Treatment of electroplating industry effluent using maize cob carbon

Microbial characterization of heavy metal resistant bacterial strains isolated from an electroplating wastewater treatment plant

Heavy metal pollution is one of the most widespread and complex environmental issues globally, posing a great threat to the ecosystem as well as human health. Bioremediation through heavy metal-resistant bacteria (HMRB) is currently the most promising technology to address this issue. To obtain HMRB to remediate heavy metal pollution potentially, 15 culturable HMRB strains were isolated from the sludge samples of an electroplating wastewater treatment plant (EWWTP), which belonged to the Bacillus, Shewanella, Lysinibacillus, and Acinetobacter genera. Their maximum tolerance concentrations to Cu²⁺, Ni²⁺, Mn²⁺, Co²⁺, and Cr₂O₇^2- were 40 mM, 10 mM, 200 mM, 40 mM, and 10 mM, respectively, and strain Mn1-4 showed much higher Mn²⁺ tolerance and removal effectiveness (3.355 g/L) than previously published reports. Moreover, multiple heavy metal-resistant genotypes and phenotypes were identified among these strains, of which strain Co1-1 carried the most of resistant gene sequences (10) and exhibited resistance to 7 categories of heavy metals, and the co-occurrence of heavy metal and antibiotic resistance were clearly observed in strain Ni1-3. In addition, flanked insert sequence (IS) elements on the heavy metal resistant genes (HMRGs) suggested that horizontal gene transfer (HGT) events may have resulted in multiple heavy metal resistance phenotypes and genotypes in these strains, and IS982 family transposase was presumed to result in the high Ni²⁺ tolerance in strain Ni1-3. This study expands our understanding of bacterial heavy metal resistance and provides promising candidates for heavy metal bioremediation.

Heavy metal contamination and risk assessment in water, paddy soil, and rice around an electroplating plant

PURPOSE

The objective of this paper is to assess the impact of long-term electroplating industrial activities on heavy metal contamination in agricultural soils and potential health risks for local residents.

METHODS

Water, soil, and rice samples were collected from sites upstream (control) and downstream of the electroplating wastewater outlet. The concentrations of heavy metals were determined by an atomic absorption spectrophotometer. Fractionation and risk assessment code (RAC) were used to evaluate the environmental risks of heavy metals in soils. The health risk index (HRI) and hazard index (HI) were calculated to assess potential health risks to local populations through rice consumption.

RESULTS

Hazardous levels of Cu, Cr, and Ni were observed in water and paddy soils at sites near the plant. According to the RAC analysis, the soils showed a high risk for Ni and a medium risk for Cu and Cr at certain sites. The rice samples were primarily contaminated with Ni, followed by Cr and Cu. HRI values >1 were not found for any heavy metal. However, HI values for adults and children were 2.075 and 1.808, respectively.

CONCLUSION

Water, paddy soil, and rice from the studied area have been contaminated by Cu, Cr, and Ni. The contamination of these elements is related to the electroplating wastewater. Although no single metal poses health risks for local residents through rice consumption, the combination of several metals may threaten the health of local residents. Cu and Ni are the key components contributing to the potential health risks.

A comparative study of natural, formaldehyde-treated and copolymer-grafted orange peel for Pb(II) adsorption under batch and continuous mode

Natural, formaldehyde-treated and copolymer-grafted orange peels were evaluated as adsorbents to remove lead ions from aqueous solutions. The optimum pH for lead adsorption was found to be pH 5. The adsorption process was fast, reaching 99% of sorbent capacity in 10 min for the natural and treated biomasses and 20 min for the grafted material. The treated biomass showed the highest sorption rate and capacity in the batch experiments, with the results fitting well to a pseudo-first order rate equation. In the continuous test with the treated biomass, the capacity at complete exhaustion was 46.61 mg g(-1) for an initial concentration of 150 mg L(-1). Scanning electronic microscopy and energy dispersive X-ray spectroscopy indicated that the materials had a rough surface, and that the adsorption of the metal took place on the surface. Fourier transform infrared spectroscopy revealed that the functional groups responsible for metallic biosorption were the -OH, -COOH and -NH(2) groups on the surface. Finally, the thermogravimetric analysis indicates that a mass reduction of 80% can be achieved at 600 degrees C.

Bio-separation of toxic arsenate ions from dilute solutions by native and pretreated biomass of Aspergillus fumigatus in batch and column mode: effect of biomass pretreatment

The sorption of As(V) from aqueous solution onto live and pretreated biomass of Aspergillus fumigatus was studied. The studies on optimization of contact time, adsorbent dosage and pH showed that the FeCl(3) treated and FeSO(4) treated biomass had the maximum capacity to adsorb As(V) while acid treated biomass was found to be minimum. Adsorption parameters were determined using both Langmuir and Freundlich isotherm models. The maximum adsorption capacity of 0.054 mg/g was observed in FeCl(3) treated and FeSO(4) treated biomasses. Column mode studies were conducted using FeSO(4) treated biomass to compare its efficacy with batch mode to adsorb As(V). Batch mode experiments proved to be efficient. Desorption studies were also carried out with dilute sodium hydroxide to recover both the adsorbent and adsorbate.

