Osteoarthritic and non-osteoarthritic patients show comparable coronal knee joint line orientations in a cross-sectional study based on 3D reconstructed CT images

Restoration of anatomical knee phenotype is associated with improved postoperative clinical outcomes after total knee arthroplasty

BACKGROUND

A comprehensive assessment of knee phenotypes is crucial for optimizing surgical realignment strategies in total knee arthroplasty (TKA). This study aimed to investigate the relationship between the restoration of preoperative phenotypes, such as joint line orientation (JLO) and alignment, and clinical outcomes following TKA.

METHODS

A retrospective review was performed on the records of 1052 primary osteoarthritic knees that underwent mechanically aligned (MA) TKA between March 2016 and October 2021. Patient-reported outcome measures (PROMs) were assessed preoperatively and at 2 years postoperatively. Patients were categorized according to the coronal plane alignment of the knee (CPAK) classification system, which incorporates the arithmetic hip-knee-ankle angle (aHKA) as an indicator of constitutional alignment and JLO. Clinical outcomes were compared between patients whose knee phenotype was maintained and those in whom it was not restored.

RESULTS

Among osteoarthritic knees, the majority (59.4%) were classified as CPAK type I (varus aHKA, apex distal JLO) preoperatively. Using mechanical axis techniques, the native phenotype was restored in 127 (12.1%) of the 1052 cases. These patients demonstrated significantly better postoperative clinical outcomes, as measured by WOMAC function and Forgotten Joint Scores (FJS), compared with the non-restored group (P < 0.05). When alignment was adjusted through detailed analyses of patients with maintained alignment between preoperative and latest follow up assessments, the significant differences in WOMAC function and FJS outcomes between restored JLO and non-restored JLO groups persisted (all P < 0.05). No significant association was observed between the restoration of aHKA and clinical outcomes.

CONCLUSION

The restoration of the anatomical knee phenotype, particularly JLO, is associated with improved postoperative PROMs, notably in functional outcomes, following TKA. These findings underscore the clinical importance of prioritizing preoperative JLO for optimizing surgical outcomes, rather than focusing exclusively on overall limb alignment.

Femoral varus deformity predominates in male Chinese osteoarthritis patients with geographic variability in functional knee phenotypes

PURPOSE

The aims of this study were to generalise the distribution and sex differences in functional knee phenotypes in a Chinese osteoarthritis (OA) population and to compare the distributions of functional knee phenotypes across geographic regions.

METHODS

Knee phenotypes were evaluated according to Hirschmann's classification in 908 knees with OA, and the correlations among the hip-knee-ankle angle (HKA), femoral mechanical angle (FMA) and tibial mechanical angle (TMA) and their differences between the sexes were described. Studies reporting the distributions of functional knee phenotypes for arthritic knees were included to compare the variability in geographic distribution.

RESULTS

The average values (males, females) of the HKA (173.1 ± 5.4°, 174.0 ± 6.9°), FMA (90.5 ± 2.9°, 91.6 ± 3.5°), and TMA (85.7 ± 3.1°, 85.7 ± 3.6°) demonstrated that the Chinese OA population tended towards femoral and tibial varus deformities in both males and females. A total of 145 functional knee phenotypes were identified in all 908 knees, comprising 68 types in males and 136 types in females. The most common phenotypes were VARHKA6° + VARFMA3° + NEUTMA0° (5.7%) for all knees, VARHKA3° + NEUFMA0° + NEUTMA0° (7.4%) for males and VARHKA6° + VARFMA3° + NEUTMA0° (5.4%) for females. The incidence of femoral varus deformity was greater than that of tibial varus deformity in 48.4% of males and 36.5% of females, and the incidence of tibial varus deformity was greater than that of femoral varus deformity in 24.7% of males and 35.2% of females. Seven studies including 16,395 knees were identified. The main femoral and tibial phenotypes in different geographic regions were VARFMA3° and NEUTMA0°, but their proportional distributions differed significantly.

CONCLUSIONS

Sex differences in the functional knee phenotypes of OA patients in China were identified. Femoral varus deformity was more common than tibial varus deformity in males, whereas the difference was minimal in females. Moreover, functional knee phenotypes varied significantly across geographic regions.

LEVEL OF EVIDENCE

Level IV.

Increased prevalence and severity of femoral bone wear in Japanese patients with varus knee osteoarthritis

PURPOSE

The calliper technique in kinematic alignment total knee arthroplasty assumes nearly identical medial and lateral femoral condylar radii and negligible subchondral bone wear. However, racial differences were not considered. This study aimed to assess the degree and severity of bone wear in Japanese patients with varus knee osteoarthritis.

METHODS

This cross-sectional study included 155 knees from 130 patients who underwent total or unicompartmental knee arthroplasty for primary varus-type knee osteoarthritis between April 2020 and March 2024. Preoperative computed tomography scans were used to measure the femoral condylar radii via a circle-fitting technique. Bone wear was assessed at 0° and 90° by measuring the distance between the best-fit circle and the subchondral bone periphery, with additional measurements at the peak wear angle, if present.

RESULTS

Among 155 knees, 16 (10.3%) exhibited bone wear. Bone wear >1 mm at 0° was observed in 3.2% of the cases. The peak wear angle was 43.1 ± 5.0°, with a mean depth of 2.0 ± 0.7 mm. The medial and lateral condylar radii were nearly identical (18.3 ± 1.2 mm vs. 18.2 ± 1.2 mm, p = 0.002), with a strong correlation (R2 = 0.94, p < 0.001).

CONCLUSION

Bone wear exceeding 1 mm at 0° was observed in 3.2% of cases, while overall bone wear was present in 10.3% of knees. Although the difference in radii between the medial and lateral femoral condyles was statistically significant, it was clinically negligible. This finding supports the reliability of the cylindrical axis as a reference for surgical techniques. These results highlight the importance of recognizing potential racial differences in bone wear and underscore the need for accurate assessment to achieve anatomic restoration in kinematic alignment total knee arthroplasty.

LEVEL OF EVIDENCE

Level III.

Data beats dogma-Valgus knees are not associated with a hypoplastic lateral femoral condyle: A CT-based analysis from a high-volume institution

PURPOSE

Observations following the mechanical alignment principle have led to the concept that the lateral femoral condyle (LFC) is hypoplastic in valgus knee. This study aimed to investigate if this assumption is correct-the hypothesis was that there is no relationship between the radius of curvature of the LFC and coronal alignment.

METHODS

This is a retrospective study of prospectively collected patients who underwent primary robotic TKA between 2021 and 2023. Segmentation of the preoperative computerised tomography scan was performed to obtain a three-dimensional model of the knee. A semi-automated algorithm was used to create a circle of best fit to obtain the radius of each femoral condyle. The size of the condyles was expressed as the lateral-to-medial (L2M) condylar radii ratio. Patients were stratified based on hip-knee-ankle (HKA) angle and L2M ratio, and the association with the alignment was analysed. Distal and posterior offset were investigated and analysed. Significance was for p values < 0.05.

RESULTS

Overall, 498 consecutive knees were investigated. The mean HKA was 4.1 ± 5.4° varus. The mean L2M condylar ratio was 0.95 in patients with neutral alignment, 0.98 in varus alignment and 0.96 in valgus alignment. The L2M ratio was <1 in all alignment groups, with no significant differences between varus and valgus. The knees with a hypoplastic LFC (L2M ratio <0.9) showed a similar HKA distribution to those with L2M > 0.9. No differences in posterior offset of the LFC were noted between valgus, neutral and varus knees. The lateral distal offset was greater in valgus than neutral knees (27.1 ± 2.7 mm vs. 25.9 ± 2.9 mm).

CONCLUSION

The LFC is on average smaller than the MFC regardless of the coronal alignment, with no correlation with the HKA. These findings add evidence against the concept of a hypoplastic LFC in valgus knees.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Terminologies and definitions used to classify patients with osteoarthritis: a scoping review

OBJECTIVES

Osteoarthritis (OA), a prevalent and disabling condition, significantly burdens individuals and healthcare systems worldwide. It is characterized by joint pain, stiffness, and structural changes in cartilage, bone, and synovium. The clinical manifestations of OA vary widely, reflecting complex interactions among genetic, metabolic, biomechanical, and environmental factors. Despite progress in identifying OA clinical phenotypes, inconsistent terminology, including "phenotypes," "subtypes," and "subgroups," hinders effective communication and research translation. This review aims to synthesize existing literature on clinical OA phenotypes, terminology, and definitions and propose a research agenda.

METHOD

This scoping review followed PRISMA-ScR guidelines, focusing on publications from 2010 to 2023 investigating clinical phenotypes in adult OA patients. Searches were conducted in MEDLINE, SCOPUS, and EBSCOhost using combinations of terms related to clinical phenotypes in OA. Studies were screened, duplicates removed, and relevant data were charted and analyzed by two independent reviewers.

RESULTS

From 196 identified studies, 50 were included in the final analysis. Eight clinical phenotypes were categorized, including inflammatory, biomechanical, metabolic, and pain-sensitization. minimal joint disease, psychologically driven, menopause, severe radiographic. Most studies focused on knee OA, with limited exploration of hand, midfoot, and hip OA. Phenotype-based management strategies demonstrated potential for improving treatment outcomes and guiding research.

CONCLUSION

Standardizing terminology and leveraging phenotype-based frameworks hold promise for advancing personalized OA care and research. Future efforts should focus on validating criteria, developing accessible diagnostic tools, and addressing understudied OA phenotypes. This work highlights the value of tailoring interventions to specific OA phenotypes for improved patient outcomes.

CLINICAL TRIAL NUMBER

Not applicable.

Three-Compartment Phenotype Concept of Total Knee Arthroplasty Alignment: Mismatch Between Distal Femoral, Posterior Femoral, and Tibial Joint Lines

BACKGROUND

The purpose of the study was to assess whether patients who have different coronal alignment variations (functional knee phenotypes [FKP]) have distinctly different rotational alignment variations to justify an extension of the FKP concept to include rotational alignment parameters. The goals of the study were to: (1) determine the frequency of bony congruence between the anterior, distal, posterior femoral, and proximal tibial joint lines by using the extended FKP concept; and (2) connect these findings to clinical practice by simulating the impact of different alignment concepts on the most common FKP.

METHODS

The posterior condylar angle (PCA) and anterior trochlear angle (ATA) were measured in 265 knees without osteoarthritic (OA). The PCA measurements of 2,692 knees with OA were extracted from the database. The patients were categorized into phenotypes based on these parameters. A phenotype represents an alignment variation of either the posterior (= PCA) or anterior femoral joint line (= ATA) in the axial plane. Rotational phenotypes (i.e., combination of alignment variations of the anterior and posterior femoral joint lines) were linked with the coronal phenotypes of these patients. The effect of three alignment concepts (mechanical, restricted, and unrestricted kinematic) on the most common FKPs was assessed.

RESULTS

The distribution of the five most common coronal phenotypes did not differ among rotational phenotypes. The ATA and PCA were aligned parallel in 14.3% of the non-OA population. Distal femoral joint line (femoral mechanical angle), proximal tibial joint line (tibial mechanical angle), and PCA were aligned parallel in 17.0 and 11.2% of the non-OA and OA populations, respectively. All four joint lines (femoral mechanical angle, tibial mechanical angle, PCA, and ATA) were aligned in 2.3% of the non-OA population.

