Arthroscopic knotless-anchor rotator cuff repair: a clinical and radiological evaluation

Preoperative Increases in T2-Weighted Fat-Suppressed Magnetic Resonance Imaging Signal Intensities Associated With Advanced Tissue Degeneration and Mitochondrial Dysfunction in Rotator Cuff Tears

PURPOSE

To investigate the relationship between magnetic resonance imaging (MRI) signal intensities and mitochondrial function in patients undergoing arthroscopic rotator cuff repair, assessed through histological and genetic profiling of tendon tissue.

METHODS

This study, conducted between April 2022 and January 2023, included 20 patients undergoing rotator cuff repair for atraumatic/degenerative tears. Rotator cuff tendon edge samples were obtained during arthroscopic rotator cuff repair. Patients were classified based on signal intensity from preoperative T2-weighted fat suppressed MRI. Specifically, they were categorized as having either high or low signal intensity at the rotator cuff tendon edge, with the deltoid muscle serving as a reference. Comparative analyses specifically compared the histological features and genetic profiles of the tendon tissue at the rotator cuff tendon edge. Histological evaluation of harvested tendon specimens during arthroscopic rotator cuff repair employed the modified Bonar score. Real-time polymerase chain reaction was used to assess expression of various mitochondrial and apoptosis-related genes. The mitochondrial morphology of the rotator cuff torn site was examined using electron microscopy.

RESULTS

The higher signal intensity group showed significantly higher modified Bonar scores (P = .0068), decreased mitochondrial gene expression, increased TdT-mediated dUTP-biotin nick end labeling-positive cells (P = .032), lower superoxide dismutase activity (P = .011), reduced ATP5A (P = .031), and increased cleaved caspase-9 activity (P = .026) compared with the lower signal intensity group. Electron microscopy revealed fewer mitochondrial cristae in the higher signal intensity group.

CONCLUSIONS

Our results suggest correlations between high MRI signal intensities and the presence of degeneration, mitochondrial dysfunction, and increased apoptosis in rotator cuff tissues. This underscores the utility of MRI signal intensity as an indicator of tissue condition. CLINICAL RELEVANCE: This work builds on the premise that elevated preoperative MRI signal intensities may indicate higher rates of postoperative rotator cuff re-tears, substantiating these findings from a mitochondrial function perspective.

Clinical Outcomes and Repair Integrity After Double-Row Modified Mason-Allen Repair Technique With a Single Knot in Small to Medium Supraspinatus Tears

Background

Various arthroscopic rotator cuff repair techniques are being used for the treatment of rotator cuff tears with the development of surgical instruments. However, retears after repair are not completely avoidable, and efforts to reduce retears remain a challenge.

Purpose/Hypothesis

To introduce a new repair technique, the double-row modified Mason-Allen technique with a single knot, and to compare clinical outcomes and retear rates with the single-row modified Mason-Allen technique. It was hypothesized that this new technique would have a better clinical outcome and significantly lower retear rate than the single-row modified Mason-Allen technique.

Study Design

Cohort study; Level of evidence, 3.

Methods

A total of 110 patients with small- to medium-sized (<1.5 cm) full-thickness supraspinatus tears were enrolled into 2 groups, with 65 patients receiving the single-row modified Mason-Allen technique (group A) and 45 patients receiving the double-row modified Mason-Allen technique with a single knot (group B). The clinical and functional outcomes were evaluated using the American Shoulder and Elbow Surgeons (ASES) score; Disabilities of the Arm, Shoulder and Hand (DASH) score; and visual analog scale (VAS) for pain and satisfaction scores. All patients enrolled in this study were monitored for a minimum of 24 months. Magnetic resonance imaging was performed to analyze the integrity of tendons and retear at 6 months after surgery.

Results

No statistically significant differences between the 2 groups were found regarding the VAS for pain, ASES, and DASH scores. However, retear was found in 9 patients (13.8%) in group A and 1 patient (2.2%) in group B. The difference in the retear rate was statistically significant between the 2 groups (P = .037).

Conclusion

A significantly lower retear rate and comparable clinical outcomes were seen after the double-row modified Mason-Allen repair technique with a single knot when compared with the single-row modified Mason-Allen technique. Based on these findings, the double-row modified Mason-Allen repair technique with a single knot can be considered a surgical treatment option that can provide sufficient stability in small- to medium-sized supraspinatus tears.

Knotted or knotless double-row rotator cuff repair retear rates: a systematic review and meta-analysis

Background

Arthroscopic rotator cuff tear repair techniques used to rely on knot-tying double row techniques, but the advent of knotless transosseous equivalent procedures introduced a new variable to the debate. The purpose of this study is to determine which technique is associated with lower retear rates. For its' biomechanical advantages, the authors' hypothesis is that knotless techniques would have lower retear rates.

Methods

A systematic literature search was performed via PubMed and Google Scholar by two independent reviewers following PRISMA guidelines. Papers reporting retear rates after rotator cuff arthroscopic repair using knotted double-row or knotless transosseous equivalent techniques, evaluated by magnetic resonance imaging at least 6 months after surgery, were retrieved. Studies that do not differentiate between techniques and nonclinical reports were excluded. Eligible data was analyzed with Review Manager 5.4.1 using Mantel-Haenszel statistics with a fixed effect model.

Results

The authors' initial literature search retrieved 511 reports. After the selection process, 24 articles were available for this review, and 9 were eligible for meta-analysis. A comparison of 1888 subjects from noncomparative reports and a meta-analysis of reports in which both techniques were studied could not show a statistically significant difference in technique retear rates.

Discussion and conclusion

The current report revealed no significant difference in retear rates between the two arthroscopic repair techniques. Studies' quality was a limitation. Only two reported level 1 evidence. This review could not control variables such as cuff tear size, tissue quality, or individual comorbidities. Larger and longer follow-up studies could be helpful to further investigate this topic.

Association of obesity with high retears and complication rates, and low functional scores after rotator cuff repair: a systematic review and meta-analysis

BACKGROUND

Obesity influences the outcomes of orthopedic surgeries such as total knee arthroplasty and spinal surgery. However, the effect of obesity on the outcomes of rotator cuff repair is unknown. This systematic review and meta-analysis aimed to examine the effect of obesity on rotator cuff repair outcomes.

METHODS

PubMed, EMBASE, Web of Science, and Cochrane Library databases were searched to identify relevant studies published from their inception till July 2022. Two reviewers independently screened titles and abstracts using the specified criteria. Articles were included if they indicated the effect of obesity on rotator cuff repair and the related outcomes after surgery. Review Manager 5.4.1 software was used to perform statistical analysis.

RESULTS

Thirteen articles involving 85,497 patients were included. Obese patients had higher retear rates than nonobese patients (odds ratio [OR] 2.58, 95% confidence interval [CI] 1.23-5.41, P = .01), lower American Shoulder and Elbow Surgeons scores (mean difference [MD]: -3.59, 95% CI: -5.45 to [-1.74]; P = .0001), higher visual analog scale for pain (mean difference: 0.73, 95% CI: 0.29-1.17; P = .001), higher reoperation rates (OR 1.31, 95% CI 1.21-1.42, P < .00001), and higher rates of complications (OR 1.57, 95% CI 1.31-1.87, P = .000). Obesity did not affect the duration of surgery (MD: 6.03, 95% CI: -7.63 to 19.69; P = .39) or external rotation of the shoulder (MD: -1.79, 95% CI: -5.30 to 1.72; P = .32).

CONCLUSION

Obesity is a significant risk factor for retear and reoperation after rotator cuff repair. Furthermore, obesity increases the risk of postoperative complications and leads to lower postoperative American Shoulder and Elbow Surgeons scores and higher shoulder visual analog scale for pain.

Comparison of clinical outcomes of arthroscopic rotator cuff repair utilizing suture-bridge procedures with or without medial knots: a meta-analysis

PURPOSE

This investigation aimed to compare the medical efficacy of the knotted and knotless suture-bridge procedures in rotator cuff repair.

METHODS

The Pubmed, Embase, and Cochrane Library datasets were searched for all available publications comparing the medical results of arthroscopic rotator cuff repairs utilizing knotted or knotless suture-bridge procedures. Two researchers utilized Newcastle-Ottawa Scale and Cochrane risk-of-bias tool to evaluate the included studies. Employing Revman 5.3 software, meta-analysis was conducted following the PRISMA reporting guideline.

RESULTS

Eleven investigations with 1083 patients were considered suitable for the final meta-analysis. 522 individuals were assigned to the knotted group, whereas 561 were assigned to the knotless group. No statistical difference was found between the knotted and knotless groups, regarding VAS score (WMD, 0.17; 95% CI, - 0.10 to 0.44; P = 0.21); Constant score (WMD, -1.50; 95% CI, - 3.52 to 0.52; P = 0.14); American Shoulder and Elbow Surgeons Shoulder (WMD, -2.02; 95% CI, - 4.53 to 0.49; P = 0.11); University of California Los Angeles score (WMD, -0.13; 95% CI, - 0.89 to 0.63; P = 0.73); ROM of flexion (WMD, 1.57; 95% CI, - 2.11 to 5.60; P = 0.37), abduction (WMD, 1.08; 95% CI, - 4.53 to 6.70; P = 0.71) and external rotation (WMD, 1.90; 95% CI, - 1.36 to 5.16; P = 0.25); re-tear rate (OR, 0.74; 95% CI, 0.50 to 1.08; P = 0.12), and medical complications (OR, 0.90; 95% CI, 0.37 to 2.20; P = 0.82).

CONCLUSION

For arthroscopic rotator cuff repairs, there were no statistical differences in medical results among knotted and knotless suture-bridge procedures. Overall, both techniques showed excellent clinical outcomes and could be safely utilized to treat rotator cuff injuries.

Mechanics and differential healing outcomes of small and large defect injuries of the tendon-bone attachment in the rat rotator cuff

INTRODUCTION

Rotator cuff tear size affects clinical outcomes following rotator cuff repair and is correlated with the risk of recurrent tendon defects. This study aimed to understand if and how the initial defect size influences the structural and mechanical outcomes of the injured rotator cuff attachment in vivo.

METHODS

Full-thickness punch injuries of the infraspinatus tendon-bone attachment in Long Evans rats were created to compare differences in healing outcomes between small and large defects. Biomechanical properties, gross morphology, bone remodeling, and cell and tissue morphology were assessed at both 3- and 8-weeks of healing.

