Bone mineral: update on chemical composition and structure

Isovitexin, a natural adiponectin agonist, prevents glucocorticoid-induced osteosarcopenia

PURPOSE

Isovitexin is an agonist of adiponectin receptors (AdipoRs). Adiponectin has been shown to have beneficial effects on bone and muscle function, in addition to its positive impact on metabolic health. However, the preclinical and clinical application of adiponectin faces scalability challenges, prompting the investigation of isovitexin in a methylprednisolone (MP)-induced osteoporosis model.

METHODS

A rat model of MP-induced osteoporosis was developed to evaluate isovitexin's effects on bone health, including bone mass & microarchitecture (MicroCT), turnover markers (P1NP and CTX-1), strength (three-point bending, and nanoindentation), and quality (FTIR). We also investigated the muscle protective effects of isovitexin by measuring key muscle catabolic (atrogenes) proteins.

RESULTS

Isovitexin effectively prevented MP-induced osteopenia in critical weight-bearing, fracture-prone sites, such as the proximal femur and lumbar vertebrae. Bone turnover markers revealed its osteogenic and anti-resorptive properties, crucial for countering glucocorticoid-induced bone loss. Isovitexin treatment preserved the mineral and material composition of bone, indicating that it helps maintain the tissue integrity and mechanical strength. Hitherto observed effects of isovitexin likely resulted in the preservation of bone quality, demonstrated by preserving mechanical behavior and bone strength, which are essential for preventing fractures. MP treatment led to muscle atrophy, evidenced by reduced gastrocnemius diameter and cross-sectional area. Isovitexin countered these effects and inhibited atrogenes (atrogin-1 and MuRF-1) induction.

CONCLUSION

Isovitexin not only mitigates osteopenia but also maintains overall bone quality and composition, exhibiting dual osteogenic and anti-resorptive effects. Its capacity to reduce muscle atrophy underscores its potential as a comprehensive treatment for glucocorticoid-induced osteoporosis and sarcopenia.

Co-precipitating calcium phosphate as oral detoxification of cadmium

Bone-eating (also known as osteophagia), found in wild animals, is primarily recognized as a means to supplement phosphorus and calcium intake. Herein, we describe a novel function of bone-eating in detoxifying heavy metal ions through the dissolution and co-precipitation of bone minerals as they travel through the gastrointestinal (GI) tract. In this study, cadmium (Cd), a heavy metal ion, served as a toxic model. We demonstrated that hydroxyapatite (HAp), the major calcium phosphate (CaP) in bone, dissolves in the stomach and acts as a co-precipitant in the intestine for Cd detoxification. We compared HAp to a common antidote, activated charcoal (AC), which did not precipitate within the GI tract. In vitro experiments showed that HAp dissolves under acidic conditions and, upon return to a neutral environment, efficiently re-sequesters Cd. Similarly, oral administration of HAp effectively prevented Cd absorption and accumulation, resulting in enhanced Cd excretion in the feces when compared to AC. A co-precipitating CaP in the GI tract could serve as an excellent detoxification system, as it helps prevent the accumulation of toxic substances and aids in developing appropriate strategies to reduce tissue toxicity. Moreover, understanding this detoxification system would be a valuable indicator for designing efficient detoxification materials.

Bone Defect Treatment in Regenerative Medicine: Exploring Natural and Synthetic Bone Substitutes

In recent years, the management of bone defects in regenerative medicine and orthopedic surgery has been the subject of extensive research efforts. The complexity of fractures and bone loss arising from trauma, degenerative conditions, or congenital disorders necessitates innovative therapeutic strategies to promote effective healing. Although bone tissue exhibits an intrinsic regenerative capacity, extensive fractures and critical-sized defects can severely compromise this process, often requiring bone grafts or substitutes. Tissue engineering approaches within regenerative medicine have introduced novel possibilities for addressing nonunions and challenging bone defects refractory to conventional treatment methods. Key components in this field include stem cells, bioactive growth factors, and biocompatible scaffolds, with a strong focus on advancements in bone substitute materials. Both natural and synthetic substitutes present distinct characteristics and applications. Natural grafts-comprising autologous, allogeneic, and xenogeneic materials-offer biological advantages, while synthetic alternatives, including biodegradable and non-biodegradable biomaterials, provide structural versatility and reduced immunogenicity. This review provides a comprehensive analysis of the diverse bone grafting alternatives utilized in orthopedic surgery, emphasizing recent advancements and persistent challenges. By exploring both natural and synthetic bone substitutes, this work offers an in-depth examination of cutting-edge solutions, fostering further research and innovation in the treatment of complex bone defects.

Rapid assessment of the osteogenic capacity of hydroxyapatite/aragonite using a murine tibial periosteal ossification model

Biomaterials are widely used as orthopaedic implants and bone graft substitutes. We aimed to develop a rapid osteogenic assessment method using a murine tibial periosteal ossification model to evaluate the bone formation/remodelling potential of a biomaterial within 2-4 weeks. A novel hydroxyapatite/aragonite (HAA) biomaterial was implanted into C57BL/6 mice juxtaskeletally between the tibia and tibialis anterior muscle. Rapid intramembranous bone formation was observed at 14 days, with 4- to 8-fold increases in bone thickness and callus volume in comparison with sham-operated animals (p < 0.0001), followed by bone remodelling and a new layer of cortical bone formation by 28 days after implantation. The addition of zoledronate, a clinically-utilised bisphosphonate, to HAA, promoted significantly more new bone formation than HAA alone over 28 days (p < 0.01). The osteogenic potential of HAA was further confirmed by implanting into a 3.5 mm diameter femoral cancellous bone defect in rats and a 5 mm diameter femoral cortical bone defect in minipigs. To understand the biodegradation and the cellular activity at the cell/biomaterial interfaces, non-decalcified specimens were resin embedded and sections subjected to combined scanning electron microscopy (SEM)/electron backscatter diffraction (EBSD)/energy dispersive X-ray spectrometry (EDS) analysis. We conclude that murine tibial periosteal ossification is a novel method for rapid assessment of the interaction of bioactive materials with osteogenic tissues. This study also highlights that combining calcium carbonate with hydroxyapatite enhances biodegradation and osteogenesis.

Integrating Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy and Multidetector Computed Tomography for Analysis of Heat-Induced Changes in Bone

Charred and burned human and animal skeletal remains are frequently found in archaeological records and can also be subjects of forensic investigations. Heat exposure causes specific changes to the physical and chemical characteristics of these remains, offering valuable insights into their taphonomic history. This research combines the commonly used ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) spectroscopy with the rarely utilised density measurements obtained from Multidetector CT (Computed Tomography) to investigate changes in defleshed bovine cortical bone exposed to different temperatures for varying durations. The inclusion of density measurements is significant because Multidetector CT analysis is non-destructive and can be valuable when remains cannot be removed from their burial context (e.g., urn) or cannot be damaged. The results indicate complex changes in both organic and inorganic components, affecting crystallinity and density. Lower temperatures primarily affect organic matter, while higher temperatures induce significant changes in the mineral lattice and phase transitions. The transformation from β-tricalcium phosphate to α-tricalcium phosphate at high temperatures likely impacts the bone's crystallinity and density. Bone density measured by CT scans provided additional information that complemented the interpretations of FTIR spectroscopy. While CT scans offer important data for planning non-destructive analyses of remains, they present only one layer of information. Therefore, CT scans need to be combined with other techniques to provide comprehensive interpretations of the changes occurring in the bone. Further research is needed on density measurements and other potentially non-destructive analyses to fully unlock the potential of Multidetector CT analyses.

Adsorption of Serum Fetuin onto Octacalcium Phosphate and Its Relation to Osteogenic Property

This study aimed to investigate how the chemical elements in relation to octacalcium phosphate (OCP) hydrolysis affect the osteoblastic differentiation in the presence of serum fetuin. The adsorption of fetuin onto OCP was examined in buffers having different degrees of supersaturation (DS) with respect to OCP and hydroxyapatite (HA) at pH 7.4 and 37 °C. The osteoblastic differentiation of mesenchymal stem cells (MSCs) was evaluated in cultures with OCP and 0 to 0.8 mg/mL of fetuin. The amount of fetuin adsorbed increased with increasing DS in the buffer. In the MSC culture, the coexistence of OCP and 0.2-0.4 mg/mL of fetuin close to serum level increased alkaline phosphatase activity; however, the activity was suppressed by 0.2-0.8 mg/mL of fetuin. Transmission electron microscopy revealed de novo crystal formation on OCP in supersaturated buffer and culture media with respect to OCP and HA at lower fetuin concentrations. Infrared spectroscopy and DS estimation indicate that the hydrolysis of OCP with de novo apatite formation was promoted in the culture media at 0.2-0.4 mg/mL of fetuin. These results suggest that OCP may promote osteoblastic differentiation if the suitable conditions are attained regarding the chemical elements and fetuin adsorption around OCP.

