Microchip electrophoresis for wine analysis

Characterization of Saccharomyces Strains Isolated from “Kéknyelű” Grape Must and Their Potential for Wine Production

Novel wine yeast strains have the potential to satisfy customer demand for new sensorial experiences and to ensure that wine producers have strains that can produce wine as efficiently as possible. In this respect, hybrid yeast strains have recently been the subject of intense research, as they are able to combine the favourable characteristics of both parental strains. In this study, two Saccharomyces “Kéknyelű” grape juice isolates were identified by species-specific PCR and PCR-RFLP methods and investigated with respect to their wine fermentation potential. Physiological characterization of the isolated strains was performed and included assessment of ethanol, sulphur dioxide, temperature and glucose (osmotic stress) tolerance, killer-toxin production, glucose fermentation ability at 16 °C and 24 °C, and laboratory-scale fermentation using sterile “Kéknyelű” must. Volatile components of the final product were studied by gas chromatography (GC) and mass spectrometry (MS). One isolate was identified as a S. cerevisiae × S. kudriavzevii hybrid and the other was S. cerevisiae. Both strains were characterized by high ethanol, sulphur dioxide and glucose tolerance, and the S. cerevisiae strain exhibited the killer phenotype. The hybrid isolate showed good glucose fermentation ability and achieved the lowest residual sugar content in wine. The ester production of the hybrid strain was high compared to the control S. cerevisiae starter strain, and this contributed to the fruity aroma of the wine. Both strains have good oenological characteristics, but only the hybrid yeast has the potential for use in wine fermentation.

Robust and easy-to-use microchip electrophoresis within sub-millimeter channels for fast and highly efficient separation

Microchip capillary electrophoresis (MCE) is a powerful technique for rapid separation; however, its acceptance in routine laboratories is still limited. Compromises caused by the efforts for solving different problems, such as reducing its cost of fabrication and ensuring high separation efficiency, undermine the competitiveness of this technology compared to other separation techniques. Contrary to the conventional pursuit of narrow microchannels, this study investigated the suitability of microchips with channels at the sub-millimeter level, targeting the simplification of the overall operation, cost reduction, and robustness improvement. To this effect, we considered the influence of pressurized flow and Joule heating on the separation. The suppression of pressurized flow with viscous solutions was confirmed through a combination of simulations and experimental results, indicating that the buffer viscosity was enough for successful separation. We fabricated channels of 200 μm × 230 μm using computer numerical controlled (CNC) machining and obtained theoretical plate numbers of 4.8 × 10⁵ m^-1 and 5.3 × 10⁵ m^-1 for fluorescein isothiocyanate (FITC) labeled small molecules and DNA fragments, respectively, with a buffer viscosity of 168 mPa s (0.5 % hydroxypropyl methylcellulose, HPMC). These values are comparable with that of narrow-bore microchips. Furthermore, we did not observe any deleterious effects with low-conductivity buffers. We investigated the rapid and highly sensitive detection of mycoplasma contamination and the real samples of circulating cell-free DNA (cfDNA), which gave a limit of detection (LOD) as low as 2.3 ng mL^-1. Owing to the significant reduction in cost, ease of operation, and fast separation capabilities demonstrated in this work, MCE can be a viable alternative to the usual slab gel electrophoresis running in most biological laboratories.

Chip-based separation of organic and inorganic anions and multivariate analysis of wines according to grape varieties

This report describes the use of electrophoresis microchips integrated with contactless conductivity detection for the determination of organic acids and inorganic anions in wine samples and the subsequent classification based on the grape varieties. The best separation was achieved using a buffer composed of 30 mmol L^-1 2-(N-morpholino)ethanesulfonic acid, 15 mmol L^-1l-histidine and 0.05 mmol L^-1 cetyltrimethylammonium bromide (pH 5.8), allowing the determination of chloride, nitrate, sulfate, oxalate, tartrate, maleate, succinate, citrate, acetate, lactate, pyroglutamate and phosphate within ca. 100 s. The relative standard deviations obtained for the migration times were lower than 2%, while the obtained values for peak areas ranged from 2.5 to 8.4%. The limits of detection achieved for all compounds ranged between 3.0 and 12.6 μmol L^-1. A total of 18 wines from Brazil and Chile were successfully investigated, including red, white and rosé, and the anionic species were quantified with recovery values between 92 and 117%. A statistical difference has not been observed between the data obtained by using electrophoresis microchips integrated with contactless conductivity detection (ME-C⁴D) and capillary electrophoresis with ultra-violet detection (CE-UV) and thus the results from newly developed method is validated. Finally, similarities among the anionic profile of wines were investigated by using a multivariate approach, and it was possible to discriminate samples mainly by grapes varieties. Furthermore, the proposed methodology has provided instrumental simplicity and good analytical performance, demonstrating to be useful for routine quality control of wines.

