Competitive amperometric immunosensor based on covalent linking of a protein conjugate to dendrimer-functionalised nanogold substrate for the determination of 2,4,6-trinitrotoluene

Straightforward fabrication of electrochemical aptasensors with outstanding antifouling performance

Self-assembled monolayers (SAMs) are popular tools for many different applications - SAMs of commercially available chemicals that convincingly inhibit unspecific binding for electrochemical sensors, however, have yet to be developed. While adsorption of foulants prohibits the reliable analysis of biological samples, unspecific binding of the analyte similarly impedes the investigation of binding characteristics from buffer solutions. In this communication, diglycolamine is introduced for the modification of electrodes with outstanding antifouling performance. The presented sensor design, solely consisting of diglycolamine and an aptamer of choice, convinces with its ease of preparation, low cost, and, most importantly, an exceptional specificity. The latter was found to rely on a gentle but potent cleaning of the electrodes, as only our optimized cleaning procedure granted the diglycolamine layer its excellent fouling minimization performance, while literature standard protocols failed to do so. Each step of the sensor fabrication protocol was optimized by electrochemical impedance spectroscopy, while square-wave voltammetry, surface-enhanced Raman spectroscopy, and zeta potential measurement were performed for further characterization. The presented approach of surface modification with diglycolamine is a versatile method applicable not just to electrochemical measurements, but to a variety of other detection techniques, too, and has the potential to change the way we investigate binding characteristics and fabricate sensors for the analysis of complex biological samples.

Fast Detection of 2,4,6-Trinitrotoluene (TNT) at ppt Level by a Laser-Induced Immunofluorometric Biosensor

The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports venues, theaters, and other large buildings. Security in these environments can be achieved by different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of the explosive 2,4,6-trinitrotoluene (TNT), some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds. The consumption of the labeled antibody is surprisingly low: 1 mg of the reagent would be sufficient for more than one year of continuous biosensor operation.

Dendrimers as Soft Nanomaterials for Electrochemical Immunosensors

Electrochemical immunosensors are antibody-based affinity biosensors with a high impact on clinical, environmental, food, and pharmaceutical analysis. In general, the analytical performance of these devices is critically determined by the materials and reagents used for their construction, signal production and amplification. Dendrimers are monodisperse and highly branched polymers with three-dimensional structures widely employed as “soft” nanomaterials in electrochemical immunosensor technology. This review provides an overview on the state-of-the-art in dendrimer-based electrochemical immunosensors, focusing on those using polyamidoamine and poly (propylene imine) dendrimers. Special emphasis is given to the most original methods recently reported for the construction of immunosensor architectures incorporating dendrimers, as well as to novel sensing approaches based on dendrimer-assisted signal enhancement strategies.

Competitive amperometric immunosensor for determination of p53 protein in urine with carbon nanotubes/gold nanoparticles screen-printed electrodes: A potential rapid and noninvasive screening tool for early diagnosis of urinary tract carcinoma

Since p53 protein has become recognized biomarker for both diagnostic and therapeutic purposes in oncological diseases with particular relevance for bladder cancer, it is highly desirable to search for a novel sensing tool for detecting the patient's p53 level at the early stage. Here we report the first study on the development and validation of a novel disposable competitive amperometric immunosensor for determination of p53 protein at subnanomolar levels, based on p53 immobilization on gold nanoparticles/carbon nanotubes modified screen-printed carbon electrodes. The assay protocol requires the use of single anti-p53 mouse monoclonal antibody (DO-7 clone), able to recognize both wild-type and mutant p53. The developed immunosensor as well as the protocol of the electrochemical immunoassay were optimized by means of an experimental design procedure to assess the suitability of the device to be validated and applied for the determination of p53 in untreated and undiluted urine samples. It was found that the developed competitive immunodevice was able to achieve wide linear range detection of wild-type p53 from 20 pM to 10 nM with a low detection limit of 14 pM in synthetic urine samples, suggesting the sensor's capability of working in a complex sample matrix. The excellent performance results also in terms of selectivity, trueness and precision, coupled with the advantages of an easy preparation and low-cost assay in contrast to other methods which require very complex, time-consuming and costly nanostructured architectures, makes the developed competitive immunosensor an analytically robust diagnostic tool, valuable for implementation of screening and follow-up programs in patients with urologic malignancies.

Advances in explosives analysis--part I: animal, chemical, ion, and mechanical methods

The number and capability of explosives detection and analysis methods have increased substantially since the publication of the Analytical and Bioanalytical Chemistry special issue devoted to Explosives Analysis (Moore and Goodpaster, Anal Bioanal Chem 395(2):245-246, 2009). Here we review and critically evaluate the latest (the past five years) important advances in explosives detection, with details of the improvements over previous methods, and suggest possible avenues towards further advances in, e.g., stand-off distance, detection limit, selectivity, and penetration through camouflage or packaging. The review consists of two parts. This part, Part I, reviews methods based on animals, chemicals (including colorimetry, molecularly imprinted polymers, electrochemistry, and immunochemistry), ions (both ion-mobility spectrometry and mass spectrometry), and mechanical devices. Part II will review methods based on photons, from very energetic photons including X-rays and gamma rays down to the terahertz range, and neutrons.

New competitive dendrimer-based and highly selective immunosensor for determination of atrazine in environmental, feed and food samples: the importance of antibody selectivity for discrimination among related triazinic metabolites

A new voltammetric competitive immunosensor selective for atrazine, based on the immobilization of a conjugate atrazine-bovine serum albumine on a nanostructured gold substrate previously functionalized with poliamidoaminic dendrimers, was realized, characterized, and validated in different real samples of environmental and food concern. Response of the sensor was reliable, highly selective and suitable for the detection and quantification of atrazine at trace levels in complex matrices such as territorial waters, corn-cultivated soils, corn-containing poultry and bovine feeds and corn flakes for human use. Selectivity studies were focused on desethylatrazine, the principal metabolite generated by long-term microbiological degradation of atrazine, terbutylazine-2-hydroxy and simazine as potential interferents. The response of the developed immunosensor for atrazine was explored over the 10(-2)-10(3) ng mL(-1) range. Good sensitivity was proved, as limit of detection and limit of quantitation of 1.2 and 5 ng mL(-1), respectively, were estimated for atrazine. RSD values <5% over the entire explored range attested a good precision of the device.