Prediction of hip osteoporosis by DXA using a novel pulse-echo ultrasound device

Exhaled breath metabolites reveal postmenopausal gut-bone cross-talk and non-invasive markers for osteoporosis

BACKGROUND

Menopause driven decline in estrogen exposes women to risk of osteoporosis. Detection of early onset and silent progression are keys to prevent fractures and associated burdens.

METHODS

In a discovery cohort of 120 postmenopausal women, we combined repeated quantitative pulse-echo ultrasonography of bone, assessment of grip strength and serum bone markers with mass-spectrometric analysis of exhaled metabolites to find breath volatile markers and quantitative cutoff levels for osteoporosis. Obtained markers and cutoffs were validated in an independent cohort of 49 age-matched women with six months apart seasonal follow-ups.

RESULTS

Here, within the discovery cohort, concentrations of exhaled end-tidal dimethyl sulfide (DMS), allyl-methyl sulfide, butanethiol and butyric acid are increased (p ≤ 0.005) pronouncedly in subjects with bone mineral density (BMD) at high-risk of osteoporosis and fracture, when compared to subjects with normal BMD. Increased age and decreased grip strength are concomitant. All changes are reproduced during independent validation and seasonal follow-ups. Exhaled metabolite expressions remain age independent. Serum markers show random expressions without reproducibility. DMS exhalations differs between patients with recent, old and without fractures. Metabolite exhalations and BMDs are down-regulated during winter. ROC analysis in discovery cohort yields high classification accuracy of DMS with a cutoff for osteoporosis, which predicts subjects at high-risk within the independent validation cohort with >91% sensitivity and specificity.

CONCLUSIONS

Non-invasive analysis of exhaled DMS allowed more reliable classification of osteoporosis risk than conventional serum markers. We identified associations of exhaled organosulfur and short-chain fatty acids to bone metabolism in postmenopausal osteoporosis via a gut-bone axis.

The Biomechanics of Musculoskeletal Tissues during Activities of Daily Living: Dynamic Assessment Using Quantitative Transmission-Mode Ultrasound Techniques

The measurement of musculoskeletal tissue properties and loading patterns during physical activity is important for understanding the adaptation mechanisms of tissues such as bone, tendon, and muscle tissues, particularly with injury and repair. Although the properties and loading of these connective tissues have been quantified using direct measurement techniques, these methods are highly invasive and often prevent or interfere with normal activity patterns. Indirect biomechanical methods, such as estimates based on electromyography, ultrasound, and inverse dynamics, are used more widely but are known to yield different parameter values than direct measurements. Through a series of literature searches of electronic databases, including Pubmed, Embase, Web of Science, and IEEE Explore, this paper reviews current methods used for the in vivo measurement of human musculoskeletal tissue and describes the operating principals, application, and emerging research findings gained from the use of quantitative transmission-mode ultrasound measurement techniques to non-invasively characterize human bone, tendon, and muscle properties at rest and during activities of daily living. In contrast to standard ultrasound imaging approaches, these techniques assess the interaction between ultrasound compression waves and connective tissues to provide quantifiable parameters associated with the structure, instantaneous elastic modulus, and density of tissues. By taking advantage of the physical relationship between the axial velocity of ultrasound compression waves and the instantaneous modulus of the propagation material, these techniques can also be used to estimate the in vivo loading environment of relatively superficial soft connective tissues during sports and activities of daily living. This paper highlights key findings from clinical studies in which quantitative transmission-mode ultrasound has been used to measure the properties and loading of bone, tendon, and muscle tissue during common physical activities in healthy and pathological populations.

Application of Artificial Intelligence Methods on Osteoporosis Classification with Radiographs-A Systematic Review

Osteoporosis is a complex endocrine disease characterized by a decline in bone mass and microstructural integrity. It constitutes a major global health problem. Recent progress in the field of artificial intelligence (AI) has opened new avenues for the effective diagnosis of osteoporosis via radiographs. This review investigates the application of AI classification of osteoporosis in radiographs. A comprehensive exploration of electronic repositories (ClinicalTrials.gov, Web of Science, PubMed, MEDLINE) was carried out in adherence to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 statement (PRISMA). A collection of 31 articles was extracted from these repositories and their significant outcomes were consolidated and outlined. This encompassed insights into anatomical regions, the specific machine learning methods employed, the effectiveness in predicting BMD, and categorizing osteoporosis. Through analyzing the respective studies, we evaluated the effectiveness and limitations of AI osteoporosis classification in radiographs. The pooled reported accuracy, sensitivity, and specificity of osteoporosis classification ranges from 66.1% to 97.9%, 67.4% to 100.0%, and 60.0% to 97.5% respectively. This review underscores the potential of AI osteoporosis classification and offers valuable insights for future research endeavors, which should focus on addressing the challenges in technical and clinical integration to facilitate practical implementation of this technology.

