The Preparation of Biochar Particles from Sludge and Corncobs and Its Pb2+ Adsorption Properties

Removal of cadmium from aqueous solution by magnetic biochar: adsorption characteristics and mechanism

Experiments were conducted to investigate the potential of the efficient resource utilization of waste cow manure and corn straw in an agricultural ecosystem. In this study, a magnetic cow manure and straw biochar were synthesized by a co-precipitation method, and cadmium (Cd(II)) was removed by adsorption in aqueous solution. Several physicochemical characterization techniques were applied, including SEM, BET, Zeta, FTIR, Raman, XPS, and VSM. The effects of pH value, magnetic biochar content, adsorption kinetics, and isothermal adsorption on the adsorption of Cd(II) were investigated. The physicochemical characterizations revealed that the physical and chemical properties of the magnetic biochar were substantially changed compared to the unmodified biochar. The results showed that the surface of the biochar became rough, the number of oxygen (O)-containing functional groups increased, and the specific surface area increased. The results of the adsorption experiments showed that the adsorption capacity was affected by pH, magnetic biochar addition, Cd(II) concentration, and adsorption time. The adsorption kinetics and isothermal adsorption experiments showed that the Cd(II) adsorption processes of the cow manure and corn straw magnetic biochars were consistent with the Freundlich model and pseudo-second-order kinetic model. The results also showed that the Cd(II) adsorption effect of cow manure magnetic biochar was found to be more effective than that of corn straw magnetic biochar. The optimal conditions for Cd(II) adsorption were 800 ℃ for cow manure magnetic biochar, with a pH value of 5 and 0.14 g biochar addition, and 600 ℃ for straw magnetic biochar with a pH value of 8 and 0.12 g biochar addition. In conclusion, the cow manure magnetic biochar was an effective adsorbent for the absorption of Cd(II) in wastewater.

A review of prospects and current scenarios of biomass co-pyrolysis for water treatment

With ever-growing population comes an increase in waste and wastewater generated. There is ongoing research to not only reduce the waste but also to increase its value commercially. One method is pyrolysis, a process that converts wastes, at temperatures usually above 300 °C in a pyrolysis unit, to carbon-rich biochars among with other useful products. These chars are known to be beneficial as they can be used for water treatment applications; certain studies also reveal improvements in the biochar quality especially on the surface area and pore volume by imparting thermal and chemical activation methods, which eventually improves the uptake of pollutants during the removal of inorganic and organic contaminants in water. Research based on single waste valorisation into biochar applications for water treatment has been extended and applied to the pyrolysis of two or more feedstocks, termed co-pyrolysis, and its implementation for water treatment. The co-pyrolysis research mainly covers activation, applications, predictive calculations, and modelling studies, including isotherm, kinetic, and thermodynamic adsorption analyses. This paper focuses on the copyrolysis biochar production studies for activated adsorbents, adsorption mechanisms, pollutant removal capacities, regeneration, and real water treatment studies to understand the implementation of these co-pyrolyzed chars in water treatment applications. Finally, some prospects to identify the future progress and opportunities in this area of research are also described. This review provides a way to manage solid waste in a sustainable manner, while developing materials that can be utilized for water treatment, providing a double target approach to pollution management.

Designed Core-Shell Fe3O4@Polydopamine for Effectively Removing Uranium(VI) from Aqueous Solution

Adsorbents with the combination of magnetic separation and removal performance are expected for reducing the adverse impact of nuclear pollution. In this study, the core-shell Fe₃O₄@polydopamine (Fe₃O₄@PDA) was successfully synthesized and used for removal of uranium (U(VI)) ion from aqueous solution. The abundant N-containing groups derived from PDA exist as the chelate sites for U(VI) and contribute greatly for U(VI) removal. Experimental results show that Fe₃O₄@PDA (56.39 mg g^-1) exhibits greater sorption capacity for U(VI) removal compared with the pure Fe₃O₄ (9.17 mg g^-1). The sorption isotherm can be well fitted with Freundlich model and the sorption process is endothermic and spontaneous. The removal of U(VI) can be explained by the complexation of U(VI) with -NH-, -NH₂ and C-O in the surface of Fe₃O₄@PDA by X-ray photoelectron spectroscopy (XPS) analysis.