CONCLUSIONS

It is crucial to emphasize that preoperative assessment of a patient's anatomy should include the anterior and posterior femoral joint lines. The extended FKP concept could aid in this assessment and help identify patients who are at risk of complications due to malalignment or those who are likely to benefit from a particular alignment concept.

Relationship Between Coronal Plane Alignment of the Knee Phenotypes and Distal Femoral Rotation

Background: The coronal plane alignment of the knee (CPAK) classification categorises nine phenotypes based on constitutional limb alignment and joint line obliquity and can be used in healthy and arthritic knees. In total knee arthroplasty surgery, some morphological variables in planes other than the coronal plane are particularly interesting. One example is the distal femoral rotation. Our study aimed to search for relationships between phenotypes based on CPAK classification and distal femoral rotation. Methods: Data from 622 cases in 535 osteoarthritic patients who underwent primary total knee arthroplasty were retrospectively analysed. Computed tomography imaging was employed to ascertain the mechanical lateral distal femoral angle, the mechanical medial proximal tibial angle, and the distal femoral rotation (quantified using the condylar twist angle). Results: The variables were perfectly uncorrelated according to the regression equations, with a Coefficient of Determination of 0.0608 for the condylar twist angle. Upon visualising the condylar twist angle function using a contour map or surface curves with low interpolation, it became evident that the data did not follow any discernible pattern. Employing ANOVA, we found some statistically significant differences between the distributions of the CPAK groups for the condylar twist angle (F = 5.81; p < 0.001). Conclusions: Our study found no relevant relationships between coronal plane alignment, according to the CPAK classification, and the distal femoral rotation in the sample population studied. Perhaps the stratification of the CPAK groups (i.e., a purely arithmetical aspect) hides possible relationships between the coronal and the axial planes.

Number of conditioning trials, but not stimulus intensity, influences operant conditioning of brain responses after total knee arthroplasty

PURPOSE

The primary purpose of this randomized, cross-sectional study was to determine whether operant conditioning of motor evoked torque (MEPTORQUE) in individuals with total knee arthroplasty (TKA) increases quadriceps MEPTORQUE responses within a single session and induces acute corticospinal adaptations by producing sustained increases in MEPTORQUE after training. A secondary purpose was to determine if these changes were affected by the stimulus intensity and number of training trials.

METHODS

Thirty participants were block-randomized into one of three groups based on the participant's active motor threshold (100%, 120%, and 140%) to evaluate the effect of stimulus intensity. Participants received three blocks of conditioning trials (COND), where they trained to increase their MEPTORQUE. Control (CTRL) transcranial magnetic stimulation pulses were provided before and after each COND block to establish baseline corticospinal excitability and to evaluate the effect of the number of training trials. Two MEPTORQUE recruitment curves were collected to evaluate the effect of up-conditioning on acute corticospinal adaptations.

RESULTS

TKA participants were able to successfully increase their MEPTORQUE in a single session (F3,81 = 10.719, p < 0.001) and induce acute corticospinal adaptations (F1,27 = 20.029, p < 0.001), indicating sustained increases in quadriceps corticospinal excitability due to operant conditioning. While the stimulus intensity used during training did not affect the ability to increase MEPTORQUE (F2,26 = 0.021, n.s.) or its associated acute adaptations (F2,27 = 0.935, n.s.), the number of training trials significantly influenced these outcomes (F3,81 = 10.719, p < 0.001; F3,81 = 4.379, p = 0.007, respectively).

CONCLUSION

Operant conditioning is a feasible approach for improving quadriceps corticospinal excitability following TKA. While any of the three stimulus intensities evaluated in this study may be used in future operant conditioning interventions, using a low or moderate stimulus intensity and 150 training trials are recommended to improve treatment efficiency and patient adherence.

LEVEL OF EVIDENCE

Level II.

Functional preoperative assessment of coronal knee laxity better predicts postoperative patient outcomes than intraoperative surgeon-defined laxity in total knee arthroplasty

PURPOSE

Intraoperative laxity assessments in total knee arthroplasty (TKA) are subjective, with few studies comparing against standardised preoperative and postoperative assessments. This study compares coronal knee laxity in TKA patients awake and anaesthetised, preprosthesis and postprosthesis implantation, evaluating relationships to patient-reported outcome measures.

METHODS

A retrospective analysis of 49 TKA joints included preoperative and postoperative computed tomography scans, stress radiographs and knee injury and osteoarthritis outcome score (KOOS) questionnaire results preoperatively and 12 months postoperatively. The imaging was used to assess functional laxity (FL) in awake patients, whereas computer navigation measured intraoperative surgical laxity (SL) preimplantation and postimplantation, with patients anaesthetised. Varus and valgus stress states and their difference, joint laxity, were measured.

RESULTS

SL was greater than FL in both preimplantation [8.1° (interquartile range, IQR 2.0°) and 3.8° (IQR 2.9°), respectively] and postimplantation [3.5° (IQR 2.3°) and 2.5° (IQR 2.7°), respectively]. Preimplantation, SL was more likely than FL to categorise knees as correctable to ±3° of the mechanical axis. Preoperative FL correlated with KOOS Symptoms (r = 0.33, p = .02) and quality of life (QOL) (r = 0.38, p = .01), whereas reducing medial laxity with TKA enhanced postoperative QOL outcomes (p = .02).

CONCLUSIONS

Functional coronal knee laxity assessment of awake patients is generally lower than intraoperative surgical assessments of anaesthetised patients. Preoperative SL may result in overcorrection of coronal TKA alignment, whereas preoperative FL better predicts postoperative patient outcomes and reflects the patients' native and tolerable knee laxity. Preoperative FL assessment can be used to guide surgical planning.

LEVEL OF EVIDENCE

Level II.

Kinematic alignment adequately restores trochlear anatomy, patellar kinematics and kinetics in total knee arthroplasty: A systematic review

PURPOSE

Patellofemoral pain, maltracking and instability remain common and challenging complications after total knee arthroplasty. Controversy exists regarding the effect of kinematic alignment on the patellofemoral joint, as it generally leads to more femoral component valgus and internal rotation compared to mechanical alignment. The aim of this systematic review is to thoroughly examine the influence of kinematic alignment on the third space.

METHODS

A systematic search of the Pubmed, Cochrane and Web of Science databases was performed to screen for relevant articles published before 7 April 2024. This led to the final inclusion of 42 articles: 2 cadaveric, 9 radiographic, 12 computer simulation and 19 clinical studies. The risk of bias was evaluated with the risk of bias in non-randomised studies - of interventions tool as the lowest level of evidence of the included clinical studies was IV. The effects of kinematic alignment on patellar kinematics and kinetics, trochlear anatomy reconstruction and patellofemoral complication rate were investigated.

RESULTS

Kinematic alignment closely restores native patellar kinematics and kinetics, better reproduces native trochlear anatomy than mechanical alignment and leads to a 0%-11.4% incidence of patellofemoral complications. A more valgus joint line of the distal femur can cause lateral trochlear undercoverage and a trochlear angle orientation medial to the quadriceps vector when applying kinematic alignment, both of which can be solved by using an adjusted design with a 20.5° valgus trochlea.

CONCLUSION

Kinematic alignment appears to be a safe strategy for the patellofemoral joint in most knees, provided that certain precautions are taken to minimize the risk of complications.

LEVEL OF EVIDENCE

Level IV clinical studies, in vitro research.

Favourable clinical outcomes and low revision rate after M-ACI in adolescents with immature cartilage compared to adult controls: Results at 10 years

PURPOSE

The purpose of this study was to evaluate long-term survival, patient-reported outcomes (PROs) and radiographic results of matrix-associated autologous chondrocyte implantation (M-ACI) in adolescents with immature cartilage and compare them to adult controls.

METHODS

A retrospective matched-pair analysis was performed comparing the PRO after M-ACI for focal cartilage defect of the knee in cartilaginous immature adolescents to mature adults. Groups were matched for sex, body mass index, defect site and size, symptom duration and the number of previous knee surgeries. Knee Injury and Osteoarthritis Outcome Score (KOOS) and the Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART 2.0) scores were assessed at least 60 months postoperatively. Patient acceptable symptomatic state (PASS) and clinical response rate in KOOS and KOOS subscores were calculated.

RESULTS

A total of 54 patients were matched. At a mean of 96 months (65-144 months), no surgical complications, graft hypertrophy or reoperations were noted in the cohorts studied. Adolescents showed superior PROs at the final follow-up (76.9 ± 14.1 vs. 66.4 ± 15.0, p = 0.03) and were significantly more likely to achieve PASS (74.1% vs. 55.6%; p = 0.02) compared to the adult cohort. The KOOS subscale analysis showed long-term benefits for adolescents in terms of symptom improvement, pain reduction, activities of daily living, sports and quality of life (p < 0.05). None of the patients in the adolescent group showed graft hypertrophy on magnet resonance imaging or signs of osteoarthritis on radiographs at long-term follow-ups.

CONCLUSIONS

M-ACI is an effective treatment for chondral defects of the knee in patients with immature cartilage with low revision rates and high patient satisfaction over the long term. Adolescents showed comparable clinical and radiographic results in the short and medium term, with slightly more favourable, clinically relevant functional results in adolescents in the long term. M-ACI can be safely used in adolescents, and consideration should be given to expanding the indication to include these patients.

LEVEL OF EVIDENCE

Level III.

Intraoperative lateral laxity greater than 4° is associated with inferior functional improvement in posterior-stabilised total knee arthroplasty

PURPOSE

The study aimed to determine the impact of intraoperative lateral laxity at extension on clinical and functional outcomes 1 year after posterior-stabilised total knee arthroplasty (PS-TKA).

METHODS

In total, 91 varus-type osteoarthritic knees that underwent PS-TKA using the medial preservation gap technique were included. After the femoral trial component placement and patellofemoral joint reduction, the soft-tissue balance was assessed using an offset-type tensor with a 40-lb joint-distraction force. Patients were divided into the following three groups according to the intraoperative lateral laxity at extension (i.e., varus ligament balance) using the mean ± 1 standard deviation: Groups A, ≤0°; B, 0-4°; and C, >4°. The 2011 Knee Society Score (KSS) and 3-m timed up-and-go test (TUG) time 1-year postoperatively, and their improvements were compared among the groups.

RESULTS

While significant improvements were observed in all subscales of the 2011 KSS and TUG post-TKA (p < 0.05), the improvement of functional activities and TUG time were significantly lower in Group C than in Group B (p < 0.05). However, no significant differences were observed in symptom improvement, patient satisfaction or patient expectation scores among the groups.

CONCLUSION

An excessive lateral laxity (varus angle) >4° at extension was associated with lower improvement in functional ability 1-year postoperatively. Therefore, excessive intraoperative lateral laxity should be avoided in PS-TKA.

LEVEL OF EVIDENCE

Level IV.

Kinematical alignment better restores native patellar tracking pattern than mechanical alignment

PURPOSE

The purpose of this study was to assess whether kinematic alignment (KA) outperforms mechanical alignment (MA) in restoring patellar tracking to native patterns by using a clustering algorithm.

