Unconstrained total knee arthroplasty in significant valgus deformity: a modified surgical technique to balance the knee and avoid instability

Robotic total knee arthroplasty for moderate to high-grade valgus knee deformity: technique and outcomes

INTRODUCTION

Although the surgical techniques and functional outcomes of conventional total knee arthroplasty (TKA) are well-established, there is limited data available on robotic arm-assisted TKA (RATKA) in the context of valgus knee arthroplasty. The purpose of this study is to assess the efficacy of RATKA in the correction of moderate to severe valgus knee deformities using minimally constrained implants and to evaluate the short-term functional outcomes associated with this technique.

METHODS

This prospective study was conducted on patients with moderate to severe grade valgus knee deformity who underwent RATKA from August 1, 2020 to May 31, 2022. Of 873 primary RATKA cases, 48 cases had valgus knee deformities. Among these, 27 had grade 2-3 valgus with intact medial collateral ligament (MCL), two had grade 3 valgus with incompetent MCL, 14 had grade 1 valgus, and five had post-traumatic valgus deformities. Over a two-year follow-up period, functional outcomes were assessed using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and Knee Society Score (KSS), and complications were documented; however, radiological outcomes were not analyzed.

RESULTS

Among 27 patients with Grade 2-3 valgus, the final cohort included 21 patients (24 knees). The mean age was 58.33 ± 9.63 years and 70.8% were female. Ten (41.7%) patients had rheumatoid arthritis and 14 (58.3%) had degenerative osteoarthritis (OA). The median surgical time was 68.00 (13.00) minutes, and the median blood loss was 478.45 (176.25) mL. The valgus grade was reduced from a baseline value of 22.43 ± 7.05 degrees to 5.26 ± 1.53 degrees at 6 weeks. The WOMAC scores improved from 67.58 ± 7.27 at baseline to 1.38 ± 0.57 in the second year post-operatively. Similarly, the KSS scores improved from 26.67 ± 10.34 at baseline to 181.96 ± 7.20 in the second year. One patient sustained a Type II supracondylar femur fracture after a fall, managed with distal femur arthroplasty, while another had delayed tibia pin tract healing, treated with antibiotics and dressings.

CONCLUSION

RATKA facilitates precise correction of moderate to severe valgus deformity through enhanced surgical planning and execution, achieving adequate functional outcomes with minimal complications through the application of functional alignment philosophy.

Combined femoral and tibial component total knee arthroplasty device rotation measurement is reliable and predicts clinical outcome

BACKGROUND

The optimal total knee arthroplasty (TKA) rotational alignment and how best to obtain and measure it are debatable. The aim was to analyse the reliability of the Berger femoral, three different tibial and four different combined two-dimensional computer tomography (2D-CT) TKA component rotation measurements, and to ascertain which rotational values best predict a successful clinical outcome.

METHODS

The 2D-CT scans were obtained post-operatively on 60 patients who had TKA. We determined one femoral [Berger's femoral angle (BFA)], three tibial [Berger's tibial angle (BTA), anatomical tibial angle (ATA) and bimalleolar posterior tibial component angle (BM_PTCA)] and four combined [transepicondylar posterior tibial component angle (TE_PTCA), bicondylar posterior tibial component angle (BC_PTCA, transepicondylar bimalleolar angle (TE_BM) and bicondylar bimalleolar angle (BC_BM)] TKA rotation angles. We made all measures in 23 patients twice by three observers and determined inter- and intra-observer agreement using the Bland-Altman plot method. We analysed measures of 55 patients using the area under the ROC curve (AUC) analysis to ascertain the discriminative capacity of BFA, ATA, TE_PTCA and BC_PTCA for predicting a successful clinical outcome according to the Knee Society Score (KSS) threshold.

RESULTS

ATA showed the smaller inter- and intra-observer average of differences (-0.1° and 1.6°, respectively) of the studied methods followed by BFA (-0.9° and 1.4°), TE_PTCA (-2.1° and 2.7°) and BC_PTCA (-0.5° and 1.8°). BFA (-4° to 2.1° and -6.1° to 8.8°) and BC_PTCA (-4.4° to 3.4° and -7.9° to 4.4°) showed the narrower inter- and intra-observer limits of agreement. A TKA device rotation (BC_PTCA) < 0.8° of external rotation (ER) predicted a KSS and KSS knee successful outcome, and < 3.8° ER for KSS functional (AUC = 0.889; 0.907 and 0.764, respectively). BFA and ATA < 0.9° ER and < 3.9° internal rotation (IR) predicted a successful KSS knee outcome (AUC = 0.796 and 0.889, respectively).