Surface State Control of Apatite Nanoparticles by pH Adjusters for Highly Biocompatible Coatings

Apatite nanoparticles are biocompatible nanomaterials, so their film formation on biodevices is expected to provide effective bonding with living organisms. However, the biodevice-apatite interfaces have not yet been elucidated because there is little experimental evaluation and discussion on the nanoscale interactions, as well as the apatite surface reactivities. Our group has demonstrated the biomolecular adsorption properties on a quartz crystal microbalance with dissipation (QCM-D) sensor coated with apatite nanoparticles, demonstrating the applicability of apatite nanoparticle films on devices. Therefore, it is important to clarify the biodevice-apatite nanointerfaces by characterizing their physicochemical properties. This research aims to control the apatite nanoparticle surfaces using different types of pH adjusters as well as to investigate biodevice-apatite interfaces. In this study, tetramethylammonium hydroxide, sodium hydroxide, and potassium hydroxide were used to adjust the pH during the synthesis of apatite nanoparticles. As a result, it was found that the ratio of Ca-deficient hydroxyapatite phase to B-type carbonate ion-substituted hydroxyapatite phase could be controlled by adjusting the OH- concentration and that the formation of B-type carbonate ion substituted hydroxyapatite phase was demonstrated in terms of the charge compensation because hydrogen phosphate ion in the non-apatitic layer would be diffused and substituted inside the apatite core structure by the replacement of carbonate ion. By contrast, the phosphate ions in the core structure were moved and contained in the non-apatitic layer, and the proportion of phosphate ions in the non-apatitic layer increased. The surface changes of the nanoparticles provide an effective biodevice surface coating. It was observed that the thickness of the electrophoretically deposited nanoparticles clearly increased with the proportion of phosphate ions in the non-apatitic layer. Furthermore, the formation of the hydration layer with immersion in biological fluid was evaluated. It was inferred that the water molecules in the hydration layer interacted with the substituted ions and remained as nonfreezing water layer on the top surface of the nanoparticles, while the abundant phosphate ions newly interacted with the water molecules in the non-apatitic layer, thus increasing the proportion of intermediate water. These results indicated that the hydrogen phosphate and phosphate ions were retained in the non-apatitic layer on the top surfaces of apatite nanoparticles, so that the thickness of the electrophoretically deposited film and the weight fraction of the hydrated layer can be controlled by the component ratio of phosphate ions in the non-apatitic layer. It is expected that surface coating technology using apatite nanoparticles will be applied for biodevices.

The clinical effect of bone perforations in periodontal regeneration and alveolar socket preservation: a systematic review with meta-analysis

OBJECTIVES

The present systematic review aimed to evaluate if cortical bone perforation is effective in enhancing periodontal surgery and guided bone regeneration (GBR) in humans.

MATERIALS AND METHODS

Electronic search was performed in PubMed, Scopus and Cochrane CENTRAL up to October 31st, 2023. Grey literature was also searched. Prospective controlled studies were included. Two PICO questions were created; one focusing on the effect of bone perforation in the treatment of peridodontal intrabony defects (primary outcome probing depth (PD)) and one focusing on the effect of bone perforation in guided bone regeneration (primary outcome: histologic and histomorphometric data). The risk of bias of the included studies was assessed using the Cochrane tool for randomized controlled studies (RCTs) and the Joanna Briggs Institute Critical Appraisal tool for cohort studies. Pairwise meta-analysis was undertaken when possible, to estimate the overall effect for the outcomes investigated.

RESULTS

The search on databases yielded a total of 653 articles. After screening, five RCTs and one non-randomized study were included. A meta-analysis was performed for the first PICO. PD was evaluated in 4 articles and no significant difference was found between the perforation vs. no perforation groups (0.11 mm (95% CI [-0.14 to 0.37 mm], P = 0.38). Additionally, radiographic defect depth (mean difference 0.77 mm, 95% CI [0.24 to 1.30 mm], P = 0.004) and distance between cemento-enamel junction and bone defect (standardized mean difference 0.98 mm, 95% CI [0.47 to 1.50 mm], P = 0.0002) resulted improved in the cortical bone perforation group.

CONCLUSION

The evidence supporting a positive effect of using cortical perforations is very poor. Further studies with larger sample sizes are needed to determine whether decortication brings meaningful advantages.

CLINICAL RELEVANCE

This study is focused on clinical studies and, using a rigorous study selection and a meta-analytic approach suggests that the apparent positive effect of bone decortication on the regeneration process still requires to be confirmed by more solid evidence.

Temperature-induced mobility in octacalcium phosphate impacts crystal symmetry: water dynamics studied by NMR crystallography

Octacalcium phosphate (OCP, Ca8(PO4)4(HPO4)2·5H2O) is a notable calcium phosphate due to its biocompatibility, making it a widely studied material for bone substitution. It is known to be a precursor of bone mineral, but its role in biomineralisation remains unclear. While the structure of OCP has been the subject of thorough investigations (including using Rietveld refinements of X-ray diffraction data, and NMR crystallography studies), important questions regarding the symmetry and H-bonding network in the material remain. In this study, it is shown that OCP undergoes a lowering of symmetry below 200 K, evidenced by 1H, 17O, 31P and 43Ca solid-state NMR experiments. Using ab initio molecular-dynamics (MD) simulations and gauge including projected augmented wave (GIPAW) DFT calculations of NMR parameters, the presence of rapid motions of the water molecules in the crystal cell at room temperature is proved. This information leads to an improved description of the OCP structure at both low and ambient temperatures, and helps explain long-standing issues of symmetry. Remaining challenges related to the understanding of the structure of OCP are then discussed.

Advances in additive manufacturing for bone tissue engineering: materials, design strategies, and applications

The growing annual demand for bone grafts and artificial implants emphasizes the need for effective solutions to repair or replace injured bones. Additive manufacturing technology offers unique merits for advancing bone tissue engineering (BTE), enabling the creation of scaffolds and implants with customized shapes and designs, interconnected architecture, controlled mechanical properties and compositions, and broadening its range of applications. It overcomes the limitations of traditional manufacturing methods such as electrospinning, salt leaching, freeze drying, solvent casting etc. This review highlights additive manufacturing technologies and their applications in BTE, as well as materials and scaffold architectures to widen the potential of the biomedical sector. The selection of optimal printing methods for BTE requires careful consideration of the advantages and disadvantages against the needs for degradation, strength, and biocompatibility. Material extrusion and powder bed fusion techniques are the most widely used additive manufacturing processes in BTE. The comprehensive review also revealed that parametric designs such as triply periodic minimal surface (TPMS) and Voronoi hold better characteristics for their application in BTE. Voronoi designs exhibit exceptional randomness whereas TPMS structures feature high permeability with continuous surfaces. Topology optimized and gradient models exhibited superior physical and mechanical properties compared to uniform lattices. Future research should focus on the development of novel biomaterials, multi-material printing, assessing long-term impacts, and enhancing 3D printing technologies.

Biomaterials for bone tissue engineering: achievements to date and future directions

Advancement in medicine and technology has resulted into prevention of countless deaths and increased life span. However, it is important to note that, the modern lifestyle has altered the food habits, witnessed increased life-style stresses and road accidents leading to several health complications and one of the primary victims is the bone health. More often than ever, healthcare professionals encounter cases of massive bone fracture, bone loss and generation of critical sized bone defects. Surgical interventions, through the use of bone grafting techniques are necessary in such cases. Natural bone grafts (allografts, autografts and xenografts) however, have major drawbacks in terms of delayed rehabilitation, lack of appropriate donors, infection and morbidity that shifted the focus of several investigators to the direction of synthetic bone grafts. By employing biomaterials that are based on bone tissue engineering (BTE), synthetic bone grafts provide a more biologically acceptable approach to establishing the phases of bone healing. In BTE, various materials are utilized to support and enhance bone regeneration. Biodegradable polymers like poly-(lactic acid), poly-(glycolic acid), and poly-(ϵ-caprolactone) are commonly used for their customizable mechanical properties and ability to degrade over time, allowing for natural bone growth. PEG is employed in hydrogels to promote cell adhesion and growth. Ceramics, such as hydroxyapatite and beta-tricalcium phosphate (β-TCP) mimic natural bone mineral and support bone cell attachment, withβ-TCP gradually resorbing as new bone forms. Composite materials, including polymer-ceramic and polymer-glasses, combine the benefits of both polymers and ceramics/glasses to offer enhanced mechanical and biological properties. Natural biomaterials like collagen, gelatin, and chitosan provide a natural matrix for cell attachment and tissue formation, with chitosan also offering antimicrobial properties. Hybrid materials such as decellularized bone matrix retain natural bone structure and biological factors, while functionalized scaffolds incorporate growth factors or bioactive molecules to further stimulate bone healing and integration. The current review article provides the critical insights on several biomaterials that could yield to revolutionary improvements in orthopedic medical fields. The introduction section of this article focuses on the statistical information on the requirements of various bone scaffolds globally and its impact on economy. In the later section, anatomy of the human bone, defects and diseases pertaining to human bone, and limitations of natural bone scaffolds and synthetic bone scaffolds were detailed. Biopolymers, bioceramics, and biometals-based biomaterials were discussed in further depth in the sections that followed. The article then concludes with a summary addressing the current trends and the future prospects of potential bone transplants.