METHODS

Twenty cadavers (40 knees) were evaluated. For each cadaver, one knee was randomly assigned to KA and the other to MA. KA total knee arthroplasty (TKA) procedures were performed using a caliper-verified technique, while MA TKA procedures utilized a measured resection technique. Subsequently, all specimens were mounted on a customized knee-testing system, and patellar tracking was measured using a motion analysis system. All patellar tracking data were clustered using the density-based spatial clustering of applications with noise algorithm. Differences in patellar tracking patterns and the restoration of native patellar tracking were compared between the two alignment strategies.

RESULTS

Patellar tracking patterns following KA were considerably different from MA. Pre- and post-TKA patellar tracking patterns following MA were grouped into separate clusters, whereas a substantial proportion of patellar tracking patterns following KA were grouped into the pre-TKA dominant cluster. Compared to MA, a greater proportion of patellar tracking patterns following KA showed similar patterns to native knees (p < 0.05) and more patellar tracking patterns following KA paired with preoperative patterns (p < 0.01).

CONCLUSION

KA restored native patellar tracking patterns more closely compared to MA.

LEVEL OF EVIDENCE

Level I, therapeutic study.

Mechanically aligned total knee arthroplasty does not yield uniform outcomes across all coronal plane alignment of the knee (CPAK) phenotypes

PURPOSE

Patient dissatisfaction rates following total knee arthroplasty (TKA) reported in the literature reach 20%. The optimal coronal alignment is still under debate. The aim of this retrospective study was to compare clinical outcomes in different coronal plane alignment of the knee (CPAK) phenotypes undergoing mechanically aligned (MA) TKA. The hypothesis was that knees with preoperative varus arithmetic hip-knee-ankle angle (aHKA) would achieve inferior clinical outcomes after surgery compared to other aHKA categories. Additionally, another objective was to assess CPAK phenotypes distribution in the study population.

METHODS

A retrospective selection was made of 180 patients who underwent MA TKA from April 2021 to December 2022, with a 1-year follow-up. Coronal knee alignment was classified according to the CPAK classification. Clinical outcome evaluations were measured using the Knee Society Score (KSS), Oxford Knee Score (OKS), Short Form Survey 12 and Forgotten Joint Score (FJS). Differences in clinical outcomes were considered statistically significant with a p value <0 .05.

RESULTS

Patients with varus aHKA achieved significantly inferior outcomes at final follow-up compared to other aHKA categories in KSS pt. 1 (79.7 ± 17.2 vs. 85.6 ± 14.7; p = 0.028), OKS (39.2 ± 9.2 vs. 42.2 ± 7.2; p = 0.019) and FJS (75.4 ± 31.0 vs. 87.4 ± 22.9; p =0 .003). The most common aHKA category was the varus category (39%). The most common CPAK phenotypes were apex distal Types I (23.9%), II (22.8%) and III (13.3%).

CONCLUSION

MA TKA does not yield uniform outcomes across all CPAK phenotypes. Varus aHKA category shows significantly inferior results at final follow-up. The most prevalent CPAK categories are varus aHKA and apex distal JLO, with phenotypes I, II and III being the most common. However, their gender distribution varies significantly.

LEVEL OF EVIDENCE

Level IV.

Effect of joint-line obliquity on long-term survivorship of total knee arthroplasty: A postoperative phenotype analysis

PURPOSE

Whether the longevity of total knee arthroplasty (TKA) differs between postoperative phenotypes has not been investigated. This study aims to examine which phenotype has a worse long-term survival rate than the reference phenotype (neutral alignment-parallel joint line), and whether joint-line obliquity (JLO) affects the survivorship of TKA.

METHODS

A total of 945 knees that underwent primary TKAs for primary osteoarthritis from January 2000 to January 2009 were included. These were classified into nine postoperative phenotypes based on the combined assessment of the hip-knee-ankle (HKA) angle and JLO, measured on standing radiographs. The 5-, 10- and 15-year survival rates were analysed using Kaplan-Meier methods and log-rank tests. The long-term survival rates of each phenotype were compared with the reference phenotype.

RESULTS

There were 55 aseptic mechanical failures within a period of 10.4 ± 5.0 years. The most frequently observed phenotypes were the reference phenotype (n = 527), neutral alignment-lateral joint-line inclination (n = 162), varus alignment-lateral joint-line inclination (n = 104) and varus alignment-parallel joint line (n = 101). The overall failure rate for each phenotype was 3.6%, 3.7%, 18.3% and 7.9%, respectively. Only the 10- and 15-year survival rates of the varus alignment-lateral joint-line inclination phenotype were significantly different from those of the reference phenotype (97%-93% vs. 90%-69%; p = 0.017, <0.001).

CONCLUSION

The lateral joint-line inclination phenotype had an inferior long-term survival rate after varus-aligned TKA. This suggested that alignment and JLO affected the long-term survival rate of patients who underwent TKA.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Inverse kinematic total knee arthroplasty using conventional instrumentation restores constitutional coronal alignment

PURPOSE

Restricted inverse kinematic alignment (iKA) is a contemporary alignment strategy for total knee arthroplasty (TKA), commonly performed with robotic assistance. While superior clinical results are reported for kinematic-type alignment strategies, registry data indicate no survivorship benefit for navigation or robotic assistance. This study aimed to determine the efficacy of an instrumented, restricted iKA technique for achieving patient-specific alignment.

METHODS

Seventy-nine patients undergoing 84 TKAs (five bilateral procedures) using an iKA technique were included for preoperative and postoperative lower limb alignment analysis. The mean age was 66.5 (range: 43-82) with 33 male and 51 female patients. Artificial intelligence was employed for radiographic measurements. Alignment profiles were classified using the Coronal Plane Alignment of the Knee (CPAK) system. Preoperative and postoperative alignment profiles were compared with subanalyses for preoperative valgus, neutral and varus profiles.

RESULTS

The mean joint-line convergence angle (JLCA) reduced from 2.5° to -0.1° postoperatively. The mean lateral distal femoral angle (LDFA) remained unchanged postoperatively, while the mean medial proximal tibial angle (MPTA) increased by 2.5° (p = 0.001). By preservation of the LDFA and restoration of the MPTA, the mean hip knee ankle angle (HKA) moved through 3.5° varus to 1.2° valgus. The CPAK system was used to visually depict changes in alignment profiles for preoperative valgus, neutral and varus knees; with 63% of patients observing an interval change in classification.

CONCLUSION

Encouraged by the latest evidence supporting both conventional instrumentation and kinematic-type TKA strategies, this study describes how a restricted, conventionally instrumented iKA technique may be utilised to restore constitutional lower limb alignment.

LEVEL OF EVIDENCE

Level III.

Large angular correction of arithmetic coronal alignment is associated with residual lateral laxity after total knee arthroplasty in varus knees for Japanese patients

Purpose

One of the most common types of coronal plane alignment of the knee (CPAK) is type I, which is characterised by varus alignment and apex distal joint line obliquity. The purpose of this study was to evaluate the association of changes in arithmetic hip-knee-ankle angle (aHKA) with both postoperative joint laxity and patient-reported outcome measures (PROMs) in patients with CPAK type I following mechanical alignment (MA) total knee arthroplasty (TKA).

Methods

Of 111 consecutive knees in 92 patients with osteoarthritis who underwent primary TKA, 80 knees (72.0%) with CPAK type I phenotype preoperatively were evaluated. All TKAs were performed to achieve neutral MA by a medial stabilising gap balancing technique. Pre- to postoperative change in aHKA was defined as ΔaHKA. The 80 CPAK type I knees were divided into a larger ΔaHKA group (>7°) and a smaller ΔaHKA group (≤7°). PROMs, including the Knee Society Score and Forgotten Joint Score-12, were assessed before and 2 years after surgery. Pre- and postoperative joint laxity was assessed using a Telos arthrometer.

Results

Twenty-two knees showed a larger ΔaHKA, and postoperative lateral joint laxity in varus stress was significantly greater in these patients than in those with a smaller ΔaHKA (6.8° vs. 4.5°, p = 0.006). There were no significant differences between the groups in PROMs (p = n.s.).

Conclusions

Postoperative lateral laxity was associated with larger aHKA changes than smaller aHKA changes in CPAK type I knees after TKA. However, no statistically significant differences in PROMs were found according to the amount of change in aHKA.

Level of Evidence

Level III.

Better clinical outcomes and return to sport rates with additional medial meniscus root tear repair in high tibial osteotomy for medial compartmental knee osteoarthritis

PURPOSE

This retrospective study aimed to investigate whether the repair of medial meniscus posterior root tears (MMPRTs) is effective for improving clinical outcomes and return to sports rates in young patients (50 years old or younger) with medial compartment knee osteoarthritis (KOA) and MMPRTs.

METHODS

Between 2016 and 2019, 153 patients with KOA and MMPRTs who underwent open-wedge high tibial osteotomy (OWHTO) were retrospectively included. The patients were divided into OWHTO combined with MMPRT repair (n = 73) and isolated OWHTO (n = 80) groups. Lysholm scores, Hospital for Special Surgery (HHS) scores, Tegner scores, flexion contracture, range of knee flexion, return to sports rates and postoperative complications were compared. Radiological outcomes, including hip-knee-ankle angle (HKA), medial proximal tibial angle (MPTA), joint line convergence angle (JLCA) and Kellgren-Lawrence (K-L) grade, were compared between the two groups.

RESULTS

After a mean follow-up of 30.1 ± 3.0 months, the OWHTO + Repair group observed better clinical outcomes compared with the OWHTO group (Lysholm score: 86.7 ± 7.4 vs. 81.6 ± 6.9, p = 0.023. HHS score: 85.4 ± 8.20 vs. 80.5 ± 7.1, p = 0.039). The OWHTO + Repair group had higher Tegner scores and return to sports rates than the OWHTO group (Tegner score: 6 vs. 5, p = 0.020; return to sports rates: 38% vs. 15%, p = 0.001). No fracture or major complications occurred. Radiological outcomes showed no significant differences between the two groups (HKA: 181.1 ± 2.7 vs. 180.1 ± 1.5 n.s; MPTA: 90.1 ± 1.8 vs. 89.2 ± 1.4, n.s; JLCA:1.9 ± 0.7 vs. 2.1 ± 0.7, n.s).

CONCLUSIONS

Additional MMPRT repair during OWHTO was associated with better clinical outcomes and higher rates of return to sports in young patients with medial compartment KOA and MMPRTs.

LEVEL OF EVIDENCE

Level III.

Association between three-dimensional gait kinematics and joint-line inclination in osteoarthritic knees compared with normal knees: An epidemiological study

Purpose

No report has proven how tibial and femoral joint-line inclinations affect thigh and shank motion, respectively, according to Kellgren-Lawrence grade in motion analysis with a sufficient sample size. Therefore, this study aimed to evaluate the motion of the thigh and shank individually from the ground and the relative motion between bones in a large-sample motion analysis to determine the differences between normal and osteoarthritic knees and examine the effects of tibial and femoral joint-line inclination on motion according to osteoarthritis (OA) grade.

Methods

Of 459 participants with healthy knees and varus knee OA undergoing three-dimensional gait analysis, 383 (218 females and 165 males) with an average age of 68 ± 13 years were selected. Gait analysis was performed using a motion-capture system. The six degrees of freedom motion parameters of the knee in the Grood and world coordinate systems and the joint-line inclination in the standing radiographs were measured.