Biological and electrochemical treatment of used metalworking fluids: a toxicity-reduction evaluation

The aim of this study was to evaluate and compare the toxicity of spent metalworking fluids (MWFs) and two different effluents obtained by biologic and electrochemical treatment of spent MWFs toward aquatic organisms of different trophic levels. The obtained toxicity data was used to calculate safe concentrations of both effluents. The spent MWFs without treatment showed the highest toxicity among the tested samples and should be classified as "extremely toxic" (toward invertebrates) or "very toxic" (toward other test organisms). Both methods applied for MWFs treatment resulted in a significant decrease in toxicity of the treated MWFs, but the obtained effluents had still to be regarded as "toxic". The ranges of the values of acute toxic units for both effluents were significantly narrower than for the untreated spent MWFs. The values of the safe concentrations of the spent MWFs, the biologic effluent, and the water phase resulting from electrochemical emulsion breaking were equal to 0.013%, l.8%, and 1.3%, respectively, corresponding to chemical oxygen demand concentrations of 1.8%, 32, and 34 mg O(2)*L(-1). These values are far lower than the discharging limit of 125 mg O(2)*L(-1) for industrial effluents, according to the relevant Polish regulations. It is therefore recommended to include toxicity bioassay parameters into guidelines for wastewater discharges to surface waters because the existing chemical and physical parameters are not sufficient to describe the environmental impact of industrial wastewater. Toxicity bioassays can be a promising tool for evaluating the efficacy of unit operations in industrial wastewater treatment (toxicity reduction evaluation) as well as identification of toxic substances in effluents (toxicity identification evaluation).

Comparisons of low-cost adsorbents for treating wastewaters laden with heavy metals

In this article, the removal performance and cost-effectiveness of various low-cost adsorbents derived from agricultural waste, industrial by-product or natural material are evaluated and compared to those of activated carbon for the removal of heavy metals (Cd(II), Cr(III), Cr(VI), Cu(II), Ni(II) and Zn(II)) from metals-contaminated wastewater. To highlight their technical applicability, selected information on pH, dose required, initial metal concentration, adsorption capacity and the price of the adsorbents is presented. It is evident from the survey of 102 published studies (1984-2005) that low cost adsorbents derived from agricultural waste have demonstrated outstanding capabilities for the removal of heavy metal (Cr(VI): 170 mg/g of hazelnut shell activated carbon, Ni(II): 158 mg/g of orange peel, Cu(II): 154.9 mg/g of soybean hull treated with NaOH and citric acid, Cd(II): 52.08 mg/g of jackfruit), compared to activated carbon (Cd(II): 146 mg/g, Cr(VI): 145 mg/g, Cr(III): 30 mg/g, Zn(II): 20 mg/g). Therefore, low-cost adsorbents can be viable alternatives to activated carbon for the treatment of metals-contaminated wastewater. It is important to note that the adsorption capacities presented in this paper vary, depending on the characteristics of the individual adsorbent, the extent of surface modification and the initial concentration of the adsorbate. In general, technical applicability and cost-effectiveness are the key factors that play major roles in the selection of the most suitable adsorbent to treat inorganic effluent.

Sorption of Cr(VI) from dilute solutions and wastewater by live and pretreated biomass of Aspergillus flavus

Sorption of Cr(VI) was carried out from dilute solutions using live and pretreated biomass in a batch mode. Effects of agitation time, adsorbent dosage and pH were examined. The autoclaved biomass that showed maximum adsorption capacity (Q(0)=0.335 mg g(-1)) was used as an adsorbent in column studies. The optimized flow rate of 2.5 ml min(-1) and bed height 10 cm were used to determine the effect of metal ion concentration on removal of Cr(VI). Applying the BDST model to calculate the adsorption capacity (N(0)) of column, which showed 4.56 x 10(-5), 7.28 x 10(-5), 6.89 x 10(-5), 3.07 x 10(-5), 2.80 x 10(-5)mg g(-1) for 4, 8, 12, 16 and 20 mg dm(-3) of Cr(VI), respectively. Batch sorption proved to be more efficient than the column sorption and hence batch sorption was used to remove Cr(VI) from a textile dyeing industry wastewater. The phytotoxic effect of treated and untreated wastewater was studied against Zea mays. Toxicity was reduced by 50% in the treated effluent.

Adsorption of Cr(VI) on activated rice husk carbon and activated alumina

The possible use of activated rice husk and activated alumina as the adsorbents of Cr(VI) from synthetic solutions and the effect of operating parameters were investigated. The activated rice husk carbon was prepared thermally in two sizes 0.3 and 1.0 mm. The maximum removal of Cr(VI) occurred at pH 2 by activated rice husk and at pH 4 by activated alumina. The amounts of Cr(VI) adsorbed increased with increase in dose of both adsorbents and their contact time. The Freundlich isotherm was applied.