High variability of proximal tibial asymmetry and slope: a CT data analysis of 15,807 osteoarthritic knees before TKA

Is an excessively high posterior tibial slope a predisposition to knee injuries in children? Systematic review of the literature

BACKGROUND

The literature agrees that an increased posterior tibial slope (PTS) increases the risk of anterior cruciate ligament (ACL) rupture in adults. However, there is no consensus on the average normal value and it varies with growth. We carried out a systematic review of the literature to answer 4 questions faced with an increase in PTS in children: METHOD: We conducted a systematic review of the literature in accordance with PRISMA criteria. The inclusion criteria were all studies analyzing the association between increased PTS and the occurrence of knee disease in patients, the majority of whom were under 18 years of age or had immature skeletons. For each study, we recorded the demographic characteristics of the patients, the type of measurements performed, the PTS values and the association between the PTS value and the occurrence of pathology.

RESULTS

A total of 294 studies were identified. After analysis, 11 studies were included (n = 1173 patients). Six studies examined the association between PTS and anterior cruciate ligament (ACL) rupture (n = 5) or recurrence of rupture (n = 1). Two studies investigated the association between tibial slope and proximal tibial fracture and 3 studies investigated the association between tibial slope and growth disease (Osgood Schlatter (OSD) or osteochondritis dissecans of the knee). Of the 5 ACL studies, all studies found a significant increase in PTS in patients with ACL rupture (range min 2.1 ° max 4.3 °) compared with healthy subjects. Concerning growth lesions, 3 studies found an increased PTS in patients with OSD or osteochondritis. The studies concerning fractures of the proximal end of the tibia also found an increase in PTS.

CONCLUSIONS

This review highlighted the potential link between an abnormally high PTS value and the occurrence of knee pathologies in children, in particular ACL rupture. Children with a high PTS and an ACL rupture will require longer-term follow-up and should be warned of the greater risk of re-rupture.

LEVEL OF EVIDENCE

IV; systematic review.

Variability of three-dimensional knee morphology cannot be effectively assessed using a coronal plane knee alignment classification in total knee arthroplasty patients

Purpose

Optimal reproduction of the native three-dimensional (3D) alignment in total knee arthroplasty (TKA) influences outcomes; however, much of the modern TKA alignment research, such as the coronal plane alignment of the knee (CPAK), focuses only on coronal alignment. Tibial, femoral and tibiofemoral measurements on the axial and sagittal planes were evaluated for their relationship to the arithmetic hip-knee-ankle angle (aHKA) and joint-line obliquity (JLO). These 3D anatomical measurements are also evaluated across CPAK groups.

Methods

A retrospective analysis of the 360 Med Care computed tomography (CT) database was performed. Patient CT scans were segmented and landmarked. Linear regression analysis compared 12 axial and sagittal plane measurements (representing tibial, femoral and tibiofemoral rotation, tibial slope and femoral flexion) with both aHKA and JLO. Nonparametric tests assessed these anatomical measurements across the different CPAK groups, while Cohen's delta (d) determined the effect size.

Results

With a sample size of 7450 osteoarthritic knees, significant but weak relationships (r < 0.30) were observed between all 12 anatomical measurements and both aHKA and JLO. Tibiofemoral rotations between Insall's axis and both the posterior condylar and the surgical transepicondylar axes demonstrated large effect sizes (d > 0.80). However, trivial to small effect sizes (d < 0.50) were broadly observed across the 12 axial and sagittal measurements, underscoring their limited clinical significance.

Conclusions

While useful for describing coronal knee anatomy, CPAK phenotypes fail to differentiate tibial, femoral and tibiofemoral rotation, tibial slope or femoral flexion-crucial aspects of 3D surgical planning. Therefore, more comprehensive knee phenotyping solutions are required to guide individualised TKA alignment strategies.

Level of Evidence

Level II.

Effect of Posterior Tibial Slope on Knee Kinematics After Bicruciate-Retaining Total Knee Arthroplasty

Background

Following total knee arthroplasty (TKA), normal knee kinematics are rarely replicated. Retention of both cruciate ligaments (bicruciate retaining TKA) has helped this. Postoperative posterior tibial slope (PPTS) may further affect ligament tension and kinematics. The objective of this study is to determine how changes between the preoperative posterior tibial slope (PTS) and PPTS affect knee kinematics.

Methods

Twenty bicruciate retaining TKAs were performed using standard instrumentation. Fluoroscopic kinematic data were obtained during gait and a single knee bend. Differences (Δ) between radiographic measurements of preoperative and PPTS were correlated with in-vivo knee kinematics. Patients were separated into 2 groups based on their Δ values. Group I consisted of Δ values less than 0.7, indicating either a similar PPTS compared to preoperative PTS or a slightly flatter PPTS. Group II consisted of Δ values above 0.7, indicating a steepened PPTS.