Results

Osteoarthritic knees demonstrated a relative motion different from that of normal knees, with responsibility for the thigh in the sagittal and rotational planes and the thigh and shank in the coronal plane. The involvement of joint-line inclination in motion was mainly on the tibial side, and the effect was minimal in normal knees.

Conclusions

The details of the relative motion of both the thigh and shank can be clarified by analysing individual motions to determine the responsible part. The tibial joint-line affected knee motion: however, the effect was minimal in normal knees. This finding implies that if physical ability can be improved, the negative effects of deformity in osteoarthritic knees may be compensated for.

Level of Evidence

Level Ⅱ.

Effects of three-dimensional femur and tibia postures on the parameters of standing long-leg radiographs for osteoarthritic knees in elderly female subjects

BACKGROUND

Long-leg frontal radiographs of the lower extremities are used to assess knee osteoarthritis. Given the three-dimensional (3D) nature of alignment changes in osteoarthritis, postural alterations in the femur and tibia extend beyond the coronal plane (in-plane) to include the transverse and sagittal planes (out-of-plane). This study investigates the impact of these out-of-plane factors on in-plane knee alignment parameters observed in frontal radiographs.

METHODS

A total of 97 osteoarthritic knees in women were examined. Using a 3D-to-two-dimensional (2D) image matching technique, we evaluated the 3D postures of the femur and tibia in the standing position as viewed from frontal radiographs in the world coordinate system. Statistical analyses were conducted to explore associations between these 3D postures and 2D alignment parameters obtained from frontal radiographs under identical conditions.

FINDINGS

The femur exhibited a medial inclination of 2.7°, a posterior inclination of 3.9°, and an internal rotation of 4.2°, whereas the tibia showed a lateral inclination of 6.4°, an anterior inclination of 6.7°, and an internal rotation of 6.7°. Both coronal and rotational postures of femur and tibia influenced the hip-knee-ankle angle, mechanical axis percentage, and medial proximal tibial angle. However, only coronal factors of tibia impacted tibial joint line obliquity relative to the floor.

INTERPRETATION

Attention should be paid to the potential impact of the out-of-plane postures of the femur and tibia on parameters assessed in plain frontal radiographs of the lower extremities.

Conventionally instrumented inverse kinematic alignment for total knee arthroplasty: How is it done?

Purpose

For primary total knee arthroplasty (TKA), there is an increasing trend towards patient-specific alignment strategies such as kinematic alignment (KA) and inverse kinematic alignment (iKA), which by restoring native joint mechanics may yield higher patient satisfaction rates. Second, the most recent Australian joint registry report describes favourable revision rates for conventionally instrumented TKA compared to technology-assisted techniques such as those using navigation, robotics or custom-cutting blocks. The aim of this technique article is to describe in detail a surgical technique for TKA that: (1) utilises the principles of iKA and (2) uses conventionally instrumented guided resections thereby avoiding the use of navigation, robotics or custom blocks.

Methods

A TKA technique is described, whereby inverse kinematic principles are utilised and patient-specific alignment is achieved. Additionally, the patellofemoral compartment of the knee is restored to the native patellofemoral joint line. The sequenced technical note provided may be utilised for cemented or cementless components; cruciate retaining or sacrificing designs and for fixed or rotating platforms.

Results

An uncomplicated, robust and reproducible technique for TKA is described.

Discussion

Knee arthroplasty surgeons may wish to harness the emerging benefits of both a conventionally instrumented technique and a patient-specific alignment strategy.

Level of Evidence

Level V.

Knees with isolated lateral compartment osteoarthritis show a substantial variability in functional knee phenotypes with demographic-specific variations: Phenotypic analysis of 305 knees

BACKGROUND

The primary aim of this study was to assess and describe the phenotypic variation in the coronal plane of knees affected by isolated lateral compartment osteoarthritis (OA). The secondary aim was to investigate the potential gender-specific and age-related differences in functional knee phenotypes among knees with isolated lateral compartment OA.

METHODS

A comprehensive classification system was used to categorize 305 knees with isolated lateral compartment OA based on their mechanical hip-knee-ankle angle (HKA), femoral mechanical angle (FMA), and tibial mechanical angle (TMA). The phenotypic variation of functional knee phenotypes was assessed for the entire cohort and stratified by gender and age category.

RESULTS

Among knees with isolated lateral compartment OA, a total of 60 distinct functional knee phenotypes were identified, with phenotype VALHKA6°NEUFMA0°VALTMA3° being the most prevalent (10.8 %). Gender-specific differences were evident, with females exhibiting significantly greater valgus alignment in both mean HKA and TMA values compared with males (HKA: -6.4° vs. -5.4°, respectively; P = 0.02 and TMA 94.4° vs. 89.0°, respectively; P = 0.005). Age-related variations included younger patients predominantly displaying femoral deformities, while older patients primarily exhibited isolated tibial- or combined femoral and tibial deformities.

CONCLUSIONS

There is a broad variation of functional knee phenotypes among knees affected by isolated lateral compartment OA, with gender-specific and age-related differences. Recognizing this inherent phenotypic diversity during preoperative planning may facilitate the implementation of tailored approaches that account for the unique characteristics and bony deformities of the individual knee.

Functional knee phenotypes appear to be more suitable for the Chinese OA population compared with CPAK classification: A study based on 3D CT reconstruction models

PURPOSE

The aim of this study was to investigate the distribution of coronal plane alignment of the knee (CPAK) classification and functional knee phenotypes in a Chinese osteoarthritis (OA) population and to compare different lower limb alignment targets according to the distribution characteristics to find suitable total knee arthroplasty (TKA) bone cut strategies for the Chinese OA patients.

METHODS

The computed tomography (CT) images were retrospectively collected and the three-dimensional (3D) models were reconstructed from 434 Chinese OA patients, including 93 males and 341 females, with a mean age of 66.4 ± 9.3 years. Femoral mechanical angle (FMA), tibial mechanical angle (TMA) and mechanical hip-knee-ankle angle (mHKA) were measured on the 3D models. Arithmetic hip-knee-ankle angle (aHKA) was calculated using FMA plus TMA, and joint line obliquity was calculated as 180 + TMA-FMA. The CPAK according to MacDessi and the functional knee phenotypes according to Hirschmann were performed. In addition, the suitable TKA bone cut strategies were explored according to the phenotypes and based on the characteristics of different alignment targets, such as mechanical alignment, anatomic alignment (AA), kinematic alignment, restricted KA (rKA) and adjusted MA (aMA). Statistical differences were determined using the independent-samples t-test or the two independent-samples Wilcoxon test, with p < 0.05 considered statistically significant.

RESULTS

The Chinese OA population showed a varus alignment tendency (mHKA = 172.1° ± 7.2°), to which the TMA was a major contributor (TMA = 84.7° ± 4.4° vs. FMA = 91.3° ± 3.2°). The mHKA was on average 3.9° more varus than the aHKA. A total of 140 functional knee phenotypes were found and 45.6% were concentrated in VARFMA3°-NEUFMA0° to VARTMA3°-NEUTMA0°. More than 70% of patients had different FMA and TMA phenotypes. There were 92.9% of CPAK distributed in types I to IV, with type I accounting for 53.9%. The FMA phenotypes were less changed if the aMA and rKA were chosen, and the TMA phenotypes were less changed if the AA and rKA were chosen.

CONCLUSION

Compared with the CPAK, the functional knee phenotypes were more suitable for the Chinese OA population with a wide distribution and a varus tendency, and it seemed more appropriate to choose aMA and rKA as TKA alignment targets for resection.

LEVEL OF EVIDENCE

Level Ⅲ.

Tibia-first, gap-balanced patient-specific alignment restores bony phenotypes and joint line obliquity in a great majority of varus and straight knees and normalises valgus and severe varus deformities

PURPOSE

The present study focuses on testing the capability of a restricted tibia-first, gap-balanced patient-specific alignment technique (PSA) to restore bony morphology and phenotypes.

METHODS

Three-hundred and sixty-seven patients were treated with navigated total knee arthroplasty and tibia-first gap-balanced PSA technique. Boundaries for medial proximal tibial angle were 86°-92°, mechanical lateral distal femoral angle 86°-92°, and hip-knee-ankle angle 175°-183°. Knees were classified by coronal plane alignment of the knee (CPAK), with subsequent analyses comparing pre- and postoperative distributions. Phenotype classification within CPAK groups assessed pre- and postoperative distributions.

RESULTS

Preoperatively, the largest CPAK group was type II (30.8%), followed by type I (20.5%) and type V (17.8%). Postoperatively, type II remained the largest group (39%), followed by type V (30%). All groups with varus/valgus deformities (I, III, IV and VI) became smaller. While in straight legs (II, IV), the CPAK was restored in more than 70%-75%, in varus groups (I, IV) in 40%-50% and in valgus (III and VI) in 5%-18%. The joint line obliquity remained the same in the majority of knees (straight >75%; varus 63%-80%; valgus VI 95%), with the exception of CPAK III (40%). The phenotype analysis showed for straight legs a phenotype restoration of 85%, for varus 94% and for valgus 37%. Joint line convergence angle was reduced significantly in all groups from 1.8°-4.3° preoperatively to 0.6°-1.2° postoperatively.

CONCLUSION

PSA restores bony phenotypes and joint line obliquity in the majority of straight and varus knees, while most of the valgus and extreme varus knees are normalised.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Constitutional varus knee due to tibial deformity is common and represents a good indication for high tibial osteotomy in Japanese population: Consideration of 1010 knees

PURPOSE

This study aimed to elucidate the characteristics of varus knee deformities in the Japanese population, prevalence of various around knee osteotomy procedures and influence of femoral and tibial bowing.

METHODS

Varus knee deformity was defined as a weight-bearing line ratio of <50%. A total of 1010 varus knees were selected from 1814 varus knees with weight-bearing full-length radiographs, obtained at two facilities, based on exclusion criteria. Various parameters were measured, and around knee osteotomy simulations based on the deformity centre were conducted using digital planning tools. Bowing of the femoral and tibial shafts was measured, with bowing defined as follows: ≤ -0.6° indicating lateral bowing and ≥ 0.6° indicating medial bowing. Statistical analysis was performed to investigate age-related correlations and their impact on surgical techniques.

RESULTS

The study revealed that the proximal tibia was the centre of deformity in Japanese varus knees (42.8%), and high tibial osteotomy was frequently indicated (81.6%). Age demonstrated a mild correlation with femoral shaft bowing (r = -0.29), leading to an increase in the mechanical lateral distal femoral angle and to a decrease in the hip-knee-ankle angle and weight-bearing line ratio (r = -0.29, 0.221, 0.219). The tibial shaft bowing was unaffected by age (r = -0.022).

CONCLUSION

A significant proportion of Japanese individuals with varus knees exhibit a deformity centre located in the proximal tibia, making them suitable candidates for high tibial osteotomy. No age-related alterations were discerned in tibial morphology, indicating that the occurrence of constitutional varus knees is attributable to tibial deformities in the Japanese patient cohort.

LEVEL OF EVIDENCE

Level IV.