The Role of Citrate in Formation of Mineral Structure of Bone

Ceramic materials produced by various methods from calcium phosphates have long been used in orthopaedic and dental surgery. Until recently, it was generally believed that at least some of them faithfully reproduce bone minerals. Newer studies, however, have shown that hydroxyapatite in bone is closely associated with citrate molecules. This raises the yet unanswered question whether the materials used in clinical practice are optimal in relation to the tasks which they are supposed to fulfil. The description of the function of citrate in bone mineralization requires appropriate background information, which is presented in this review.

Modified five times simulated body fluid for efficient biomimetic mineralization

Simulated body fluid (SBF) is widely utilized in preclinical research for estimating the mineralization efficacy of biomaterials. Therefore, it is of great significance to construct an efficient and stable SBF mineralization system. The conventional SBF solutions cannot maintain a stable pH value and are prone to precipitate homogeneous calcium salts at the early stages of the biomimetic process because of the release of gaseous CO2. In this study, a simple but efficient five times SBF buffered by 5 % CO2 was developed and demonstrated to achieve excellent mineralized microstructure on a type of polymer-aligned nanofibrous scaffolds, which is strikingly similar to the natural human bone tissue. Scanning electron microscopy and energy-dispersive X-ray examinations indicated the growth of heterogeneous apatite with a high-calcium-to-phosphate ratio on the aligned nanofibers under 5 times SBF buffered by 5 % CO2. Moreover, X-ray diffraction spectroscopy and Fourier transform infrared analyses yielded peaks associated with carbonated hydroxyapatite with less prominent crystallization. In addition, the biomineralized aligned polycaprolactone nanofibers demonstrated excellent cell attachment, alignment, and proliferation characteristics in vitro. Overall, the results of this study showed that 5 × SBFs buffered by 5 % CO2 partial pressure are attractive alternatives for the efficient biomineralization of scaffolds in bone tissue engineering, and could be used as a model for the prediction of the bone-bonding bioactivity of biomaterials.

Calcium Orthophosphate (CaPO4) Containing Composites for Biomedical Applications: Formulations, Properties, and Applications

The goal of this review is to present a wide range of hybrid formulations and composites containing calcium orthophosphates (abbreviated as CaPO4) that are suitable for use in biomedical applications and currently on the market. The bioactive, biocompatible, and osteoconductive properties of various CaPO4-based formulations make them valuable in the rapidly developing field of biomedical research, both in vitro and in vivo. Due to the brittleness of CaPO4, it is essential to combine the desired osteologic properties of ceramic CaPO4 with those of other compounds to create novel, multifunctional bone graft biomaterials. Consequently, this analysis offers a thorough overview of the hybrid formulations and CaPO4-based composites that are currently known. To do this, a comprehensive search of the literature on the subject was carried out in all significant databases to extract pertinent papers. There have been many formulations found with different material compositions, production methods, structural and bioactive features, and in vitro and in vivo properties. When these formulations contain additional biofunctional ingredients, such as drugs, proteins, enzymes, or antibacterial agents, they offer improved biomedical applications. Moreover, a lot of these formulations allow cell loading and promote the development of smart formulations based on CaPO4. This evaluation also discusses basic problems and scientific difficulties that call for more investigation and advancements. It also indicates perspectives for the future.

Inorganic Pyrophosphate at Serum Concentration May Not Be Able to Inhibit Mineralization: A Study in Aqueous Solutions and Serum

The constituent ions of calcium phosphate in body fluids are in the supersaturated state and tend to form minerals physiologically or pathologically. Inorganic pyrophosphate (PPi) has been considered as one of the most important inhibitors against the formation of calcium phosphate minerals. However, serum PPi concentrations in humans are maintained at a level of several μmol/L, and its effectiveness and mechanism for mineralization inhibition remain ambiguous. Therefore, this work studied the mineralization process in an aqueous solution, explored the effective inhibitory concentration of PPi by titration, and characterized the species during the reactions. We find that PPi at a normal serum concentration does not inhibit mineralization significantly. Such a conclusion was further confirmed in the PPi-added serum. This work indicates that PPi may not be a major direct inhibitor of mineralization in serum and possibly functions via alternative mechanisms.

Polyelectrolyte-Cation Complexes Using PAsp-Sr Complexes Induce Biomimetic Mineralization with Antibacterial Ability

Remineralized dentin with an antibacterial ability is still a significant challenge in dentistry. Previously, a polyelectrolyte-calcium complexes pre-precursor (PCCP) process is proposed for rapid collagen mineralization. In the present study, the expansion concept of the PCCP process is explored by replacing the calcium with other cations, such as strontium. The results of transmission electron microscopy (TEM), 3D stochastic optical reconstruction microscopy, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, and high-resolution TEM with selected area electron diffraction demonstrate that biomimetic mineralization of collagen fibrils and demineralized dentin could be fulfilled with Sr&F-codoped hydroxyapatite (HAp) after they are treated with poly-aspartic acid-strontium (PAsp-Sr) suspension followed by a phosphate&fluoride solution. Moreover, dentin remineralized with Sr&F-codoped HAp exhibits in vitro and in vivo antibacterial ability against Streptococcus mutans. The cytotoxicity and oral mucosa irritation tests reveal excellent biocompatibility of mineralization mediums (PAsp-Sr suspension and phosphate&fluoride solution). The demineralized dentin's mechanical properties (elastic modulus and microhardness) could be restored almost to that of the intact dentin. Hence, the expansion concept of the PCCP process that replaces calcium ions with some cationic ions along with fluorine opens up new horizons for generating antibacterial remineralized dentin containing ions-doped HAp with excellent biocompatibility via biomimetic mineralization technology.

Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction

OBJECTIVES

Apatite minerals can have various anions and cations in their crystal structure in addition to phosphate ion (PO₄³⁻) and calcium ion (Ca2+). The aim of this study is to investigate effects of the borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate.

METHODS

Nano-crystalline hydroxyapatite (H-Ap) was obtained from a supersaturated buffered solution containing 4.12 mM HPO42- and 5.88 mM Ca2+ (H-Ap). Four additives were used in solid solution methods: (i) 0.588 mM F- (F-Ap), (ii) 5.88 mM Sr2+ (Sr-Ap), (iii) 4.12 mM BO33- (BO3-Ap), and (iv) a surface pre-reacted glass ionomer (S-PRG) filler eluate that contained 0.17 mM Sr2+, 0.588 mM F-, 11.1 mM BO33-- (SPRG-Ap). Apatite crystallization was investigated using a solid-state magic-angle spinning NMR spectroscopy and X-ray diffraction (XRD) with the Rietveld analysis.

RESULTS

A 2D 1H-31P heteronuclear-correlation NMR showed F- ion incorporation in the apatite structure of the F-Ap and SPRG-Ap. The peaks on the 31P axis of the F-Ap, Sr-Ap, and BO3-Ap were different from that of the H-Ap, and the full width at half maximum increased in the following order: H-Ap∼F-Ap∼BO3-Ap< SPRG-Ap< Sr-Ap, suggesting the incorporation of the F-, Sr2+ and BO33-. The incorporation of F and BO3 was further confirmed by 19F and 11B NMR. The XRD revealed that Sr2+ was preferentially incorporated into the CaII site.

SIGNIFICANCE

The F-, Sr2+ and BO33-ions might be involved in modifying the crystallization of apatite precipitation, producing a variety of apatite. S-PRG filler that release these ions may have an effect on remineralization, i.e., the reformation of apatite lost due to caries.