Long-term effects of sewage sludge-derived biochar on the accumulation and availability of trace elements in a tropical soil

Thermal treatment by pyrolysis has been proposed as a sustainable alternative to enable the agricultural use of sewage sludge. The solid product obtained via pyrolysis of sewage sludge is called sewage sludge biochar and presents several advantages for its use as a fertilizer or soil conditioner. However, there are concerns about the accumulation and dynamics of trace elements in soil amended with sewage sludge biochar over the years. This study examined the effect of sewage sludge biochar, under field conditions for 5 yr, on the accumulation and availability of trace elements in a tropical soil. For this, 15 t ha^-1 of sewage sludge biochar produced at 300 and 500 °C were applied in the first two growing seasons. Application was interrupted from the third to the fifth seasons to assess the residual effect of sewage sludge biochar in the soil. The total and available trace element concentrations were determined. The total contents of trace elements showed the following variation in the soil over the 5 yr (mg kg^-1): Cd (16.8-20.0), Co (19.5-21.5), Cr (98.2-125.7), Cu (8.1-17.1), Mn (62.9-85.7), Ni (20.3-35.0), Pb (27.0-52.4), and Zn (20.3-35.8). There was no change in the availability of Cd, Cr, Ni, and Pb over the years. Additionally, a residual effect of the sewage sludge biochar was the increase in availability of trace elements that are considered essential (Cu, Mn, and Zn) and beneficial elements (Co) for plants. Therefore, in relation to contamination by trace elements, the pyrolysis of sewage sludge of domestic origin proved to be an adequate strategy to enable the safe use of this residue in tropical agriculture.

High adsorption capacity of Mg-Al-modified biochar for phosphate and its potential for phosphate interception in soil

In this study, Mg and/or Al modified biochars (MABC¹, MBC², ABC³) prepared by co-precipitation were to explore their phosphate adsorption capacity from aqueous solution and the potential for soil phosphate interception. The results revealed that MABC composites contained more functional groups than MBC and showed a higher surface area than ABC. The surface of MABC contained dispersed MgAl₂O₄, Mg(OH)₂, AlOOH and Al₂O₃ crystals that were associated with its enhanced maximum phosphate adsorption capacity (153.40 mg g^-1). According to Langmuir model, the maximum adsorption capacity of MABC was 15.91, 1.85, and 93.54 times the capacity of MBC, ABC, and raw biochar (BC⁴), respectively. The addition of MABC in red soil could significantly slow down the release of soil phosphorus, and MABC also had a stronger phosphate interception capacity (59.89%) than other BCs. In summary, MABC exhibits superior phosphate adsorption and interception capacity, making it ideal for treatment and prevention of phosphorus-polluted water.

Effects of biochar properties on the bioremediation of the petroleum-contaminated soil from a shale-gas field

The characteristics of biochar carriers prepared from different biomass (corncob, straw, and sawdust) were investigated, and the bioremediation performance of the biochar through microbial immobilization was analyzed. Corncob biochar had the highest specific surface area (157.11-312.30 m² g^-1) among the different biomass, and the specific surface area and total pore volume reached the maximum at 500 °C. The pore size was primarily micropore, which aided to the fixation of microorganisms and the adsorption of petroleum pollutants. With increased pyrolysis temperature, the polar functional groups in biochar decreased, and the aromatic functional groups gradually increased, thereby benefiting the adsorption of hydrophobic organic compounds. Corncob biochar had the highest zeta potential, i.e., from - 30.95 to - 6.43 mV, conducive to the electrostatic adsorption between carrier and microorganism. The highest oil-removal and microbial-immobilization rates of biochar CC500 (with corncob pyrolyzed at 500 °C) were about 70.7% and 71.2%, respectively. A strong recovery of microbial growth activity was also observed; recovery was 83.38% compared with free bacteria, and the fixed microorganisms reached logarithmic-growth period at 8-18 h.

Preparation of biochar by mango peel and its adsorption characteristics of Cd(ii) in solution

Biochars were prepared by pyrolyzing mango peel waste at 300, 400, 500, 600 and 700 °C. Various characterizations were carried out to explore the effect of pyrolysis temperature on the biochars. The data indicated that the physical and chemical properties of biochar such as pH, element ratio, specific surface area and functional groups changed with the increase of pyrolysis temperature. The yield and contents of hydrogen, nitrogen and oxygen decreased, while contents of the ash and carbon, pH and specific surface area of the biochars increased. In addition, the molar ratios of H/C, O/C and (O + N)/C decreased. In this study, batch adsorption experiments for Cd(ii) adsorption were performed with initial Cd(ii) concentrations of 10-300 mg L-1, contact times of 0-2880 min, various pH (2-8) and biochar dose (1-20 g L-1). Langmuir isotherm and pseudo-second-order kinetics models were better fits than other models, suggesting the dominant adsorption of mango peel biochars is via monolayer adsorption. Biochar derived at 500 °C was found to have the highest adsorption capacity of 13.28 mg g-1 among all biochars and the adsorption efficiency was still 67.7% of the initial adsorption capacity after desorption for 4 times. Based on adsorption kinetics and isotherm analysis in combination with EDS, FTIR and XRD analysis, it was concluded that cation exchange, complexation with surface functional groups and precipitation with minerals were the dominant mechanisms responsible for Cd adsorption by mango peel biochar. The study suggested that mango peel can be recycled to biochars and can be used as a low-cost adsorbent for Cd(ii) removal from wastewater.