Higher satisfaction and function scores in restricted kinematic alignment versus mechanical alignment with medial pivot design total knee arthroplasty: A prospective randomised controlled trial

PURPOSE

Restricted kinematic alignment (rKA) in total knee arthroplasty (TKA) and medial pivot (MP) knee designs already showed superior outcomes in independent comparative studies. The objective of this study was to assess whether rKA with MP TKA provides better clinical and functional outcomes compared to mechanical alignment (MA) with MP TKA.

METHODS

This is a randomised, parallel two group study involving a total of 98 patients with end-stage knee osteoarthritis. Patients were randomly allocated to either rKA or MA TKA procedures conducted with a MP prothesis using patient-specific instruments between 2017 and 2020. Final follow-up was at 2 years postoperatively. Demographic data and clinical and functional scores (Oxford knee score, knee society score [KSS], Western Ontario and McMaster Universities Osteoarthritis Index [WOMAC], forgotten joint score [FJS]) were collected and compared preoperative, 1 year postoperative and 2 years postoperative. Coronal plane alignment of the knee and functional knee phenotype classification were recorded.

RESULTS

A total of 47 patients (rKA) and 51 patients (MA) were included in final analysis. Superior joint awareness scores (FJS) were found at 1 year postoperative for rKA (62.2 vs. 52.4, p = 0.04). KSS subscores (expectation score, satisfaction score) improved with rKA with significant differences at both 1 and 2 years postoperatively. Major differences between rKA and MA were found in subgroup analysis of varus and neutral CPAK phenotypes. Both 1 year and 2 years postoperatively, FJS was significantly better in KA compared with MA in varus CPAK phenotypes (63.1 vs. 44.9, p = 0.03; 71.1 vs. 46.0, p = 0.005). Further clinical and functional scores showed improvement in the varus CPAK phenotypes with predominantly significant improvement in the expectation and satisfaction KSS subscores. No significant differences were found in the comparison of rKA and MA in neutral CPAK phenotypes.

CONCLUSION

The rKA of MP TKA design shows superior patient satisfaction and self-reported function when compared to MA MP TKA. Furthermore, rKA MP TKA shows superior joint awareness at early postoperative stage. The most important clinical relevance of this study is the clear superiority of rKA in varus phenotypes.

LEVEL OF EVIDENCE

Level II.

Small medial proximal tibial angle is a radiographic finding strongly associated with less coronal alignment correction under valgus stress in medial knee osteoarthritis

PURPOSE

The degree to which varus knees can be corrected manually is important when considering total versus unicompartmental knee arthroplasty (UKA). The primary aim was to clarify the relationship between the degree of coronal alignment correction and radiographic parameters involved in UKA prognosis using preoperative full-length lower extremity valgus stress radiography. The secondary aim was to identify the factors affecting alignment correction.

METHODS

This retrospective observational study included 115 knees with medial osteoarthritis that underwent knee osteotomy or arthroplasty. Percent mechanical axis without valgus stress (%MA: neutral, 50%; varus, <50% and valgus, >50%), mechanical lateral distal femoral angle, lateral bowing femoral angle, medial proximal tibial angle (MPTA), joint line convergence angle, medial and lateral joint space width (LJSW) and medial femoral and tibial joint osteophyte size were measured using preoperative full-length weight-bearing radiographs. Correlation and multiple linear regression analyses were used to assess associations between parameters and %MA with valgus stress or amount of %MA change (%MA with valgus stress minus %MA without valgus stress).

RESULTS

%MA with valgus stress was correlated with all radiographic parameters. %MA change was correlated with parameters except for MPTA and LJSW. Multiple regression analyses showed that %MA without valgus stress and MPTA were associated with both %MA with valgus stress and %MA change. When %MA with valgus stress was set at 30%, 40% and 50%, MPTA cutoff values were 81.6°, 83.5° and 84.9°, and cutoffs for %MA without valgus stress were 10.7%, 17.1% and 25.1%, respectively.

CONCLUSION

Small MPTA is strongly associated with less alignment correction under valgus stress in varus knees. The finding is useful in surgical planning, especially to avoid undercorrection with UKA when valgus stress radiographs are unavailable.

LEVEL OF EVIDENCE

Level III.

Only 26% of Native Knees Show an Identical Coronal Functional Knee Phenotype in the Contralateral Knee

BACKGROUND

A comprehensive exploration evaluating left-to-right knee symmetry across all anatomical planes utilizing three-dimensional (3D) scans stands absent from the existing body of research. Therefore, the primary objectives of this investigation involved examining potential differences and resemblances in alignment and structure between left and right non-osteoarthritic (native) knees in various planes (coronal, sagittal, and axial) using three-dimensional single-photon emission computed tomography/computed tomography (SPECT/CT) images.

METHODS

A total of 282 native knees from 141 patients were retrospectively gathered from the hospital's records. Patients, aged between 16 and 45, who underwent Tc99m-methyl diphosphonate SPECT/CT scans for both knees, adhering to the Imperial Knee Protocol, were included. A statistical analysis was conducted, including 23 knee morphometric parameters, comparing left and right knees, and classifying them based on functional knee phenotypes across the coronal, sagittal, and axial planes.

RESULTS

Regarding the functional coronal knee phenotype, 26% of patients (n = 37) exhibited identical phenotypes in both knees (p < 0.001). Significant correlated similarities between the left and right knees were observed in the coronal plane (Pearson's r = 0.76, 0.68, 0.76, 0.76, p < 0.001) and in several morphometric measures in the sagittal plane (Pearson's r = 0.92, 0.72, 0.64, p < 0.001). Moderately correlated similarities were noted in the axial plane (Pearson's r = 0.43, 0.44, 0.43, p < 0.001).

CONCLUSIONS

Only 26% of native knees exhibit an identical coronal phenotype in their contralateral knee, whereas 67% have the adjacent coronal phenotype. Strongly correlated resemblances were established across various left and right knee morphometric parameters in the coronal, sagittal, and axial planes. These findings could enhance decisions in procedures like total knee arthroplasties or osteotomies, where alignment is key to outcomes, and reveal a potential for future artificial intelligence-driven models to improve our understanding and improve personalized treatment strategies for knee osteoarthritis.

Large multiplanar changes to native alignment have no apparent impact on clinical outcomes following total knee arthroplasty

PURPOSE

This study sought to examine if achieved postoperative alignment when compared to the native anatomy would lead to a difference in Patient Reported Outcome Measures (PROMs), and whether the achieved alignment could be broadly categorised by an accepted alignment strategy.

METHODS

A retrospective cohort study of prospectively collected data on patients undergoing single primary or bilateral simultaneous total knee arthroplasty (TKA) was carried out. CT scans were used to determine the mean change ("delta values") between the pre and postoperative; hip-knee-ankle angle, lateral distal femoral angle, medial proximal tibial angle and femoral implant rotation. Femoral implant flexion and tibial implant slope were measured postoperatively. The primary outcome was the relationship of the variables to the change in KOOS pain subscale after one year. The secondary outcome was the number of knees which could be categorised postoperatively to an alignment strategy, and the mean PROMs in each cohort.

RESULTS

A total of 296 knees in 261 patients were available for analysis. With regards to the primary outcome, the delta values for each variable did not demonstrate any association with the change in knee injury and osteoarthritis outcome score (KOOS) pain score. Approximately 46% of knees could not be categorised to an alignment strategy based on postoperatively measured alignment, with no significant difference between each cohort with regards to the change in KOOS Pain score.

CONCLUSION

Achieved alignment does not consistently match accepted alignment strategies, and appears to confer no benefit to clinical outcomes when the native anatomy is most closely approximated, nor results in poorer outcomes in outliers. This study highlights the importance of routine three dimensional pre and postoperative imaging in clinical practice and for the valid analysis of outcomes in studies on alignment.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Definition of normal, neutral, deviant and aberrant coronal knee alignment for total knee arthroplasty

PURPOSE

One of the most pertinent questions in total knee arthroplasty (TKA) is: what could be considered normal coronal alignment? This study aims to define normal, neutral, deviant and aberrant coronal alignment using large data from a computed tomography (CT)-scan database and previously published phenotypes.

METHODS

Coronal alignment parameters from 11,191 knee osteoarthritis (OA) patients were measured based on three dimensional reconstructed CT data using a validated planning software. Based on these measurements, patients' coronal alignment was phenotyped according to the functional knee phenotype concept. These phenotypes represent an alignment variation of the overall hip knee ankle angle (HKA), femoral mechanical angle (FMA) and tibial mechanical angle (TMA). Each phenotype is defined by a specific mean and covers a range of ±1.5° from this mean. Coronal alignment is classified as normal, neutral, deviant and aberrant based on distribution frequency. Mean values and distribution among the phenotypes are presented and compared between two populations (OA patients in this study and non-OA patients from a previously published study).

RESULTS

The arithmetic HKA (aHKA), combined normalised data of FMA and TMA, showed that 36.0% of knees were neutral within ±1 SD from the mean in both angles, 44.3% had either a TMA or a FMA within ±1-2 SD (normally aligned), 15.3% of the patients were deviant within ±2-3 SD and only 4.4% of them had an aberrant alignment (±3-4 SD in 3.4% and >4 SD in 1.0% of the patients respectively). However, combining the normalised data of HKA, FMA and TMA, 15.4% of patients were neutral in all three angles, 39.7% were at least normal, 27.7% had at least one deviant angle and 17.2% had at least one aberrant angle. For HKA, the males exhibited 1° varus and females were neutral. For FMA, the females exhibited 0.7° more valgus in mean than males and grew 1.8° per category (males grew 2.1° per category). For TMA, the males exhibited 1.3° more varus than females and both grew 2.3° and 2.4° (females) per category. Normal coronal alignment was 179.2° ± 2.8-5.6° (males) and 180.5 > ± 2.8-5.6° (females) for HKA, 93.1 > ± 2.1-4.2° (males) and 93.8 > ± 1.8-3.6° (females) for FMA and 86.7 > ± 2.3-4.6° (males) and 88 > ± 2.4-4.8° (females) for TMA. This means HKA 6.4 varus or 4.8° valgus (males) or 5.1° varus to 6.1° valgus was considered normal. For FMA HKA 1.1 varus or 7.3° valgus (males) or 0.2° valgus to 7.4° valgus was considered normal. For TMA HKA 7.9 varus or 1.3° valgus (males) or 6.8° varus to 2.8° valgus was considered normal. Aberrant coronal alignment started from 179.2° ± 8.4° (males) and 180.5 > ± 8.4° (females) for HKA, 93.1 > ± 6.3° (males) 93.8 > ± 5.4° (females) for FMA and 86.7 > ± 6.9° (males) and 88 > ± 7.2° (females) for TMA. This means HKA > 9.2° varus or 7.6° valgus (males) or 7.9° varus to 8.9° valgus was considered aberrant.

CONCLUSION

Definitions of neutrality, normality, deviance as well as aberrance for coronal alignment in TKA were proposed in this study according to their distribution frequencies. This can be seen as an important first step towards a safe transition from the conventional one-size-fits-all to a more personalised coronal alignment target. There should be further definitions combining bony alignment, joint surfaces' morphology, soft tissue laxities and joint kinematics.

LEVEL OF EVIDENCE

III.