Results

Preoperative PTS values ranged from -0.5° to 11.2°, with an average of 5.0° ± 3.4°. PPTS values ranged from 3.0° to 12.1°, with an average of 7.1° ± 3.1°. Weight-bearing range of motion (WBROM) measured from 94° to 139°, and femorotibial axial rotation ranged from -2.9° to 17.3°. A t-test revealed average values for WBROM in Group IT (Δ < 0.7) to be significantly greater than those for Group IIT (Δ > 0.7) (P = .01).

Conclusions

These findings indicate that either a PPTS approximating the preoperative PTS or a slightly flattened PPTS in comparison (Δ < 0.7) is associated with WBROM greater than 130°. Values for axial rotation and anterior sliding were not significantly associated with changes to the PTS.

Accurate surgical posterior tibial slope alteration can be achieved in total knee arthroplasty regardless of surgeon skill level or local soft tissue thickness-A retrospective radiograph-based study

PURPOSE

To retrospectively report on the impact of local soft tissue thickness and surgeon skill level on the accuracy of surgical posterior tibial slope (PTS) alteration achieved in patients undergoing total knee arthroplasty (TKA) utilising lateral knee radiographs.

METHODS

Pre- and postoperative radiographs of 82 patients undergoing primary TKA using conventional mechanical alignment technique were measured by two observers and subjected to quality criteria for accurate measurement of the PTS. All patients underwent a standardised surgical approach for PTS alteration: cruciate-retaining (CR) cases with preoperative PTS ≤ 10° were set for reconstruction of the preoperative PTS. Cases indicated for posterior-stabilised (PS) design and/or with a preoperative PTS > 10° were set for 3° of postoperative PTS. Pretibial subcutaneous fat (PSF) and surgeon skill level were analysed for their predictive quality regarding the accuracy of surgical PTS alteration achieved.

RESULTS

The overall mean postoperative PTS was significantly lower than the preoperative values (6.2°, SD 2.7 vs. 7.7°, SD 3.2; p = 0.002103). Neither local soft tissue thickness, namely PSF, nor surgeon skill level was found to be a predictor of the accuracy of surgical PTS alteration achieved. Among cases set for PTS reconstruction, 25.9% and 42.6% achieved a postoperative PTS within ±1° and ±2° of preoperative values, respectively. In patients with a PTS > 10° or those indicated for PS design, slope reduction was achieved with a mean postoperative PTS of 6.5°. Furthermore, 14.3% and 32.1% of cases were within ±1° and ±2° of 3, respectively.

CONCLUSION

This study demonstrates that accurate surgical alteration of the PTS is possible in TKA regardless of local knee soft tissue thickness or surgeon skill level. This proves the clinical feasibility of both targeted reduction as well as reconstruction of the PTS in TKA.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Evaluation of the relationship of posterior tibial slope with gender and age in Turkish population with 3 different methods

BACKGROUND

This study aimed to reveal the posterior tibial slope (PTS) angle with 3 different methods in a large case group in the Turkish population. In addition, the reproducibility of the measurement methods used was questioned while determining the age groups, gender and side relationship of this angle.

MATERIALS AND METHODS

In our retrospective study, radiographs of both knees were evaluated in all 610 patients (344 women, 56.4%) aged 25-65 years. PTS angles were measured by a radiologist and an orthopedist using anterior tibial cortex (ATC), posterior tibial cortex (PTC) and proximal tibial anatomical axis (PTAA) methods. The relationship of these angles with age group and gender, and the intra-class and inter-class correlations of all three methods were evaluated.

RESULTS

The mean and standard deviation (SD) of PTS angle was 11.03 ± 2.33° with ATC method, 6.25 ± 2.22° with PTC and 8.68 ± 2.16° with PTAA, and the difference was significant (p < .001). In the evaluation according to age groups, the highest mean PTS angles were detected in cases aged 25-35 (9.63 ± 1.97° [mean ± SD] by PTAA method), and there was a significant difference in comparison with other age groups (p < .05). In comparison with age groups, higher mean PTS angles were found in women and on the right side, but the difference was not statistically significant (p > .05). The intraclass and interclass correlation coefficient (ICC) of all three methods was excellent (ICC > 0.91).

CONCLUSION

This study emphasizes that the mean PTS angle in Turkish population is higher than the angle values ​​recommended by prosthesis manufacturers, and factors such as patient age and gender should be calculated in order to ensure more effective prostheses to be applied to patients.

Anterior metaphyseal angle; much less individual variation in determining the posterior slope of the tibia

BACKGROUND

The question of how to specify the posterior tilt of the tibia during arthroplasty operations remains unclear. The most current opinion is that a design whereby incisions are made in parallel with the individual pre-arthritic posterior tilt will yield better post-operational results. However, the wide range of inter-individual variations of posterior tilt of the tibia and the difficult task of identifying the shaft axis of the tibia through standard lateral radiographs are the main obstacles to this particular method. Therefore, there is a need for another reference line that can be measured with plain radiography and yields less inter-individual variation. The hypothesis of this study was that the angle formed between the anterior metaphyseal line of the proximal tibia and the tibial plateau would prove to be less variable across individuals.

METHODS

Long-shot radiographs of non-rotating lateral tibias of 85 patients aged between 18 and 38 years were analysed. The angle forming between the anterior metaphyseal line of the proximal tibia and the slope of the tibial plateau, and the posterior slope angle was measured by 2 separate observers using the classical method.

