, cold and high-salinity treatments, respectively. Among these, two, 15 and 30 genes were consensually differentially expressed (DE) between tolerant and susceptible genotypes studied for drought, cold and high-salinity, respectively. The genes that were DE in tolerant and susceptible genotypes under abiotic stresses code for various functional and regulatory proteins. Significant differences in stress responses were observed within and between tolerant and susceptible genotypes highlighting the multiple gene control and complexity of abiotic stress response mechanism in chickpea.

Conclusion

The annotation of these genes suggests that they may have a role in abiotic stress response and are potential candidates for tolerance/susceptibility.

Genetic mapping of ascochyta blight resistance in chickpea (Cicer arietinum L.) using a simple sequence repeat linkage map

Ascochyta blight, caused by the fungus Ascochyta rabiei (Pass.) Lab., is one of the most devastating diseases of chickpea (Cicer arietinum L.) worldwide. Research was conducted to map genetic factors for resistance to ascochyta blight using a linkage map constructed with 144 simple sequence repeat markers and 1 morphological marker (fc, flower colour). Stem cutting was used to vegetatively propagate 186 F2 plants derived from a cross between Cicer arietinum L. 'ICCV96029' and 'CDC Frontier'. A total of 556 cutting-derived plants were evaluated for their reaction to ascochyta blight under controlled conditions. Disease reaction of the F1 and F2 plants demonstrated that the resistance was dominantly inherited. A Fain's test based on the means and variances of the ascochyta blight reaction of the F3 families showed that a few genes were segregating in the population. Composite interval mapping identified 3 genomic regions that were associated with the reaction to ascochyta blight. One quantitative trait locus (QTL) on each of LG3, LG4, and LG6 accounted for 13%, 29%, and 12%, respectively, of the total estimated phenotypic variation for the reaction to ascochyta blight. Together, these loci controlled 56% of the total estimated phenotypic variation. The QTL on LG4 and LG6 were in common with the previously reported QTL for ascochyta blight resistance, whereas the QTL on LG3 was unique to the current population.

Expression profiling of chickpea genes differentially regulated during a resistance response to Ascochyta rabiei

Using microarray technology and a set of chickpea (Cicer arietinum L.) unigenes, grasspea (Lathyrus sativus L.) expressed sequence tags (ESTs) and lentil (Lens culinaris Med.) resistance gene analogues, the ascochyta blight (Ascochyta rabiei (Pass.) L.) resistance response was studied in four chickpea genotypes, including resistant, moderately resistant, susceptible and wild relative (Cicer echinospermum L.) genotypes. The experimental system minimized environmental effects and was conducted in reference design, in which samples from mock-inoculated controls acted as reference against post-inoculation samples. Robust data quality was achieved through the use of three biological replicates (including a dye swap), the inclusion of negative controls and strict selection criteria for differentially expressed genes, including a fold change cut-off determined by self-self hybridizations, Student's t-test and multiple testing correction (P < 0.05). Microarray observations were also validated by quantitative reverse transcriptase-polymerase chain reaction (RT-PCR). The time course expression patterns of 756 microarray features resulted in the differential expression of 97 genes in at least one genotype at one time point. k-means clustering grouped the genes into clusters of similar observations for each genotype, and comparisons between A. rabiei-resistant and A. rabiei-susceptible genotypes revealed potential gene 'signatures' predictive of effective A. rabiei resistance. These genes included several pathogenesis-related proteins, SNAKIN2 antimicrobial peptide, proline-rich protein, disease resistance response protein DRRG49-C, environmental stress-inducible protein, leucine-zipper protein, polymorphic antigen membrane protein, Ca-binding protein and several unknown proteins. The potential involvement of these genes and their pathways of induction are discussed. This study represents the first large-scale gene expression profiling in chickpea, and future work will focus on the functional validation of the genes of interest.

Detection of two quantitative trait loci for resistance to ascochyta blight in an intra-specific cross of chickpea (Cicer arietinum L.): development of SCAR markers associated with resistance

Two quantitative trait loci (QTLs), (QTL(AR1) and QTL(AR2)) associated with resistance to ascochyta blight, caused by Ascochyta rabiei, have been identified in a recombinant inbred line population derived from a cross of kabulixdesi chickpea. The population was evaluated in two cropping seasons under field conditions and the QTLs were found to be located in two different linkage groups (LG4a and LG4b). LG4b was saturated with RAPD markers and four of them associated with resistance were sequenced to give sequence characterized amplified regions (SCARs) that segregated with QTL(AR2). This QTL explained 21% of the total phenotypic variation. However, QTL(AR1), located in LG4a, explained around 34% of the total phenotypic variation in reaction to ascochyta blight when scored in the second cropping season. This LG4a region only includes a few markers, the flower colour locus (B/b), STMS GAA47, a RAPD marker and an inter-simple-sequence-repeat and corresponds with a previously reported QTL. From the four SCARs tagging QTL(AR2), SCAR (SCY17(590)) was co-dominant, and the other three were dominant. All SCARs segregated in a 1:1 (presence:absence) ratio and the scoring co-segregated with their respective RAPD markers. QTL(AR2) on LG4b was mapped in a highly saturated genomic region covering a genetic distance of 0.8 cM with a cluster of nine markers (three SCARs, two sequence-tagged microsatellite sites (STMS) and four RAPDs). Two of the four SCARs showed significant alignment with genes or proteins related to disease resistance in other species and one of them (SCK13(603)) was sited in the highly saturated region linked to QTL(AR2). STMS TA72 and TA146 located in LG4b were described in previous maps where QTL for blight resistance were also localized in both inter and intraspecific crosses. These findings may improve the precision of molecular breeding for QTL(AR2) as they will allow the choice of as much polymorphism as possible in any population and could be the starting point for finding a candidate resistant gene for ascochyta blight resistance in chickpea.