Pseudo-equilibrium equations for calcium phosphate precipitation with multi-unit particles

The chemistry underlying bone mineral formation in vertebrates is the reaction of calcium phosphate precipitation. In a near-neutral solution, an amorphous phase and hydroxyapatite nanoparticles appear successively, and the reaction system containing either of the two kinds of precipitates is in a non-equilibrium state. Here, we propose a pseudo-equilibrium approach to the solution chemistry of the precipitation reactions. We employed two series of reaction systems, collected samples at various stages, and analyzed the solution chemistry data on the basis of a simplified model of reaction. We derived two types of pseudo-equilibrium equations from the two series, respectively. These equations reveal the existence of multiple structural units in a precipitate particle and correlate the ionic product with the surface proportion per structural unit (m). The surface proportion, in turn, is related to the whole particle through a particle-surface equation. Notably, the two types of pseudo-equilibrium constants have the common expression of "Kd = ionic product" if the number of the structural units (u) is large enough. Together, these findings have revealed some aspects of the non-equilibrium thermodynamics of precipitation reactions, indicating the solution chemistry route to the equilibrium state. The concept of the multi-unit particle may shed new light on the study of precipitation reactions of other slightly soluble electrolytes. And the relationship between the ionic product and the surface proportion of a structural unit is not only fundamental in chemistry, but may also apply to non-equilibrium systems in nature and biology, such as marine sedimentation, human vascular calcification, and bone mineral metabolism.

Zinc and Silver-Infused Calcium Silicate Cement: Unveiling Physicochemical Properties and In Vitro Biocompatibility

INTRODUCTION

Calcium silicate-based types of cement have gained recognition in various dental applications due to their exceptional sealing capabilities, bioactivity, and minimal adaptability. However, these materials have certain shortcomings that can lead to mechanical failures and premature degradation. The inclusion of metal ions into their structure is expected to promote their biological activity. This article focuses on the preparation and characterization of calcium silicate cement to enhance its fundamental material properties, by introducing zinc and silver while retaining its biomaterial characteristics.

AIM

This study aims to evaluate the biomedical potential of zinc and silver-impregnated bioactive calcium silicate cement.

MATERIALS AND METHODS

The calcium silicate powder was synthesized via the sol-gel method. Tetraethyl orthosilicate, calcium nitrate, silver nitrate, and zinc nitrate were sequentially added to create the bioactive calcium silicate material. The synthesized particles underwent physicochemical characterization using techniques such as scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and biological characterization through in vitro hemocompatibility assays.

RESULTS

The study's results revealed the presence of multiple crystalline phases (Ag6Si2O7, Zn2SiO4, CaCO3) as indicated by X-ray diffraction. Raman spectra displayed vibrations associated with Si-O-Si and Zn-O bonding in the zinc and silver-infused bioactive calcium silicate. Scanning electron microscopy confirmed a mixture of spherical and sheet-like morphologies, while energy dispersive spectra confirmed the presence of elements Ca, Si, Zn, Ag, O, and C. In vitro hemocompatibility testing affirmed the material's biocompatible nature.

CONCLUSION

In conclusion, the zinc and silver-infused calcium silicate cement was successfully synthesized through an in-house procedure and demonstrated biocompatibility. The inclusion of zinc and silver, known for their osteogenic and antimicrobial properties, is anticipated to enhance the cement's biological properties and broaden its utility in dentistry. Further in vitro and in vivo investigations are imperative to validate its clinical applications and elucidate the molecular mechanisms underlying its efficacy.

Hydroxyapatite 3D-printed scaffolds with Gyroid-Triply periodic minimal surface porous structure: Fabrication and an in vivo pilot study in sheep

Bone repair is a major challenge in regenerative medicine, e.g. for large defects. There is a need for bioactive, highly percolating bone substitutes favoring bone ingrowth and tissue healing. Here, a modern 3D printing approach (VAT photopolymerization) was exploited to fabricate hydroxyapatite (HA) scaffolds with a Gyroid-"Triply periodic minimal surface" (TPMS) porous structure (65% porosity, 90.5% HA densification) inspired from trabecular bone. Percolation and absorption capacities were analyzed in gaseous and liquid conditions. Mechanical properties relevant to guided bone regeneration in non-load bearing sites, as for maxillofacial contour reconstruction, were evidenced from 3-point bending tests and macrospherical indentation. Scaffolds were implanted in a clinically-relevant large animal model (sheep femur), over 6 months, enabling thorough analyses at short (4 weeks) and long (26 weeks) time points. In vivo performances were systematically compared to the bovine bone-derived Bio-OssⓇ standard. The local tissue response was examined thoroughly by semi-quantitative histopathology. Results demonstrated the absence of toxicity. Bone healing was assessed by bone dynamics analysis through epifluorescence using various fluorochromes and quantitative histomorphometry. Performant bone regeneration was evidenced with similar overall performances to the control, although the Gyroid biomaterial slightly outperformed Bio-OssⓇ at early healing time in terms of osteointegration and appositional mineralization. This work is considered a pilot study on the in vivo evaluation of TPMS-based 3D porous scaffolds in a large animal model, for an extended period of time, and in comparison to a clinical standard. Our results confirm the relevance of such scaffolds for bone regeneration in view of clinical practice. STATEMENT OF SIGNIFICANCE: Bone repair, e.g. for large bone defects or patients with defective vascularization is still a major challenge. Highly percolating TPMS porous structures have recently emerged, but no in vivo data were reported on a large animal model of clinical relevance and comparing to an international standard. Here, we fabricated TPMS scaffolds of HA, determined their chemical, percolation and mechanical features, and ran an in-depth pilot study in the sheep with a systematic comparison to the Bio-OssⓇ reference. Our results clearly show the high bone-forming capability of such scaffolds, with outcomes even better than Bio-OssⓇ at short implantation time. This preclinical work provides quantitative data validating the relevance of such TMPS porous scaffolds for bone regeneration in view of clinical evaluation.

Toward osteomimetic formation of calcium phosphate coatings with carbonated hydroxyapatite

Biomimetic production of coatings on various types of scaffolds is based mainly on simulated body fluid precipitation (SBF) of apatites, or, if the HCO₃^- is present, carbonated apatites. Recently, we proposed formation of calcium phosphates (CaP) precipitates by alkaline phosphatase (ALP) hydrolysing glycerophosphate in presence of calcium ions as an alternative to SBF. Since apatites synthesized in bone by the ALP activity contain carbonate anions, it was tempting to investigate whether the phosphatase method could be advanced into osteomimetic one. Therefore, taking example from the SBF studies, phosphatase incubation medium was enriched with carbonate ions at 4.2 and 27 mM concentration. X-ray diffraction of the precipitates disclosed peaks typical for hydroxyapatite (HAP). FTIR analysis showed that at both concentration of carbonate ions, apatites underwent both B and A substitution, more extensive at higher concentration. Thus, osteomimetic approach produced carbonated hydroxyapatites of the type encountered in bone tissue even at HCO₃^- concentration as low as 4.2 mM. Composite plates made of poly(ε-caprolactone) and mixture of β-tricalcium phosphate and hydroxyapatite at mass ratio of 1:0.5:0.5, respectively, were covered by CaP coatings, i.e., CaP-0, CaP-4.2, CaP-27, by incubation in phosphatase medium containing 0, 4.2 or 27 mM of NaHCO₃, respectively. Pristine or coated PCL50 plates were used to study release of calcium and adsorption/desorption of proteins, or seeded with human bone marrow mesenchymal stem cells (hMSC) for study of cell adhesion, spreading and osteogenic differentiation. Introduction of carbonate into the CaP coatings significantly increased release of Ca²⁺ in a carbonate concentration-dependent manner; the release was up to 4 times higher, when compared to CaP-0 coating, and reached 0.41 ± 0.01 mM for CaP-27 after first 24 h. Coating CaP-4.2 yielded significantly higher adsorption of bovine serum albumin and cytochrome C than CaP-0. All of the CaP coatings improved significantly hMSC adhesion, however, only CaP-4.2 provided 2 times higher cell number than PCL50 after 2 weeks of culture. Interestingly, ALP activity calculated per cell number was the highest on pristine plates, presumably because hMSC differentiate preferentially into osteoblasts at lower seeding densities. It appears, therefore, that the osteomimetic approach may be useful for production of carbonated hydroxyapatite coatings, but requires further studies and replacing intestinal phosphatase used in this work with one originating from bone.