CONCLUSION

The ATA tibial component rotation measurement was the most reliable of those studied. BFA, TE_PTCA and BC_PTCA were reliable measures for TKA femoral and combined rotation. The presence of a minimal rotation between the TKA components (BC_PTCA) and a small femoral ER or tibial IR predicted a successful KSS outcome.

LEVEL OF EVIDENCE II

Knee valgus deformity and lateral bone defects affect the function of superficial medial collateral ligament: A finite element analysis

Purpose

The superficial medial collateral ligament (sMCL) is the primary restraint to valgus laxity of the knee, which is one of the significant indicators of implant selection in valgus knee. Our purpose is to explore the influence of knee valgus deformity and lateral bone defects in the function of sMCL.

Methods

the right knee joint of a healthy male volunteer was subjected to CT and MRI scans. The scanned data were imported into Mimics, Geomagic, Solidworks and Ansys software to establish a three-dimensional finite element model of the human knee joint. Femorotibial angle (FTA)5°,10°,15°,20°,25°,30°,35° and lateral bone defect 0,0.5,1,1.5,2 cm are controlled in Solidworks. Tensile test in vitro of maximum load on sMCL was simulated in Ansys.

Results

The peak stress of sMCL is raising with valgus deformity while there is no lateral defect. Increasing lateral bone defect can lessen the augmentation of the stress of sMCL caused by the valgus deformity. The peak stress of sMCL when it is in maximum load is 35.252 MPa. While valgus 35°, the peak stress of sMCL exceeds the value, with or without bone defect; the same is true for the valgus 30° with 0, 0.5, 1 cm bone defect and valgus 25° without defect.

Conclusion

Our findings allow for preoperative evaluation of sMCL function in the valgus knee, which would play an instructive role to some extent for implant selection in total knee arthroplasty.

Is Cementless Total Knee Arthroplasty Safe in Women Over 75 Y of Age?

BACKGROUND

Cementless total knee arthroplasty (TKA) is the subject of renewed interest. Previous concerns about survivorship have been addressed and there is an appeal in terms of biological fixation and surgical efficiency. However, even surgeon advocates have concerns about the risk of marked subsidence when using this technology in older patients at risk for osteoporosis.

METHODS

This was a retrospective analysis of 1,000 consecutive fully cementless mobile bearing TKAs performed at a single institution on women over 75 years of age who had postoperative and 1-year x-rays. The primary outcome was the incidence of subsidence.

RESULTS

There were three asymptomatic cases with definite subsidence and change in alignment. In a fourth symptomatic case, the femoral component subsided into varus and the tibia into valgus, thus maintaining alignment which facilitated nonoperative treatment in a 92-year-old. Overall, at 1 year, there were two- liner revisions for infection without recurrence. Five patients had further surgery, of which three were washouts and two were for periprosthetic fractures sustained postoperatively within 1 year. Seven patients had further anesthesia, of which five were manipulations and two were nonrecurrent closed reductions for spinouts.

CONCLUSION

Cementless TKA did not have a high risk of subsidence in this at-risk population. In the hands of experienced surgeons, these procedures can be used safely irrespective of bone quality.

Medially congruent total knee arthroplasty in valgus knee deformities yields satisfactory outcomes: a multicenter, international study

PURPOSE

Postoperative instability represents one of the most common complications following primary total knee arthroplasty (TKA). To prevent this outcome, valgus deformities have been historically treated using more constrained implants. The purpose of this study was to evaluate the outcome of treating a moderate valgus deformity by combining a surgical technique used to release the postero-lateral soft tissue envelope with the use of a medially congruent (MC) TKA design without using classical, semi-constrained inserts.