RESULTS

From the measurements of the posterior slope angle taken with the classical method, 38% (33/85) of the patients were within the ±2-degree range of the mean, and the anterior metaphyseal angle was within ±2 degrees of the mean in 75% (64/85) of the total patients. 44.23% variation (CoV) in posterior slop degrees, 2.73% (CoV) variation in the anterior metaphyseal angle measured by the same researchers. The difference between the percentages of variation was also found to be statistically significant. (z = 15.36, p = 0.000).

CONCLUSION

The anterior metaphyseal angle can be utilized to predict the individual posterior slope. Nevertheless, further large-scale, multicentre studies are needed to establish a mean value for the population.

Improved Knee Function with Customized vs. Off-the-Shelf TKA Implants-Results of a Single-Surgeon, Single-Center, Single-Blinded Study

BACKGROUND

Recent studies have been able to show certain benefits of Customized, Individually Made (CIM) compared to Off-the-Shelf (OTS) total knee arthroplasties (TKAs), but evidence is still lacking regarding the benefits of these implant systems. This study aimed to find differences in scores and functional outcome by comparing CIM and OTS implants, using Patient-Reported Outcome Measures (PROMs) and functional tests for activities of daily living in a single-surgeon setup.

METHODS

A total of 48 patients (16 CIM vs. 32 OTS) were consecutively enrolled and blindly examined. Functional testing was performed using four timed functional tests (TUG, WALK, TUDS, and BBS) and the VAS for pain. The Aggregated Locomotor Function (ALF) score was then calculated based on the addition of the average times of the three functional tests.

RESULTS

The CIM group showed significantly faster times in all functional tests and significantly better ALF scores. There were remarkable differences in the assessment of maximum pain sensation between the two groups, with superiority in the CIM group. The PROMs analysis revealed a higher proportion of excellent and good ratings for the items objective and function (KSS) in the CIM group.

CONCLUSION

The study showed that time-limited activities of daily living (ADLs) can be completed significantly faster with a CIM prosthesis and that a significantly higher percentage in this group reports freedom from pain during certain loads. Partial aspects of the PROM scores are also better in this group; however, this superiority could not be shown with regard to most PROM scores collected in this study.

Cutting-Edge Approaches in Arthroplasty: Before, during and after Surgery

Personalised medicine was introduced in arthroplasty a long time ago with the aim of respecting each individual person for their unique personal characteristics in order to further improve outcomes [...].

Comparison of the Tibial Posterior Slope Angle Between the Tibial Mechanical Axis and Various Diaphyseal Tibial Axes After Total Knee Arthroplasty

Background

The posterior tibial slope angle (PTS) is crucial for sagittal alignment after total knee arthroplasty (TKA). This study aimed to determine which PTS based on the lateral view of standard knee radiographs (LSKRs; 36 × 43 cm) reflects the PTS based on a full-length lateral tibial radiograph (FLTR).

Methods

A total of 290 patients (355 knees) who underwent primary TKA were retrospectively recruited. Cross-sectional views from the 3-dimensional digital model of the tibial prosthesis and bone complex in the sagittal plane were used as FLTRs and LSKRs. Considering the region 21.5 cm proximal to the site of FLTR as the spot for LSKR to determine the 5 tibial diaphyseal axes, the axis that simulates the PTS as determined by the tibial mechanical axis between the center of the tibial component and the ankle plafond in LSKR was determined and compared.

Results

PTS (α₅) defined by the line connecting the midpoints of tibial width between the region 10-cm distal to the knee joint and the distal end of the tibia based on LSKR revealed the least mean difference (0.13° ± 1.00°) and the strongest correlation (P < .001, r = 0.948) with PTS based on FLTR (α₀). The number of knees in α₅, indicating a difference of <2° from α₀, was 333 of 355 (93.8%). The equivalence test results indicated that α₀ and α₅ were statistically equivalent within a difference of 2° (P < .001).

Conclusions

PTS (α₅) can be used as a clinically reliable substitution of the true PTS on an FLTR for evaluating sagittal alignment after TKA.

Steep lateral tibial slope measured on magnetic resonance imaging is the best radiological predictor of anterior cruciate ligament reconstruction failure

PURPOSE

To identify the radiological predictive risk factors for anterior cruciate ligament reconstruction (ACLR) failure, compare the diagnostic accuracies of different parameters of conventional radiographs and magnetic resonance imaging (MRI), and determine the cutoff values for patients at higher risk.

METHODS

Twenty-eight patients who were diagnosed as ACLR failure via MRI or arthroscopic examination were included in the study group. They were matched to 56 patients who underwent primary ACLR with the same surgical technique and without graft failure at the minimum 24-month follow-up by age, sex, and body mass index. On true lateral whole-leg radiographs, the posterior tibial slope (PTS) referenced to the tibial mechanical axis (PTS-mechanical), PTS referenced to the tibial proximal anatomical axis (PTS-anatomical), and anterior tibial translation (ATT) were measured. On the sagittal slices of MRI, the medial tibial slope (MTS), medial tibial plateau (MTP) subluxation (MTPsublx), lateral tibial slope (LTS), and lateral tibial plateau (LTP) subluxation (LTPsublx) were obtained. Receiver operator characteristic (ROC) curves were constructed to compare the diagnostic performance and determine the cutoff values of different radiological parameters.