New point-of-care calcaneal ultrasound densitometer (Osteosys BeeTLE) compared to standard dual-energy X-ray absorptiometry (DXA)

Dual-energy X-ray absorptiometry (DXA) represents the gold standard for measuring bone mineral density (BMD). However, its size and bulkiness limit its use in mass screening. Portable and easily accessible instruments are more suitable for this purpose. We conducted a study to assess the repeatability, sensitivity, accuracy, and validation of a new ultrasound densitometer for the calcaneus (OsteoSys BeeTLe) compared to standard DXA. BMD (g/cm2) was measured at the femoral and lumbar spine levels using DXA (Discovery Acclaim (Hologic, Waltham, MA, USA) or Lunar Prodigy (GE Healthcare, Madison, WI, USA) devices). Bone Quality Index (BQI, a dimensionless measure of bone quality derived from measures of SOS [Speed Of Sound] and BUA [broadband ultrasound attenuation]) was measured with OsteoSys BeeTLe. The Bland-Altman test and simple linear regression were used to evaluate the association between values measured with the two instruments. Additionally, the ability of the T-score calculated with BeeTLe to identify patients with previous osteoporotic fractures was tested using ROC curves. A total of 201 patients (94.5% females) with a mean age of 62.1 ± 10.2 were included in the study. The BeeTLe instrument showed a coefficient of variation (CV, in 75 repeated measurements) of 1.21%, which was not statistically different from the CV of DXA (1.20%). We found a significant association between BQI and BMD at the femoral neck (r2 = 0.500, p < 0.0001), total femur (r2 = 0.545, p < 0.0001), and lumbar spine (r2 = 0.455, p < 0.0001). T-scores bias were 0.215 (SD 0.876), 0.021 (SD 0.889) and 0.523 (SD 0.092), for femoral neck, total hip and lumbar spine respectively. AUC for discriminating fracture and non-fractured patients were not significantly different with OsteoSys BeeTLe and standard DXA. In this preliminary study, BeeTLe, a new point-of-care ultrasound densitometer, demonstrated good repeatability and performance similar to DXA. Therefore, its use can be proposed in screening for osteoporosis.

Development and validation of an open-source tool for opportunistic screening of osteoporosis from hip CT images

Aims

This study aimed to develop and validate a fully automated system that quantifies proximal femoral bone mineral density (BMD) from CT images.

Methods

The study analyzed 978 pairs of hip CT and dual-energy X-ray absorptiometry (DXA) measurements of the proximal femur (DXA-BMD) collected from three institutions. From the CT images, the femur and a calibration phantom were automatically segmented using previously trained deep-learning models. The Hounsfield units of each voxel were converted into density (mg/cm3). Then, a deep-learning model trained by manual landmark selection of 315 cases was developed to select the landmarks at the proximal femur to rotate the CT volume to the neutral position. Finally, the CT volume of the femur was projected onto the coronal plane, and the areal BMD of the proximal femur (CT-aBMD) was quantified. CT-aBMD correlated to DXA-BMD, and a receiver operating characteristic (ROC) analysis quantified the accuracy in diagnosing osteoporosis.

Results

CT-aBMD was successfully measured in 976/978 hips (99.8%). A significant correlation was found between CT-aBMD and DXA-BMD (r = 0.941; p < 0.001). In the ROC analysis, the area under the curve to diagnose osteoporosis was 0.976. The diagnostic sensitivity and specificity were 88.9% and 96%, respectively, with the cutoff set at 0.625 g/cm2.

Conclusion

Accurate DXA-BMD measurements and diagnosis of osteoporosis were performed from CT images using the system developed herein. As the models are open-source, clinicians can use the proposed system to screen osteoporosis and determine the surgical strategy for hip surgery.

Pulse-echo ultrasound measurement in osteoporosis screening: a pilot study in older patients

BACKGROUND

A mere 25% of patients who need treatment for osteoporosis receive appropriate therapy, partly due to the time-consuming and stressful diagnostic workup for older patients with functional decline.

AIMS

The purpose of the present study was to investigate the accuracy of pulse-echo ultrasound measurement of the lower leg for the detection of osteoporosis in older patients, and evaluate the effect of a proposed diagnostic algorithm.

METHODS

Cortical thickness and the so-called density index (DI) were measured prospectively on the lower leg with a pulse-echo ultrasound (PEUS) device. The accuracy of the device was compared with dual-energy X-ray absorptiometry (DXA) of the hip. We calculated algorithms combining FRAX® scores and PEUS measures as a guide for specific treatment of osteoporosis.

RESULTS

Three hundred and thirty-three patients aged on average 81 years (82.1% women, 275/333) were included in the study. The sensitivity of the ultrasound device versus DXA for the detection of osteoporosis was 94.4% (84/89), and the specificity was 59% (144/247). The gender-specific sensitivity was 96.2% (75/78) for women and 81.8% (9/11) for men.

DISCUSSION

Clinical decisions for the specific treatment of osteoporosis could be based on the proposed algorithm, without additional DXA measurements, in 90.9% (303/333) of the patients.

CONCLUSION

Older patients with a similar risk profile as in our study population may benefit from PEUS, as it is a non-invasive, cost-effective, and efficient diagnostic tool with high accuracy in screening patients for osteoporosis and the risk of fractures.