METHODS

Seventy-nine MC TKAs were performed by three surgeons at three institutions between 2016 and 2018 as part of a multicenter, international study. Inclusion criteria were: radiographic late-stage osteoarthritic knees with Ranawat's type 1 or 2 classification of valgus deformity and integrity of the medial capsular-ligament complex (less than 10 mm of medial opening during valgus stress test at 10° of knee flexion). Exclusion criteria were: BMI > 40; neuromuscular, metabolic, or immunologic disorders; or the inability to complete outcome measures or radiographic assessment.

RESULTS

Seventy-seven patients (79 knees), 59 males and 18 females, were evaluated at 2-year minimum follow-up according to the Knee Society Score (KSS) and Forgotten Joint Score (FJS). Mean age at surgery was 70 years (range 48-91). The mean range of motion (ROM) improved from 110° (range 85°-130°) preoperatively to 121° (range 105°-135°) (p < 0.001) at the time of the last follow-up. Preoperative knee extension significantly improved from 3° (range - 15° to 20°) to 1° (range - 5° to 5°) of flexion at the last follow-up in all the patients. KSS and KSS Functional scores were 89 (range 65-100) and 82 points (range 55-100), respectively. The FJS obtained at the last follow-up was 72 (range 49-88). Two patients (2.5%) had major postoperative complications (one periprosthetic joint infection; one postoperative patellar fracture) requiring surgical interventions.

CONCLUSIONS

In different surgeon's hands, the use of a modern medially congruent TKA design yielded good clinical outcomes at 2 years in a consecutive series of TKA in valgus arthritic knees. Postoperative instability was not recorded in this series and this finding was related to the high conformity design of the MC polyethylene insert, which significantly differs from classical posterior-stabilized (PS) designs.

LEVEL OF EVIDENCE

IV.

Lateral approach total knee arthroplasty achieves equivalent patellar tracking in severe valgus deformity compared to mild valgus deformity

PURPOSE

Patellar tracking problems represent 2-10% of complications of total knee arthroplasties (TKA) in valgus knees. However, there are no studies assessing patellar tracking according to the severity of the valgus deformity. The hypothesis was that lateral approach TKA in severe valgus deformity provides equivalent patellar tracking to that in knees with mild valgus deformity.

METHODS

Between 1988 and 2016, 77 TKAs were performed via a lateral approach on a severe valgus deformity (HKA > 195°). Forty-three TKAs performed without tibial tubercle osteotomy and with complete radiological data were included in this study. These were compared with 86 matched TKAs performed via a lateral approach with a mild valgus deformity (HKA between 181° and 190°). Patellar tilt and patellar position were assessed by axial view radiographs at the last follow-up. Complications and clinical outcomes were also evaluated.

RESULTS

The follow-up was mean 52 ± 21 months in the severe valgus group. No significant differences were found between the severe valgus deformity group and the mild valgus deformity groups in patellar tilt (1.6° ± 6.6° versus 1.9° ± 3.2°, respectively) or patellar subluxation. There were complications in 12% (n = 5) and 11% (n = 9) of the severe valgus group and the mild valgus group respectively, without significant difference. There was no significant difference in extensor mechanism complication rate (2.3% versus 4.7%, respectively).

CONCLUSION

Lateral parapatellar approach, without tibial tubercle osteotomy, for TKA in severe valgus deformity results in good patellar tracking. With this approach, the extensor mechanism complication rate in severe valgus deformity was not higher than for mild valgus deformity.

LEVEL OF EVIDENCE

III.

The use of mobile bearing TKA in valgus deformities - A clinical study

BACKGROUND

The number of patients presenting valgus deformities undergoing total knee arthroplasty (TKA) represents approximately 10% of the total number of TKAs performed: the presence of valgus deformity requires the implant to have proper alignment, stability and balance to achieve successful clinical outcomes, especially for knees with high coronal deformities, but these have proven to be difficult goals to achieve and therefore the use of constrained prostheses is often recommended for these cases. However, even though the use of unconstrained mobile bearing for severe knee deformities is rare, it has been shown to give successful outcomes and therefore the aim of this study is to evaluate whether this surgical technique can achieve satisfactory clinical results and correct alignment, as well as good patient satisfaction.