No differences in long-term clinical outcomes and survival rate of navigation-assisted versus conventional primary mobile-bearing total knee arthroplasty: A minimum 10-year follow-up

PURPOSE

This study aimed to compare long-term clinical and radiographic outcomes and survival rates between navigation-assisted (NAV) total knee arthroplasty (TKA) and conventional (CON) TKA using a mobile-bearing insert.

METHODS

From May 2008 to December 2009, 45 and 63 mobile-bearing TKA patients were enroled in the CON- and NAV-TKA groups with 146.8 months follow-up, respectively. Clinical outcomes (Western Ontario and McMaster University Osteoarthritis Index and Knee Society Scores), radiographic outcomes (hip-knee-ankle [HKA], lateral distal femoral, medial proximal tibial, γ, and δ angles), and survivorship were compared between both groups.

RESULTS

The number of HKA angle outliers (more than 3 degrees or less than -3 degree) was significantly lower in the NAV-TKA group (24.4% vs. 9.5%, p = 0.036) than in the CON-TKA group. However, long-term clinical outcomes were similar between both groups. The cumulative survival rate (best-case scenario) was 98.3% in the CON-TKA group and 97.5% in the NAV-TKA group, with no significant difference between the groups (p = 0.883).

CONCLUSION

Long-term clinical outcomes and survival rates were similar between the two groups despite fewer outliers of postoperative lower-limb alignment in the NAV-TKA group. Excellent survival rates were observed in both groups using mobile-bearing inserts.

LEVEL OF EVIDENCE

Level IV, case series.

The phenotypic diversity of anteromedial osteoarthritis before and after treatment with medial unicompartmental knee arthroplasty: A radiographic analysis of 1000 knees

PURPOSE

This study aimed to assess phenotypic variation in the coronal plane of knees with anteromedial osteoarthritis using the functional knee phenotype classification, before and after treatment with medial unicompartmental knee arthroplasty (UKA).

METHODS

The study comprised 1000 knees of 835 patients (45% females, 55% males, 90% Caucasian) who underwent medial UKA for anteromedial osteoarthritis. Pre and postoperative alignment was evaluated through the hip-knee-ankle angle (HKA), femoral mechanical angle (FMA), and tibial mechanical angle (TMA). Knees were classified according to the functional knee phenotype system which combines limb phenotype (HKA), and femoral and tibial knee phenotypes (FMA and TMA, respectively). Restoration of prearthritic coronal alignment following medial UKA was evaluated by phenotype.

RESULTS

Preoperatively, 76 distinct and 25 relevant (prevalence ≥1%) functional knee phenotypes were identified, of which VARHKA 6°VARFMA 3°NEUTMA 0° was the most common (9.4% of knees). The most prevalent limb phenotype, VARHKA 6°, comprised 15 distinct knee phenotypes (FMA and TMA combinations). Postoperatively, 58 distinct and 17 relevant functional knee phenotypes were observed, of which VARHKA 3°NEUFMA 0°NEUTMA 0° had the highest prevalence at 18.3%. Knees with combined tibial and femoral deformities were associated with a lower probability of restoration of prearthritic coronal alignment following medial UKA, compared to knees without extra-articular deformity, or knees with an isolated tibial or femoral deformity.

CONCLUSION

Phenotype analysis using the functional knee phenotype system demonstrated a wide diversity of coronal alignment phenotypes among knees with anteromedial osteoarthritis in a predominantly Caucasian population. Following medial UKA, a reduction from 25 preoperative to 17 postoperative relevant phenotypes was observed. Consideration of phenotypic variation can be of importance when aiming to restore prearthritic coronal alignment during medial UKA.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Restricted kinematically aligned total knee arthroplasty with an anatomically designed implant can restore constitutional coronal lower limb alignment

PURPOSE

Restricted kinematically aligned total knee arthroplasty (rKA-TKA) may not restore the constitutional varus alignment in most patients with knee osteoarthritis. This study aimed to investigate (1) the extent to which constitutional lower limb alignment can be restored by rKA-TKA using an anatomically designed implant and (2) which lower limb alignment parameters are associated with patient-reported outcome measures (PROMs).

METHODS

This study included 60 patients who underwent rKA-TKA using an anatomically designed implant. Radiographic alignment parameters, including mechanical lateral distal femoral angle (mLDFA), medial proximal tibial angle (MPTA), coronal hip-knee-ankle angle (HKA), coronal joint line obliquity (JLO), posterior tibial slope (PTS), single-leg standing knee flexion angle (KFA), sagittal JLO, and arithmetic HKA (aHKA), were evaluated preoperatively and postoperatively. The Western Ontario and McMaster Universities Arthritis Index (WOMAC) was used for clinical evaluation.

RESULTS

The mLDFA, MPTA, and aHKA showed no significant differences before and after surgery. Coronal HKA and PTS have significantly changed from 8.1 ± 8.7° and 9.9 ± 8.6° preoperatively to 3.5 ± 3.1° and 2.5 ± 2.0° postoperatively, respectively (p < 0.001 for each comparison). The postoperative WOMAC total score was significantly correlated with the KFA (r = 0.4063, p = 0.0034) and sagittal JLO (r = -0.3435, p = 0.0157). Postoperative KFA is a causal factor for the increased postoperative WOMAC total score (r = 1.416, 95% confidence interval: 0.491-2.342, p = 0.003).

CONCLUSION

rKA-TKA using an anatomically designed implant can restore constitutional coronal lower limb alignment, while postoperative KFA and sagittal JLO were associated with poor PROMs. Care should be taken for the postoperative KFA because it is a risk factor for poor PROMs.

LEVEL OF EVIDENCE

Level III, case-control study.

Distribution of coronal plane alignment of the knee classification does not change as knee osteoarthritis progresses: a longitudinal study from the Toei study

PURPOSE

The purpose of this study was to investigate the coronal plane alignment of the knee (CPAK) phenotypes of individuals with knee osteoarthritis (OA) progression. We hypothesized that distributions of CPAK phenotypes would be similar throughout OA progression, despite arithmetic hip-knee-ankle angle (aHKA) and joint line obliquity (JLO) changing.

METHODS

A total of 248 patients (79 men and 169 women) participated in the first study in 2012 and the fifth study in 2020. Patients with progression of knee OA for eight years were included. Knee OA progression was defined as advancement from KL grade 0-2 to KL grade 3 or 4. Alignment parameters, including the aHKA, JLO, hip-knee-ankle angle (HKA), lateral distal femur angle (LDFA), medial proximal tibial angle (MPTA), and joint line convergence angle (JLCA), were measured. Changes in distribution of CPAK classifications and alignment parameters were investigated. Alignment parameters were compared using a paired t-test. Statistical significance was defined as p < 0.05.

RESULTS

The study included 48 patients (60 knees). The distributions of all CPAK phenotypes were similar between 2012 and 2020. MPTA (83.7° ± 2.8° vs. 82.3° ± 4.8°, p < 0.01), aHKA (- 3.6° ± 3.8° vs. - 4.9° ± 6.2°, p = 0.01), and JLO (171.1° ± 4.6° vs. 169.5° ± 5.1°, p < 0.01) decreased significantly, and JLCA (1.17° ± 2.2° vs. 3.1° ± 4.7°, p < 0.01) and HKA (4.8° ± 3.9° vs. 8.0° ± 5.4°, p < 0.01) increased significantly. In contrast, LDFA (87.4° ± 3.2° vs. 87.2° ± 3.1°, p = n.s.) did not change significantly.

CONCLUSIONS

The CPAK classification system can predict constitutional alignment, even with knee OA progression, and enables surgeons to perform individualized preoperative alignment planning according to knee phenotypes.

Five or more gender- and size-diverse customizations of distal femur prostheses are needed to improve fit for Chinese knees

PURPOSE

Mismatch between partial imported prostheses and Chinese anatomy affects the clinical outcome of the procedure. The purpose of this study was to measure the anatomical dimensions of Chinese distal femurs to provide guidance for the design of more compatible distal femoral prostheses.

METHODS

A total of 406 healthy distal femurs were reconstructed and measured. Consistency of these measurements and differences in sides, gender, and populations were examined. Parameter correlations were analyzed, and pairs with strong correlations underwent linear regression analysis. The design of distal femoral prostheses was referenced from the results of K-means and hierarchical clustering analysis.

RESULTS

Ten parameters were measured, including the trans-epicondylar axis, width of the distal femur (ML), anteroposterior diameter of the distal femur (AP), etc. The intra-class correlation coefficient ranged from 0.795 to 0.999 for intra-observer consistency, and from 0.796 to 0.998 for inter-observer consistency. Males exhibited significantly larger parameters than females, except for the posterior condylar angle (all P values < 0.05). Compared to other populations, substantial differences were observed for most parameters, such as ML, AP, width of lateral femoral condyle, etc. (all P values < 0.05). Clustering analysis suggested that distal femoral prostheses should include at least five sizes to adequately accommodate the sampled population. ML sizes for males were 68, 70, 83, 73, and 89 mm, and for females 64, 65, 71, 67, and 77 mm. AP sizes for males were 56, 60, 60, 64, and 64 mm, and for females 48, 52, 54, 57, and 58 mm.

CONCLUSIONS

Chinese distal femur morphology, as analyzed using 3D techniques, varies significantly between genders and when compared with international data. For improved patient fit, the creation of five or more distal femur prostheses, diversified by gender and size and informed by the associated morphological parameters, is recommended.

LEVEL OF EVIDENCE

IV.

Knees with anteromedial osteoarthritis show a substantial phenotypic variation prior and following medial unicompartmental knee arthroplasty

PURPOSE

The primary aim of this study was to evaluate the phenotypic variation using the Coronal Plane Alignment of the Knee (CPAK) classification among 1000 knees with anteromedial osteoarthritis (OA) both prior to and following medial unicompartmental knee arthroplasty (UKA). The secondary aim of this study was to investigate whether knees maintained their preoperative CPAK phenotype and to evaluate the phenotypic alterations following medial UKA.

METHODS

The CPAK classification was used to analyze 1000 knees that underwent medial UKA as treatment for anteromedial OA. Knees were categorized into nine distinct CPAK phenotypes based on their arithmetic hip-knee-ankle angle (aHKA), which estimates the pre-arthritic alignment, and joint line obliquity (JLO), both pre- and postoperatively. Phenotypic variation was analyzed by sex and age, and the phenotypic alterations following medial UKA were evaluated by phenotype.

RESULTS

Preoperatively, CPAK phenotype I had the highest prevalence (45.0%). Among males, the preoperative prevalence of CPAK phenotype I was significantly higher compared to females (53.2% vs. 35.0%, respectively; p ≤ .001), whereas females exhibited a significantly higher occurrence of CPAK phenotype V compared to males (9.8% vs. 4.4%, respectively; p ≤ .015). Following medial UKA, CPAK phenotype II had the highest prevalence (53.3%). Overall, 45.1% of knees maintained their preoperative CPAK phenotype following medial UKA, which was most frequently observed among CPAK phenotype II (67.7%) and III (65.8%).

CONCLUSION

There is a substantial variation in CPAK phenotypes among knees with anteromedial OA, as well as following treatment with medial UKA. This variability challenges the assumption of uniform characteristics among knees with an identical wear pattern associated with anteromedial OA and emphasizes the complexity and variability of this specific form of OA.

