Electroanalysis of single-nucleotide polymorphism by hairpin DNA architectures

Double-Stranded DNA Immobilized in Lying-Flat and Upright Orientation on a PNIPAm-Coated Surface: A Theoretical Study

Surface-immobilized double-stranded DNA (dsDNA) in upright orientation plays an important role in optimizing and understanding DNA-based nanosensors and nanodevices. However, it is difficult to regulate the surface density of upright DNA due to the fact that DNA usually stands vertically at a high packing density but may lie down at a low packing density. We herein report dsDNA immobilized in upright orientation on a poly(N-isopropylacrylamide) (PNIPAm)-coated surface in theory. The theoretical results reveal that the angle of upright DNA relative to the surface is larger than that of DNA immobilized on the bare surface caused by the lying-flat DNA under proper PNIPAm surface coverage at 45 °C. The surface density of upright DNA is significantly influenced by DNA concentration and DNA length. It is envisioned that the density-regulated DNA molecules immobilized in upright orientation in the present work are well suited to bottom-up construction of complex DNA-based nanostructures and nanodevices.

Detection of E.coli 23S rRNA by electrocatalytic "off-on" DNA beacon assay with femtomolar sensitivity

Prevention of food spoilage, environmental bio-contamination, and pathogenic infections requires rapid and sensitive bacterial detection systems. Among microbial communities, the bacterial strain of Escherichia coli is most widespread, with pathogenic and non-pathogenic strains being biomarkers of bacterial contamination. Here, we have developed a fM-sensitive, simple, and robust electrocatalytically-amplified assay facilitating specific detection of E.coli 23S ribosomal rRNA, in the total RNA sample, after its site-specific cleavage by RNase H enzyme. Gold screen-printed electrodes (SPE) were electrochemically pre-treated to be productively modified with a methylene-blue (MB) - labelled hairpin DNA probes, which hybridization with the E. coli-specific DNA placed MB in the top region of the DNA duplex. The formed duplex acted as an electrical wire, mediating electron transfer from the gold electrode to the DNA-intercalated MB, and further to ferricyanide in solution, enabling its electrocatalytic reduction otherwise impeded on the hairpin-modified SPEs. The assay facilitated 20 min 1 fM detection of both synthetic E. coli DNA and 23S rRNA isolated from E.coli (equivalent to 15 CFU mL^-1), and can be extended to fM analysis of nucleic acids isolated from any other bacteria.

Hairpin DNA-Mediated isothermal amplification (HDMIA) techniques for nucleic acid testing

Nucleic acid detection is of great importance in a variety of areas, from life science and clinical diagnosis to environmental monitoring and food safety. Unfortunately, nucleic acid targets are always found in trace amounts and their response signals are difficult to be detected. Amplification mechanisms are then practically needed to either duplicate nucleic acid targets or enhance the detection signals. Polymerase chain reaction (PCR) is one of the most popular and powerful techniques for nucleic acid analysis. But the requirement of costly devices for precise thermo-cycling procedures in PCR has severely hampered the wide applications of PCR. Fortunately, isothermal molecular reactions have emerged as promising alternatives. The past decade has witnessed significant progress in the research of isothermal molecular reactions utilizing hairpin DNA probes (HDPs). Based on the nucleic acid strand interaction mechanisms, the hairpin DNA-mediated isothermal amplification (HDMIA) techniques can be mainly divided into three categories: strand assembly reactions, strand decomposition reactions, and strand creation reactions. In this review, we introduce the basics of HDMIA methods, including the sensing principles, the basic and advanced designs, and their wide applications, especially those benefiting from the utilization of G-quadruplexes and nanomaterials during the past decade. We also discuss the current challenges encountered, highlight the potential solutions, and point out the possible future directions in this prosperous research area.