Boron nitride nanofiber/Zn-doped hydroxyapatite/polycaprolactone scaffolds for bone tissue engineering applications

In this study, Zn doped hydroxyapatite (Zn HA)/boron nitride nanofiber (BNNF)/poly-ε-caprolactone (PCL) composite aligned fibrous scaffolds are produced with rotary jet spinning (RJS) for bone tissue engineering applications. It is hypothesized that addition of Zn HA and BNNF will contribute to cell viability as well as mechanical and osteogenic properties of the PCL scaffolds. Zn HA was synthesized by mixing Ca and P sources followed by sonication and aging whereas BNNF was obtained by the reaction of melamine with boric acid followed by freeze-drying for annealing of fibers. It is found that incorporation of both Zn HA and BNNF in PCL fibers resulted in higher calcium phosphate (CaP) precipitation on the scaffolds. Also, in vitro cell culture studies showed that presence of both Zn HA and BNNF also had synergistic effect for enhanced proliferation and osteogenic activity of Saos-2 cells. Mechanical properties of PCL-Zn HA-BNNF were found similar to that of non-load bearing bones. Furthermore, the presence of Zn HA and BNNF had synergistic effects to cell attachment, proliferation and spreading without causing cytotoxic effect on cells. The highest ALP activity was obtained in the PCL-Zn HA- BNNF group at days 7 and 14 due to release of zinc, calcium, phosphate and boron. Considering its mechanical and bioactivity properties, PCL-Zn HA-BNNF composite scaffolds hold promise as non-load bearing bone substitutes.

Organized mineralized cellulose nanostructures for biomedical applications

Cellulose is the most abundant naturally-occurring polymer, and possesses a one-dimensional (1D) anisotropic crystalline nanostructure with outstanding mechanical robustness, biocompatibility, renewability and rich surface chemistry in the form of nanocellulose in nature. Such features make cellulose an ideal bio-template for directing the bio-inspired mineralization of inorganic components into hierarchical nanostructures that are promising in biomedical applications. In this review, we will summarize the chemistry and nanostructure characteristics of cellulose and discuss how these favorable characteristics regulate the bio-inspired mineralization process for manufacturing the desired nanostructured bio-composites. We will focus on uncovering the design and manipulation principles of local chemical compositions/constituents and structural arrangement, distribution, dimensions, nanoconfinement and alignment of bio-inspired mineralization over multiple length-scales. In the end, we will underline how these cellulose biomineralized composites benefit biomedical applications. It is expected that this deep understanding of design and fabrication principles will enable construction of outstanding structural and functional cellulose/inorganic composites for more challenging biomedical applications.

The material design of octacalcium phosphate bone substitute: increased dissolution and osteogenecity

Octacalcium phosphate (OCP) has been advocated as a precursor of bone apatite crystals. Recent studies have shown that synthetic OCP exhibits highly osteoconductive properties as a bone substitute material that stems from its ability to activate bone tissue-related cells, such as osteoblasts, osteocytes, and osteoclasts. Accumulated experimental evidence supports the proposition that the OCP-apatite phase conversion under physiological conditions increases the stimulatory capacity of OCP. The conversion of OCP progresses by hydrolysis toward Ca-deficient hydroxyapatite with Ca²⁺ ion incorporation and inorganic phosphate ion release with concomitant increases in the solid Ca/P molar ratio, specific surface area, and serum protein adsorption affinity. The ionic dissolution rate during the hydrolysis reaction was controlled by introducing a high-density edge dislocation within the OCP lattice by preparing it through co-precipitation with gelatin. The enhanced dissolution intensifies the material biodegradation rate and degree of osteogenecity of OCP. Controlling the biodegradation rate relative to the dissolution acceleration may be vital for controlling the osteogenecity of OCP materials. This study investigates the effects of the ionic dissolution of OCP, focusing on the structural defects in OCP, as the enhanced metastability of the OCP phase modulates biodegradability followed by new bone formation. STATEMENT OF SIGNIFICANCE: Octacalcium phosphate (OCP) is recognized as a highly osteoconductive material that is biodegradable by osteoclastic resorption, followed by new bone formation by osteoblasts. However, if the degradation rate of OCP is increased by maintaining the original osteoconductivity or acquiring a bioactivity better than its current properties, then early replacement with new bone can be expected. Although cell introduction or growth factor addition by scaffold materials is the standard method for tissue engineering, material activity can be augmented by introducing dislocations into the lattice of the OCP. This review article summarizes the effects of introducing structural defects on activating OCP, which was obtained by co-precipitation with gelatin, as a bone substitute material and the mechanism of improved bone replacement performance.

Bone Apatite Nanocrystal: Crystalline Structure, Chemical Composition, and Architecture

The biological and mechanical functions of bone rely critically on the inorganic constituent, which can be termed as bone apatite nanocrystal. It features a hydroxylapatite-like crystalline structure, complex chemical compositions (e.g., carbonate-containing and calcium- and hydroxyl-deficient), and fine geometries and properties. The long research with vast literature across broad spectra of disciplines and fields from chemistry, crystallography, and mineralogy, to biology, medical sciences, materials sciences, mechanics, and engineering has produced a wealth of knowledge on the bone apatite nanocrystal. This has generated significant impacts on bioengineering and industrial engineering, e.g., in developing new biomaterials with superior osteo-inductivities and in inspiring novel strong and tough composites, respectively. Meanwhile, confusing and inconsistent understandings on the bone mineral constituent should be addressed to facilitate further multidisciplinary progress. In this review, we present a mineralogical account of the bone-related ideal apatite mineral and then a brief historical overview of bone mineral research. These pave the road to understanding the bone apatite nanocrystal via a material approach encompassing crystalline structure, diverse chemical formulae, and interesting architecture and properties, from which several intriguing research questions emerge for further explorations. Through providing the classical and latest findings with decent clearness and adequate breadth, this review endeavors to promote research advances in a variety of related science and engineering fields.

The Localized Ionic Microenvironment in Bone Modelling/Remodelling: A Potential Guide for the Design of Biomaterials for Bone Tissue Engineering

Bone is capable of adjusting size, shape, and quality to maintain its strength, toughness, and stiffness and to meet different needs of the body through continuous remodeling. The balance of bone homeostasis is orchestrated by interactions among different types of cells (mainly osteoblasts and osteoclasts), extracellular matrix, the surrounding biological milieus, and waste products from cell metabolisms. Inorganic ions liberated into the localized microenvironment during bone matrix degradation not only form apatite crystals as components or enter blood circulation to meet other bodily needs but also alter cellular activities as molecular modulators. The osteoinductive potential of inorganic motifs of bone has been gradually understood since the last century. Still, few have considered the naturally generated ionic microenvironment's biological roles in bone remodeling. It is believed that a better understanding of the naturally balanced ionic microenvironment during bone remodeling can facilitate future biomaterial design for bone tissue engineering in terms of the modulatory roles of the ionic environment in the regenerative process.

Lumped-Element Circuit Modeling for Composite Scaffold with Nano-Hydroxyapatite and Wangi Rice Starch

Mechanistic studies of the interaction of electromagnetic (EM) fields with biomaterials has motivated a growing need for accurate models to describe the EM behavior of biomaterials exposed to these fields. In this paper, biodegradable bone scaffolds were fabricated using Wangi rice starch and nano-hydroxyapatite (nHA). The effects of porosity and composition on the fabricated scaffold were discussed via electrical impedance spectroscopy analysis. The fabricated scaffold was subjected to an electromagnetic field within the X-band and Ku-band (microwave spectrum) during impedance/dielectric measurement. The impedance spectra were analyzed with lumped-element models. The impedance spectra of the scaffold can be embodied in equivalent circuit models composed of passive components of the circuit, i.e., resistors, inductors and capacitors. It represents the morphological, structural and chemical characteristics of the bone scaffold. The developed models describe the impedance characteristics of plant tissue. In this study, it was found that the ε' and ε″ of scaffold composites exhibited up and down trends over frequencies for both X-band and Ku-band. The circuit models presented the lowest mean percentage errors of Z' and Z″, i.e., 3.60% and 13.80%, respectively.

Measurements of Energetic States Resulting from Ion Exchanges in the Isomorphic Crystals of Apatites and Bioapatites

Developments in the field of nanostructures open new ways for designing and manufacturing innovative materials. Here, we focused on new original ways of calculating energy changes during the substitution of foreign ions into the structure of apatites and bioapatites. Using these tools, the energetic costs of ion exchanges were calculated for the exemplary cases known from the literature. It was established that the most costly were ion exchanges of some cations inside apatites and of anions, and the least costly exchanges in tetrad channel positions. Real energy expenses for bioapatites are much smaller in comparison to mineral apatites due to the limited involvement of magnesium and carbonates in the structure of hard tissues. They are of the order of several electron volts per ion. The rigorous dependences of the energy changes and crystallographic cell volumes on the ionic radii of introduced cations were proved. The differentiation of the positioning of foreign ions in locations of Ca(I) and Ca(II) could be calculated in the case of a Ca-Pb reaction in hydroxyapatite. The energetic effects of tooth aging were indicated. The ability of energy change calculation during the ion exchange for isomorphic substances widens the advantages resulting from X-ray diffraction measurements.