LEVEL OF EVIDENCE

III, Retrospective cohort study.

Effect of posteromedial vertical capsulotomy with medial collateral ligament liberation on intraoperative medial component gap mismatch between extension and mid-flexion during total knee arthroplasty

PURPOSE

The aim of this study was to quantify the effect of posteromedial vertical capsulotomy on intraoperative component gaps and angles from extension through mid-flexion to flexion during total knee arthroplasty (TKA).

METHODS

In the present study, 47 cases of primary posterior-stabilized TKA using the measured resection technique for varus knee osteoarthritis (hip-knee-ankle angles < 0°) were reviewed. Component gaps and angles at 0°, 10°, 45°, 90°, and maximum flexion were measured intraoperatively, before and after posteromedial vertical capsulotomy. Differences in pre- and post-posteromedial vertical capsulotomy medial and lateral component gaps and angles and medial component gap mismatches among knee flexion angles were assessed using the Wilcoxon signed rank test for two paired samples.

RESULTS

The medial component gaps at 0° and 10° of flexion of post-posteromedial vertical capsulotomy were significantly greater, exceeding the minimal detectable change, than those pre posteromedial vertical capsulotomy (change of the gap after the procedure at 0° of flexion was 0.7 ± 0.7 mm and at 10° of flexion was 0.8 ± 0.8 mm; all P values < 0.05). The medial component gap mismatches between both 0° and 10°, and 45°, 90°, and maximum flexion were significantly smaller post posteromedial vertical capsulotomy than pre posteromedial vertical capsulotomy, with the values of the change exceeding the minimal detectable change (change of the gap mismatch after the procedure: knee flexion at 0° and 45° was - 0.6 ± 0.9 [mm], at 0° and 90° was 0.7 ± 1.0, at 0° and maximum flexion was - 0.6 ± 1.2, at 10° and 45° was - 0.7 ± 0.9, at 10° and 90° was - 0.8 ± 0.9, at 10° and maximum flexion was - 0.7 ± 1.1; all P values < 0.05).

CONCLUSIONS

Posteromedial vertical capsulotomy increased the medial component gaps during knee extension but not during mid-flexion or full flexion during posterior-stabilized TKA. Posteromedial vertical capsulotomy improved mild medial component gap mismatch between extension and mid-flexion and full flexion during posterior-stabilized TKA. Surgeons can consider posteromedial vertical capsulotomy when there is intraoperative constriction of the medial component gap during extension in patients undergoing posterior-stabilized TKA.

Setting the distal and posterior condyle of the femoral component to restore the medial pre-arthritic femoral articular surface results in better outcomes after total knee arthroplasty

PURPOSE

The present study of total knee arthroplasty (TKA) describes an intra-operative method that determines the direction and quantifies the magnitude of deviation of the distal and the posterior medial and lateral (DM, PM, DL, and PL) condyle of the femoral component relative to the pre-arthritic femoral articular surface. For each femoral condyle, the deviations were categorized, and an analysis determined which had better or worse Forgotten Joint Score (FJS), Oxford Knee Score (OKS), and WOMAC scores at 1-year follow-up.

METHODS

Four academic arthroplasty surgeons supervised a cemented primary CR TKA (Triathlon, Stryker) on 120 consecutive patients. 103 that completed patient-reported outcome measures (PROMs) were analyzed. The surgeon determined the direction and the magnitude of deviation of the condyle of the femoral component by intraoperatively measuring the thickness of the femoral resection, adding compensations of 1 mm for the saw kerf and 2 mm for worn cartilage, and then subtracting the thickness of the femoral component's condyle. For each femoral condyle, a Kruskal-Wallis test determined the categories of deviation with clinically important and significantly different 1-year PROMs.

RESULTS

A 1 to 2.5 mm and 3 mm or more proximal deviation of the DM condyle of the femoral component worsened the median FJS by 35 and 40 points, OKS by 9 and 14 points, and WOMAC score by 9 and 17 points, respectively, relative to those with a -0.5 to 0.5 mm deviation (p < 0.01). A 1 to 2.5 mm and 3 mm or more anterior deviation of the PM condyle of the femoral component worsened the FJS by 34 and 48 points, OKS by 7 and 13 points, and WOMAC scores by 8 and 16 points, respectively (p < 0.01). Deviations of the DL and PL condyle of the femoral component did not affect PROMs (p ≥ 0.13).

CONCLUSIONS

Although many factors can affect PROM, such as patient expectations, the surgeon should understand that setting the DM and the PM condyles of the femoral component within 1 mm of the patient's pre-arthritic femoral articular surface can potentially result in better FJS, OKS, and WOMAC scores at 1 year.

LEVEL OF EVIDENCE

II, Prospective cohort study.

Definitions and consequences of current alignment techniques and phenotypes in total knee arthroplasty (TKA) - there is no winner yet

Dissatisfaction following total knee arthroplasty (TKA) has been extensively documented and it was attributed to numerous factors. In recent years, significant focus has been directed towards implant alignment and stability as potential causes and solutions to this issue. Surgeons are now exploring a more personalized approach to TKA, recognizing the importance of thoroughly understanding each individual patient's anatomy and functional morphology. A more comprehensive preoperative analysis of alignment and knee morphology is essential to address the unresolved questions in knee arthroplasty effectively. The crucial task of determining the most appropriate alignment strategy for each patient arises, given the substantial variability in bone resection resulting from the interplay of phenotype and the alignment strategy chosen. This review aims to comprehensively present the definitions of different alignment techniques in all planes and discuss the consequences dependent on knee phenotypes.Level of evidence V.

Long leg radiographs underestimate the degree of constitutional varus limb alignment and joint line obliquity in comparison with computed tomography: a radiographic study

PURPOSE

The purpose of this study was to understand if differences exist between computed tomography (CT) and long leg radiographs (LLR) when defining coronal plane alignment of the lower limb in total knee arthroplasty (TKA). It aimed to identify any such differences between the two imaging modalities by quantifying constitutional limb alignment (arithmetic hip-knee-ankle angle (aHKA), joint line obliquity (JLO) and Coronal Plane Alignment of the Knee (CPAK) type within the same population.

METHODS

A retrospective radiographic study compared pre-operative LLR and CT measurements in patients undergoing robotic-assisted TKA. The aHKA, JLO and CPAK types were calculated after measuring the medial proximal tibial angle (MPTA) and lateral distal femoral angle (LDFA). The primary outcomes were the mean differences in aHKA (MPTA-LDFA), JLO (MPTA + LDFA) and proportions of CPAK types between LLR and CT groups. The secondary outcomes were the differences in CT-derived MPTA values based on four different tibial sagittal landmarks.

RESULTS

After exclusions, 465 imaging sets were analysed in 394 patients. There was a statistically significant mean difference between LLR and CT, respectively, for both MPTA (87.5° vs. 86.2°; p < 0.01) and LDFA (88.7° vs. 87.3°; p < 0.01). There were also statistically significant differences for aHKA (- 0.2° vs. - 1.1°) and JLO (175.1° vs. 173.4°) for LLR and CT, respectively (both p < 0.01). CT increased the proportion of patients with CPAK Type I (constitutional varus aHKA, apex distal JLO) and CPAK Type II (neutral aHKA, apex distal JLO), and decreased numbers of CPAK Types III-VI. There were significant mean differences in the MPTA using varying sagittal landmarks.

CONCLUSION

Alignment determined by LLRs underestimates the magnitude of both constitutional varus alignment and joint line obliquity compared to CT, differences that notably increase the proportions of patients included in CPAK Types I and II. These distinctions are primarily due to underestimation of proximal tibial varus when measured on LLRs compared to CT, which more specifically defines articular weight-bearing points.

LEVEL OF EVIDENCE

III.

The Matsudai Knee Osteoarthritis Survey showed the longitudinal changes of knee phenotypes in alignment and structure during 23-28 years

PURPOSE

The longitudinal changes in alignment and structure, including the joint line and cortical bone thickness (CBT) of the femur and tibia, and knee phenotype in patients with knee osteoarthritis (OA) remain unknown. The aim of this retrospective study was to clarify the longitudinal changes in matched healthy subjects.

METHODS

The follow-up Matsudai Knee Osteoarthritis Survey was administered between 23 and 28 years. This study included 285 healthy knees from 235 females with an average age of 53 ± 6 years at baseline. The non-OA individuals, with an average age of 79 ± 4 years, were divided into three groups at baseline according to their follow-up radiographic results [the non-OA (n = 52), early OA (n = 131), and advanced OA groups (n = 102)]. Changes in alignment, joint line, CBT, and knee phenotype were assessed at baseline and at follow-up using standing anteroposterior radiographs.

RESULTS

This study showed significant varus changes in the alignment (p < 0.001) and tibial and femoral joint line parameters (p < 0.05) in the OA group. Decreased CBT and increased mediolateral CBT ratios were observed in all groups (p < 0.001). The knee phenotypes in the OA groups were changed to varus angles, especially in the alignment and tibial joint line.

CONCLUSIONS

The longitudinal changes of knee phenotypes in alignment and structure (CBT and joint line) from baseline to follow-up were shown in the OA groups. In addition, alignment and tibial structural factors at baseline are useful in predicting the incidence of knee OA in daily practice.

LEVELS OF EVIDENCE

III.

Individual Phenotype Does Not Impact the Outcome of Mechanical Aligned Total Knee Arthroplasties for Valgus Osteoarthritis

Background and Objectives: There is an ongoing discussion about the best alignment targets in total knee arthroplasty (TKA). Mechanical alignment has been the standard in TKA for years. Alongside the development of various classification systems to describe the native alignment of the knee (knee phenotype), kinematic alignment restoring the individual phenotype of the knee has been advocated more recently. Alignment in TKA becomes even more challenging in knees with preoperative deformities such as valgus osteoarthritis. Materials and Methods: The study retrospectively evaluated 158 knees in 135 patients who underwent TKA with a mechanical alignment target for valgus osteoarthritis. Pre- and postoperative hip knee angle, lateral distal femur angle, and medial proximal tibial angle/tibial plate angle (pre-/postoperative) were measured on standing hip-to-ankle radiographs. Knees were grouped according to the coronal plane alignment of the knee (CPAK) classification. Preoperative and postoperative range of motion and patient-related outcome measures (WOMAC, UCLA, SF-12, pain) were assessed. Results: There was no difference in outcome for mechanically aligned TKA between the different CPAK phenotypes, suggesting that mechanical alignment is an appropriate target for the different phenotypes analyzed in the study. Remaining valgus alignment was associated with decreased postoperative UCLA scores and decreased improvement in SF-12 scores (p = 0.011/p = 0.028). Within CPAK III, mechanical aligned TKA showed better postoperative UCLA Scores than TKA with valgus alignment (p = 0.015). The individual knee phenotype in patients with valgus osteoarthritis did not influence the outcome of mechanical aligned TKA operated with standardized soft-tissue release.