METHODS

This study presents the results of 69 TKA performed with cemented mobile bearing implants by a single surgeon on knee affected by valgus deformities. Asymmetric inserts were adopted for all the implants and an alignment surgical tool, dedicated for valgus patients, was used during the operation. Angles of valgus, WOMAC surveys and Numeric Rating Scale for pain were recorded to evaluate the results of the operations.

RESULTS

A total of 67 pre-op WOMAC questionnaire surveys were collected, with the mean result of this evaluation being 15.9 points. The Numeric Rating Scale for pain had an average of 2.2 for 68 tests. The deformities were corrected from a mean total preoperative valgus angle of 12.5° to a postoperative valgus deformity average of 0.6°. During follow-up, only one patient had serious complications due to the rupture of the extensor apparatus following a domestic accident involving falling. Further 10 patients have mild complications related to injuries such as pain of varying intensity, burning, or swelling of the knee. The level of satisfaction from 0 to 10 (0 not at all satisfied and 10 perfectly satisfied) had an average score of 7.7.

CONCLUSIONS

The surgical approach presented, involving a less constrained model if compared to the ones usually chosen, allowed to achieve correct alignment and high patient satisfaction using mobile bearing implants on valgus knee deformities; further patient follow-up will be performed to evaluate long-term outcomes, but the results achieved already represent a significative finding.

A ligament tensor-guided extramedullary alignment technique for distal femoral cut in total knee replacement: results at a minimum 3 years follow-up

BACKGROUND

Femoral intramedullary canal referencing is used by most knee arthroplasty systems for distal femoral cut; to avoid the opening of the femoral canal different solutions have been presented such as navigation, patient-specific instruments (PSI) or the use of an extramedullary device. The FuZion® system is a tensor device, created to merge the two main techniques for performing a total knee arthroplasty: the ligament balancing and measured resection techniques. Our idea was to use the tensor as an extramedullary cutting guide for the distal femoral cut, based on a 90° tibial resection.

METHODS

A total of 110 patients were operated on with this technique. Patients were evaluated with weight-bearing long-standing X-rays, knee a-p and lateral views, validated PROMs (Oxford Knee Score, EQ-5D and EQ-VAS), the Knee Society Scoring System (KSS) and the Forgotten Joint Score (FJS). Minimum follow up was 3 years (range 38-50 months).

RESULTS

Complete results were available for 104 patients (5 were lost in follow up and 1 died). Significant improvements were registered for all the evaluated scores from pre-op to the final follow up. Pre-op long-standing X-rays showed 21 valgus knees (20%) with a mean HKA of 187.6° (± 3.2°), 70 varus knees (62%) with a mean 172.2° (± 3.7°) HKA and 19 neutrally aligned knees, with a mean HKA of 179.5° (0 ± 2°). The radiographic evaluation at 3 months post-op showed 20 valgus knees (mean HKA 183.7° ± 1.5°), 67 varus knees (mean HKA 176.1° ± 1.8°) and 23 neutrally aligned knees with a mean HKA of 179.3° (0 ± 2°). At final follow up the survival rate was 100% for revision of the implant as the endpoint. With any reoperation as the endpoint Kaplan-Meier survival estimate showed a survival rate of 95.1% at 3 years.

CONCLUSIONS

This technique for performing a ligament driven alignment in total knee arthroplasty showed encouraging clinical outcomes at mid-term follow up leaving a residual deformity on the coronal plane.

Total Knee Arthroplasty for Valgus Deformity via a Lateral Approach: Clinical Results, Comparison to Medial Approach, and Review of Recent Literature

BACKGROUND

Total knee arthroplasty (TKA) for valgus deformity is a challenge. The standard medial parapatellar approach may not be universally useful for this. We have adopted the lateral approach to valgus knees. Here we describe our experience with this approach, present early results, and compare them to the medial approach.

METHODS

Our institutional registry was queried for all patients with valgus deformity who underwent a TKA via a lateral approach between 2013 and 2016. The registry was also queried for patients with valgus deformity who underwent a TKA through a medial approach in previous years and this data was compared to the study group.