Calcium complexes of oxicams: new dimensions in rheumatoid arthritis treatment

Various metals have been complexed with drugs to improve their cellular impact. Inflammatory diseases like rheumatoid arthritis (RA) are characterized by unbalanced production of proinflammatory cytokines (PICs) and prostaglandins with decreased levels of vitamin D and calcium. The inflammation can be suppressed through targeting the formation of PICs or related enzymes by various treatment strategies that involve the use of corticosteroids, disease-modifying antirheumatic drugs and NSAIDs. We present a detailed review on the impact of calcium complexes of oxicams as an advanced treatment strategy for RA. The calcium complexes demonstrate promising capabilities to cure the disease, improve the strength of bones and suppress PICs in RA.

In silico study on probing atomistic insights into structural stability and tensile properties of Fe-doped hydroxyapatite single crystals

Hydroxyapatite (HA, Ca10PO4(OH)2) is a widely explored material in the experimental domain of biomaterials science, because of its resemblance with natural bone minerals. Specifically, in the bioceramic community, HA doped with multivalent cations (e.g., Mg2+, Fe2+, Sr2+, etc.) has been extensively investigated in the last few decades. Experimental research largely established the critical role of dopant content on mechanical and biocompatibility properties. The plethora of experimental measurements of mechanical response on doped HA is based on compression or indentation testing of polycrystalline materials. Such measurements, and more importantly the computational predictions of mechanical properties of single crystalline (doped) HA are scarce. On that premise, the present study aims to build atomistic models of Fe2+-doped HA with varying Fe content (10, 20, 30, and 40 mol%) and to explore their uniaxial tensile response, by means of molecular dynamics (MD) simulation. In the equilibrated unit cell structures, Ca(1) sites were found to be energetically favourable for Fe2+ substitution. The local distribution of Fe2+ ions significantly affects the atomic partial charge distribution and chemical symmetry surrounding the functional groups, and such signatures are found in the MD analyzed IR spectra. The significant decrease in the intensity of the IR bands found in the Fe-doped HA together with band splitting, because of the symmetry changes in the crystal structure. Another important objective of this work is to computationally predict the mechanical response of doped HA in their single crystal format. An interesting observation is that the elastic anisotropy of undoped HA was not compromised with Fe-doping. Tensile strength (TS) is systematically reduced in doped HA with Fe2+ dopant content and a decrease in TS with temperature can be attributed to the increased thermal agitation of atoms at elevated temperatures. The physics of the tensile response was rationalized in terms of the strain dependent changes in covalent/ionic bond framework (Ca-P distance, P-O bond strain, O-P-O angular strain, O-H bond distance). Further, the dynamic changes in covalent bond network were energetically analyzed by calculating the changes in O-H and P-O bond vibrational energy. Summarizing, the current work establishes our foundational understanding of the atomistic phenomena involved in the structural stability and tensile response of Fe-doped HA single crystals.

Bone fragility: conceptual framework, therapeutic implications, and COVID-19-related issues

Bone fragility is the susceptibility to fracture even for common loads because of structural, architectural, or material alterations of bone tissue that result in poor bone strength. In osteoporosis, quantitative and qualitative changes in density, geometry, and micro-architecture modify the internal stress state predisposing to fragility fractures. Bone fragility substantially depends on the structural behavior related to the size and shape of the bone characterized by different responses in the load-deformation curve and on the material behavior that reflects the intrinsic material properties of the bone itself, such as yield and fatigue. From a clinical perspective, the measurement of bone density by DXA remains the gold standard for defining the risk of fragility fracture in all population groups. However, non-quantitative parameters, such as macro-architecture, geometry, tissue material properties, and microcracks accumulation can modify the bone's mechanical strength. This review provides an overview of the role of different contributors to bone fragility and how these factors might be influenced by the use of anti-osteoporotic drugs and by the COVID-19 pandemic.

Bone Molecular Modifications Induced by Diagenesis Followed-Up for 12 Months

After death, diagenesis takes place. Numerous processes occur concomitantly, which makes it difficult to identify the diagenetic processes. The diagenetic processes refer to all processes (chemical or physical) that modify the skeletal remains. These processes are highly variable depending on the environmental factors (weather, temperature, age, sex, etc.), especially in the early stages. Numerous studies have evaluated bone diagenetic processes over long timescales (~millions of years), but fewer have been done over short timescales (between days and thousands of years). The objective of the study is to assess the early stages of diagenetic processes by Raman microspectroscopy over 12 months. The mineral and organic matrix modifications are monitored through physicochemical parameters. Ribs from six humans were buried in soil. The modifications of bone composition were followed by Raman spectroscopy each month. The decrease in the mineral/organic ratio and carbonate type-B content and the increase in crystallinity reveal that minerals undergo dissolution-recrystallization. The decrease in collagen cross-linking indicates that collagen hydrolysis induces the fragmentation of collagen fibres over 12 months.

Electrical Stimulation of Human Adipose-Derived Mesenchymal Stem Cells on O2 Plasma-Treated ITO Glass Promotes Osteogenic Differentiation

Electrical signals represent an essential form of cellular communication. For decades, electrical stimulation has been used effectively in clinical practice to enhance bone healing. However, the detailed mechanisms between electrical stimulation and bone healing are not well understood. In addition, there have been many difficulties in setting up a stable and efficient electrical stimulation system within the in vitro environment. Therefore, various conductive materials and electrical stimulation methods have been tested to establish an effective electrical stimulation system. Through these systems, many studies have been conducted on the effects of electrical stimulation on bone healing and osteogenic differentiation. However, previous studies were limited by the use of opaque conductive materials that obscure the cells; fluorescent observations and staining are known to be two of the critical methods to confirm the states of the cells. Indium tin oxide (ITO) glass is known to have excellent transparency and conductivity, but it is challenging to cultivate cells due to low cell adhesion characteristics. Therefore, we used O2 plasma treatment to increase the hydrophilicity and wettability of ITO glass. This enhanced cell affinity to the glass, providing a stable surface for the cells to attach. Then, electrical stimulation was applied with an amplitude range of 10 to 200 µA at a frequency of 10 Hz. Our results demonstrated that the osteogenic differentiation efficiency was maximized under the amplitude conditions of 10 µA and 50 µA. Accordingly, the results of our study suggest the development of an excellent platform in the field of biological research as a good tool to elucidate various mechanisms of cell bioactivity under electrical conditions.

Effects of Sterilization and Hydrolytic Degradation on the Structure, Morphology and Compressive Strength of Polylactide-Hydroxyapatite Composites

Composites based on polylactide (PLA) and hydroxyapatite (HA) were prepared using a thermally induced phase separation method. In the experimental design, the PLA with low weight-average molar mass (M_w) and high M_w were tested with the inclusion of HA synthesized as whiskers or hexagonal rods. In addition, the structure of HA whiskers was doped with Zn, whereas hexagonal rods were mixed with Sr salt. The composites were sterilized and then incubated in phosphate-buffered saline for 12 weeks at 37 °C, followed by characterization of pore size distribution, molecular properties, density and mechanical strength. Results showed a substantial reduction of PLA M_w for both polymers due to the preparation of composites, their sterilization and incubation. The distribution of pore size effectively increased after the degradation process, whereas the sterilization, furthermore, had an impact on pore size distribution depending on HA added. The inclusion of HA reduced to some extent the degradation of PLA quantitatively in the weight loss in vitro compared to the control without HA. All produced materials showed no cytotoxicity when validated against L929 mouse skin fibroblasts and hFOB 1.19 human osteoblasts. The lack of cytotoxicity was accompanied by the immunocompatibility with human monocytic cells that were able to detect pyrogenic contaminants.

Biomineralization of bone tissue: calcium phosphate-based inorganics in collagen fibrillar organic matrices

BACKGROUND

Bone regeneration research is currently ongoing in the scientific community. Materials approved for clinical use, and applied to patients, have been developed and produced. However, rather than directly affecting bone regeneration, these materials support bone induction, which regenerates bone. Therefore, the research community is still researching bone tissue regeneration. In the papers published so far, it is hard to find an improvement in the theory of bone regeneration. This review discusses the relationship between the existing theories on hard tissue growth and regeneration and the biomaterials developed so far for this purpose and future research directions.