RESULTS

At the time of injury (no healing), large defects had decreased mechanical properties compared to small defects, and both defect sizes had decreased mechanical properties compared to intact attachments. However, the mechanical properties of the two defect groups were not significantly different from each other after 8-weeks of healing and significantly improved compared to no healing but failed to return to intact levels. Local bone volume at the defect site was higher in large compared to small defects on average and increased from 3- to 8-weeks. In contrast, bone quality decreased from 3- to 8-weeks of healing and these changes were not dependent on defect size. Qualitatively, large defects had increased collagen disorganization and neovascularization compared to small defects.

DISCUSSION

In this study, we showed that both large and small defects did not regenerate the mechanical and structural integrity of the intact rat rotator cuff attachment following healing in vivo after 8 weeks of healing.

"Functional outcomes and MRI-based tendon healing after (antero-) superior rotator cuff repair among patients under 50 years: retrospective analysis of traumatic versus non-traumatic rotator cuff tears"

BACKGROUND

Rotator cuff tears among patients under 50 years either result from an adequate trauma or are considered non-traumatic due to work-related or athletic overuse. The impact of these different mechanisms on postoperative functional outcomes and tendon healing has not yet been fully understood. Therefore, it was the purpose of this study to investigate the influence of etiology of (antero-)superior rotator cuff tears on postoperative outcomes and the healing rates after arthroscopic rotator cuff repair in a young patient population.

METHODS

Patients under 50 years who underwent arthroscopic rotator cuff repair between 2006-2017 for an anterosuperior rotator cuff tear with a minimum follow up of 24 months were included in this study. Revision surgeries or reconstructive concomitant procedures other than long head of the biceps tenodesis were excluded. Patients were divided into two groups according to the etiology of their rotator cuff tear (traumatic vs. non-traumatic). Demographic and outcome scores including the American Shoulder and Elbow Surgeons (ASES) score, the Constant Score (CS), bilateral strength measurements and postoperative tendon integrity evaluated on magnetic resonance imaging (MRI) were assessed and compared between both groups.

RESULTS

The mean follow up for this study was 55.6 months (24 - 158). Twenty-one patients (50.0%) had a traumatic RCT and 21 patients (50.0%) had a non-traumatic tear. Outcome scores did not differ significantly between groups. Strength measurements of the supraspinatus revealed significantly decreased force of the affected side as opposed to the contralateral side (p = 0.001), regardless of etiology. Retear rates were similar in both groups (37.5% and 33.3%, p = n.s.). Cuff integrity at follow-up was not predictive of superior scores or strength.

CONCLUSION

Surgical treatment of traumatic and non-traumatic RCT yields good clinical results in patients under the age of 50. The etiology of the rotator cuff tear did not significantly affect postoperative outcomes or healing rates. About one third of the patients suffered from a retear postoperatively, however retears were not predictive of inferior outcomes at midterm follow-up.

STUDY DESIGN

Level III.

TRIAL REGISTRATION

Retrospectively registered.

Can the Single Assessment Numeric Evaluation be used as a stand-alone subjective outcome instrument in patients undergoing rotator cuff repair?

BACKGROUND/HYPOTHESIS

There is no consensus to which patient-determined shoulder outcome scores should be considered when analyzing patient outcomes. Use of multiple patient-determined outcomes may be redundant and cause increased responder burden. The Single Assessment Numeric (SANE) has not been widely accepted as a stand-alone shoulder-specific outcome measure. The hypothesis was that SANE will correlate with and be comparable in responsiveness to other subjective outcome measures that have been used in a stand-alone fashion in patients undergoing rotator cuff repair (American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form [ASES], Western Ontario Rotator Cuff Index [WORC], and the Simple Shoulder Test [SST]). In addition, the SANE will be more relevant to each patient compared to the ASES, further supporting its use as a stand-alone shoulder-specific outcomes measure.

METHODS

A retrospective review of a database of patients undergoing rotator cuff repair was reviewed where the SANE was recorded with the ASES, WORC, and/or SST. Correlations were determined using the Pearson coefficient. Subgroup analysis was performed to determine if correlations differed in (1) preoperative and (2) postoperative outcome determinations. Responsiveness was determined by calculating the standardized response mean (SRM) and the effect size (ES) of all scores. Relevance and precision of the SANE and ASES were examined using 150 consecutive patients to determine the number of questions in each score that were not answered.

RESULTS

Correlation was excellent for the SANE and the ASES (n = 1838, r = 0.81, P < .0001), the WORC (n = 1793, r = 0.82, P < .0001), and the SST (n = 1836, r = 0.76, P < .0001). Correlation of preoperative scores was moderate and postoperative scores were excellent when comparing the SANE with all 3 scores. All scores were highly responsive, with the SRM of the SANE = 2.1, ASES = 2.2, WORC = 2.4, and the SST = 1.8. The ES of the SANE = 2.4, ASES = 2.7, WORC = 3.0, and the SST = 2.1. One hundred percent of the SANE scores were answered completely compared with 57% (P < .0001) of the ASES, with significant variability found in the answers to the "work" and "score" questions.

CONCLUSION

In patients undergoing rotator cuff repair, the SANE highly correlated and has equivalent responsiveness with the WORC, ASES, and SST, which have been used as stand-alone shoulder-specific outcomes measures. The SANE may provide the same information as the WORC, ASES, and SST regarding outcome with significant reduction in responder burden. This study supports that the SANE can be used as a subjective, stand-alone instrument for patients undergoing rotator cuff repair.

Double-Row Rotator Cuff Repair Technique With Dermal Allograft Augmentation

Rotator cuff tears are common and debilitating injuries in the orthopaedic patient population. Although arthroscopic repair of the rotator cuff generally leads to satisfactory outcomes, some tears would benefit from augmentation with allograft to supplement the native tissue. This biological augmentation has been shown to decrease retear rates and can be beneficial in certain cases based on the size of the tear, amount of retraction, age of the patient, and chronicity. In this technical note, we describe a simple and effective technique for arthroscopic rotator cuff repair with biological augmentation.

Does the critical shoulder angle influence retear and functional outcome after arthroscopic rotator cuff repair? A systematic review and meta-analysis

PURPOSE

This systematic review and meta-analysis aimed to evaluate the correlation between increased critical shoulder angle (CSA) and higher retear rates and functional outcomes after arthroscopic rotator cuff repair (ARCR).

METHODS

PubMed, Embase, Web of Science, and Cochrane Library databases published before January 2022 were comprehensively searched. Two reviewers independently reviewed the titles and abstracts using the specified criteria. Studies were included if the authors clearly described the correlation between the CSA and rotator cuff repair. Data on patient characteristics, mean CSA, retear rate, and the functional score was pooled from the selected articles. A meta-analysis was performed using Review Manager (RevMan) 5.4.1 software, 2020 (Cochrane Collaboration, Copenhagen, Denmark).

RESULTS

Eleven articles involving 1449 patients from 7 countries were included. The ages of the patients ranged from 45 to 75 years. The follow-up period ranged from 6 to 96 months. The mean CSA was greater in the retear group than in the non-retear group after ARCR (mean difference 2.73°; 95% confidence interval [CI] 0.69-4.77) (p = 0.009). Three studies evaluated the association between increased CSA and the postoperative retear rate. All three studies showed a higher postoperative retear rate in patients with an increased CSA (odds ratio 5.35; 95% CI 2.02-14.15; p = 0.0007). No association was found between CSA and Constant-Murley (Constant), the University of California at Los Angeles (UCLA), or Visual Analog Scale (VAS) scores during the follow-up period of 24-96 months (p > 0.05).

CONCLUSIONS

This systematic review and meta-analysis showed that CSA correlates highly with rotator cuff retear after ARCR. In addition, the postoperative retear rate of the rotator cuff increased with increased CSA. CSA appeared to not affect worse functional outcomes in patients after ARCR.

Clinical perspectives for repairing rotator cuff injuries with multi-tissue regenerative approaches

Background

In the musculoskeletal system, bone, tendon, and muscle form highly integrated multi-tissue units such as the rotator cuff complex, which facilitates functional and dynamic movement of the shoulder joint. Understanding the intricate interplay among these tissues within clinical, biological, and engineering contexts is vital for addressing challenging issues in treatment of musculoskeletal disorders and injuries.

Methods

A wide-ranging literature search was performed, and findings related to the socioeconomic impact of rotator cuff tears, the structure-function relationship of rotator cuff bone-tendon-muscle units, pathophysiology of injury, current clinical treatments, recent state-of-the-art advances (stem cells, growth factors, and exosomes) as well as their regulatory approval, and future strategies aimed at engineering bone-tendon-muscle musculoskeletal units are outlined.

Results

Rotator cuff injuries are a significant socioeconomic burden on numerous healthcare systems that may be addressed by treating the rotator cuff as a single complex, given its highly integrated structure-function relationship as well as degenerative pathophysiology and limited healing in bone-tendon-muscle musculoskeletal tissues. Current clinical practices for treating rotator cuff injuries, including the use of commercially available devices and evolving trends in surgical management have benefited patients while advances in application of stem/progenitor cells, growth factors, and exosomes hold clinical potential. However, such efforts do not emphasize targeted regeneration of bone-tendon-muscle units. Strategies aimed at regenerating bone-tendon-muscle units are thus expected to address challenging issues in rotator cuff repair.

Conclusions

The rotator cuff is a highly integrated complex of bone-tendon-muscle units that when injured, has severe consequences for patients and healthcare systems. State-of-the-art clinical treatment as well as recent advances have resulted in improved patient outcome and may be further enhanced by engineering bone-tendon-muscle multi-tissue grafts as a potential strategy for rotator cuff injuries.

Translational Potential of this Article

This review aims to bridge clinical, tissue engineering, and biological aspects of rotator cuff repair and propose a novel therapeutic strategy by targeted regeneration of multi-tissue units. The presentation of these wide-ranging and multi-disciplinary concepts are broadly applicable to regenerative medicine applications for musculoskeletal and non-musculoskeletal tissues.

Knotted and knotless double row transosseous equivalent repair techniques for arthroscopic rotator cuff repair demonstrate comparable post-operative outcomes

PURPOSE

To compare failure rates and outcomes after transosseous equivalent (TOE) double row (DR) knotted suture bridge versus knotless suture tape bridge repair techniques for rotator cuff tears.

METHODS

A consecutive series of 272 shoulders in 256 patients who underwent arthroscopic, double row, TOE repair for full-thickness tears of the supraspinatus tendon were reviewed. Eighty-four shoulders were repaired using knotted suture bridge (KSB) technique, and 188 shoulders were repaired using all knotless suture tape bridge (KTB) technique. Revision procedures and concomitant subscapularis tendon repairs were excluded from analysis. The minimum follow-up was 12 months. Primary outcome was failure of surgical repair, defined as either confirmed retear on MRI and/or need for revision surgery. Secondary clinical outcome measures were assessed including range of motion, strength, visual analog scale (VAS), operative time, subjective shoulder value (SSV), Patient-Reported Outcomes Measurement Information System (PROMIS) mental and physical health, American Shoulder and Elbow Surgeons Shoulder Score (ASES), Brophy shoulder activity scores, and need for manipulation under anesthesia (MUA).

