Interferences from oxygen reduction reactions in bioelectroanalytical measurements: the case study of nitrate and nitrite biosensors

An engineered lactate oxidase based electrochemical sensor for continuous detection of biomarker lactic acid in human sweat and serum

Lactate levels in humans reveal intensity and duration of exertion and provide a critical readout for the severity of life-threatening illnesses such as pediatric sepsis. Using the lactate oxidase enzyme (Lox) from Aerococcus viridians, we demonstrated its functionality for lactate electrochemical sensing in physiological fluids in a lab setting. The structure and dynamics of LOx were validated by crystallography, X-ray scattering, and hydroxyl radical protein footprinting. This provided a validated protein template for understanding and designing an enzyme-based electrochemical sensing elements. Using this template, LOx enzyme variants were generated and compared. Comparison of the variants demonstrates that one exhibits effective lactate sensing at significantly reduced operating voltages. Additionally, we demonstrate that the four hexahistidine-tags on each enzyme tetramer are sufficient for immobilization to create a durable, functional sensor, with no need for a covalent attachment, enabling self-immobilization and eliminating the need for additional immobilization steps. The functionality of the LOx enzyme variants was verified at physiological lactate concentrations in both human serum (0-4 mM) and artificial sweat (0-100 mM) using 3-electrode setups for analysis of the three variants in parallel. Accuracy of measurement in both artificial sweat and human serum were high. Employing a microfluidic flow cell, we successfully monitored varying lactate levels in physiological fluids continuously over a 2h period. Overall, this optimized LOx enzyme, which self-immobilizes onto gold sensing electrodes, facilitates efficient and reliable lactate detection and continuous monitoring at reduced operating voltages suitable for further development towards commercial use.

Nitrite anodic oxidation at Ni(II)/Ni(III)-decorated mesoporous SnO2 and its analytical applications

Hydrothermally formed mesoporous SnO2 was used as a support for nickel chemical deposition and, after subsequent thermal treatment, a high specific surface area (36 m2 g-1) Ni/SnO2 material was obtained. XPS analysis has shown that in the Sn 3d region the spectrum is similar to that of pristine SnO2, whereas Ni species are present on the surface as NiO, Ni2O3 and Ni(OH)2. Mixing Ni/SnO2 with a small amount of Black Pearls (BP) leads to a significant enhancement of the resulting Ni/SnO2-BP composite activity for nitrite anodic oxidation, presumably due to the higher surface area (115 m2 g-1), to better electrical conductivity and to a certain contribution of the BP to an increase in surface density of the active sites. Ni/SnO2-BP also outperforms pristine BP (in terms of Tafel slopes and electron-transfer rates), most likely due to the fact that the Ni(II)/Ni(III) couple can act as an electrocatalyst for nitrite oxidation. A voltammetric method is proposed for the determination of nitrite, over a concentration range of three orders of magnitude (0.05 to 20 mM), with good reproducibility, high stability and excellent sensitivity. The high upper limit of the dynamic range of the analytically useful response might provide a basis for the reliable quantification of nitrite in wastewater.

Recent advances in sensors for electrochemical analysis of nitrate in food and environmental matrices

Nitrate is one of the most common contaminants in food and the environment and mainly arises from intense human activities. Electrochemical sensors have been considered as one of the most promising analytical tools for the rapid detection of nitrate in food and environmental matrices due to their quick response, high sensitivity, ease of operation and miniaturisation, and low sample and power consumption. In this review, we summarise advances in sensors for electrochemical analysis of nitrate over the past decade. We also discuss the application of electrochemical sensing systems for the determination of nitrate in the matrices of fresh water, seawater, food, soil and particulate matter.

A fully protected hydrogenase/polymer-based bioanode for high-performance hydrogen/glucose biofuel cells

Hydrogenases with Ni- and/or Fe-based active sites are highly active hydrogen oxidation catalysts with activities similar to those of noble metal catalysts. However, the activity is connected to a sensitivity towards high-potential deactivation and oxygen damage. Here we report a fully protected polymer multilayer/hydrogenase-based bioanode in which the sensitive hydrogen oxidation catalyst is protected from high-potential deactivation and from oxygen damage by using a polymer multilayer architecture. The active catalyst is embedded in a low-potential polymer (protection from high-potential deactivation) and covered with a polymer-supported bienzymatic oxygen removal system. In contrast to previously reported polymer-based protection systems, the proposed strategy fully decouples the hydrogenase reaction form the protection process. Incorporation of the bioanode into a hydrogen/glucose biofuel cell provides a benchmark open circuit voltage of 1.15 V and power densities of up to 530 µW cm-2 at 0.85 V.