Resistance to Ascochyta rabiei (Pass.) Lab. in a wild Cicer germplasm collection

Cultivated chickpea germplasm collections contain a low frequency of ascochyta blight resistant accessions. This might lead to limitations on the future progress of chickpea breeding worldwide. In an effort to identify novel sources of resistance to ascochyta blight, 56 unique accessions, comprising 8 annual wild Cicer species, were evaluated under a controlled environment that was optimal for infection with an aggressive Australian isolate of Ascochyta rabiei (Pass.) Labrousse. The majority of wild Cicer accessions were either susceptible or highly susceptible to A. rabiei 21 days after inoculation; however, 11 accessions, of which 7 were Cicer judaicum, were resistant. The most resistant accession detected in this study, ATC 46934, together with accessions ATC 46892 and ATC 46935, which were resistant in this and another study, should be targeted for use in future interspecific resistance breeding programs.

Ascochyta blight of chickpea (Cicer arietinum L.): a review of biology, pathogenicity, and disease management

Ascochyta blight (AB), caused by Ascochyta rabiei is a major disease of chickpea (Cicer arietinum L.), especially in areas where cool, cloudy, and humid weather persists during the crop season. Several epidemics of AB causing complete yield loss have been reported. The fungus mainly survives between seasons through infected seed and in infected crop debris. Despite extensive pathological and molecular studies, the nature and extent of pathogenic variability in A. rabiei have not been clearly established. Accumulation of phenols, phytoalexins (medicarpin and maackiain), and hydrolytic enzymes has been associated with host-plant resistance (HPR). Seed treatment and foliar application of fungicides are commonly recommended for AB management, but further information on biology and survival of A. rabiei is needed to devise more effective management strategies. Recent studies on inheritance of AB resistance indicate that several quantitative trait loci (QTLs) control resistance. In this paper we review the biology of A. rabiei, HPR, and management options, with an emphasis on future research priorities.

Construction of a linkage map based on a Lathyrus sativus backcross population and preliminary investigation of QTLs associated with resistance to ascochyta blight

A linkage map of the Lathyrus sativus genome was constructed using 92 backcross individuals derived from a cross between an accession resistant (ATC 80878) to ascochyta blight caused by Mycosphaerella pinodes and a susceptible accession (ATC 80407). A total of 64 markers were mapped on the backcross population, including 47 RAPD, seven sequence-tagged microsatellite site and 13 STS/CAPS markers. The map comprised nine linkage groups, covered a map distance of 803.1 cM, and the average spacing between markers was 15.8 cM. Quantitative trait loci (QTL) associated with ascochyta blight resistance were detected using single-point analysis and simple and composite interval mapping. The backcross population was evaluated for stem resistance in temperature-controlled growth room trials. One significant QTL, QTL1, was located on linkage group 1 and explained 12% of the phenotypic variation in the backcross population. A second suggestive QTL, QTL2, was detected on linkage group 2 and accounted for 9% of the trait variation. The L. sativus R-QTL regions detected may be targeted for future intergenus transfer of the trait into accessions of the closely related species Pisum sativum.

Pathotype-specific genetic factors in chickpea (Cicer arietinum L.) for quantitative resistance to ascochyta blight

Ascochyta blight in chickpea ( Cicer arietinum L.) is a devastating fungal disease caused by the necrotrophic pathogen, Ascochyta rabiei (Pass.) Lab. To elucidate the genetic mechanism of pathotype-dependent blight resistance in chickpea, F(7)-derived recombinant inbred lines (RILs) from the intraspecific cross of PI 359075(1) (blight susceptible) x FLIP84-92C(2) (blight resistant) were inoculated with pathotypes I and II of A. rabiei. The pattern of blight resistance in the RIL population varied depending on the pathotype of A. rabiei. Using the same RIL population, an intraspecific genetic linkage map comprising 53 sequence-tagged microsatellite site markers was constructed. A quantitative trait locus (QTL) for resistance to pathotype II of A. rabiei and two QTLs for resistance to pathotype I were identified on linkage group (LG)4A and LG2+6, respectively. A putative single gene designated as Ar19 (or Ar21d) could explain the majority of quantitative resistance to pathotype I. Ar19 (or Ar21d) appeared to be required for resistance to both pathotypes of A. rabiei, and the additional QTL on LG4A conferred resistance to pathotype II of A. rabiei. Further molecular genetic approach is needed to identify individual qualitative blight resistance genes and their interaction for pathotype-dependent blight resistance in chickpea.

Preliminary investigation of QTLs associated with seedling resistance to ascochyta blight from Cicer echinospermum, a wild relative of chickpea

Accessions from Cicer echinospermum, a wild relative of chickpea (Cicer arietinum L.), contain resistance to the fungal disease ascochyta blight, a devastating disease of chickpea. A linkage map was constructed based on an interspecific F(2) population, derived from a cross between a susceptible chickpea cultivar (Lasseter) and a resistant C. echinospermum accession (PI 527930). The linkage map incorporated 83 molecular markers, that included RAPD, ISSR, STMS and RGA markers; eight markers remained unlinked. The map comprised eight linkage groups and covered a map distance of 570 cM. Six out of the eight linkage groups were correlated to linkage groups from the integrated Cicer map using STMS markers. Quantitative trait loci (QTLs) associated with ascochyta blight resistance were detected using interval mapping and single-point analysis. The F(2) population was evaluated for seedling and stem resistance in glasshouse trials. At least two QTLs were identified for seedling resistance, both of which were located within linkage group 4. Five markers were associated with stem resistance, four of which were also associated with seedling resistance. QTLs from previous studies also mapped to LG 4, suggesting that this linkage group is an important region of the Cicer genome for resistance to ascochyta blight.