RESULTS

A total of 127 shoulders (38 KSB and 89 KTB) met inclusion criteria for the study. No significant difference in demographic variables were present between the groups at baseline. Supraspinatus tear size and average follow-up time did not differ significantly between groups. Failure rates were similar between the KSB and KTB repairs (13.1 vs 7.9%, n.s.). There was no significant difference in functional outcomes including strength, range of motion in forward flexion and external rotation, as well as patient reported outcomes including VAS, SSV, PROMIS, ASES, and Brophy scores between the groups. There was also no difference in post-operative stiffness requiring MUA.

CONCLUSION

Both KSB and KTB repair techniques demonstrate low retear rates with excellent functional outcomes when compared to pre-operative examination. Both KSB and KTB techniques are viable options for achieving a successful rotator cuff repair.

LEVEL OF EVIDENCE

Level III.

Knotless Tendoscopic Peroneal Retinaculum Repair Technique for Recurrent Peroneal Tendon Dislocation

Peroneal tendon dislocation (PTD) is sometimes diagnosed as a sports-related injury, of which many cases lead to recurrent PTD (RPTD). Superior retinaculum repair is the major operative treatment of RPTD. The technique described herein comprises 8 steps: (1) Standard tendoscopic examination, (2) debridement of the pseudo-pouch base, (3) first anchor insertion, (4) suture relay, (5) second anchor insertion and suture relay, (6) third anchor insertion and suture relay, (7) suture tightening, and (8) suture bridge. Although this tendoscopic peroneal retinaculum repair technique is complicated, expensive, and requires a longer operation time, it incorporates a double-row suture bridge. Therefore, it has a wider contact surface between the superior retinaculum repair and fibula bone and tighter fixation than does a single-row technique. Moreover, our technique is knotless and thereby avoids knot-related complications. Tendoscopy has additional advantages in terms of less postoperative pain, fewer complications, and better cosmesis. In conclusion, this knotless tendoscopic peroneal retinaculum repair technique for RPTD is a patient-friendly surgery compared with previous procedures.

Graft Augmentation of Repairable Rotator Cuff Tears: An Algorithmic Approach Based on Healing Rates

We provide our algorithm for tissue augmentation of rotator cuff repairs based on the current available evidence regarding rotator cuff healing. A variety of factors are associated with healing following rotator cuff repair. Increasing tear size and retraction as well as severe fatty degeneration have been associated with worsening rates of tendon healing. Given the correlation between tendon healing and postoperative outcomes, it is important to identify patients at high risk for failure and to modify their treatment accordingly to minimize the risk of early biomechanical failure and maximize the potential for structural healing. One approach that may be used to improve healing is tissue augmentation. Tissue augmentation is the use of tissue patches and scaffolds to provide rotator cuff reinforcement. Surgical management for rotator cuff tears (RCTs) continues to be a challenging task in orthopaedic surgery today. Appropriate treatment measures require an in depth understanding and consideration of the patient's prognostic factors such as age, fatty infiltration of the rotator cuff muscles, bone mineral density, rotator cuff retraction, anteroposterior tear size, work activity, and degenerative changes of the joint. Using these factors within the Rotator Cuff Healing Index, we can determine a patient's surgical treatment that will yield the maximum healing rate. For nonarthritic RCTs, joint-preserving strategies should be first-line treatment options. For young, active patients with a reparable RCT and minimal fatty infiltration, a complete repair can be effective. For young patients with irreparable RCTs, superior capsular reconstructions, and tendon transfers are viable options. For elderly patients with low work activity, an irreparable RCT and significant fatty infiltration, a partial repair with or without graft augmentation can be attempted if minimal to no arthritic changes are seen. LEVEL OF EVIDENCE: Level V, expert opinion.

H-loop Knotless Double-Row Repair Versus Knotted Suture Bridge for Rotator Cuff Tears: A Biomechanical and Histological Study in an Animal Model

BACKGROUND

Knotted suture bridge repair (KSBR) has been widely proven to be an effective method for rotator cuff repairs. However, the occurrence of type 2 failure after suture bridge repair remains a frequent problem because of the stress concentration and disturbance of tendon perfusion in the medial row. The authors have developed the H-loop knotless double-row repair (HLDR) to counteract these problems.

PURPOSE

To compare the biomechanical and histological outcomes of HLDR and KSBR for rotator cuff tear in the rabbit model.

STUDY DESIGN

Controlled laboratory study.

METHODS

Acute bilateral supraspinatus tears were created on the shoulders of 46 New Zealand White rabbits. HLDR and KSBR were randomly performed on the left side or right side. Thirteen animals each were sacrificed at 2, 4, and 8 weeks after surgery (n = 39), with 6 rabbits used for histological evaluation and the other 7 rabbits for biomechanical testing. The remaining 7 animals from the original 46 were only used for initial biomechanical evaluation at week 0.

RESULTS

Macroscopically, all repaired tendons were connected to their footprint on the greater tuberosity without postoperative complications at 8 weeks after surgery. The HLDR group had significantly better histological bone-to-tendon integration compared with the KSBR group in terms of fibrocartilage regeneration, collagen composition, and fiber organization. The biomechanical outcomes in the HLDR group were demonstrated to be better than those of the KSBR group at time 0 and 8 weeks after surgery.

CONCLUSION

Both repair techniques were effective for rotator cuff tears in a rabbit rotator cuff tear model; however, HLDR demonstrated more advantages in improving biomechanical properties and histological tendon-to-bone healing compared with KSBR.

CLINICAL RELEVANCE

This animal study suggested that HLDR might be an alternative choice for rotator cuff tears in humans to increase tendon-to-bone healing and reduce the rate of failure to heal.

Knotted Versus Knotless Medial-Row Transosseous-Equivalent Double-Row Rotator Cuff Repairs Have Similar Clinical and Functional Outcomes

Purpose

To retrospectively investigate the clinical and functional outcomes of patients who underwent knotted medial-row rotator cuff repair (KT-RCR) compared with patients who underwent knotless medial-row rotator cuff repair (KL-RCR).

Methods

A retrospective chart review of patients who underwent double-row transosseous-equivalent rotator cuff repair in 2016 was performed at a single institution with 2-year follow-up. Information regarding demographic characteristics, preoperative tear size (magnetic resonance imaging), surgical variables (including method of suture stabilization), preoperative and postoperative American Shoulder and Elbow Surgeons (ASES) scores, and all complications (e.g., cuff failure, adhesive capsulitis, and persistent pain) was compiled.

Results

A total of 189 patients met the inclusion criteria: 72 in the KL-RCR group and 117 in the KT-RCR group. No significant difference in preoperative ASES scores was found between the KL-RCR and KT-RCR groups (48.3 vs 45.4, P = .327). Postoperative ASES scores did not differ between the groups (82.4 for KL-RCR vs 78.8 for KT-RCR, P = .579). We found no significant difference in cuff failure rates after 2 years, determined by magnetic resonance imaging (5.6% for KL-RCR vs 6.1% for KT-RCR, P > .999), or complication rates (11.1% for KL-RCR vs 8.6% for KT-RCR, P = .743).

Conclusions

The knotted approach and knotless approach to double-row rotator cuff repair showed similar outcome scores, cuff failure rates, and complication rates at minimum 2-year follow-up.

Level of Evidence

Level III, retrospective therapeutic comparative trial.

Are Knotted or Knotless Techniques Better for Reconstruction of Full-Thickness Tears of the Superior Portion of the Subscapularis Tendon? A Study in Cadavers

BACKGROUND

Knotted and knotless single-anchor reconstruction techniques are frequently performed to reconstruct full-thickness tears of the upper portion of subscapularis tendon. However, it is unclear whether one technique is superior to the other.

QUESTIONS/PURPOSES

(1) When comparing knotless and knotted single-anchor reconstruction techniques in full-thickness tears of the upper subscapularis tendon, is there a difference in stiffness under cyclic load? (2) Are there differences in cyclic gapping between knotless and knotted reconstructions? (3) Are there differences in the maximal stiffness, yield load, and ultimate load to failure? (4) What are the modes of failure of knotless and knotted reconstruction techniques?

METHODS

Eight matched pairs of human cadaveric shoulders were dissected, and a full-thickness tear of the subscapularis tendon (Grade 3 according to the Fox and Romeo classification) was created. The cadavers all were male specimens, with a median (range) age of 69 years (61 to 75). Before biomechanical evaluation, the specimens were randomized into two equal reconstruction groups: knotless single anchor and knotted single anchor. All surgical procedures were performed by a single orthopaedic surgeon who subspecializes in sports orthopedics and shoulder surgery. With a customized set up that was integrated in a dynamic material testing machine, the humeri were consecutively loaded from 10 N to 60 N, from 10 N to 100 N, and from 10 N to 180 N for 50 cycles. Furthermore, the gapping behavior of the tear was analyzed using a video tracking system. Finally, the stiffness, gapping, maximal stiffness, yield loads, and maximum failure loads of both reconstruction groups were statistically analyzed. Failure was defined as retearing of the reconstructed gap threshold due to rupture of the tendon and/or failure of the knots or anchors. After biomechanical testing, bone quality was measured at the footprint of the subscapularis using microCT in all specimens. Bone quality was equal between both groups. To detect a minimum 0.15-mm difference in gap formation between the two repair techniques (with a 5% level of significance; α = 0.05), eight matched pairs (n = 16 in total) were calculated as necessary to achieve a power of at least 90%.

RESULTS

The first study question can be answered as follows: for stiffness under cyclic load, there were no differences with the numbers available between the knotted and knotless groups at load stages of 10 N to 60 N (32.7 ± 3.5 N/mm versus 34.2 ± 5.6 N/mm, mean difference 1.5 N/mm [95% CI -6.43 to 3.33]; p = 0.55), 10 N to 100 N (45.0 ± 4.8 N/mm versus 45.2 ± 6.0 N/mm, mean difference 0.2 N/mm [95% CI -5.74 to 6.04]; p = 0.95), and 10 N to 180 N (58.2 ± 10.6 N/mm versus 55.2 ± 4.7 N/mm, mean difference 3 N/mm [95% CI -5.84 to 11.79]; p = 0.48). In relation to the second research question, the following results emerged: For cyclic gapping, there were no differences between the knotted and knotless groups at any load levels. The present study was able to show the following with regard to the third research question: Between knotted and knotless repairs, there were no differences in maximal load stiffness (45.3 ± 8.6 N/mm versus 43.5 ± 10.2 N/mm, mean difference 1.8 [95% CI -11.78 to 8.23]; p = 0.71), yield load (425.1 ± 251.4 N versus 379.0 ± 169.4 N, mean difference 46.1 [95% CI -276.02 to 183.72]; p = 0.67), and failure load (521.1 ± 266.2 N versus 475.8 ± 183.3 N, mean difference 45.3 [95% CI -290.42 to 199.79]; p = 0.69). Regarding the fourth question concerning the failure modes, in the knotted repairs, the anchor tore from the bone in 2 of 8, the suture tore from the tendon in 6 of 8, and no suture slipped from the eyelet; in the knotless repairs, the anchor tore from the bone in 2 of 8, the suture tore from the tendon in 3 of 8, and the threads slipped from the eyelet in 3 of 8.