Denosumab for Prevention of Acute Onset Immobilization-Induced Alterations of Bone Turnover: A Randomized Controlled Trial

Metabolic bone disease is a devastating condition in critically ill patients admitted to an intensive care unit (ICU). We investigated the effects of early administration of the antiresorptive drug denosumab on bone metabolism in previously healthy patients. Fourteen patients with severe intracerebral or subarachnoid hemorrhage were included in a phase 2 trial. Within 72 hours after ICU admission, they were randomized in a 1:1 ratio to receive denosumab 60 mg or placebo subcutaneously. The primary endpoint was group differences in the percentage change of C-terminal telopeptide of type 1 collagen (CTX-1) levels in serum from denosumab/placebo application to 4 weeks thereafter. Changes in serum levels of bone formation markers and urinary calcium excretion were secondary outcome parameters. Regarding serum levels of CTX-1, changes over time averaged -0.45 ng/mL (95% confidence interval [CI] -0.72, -0.18) for the denosumab group and 0.29 ng/mL (95% CI -0.01, 0.58) for the placebo group. The primary endpoint, the group difference in changes between baseline and secondary measurement, adjusted for baseline serum levels and baseline neurological status, averaged -0.74 ng/mL (95% CI -1.14, -0.34; p = 0.002). The group difference in changes between baseline and secondary osteocalcin measurement averaged -5.60 ng/mL (95% CI -11.2, -0.04; p = 0.049). The group difference in averaged change between baseline and secondary measurement of 24-hour urine calcium excretion was significant (-1.77 mmol/L [95% CI -3.48, -0.06; p = 0.044]). No adverse events could be attributed to the study medication. The investigation proved that a single application of denosumab early after admission to an ICU prevents acute immobilization-associated increase in bone resorption among previously healthy individuals. © 2022 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Trabecular bone score and phalangeal quantitative ultrasound are associated with muscle strength and fracture risk in hemodialysis patients

There is growing interest in the relationship between chronic kidney disease (CKD) and fragility fracture risk. Bone mineral density (BMD) is a major determinant of bone strength, although its role as a predictor of fracture in advanced CKD and hemodialysis is still under debate. We aimed to further investigate surrogates of bone quality and their associations with muscle strength and fracture risk in hemodialysis. Multiple clinical risk factors for fracture and an estimated 10-year probability of fracture, BMD at lumbar spine and femur, trabecular bone score (TBS), X-ray vertebral morphometry, phalangeal bone quantitative ultrasonography (QUS), tibial pulse-echo ultrasonography (PEUS), and handgrip strength were evaluated in a setting of hemodialysis patients in treatment with acetate-free biofiltration (AFB) or bicarbonate hemodialysis. The bone ultrasound measurements, both at phalangeal and tibial sites, were significantly associated with lumbar and femoral DXA values. Handgrip strength was significantly associated with the 10-year probability of fracture (r = -0.57, p < 0.001 for major fractures and r = -0.53, p < 0.001 for hip fracture, respectively), with femur neck, total femur, and L1-L4 BMD values (r = 0.47, p = 0.04; r = 0.48, p = 0.02; r = 0.58, p = 0.007, respectively), with TBS at the lumbar spine (r = 0.71, p < 0.001) and with the phalangeal QUS measure of AD-SoS (r = 0.369, p = 0.023). In the hemodialysis group, 10 participants (24.3%) reported at least one morphometric vertebral fracture (Vfx); conversely, only six participants (15%) showed Vfx in the control group. In the hemodialysis group, participants with Vfx compared with participants without Vfx reported significantly different TBS, bone transmission time (BTT), cortical thickness, and handgrip strength (p < 0.05). At multiple regression analysis, by identifying as dependent variable the 10-year fracture risk for major fracture, after correcting for age, BMI, time since dialysis, AD-SoS, cortical bone thickness, and handgrip strength, only BTT (β = -15.21, SE = 5.91, p = 0.02) and TBS (β = -54.69, SE = 21.88, p = 0.02) turned out as independently associated with fracture risk. In conclusion, hemodialysis patients showed a higher fracture risk and lower surrogate indices of bone strength as TBS and QUS parameters. In this cohort of patients, handgrip strength measurements appeared to be a useful instrument to identify high-fracture-risk subjects.

Changes in bone mineral density in unconscious immobile stroke patients from the acute to chronic phases of brain diseases

Objectives

Decreased bone mineral density (BMD) is observed in immobile stroke patients. But it is not clarified yet how rapidly BMD reduction occurs or what the most influencing factor to BMD loss is.

Methods

BMDs in the lumbar vertebrae and the proximal femur of the paralyzed side were measured in 100 immobile stroke patients at 1 week (0 month), 1 month, and 2 months after admission. The levels of serum calcium, phosphorous, 25-hydroxyvitamin D, and urine cross-linked N-telopeptide of type I collagen (NTx) were also measured.

Results

The average age of patients was 75.0 ± 11.4 years (31–94 years). No BMD reduction was identified in the lumbar vertebrae in 2 months; however, BMD in the femur significantly decreased in 2 months in female patients (P < 0.05). Serum calcium and phosphorous levels remained within the normal range during hospitalization, and 25-hydroxyvitamin D value rose in 2 months. Urine NTx significantly increased in both males and females in 2 months (male: P < 0.05, female: P < 0.01).

Conclusions

While there was no significant change in lumbar spine BMD in the 2 month period of immobilization after stroke, BMD in the proximal femur showed a significant reduction, particularly in women. The differential loss of BMD in the 2 regions of interest could possibly be due to the physical forces acting on different body parts during mobilization and nutritional factors. More studies are needed with larger study samples and prolonged follow-up to check the accuracy of these observations.