Gender-specific distribution of knee morphology according to CPAK and functional phenotype classification: analysis of 8739 osteoarthritic knees prior to total knee arthroplasty using artificial intelligence

PURPOSE

Osteoarthritis of the knee is commonly associated with malalignment of the lower limb. Recent classifications, as the Coronal Plane Alignment of the Knee (CPAK) and Functional Phenotype classification, describe the bony knee morphology in addition to the overall limb alignment. Data on distribution of these classifications is not sufficient in large populations. The aim of this study was to analyse the preoperative knee morphology with regard to the aforementioned classifications in long leg radiographs prior to total knee arthroplasty surgery using Artificial Intelligence.

METHODS

The cohort comprised 8739 preoperative long leg radiographs of 7456 patients of all total knee arthroplasty surgeries between 2009 and 2021 from our institutional database. The automated measurements were performed with the validated Artificial Intelligence software LAMA (ImageBiopsy Lab, Vienna) and included standardized axes and angles [hip-knee-ankle angle (HKA), mechanical lateral distal femur angle (mLDFA), mechanical medial proximal tibia angle (mMPTA), mechanical axis deviation (MAD), anatomic mechanic axis deviation (AMA) and joint line convergence angle (JLCA)]. CPAK and functional phenotype classifications were performed and all measurements were analysed for gender, age, and body mass index (BMI) within these subgroups.

RESULTS

Varus alignment was more common in men (m: 2008, 68.5%; f: 2953, 50.8%) while neutral (m: 578, 19.7%; f: 1357, 23.4%) and valgus (m: 345, 11.8%; f: 1498, 25.8%) alignment was more common in women. The most common morphotypes according to CPAK classification were CPAK Type I (2454; 28.1%), Type II (2383; 27.3%), and Type III (1830; 20.9%). An apex proximal joint line (CPAK Type VII, VIII and IX) was only found in 1.3% of all cases (n = 121). In men, CPAK Type I (1136; 38.8%) and CPAK Type II (799; 27.3%) were the most common types and women were spread more equally between CPAK Type I (1318; 22.7%), Type II (1584; 27.3%) and Type III (1494; 25.7%) (p < 0.001). The most common combination of femur and tibia types was NEUmLDFA0°,NEUmMPTA0° (m: 514, 17.5%; f: 1004, 17.3%), but men showed femoral varus more often. Patients with a higher BMI showed a significantly lower age at surgery (R2 = 0.09, p < 0.001). There were significant differences between men and women for all radiographic parameters (p < 0.001).

CONCLUSION

Distribution in knee morphology with gender-specific differences highlights the wide range in osteoarthritic knees, characterized by CPAK and phenotype classification and may influence future surgical planning.

LEVEL OF EVIDENCE

Level III.

Targeting the neutral hip-to-calcaneus axis in kinematically aligned total knee arthroplasty is feasible with fewer alignment outliers for varus osteoarthritic patients

PURPOSE

Assessment of the conventional mechanical axis (MA) (hip-to-talus axis) is reported to result in constitutional varus in the native knee. However, the ground MA (hip-to-calcaneus axis), which is the line from the hip center to the bottom of the calcaneus, passes through the center of the knee joint in the native knee and is a possible alternative target for total knee arthroplasty (TKA) assessments. Therefore, this study aimed to present a "ground kinematically aligned (KA)-TKA." In this technique, the femoral component is placed on the cylindrical axis using the calipered technique and the tibial component is placed to give a neutral ground MA. Radiographical investigation was used to determine whether physiological alignment can be individually achieved with ground KA-TKA; this was compared with that of a tibia-restricted modified KA-TKA, referring to conventional MA (hip-to-talus axis) results.

METHODS

As the primary endpoint, this prospective cohort study compared the ground MA ratios of the knee joints in 40 ground KA-TKAs (G group: Coronal Plain Alignment of the Knee (CPAK) 28 type I, 7 II, 1 IV, and 4 V) with those of the preceding 60 modified KA-TKAs (M group: CPAK 46 type I, 12 II, and 2 V) performed for patients with varus osteoarthritis (OA). The number of outliers differing over ± 5% from the neutral were compared between groups using the χ2-test. The Hip-knee-ankle (HKA) angle, coronal femoral/tibial component alignment (FCA/TCA), and joint line orientation angle (JLOA) were compared between the groups using non-paired t-tests. Statistical significance was set at p < 0.05.

RESULTS

The G group had a higher ratio of the ground MA passing through the knee center than the M group did; outliers differing over ± 5% from the neutral of the ground MA were 2/40 cases in the G group and 20/60 cases in the M group, which was a significant difference (p = 0.001). The HKA angle, FCA/TCA, and JLOA were not significantly different between the groups.

CONCLUSIONS

Targeting the ground MA in KA-TKA for patients with varus OA was feasible and has the potential to provide a physiological alignment more similar to the native knee in TKA than other kinematic alignment techniques.

LEVEL OF EVIDENCE

Level III.

Effect of mediolateral gap difference on postoperative outcomes in navigation-assisted total knee arthroplasty using an ultracongruent insert and the medial stabilising technique

PURPOSE

This study was aimed to compare the clinical, functional, and radiographic outcomes between symmetric and asymmetric extension and mediolateral gap balance after navigation-assisted (NA) total knee arthroplasty (TKA) using ultracongruent (UC) insets and the medial stabilising technique (MST).

METHODS

In all, 363 knees of 275 patients who underwent mechanical alignment-target NA TKA with MST between January 2015 and December 2017 were analysed. Patients were divided into balanced (extension mediolateral gap difference ≤ 2 mm) and tight medial (difference ≥ 3 mm) groups. Pre- and postoperative clinical, functional (range of motion, Western Ontario and McMaster University Osteoarthritis [WOMAC] index, Knee Society Knee Score [KSKS], and Knee Society Function Score [KSFS]) and radiographic (hip-knee-ankle [HKA] angle, femoral condylar offset, extension angle [a minus indicates hyperextension], and joint line distance) outcomes were compared between the groups. Student's t- or Chi-squared test was used to compare the outcomes.

RESULTS

Among the 363 knees analysed, 279 (77%) were assigned to the balanced group and 84 (23%) to the tight medial group. The preoperative HKA angle was significantly greater in the tight medial group than in the balanced group (9.7° ± 4.1° vs 14.3° ± 4.7°, P < 0.001). The postoperative WOMAC index, KSKS, and KSFS were similar between the groups. The change in the joint line distance was not significantly different (1.5 ± 3.7 vs 2.0 ± 3.3; n.s).

CONCLUSION

The clinical, functional, and radiographic outcomes, including joint line distance, were comparable between the tight medial and balanced group after mechanical alignment-targeted UC TKA with MST.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Navigated functional alignment total knee arthroplasty achieves reliable, reproducible and accurate results with high patient satisfaction

PURPOSE

The decision on which technique to perform a total knee arthroplasty (TKA) has become more complicated over the last decade. Perceived limitations of mechanical alignment (MA) and kinematic alignment (KA) have led to the development of the functional alignment (FA) philosophy. This study aims to report the 2-year results of an initial patient cohort in terms of revision rate, PROMs and complications for Computer Aided Surgery (CAS) Navigated FA TKA.

METHODS

This paper reports a single surgeon's outcomes of 165 consecutive CAS FA TKAs. The final follow-up was 24 months. Pre-operative and post-operative patient-reported outcome measures, WOMAC and KSS, and intra-operative CAS data, including alignment, kinematic curves, and gaps, are reported. Stress kinematic curves were analysed for correlation with CAS final alignment and CAS final alignment with radiographic long-leg alignment. Pre- and post-operative CPAK and knee phenotypes were recorded. Three different types of prostheses from two manufacturers were used, and outcomes were compared. Soft tissue releases, revision and complication data are also reported.

RESULTS

Mean pre-operative WOMAC was 48.8 and 1.2 at the time of the final follow-up. KSS was 48.8 and 93.7, respectively. Pre- and post-operative range of motion was 118.6° and 120.1°, respectively. Pre-operative and final kinematic curve prediction had an accuracy of 91.8%. CAS data pre-operative stress alignment and final alignment strongly correlate in extension and flexion, r = 0.926 and 0.856, p < 0.001. No statistical outcome difference was detected between the types of prostheses. 14.5% of patients required soft tissue release, with the lateral release (50%) and posterior capsule (29%) being the most common.

CONCLUSION

CAS FA TKA in this cohort proved to be a predictable, reliable, and reproducible technique with acceptable short-term revision rates and high PROMs. FA can account for extremes in individual patient bony morphology and achieve desired gap and kinematic targets with soft tissue releases required in only 14.5% of patients.

LEVEL OF EVIDENCE

IV (retrospective case series review).

Independent of the preoperative coronal deformity, adjusted mechanical alignment leads in a high percentage to non-anatomical tibial and femoral bone cuts

PURPOSE

The technique of adjusted mechanical alignment (AMA) in total knee arthroplasty (TKA) has been described to achieve alignment and balancing goals in varus knees in a high percentage, albeit at the price of non-anatomical bone cuts. The purpose of this study was to analyze (1) whether AMA achieves similar alignment and balancing results in different types of deformity and (2) whether they can be achieved without altering the native anatomy.

METHODS

A series of 1000 patients with hip-knee-ankle (HKA) angles from 165° to 195° were analyzed. All patients were operated using AMA technique. According to the preoperative HKA angle, three groups of knee phenotypes (varus, straight, valgus) were defined. The bone cuts were analyzed for being anatomic (< 2 mm deviation of individual joint surface) or non-anatomic (> 4 mm deviation of individual joint surface).

RESULTS

AMA reached the goals for postoperative HKA in over 93% in every group (varus: 636 cases, 94%, straight: 191 cases, 98%, valgus: 123 cases, 98%). In 0° extension, the gaps were balanced in varus knees in 654 cases (96%), in straight knees in 189 cases (97%) and in valgus knees in 117 cases (94%). A balanced flexion gap was found in a similar number of cases (varus: 657 cases, 97%, straight: 191 cases, 98%, valgus: 119 cases, 95%). In the varus group, non-anatomical cuts were performed at the medial tibia (89%) and the lateral posterior femur (59%). The straight group showed similar values and distribution for non-anatomical cuts (medial tibia: 73%; lateral posterior femur 58%). Valgus knees showed a different distribution of values, being non-anatomical at the lateral tibia (74%), distal lateral femur (67%) and posterior lateral femur (43%).

CONCLUSION

In all knee phenotypes, the AMA goals were achieved in a high percentage by altering the patients' native anatomy. In varus knees, the alignment was corrected by non-anatomical cuts at the medial tibia, and in valgus knees at the lateral tibia and the lateral distal femur. All phenotypes showed non-anatomical resections on the posterior lateral condyle in approximately 50% of cases.

LEVEL OF EVIDENCE

III.

Survey of methods and principles in three-dimensional reconstruction from two-dimensional medical images

Three-dimensional (3D) reconstruction of human organs has gained attention in recent years due to advances in the Internet and graphics processing units. In the coming years, most patient care will shift toward this new paradigm. However, development of fast and accurate 3D models from medical images or a set of medical scans remains a daunting task due to the number of pre-processing steps involved, most of which are dependent on human expertise. In this review, a survey of pre-processing steps was conducted, and reconstruction techniques for several organs in medical diagnosis were studied. Various methods and principles related to 3D reconstruction were highlighted. The usefulness of 3D reconstruction of organs in medical diagnosis was also highlighted.