CONCLUSION

With the numbers available, we found no differences between single-anchor knotless and knotted reconstruction techniques used to repair full-thickness tears of the upper portion of subscapularis tendon.

CLINICAL RELEVANCE

The reconstruction techniques we analyzed showed no differences in terms of their primary stability and biomechanical properties at the time of initial repair and with the numbers available. In view of these experimental results, it would be useful to conduct a clinical study in the future to verify the translationality of the experimental data of the present study.

Use of Suture Tapes Versus Conventional Sutures for Arthroscopic Rotator Cuff Repairs: A Systematic Review and Meta-analysis

BACKGROUND

Various suture materials are available for arthroscopic rotator cuff repair. More recently, suture tapes have become popular as they are perceived to be easier to use with less soft tissue irritation. However, little is known about their biomechanical and clinical properties compared with conventional sutures in rotator cuff repairs.

PURPOSE

To perform a systematic review and meta-analysis on whether suture tapes are biomechanically superior to conventional sutures in arthroscopic rotator cuff repairs and whether this translates to superior functional outcomes and a lower incidence of retears.

STUDY DESIGN

Meta-analysis.

METHODS

The Cochrane Controlled Register of Trials, PubMed, Medline, and Embase were used to perform a systematic review and meta-analysis using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) criteria with the following search terms: (rotator cuff repair OR arthroscopic rotator cuff repair) AND ("tape" OR "wire" OR "cord" OR "suture"). Data pertaining to certain biomechanical properties (contact area, contact pressure, gap formation, load to failure, and stiffness), retears, and patient-reported outcome measures (PROMs) were extracted. The pooled outcome data were analyzed by random- and fixed-effects models.

RESULTS

After abstract and full-text screening, 7 biomechanical and 6 clinical studies were included. All biomechanical studies were on animals, with 91 suture tapes and 91 conventional sutures compared. Suture tapes had higher contact pressure (mean difference [MD], 0.04 MPa; 95% CI, 0.01-0.08; P = .02), higher load to failure (MD, 52.62 N; 95% CI, 27.34-77.90; P < .0001), greater stiffness (MD, 4.47 N/mm; 95% CI, 0.57-8.38; P = .02), and smaller gap formation (MD, -0.30 mm; 95% CI, -0.45 to -0.15; P < .0001) compared with conventional sutures. From the clinical analysis of the 681 rotator cuff repairs treated with a suture tape (n = 380) or conventional suture (n = 301), there were no differences in retear rates between the groups (16% vs 20% suture tape and wire, respectively; P = .26) at a mean of 11.2 months. Qualitatively, there were no differences in PROMs between the groups at a mean of 36.8 months.

CONCLUSION

Although biomechanically superior, suture tapes showed similar retear rates and postoperative function to conventional sutures. However, higher-quality clinical studies are required to investigate whether there are no true differences.

Risk factors affecting rotator cuff retear after arthroscopic repair: a meta-analysis and systematic review

BACKGROUND

Retear after arthroscopic rotator cuff repair (ARCR) consistently challenges medical staff and patients, and the incidence of retear after surgery is 10%-94%. The purpose of this study was to identify the risk factors that cause retear after ARCR and provide theoretical guidance for clinical intervention to reduce the occurrence of postoperative rotator cuff retear.

METHODS

The protocol for this meta-analysis was registered with PROSPERO (CRD42021225088). PubMed, Web of Science, and Embase were searched for observational studies on risk factors for rotator cuff retear after arthroscopic repair. Meta-analytical methods were used to determine the odds ratio or weighted mean difference of potential risk factors related to postoperative rotator cuff retear. Stata 15.1 was used to quantitatively evaluate the publication bias of the statistical results.

RESULTS

Fourteen studies from 6 countries with a total of 5693 patients were included. The meta-analysis revealed that the risk factors for retear after rotator cuff repair were age, body mass index, diabetes, subscapularis and infraspinatus fatty infiltration, symptom duration, bone mineral density, tear length, tear width, tear size area, amount of retraction, critical shoulder angle, acromiohumeral interval, distance from the musculotendinous junction to the glenoid, operative duration, biceps procedure, and postoperative University of California Los Angeles shoulder score.

CONCLUSION

These findings can help clinical medical staff identify patients who are prone to retear early after arthroscopic repair and develop targeted prevention and treatment strategies for modifiable risk factors, which are of great significance for reducing the occurrence of rotator cuff retear after ARCR.

The Application of H-Loop in Arthroscopic Knotless Double-Row Rotator Cuff Repairs

Objective

To determine the functional outcomes after a novel method of H‐loop knotless double‐row technique in patients with rotator cuff tears.

Method

From June 2020 to September 2020, a total of six patients (five women, one man) with arthroscopic rotator cuff repair using the H‐loop knotless double‐row technique were enrolled in our study. The average age is 54 years (range: 50–61 years). The preoperative and final follow‐up clinical outcome were evaluated using the American Shoulder and Elbow Surgeons (ASES) score, visual analog scale (VAS), University of California Los Angeles (UCLA) score, and Constant–Murley score. The active shoulder range of motion (ROM) was also collected preoperatively and postoperatively at the final follow‐up (forward flexion and abduction). Accordingly, intraoperative and postoperative complications were observed as well.

Result

There were six patients that underwent arthroscopic rotator cuff repair using the H‐loop knotless double‐row technique. The average follow‐up period was 7.52 ± 0.70 months. The VAS, UCLA, ASES, and Constant–Murley scores improved from 5 ± 2.45, 15.67 ± 3.44, 47.67 ± 17.41 and 49.17 ± 8.98 preoperatively, to 0.83 ± 0.75, 36.27 ± 3.83, 91.67 ± 10.76 and 85.83 ± 4.31 at the final follow‐up, with statistical significances of P = 0.009, P < 0.001, P = 0.006, and P = 0.001, respectively. Meanwhile, the active shoulder ROM (forward flexion and abduction) improved from 135.00 ± 46.80 and 125 ± 56.48 preoperatively, to 173.67 ± 4.13 and 172 ± 3.27 at final follow‐up, respectively (P = 0.082, P = 0.088). During the follow‐up, there were no postoperative complications such as wound‐site infection, nerve or vessel damage, subcutaneous hematoma, and suture anchor problems.

Conclusion

With the benefit of reducing the possibility of strangulation and blood supply affection for the rotator cuff, The H‐loop knotless double row technique may be an alternative method to significantly improve subjective functional outcomes and increase the healing rate of medium‐sized rotator cuff tears with degeneration issues and poor tissue quality.

Triple-Row Technique Confers a Lower Retear Rate Than Standard Suture Bridge Technique in Arthroscopic Rotator Cuff Repairs

PURPOSE

To compare the structural and clinical results between the knotless suture bridge (SB) and triple-row (TR) techniques.

METHODS

This study is a retrospective study and included 212 shoulders with repairable rotator cuff tears treated with the SB technique and 206 shoulders treated with the TR technique. In the TR technique, medial and lateral anchors were placed as they would be for the SB technique, with a middle row anchor added on the edge of footprint to reduce the torn tendons. All patients underwent primary arthroscopic rotator cuff repair and had magnetic resonance imaging 6 months postoperatively to evaluate for retear. Sugaya's classification was used to classify the retear pattern. The function of all patients preoperatively and 2 years postoperatively were assessed by the American Shoulder and Elbow Surgeons shoulder index and the University of California at Los Angeles rating scale.

RESULTS

According to Sugaya's classification, 24 (11.3%), 6 (2.8%), and 20 (9.4%) in SB-treated shoulders and 16 (7.8%), 12 (5.8%), and 8 (3.9%) in TR-treated shoulders, respectively had types 3, 4, and 5. There was a statistically significant greater type 5 retear in SB-treated shoulders (P = .038) than in TR-treated shoulders. The average clinical outcome scores at the final follow-up improved significantly relative to those before the surgeries in both groups. There were no statistical differences in the clinical outcome scores at the final follow-up between SB and TR groups.

CONCLUSIONS

The use of the TR technique in arthroscopic rotator cuff repair resulted in a lower large-size retear rate when compared with the use of the SB technique. No clinical differences were noted in the outcomes between the 2 groups.

LEVEL OF EVIDENCE

Level III, therapeutic, retrospective cohort study.

Stump classification was correlated with retear in the suture-bridge and double-row repair techniques for arthroscopic rotator cuff repair

PURPOSE

The Stump classification is significantly correlated with a retear after arthroscopic rotator cuff repair. However, no study has evaluated whether or not the stump classification is correlated with retear in the suture-bridge or double-row repair techniques. The aim of this study was to evaluate the relationship between a retear and the stump classification in the suture-bridge and double-row repair techniques.

METHODS

Among 389 patients who underwent arthroscopic repairs of full-thickness rotator cuff tears using suture-bridge or double-row repair techniques, 326 patients (median age 67.0 years; range 25-85) were included. There were 51 small, 172 medium, 83 large, and 20 massive tears. Two hundred forty patients were treated with the suture-bridge technique, and 86 patients were treated with the double-row technique. The following variables were analyzed: age, sex, the Cofield classification, anteroposterior and mediolateral tear size on preoperative MRI, global fatty degeneration index, and the stump classification. Cuff integrity was evaluated on magnetic resonance imaging at 6 months after surgery. The patients were divided into the intact and retear groups and the relationship between the variables and retear was evaluated by multivariate logistic regression analysis.

RESULTS

The overall retear rate was 10.1%. In the multivariate logistic regression analysis, the independent predictors of a retear were the stump classification type 3 (Odds ratio: 4.71, p = 0.0246), global fatty degeneration index (Odds ratio: 3.87, p = 0.0030), and anteroposterior tear size (Odds ratio: 1.07, p = 0.0077) in the suture bridge technique. In the double-row technique, the independent predictors of retear were stump classification type 3 (Odds ratio: 7.82, p = 0.0348), and age (Odds ratio: 1.22, p = 0.0163).