Quantitative Ultrasound (QUS) in the Management of Osteoporosis and Assessment of Fracture Risk: An Update

Quantitative ultrasound (QUS) presents a low cost and readily available alternative to DXA measurements of bone mineral density (BMD) for osteoporotic fracture risk assessment. It is performed in a variety of skeletal sites, among which the most widely investigated and clinically used are first the calcaneus and then the radius. Nevertheless, there is still uncertainty in the incorporation of QUS in the clinical management of osteoporosis as the level of clinical validation differs substantially upon the QUS models available. In fact, results from a given QUS device can unlikely be extrapolated to another one, given the technological differences between QUS devices. The use of QUS in clinical routine to identify individuals at low or high risk of fracture could be considered primarily when central DXA is not easily available. In this later case, it is recommended that QUS bone parameters are used in combination with established clinical risk factors for fracture. Currently, stand-alone QUS is not recommended for treatment initiation decision making or follow-up. As WHO classification of osteoporosis thresholds cannot apply to QUS, thresholds specific for given QUS devices and parameters need to be determined and cross-validated widely to have a well-defined and certain use of QUS in osteoporosis clinical workflow. Despite the acknowledged current clinical limitations for QUS to be used more widely in daily routine, substantial progresses have been made and new results are promising.

Cortical bone thickness of the distal radius predicts the local bone mineral density

AIMS

The distal radius is a major site of osteoporotic bone loss resulting in a high risk of fragility fracture. This study evaluated the capability of a cortical index (CI) at the distal radius to predict the local bone mineral density (BMD).

METHODS

A total of 54 human cadaver forearms (ten singles, 22 pairs) (19 to 90 years) were systematically assessed by clinical radiograph (XR), dual-energy X-ray absorptiometry (DXA), CT, as well as high-resolution peripheral quantitative CT (HR-pQCT). Cortical bone thickness (CBT) of the distal radius was measured on XR and CT scans, and two cortical indices mean average (CBTavg) and gauge (CBTg) were determined. These cortical indices were compared to the BMD of the distal radius determined by DXA (areal BMD (aBMD)) and HR-pQCT (volumetric BMD (vBMD)). Pearson correlation coefficient (r) and intraclass correlation coefficient (ICC) were used to compare the results and degree of reliability.

RESULTS

The CBT could accurately be determined on XRs and highly correlated to those determined on CT scans (r = 0.87 to 0.93). The CBTavg index of the XRs significantly correlated with the BMD measured by DXA (r = 0.78) and HR-pQCT (r = 0.63), as did the CBTg index with the DXA (r = 0.55) and HR-pQCT (r = 0.64) (all p < 0.001). A high correlation of the BMD and CBT was observed between paired specimens (r = 0.79 to 0.96). The intra- and inter-rater reliability was excellent (ICC 0.79 to 0.92).

CONCLUSION

The cortical index (CBTavg) at the distal radius shows a close correlation to the local BMD. It thus can serve as an initial screening tool to estimate the local bone quality if quantitative BMD measurements are unavailable, and enhance decision-making in acute settings on fracture management or further osteoporosis screening. Cite this article: Bone Joint Res 2021;10(12):820-829.

Assessment of Skeletal Strength: Bone Density Testing and Beyond

A bone fractures when a force applied to it exceeds its strength. Assessment of bone strength is an important component in determining the risk of fracture and guiding treatment decisions. Dual-energy X-ray absorptiometry is used to diagnosis osteoporosis, estimate fracture risk, and monitor changes in bone density. Fracture risk algorithms provide enhanced fracture risk predictability. Advanced technologies with computed tomography (CT) and MRI can measure parameters of bone microarchitecture. Mathematical modeling using CT data can evaluate the behavior of bone structures in response to external loading. Microindentation techniques directly measure the strength of outer bone cortex.

Pulse-echo Ultrasound Identifies Caucasian and Hispanic Women at Risk for Osteoporosis

BACKGROUND

Pulse-echo ultrasonography (PEUS) is a novel ultrasound method that measures the thickness of cortical bone at peripheral skeletal sites with a handheld device connected to a personal computer using proprietary software. Previous studies have shown a significant correlation between density index (DI), a PEUS-derived parameter, and bone mineral density (BMD) measured by dual-energy X-ray absorptiometry at the hip. DI thresholds that discriminate patients likely to have osteoporosis with 90% sensitivity and 90% specificity have been established in a population of Caucasian women in Finland and validated in a study of predominately Caucasian women in the state of Minnesota in the USA. The DI thresholds have not previously been evaluated in non-Caucasian populations.

METHODOLOGY

This study aimed to determine whether previously established DI thresholds in Caucasian women require adjustment in Hispanic women. PEUS measurements at the proximal tibia and dual-energy X-ray absorptiometry BMD at the hip were evaluated in Caucasian and Hispanic women at a single investigative site in Albuquerque, New Mexico, USA. DI was calculated for each patient and compared with BMD. The performance of DI threshold values for these populations was compared.

RESULTS

The study enrolled 293 postmenopausal women (153 Caucasian, 140 Hispanic) with and without osteoporosis. The sensitivity and specificity for DI thresholds to distinguish women with total hip or femoral neck T-score ≤ -2.5 or > -2.5 was similar in Caucasians (sensitivity 80%, specificity 86%) and Hispanics (sensitivity 80%, specificity 91%).

CONCLUSIONS

The findings of this study confirm the utility of previously established DI thresholds to identify women who are likely or unlikely to have osteoporosis and suggest that the same thresholds can be used for postmenopausal Caucasian and Hispanic women.