RESULTS

The study group demonstrated higher values of PTS-mechanical (10.7° ± 2.9° vs 8.7° ± 1.9°, p = 0.003), PTS-anatomical (13.2° ± 2.8° vs 10.5° ± 2.5°, p < 0.001), ATT (10.7 ± 3.3 mm vs 8.9 ± 2.2 mm, p = 0.014), LTS (9.4° ± 2.1° vs 5.5° ± 2.5°, p < 0.001), and LTPsublx (8.2 ± 2.8 mm vs 6.8 ± 1.9 mm, p = 0.009) as compared with the control group. The area under the ROC curve of LTS was significantly larger than that of PTS-mechanical (p = 0.006) and PTS-anatomical (p = 0.020). Based on the maximum Youden indexes, the cutoff values of PTS-mechanical, PTS-anatomical, and LTS were 10.1° (sensitivity, 64.3%; specificity, 78.6%), 12.0° (sensitivity, 71.4%; specificity, 71.4%), and 7.7° (sensitivity, 85.7%; specificity, 80.4%), respectively.

CONCLUSION

Due to the morphological asymmetry of the MTP and LTP, steep LTS measured on MRI is the best radiological predictor of ACLR failure. Detailed measurement of the LTS on MRI is recommended to evaluate the risk of ACLR failure prior to the surgery.

LEVEL OF EVIDENCE

III.

Proximal tibial morphology is associated with risk of trauma to the posteromedial structures during tibial bone resection reproducing the anatomical posterior tibial slope in bicruciate-retaining total knee arthroplasty

BACKGROUND

A tibial cut with the native posterior tibial slope (PTS) is a theoretical prerequisite in bicruciate-retaining total knee arthroplasty (BCRTKA) to regain physiological knee kinematics. The present study reveals tibial morphological risk factors of trauma to the posteromedial structures of the knee during tibial bone resection in BCRTKA.

METHODS

Fifty patients undergoing BCRTKA for varus knee osteoarthritis were analyzed. A three-dimensional tibial bone model was reconstructed using a computed tomography-based preoperative planning system, and the coronal tibial slope (CTS) and medial PTS (MPTS) were measured. Then, we set the simulated tibial cutting plane neutral on the coronal plane, posteriorly inclined in accordance with the MPTS on the sagittal plane, and 9 mm below the surface of the subchondral cortical bone (i.e., 11 mm below the surface of the cartilage) of the lateral tibial plateau. The association between the tibial morphology and the distance from the simulated cutting plane to the semimembranosus (SM) insertion (Dsm) was analyzed.

RESULTS

Of the 50 patients, 19 (38%) had negative Dsm values, indicating a cut into the SM (namely, below the posterior oblique ligament) insertion. The MPTS was negatively correlated with Dsm (r = -0.396, p = 0.004), whereas the CTS was positively correlated with Dsm (r = 0.619, p < 0.001). On multivariate linear regression analysis, the MPTS and CTS were independent predictors of Dsm.

CONCLUSION

In the setting of tibial cuts reproducing the native MPTS in BCRTKA, patients with larger PTS and smaller CTS had more risk of trauma to the posteromedial structures.

Posterior rim loading of a low-conforming tibial insert in unrestricted kinematic alignment is caused by rotational alignment of an asymmetric baseplate designed for mechanical alignment

PURPOSE

Because different targets are used for internal-external rotation, an asymmetric baseplate designed for mechanical alignment may lead to under-coverage and concomitant posterior rim loading in the lateral compartment following unrestricted kinematic alignment (KA) TKA. Recognizing that such loading can lead to premature wear and/or subsidence, our aim was to determine the cause(s) so that occurrence could be remedied. Our hypothesis was that baseplate design features such as asymmetric shape when aligned in KA would consistently contribute to posterior rim loading in the lateral compartment.

METHODS

Based on analysis of fluoroscopic images of 50 patients performing dynamic, weight bearing deep knee bend and step up and of postoperative CT images, five possible causes were investigated. Causes included internal rotation of the baseplate when positioned in KA; posterior position of the lateral femoral condyle at extension; internal tibial rotation with flexion; internal rotational deviation of the baseplate from the KA rotation target; and posterior slope.

RESULTS

The incidence of posterior rim loading was 18% (9 of 50 patients). When positioned in KA, the asymmetric baseplate left 15% versus 10% of the AP depth of the lateral compartment uncovered posteriorly for posterior rim loading and non-posterior rim loading groups, respectively (p = 0.009). The lateral femoral condyle at extension was more posterior by 4 mm for the posterior rim loading group (p = 0.003).