CONCLUSION

The stump classification was significantly correlated with retear in the suture-bridge and double-row repair technique. Stump classification type 3 was indicated to be an important risk factor for predicting retear.

LEVEL OF EVIDENCE

III.

Arthroscopic knotless repair: an effective technique for small-sized supraspinatus tendon tears

PURPOSE

The purpose was to evaluate the clinical and radiological results of knotless repair with flat-braided suture in full small-sized supraspinatus tendon tears (< 1 cm).

METHODS

A consecutive series of 54 patients with isolated small supraspinatus tendon tear (< 1 cm and Goutallier index < 2) was evaluated in the study. Patients underwent a knotless arthroscopic repair using flat-braided suture (2 mm wide). Minimal follow-up required was 5 years. Changes in Murley-Constant score, ASES score, strength, and pain relief were assessed. The Sugaya score was used to confirm the tendon repair on MRI. Data were analyzed in two subgroups: technique with additional U point for dog ear deformity (group 1) and technique without additional U point (group 2). The immobilization period was 3 weeks long. Passive mobilization was immediate.

RESULTS

Fifty-four patients were included. Mean age was 57 ± 4 years. The average follow-up was 68 ± 10 months. Average preoperative score of Constant was 51.2 ± 8.5 and 83.1 ± 14.6 at the end of the follow-up (p < 0.001). Mean VAS went from 5.8 ± 1.8 to 1.9 ± 2.1 (p < 0.001). Average forward elevation of the shoulder went from 86.3° ± 9 preoperatively to 169.6° ± 15.9 at the end of the follow-up (p < 0.001). The strength score was significantly higher post-operatively (18.4 vs. 8.3, p < 0.001.). The ASES score was significantly improved 49.1 ± 13.1 vs. 88.6 ± 15.8, p < 0.001). The MRI assessment revealed 94% of Sugaya 1-2. No significant difference was observed between group 1 and 2 regarding all clinical outcomes. Two complex regional pain syndromes were described with a favorable evolution. Three patients presented a retear requiring an iterative arthroscopic repair.

CONCLUSION

The use of a knotless arthroscopic construct with flat-braided suture for small supraspinatus repair achieved excellent structural and clinical results. This technique is fully adequate for the arthroscopic treatment of such tears, enabling early mobilization.

LEVEL OF EVIDENCE

Level III.

Rotator Cuff Retears

» Regardless of recent advances in rotator cuff repair techniques, the rate of unhealed or recurrent rotator cuff tears remains high, with most recurrent rotator cuff tears occurring within the first 6 months after surgery. » Factors that can negatively affect tendon healing include older age, greater tear size, tendon retraction, and fatty infiltration. However, several clinical features that are often underestimated, including osteoporosis, diabetes, smoking, and hyperlipidemia, have proven to have an important influence on rotator cuff healing. » Recent meta-analyses that evaluated studies with Level-I and Level-II evidence have shown an overall increase in retear rates after single-row repair compared with double-row repair. However, to our knowledge, there are no Level-I clinical studies comparing different double-row configurations and, to date, no double-row repair technique has proven to be superior to the others. » The influence of postoperative rotator cuff healing on clinical outcomes is controversial. Although clinical differences may not be apparent in the short term, healed tendons have had better functional outcomes and greater strength in the midterm. » In general, a period of immobilization for 2 to 4 weeks, depending on tear size, is recommended. Graded supervised rehabilitation has proven to facilitate tendon healing without associated stiffness compared with early unprotected range of motion.

[Research progress of indication and treatment of graft in shoulder superior capsular reconstruction for rotator cuff tear]

Objective

To review the research progress of indication and treatment of graft in shoulder superior capsular reconstruction (SCR) for rotator cuff tear (RCT).

Methods

The literature related to shoulder SCR in recent years was extensively reviewed, and the anatomy, biomechanics, surgical indications, and treatment of graft in SCR were summarized.

Results

Superior capsule plays a role as a functional complex with rotator cuff, ligament, and whole capsule. SCR can effectively restore the superior stability of the shoulder. The indications of SCR include the irreparable massive RCT, massive RCT combined with pseudoparalysis shoulder, medium/large RCT with severe degenerative rotator cuff tissue, and dual-layer RCT. In order to achieve a better healing of tendon-bone in graft and decrease the rate of long-term graft retearing, it is essential to select an appropriate thickness graft, fix the graft in right intensity, and get a better capsular continuity.

Conclusion

The technique of SCR advanced to SCR for reinforcement and it is indicated from substantial massive RCT to severe degeneration of rotator cuff tissue. Graft treatment is the key step for a successful SCR.

Outcomes Following Double-Row and Medial Double-Pulley Rotator Cuff Repair

Multiple arthroscopic double-row repair techniques have been developed to treat full-thickness rotator cuff tears. However, healing rates and functional outcomes vary among these repair methods. A suture tape and medial double-pulley (STDP) technique that incorporated 2-mm suture tape for a knotless double-row with a broad double-mattress suture medially was developed as an alternative method to other double-row repair techniques. This prospective study reviewed the functional outcomes and healing rates of full-thickness supraspinatus tendon tears repaired using an STDP technique. Of 33 consecutive patients who underwent arthroscopic rotator cuff repair with an STDP construct, 24 patients with a minimum of 1 year of follow-up were included in the study. Preoperative fatty atrophy was recorded. Ultrasound imaging was used to assess rotator cuff healing at a minimum of 6 months postoperatively. Range of motion and functional outcome scores were evaluated at final follow-up. Mean active forward elevation improved from 124° preoperatively to 160° postoperatively. Comparing preoperative and postoperative values, the American Shoulder and Elbow Surgeons score improved from 45.9 to 90.8, the Single Assessment Numeric Evaluation score improved from 34.6 to 87.1, and the visual analog scale score decreased from 5.3 to 1.3. Twenty-one of 24 patients (88%) were satisfied with their outcomes. Ultrasound evaluation demonstrated complete healing in 88% of the cohort. The STDP technique is a technically efficient method of obtaining medial fixation in a double-row repair and appears to demonstrate clinically acceptable results. Healing was observed in 88% of cases, and functional outcome showed a statistically significant improvement. [Orthopedics. 2021;44(1):e125-e130.].

Comparison of clinical outcomes between knotted and knotless double-row arthroscopic rotator cuff repairs: a meta-analysis

Background

The ideal rotator cuff repair technique should allow for a quick and simple arthroscopic application which provides both adequate biomechanical stability and an appropriate biological state with the intention of promoting eventual healing of tendon to bone. While the biomechanical superiority of double-row repairs including higher repair strength, reduced gap formation, and wider footprint restoration have been proven, controversy remains regarding the clinical benefits of knotless compared with knot tying techniques. Our study aims to review the available evidence in the literature comparing the clinical outcomes between knotted and knotless transosseous double-row rotator cuff repair techniques.

Methods

A systematic literature search via PubMed, Embase, and Scopus was conducted by 2 independent reviewers. Studies reporting clinical outcomes of arthroscopic rotator cuff repair using the double-row knotted and knotless surgical techniques were identified. Data were analyzed with Review Manager 5.3, using Mantel-Haenszel statistics with both fixed and random effect models.

Results

A total of 1144 studies were identified from our initial search. Based on our inclusion and exclusion criteria, 8 studies were eventually selected for our review. The selected studies were published between 2012 and 2018. Of the 8 studies, 3 reported level 2 evidence and 5 reported level 3 evidence. There were a total of 589 subjects. Our meta-analysis revealed that there were no significant differences in functional outcomes postoperatively when comparing Constant score (mean difference = −1.85, 95% confidence interval: −4.42 to 0.73), University of California at Los Angeles score (mean differences = −0.14, 95% confidence interval: −0.90 to 0.62), and American Shoulder and Elbow Surgeons score (mean differences = −2.19, 95% confidence interval: −5.55 to 1.17) between patients who underwent knotted and knotless rotator cuff repairs.

Discussions and Conclusion

Our review revealed no statistically significant difference in functional outcomes between knotted and knotless transosseous double-row techniques for arthroscopic rotator cuff repairs. To our knowledge, this is the first meta-analysis related to this topic. However, no level 1 studies were available for this review. Further studies related to this topic should focus on reporting level 1 evidence comparing the clinical outcomes of knotless and knotted techniques for double-row repairs.

Arthroscopic Knotless-Anchor Rotator Cuff Repair

The most common type of rotator cuff lesion is a tear of the supraspinatus tendon, with arthroscopic rotator cuff repair representing an established treatment option^1-3. Several double-row techniques have been described to achieve complete coverage of the rotator cuff footprint. Among these is the bridging, double-row, transosseous-equivalent rotator cuff repair, which has become one of the most popular techniques for its maximized contact area and initial fixation strength^4-9. However, medial cuff failure is a common complication following this procedure^9-14. To reduce medial strangulation and overall surgical time, all-knotless anchor repair has been introduced as an alternative technique¹⁵. The arthroscopic knotless, bridging, double-row, transosseous-equivalent technique is performed with the patient in the beach-chair position via lateral operative and viewing portals. A medial row of suture anchors is placed in the usual fashion. The tendon is then perforated twice per anchor with use of a suture-passer device, after which the suture limbs are bridged over the tendon and fixed in a lateral row of anchors. Excellent functional outcomes as well as satisfaction in >90% of patients have been reported with the supraspinatus knotted double-row, bridging, transosseous-equivalent repair^{4,9,11,13,16-19}. No significant differences have been reported for clinical results and tendon integrity on magnetic resonance imaging when comparing knot-tying and knotless double-row transosseous-equivalent rotator cuff repair; however, the rate of medial cuff failure was lower among knotless procedures^{1,12,16,17,20-25}. The major steps of the procedure, which are demonstrated in this video article, include (1) diagnostic arthroscopy; (2) supraspinatus tear visualization and debridement; (3) decortication of the footprint on the greater tuberosity; (4) placement of the medial row of anchors loaded with nonabsorbable suture tape; (5) separate suture passage of each limb, perforating the tendon with use of a suture passer; (6) fixation of the tape in the lateral row of anchors, creating a bridging configuration; and (7) anterolateral acromioplasty with use of an arthroscopic burr. Complications are rare following this procedure. As postoperative rehabilitation is essential for tendon healing, the operative arm should be placed in an abduction brace for 6 weeks, with only passive mobilization.

Repair Integrity and Retear Pattern After Arthroscopic Medial Knot-Tying After Suture-Bridge Lateral Row Rotator Cuff Repair

BACKGROUND

Type 2 failure is a big issue after suture-bridge rotator cuff repair, which may be because of stress concentration at the medial row stitches. We have been performing medial knot-tying after suture-bridge lateral row repair to avoid the stress concentration. This study aimed to evaluate clinical and radiological outcomes after arthroscopic rotator cuff repair using this technique.