Fragility fracture discriminative ability of radius quantitative ultrasound: a systematic review and meta-analysis

The fragility fracture discriminative ability of radius quantitative ultrasound (QUS) was evaluated in a systematic review of 13 studies, including 16,681 individuals and 1296 fractures. The radial speed of sound (SOS) per standard deviation (SD) decrease contributed to an increased risk of total and hip fracture by 32% and 66% in women. Osteoporotic fracture, as a devastating consequence of osteoporosis, brings severe socio-economic burden. The availability of dual-energy X-ray absorptiometry (DXA), as the gold standard of diagnosis, was quite limited in remote areas. Radius QUS measured by SOS shows potential in fracture discriminative ability where DXA equipment is not available. This study aimed to provide a comprehensive evaluation of the association between radius QUS and fracture risk. A detailed article search was carried out on PubMed, EMBASE, Cochrane Libraries, CNKI, Wan-Fang database, VIP, and SinoMed for studies published between January 1980 and February 2020. We determined the estimated relative risk (RR) for fracture per each radial SOS SD decrease. A meta-analysis of studies was performed under the random-effects model. A total of 16,681 individuals were included in this review. Among the participants, 5892 were male and 10,789 were female. A total of 1296 cases of fragility fracture were included. With each SD decrease in radial SOS, the risk of overall fragility fracture and hip fracture was increased by 21% and 55%, respectively. Particularly, the risk was increased by 32% and 66% for women. The association was even stronger for postmenopausal women. Radius QUS showed great potential as an effective tool for fracture risk evaluation, especially for women.

Change in Quantitative Ultrasound-assessed Speed of Sound as a Function of Age in Women and Men and Association With the Use of Antiresorptive Agents: The Canadian Multicentre Osteoporosis Study

INTRODUCTION

Five-year changes in multisite quantitative ultrasound-assessed speed of sound (SOS in m/s) were studied in a cohort of women and men. The impacts of antiresorptive therapies and menopausal status on SOS were also assessed.

METHODOLOGY

Two SOS assessments, clinical assessments, and comprehensive questionnaires were completed 5 years apart on 509 women and 211 men. Age at first assessment was grouped into: <40 yr, 40-49 yr, 50-59 yr, 60-69 yr, 70-79 yr and 80+ yr. Mean rate of change in SOS at the distal radius and tibia were calculated for each age grouping by sex. SOS changes were stratified by antiresorptive use (yes, no) or menopausal status (premenopausal, postmenopausal, or bilateral oophorectomy).

RESULTS

Mean losses in SOS occurred over the 5 years in almost all age groupings. In women, mean losses in SOS for the <40 yr, 40-49 yr, 50-59 yr, 60-69 yr, 70-79 yr, and 80+ yr age groupings were -59, -83, -107, -92, -80 and -66 (p = 0.30; differences among age groupings) at the radius and -18, -16, -54, -1, -9 and 31 at the tibia (p < 0.05), respectively. In men, mean SOS losses were -101, -56, -69, -67, -83 and -127 at the radius (p = 0.61) and -46, -61, 0, -35, -29, and -26 at the tibia (p = 0.23). At the tibia, women prescribed antiresorptives had a mean increase in SOS (8.6 m/s) whereas untreated participants had a mean loss (-23.0; p < 0.001); there was no significant impact at the distal radius. There were no significant differences in change in SOS among menopausal groups (p > 0.26).

CONCLUSIONS

Mean SOS generally declined over 5 years in all age groupings of both sexes. The consistent mean losses in SOS over the age spans investigated are coincident with increasing fracture risk. Women on antiresorptive therapy had increased mean SOS over the 5-year assessment period at the tibia, whereas untreated women had mean losses in SOS.

Bone Mineral Density and Cortical-Bone Thickness of the Distal Radius Predict Femoral Stem Subsidence in Postmenopausal Women

BACKGROUND

The distal radius is an optional site for evaluation of bone quality in postmenopausal women before cementless total hip arthroplasty. We hypothesized that dual-energy X-ray absorptiometry (DXA) and pulse-echo ultrasonometry of the distal radius may help discriminate subjects at high risk of femoral stem subsidence.

METHODS

A prospective cohort of postmenopausal women with primary hip osteoarthritis underwent total hip arthroplasty with implantation of a parallel-sided femoral stem. Postoperative stem migration was measured using radiostereometric analysis. Preoperatively, subjects had multisite DXA measurement of bone mineral density (BMD) and pulse-echo ultrasonometry of the cortical-bone thickness. The diagnostic abilities of these methods to discriminate <2 mm and ≥2 mm femoral stem subsidence were tested.

RESULTS

The accuracy of the distal radius BMD and cortical-bone thickness of the distal radius were moderate (area under the curve, 0.737 and 0.726, respectively) in discriminating between <2 mm and ≥2 mm stem subsidence. Women with low cortical-bone thickness of the radius were more likely (odds ratio = 6.7; P = .002) to develop stem subsidence ≥2 mm. These subjects had lower total hip BMD (P = .007) and reduced thickness of the medial cortex of the proximal femur (P = .048) with lower middle (P < .001) and distal (P = .004) stem-to-canal fill ratios.

CONCLUSION

Femoral stem stability and resistance to subsidence are sensitive to adequate bone stock and unaltered anatomy. DXA and pulse-echo ultrasonometry of the distal radius may help discriminate postmenopausal women at high risk of stem subsidence.