RESULTS

Seventy-nine valgus knees in 72 patients were operated through a lateral approach. Deformity was corrected by 10.8°, from 16.2° to 5.4° (P < .001). Patellar tilt improved from -2.3° to 0.3° (P = .037). Seven implants (9%) were constrained. Mean operating time was 87 minutes (range 53-137). Twenty-five knees in 23 patients were operated via the medial approach. Deformity was corrected by 7.3°, from 13.2° to 5.9° (P < .001). Mean operating time was 137 minutes (range 90-230). Constrained implants were used in 16% of cases. The lateral approach allowed better correction of valgus deformity (10.8 vs 7.3, P = .03) and shorter operative times (87 vs 137 minutes, P < .001).

CONCLUSION

A lateral approach TKA for valgus deformity improves knee alignment and patellar tilt. Compared to the medial approach, it allows better correction of the deformity, shorter operating times, and perhaps less use of constrained implants.

Polyethylene spinout in the Attune® Cruciate-Retaining Rotating-Platform (CR RP) total knee arthroplasty performed with a cruciate-sacrificing and measured-resection technique

INTRODUCTION

Polyethylene (PE) spinout is a known but uncommon complication when using a mobile-bearing (MB) total knee arthroplasty (TKA) design. Sacrificing the posterior cruciate ligament (PCL) is within the manufacturer's recommendations for the Attune® Cruciate-Retaining Rotating-Platform (CR RP) knee design.

AIM

To discuss the potential aetiology and prevention of spinout in the Attune® CR RP knee.

METHODS

We used a retrospective radiological review from two centres reporting a higher rate of spinout in the Attune® CR RP knee using a cruciate-sacrificing and measured-resection technique when compared to a gap-balancing technique. Three hundred and thirty-two patients were evaluated over a 3-year period.

RESULTS

There were 8 out of 279 (2.86%) cases of spinout in our first cohort of patients using a measured-resection technique. There were 0 out of 53 cases of spinout in our second cohort of patients where a gap-balancing technique was used. One spinout was reduced closed, the other seven were initially revised to a thicker RP insert of the same design. Of these seven, three underwent a further revision TKA and one patient required a knee fusion/arthrodesis.

CONCLUSIONS

This study reports a higher incidence of PE spinout in the Attune® CR RP TKA when a measured-resection technique in combination with PCL resection is performed. We recommend a gap-balancing technique with conservative soft-tissue release if the surgeon is planning to sacrifice the PCL in the Attune® CR RP.

Total Knee Arthroplasty in Severe Valgus Deformity Using a Modified Technique-A 10-Year Follow-Up Study

BACKGROUND

Valgus knee deformity accounts for only 10% of total knee arthroplasties (TKAs), but is frequently considered the most challenging to manage. This study provides a 10-year follow-up on a previously reported series of severe valgus knees performed using an unconstrained mobile-bearing TKA with a modified technique to validate this technique.

METHODS

A consecutive series of 275 predominantly cementless TKAs in 262 patients were performed for severe valgus (≥10°) deformity and prospectively followed to 10 years. Patient-reported outcome measures included the Oxford Knee Score, American Knee Society Score, Bartlett Patellar Score, and the Short Form 12 questionnaire.

RESULTS

Average valgus deformity was reduced from 15.6° to 3.8° (P < .001). At a mean follow-up of 10.4 years (range, 9.5-14.1), 90 (34.4%) patients had died. Of the reviewed survivors, the mean Oxford Knee Score was 27.8 ± 9.8, with an American Knee Society clinical score of 85.6 ± 17.0 and a functional score of 65.1 ± 20.4, with 78% of patients reporting good to excellent results. To date, there has been 1 (0.36%) revision and 13 (4.73%) reoperations. Kaplan-Meier implant survival was 99.6% at 10 years.

CONCLUSION

Despite its challenging nature, the valgus knee is associated with excellent survivorship and satisfactory long-term results using this modified technique.

LEVEL OF EVIDENCE

Level IV.

Analysis of the bony geometry of the acromio-clavicular joint

Background

The primary goal of this study was to analyse the anatomic configuration of the acromio-clavicular joint in a healthy population to be able to develop a classification in a second step. On the basis of the primary findings a secondary goal was to find potential clinical indications in refer to AC-joint dislocation and lateral clavicle fractures.