CONCLUSIONS

Posterior rim loading in the lateral compartment was caused in part by the asymmetric design of the tibial baseplate designed for mechanical alignment which was internally rotated when positioned in KA thus under-covering a substantial percentage of the posterior lateral tibia. This highlights the need for new, asymmetric baseplates designed to maximize coverage when used in KA.

LEVEL OF EVIDENCE

III.

Determining the rotational alignment of the tibial component referring to the tibial tubercle during total knee arthroplasty: the tibial tubercle-trochlear groove can be an aid

Background

There is no consensus on anatomic landmarks or reference axes with which to accurately align rotational position of tibial component. Using the tibial tubercle, commonly referring to the Akagi line and the Insall line, for anatomic reference was widely accepted. However, it is unknown about the predictors that may affect the reliability of using the tibial tubercle for aligning tibial component rotation. The aims of our study were (1) to investigate the reproducibility and accuracy of using the tibial tubercle for aligning tibial component rotation and (2) to determine predictors resulting in discrepancies of the tibial component rotation when referring to the tibial tubercle.

Method

A total of 160 patients with osteoarthritis were recruited before total knee arthroplasty. The angle α formed by the tibial anteroposterior (AP) axis and the Akagi line and the angle β formed by the tibial AP axis and the Insall line were measured to quantify the discrepancies of the Akagi line and the Insall line. Independent variables, including the tibial tubercle-to-trochlear groove distance (TT-TG), tibial tubercle to posterior cruciate ligament (TT-PCL), and knee rotation angle (KRA), hip–knee–ankle angle (HKA), medial proximal tibial angle (MPTA), and tibial bowing (TB), were measured. Pearson’s product moment correlation coefficients and multivariable linear regression analysis were calculated to assess relationships between independent variables and the two defined angles.

Results

All defined measurement were available for 140 patients. The Akagi line rotated internally with 1.03° ± 4.25° in regard to the tibial AP axis. The Insall line rotated externally in regard to the tibial AP axis with 7.93° ± 5.36°. Three variables, including TT-TG, TT-PCL, and KRA, tended to be positively correlated with the angle α and the angle β. In terms of a cutoff of TT-TG = 9 mm, 100% cases and 97% cases for using the Akagi line and Insall line, respectively, were located in the defined safe zone (− 5° to 10°).

Conclusion

The tibial tubercle (the Akagi line and Insall line) is found to be a useful and promising anatomic landmark for aligning the tibial component rotation. The TT-TG, with a cutoff value of 9 mm, is helpful to choose the Akagi line or Insall line, alternatively.

High inter- and intraindividual differences in medial and lateral posterior tibial slope are not reproduced accurately by conventional TKA alignment techniques

PURPOSE

The purpose of this study was to describe the medial and lateral posterior tibial slope (MPTS and LPTS) on 3D-CT in a Caucasian population without osteoarthritis. It was hypothesised that standard TKA alignment techniques would not reproduce the anatomy in a high percentage of native knees.

METHODS

CT scans of 301 knees [male:female = 192:109; mean age 30.1 ([Formula: see text] 6.1)] were analysed retrospectively. Tibial slope was measured medially and laterally in relation to the mechanical axis of the tibia. The proportion of MPTS and LPTS was calculated, corresponding to the "standard PTS" of 3°-7°. The proportion of knees accurately reproduced with the recommended PTS of 0°-3° for PS and 5°-7° for CR TKA were evaluated.

RESULTS

Interindividual mean values of MPTS and LPTS did not differ significantly (mean (range); MPTS: 7.2° ( - 1.0°-19.0°) vs. LPTS: 7.2° ( - 2.4°-17.8°), n.s.). The mean absolute intraindividual difference was 2.9° (0.0°-10.8°). In 40.5% the intraindividual difference between MPTS and LPTS was > 3°. When the standard slope of 3°-7° medial and lateral was considered, only 15% of the knees were covered. The tibial cut for a PS TKA or a CR TKA changes the combined PTS (MPTS + LPTS) in 99.3% and 95.3% of cases, respectively.

CONCLUSION

A high interindividual range of MPTS and LPTS as well as considerable intraindividual differences were shown. When implementing the recommended slope values for PS and CR prostheses, changes in native slope must be accepted. Further research is needed to evaluate the impact of altering a patient's native slope on the clinical outcome.

LEVEL OF EVIDENCE

IV.

A Comparison of Clinical Outcomes and Implant Preference of Patients with Bilateral TKA: One Knee with a Patient-Specific and One Knee with an Off-the-Shelf Implant

BACKGROUND

The purpose of this retrospective study was to compare clinical outcome results, perceived function, and overall preference among patients who had undergone staged bilateral total knee arthroplasty (TKA) with a cruciate-retaining, customized implant (customized TKA, or C-TKA) in 1 knee and an off-the-shelf (OTS) implant in the contralateral knee.

METHODS

Forty-seven patients (94 knees) from a single study center who underwent C-TKA in 1 knee and had previously undergone TKA with an OTS implant in the contralateral knee were included in this study. As the primary outcome measures, the Knee injury and Osteoarthritis Outcome Score, Joint Replacement (KOOS, JR) and the Forgotten Joint Score (FJS) were self-administered by the study subjects at a single follow-up time point. Additionally, a follow-up questionnaire to compare patients' perceived joint stability, knee mobility, perceived feeling of the replaced joint, pain levels, and overall preference between their knees was administered.