MAINBODY

Highly complex nucleation and crystallization in hard tissue involves the coordinated action of ions and/or molecules that can produce different organic and inorganic composite biomaterials. In addition, the healing of bone defects is also affected by the dynamic conditions of ions and nutrients in the bone regeneration process. Inorganics in the human body, especially calcium- and/or phosphorus-based materials, play an important role in hard tissues. Inorganic crystal growth is important for treating or remodeling the bone matrix. Biomaterials used in bone tissue regeneration require expertise in various fields of the scientific community. Chemical knowledge is indispensable for interpreting the relationship between biological factors and their formation. In addition, sources of energy for the nucleation and crystallization processes of such chemical bonds and minerals that make up the bone tissue must be considered. However, the exact mechanism for this process has not yet been elucidated. Therefore, a convergence of broader scientific fields such as chemistry, materials, and biology is urgently needed to induce a distinct bone tissue regeneration mechanism.

CONCLUSION

This review provides an overview of calcium- and/or phosphorus-based inorganic properties and processes combined with organics that can be regarded as matrices of these minerals, namely collagen molecules and collagen fibrils. Furthermore, we discuss how this strategy can be applied to future bone tissue regenerative medicine in combination with other academic perspectives.

Hierarchy of Bioapatites

Apatites are one of the most intensively studied materials for possible biomedical applications. New perspectives of possible application of apatites correspond with the development of nanomaterials and nanocompounds. Here, an effort to systematize different kinds of human bioapatites forming bones, dentin, and enamel was undertaken. The precursors of bioapatites and hydroxyapatite were also considered. The rigorous consideration of compositions and stoichiometry of bioapatites allowed us to establish an order in their mutual sequence. The chemical reactions describing potential transformations of biomaterials from octacalcium phosphate into hydroxyapatite via all intermediate stages were postulated. Regardless of whether the reactions occur in reality, all apatite biomaterials behave as if they participate in them. To conserve the charge, additional free charges were introduced, with an assumed meaning to be joined with the defects. The distribution of defects was coupled with the values of crystallographic parameters “a” and “c”. The energetic balances of bioapatite transformations were calculated. The apatite biomaterials are surprisingly regular structures with non-integer stoichiometric coefficients. The results presented here will be helpful for the further design and development of nanomaterials.

Dental structure and tooth attachment modes in the common fangtooth Anoplogaster cornuta (Valenciennes, 1833) (Actinopterygii; Trachichthyiformes; Anoplogastridae)

We studied the structure and attachment modes of the teeth of adult Anoplogaster cornuta using light- and scanning-electron microscopic techniques. All teeth were monocuspid, composed solely of orthodentin, and lacked a covering enameloid cap. Fourteen teeth were present in the oral jaws, with three teeth each on the left and right premaxilla and four teeth each on the left and right dentary. The anteriormost premaxillary and dentary teeth were considerably larger than the more posteriorly located ones. The oral jaw teeth were transparent, non-depressible and firmly ankylosed to their respective dentigerous bone by a largely anosteocytic bone of attachment. No evidence for replacement of the large oral jaw teeth was found in the analyzed adult specimens. The bone of attachment exhibited lower calcium and phosphorus concentrations and a higher Ca/P ratio than the orthodentin. The connection between dentinal tooth shaft and bone of attachment was stabilized by a collar of mineralized collagen fibers. In contrast to the oral jaw teeth, the pharyngeal teeth exhibited a ring-like fibrous attachment to their supporting bones. This mode of attachment provides the teeth with some lateral mobility and allows their depression relative to their supporting bones, which may facilitate intra-pharyngeal prey transport. In contrast, a firm ankylosis was observed in numerous small teeth located on the branchial arches. The function of these teeth is presumably to increase the tightness of the pharyngeal basket and thereby the retention of small prey items in a species living in a habitat with only sparse food supply. Our findings corroborate earlier statements on the tooth attachment modes of the oral jaw teeth of Anoplogaster cornuta, but provide new findings for the attachment modes of pharyngeal teeth in this species.

High resolution DLP stereolithography to fabricate biocompatible hydroxyapatite structures that support osteogenesis

Lithography based additive manufacturing techniques, specifically digital light processing (DLP), are considered innovative manufacturing techniques for orthopaedic implants because of their potential for construction of complex geometries using polymers, metals, and ceramics. Hydroxyapatite (HA) coupons, printed using DLP, were evaluated for biological performance in supporting viability, proliferation, and osteogenic differentiation of the human cell line U2OS and human mesenchymal stem cells (MSCs) up to 35 days in culture to determine feasibility for future use in development of complex scaffold geometries. Contact angle, profilometry, and scanning electron microscopy (SEM) measurements showed the HA coupons to be hydrophilic, porous, and having micro size surface roughness, all within favourable cell culture ranges. The study found no impact of leachable and extractables form the DLP printing process. Cells seeded on coupons exhibited morphologies comparable to conventional tissue culture polystyrene plates. Cell proliferation rates, as determined by direct cell count and the RealTime-Glo^TM MT Cell Viability Assay, were similar on HA coupons and standard tissue culture polystyrene plates). Osteogenic differentiation of human MSCs on HA coupons was confirmed using alkaline phosphatase, Alizarin Red S and von Kossa staining. The morphology of MSCs cultured in osteogenic medium for 14 to 35 days was similar on HA coupons and tissue culture polystyrene plates, with osteogenic (geometric, cuboidal morphology with dark nodules) and adipogenic (lipid vesicles and deposits) features. We conclude that the DLP process and LithaBone HA400 slurry are biocompatible and are suitable for osteogenic applications. Coupons served as an effective evaluation design in the characterization and visualization of cell responses on DLP printed HA material. Results support the feasibility of future technical development for 3D printing of sophisticated scaffold designs, which can be constructed to meet the mechanical, chemical, and porosity requirements of an artificial bone scaffold.

Electron Paramagnetic Resonance Characterization of Sodium- and Carbonate-Containing Hydroxyapatite Cement

Ionizing radiation-induced paramagnetic defects in calcified tissues like tooth enamel are indicators of irradiation dose. Hydroxyapatite (HA), the principal constituent in these materials, incorporates a variety of anions (CO₃^2-, F^-, Cl^-, and SiO₄^4-) and cations (Mn²⁺, Li⁺, Cu²⁺, Fe³⁺, Mg²⁺, and Na⁺) that directly or indirectly contribute to the formation of stable paramagnetic centers upon irradiation. Here, we used an underexploited synthesis method based on the ambient temperature setting reaction of a self-hardening calcium phosphate cement (CPC) to create carbonate-containing hydroxyapatite (CHA) and investigate its paramagnetic properties following γ-irradiation. Powder X-ray diffraction and IR spectroscopic characterization of the hardened CHA samples indicate the formation of pure B-type CHA cement. CHA samples exposed to γ-radiation doses ranging from 1 Gy to 150 kGy exhibited an electron paramagnetic resonance (EPR) signal from an orthorhombic CO₂^•- free radical. At γ-radiation doses from 30 to 150 kGy, a second signal emerged that is assigned to the CO₃^•- free radical. We observed that the formation of this second species is dose-dependent, which provided a means to extend the useful dynamic range of irradiated CHA to doses >30 kGy. These results indicate that CHA synthesized via a CPC cement is a promising substrate for EPR-based dosimetry. Further studies on the CHA cement are underway to determine the suitability of these materials for a range of biological and industrial dosimetry applications.

Sustained local ionic homeostatic imbalance caused by calcification modulates inflammation to trigger heterotopic ossification

Heterotopic ossification (HO) is a condition triggered by an injury leading to the formation of mature lamellar bone in extraskeletal soft tissues. Despite being a frequent complication of orthopedic and trauma surgery, brain and spinal injury, the etiology of HO is poorly understood. The aim of this study is to evaluate the hypothesis that a sustained local ionic homeostatic imbalance (SLIHI) created by mineral formation during tissue calcification modulates inflammation to trigger HO. This evaluation also considers the role SLIHI could play for the design of cell-free, drug-free osteoinductive bone graft substitutes. The evaluation contains five main sections. The first section defines relevant concepts in the context of HO and provides a summary of proposed causes of HO. The second section starts with a detailed analysis of the occurrence and involvement of calcification in HO. It is followed by an explanation of the causes of calcification and its consequences. This allows to speculate on the potential chemical modulators of inflammation and triggers of HO. The end of this second section is devoted to in vitro mineralization tests used to predict the ectopic potential of materials. The third section reviews the biological cascade of events occurring during pathological and material-induced HO, and attempts to propose a quantitative timeline of HO formation. The fourth section looks at potential ways to control HO formation, either acting on SLIHI or on inflammation. Chemical, physical, and drug-based approaches are considered. Finally, the evaluation finishes with a critical assessment of the definition of osteoinduction. STATEMENT OF SIGNIFICANCE: The ability to regenerate bone in a spatially controlled and reproducible manner is an essential prerequisite for the treatment of large bone defects. As such, understanding the mechanism leading to heterotopic ossification (HO), a condition triggered by an injury leading to the formation of mature lamellar bone in extraskeletal soft tissues, would be very useful. Unfortunately, the mechanism(s) behind HO is(are) poorly understood. The present study reviews the literature on HO and based on it, proposes that HO can be caused by a combination of inflammation and calcification. This mechanism helps to better understand current strategies to prevent and treat HO. It also shows new opportunities to improve the treatment of bone defects in orthopedic and dental procedures.