The use of pulse-echo ultrasound in women with a recent non-vertebral fracture to identify those without osteoporosis and/or a subclinical vertebral fracture: a pilot study

A pilot study on the use of P-EU to identify patients without osteoporosis and/or a subclinical vertebral fracture after a recently sustained non-vertebral fracture (NVF).

INTRODUCTION

Screening with portable devices at emergency departments or plaster rooms could be of interest to limit referrals for dual X-ray absorptiometry (DXA) and vertebral fracture assessment (VFA). We calculated the number of negative tests for osteoporosis and/or subclinical vertebral fractures (VFs) using pulse-echo ultrasonometry (P-UE) at different thresholds.

PATIENTS AND METHODS

In this cross-sectional study, 209 consecutive women of 50-70 years with a recent non-vertebral fracture (NVF) were studied at the Fracture Liaison Service (FLS) of one hospital. All women received DXA/VFA and P-EU (Bindex®) assessments. Various P-EU thresholds (based on the density index (DI, g/cm²)) were analyzed to calculate the best balance between true negative (indeed no osteoporosis and/or subclinical VF) and false negative tests (osteoporosis and/or subclinical VF according to DXA/VFA).

RESULTS

Eighty-three women had osteoporosis (40%) and 17 women at least one VF (8%). Applying the manufacturer's recommended P-EU threshold (DI 0.844 g/cm²) being their proposed cut-off for not having hip osteoporosis resulted in 77 negative tests (37%, 31% true negative and 6% false negative tests). A DI of 0.896 g/cm² resulted in 40 negative tests (19.3%) (38 true negative (18.3%) and 2 false negative tests (1.0%)).

CONCLUSION

The application of P-EU enables the identification of a substantial proportion of women with recent non-vertebral fractures at the FLS who would not need a DXA/VFA referral because they had no osteoporosis and/or subclinical vertebral fractures. The most conservative P-EU threshold resulted in 18.3% true negative tests verified by DXA/VFA against 1% false negative test results.

Monitoring the Setting of Calcium Sulfate Bone-Graft Substitute Using Ultrasonic Backscattering

We report a method to monitor the setting process of bone-graft substitutes (calcium sulfate) using ultrasonic backscattering techniques. Analyzing the backscattered fields using a pulse-echo technique, we show that it is possible to dynamically describe the acoustic properties of the material which are linked to its setting state. Several experiments were performed to control the setting process of calcium sulfate using a 3.5-MHz transducer. The variation of the apparent integrated backscatter (AIB) with time during the setting process is analyzed and compared with measurements of the speed of sound (SOS) and temperature of the sample. The correlation of SOS and AIB allows us to clearly identify two different states of the samples, liquid and solid, in addition to the transition period. Results show that using backscattering analysis, the setting state of the material can be estimated with a threshold of 15 dB. This ultrasonic technique is indeed the first step to develop real-time monitoring systems for time-varying complex media as those present in bone regeneration for dental implantology applications.

Ultrasound-Based Estimates of Cortical Bone Thickness and Porosity Are Associated With Nontraumatic Fractures in Postmenopausal Women: A Pilot Study

Recent ultrasound (US) axial transmission techniques exploit the multimode waveguide response of long bones to yield estimates of cortical bone structure characteristics. This pilot cross-sectional study aimed to evaluate the performance at the one-third distal radius of a bidirectional axial transmission technique (BDAT) to discriminate between fractured and nonfractured postmenopausal women. Cortical thickness (Ct.Th) and porosity (Ct.Po) estimates were obtained for 201 postmenopausal women: 109 were nonfractured (62.6 ± 7.8 years), 92 with one or more nontraumatic fractures (68.8 ± 9.2 years), 17 with hip fractures (66.1 ± 10.3 years), 32 with vertebral fractures (72.4 ± 7.9 years), and 17 with wrist fractures (67.8 ± 9.6 years). The areal bone mineral density (aBMD) was obtained using DXA at the femur and spine. Femoral aBMD correlated weakly, but significantly with Ct.Th (R = 0.23, p < 0.001) and Ct.Po (R = -0.15, p < 0.05). Femoral aBMD and both US parameters were significantly different between the subgroup of all nontraumatic fractures combined and the control group (p < 0.05). The main findings were that (1) Ct.Po was discriminant for all nontraumatic fractures combined (OR = 1.39; area under the receiver operating characteristic curve [AUC] equal to 0.71), for vertebral (OR = 1.96; AUC = 0.84) and wrist fractures (OR = 1.80; AUC = 0.71), whereas Ct.Th was discriminant for hip fractures only (OR = 2.01; AUC = 0.72); there was a significant association (2) between increased Ct.Po and vertebral and wrist fractures when these fractures were not associated with any measured aBMD variables; (3) between increased Ct.Po and all nontraumatic fractures combined independently of aBMD neck; and (4) between decreased Ct.Th and hip fractures independently of aBMD femur. BDAT variables showed comparable performance to that of aBMD neck with all types of fractures (OR = 1.48; AUC = 0.72) and that of aBMD femur with hip fractures (OR = 2.21; AUC = 0.70). If these results are confirmed in prospective studies, cortical BDAT measurements may be considered useful for assessing fracture risk in postmenopausal women. © 2019 American Society for Bone and Mineral Research.