RESULTS

The average follow-up was 2.3 years (range, 0.7 to 3.8 years) for C-TKA and 6.7 years (range, 1.6 to 11.1 years) for the OTS TKA. Significantly higher KOOS, JR (82 versus 77; p = 0.03) and FJS (68 versus 58; p = 0.04) results were found with C-TKA. The evaluation of the follow-up questionnaire showed that more patients reported having "a little" or "a lot" less pain (49% versus 15%), better perceived mobility (45% versus 12%) and stability (36% versus 13%), and a more "normal" feeling of their knee (60% versus 10%) with the C-TKA implant compared with their OTS counterpart. When patients were asked to directly compare their knees, we found that 72.3% of the patients preferred the knee that received C-TKA over the contralateral OTS knee replacement, with 21.3% seeing no difference and 6.4% preferring the OTS knee replacement.

CONCLUSIONS

We believe that this is the first study to examine patient-reported outcomes of customized and OTS TKA implant designs in the same patient. We conclude that patients in this study cohort who underwent staged bilateral TKA with a C-TKA implant in 1 knee and an OTS prosthesis in the other knee reported better for their patient-specific knee replacement, with higher FJS and KOOS, JR values, and overall, preferred the C-TKA knee more often compared with the OTS knee replacement.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

The Impact of Total Knee Replacement with a Customized Cruciate-Retaining Implant Design on Patient-Reported and Functional Outcomes

Purpose: To treat patients with tricompartimental knee osteoarthritis (OA), a customized cruciate-retaining total knee arthroplasty (CCR-TKA) system can be used, including both individualized instrumentation and implants. The objective of this monocentric cohort study was to analyze patient-reported and functional outcomes in a series of patients implanted with the second generation of this customized implant. Methods: At our arthroplasty center, we prospectively recruited a cohort of patients with tricompartmental gonarthrosis to be treated with total knee replacement (TKA) using a customized cruciate-retaining (CCR) implant design. Inclusion criteria for patients comprised the presence of intact posterior cruciate and collateral ligaments and a knee deformity that was restricted to <15° varus, valgus, or flexion contracture. Patients were assessed for their range of motion (ROM), Knee Society Score (KSS), Western Ontario and McMaster University osteoarthritis index (WOMAC), and short form (SF)-12 physical and mental scores, preoperatively, at 3 and 6 months, as well as at 1, 2, 3, and 5 years of follow-up (FU) postoperatively. Results: The average age of the patient population was 64 years (range: 40–81), the average BMI was 31 (range: 23–42), and in total, 28 female and 45 male patients were included. Implant survivorship was 97.5% (one septic loosening) at an average follow-up of 2.5 years. The KSS knee and function scores improved significantly (p < 0.001) from, respectively, 41 and 53 at the pre-operative visit, to 92 and 86, respectively, at the 5-year post-operative time point. The SF-12 Physical and Mental scores significantly (p < 0.001) improved from the pre-operative values of 28 and 50, to 50 and 53 at the 5-year FU, respectively. Patients experienced significant improvements in their overall knee range of motion, from 106° at the preoperative visit to 122°, on average, 5 years postoperatively. The total WOMAC score significantly (p < 0.001) improved from 49.1 preoperatively to 11.4 postoperatively at 5-year FU. Conclusions: Although there was no comparison to other implants within this study, patients reported high overall satisfaction and improvement in functional outcomes within the first year from surgery, which continued over the following years. These mid-term results are excellent compared with those reported in the current literature. Comparative long-term studies with this device are needed. Level of evidence 3b (individual case–control study).

Relevance of the Tibial Slope on Functional Outcomes in ACL-Deficient and ACL Intact Fixed-Bearing Medial Unicompartmental Knee Arthroplasty

BACKGROUND

Excessive posterior tibial slope in medial unicompartmental knee arthroplasty (UKA) has been implicated in early failure. The purpose of this study was to evaluate the relationship between preoperative posterior tibial slope and postoperative slope of the implant (PSI) on outcomes in patients with anterior cruciate ligament (ACL) intact and ACL-deficient knees after fixed-bearing medial UKA.

METHODS

Patients who underwent a medial UKA between 2002 and 2017 with a minimum 3-year follow-up were included. Preoperative posterior tibial slope and postoperative PSI were measured. Outcomes measures included Knee Injury and Osteoarthritis Outcomes Score (KOOS) subscales, Lysholm, and VR-12. Failure was defined as conversion to total knee arthroplasty.

RESULTS

Of 241 knees undergoing UKA, 131 patients (70 women, 61 men; average age of 65 ± 10 years (average BMI of 27.9 ± 4) were included. For all patients, survivorship was 98% at 5 years and 96% at 10 years with a mean survival time for UKA was 15.2 years [95% CI: 14.6-15.7]. No failure had a PSI >7°. There were no superficial or deep infections. There were no significant differences in outcome scores between the ACL intact and the ACL-deficient group; therefore, the data were combined for analysis. At mean 8-year follow-up, KOOS pain scores were better in patients with PSI ≤7° (87 ± 16) than those with PSI >7° (81 ± 15). 76% of patients with PSI ≤7° reached the Patient Acceptable Symptom State for KOOS pain; whereas, 59% of patients with PSI >7° reached PASS for KOOS pain (P = .015).