HYPOTHESIS

This technique would yield better radiological outcomes with a reduced type 2 failure rate compared with reported outcomes after conventional suture-bridge repair.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

The inclusion criteria of this study were (1) full-thickness tears, (2) primary surgery, and (3) minimum 2-year follow-up with pre- and postoperative magnetic resonance imaging (MRI). We investigated active ranges of motion (forward elevation and external rotation), as well as the Japanese Orthopaedic Association (JOA) and University of California, Los Angeles (UCLA), scores preoperatively and at the final follow-up.

RESULTS

This study included 384 shoulders in 373 patients (205 men and 168 women) with a mean age of 65 years (range, 24-89 years) at the time of surgery. The mean follow-up was 29 months (range, 24-60 months). There were 91 small, 137 medium, 121 large, and 35 massive tears. Postoperative MRI scans demonstrated successful repair in 324 shoulders (84.4%, group S) and retear in 60 shoulders (15.6%). Among 60 retears, 40 shoulders (67%) had type 1 failure (group F1) and 20 shoulders (33%) had type 2 failure (group F2). Forward elevation and external rotation significantly improved after surgery (P < .001 for both). Postoperative JOA and UCLA scores in group F2 were significantly lower than those in the other groups.

CONCLUSION

The medial knot-tying after suture-bridge lateral row repair demonstrated excellent functional and radiological outcomes after surgery, with a retear rate of 15.6%. The type 2 failure showed significantly inferior functional outcomes; however, the rate of type 2 failure was less relative to previous studies using conventional suture-bridge techniques. Our technique could be a good alternative to conventional suture-bridging rotator cuff repair because it may reduce the rate of postoperative type 2 failure.

Linked Double-Row Equivalent Arthroscopic Rotator Cuff Repair Leads to Significantly Improved Patient Outcomes

Background:

Biomechanical studies have demonstrated that arthroscopic rotator cuff repair using a linked double-row equivalent construct results in significantly higher load to failure compared with conventional transosseous-equivalent constructs.

Purpose:

To determine the patient-reported outcomes (PROs), reoperation rates, and complication rates after linked double-row equivalent rotator cuff repair for full-thickness rotator cuff tears.

Study Design:

Case series; Level of evidence, 4.

Methods:

Consecutive patients who underwent linked double-row equivalent arthroscopic rotator cuff repair with minimum 2-year follow-up were included. The primary outcome was the American Shoulder and Elbow Surgeons (ASES) score at final follow-up. Secondary outcomes included the Simple Shoulder Test (SST), shortened Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaire, visual analog scale (VAS), reoperations, and complications. Clinical relevance was defined by the minimally clinically important difference (MCID). Comparisons on an individual level that exceeded MCID (individual-level scores) were deemed clinically relevant. Comparisons between preoperative and postoperative scores were completed using the Student t test. All P values were reported with significance set at P < .05.

Results:

A total of 42 shoulders in 41 consecutive patients were included in this study (21 male patients [51.2%]; mean age, 64.5 ± 11.9 years; mean follow-up, 29.7 ± 4.5 months). All patients (100%) completed the minimum 2-year follow-up. The rotator cuff tear measured on average 15.2 ± 8.9 mm in the coronal plane and 14.6 ± 9.8 mm in the sagittal plane. The ASES score improved significantly from 35.5 ± 18.2 preoperatively to 93.4 ± 10.6 postoperatively (P < .001). The QuickDASH (P < .001), SST (P < .001), and VAS (P < .001) scores also significantly improved after surgery. All patients (42/42 shoulders; 100%) achieved clinically relevant improvement (met or exceeded MCID) on ASES and SST scores postoperatively. There were no postoperative complications (0.0%) or reoperations (0.0%) at final follow-up.

Conclusion:

Arthroscopic repair of full-thickness rotator cuff tears with the linked double-row equivalent construct results in statistically significant and clinically relevant improvements in PRO scores with low complication rates (0.0%) and reoperation rates (0.0%) at short-term follow-up.

Factors influencing operative time in arthroscopic rotator cuff repair: a comparison of knotless single-row vs. transosseous equivalent dual-row techniques

BACKGROUND

Despite the widespread use of arthroscopic rotator cuff repair (aRCR), there remains considerable debate on the benefits of a dual-row vs. a single-row (SR) repair technique. This study compares operative time of a knotless SR technique with transosseous equivalent (TOE) dual-row technique for aRCR and defines patient-specific factors that affect operative time.

METHODS

Data from 118 patients who underwent aRCR with a knotless SR technique was compared with data from 95 patients who underwent aRCR with a TOE technique by a single surgeon between 2014 and 2018. Baseline patient demographic information and operative time were recorded and compared between the 2 groups. Subgroup analysis was performed to determine if demographic information or tear size influenced operative time.

RESULTS

The average operative time in the SR group was 75.68 minutes and the average operative time in the TOE group was 89.24 minutes (P < .001). When controlling for all concomitant procedures, the operative time in the TOE group was 8.1 minutes longer than the SR group (P = .029). Average tear size in an anterior-posterior direction was larger in the TOE group vs. the SR group, 26.09 mm vs. 15.18 mm (P < .001).

CONCLUSION

When controlling for concomitant procedures, a knotless, TOE dual-row technique for aRCR adds an average of 8 minutes' operative time compared with a knotless SR technique. This was despite a significantly larger tear size in the TOE group.

Does the Use of Knotted Versus Knotless Transosseous Equivalent Rotator Cuff Repair Technique Influence the Incidence of Retears? A Systematic Review

PURPOSE

To compare knotted and knotless transosseous equivalent (TOE) rotator cuff repair (RCR) techniques and evaluate their imaging-diagnosed retear rates.

METHODS

The Cochrane Database of Systematic Reviews, the Cochrane Central Register of Controlled Trials, PubMed (2008 to 2019), EMBASE (2008 to 2019), and Medline (2008 to 2019) were used to perform a systematic review and meta-analysis using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) criteria, with the following search terms: rotator cuff repair AND (knotless OR knotted) AND transosseous; rotator cuff repair AND (knotless OR knotted or transosseous); rotator cuff repair AND ("suture bridge" OR "suture bridging"). Data pertaining to demographic characteristics, surgical techniques, retears, and patient-reported outcomes were extracted from each study. Rates and locations of retear were reported using ranges, and risks of bias and heterogeneity for each study were assessed.

RESULTS

A total of 7 studies (552 shoulders) were included. Patients had a weighted mean (± standard deviation) age of 60.5 ± 2.4 years with 27.8 ± 7.9-month follow-up. The incidence of retears ranged from 5.1% to 33.3% in patients treated with knotless TOE RCR, and the incidence for patients treated with knotted TOE RCR ranged from 7.5% to 25%. The incidence of type I retears ranged from 42.9% to 100% for patients treated with knotless TOE RCR and 20% to 100% for patients treated with knotted TOE RCR. The incidence of type II retears ranged from 0% to 57.1% in patients treated with knotless TOE RCR and 0% to 100% in patients treated with knotted TOE RCR.

CONCLUSIONS

The incidence and location of retears after knotless and knotted TOE RCR appear to be similar.

Optimizing the Double-Row Construct: An Untied Medial Row Demonstrates Equivalent Mean Contact Pressures in a Rotator Cuff Model

Background:

The merits of a double-row rotator cuff repair (RCR) construct are well-established for restoration of the footprint and lateral-row security. The theoretical benefit of leaving the medial row untied is to prevent damage to the rotator cuff by tissue strangulation, and the benefit of suture tape is a more even distribution of force across the repair site. These benefits, to our knowledge, have not been evaluated in the laboratory.

Hypothesis:

Leaving the medial row untied and using a suture bridge technique with suture tape will offer more even pressure distribution across the repair site without compromising total contact force.

Study Design:

Controlled laboratory study.

Methods:

A laboratory model of RCR was created using biomechanical research-grade composite humeri and human dermal allografts. The pressure distribution in a double-row suture bridge repair construct was analyzed using the following testing matrix: double-loaded suture anchors with the medial row tied (n = 15) versus untied (n = 15) compared with double-loaded suture tape and anchors with the medial row tied (n = 15) versus untied (n = 15). A digital pressure sensor was used to measure pressure over time after tensioning of the repair site. A multivariate analysis of variance was used for statistical analysis with post hoc testing.

Results:

The total contact force did not significantly differ between constructs. The contact force between double-loaded suture anchors and double-loaded suture tape and anchors was similar when tied (P = .15) and untied (P = .44). An untied medial row resulted in similar contact forces in both the double-loaded suture anchor (P = .16) and double-loaded suture tape and anchor (P = .25) constructs. Qualitative increases in focal contact pressure were seen when the medial row was tied.

Conclusion:

An untied medial row did not significantly affect the total contact force with double-loaded suture anchors and with double-loaded suture tape and anchors. Tying the medial row qualitatively increased crimping at the construct’s periphery, which may contribute to tissue strangulation and hinder clinical healing. Qualitative improvements in force distribution were seen with double-loaded suture tape and anchors.

Clinical Relevance:

Both tied and untied medial rows demonstrated similar pressures across the repair construct.

Current Concepts in Rotator Cuff Repair Techniques: Biomechanical, Functional, and Structural Outcomes

There is substantial evidence indicating that double-row (DR) repair restores more of the anatomic rotator cuff footprint and is biomechanically superior to single-row (SR) repair. Transosseous-equivalent (TOE) techniques have shown biomechanical advantages when compared with traditional DR, including increased contact at the rotator cuff footprint, higher pressure at the tendon-bone interface, and increased failure strength. Several meta-analyses of evidence level 1 and 2 studies have shown a lower rate of failed/incomplete healing when DR repair was compared with SR repair types. There is some limited evidence that TOE techniques improve healing rates in large and massive tears as compared with SR and DR. Overall, most level 1 and 2 studies have failed to prove a significant difference between SR and DR repairs in terms of clinical outcomes. However, most studies include only short-term follow-up, minimizing the impact that the higher rate of retears/failed healing seen with SR repairs can have in the long term. There are no high-quality clinical studies comparing different DR configurations, and there are currently not enough clinical data to determine the functional advantages of various DR technique modifications over one another. Although numerous biomechanical and clinical studies comparing different rotator cuff repair techniques have been published in the past decade, none has achieved universal acceptance. It is essential for the orthopaedic surgeon to know in detail the available literature to be able to apply the most appropriate and cost-effective technique in terms of healing and functional outcomes. This review provides a critical analysis of the comparative biomechanical and clinical studies among SR, DR, and TOE techniques reported in the literature in the past decade.