Molecular diagnostic of toxigenic Corynebacterium diphtheriae strain by DNA sensor potentially suitable for electrochemical point-of-care diagnostic

The presented study is focused on the development of electrochemical genosensor for detection of tox gene fragment of toxigenic Corynebacterium diphtheriae strain. Together with our previous studies it fulfils the whole procedure for fast and accurate diagnostic of diphtheria at its early stage of infection with the use of electrochemical methods. The developed DNA sensor potentially can be used in more sophisticated portable device. After the electrochemical stem-loop probe structure optimization the conditions for real asymmetric PCR (aPCR) product detection were selected. As was shown it was crucial to optimize the magnesium and organic solvent concentrations in detection buffer. Under optimal conditions it was possible to selectively detect as low as 20.8 nM of complementary stand in 5 min or 0.5 nM in 30 min with sensitivity of 12.81 and 0.24 1⋅μM^-1 respectively. The unspecific biosensor response was elucidated with the use of new electrode blocking agent, diethyldithiocarbamate. Its application in electrochemical genosensors lead to significant higher current values and the biosensor response even in conditions with magnesium ion depletion. The developed biosensor selectivity was examined using samples containing genetic material originated from a number of non-target bacterial species which potentially can be present in the human upper respiratory tract.

Design Strategies for Electrochemical Aptasensors for Cancer Diagnostic Devices

Improved outcomes for many types of cancer achieved during recent years is due, among other factors, to the earlier detection of tumours and the greater availability of screening tests. With this, non-invasive, fast and accurate diagnostic devices for cancer diagnosis strongly improve the quality of healthcare by delivering screening results in the most cost-effective and safe way. Biosensors for cancer diagnostics exploiting aptamers offer several important advantages over traditional antibodies-based assays, such as the in-vitro aptamer production, their inexpensive and easy chemical synthesis and modification, and excellent thermal stability. On the other hand, electrochemical biosensing approaches allow sensitive, accurate and inexpensive way of sensing, due to the rapid detection with lower costs, smaller equipment size and lower power requirements. This review presents an up-to-date assessment of the recent design strategies and analytical performance of the electrochemical aptamer-based biosensors for cancer diagnosis and their future perspectives in cancer diagnostics.

Determination of the binding site size of hexaammineruthenium(iii) inside monolayers of DNA on gold

Hexaammineruthenium(iii), RuHex³⁺, is a DNA-binding metal complex that is widely used as a redox marker for the indirect determination of DNA coverage at the electrode surface. The conversion of electrochemically quantifiable surface excess of RuHex³⁺ into DNA surface coverage requires the knowledge of the binding site size of RuHex³⁺ (s). Traditionally, s on surface-immobilized DNA has been assumed to be equivalent to that on solution-phase DNA, which was experimentally determined in previous studies. Nevertheless, the different local microenvironments existing inside DNA monolayers in comparison to that in bulk solutions cast doubt on the validity of this assumption. In this report, we used electrochemical techniques to investigate s on surface-immobilized DNA. The values of s inside the DNA monolayers were found to be significantly smaller than that reported on solution-phase DNA. Besides, s was found to depend on the DNA packing density and became larger by increasing the DNA surface coverage or hybridizing the surface-tethered DNAs with complementary strands. Our data indicate that the RuHex³⁺ method, in which an s value of 3 nucleotides is used for the conversion of RuHex³⁺ to DNA surface coverage, does not always give reliable results.

Targeted Detection of Single-Nucleotide Variations: Progress and Promise

Advances in nucleic acid sequencing and genotyping technologies have facilitated the discovery of an increasing number of single-nucleotide variations (SNVs) associated with disease onset, progression, and response to therapy. The reliable detection of such disease-specific SNVs can ensure timely and effective therapeutic action, enabling precision medicine. This has driven extensive efforts in recent years to develop novel methods for the fast and cost-effective analysis of targeted SNVs. In this Review, we highlight the most recent and significant advances made toward the development of such methodologies.