CONCLUSION

Patients with postoperative posterior slope of the tibial implant >7° had significantly worse postoperative pain, without conversion to TKA, and with maintenance of high function. In ACL deficient and intact knees, nonrobotically-assisted, fixed-bearing medial UKA had a 96% survivorship at 10 years.

Patient Satisfaction, Functional Outcomes, and Implant Survivorship in Patients Undergoing Customized Unicompartmental Knee Arthroplasty

Customized unicompartmental knee arthroplasty (C-UKA) utilizes implants manufactured on an individual patient basis, derived from pre-operative computed tomography images in an effort to more closely approximate the natural anatomy of the knee. The outcomes from 349 medial and lateral fixed-bearing C-UKA were reviewed. Implant survivorship analysis was conducted via retrospective chart review, and follow-up analysis was conducted via a single postoperative phone call or email. The rate of follow-up was 69% (242 knees). The average age at surgery was 71.1 years and the average body mass index was 28.8 kg/m2. Seven revision arthroplasties (2.1%) had knowingly been performed at an average of 1.9 years postoperatively (range: 0.1-3.9 years), resulting in an implant survivorship of 97.9% at an average follow-up of 4.2 years (range: 0.1-8.7) and 97.9% at an average of 4.8 years (range: 2.0-8.7) when knees with less than two years of follow-up were excluded. The reasons for revision were implant loosening (one knee), infection (two knees), progression of osteoarthritis (two knees), and unknown reasons (two knees). The average KOOS, JR. interval score was 84 (SD: 14.4). Of those able to be contacted for follow-up analysis, 67% were "very satisfied," 26% were "satisfied," 4% were "neutral," 2% were "dissatisfied," and 1% were "very dissatisfied." When asked if the knee felt "natural," 60% responded with "always," 35% responded with "sometimes," and 5% responded with "never." After analyzing a large cohort of C-UKA, we found favorable rates of survivorship, satisfaction, and patient-reported functional outcomes.

Considerable inter-individual variability of tibial geometric ratios renders bone-implant mismatch unavoidable using off-the-shelf total knee arthroplasty: a systematic review and meta-analysis

PURPOSE

The purpose of this systematic review and meta-analysis was to investigate the variability in tibial geometric ratios among knees of different sexes and races to determine whether commercially-available tibial baseplates accommodate the morphologic diversity. The hypothesis was that anthropometric studies report considerable variability of tibial geometric ratios among sexes and races.

METHODS

This systematic review and meta-analysis was performed according to the preferred reporting items for systematic reviews and meta-analyses (PRISMA) criteria. Two authors independently conducted an electronic search using MEDLINE^® and Embase^® on 28 January 2021 for clinical studies reporting on tibial geometric ratios. Tibial geometric ratios, as reported by the clinical studies, were represented by plotting their means and two standard deviations for comparison to two symmetric and two asymmetric commercially-available tibial baseplates.

RESULTS

A total of 27 articles that reported on a combined total of 20,944 knees were eligible for data extraction. Variation in tibial aspect ratios was equal among sexes. The greatest variation in aspect ratio was observed among East Asians, followed by Caucasians, African-Americans, Indian and Middle Easterns. The variation in tibial asymmetry ratio was larger among men compared to women. The greatest variation in asymmetry ratio was observed among African-Americans, followed by Caucasians, East Asians, Indian and Middle Easterns. Bone-implant mismatch of > 3 mm overhang or > 4 mm under-coverage with four commercially-available tibial baseplates occurred in large proportions of knees due to variations in aspect ratio (in 17-100% of knees) and asymmetry ratio (in 7-100% of knees).

CONCLUSION

Anthropometric studies reported considerable inter-individual variability of tibial geometric ratios, which exceeded effects of sexual dimorphism and racial diversity. Bone-implant mismatch may be unavoidable in a large proportion of knees, when considering that a surgeon generally only uses one or a few TKA brands. These findings support the drive towards patient-specific implants to potentially achieve accurate bone-implant fit by implant customisation.

LEVEL OF EVIDENCE

IV.

CT Morphometric Analysis of Medial Tibial Condyles: Are the Currently Available Designs of Unicompartmental Knee Arthroplasty Suitable for Indian Knees?

BACKGROUND

The main purpose of this study is to assess the compatibility of medial tibial condyle (MTC) morphometry of Indian population with that of six contemporary UKA prostheses tibial components. We hypothesized that from the currently available UKA designs at least one would fit the MTC morphometry optimally as per the manufacturer's recommendation.