[Diagnostics and treatment of osteoporosis in patients over 65 years old : Current status and future perspectives]

Only one third of all women with osteoporosis over the age of 65 years are adequately treated; therefore, many experience fractures. For men the data are insufficient. Using a newly developed algorithm and based on the current guidelines, the diagnosis and specific treatment of osteoporosis can be easily set up. The differential treatment should be selected in an individualized approach based on the side effect profile of the specific medication. No statistically significant differences were found between most specific osteoporotic drugs in head-to-head comparisons. This article presents an overview of the currently available pharmaceutical and non-pharmaceutical forms of treatment as well as approaches with novel medications and interventions for a better control of osteoporosis.

Healthcare Policy Changes in Osteoporosis Can Improve Outcomes and Reduce Costs in the United States

In the United States, osteoporosis affects over 10 million adults, has high societal costs ($22 billion in 2008), and is currently being underdiagnosed and undertreated. Given an aging population, this burden is expected to rise. We projected the fracture burden in US women by modeling the expected demographic shift as well as potential policy changes. With the anticipated population aging and growth, annual fractures are projected to increase from 1.9 million to 3.2 million (68%), from 2018 to 2040, with related costs rising from $57 billion to over $95 billion. Policy‐driven expansion of case finding and treatment of at‐risk women could lower this burden, preventing 6.1 million fractures over the next 22 years while reducing payer costs by $29 billion and societal costs by $55 billion. Increasing use of osteoporosis‐related interventions can reduce fractures and result in substantial cost‐savings, a rare and fortunate combination given the current landscape in healthcare policy. © 2019 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

Emerging Technologies in Osteoporosis Diagnosis

Osteoporosis is a disease defined by diminished bone mass, often resulting in debilitating fragility fractures. As hand surgeons who care for patients with fractures of the distal radius and proximal humerus often related to osteoporosis, it is critical to understand the diagnostic modalities used in the workup of decreased bone density. Although the current reference standard for diagnosing osteoporosis is dual x-ray absorptiometry, this technique has notable drawbacks such as the inability to provide a 3-dimensional image or information about bone microstructure. These limitations result in underdiagnosis of osteoporosis. Other emerging imaging technologies such as quantitative computed tomography, high-resolution peripheral quantitative computed tomography, and quantitative ultrasound offer distinct advantages over dual x-ray absorptiometry. Among these advantages are the production of 3-dimensional images, information about cortical and trabecular microstructure, and reduced radiation exposure. It is essential for hand surgeons to be aware of these evolving diagnostic modalities and the benefits that they offer to provide the best care for patients with osteoporosis.

Radiofrequency echographic multispectrometry compared with dual X-ray absorptiometry for osteoporosis diagnosis on lumbar spine and femoral neck

An innovative, non-ionizing technique to diagnose osteoporosis on lumbar spine and femoral neck was evaluated through a multicenter study involving 1914 women. The proposed method showed significant agreement with reference gold standard method and, therefore, a potential for early osteoporosis diagnoses and possibly improved patient management.

INTRODUCTION

To assess precision (i.e., short term intra-operator precision) and diagnostic accuracy of an innovative non-ionizing technique, REMS (Radiofrequency Echographic Multi Spectrometry), in comparison with the clinical gold standard reference DXA (dual X-ray absorptiometry), through an observational multicenter clinical study.

METHODS

In a multicenter cross-sectional observational study, a total of 1914 postmenopausal women (51-70 years) underwent spinal (n = 1553) and/or femoral (n = 1637) DXA, according to their medical prescription, and echographic scan of the same anatomical sites performed with the REMS approach. All the medical reports (DXA and REMS) were carefully checked to identify possible errors that could have caused inaccurate measurements: erroneous REMS reports were excluded, whereas erroneous DXA reports were re-analyzed where possible and otherwise excluded before assessing REMS accuracy. REMS precision was independently assessed.

RESULTS

In the spinal group, quality assessment on medical reports produced the exclusion of 280 patients because of REMS errors and 78 patients because of DXA errors, whereas 296 DXA reports were re-analyzed and corrected. Analogously, in the femoral group there were 205 exclusions for REMS errors, 59 exclusions for DXA errors, and 217 re-analyzed DXA reports. In the resulting dataset (n = 1195 for spine, n = 1373 for femur) REMS outcome showed a good agreement with DXA: the average difference in bone mineral density (BMD, bias ± 2SD) was -0.004 ± 0.088 g/cm² for spine and - 0.006 ± 0.076 g/cm² for femur. Linear regression showed also that the two methods were well correlated: standard error of the estimate (SEE) was 5.3% for spine and 5.8% for femur. REMS precision, expressed as RMS-CV, was 0.38% for spine and 0.32% for femur.

CONCLUSIONS

The REMS approach can be used for non-ionizing osteoporosis diagnosis directly on lumbar spine and femoral neck with a good level of accuracy and precision. However, a more rigorous operator training is needed to limit the erroneous acquisitions and to ensure the full clinical practicability.

Cost-effectiveness of pulse-echo ultrasonometry in osteoporosis management

Purpose

Osteoporosis is asymptomatic morbidity of the elderly which develops slowly over several years. Osteoporosis diagnosis has typically involved Fracture Risk Assessment (FRAX) followed by dual energy X-ray absorptiometry (DXA) in specialist care. Point-of-care pulse-echo ultrasound (PEUS) was developed to overcome DXA-related access issues and to enable faster fracture prevention treatment (FPT) initiation. The objective of this study was to evaluate the cost-effectiveness of two proposed osteoporosis management (POMs: FRAX→PEUS-if-needed→DXA-if-needed→FPT-if-needed) pathways including PEUS compared with the current osteoporosis management (FRAX→DXA-if-needed→FPT-if-needed).