Zeptomole Biosensing of DNA with Flexible Selectivity Based on Acoustic Levitation of a Single Microsphere Binding Gold Nanoparticles by Hybridization

A novel scheme for DNA sensing at the zeptomole level is presented, based on the levitation of a single microsphere in a combined acoustic-gravitational (CAG) field. The levitation of a microsphere in the field is predominantly determined by its density. Capture and reporter probe DNAs are anchored on poly(methyl methacrylate) microsphere (PMMA) and gold nanoparticles (AuNPs), respectively, and a target DNA induces the binding of AuNPs on PMMA. This interparticle sandwich DNA-hybridization induces density increase in PMMA, which is detected as a shift in the levitation coordinate in the CAG field. The reporter DNAs are designed based on base-pair (bp) number selectivity, which is evaluated using direct interparticle hybridization between DNA-bound PMMA and complementary DNA-anchored AuNPs. Interestingly, the bp-number selectivity can be enlarged by lowering the reactant concentrations. Thus, the threshold bp, at which no density change is detected, can be adjusted by controlling the reactant concentrations. This strategy is extended to the sensing of HIV-2 DNA and single nucleotide polymorphism (SNP) detection of the KRAS gene by sandwich hybridization. In SNP detection, the present method selectively distinguishes wild-type DNA from mutant DNA differing by one nucleotide in the 21-nucleotide sequence by optimizing the lengths of probe DNAs and particle concentrations. This approach allows the detection of 1000 DNA molecules.

DNA Electrochemistry and Electrochemical Sensors for Nucleic Acids

Sensitive, specific, and fast analysis of nucleic acids (NAs) is strongly needed in medicine, environmental science, biodefence, and agriculture for the study of bacterial contamination of food and beverages and genetically modified organisms. Electrochemistry offers accurate, simple, inexpensive, and robust tools for the development of such analytical platforms that can successfully compete with other approaches for NA detection. Here, electrode reactions of DNA, basic principles of electrochemical NA analysis, and their relevance for practical applications are reviewed and critically discussed.

A Single Electrochemical Probe Used for Analysis of Multiple Nucleic Acid Sequences

Electrochemical hybridization sensors have been explored extensively for analysis of specific nucleic acids. However, commercialization of the platform is hindered by the need for attachment of separate oligonucleotide probes complementary to a RNA or DNA target to an electrode's surface. Here we demonstrate that a single probe can be used to analyze several nucleic acid targets with high selectivity and low cost. The universal electrochemical four-way junction (4J)-forming (UE4J) sensor consists of a universal DNA stem-loop (USL) probe attached to the electrode's surface and two adaptor strands (m and f) which hybridize to the USL probe and the analyte to form a 4J associate. The m adaptor strand was conjugated with a methylene blue redox marker for signal ON sensing and monitored using square wave voltammetry. We demonstrated that a single sensor can be used for detection of several different DNA/RNA sequences and can be regenerated in 30 seconds by a simple water rinse. The UE4J sensor enables a high selectivity by recognition of a single base substitution, even at room temperature. The UE4J sensor opens a venue for a re-useable universal platform that can be adopted at low cost for the analysis of DNA or RNA targets.

Nonequilibrium Hybridization Enables Discrimination of a Point Mutation within 5-40 °C

Detection of point mutations and single nucleotide polymorphisms in DNA and RNA has a growing importance in biology, biotechnology, and medicine. For the application at hand, hybridization assays are often used. Traditionally, they differentiate point mutations only at elevated temperatures (>40 °C) and in narrow intervals (ΔT = 1-10 °C). The current study demonstrates that a specially designed multistranded DNA probe can differentiate point mutations in the range of 5-40 °C. This unprecedentedly broad ambient-temperature range is enabled by a controlled combination of (i) nonequilibrium hybridization conditions and (ii) a mismatch-induced increase of equilibration time in respect to that of a fully matched complex, which we dub "kinetic inversion".