METHODS

We used CT morphometric data of 100 (66 males and 34 females) consecutive nonarthritic adult knees with reference to the MTC to assess the compatibility of currently available (in India) UKA prostheses. Each MTC was measured in the anteroposterior dimension, mediolateral at pre-defined points and the MTC aspect ratio calculated. Proportion of knees which could be optimally fitted with the existing UKA tibial components was calculated.

RESULTS

The mean age was 39.6 (SD 15.9) years. Anteroposterior and mediolateral dimensions in males were higher as compared to females (p < 0.001). As the anteroposterior dimension increased, the MTC aspect ratio decreased. There was asymmetry of anteroposterior halves with maximum mediolateral width being posterior to the central mediolateral width by 5.5 (SD 2.8) mm. Optimal anteroposterior fit ranged from 66 to 93%. However, optimal mediolateral fit as well, ranged from 5 to 37% with underhang present in 17-61% and > 2 mm medial overhang present in 0-35% cases. In 23% of cases, not a single implant could be fitted optimally.

CONCLUSION

Currently available UKA implants do not provide optimal tibial fit in nearly 25% of Indian patients. A surgeon needs to be aware of these limitations of existing implants when considering UKA.

[New technologies (robotics, custom-made) in unicondylar knee arthroplasty-pro]

BACKGROUND

Unicondylar knee arthroplasty offers the advantage that partial degenerative changes can be addressed with partial prosthetic solutions, thus preserving as much of the native joint as possible, including the cruciate ligaments. On the other hand, the number of revisions is still higher than for total knee endoprosthetics. In the literature, the causes mentioned are insufficient fit of the components as well as surgical errors. The use of new technologies to achieve a better fit and higher surgical precision and reproducibility, therefore, represents a promising approach.

INDIVIDUAL ENDOPROSTHETICS

Individual endoprosthetics offers the advantage that the prosthesis is adapted to the individual anatomy of each patient and not the patient's anatomy to the prosthesis, as is the case with standard prostheses. This allows for an optimal fit of the prosthesis while avoiding excessive bone resections and soft tissue releases.

ROBOTICS

The use of robotics in endoprosthetics makes it easier to correctly perform bone resections and align components. This ensures high and reproducible precision even for surgeons with lower case numbers. Studies on individual unicondylar endoprosthetics and robotics are reporting promising results. However, long-term results of high-quality randomized studies must be awaited in order to make a scientifically sound statement.

Contemporary knee arthroplasty: one fits all or time for diversity?

INTRODUCTION

Total knee arthroplasty (TKA) has historically been the preferred solution for any type of knee osteoarthritis, independently of the number of compartments involved. In these days of patient-specific medicine, mono-compartmental disease could also be approached with a more individualized treatment, such as partial knee arthroplasty (PKA). Off-the-shelf (OTS) implants are often the compromise of averages and means of a limited series of anatomical parameters retrieved from patients and the pressure of cost control by limited inventory. Personalized medicine requires respect and interest for the individual shape and alignment of each patient.

MATERIALS AND METHODS

A Pubmed and Google Scholar search were performed with the following terms: "patient-specific knee" and "arthroplasty" and "custom implant" and "total knee replacement" and "partial knee replacement" and "patellofemoral knee replacement" and "bicompartmental knee replacement". The full text of 90 articles was used to write this narrative review.

RESULTS

Unicondylar, patellofemoral and bicompartmental knee arthroplasty are successful treatment options, which can be considered over TKA for their bone and ligament sparing character and the superior functional outcome that can be obtained with resurfacing procedures. For TKA, where compromises dominate our choices, especially in patients with individual variations of their personal anatomy outside of the standard, a customized implant could be a preferable solution.

CONCLUSION

TKA might not be the only solution for every patient with knee osteoarthritis, if personalized medicine wants to be offered. Patient-specific mono-compartmental resurfacing solutions, such as partial knee arthroplasty, can be part of the treatment options proposed by the expert surgeon. Customized implants and personalized alignment options have the potential to further improve clinical outcome by identifying the individual morphotype and respecting the diversity of the surgical population.

Editorial Commentary: Posterior Tibial Slope: The "Unknown Size" of the Knee Joint

The posterior tibial slope (PTS) plays an immensely important role in almost every orthopaedic operation on the knee joint. The PTS is a decisive factor in the reconstruction of a torn anterior or posterior cruciate ligament, in high tibial osteotomy and, of course, in total knee arthroplasty. It is therefore all the more surprising that in current clinical practice relatively little emphasis is placed on the exact measurement of PTS. If the true value is not known, the influence of the same is pure coincidence. In the coronal plane, it is clinically valid practice to determine the hip-knee-ankle angle and thus to be able to determine the mechanical and anatomical axes at the tibia and femur. In the sagittal plane, however, an in-depth analysis is often dispensed with and only a short lateral knee radiograph is used. Different axes are described to determine the PTS. In addition, it is often overlooked that a determination of the PTS on lateral radiographs can only represent an average, since the medial and lateral tibial plateau shows considerable differences purely anatomically. In the future, we should place more emphasis on an analysis of the sagittal plane in the knee joint including PTS at least as profound as the analysis of the frontal plane. Here, radiographs of the entire lateral tibia must be requested to determine the true axis and thus the true PTS.