Arthroscopic Rotator Cuff Repair in 2019: Linked, Double Row Repair for Achieving Higher Healing Rates and Optimal Clinical Outcomes

The primary aim of rotator cuff repair surgery is to restore the musculotendinous units by creating a complete, tension-free repair construct that optimizes conditions for tendon-to-bone healing. There are many factors outside the control of the surgeon that are capable of affecting the healing process; however, there are also a number of important technical considerations that the surgeon can control, including familiarity with methods to deal with immobile tissues and techniques to perform novel repair constructs. It is clear that linked double row repairs are more likely to heal, and healed rotator cuff repairs best restore shoulder strength, improve patients' satisfaction, and maximize functional outcomes.

Arthroscopic Rotator Cuff Repair With a Knotless Suture Bridge Technique: Functional and Radiological Outcomes After a Minimum Follow-Up of 5 Years

PURPOSE

To evaluate clinical and radiological outcomes of knotless suture bridge repair after a minimum of 5 years of follow-up.

METHODS

A prospective consecutive series of full-thickness supraspinatus atraumatic chronic tears was evaluated in the study. Tears were medium or large. Further inclusion criteria were minimum clinical follow-up of 5 years with magnetic resonance imaging (MRI) at 24 months and fatty infiltration <2. Patients with shoulder stiffness, arthritis, or rotator cuff tear involving the subscapularis tendon were excluded. An arthroscopic cuff repair was performed using a knotless double-row suture bridge technique with braided suture tapes. Clinical outcomes were evaluated using the Constant score, the American Shoulder and Elbow Surgeons score, strength score, and a visual analog scale. Tendon healing was analyzed according to Sugaya MRI classification at 24 months. A Sugaya score of 1 or 2 was considered as tendon healing. Statistical analysis was performed with the Student's t-test. P = .05 were considered statistically significant.

RESULTS

Sixty-eight patients were included in this series. Mean follow-up was equal to 68.8 ± 7 months. At last follow-up, the mean visual analog scale, American Shoulder and Elbow Surgeons score, and Constant scores improved significantly from 5.5 ± 1.6, 48.2 ± 13.1, 37.8 ± 8.3, to 2.1 ± 2.1 (P = 5.43 E-14), 87.4 ± 15.8 (P = 7.15 E-27), and 82.8 ± 14.7 (P = 1.01 E-33), respectively. Anteflexion improved from 99.3° ± 13.4° preoperatively to 136.6° ± 15.9° at last follow-up (P = 3.08 E-21). Strength score was significantly higher postoperatively (18.4 ± 6.7 vs 8.3 ± 3.5). MRI showed 88% (n = 57) of Sugaya 1-2 repairs. Patients with unhealed rotator cuffs showed significantly lower functional results than the Sugaya 1-2 group. No correlation between degree of retraction and rate of healing was observed. Four symptomatic patients (6%) required revision for failed rotator cuff repair.

CONCLUSIONS

Despite potential confounding factors, arthroscopic knotless suture bridge repair of rotator cuff tears with acromioplasty demonstrated excellent long-term results of tendon healing, pain relief, and improvement of shoulder function.

LEVEL OF EVIDENCE

Level IV, therapeutic case series.

Does Medial-Row Fixation Technique Affect the Retear Rate and Functional Outcomes After Double-Row Transosseous-Equivalent Rotator Cuff Repair?

Background:

Double-row transosseous-equivalent (TOE) rotator cuff repair techniques have been widely accepted because of their superior biomechanical properties when compared with arthroscopic single-row repair. Concerns regarding repair overtensioning with medial-row knot tying have led to increased interest in knotless repair techniques; however, there is a paucity of clinical data to guide the choice of technique.

Hypothesis:

Arthroscopic TOE repair techniques using knotless medial-row fixation will demonstrate lower retear rates and greater improvements in the Constant score relative to conventional knot-tying TOE techniques.

Study Design:

Systematic review; Level of evidence, 4.

Methods:

A systematic review of 3 databases (PubMed, Cochrane, and Embase) was performed using PRISMA (Preferred Reporting Items for Systematic Meta-Analyses) guidelines. Inclusion criteria were English-language studies that examined repair integrity or Constant scores after arthroscopic rotator cuff repair with TOE techniques. Two investigators independently screened results for relevant articles. Data regarding the study design, surgical technique, retear rate, and Constant shoulder score were extracted from eligible studies. A quality assessment of all articles was performed using the Methodological Index for Non-Randomized Studies (MINORS) criteria.

Results:

The systematic review identified a total of 32 studies (level of evidence, 1-4) that met inclusion and exclusion criteria. Of the 32 studies, 5 reported on knotless TOE techniques, 25 reported on knot-tying TOE techniques, and 2 reported on both. In the knotless group, retear rates ranged from 6% to 36%, and Constant scores ranged from 38-65 (preoperative) to 73-83 (postoperative). In the knot-tying group, retear rates ranged from 0% to 48%, and Constant scores ranged from 42-64 (preoperative) to 55-96 (postoperative).

Conclusion:

Despite several theoretical advantages of knotless TOE repair, both knotless and knot-tying techniques reported considerable improvement in functional outcomes after rotator cuff repair. Although tendon failure rates showed a downward trend in knotless studies, additional prospective studies are warranted to better understand the role of medial-row fixation on tendon repair integrity and postoperative clinical outcomes.

Patellar Tendon Graft Anterior Cruciate Ligament Reconstruction Technique With Suture Tape Augmentation

Suture tape augmentation for repair and in combination with reconstruction with grafts has been described for multiple procedures. To date, no description of a patellar tendon graft anterior cruciate ligament reconstruction with an augmented graft has been published. This Technical Note details a technique we developed to incorporate a cross-linked suture tape into a patellar tendon graft.

Arthroscopic double-row rotator cuff repair: a comprehensive review of the literature

Rotator cuff repairs seek to achieve adequate tendon fixation and to secure the fixation during the process of biological healing. Currently, arthroscopic rotator cuff repair has become the gold standard. One of the earliest defined techniques is single-row repair but the inadequacy of single-row repair to precisely restore the anatomical footprint as well as the significant rates of retear especially in large tears have led surgeons to seek other techniques. Double-row repair techniques, which have been developed in response to these concerns, have various modifications like the number and placement of anchors and suture configurations.

When the literature is reviewed, it is possible to say that double-row repairs demonstrate superior biomechanical properties. In regard to retear rates, both double row and transosseous equivalent (TOE) techniques have also yielded more favorable outcomes compared to single-row repair. But the clinical results are conflicting and more studies have to be conducted. However, it is more probable that superior structural integrity will yield better structural and functional results in the long run. TOE repair technique is regarded as promising in terms of better biomechanics and healing since it provides better footprint contact. Knotless TOE structures are believed to reduce impingement on the medial side of tendons and thus aid in tendon nutrition; however, there are not enough studies about its effectiveness.

It is important to optimize the costs without endangering the treatment of the patients. We believe that the arthroscopic TOE repair technique will yield superior results in regard to both repair integrity and functionality, especially with tears larger than 3 cm. Although defining the pattern of the tear is one of the most important guiding steps when selecting the repair technique, the surgeon should not forget to evaluate every patient individually for tendon healing capacity and functional expectations.

Type 2 retear after arthroscopic single-row, double-row and suture bridge rotator cuff repair: a systematic review

AIM/PURPOSE

To provide a systematic review of the literature on patterns of retear after single-row (SR), double-row (DR) and suture bridge (SB) techniques.

METHODS

The PubMed and MEDLINE databases were searched for published articles reporting both repair technique and retear pattern. Studies in languages other than English, those reporting open rotator cuff repair as the index procedure, as well as animal and cadaveric studies and those which did not describe patterns of retear, were excluded. MINORS scoring system was used to quantify potential bias in each study. Retears were classified into type 1 (failure at the tendon-bone interface) and type 2 (medial cuff failure). For all studies included, number and type of retears after different repair techniques were reported and analyzed.

RESULTS

Fourteen studies were included yielding a total of 260 rotator cuff retears. Repair technique had a significant impact on the estimated incidence rate of type 2 retear (p = .001). The estimated incidence rate of type 2 retear was 24% with SR (95% CI 14-38%), 43% with DR (95% CI 22-66%), 62% with SB (95% CI 54-70%) and 38% with SB (95% CI 23-57%).

CONCLUSION

Despite the lack of high-quality evidence, this study suggests that DR and SB techniques increase the risk of medial cuff failure. Modifications in surgical techniques in both DR and SB repairs can help decrease that risk.

LEVEL OF EVIDENCE

Level IV, systematic review of investigations including level IV.

Clinical outcomes and repair integrity of arthroscopic rotator cuff repair using suture-bridge technique with or without medial tying: prospective comparative study

Background

There have been few studies comparing clinical and radiological outcomes between the conventional and knotless suture-bridge techniques. The purpose of this study was to evaluate and compare the functional outcomes and repair integrity of arthroscopic conventional and knotless suture-bridge technique for full-thickness rotator cuff tears.

Methods

We prospectively followed 100 consecutive patients (100 shoulders) with full-thickness rotator cuff tears treated with the arthroscopic conventional or knotless suture-bridge technique from October 2012 to July 2014. Enrolled patients returned for follow-up functional evaluations at 1 and 2 years after the operation. There were four outcome measures in this study: American Shoulder and Elbow Surgeons (ASES) scores, Shoulder Rating Scale of the University of California at Los Angeles (UCLA) scores, Constant scores, and visual analog scale (VAS) pain scores. Enrolled patients returned for follow-up magnetic resonance imaging or ultrasonography evaluation to confirm the integrity of the repaired cuff at 6 months post-operation (97% follow-up rate). Also, we investigated the preoperative cuff retraction of enrolled patients using preoperative MRI to find out correlation between the stage of cuff retraction and re-tear rate.

Results

At final follow-up, the average UCLA, ASES, Constant, and VAS scores had improved significantly to 32.5, 88.0, 80.4, and 1.3, respectively, in the conventional suture-bridge technique group and to 33.0, 89.7, 81.2, and 1.2, respectively, in the knotless suture-bridge technique group. The UCLA, ASES, Constant, and VAS scores improved in both groups after surgery (all p < 0.001), and there were no significant differences between the two groups at 2-year follow-up (p = 0.292, 0.359, 0.709, and 0.636, respectively). The re-tear rate of repaired rotator cuffs was 16.3% (8/49 shoulders) in the conventional suture-bridge technique group and 29.2% (14/48 shoulders) in the knotless suture-bridge technique group; this difference was not significant (p = 0.131). There were no significant differences between the re-tear rate of the two groups in the Patte stage I and II (p = 0.358 and 0.616).