A sandwich-like strategy for the label-free detection of oligonucleotides by surface plasmon fluorescence spectroscopy (SPFS)

Cutting surface-bound optical molecular beacons results in a sandwich-like detection strategy with lower background fluorescence.

For the detection of oligonucleotides a sandwich-like detection strategy has been developed by which the background fluorescence is significantly lowered in comparison with surface-bound molecular beacons. Surface bound optical molecular beacons are DNA hairpin structures comprising a stem and a loop. The end of the stem is modified with a fluorophore and a thiol anchor for chemisorption on gold surfaces. In the closed state the fluorophore is in close proximity to the gold surface, and most of the fluorescence is quenched. After hybridization with a target the hairpin opens, the fluorophore and surface become separated, and the fluorescence drastically increases. Using this detection method the sensitivity is limited by the difference in the fluorescence intensity in the closed and open state. As the background fluorescence is mainly caused by non-quenched fluorophores, a strategy to reduce the background fluorescence is to cut the beacon in two halves. First a thiolated ssDNA capture probe strand (first half) is chemisorbed to a gold surface together with relatively short thiol spacers. Next the target is hybridized by one end to the surface-anchored capture probe and by the other to a fluorophore-labeled reporter probe DNA (second half). The signal readout is done by surface plasmon fluorescence spectroscopy (SPFS). Using this detection strategy the background fluorescence can be significantly lowered, and the detection limit is lowered by more than one order of magnitude. The detection of a target takes only a few minutes and the sensor chips can be used for multiple detection steps without a significant decrease in performance.

Hairpin-based DNA electrochemical sensor for selective detection of a repetitive and structured target codifying a gliadin fragment

High selectivity of genosensors is crucial for certain applications such as those involving species with high genetic variability. This is an unresolved problem when dealing with long target sequences that is further complicated when the target contains repetitive sequence domains. As a model for this situation, the problem of detecting gluten in food with identification of the source is studied. In order to discriminate the specific DNA sequence that encodes the wheat prolamin (gliadin) from rye and barley prolamins, the exquisite selectivity of a rationally designed hairpin capture probe is proposed and compared to a nonstructured capture probe. An electrochemical sandwich assay is proposed, involving capture probes chemisorbed on Au surfaces and biotinylated-signaling probes in combination with streptavidin-peroxidase labeling conjugates. As a result, a genosensor with similar sensitivity to that observed with linear probes but with complete specificity against closely related species was achieved. The surface-attached DNA stem-loop yields a device capable of accurately discriminating wheat DNA from rye and barley with a limit of detection of 1 nM.

The detection of multiple DNA targets with a single probe using a conformation-sensitive acoustic sensor

Acoustic sensing of DNA targets using a single probe that produces hybridization products of different conformations.

Bioanalytical approaches for the detection of single nucleotide polymorphisms by Surface Plasmon Resonance biosensors

The mapping of specific single nucleotide polymorphisms (SNPs) in patients' genome is a main goal in theranostics, aiming to the development of therapies based on personalized medicine. In this review, Surface Plasmon Resonance (SPR) and Surface Plasmon Resonance imaging (SPRi) biosensors applied to the recognition of SNPs were reviewed, since these technologies are emerging in clinical diagnosis as powerful tools thanks to their analytical features, mainly the real-time and label-free monitoring based on array format for parallel analysis. Since the literature is heterogeneous, a critical classification and a systemic comparison of the analytical performances of published methods were here reviewed on the basis of the analytical strategy and the assay design. In particular, the use of helping agents (i.e. proteins, nanoparticles (NPs), intercalating agents) or artificial DNAs, often coupled to SPR to achieve allele discrimination and/or enhanced sensitivity, were here revised and classified. Finally, the real suitability of SPR biosensors to clinical diagnostics for SNPs detection was addressed by comparing their features and performances with those of other biosensors based on other techniques (e.g. electrochemical biosensors).