Methods

The upper thoracic aperture including both shoulder joints as well as both sterno-clavicular joints was retrospectively reformatted in a bone kernel in axial orientation with 0.6 mm slice thickness out of existing multiple trauma or post mortem computed tomography (CT) scans. The DICOM data was converted into the STL file format using a three dimensional (3D) reconstruction software (Smartbrush, Brainlab, Feldkirchen, Germany). The data analysis was performed using a 3D—Computer Aided Detection (CAD) Software (BioCAD, Technical University Munich, Germany). For the analysis, the angle between the cranial surface of the acromion and the tangent to its articular surface was evaluated. Accordingly, the angle between the cranial surface of the clavicle and the tangent to its articular surface was assessed.

Results

Overall CT-datasets of 80 healthy patients (40 males, 40 females, mean age 45 ± 8 years) were enrolled and evaluated regarding the configuration of the AC-joint. In this context, three statistically significant (p < 0.001) different configurations of the AC-joint in terms of overhanging acromion, neutral type, overhanging clavicle were identified. The “overhanging acromion” type of AC-joint configuration turned out to be the most common type (46.2%) followed by the “neutral type” (38.4%) and finally the “overhanging clavicle type” (15.4%).

Conclusions

We assume that the shown differences of the AC joint congruency might play an important role in the development of different shoulder injuries resulting from the similar trauma mechanism. However, the proof of these assumptions will be the focus of future studies.

Identifying the period of greatest blood loss after lower limb arthroplasty

Background

The use of tranexamic acid (TXA) in total hip replacement (THR) typically reduces blood loss by approximately 400 mL, and typical total blood loss is still approximately 1 L. A barrier to harnessing the full potential of TXA is disagreement on the optimum timing of administration. To address this, we aimed to identify the period of greatest blood loss.

Methods

We analyzed the perioperative data of 870 patients who had undergone THR, total knee replacement, or unicompartmental knee replacement just before the introduction of TXA to our unit. Total blood loss was calculated on postoperative day (POD) 1 and POD2 using an equation based on change in hematocrit.

Results

Average total blood loss at POD2 was 1505, 1322, and 611 mL for THR, total knee replacement, and unicompartmental knee replacement, respectively. Between 86% and 96% of this blood loss occurred in the period between skin closure and POD1. Intraoperative loss did not correlate with total loss at POD2. Blood transfusion was more likely if the patient was female (odds ratio [OR], 6.8) or if they had preoperative anemia (OR, 8.3) than if there was a high-volume blood loss (OR, 1.6).

Conclusions

Approximately 90% of blood loss occurs between skin closure and the first postoperative 24 hours. “Intraoperative blood loss” and “transfusion rate” are not reliable markers of total blood loss. The full potential of TXA could be harnessed by using it during the period of greatest blood loss, that is, during the first postoperative 24 hours.

A prospective evaluation of a largely cementless total knee arthroplasty cohort without patellar resurfacing: 10-year outcomes and survivorship

BACKGROUND

The theoretical benefits of a mobile bearing design in Total Knee Arthroplasty (TKA) include increased articular surface conformity with a reduction in both polyethylene wear and implant interface shear. However, to date these theoretical advantages have not been translated into published evidence of superior survivorship. This paper presents the results of a prospective, non-comparative study evaluating the performance of the mobile bearing Low Contact Stress LCS Complete Rotating Platform TKA in a largely cementless cohort without patellar resurfacing.

METHODS

237 consecutive patients (240 knees) undergoing primary TKA were prospectively recruited. All received the LCS Complete Rotating Platform TKA (DePuy International, Leeds, UK). Clinical and radiographic assessments were performed at 3, 12, 60 and 120 months post-operatively. Radiographic evaluation was performed by an independent external surgeon.

RESULTS

The mean age was 70.3 years. 77.5% of cases were cementless. Radiographic assessment suggested excellent femoral component fixation. 22 tibial radiolucent lines (RLLs) > 1 mm were observed in 12 knees. No RLLs were progressive. There have been two revisions; one for late infection and one for aseptic loosening. No patients underwent secondary patellar resurfacing. The cumulative implant survivorship, using component revision for any reason as the endpoint, was 98.9% (95% CI, 95.6 to 99.7%) at 10 years.

CONCLUSIONS

The excellent survivorship at a minimum 10-year follow-up supports the use of uncemented porous coated fixation without patellar resurfacing with the non-posterior stabilized LCS Complete Rotating Platform TKA.