Materials and methods

Event-based probabilistic cost–utility model with 10-year duration for osteoporosis management was developed. The model consists of a decision tree for the screening, testing, and diagnosis phase and is followed by a Markov model for the estimation of incidence of four fracture types and mortality. Five clinically relevant patient cohorts (potential primary FPT in women aged 75 or 85 years, secondary FPT in women aged 65, 75, or 85 years) were modeled in the Finnish setting. Generic alendronate FPT was used for those diagnosed with osteoporosis, including persistence overtime. Discounted (3%/year) incremental cost-effectiveness ratio was the primary outcome. Discounted quality-adjusted life-years (QALYs), payer costs (year 2016 value) at per patient and population level, and cost-effectiveness acceptability frontiers were modeled as secondary outcomes.

Results

POMs were cost-effective in all patient subgroups with noteworthy mean per patient cost savings of €121/76 (ranges €107–132/52–96) depending on the scope of PEUS result interpretation (test and diagnose/test only, respectively) and negligible differences in QALYs gained in comparison with current osteoporosis management. In the cost-effectiveness acceptability frontiers, POMs had 95%–100% probability of cost-effectiveness with willingness to pay €24,406/QALY gained. The results were robust in sensitivity analyses. Even when assuming a high cost of PEUS (up to €110/test), POMs were cost-effective in all cohorts.

Conclusion

The inclusion of PEUS to osteoporosis management pathway was cost-effective.

Pulse-echo ultrasound method for detection of post-menopausal women with osteoporotic BMD

We lack effective diagnostics of osteoporosis at the primary health care level. An ultrasound device was used to identify subjects in the osteoporotic range as defined by DXA. A case finding strategy combining ultrasound results with DXA measurements for patients with intermediate ultrasound results is presented.

INTRODUCTION

We lack effective screening and diagnostics of osteoporosis at primary health care. In this study, a pulse-echo ultrasound (US) method is investigated for osteoporosis screening.

METHODS

A total of 1091 Caucasian women (aged 50-80 years) were recruited for the study and measured with US in the tibia and radius. This method measures cortical thickness and provides an estimate of bone mineral density (BMD) and density index (DI). BMD assessment of the hip was available for 988 women. A total of 888 women had one or more risk factors for osteoporosis (OP _susp ), and 100 women were classified healthy. Previously determined thresholds for the DI were evaluated for assessment of efficacy of the technique to detect hip BMD at osteoporotic range (T-score at or below - 2.5).

RESULTS

In the OP _susp group, the application of thresholds for the DI showed that approximately 32% of the subjects would require an additional DXA measurement. The multi-site ultrasound (US) measurement-based DI showed 93.7% sensitivity and 81.6% specificity, whereas the corresponding values for single-site US measurement-based DI were 84.7 and 82.0%, respectively. The ultrasound measurements showed a high negative predictive value 97.7 to 99.2% in every age decade examined (ages 50-59, 60-69, 70-79 years).

CONCLUSIONS

The study data demonstrate that a strategy of combining ultrasound measurement with added DXA measurements in cases with intermediate ultrasound results (about 30%) can be useful for identifying subjects at risk for a low bone mineral density in the osteoporotic range.

Quantitative Ultrasound (QUS) in the Management of Osteoporosis and Assessment of Fracture Risk

The use of quantitative ultrasound (QUS) for a variety of skeletal sites, associated with the absence of technology-specific guidelines, has created uncertainty with respect to the application of QUS results to the management of individual patients in clinical practice. However, when prospectively validated (this is not the case for all QUS devices and skeletal sites), QUS is a proven, low-cost, and readily accessible alternative to dual-energy X-ray absorptiometry (DXA) measurements of bone mineral density (BMD) for the assessment of fracture risk. Indeed, the clinical use of QUS to identify subjects at low or high risk of osteoporotic fracture should be considered when central DXA is unavailable. Furthermore, the use of QUS in conjunction with clinical risk factors (CRF),allows for the identification of subjects who have a low and high probability of osteoporotic fracture. Device- and parameter-specific thresholds should be developed and cross-validated to confirm the concurrent use of QUS and CRF for the institution of pharmacological therapy and monitoring therapy.

Porosity predicted from ultrasound backscatter using multivariate analysis can improve accuracy of cortical bone thickness assessment

A rapidly growing area of interest in quantitative ultrasound assessment of bone is to determine cortical bone porosity from ultrasound backscatter. Current backscatter analyses are based on numerical simulations, while there are no published reports of successful experimental measurements. In this study, multivariate analysis is applied to ultrasound reflections and backscatter to predict cortical bone porosity. The porosity is then applied to estimate cortical bone radial speed of sound (SOS) and thickness using ultrasound backscatter signals obtained at 2.25 and 5 MHz center frequencies from cortical bone samples (n = 43) extracted from femoral diaphyses. The study shows that the partial least squares regression technique could be employed to successfully predict (R²= 0.71-0.73) cortical porosity. It is found that this multivariate approach can reduce uncertainty in pulse-echo assessment of cortical bone thickness from 0.220 to 0.045 mm when porosity based radial SOS was applied, instead of a constant value from literature. Upon further validation, accurate estimation of cortical bone porosity and thickness may be applied as a financially viable option for fracture risk assessment of individuals.