Electrocatalytic Reduction of Nitrate Using Magnéli Phase TiO2 Reactive Electrochemical Membranes Doped with Pd-Based Catalysts

This research focused on synthesis, characterization, and application of point-of-use catalytic reactive electrochemical membranes (REMs) for electrocatalytic NO₃^- reduction. Deposition of Pd-Cu and Pd-In catalysts to the REMs produced catalytic REMs (i.e., Pd-Cu/REM and Pd-In/REM) that were active for NO₃^- reduction. Optimal performance was achieved with a Pd-Cu/REM and upstream counter electrode, which reduced NO₃^- from 1.0 mM to below the EPAs regulatory MCL (700 μM) in a single pass through the REM (residence time ∼2 s), obtaining product selectivity of <2% toward NO₂^-/NH₃. Nitrate reduction was not affected by dissolved oxygen and carbonate species and only slightly decreased in a surface water sample due to Ca²⁺ and Mg²⁺ scaling. Energy consumption to treat surface water was 1.1 to 1.3 kWh mol^-1 for 1 mM NO₃^- concentrations, and decreased to 0.19 and 0.12 kWh mol^-1 for 10 and 100 mM NaNO₃ solutions, respectively. Electrocatalytic reduction kinetics were shown to be an order of magnitude higher than catalytic NO₃^- reduction kinetics. Conversion of up to 67% of NO₃^-, with low NO₂^- (0.7-11 μM) and NH₃ formation (<10 μM), and low energy consumption obtained in this study suggest that Pd-Cu/REMs are a promising technology for distributed water treatment.

Bioelectrocatalytic and electrochemical cascade for phosphate sensing with up to 6 electrons per analyte molecule

Despite the availability of numerous electroanalytical methods for phosphate quantification, practical implementation in point-of-use sensing remains virtually nonexistent because of interferences from sample matrices or from atmospheric O₂. In this work, phosphate determination is achieved by the purine nucleoside phosphorylase (PNP) catalyzed reaction of inosine and phosphate to produce hypoxanthine which is subsequently oxidized by xanthine oxidase (XOx), first to xanthine and then to uric acid. Both PNP and XOx are integrated in a redox active Os-complex modified polymer, which not only acts as supporting matrix for the bienzymatic system but also shuttles electrons from the hypoxanthine oxidation reaction to the electrode. The bienzymatic cascade in this second generation phosphate biosensor selectively delivers four electrons for each phosphate molecule present. We introduced an additional electrochemical process involving uric acid oxidation at the underlying electrode. This further enhances the anodic current (signal amplification) by two additional electrons per analyte molecule which mitigates the influence of electrochemical interferences from the sample matrix. Moreover, while the XOx catalyzed reaction is sensitive to O₂, the uric acid production and therefore the delivery of electrons through the subsequent electrochemical process are independent of the presence of O₂. Consequently, the electrochemical process counterbalances the O₂ interferences, especially at low phosphate concentrations. Importantly, the electrochemical uric acid oxidation specifically reports on phosphate concentration since it originates from the product of the bienzymatic reactions. These advantageous properties make this bioelectrochemical-electrochemical cascade particularly promising for point-of-use phosphate measurements.

Phosphines as Efficient Dioxygen Scavengers in Nitrous Oxide Sensors

A current challenge for development of amperometric sensors for the greenhouse gas nitrous oxide (N₂O) is their sensitivity toward dioxygen and trace water. The need for aqueous dioxygen scavengers in front of the sensor implies a background signal from penetrating water vapor. In this paper, we introduce substituted phosphines as dioxygen scavengers and demonstrate the application in a dioxygen-insensitive N₂O sensor. Suitably substituted phosphines have been synthesized to achieve good solubility properties in the electrochemically inert solvent propylene carbonate. Several sensors with and without physical separation of the sensing and dioxygen scavenging compartments were made and compared to current commercial sensors. The use of phosphines soluble in organic solvents as dioxygen scavengers yielded a higher sensitivity, albeit with longer response time. Proof-of-concept N₂O sensors without the physically separated dioxygen scavenger chamber showed a greatly enhanced sensitivity with a comparable response time, thus demonstrating the possibility for greatly simplified sensor construction.

Photosynthesis at the forefront of a sustainable life

The development of a sustainable bio-based economy has drawn much attention in recent years, and research to find smart solutions to the many inherent challenges has intensified. In nature, perhaps the best example of an authentic sustainable system is oxygenic photosynthesis. The biochemistry of this intricate process is empowered by solar radiation influx and performed by hierarchically organized complexes composed by photoreceptors, inorganic catalysts, and enzymes which define specific niches for optimizing light-to-energy conversion. The success of this process relies on its capability to exploit the almost inexhaustible reservoirs of sunlight, water, and carbon dioxide to transform photonic energy into chemical energy such as stored in adenosine triphosphate. Oxygenic photosynthesis is responsible for most of the oxygen, fossil fuels, and biomass on our planet. So, even after a few billion years of evolution, this process unceasingly supports life on earth, and probably soon also in outer-space, and inspires the development of enabling technologies for a sustainable global economy and ecosystem. The following review covers some of the major milestones reached in photosynthesis research, each reflecting lasting routes of innovation in agriculture, environmental protection, and clean energy production.