The Abundance of Trace Elements in Human Bone Relative to Bone Type and Bone Pathology

As the global population ages and the proportion of individuals afflicted with musculoskeletal disease spirals upward, there is an increasing interest in understanding and preventing bone-related diseases. Bone diseases, such as osteoporosis and osteoarthritis, are known to be influenced by a variety of factors including age, gender, nutrition, and genetics, but are also inherently linked to the human body's ability to produce biominerals of suitable quality. Because the crystal lattice structure and mineralogy of bone hydroxyapatite is surprisingly analogous to geological hydroxyapatite, trace element levels and exposure have long been proposed to influence the structure of biominerals as they do geological minerals (e.g., strontium substitution changes the crystal lattice of bone minerals, while toxic lead disrupt bone cellular processes leading to bone disease). Here, we explore the distribution of trace elements in human bones to evaluate the distribution of these elements with respect to bone type (cortical vs. trabecular) and bone disease (osteoarthritis vs. osteoporosis). We find higher concentrations of many metabolically active transition metals, as well as lead, in cortical bone compared to trabecular bone. When compared to patients who have osteoarthritis, and thus presumably normal bone minerals, osteoporosis patients have higher concentrations of scandium and chromium (Cr) in trabecular bone, and Cr and lead in cortical bone. Lower concentrations of barium and titanium are associated with osteoporotic trabecular bone. This survey is an exploratory cross-sectional geochemical examination of several trace element concentrations previously understudied in human bone minerals.

Unraveling Water-Mediated 31P Relaxation in Bone Mineral

Bone is a dynamic tissue composed of organic proteins (mainly type I collagen), inorganic components (hydroxyapatite), lipids, and water that undergoes a continuous rebuilding process over the lifespan of human beings. Bone mineral is mainly composed of a crystalline apatitic core surrounded by an amorphous surface layer. The supramolecular arrangement of different constituents gives rise to its unique mechanical properties, which become altered in various bone-related disease conditions. Many of the interactions among the different components are poorly understood. Recently, solid-state nuclear magnetic resonance (ssNMR) has become a popular spectroscopic tool for studying bone. In this article, we present a study probing the interaction of water molecules with amorphous and crystalline parts of the bone mineral through ³¹P ssNMR relaxation parameters (T ₁ and T ₂) and dynamics (correlation time). The method was developed to selectively measure the ³¹P NMR relaxation parameters and dynamics of the crystalline apatitic core and the amorphous surface layer of the bone mineral. The measured ³¹P correlation times (in the range of 10^-6-10^-7 s) indicated the different dynamic behaviors of both the mineral components. Additionally, we observed that dehydration affected the apatitic core region more significantly, while H-D exchange showed changes in the amorphous surface layer to a greater extent. Overall, the present work provides a significant understanding of the relaxation and dynamics of bone mineral components inside the bone matrix.

Investigating pair distribution function use in analysis of nanocrystalline hydroxyapatite and carbonate-substituted hydroxyapatite

Hydroxyapatite (HA) is a complex material, which is often nanocrystalline when found within a biological setting. This work has directly compared the structural characteristics derived from data collected using a conventional laboratory-based X-ray diffractometer with those collected from a dedicated pair distribution function (PDF) beamline at Diamond Light Source. In particular, the application of PDF analysis methods to carbonated HA is evaluated. 20 synthetic samples were measured using both X-ray diffraction (XRD) and PDFs. Both Rietveld refinement (of laboratory XRD data) and real-space refinement (of PDF data) were used to analyse all samples. The results of Rietveld and real-space refinements were compared to evaluate their application to crystalline and nanocrystalline hydroxyapatite. Significant relationships were observed between real-space refinement parameters and increasing carbonate substitution. Understanding the local order of synthetic hydroxyapatite can benefit several fields, including both biomedical and clinical settings.

Bone mineral organization at the mesoscale: A review of mineral ellipsoids in bone and at bone interfaces

Much debate still revolves around bone architecture, especially at the nano- and microscale. Bone is a remarkable material where high strength and toughness coexist thanks to an optimized composition of mineral and protein and their hierarchical organization across several distinct length scales. At the nanoscale, mineralized collagen fibrils act as building block units. Despite their key role in biological and mechanical functions, the mechanisms of collagen mineralization and the precise arrangement of the organic and inorganic constituents in the fibrils remains not fully elucidated. Advances in three-dimensional (3D) characterization of mineralized bone tissue by focused ion beam-scanning electron microscopy (FIB-SEM) revealed mineral-rich regions geometrically approximated as prolate ellipsoids, much larger than single collagen fibrils. These structures have yet to become prominently recognized, studied, or adopted into biomechanical models of bone. However, they closely resemble the circular to elliptical features previously identified by scanning transmission electron microscopy (STEM) in two-dimensions (2D). Herein, we review the presence of mineral ellipsoids in bone as observed with electron-based imaging techniques in both 2D and 3D with particular focus on different species, anatomical locations, and in proximity to natural and synthetic biomaterial interfaces. This review reveals that mineral ellipsoids are a ubiquitous structure in all the bones and bone-implant interfaces analyzed. This largely overlooked hierarchical level is expected to bring different perspectives to our understanding of bone mineralization and mechanical properties, in turn shedding light on structure-function relationships in bone. STATEMENT OF SIGNIFICANCE: In bone, the hierarchical organization of organic (mainly collagen type I) and inorganic (calcium-phosphate mineral) components across several length scales contributes to a unique combination of strength and toughness. However, aspects related to the collagen-mineral organization and to mineralization mechanisms remain unclear. Here, we review the presence of mineral prolate ellipsoids across a variety of species, anatomical locations, and interfaces, both natural and with synthetic biomaterials. These mineral ellipsoids represent a largely unstudied feature in the organization of bone at the mesoscale, i.e., at a level connecting nano- and microscale. Thorough understanding of their origin, development, and structure can provide valuable insights into bone architecture and mineralization, assisting the treatment of bone diseases and the design of bio-inspired materials.

X-ray diffraction (XRD) evaluation of questioned cremains

The practice of cremating human remains is becoming increasingly common around the world, which has also resulted in increased incidents of mishandling, illegal disposal, and fraud. X-ray diffraction (XRD) offers a clear method of differentiating cremated remains from common filler materials, such as cement and wood ash. XRD can also be used to determine if cremated remains have been contaminated, and if so, to what extent. An evaluation of published data and in-house work, however, demonstrates that XRD cannot be used to differentiate human cremains from the processed cremains of other animals. XRD is a powerful analytical technique but must be employed with an understanding of both the limits of the instrumentation and the wide diversity of the human population.

On the Comprehensive Precipitation of Hydroxyapatites Unraveled by a Combined Kinetic-Thermodynamic Approach

The present study combines experimental and theoretical approaches to investigate the competitive precipitation of calcium phosphates (CaPs) in aqueous solution in order to understand and control both the structural and textural properties of the synthesized hydroxyapatites (HAps). Some of the precipitation reactions were followed by in situ Raman spectroscopy or achieved under kinetically controlled conditions. The CaP precursors of HAps were identified as a function of the precipitation pH of the medium and the order of introduction of the precursor ions in the synthesis reactor. Their formation was rationalized by calculations based on a homogeneous nucleation model. Depending on the synthesis conditions, precipitation reaction pathways of HAps are proposed by bringing together the kinetic model developed in the present study and our previous thermodynamic model. HAps are complex materials due to the ease with which large amounts of crystallographic defects, such as carbonates and hydrogen phosphates, can be incorporated in their structure. As these defects play a key role in material sciences (bone substitute, heterogeneous acid-base catalysis, etc.), the present work also includes the analysis of the formation of these crystallographic defects in the apatitic framework, allowing a better control of their incorporation through careful selection of operating parameters.

Hydrogen Phosphates Play a Critical Structural Role in Amorphous Calcium Phosphates

Amorphous calcium phosphate (ACP) is an intriguing mineral phase of calcium phosphate in its own right, in addition to its relevance in biomineralization. We hereby demonstrate that ACPs prepared by...