Conclusions

The knotless suture-bridge technique showed comparable functional outcomes to those of conventional suture-bridge techniques in medium-to-large, full-thickness rotator cuff tears at short-term follow-up. The knotless suture-bridge technique had a higher re-tear rate compared with conventional suture-bridge technique, although the difference was not significant.

The optimal treatment for stage 2-3 Goutallier rotator cuff tears: A systematic review of the literature

Fatty infiltration is an important prognostic factor for cuff healing after rotator cuff repair. Treatment options for stage 2-3 Goutallier rotator cuff tears vary widely and there is lack of decent comparative studies.

Purposes

The objective of this study was 1) to give an overview of the treatment options of stage 2-3 Goutallier rotator cuff tears and their clinical outcome and 2) to give a recommendation of the optimal treatment within this specific subgroup.

Methods

We searched the databases of Medline, Embase, Cochrane library, NHS Centre for Reviews and Dissemination, PEDro from inception to December 12th, 2016. Two authors, F.H. and N.W., selected the studies after consensus. Data was extracted by one author (F.H.) and checked for completeness by a second author (N.W.). Our primary outcome was physical function, measured by shoulder-specific patient reported outcomes. Secondary outcomes were cuff integrity after rotator cuff repair, shoulder pain, general health, quality of life, activity level and adverse events.

Results

For the first research question 28 prospective as well as retrospective studies were included. For the clinical outcome of these treatments three randomized controlled trials were included.

Conclusions

Despite the high reported retear rate, rotator cuff repair has comparable results (clinical improvement) as partial repair and isolated bicepstenotomy or tenodesis. These findings suggest that the additional effect of rotator cuff repair compared to the less extensive treatment options like isolated bicepstenotomy or tenodesis should be studied, as these might form a good alternative treatment based on this systematic review.

Level of evidence

Level IV; systematic review.

Predictors of outcomes after arthroscopic transosseous equivalent rotator cuff repair in 155 cases: a propensity score weighted analysis of knotted and knotless self-reinforcing repair techniques at a minimum of 2 years

PURPOSE

To evaluate the outcomes of two commonly used transosseous-equivalent (TOE) arthroscopic rotator cuff repair (RCR) techniques for full-thickness supraspinatus tendon tears (FTST) using a robust multi-predictor model.

METHODS

155 shoulders in 151 patients (109 men, 42 women; mean age 59 ± 10 years) who underwent arthroscopic RCR of FTST, using either a knotted suture bridging (KSB) or a knotless tape bridging (KTB) TOE technique were included. ASES and SF-12 PCS scores assessed at a minimum of 2 years postoperatively were modeled using propensity score weighting in a multiple linear regression model. Patients able to return to the study center underwent a follow-up MRI for evaluation of rotator cuff integrity.

RESULTS

The outcome data were available for 137 shoulders (88%; n = 35/41 KSB; n = 102/114 KTB). Seven patients (5.1%) that underwent revision rotator cuff surgery were considered failures. The median postoperative ASES score of the remaining 130 shoulders was 98 at a mean follow-up of 2.9 years (range 2.0-5.4 years). A higher preoperative baseline outcome score and a longer follow-up had a positive effect, whereas a previous RCR and workers' compensation claims (WCC) had a negative effect on final ASES or SF 12 PCS scores. The repair technique, age, gender and the number of anchors used for the RCR had no significant influence. Fifty-two patients returned for a follow-up MRI at a mean of 4.4 years postoperatively. Patients with a KSB RCR were significantly more likely to have an MRI-diagnosed full-thickness rotator cuff re-tear (p < 0.05).

CONCLUSIONS

Excellent outcomes can be achieved at a minimum of 2 years following arthroscopic KSB or KTB TOE RCR of FTST. The preoperative baseline outcome score, a prior RCR, WCC and the length of follow-up significantly influenced the outcome scores. The repair technique did not affect the final functional outcomes, but patients with KTB TOE RCR were less likely to have a full-thickness rotator cuff re-tear.

LEVEL OF EVIDENCE

Level III, Retrospective Comparative Study.

Rotator Cuff Tears at the Musculotendinous Junction: Classification and Surgical Options for Repair and Reconstruction

Although uncommon, rotator cuff tears that occur medially at the musculotendinous junction can result from acute trauma, anatomic force imbalance, or medial row cuff failure following a previous rotator cuff repair. The quality of the torn muscle and tendon along with the length of the remnant tendon stump should be considered before deciding on the most appropriate repair technique. When muscle and tendon quality are sufficient, the tear can often be repaired directly to the remnant tendon stump and compressed onto the greater tuberosity. If the remnant tendon stump is degenerative, of insufficient length, or lacks tendon in which to place sutures, an allograft patch can be used to augment the repair. When the quality of the remaining muscle and tendon are poor or when the muscle is retracted too far medially and is nonmobile, a bridging technique such as superior capsule reconstruction is preferable. The purpose of this report is to (1) highlight that medial cuff failure can occur both primarily and after previous repair; (2) define and classify the 3 major tear patterns that are encountered, and (3) describe the authors' preferred techniques for medial cuff repair that specifically address each of the major tear patterns.

Relationship Between Age and Rotator Cuff Retear: A Study of 1,600 Consecutive Rotator Cuff Repairs

BACKGROUND

The prevalence of rotator cuff tears increases with age, and many patients undergo surgical repair. Retears are not uncommon, with rates ranging between 9% and 36% in recent studies, and are a major concern. The aim of this study was to investigate the relationship between patient age and the chance of healing following rotator cuff repair.

METHODS

This was a retrospective cohort study of patients who had undergone arthroscopic rotator cuff repair performed by a single surgeon. All patients had an ultrasound performed by a musculoskeletal sonographer 6 months after rotator cuff repair to assess the repair integrity.

RESULTS

The cohort of 1,600 patients was normally distributed in terms of age, with a mean age (and standard error of the mean) of 59 ± 0.3 years and a range of 15 to 91 years. The 212 patients (13%) who had a retear at 6 months were also normally distributed in terms of age, with a mean age of 65 ± 0.8 years and a range of 15 to 88 years. The retear rate in patients <50 years old was 5%. This increased to 10% in patients aged 50 to 59 years, 15% in those aged 60 to 69 years, 25% in those aged 70 to 79 years, and 34% in those aged ≥80 years. Multiple logistic regression analysis showed that patient age was an independent factor strongly associated with retears.

CONCLUSIONS

The rate of rotator cuff retears is low in patients <50 years of age. The relationship between age and rotator cuff retears is linear in patients 50 to 69 years of age, with an increase of 5% between decades, and increases substantially in patients ≥70 years old.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Tight medial knot tying may increase retearing risk after transosseous equivalent repair of rotator cuff tendon

BACKGROUND

Retearing mechanism after transosseous equivalent (TOE) rotator cuff repair has not been fully clarified yet.

OBJECTIVE

The purposes of this study were to compare the stress distribution pattern in the tendon stump between knotted and knotless TOE repair and to investigate the role of suture tension applied during medial knot tying using a 3-dimensional finite element (3D-FE) method.

METHODS

Both knotted and knotless TOE repairs were simulated on the 3D-FE human rotator cuff tear model. Elastic analysis was performed to compare the stress distribution pattern inside the tendon between the two models. The amount of compressive load applied to the medial-row sutures was then changed as 0, 20, 40, 60, 80, and 100 N in the knotted model.

RESULTS

Knotted model demonstrated more distinct stress concentration inside the tendon around medial-row sutures than the knotless model. Mean von Mises equivalent stress in this area in the 0, 20, 40, 60, 80, and 100 N models was 0.26, 0.35, 0.50, 0.70, 1.11, and 1.14 MPa, respectively.

CONCLUSIONS

In the knotted TOE repair, tight medial knot tying might cause a high stress concentration around medial knots, which may constitute one of the pathogenetic factors of postoperative retearing at this site.

All-Suture Repair for Compressive Rotator Cuff Tears: Reducing the Traction of the Tissue

Tears of the rotator cuff are a frequent pathology, but the best surgical procedure remains unclear. The arthroscopic approach has become the gold standard, but there are many different suture configurations that can be used. We describe an all-suture repair system with which the anatomical reduction of the rotator cuff is achieved performing traction from the anchor of the lateral row to subsequently performing a suture bridge suture from the medial row. The major advantage of this technique is that it creates compression forces and minimizing tensioning of the tissue.

Biomechanical Comparison of Modified Suture Bridge Using Rip-Stop versus Traditional Suture Bridge for Rotator Cuff Repair

Purpose. To compare the biomechanical properties of 3 suture-bridge techniques for rotator cuff repair. Methods. Twelve pair-matched fresh-frozen shoulder specimens were randomized to 3 groups of different repair types: the medially Knotted Suture Bridge (KSB), the medially Untied Suture Bridge (USB), and the Modified Suture Bridge (MSB). Cyclic loading and load-to-failure test were performed. Parameters of elongation, stiffness, load at failure, and mode of failure were recorded. Results. The MSB technique had the significantly greatest load to failure (515.6 ± 78.0 N, P = 0.04 for KSB group; P < 0.001 for USB group), stiffness (58.0 ± 10.7 N/mm, P = 0.005 for KSB group; P < 0.001 for USB group), and lowest elongation (1.49 ± 0.39 mm, P = 0.009 for KSB group; P = 0.001 for USB group) among 3 groups. The KSB repair had significantly higher ultimate load (443.5 ± 65.0 N) than USB repair (363.5 ± 52.3 N, P = 0.024). However, there was no statistical difference in stiffness and elongation between KSB and USB technique (P = 0.396 for stiffness and P = 0.242 for elongation, resp.). The failure mode for all specimens was suture pulling through the cuff tendon. Conclusions. Our modified suture bridge technique (MSB) may provide enhanced biomechanical properties when compared with medially knotted or knotless repair. Clinical Relevance. Our modified technique may represent a promising alternative in arthroscopic rotator cuff repair.

Allograft Anterior Cruciate Ligament Reconstruction Utilizing Internal Brace Augmentation

Anterior cruciate ligament (ACL) tears are among the most common sports-related injuries. Although studies have reported reliable outcomes with allograft tissue, several studies have shown a higher failure rate in younger patients. Although ACL graft augmentation has been met with varying levels of success, internal bracing of an allograft represents a promising area in ACL reconstruction. The purpose of this article is to detail allograft preparation involving a collagen-coated, ultrahigh-molecular-weight polyethylene/polyester suture tape as an internal brace augmentation for ACL reconstruction using the all-inside ACL GraftLink Technique (Arthrex, Naples, FL).