Comparison of different types of sorbents for extraction of coumarins

Coumarins, derivatives of cinnamic acid, are found in wines aged in wooden barrels. The lab-made molecularly imprinted polymers (MIP), selective for simple coumarins, were used in three forms, as sorbents in solid phase extraction (SPE) cartridge or pipette tip and coated on to the surface of magnetite for magnetic extraction. MIP-7-hydroxycoumarin had greater selectivity and extraction efficiency (recoveries above 75%, RSDs less than 6%) compared with conventional SPE sorbents (C18 and styrene-divinylbenzene polymeric types). Batch extraction with MIP coated on to magnetic particles was relatively time-consuming compared with conventional and pipette tip SPE. The advantage of pipette tip SPE was reduced solvent volumes. LOQs for MISPE offline coupled with HPLC were less than 1.5 µg mL^-1 and 12 ng mL^-1 for UV and fluorescence detectors, respectively. 6-Methoxy-7-hydroxycoumarin and 4-methyl-7-hydroxycoumarin were detected in Slovak Tokaj wines using method with coumarin-specific sorbents.

Microfluidics as a Novel Tool for Biological and Toxicological Assays in Drug Discovery Processes: Focus on Microchip Electrophoresis

The last decades of biological, toxicological, and pharmacological research have deeply changed the way researchers select the most appropriate 'pre-clinical model'. The absence of relevant animal models for many human diseases, as well as the inaccurate prognosis coming from 'conventional' pre-clinical models, are among the major reasons of the failures observed in clinical trials. This evidence has pushed several research groups to move more often from a classic cellular or animal modeling approach to an alternative and broader vision that includes the involvement of microfluidic-based technologies. The use of microfluidic devices offers several benefits including fast analysis times, high sensitivity and reproducibility, the ability to quantitate multiple chemical species, and the simulation of cellular response mimicking the closest human in vivo milieu. Therefore, they represent a useful way to study drug-organ interactions and related safety and toxicity, and to model organ development and various pathologies 'in a dish'. The present review will address the applicability of microfluidic-based technologies in different systems (2D and 3D). We will focus our attention on applications of microchip electrophoresis (ME) to biological and toxicological studies as well as in drug discovery and development processes. These include high-throughput single-cell gene expression profiling, simultaneous determination of antioxidants and reactive oxygen and nitrogen species, DNA analysis, and sensitive determination of neurotransmitters in biological fluids. We will discuss new data obtained by ME coupled to laser-induced fluorescence (ME-LIF) and electrochemical detection (ME-EC) regarding the production and degradation of nitric oxide, a fundamental signaling molecule regulating virtually every critical cellular function. Finally, the integration of microfluidics with recent innovative technologies-such as organoids, organ-on-chip, and 3D printing-for the design of new in vitro experimental devices will be presented with a specific attention to drug development applications. This 'composite' review highlights the potential impact of 2D and 3D microfluidic systems as a fast, inexpensive, and highly sensitive tool for high-throughput drug screening and preclinical toxicological studies.

Recent Advances and Applications of Microfluidic Capillary Electrophoresis: A Comprehensive Review (2017-Mid 2019)

Microfluidic capillary electrophoresis (MCE) is the novel technique resulted from the CE mininaturization as planar separation and analysis device. This review presents and discusses various application fields of this advanced technology published in the period 2017 till mid-2019 in eight different sections including clinical, biological, single cell analysis, environmental, pharmaceuticals, food analysis, forensic and ion analysis. The need for miniaturization of CE and the consequence advantages achieved are also discussed including high-throughput, miniaturized detection, effective separation, portability and the need for micro- or even nano-volume of samples. Comprehensive tables for the MCE applications in the different studied fields are provided. Also, figure comparing the number of the published papers applying MCE in the eight discussed fields within the studied period is included. The future investigation should put into consideration the possibility of replacing conventional CE with the MCE after proper validation. Suitable validation parameters with their suitable accepted ranges should be tailored for analysis methods utilizing such unique technique (MCE).

Integration of High-Resolution Radiation Detector for Hybrid Microchip Electrophoresis

For decades, there has been immense progress in miniaturizing analytical methods based on electrophoresis to improve sensitivity and to reduce sample volumes, separation times, and/or equipment cost and space requirements, in applications ranging from analysis of biological samples to environmental analysis to forensics. In the field of radiochemistry, where radiation-shielded laboratory space is limited, there has been great interest in harnessing the compactness, high efficiency, and speed of microfluidics to synthesize short-lived radiolabeled compounds. We recently proposed that analysis of these compounds could also benefit from miniaturization and have been investigating capillary electrophoresis (CE) and hybrid microchip electrophoresis (hybrid-MCE) as alternatives to the typically used high-performance liquid chromatography (HPLC). We previously showed separation of the positron-emission tomography (PET) imaging tracer 3'-deoxy-3'-fluorothymidine (FLT) from its impurities in a hybrid-MCE device with UV detection, with similar separation performance to HPLC, but with improved speed and lower sample volumes. In this paper, we have developed an integrated radiation detector to enable measurement of the emitted radiation from radiolabeled compounds. Though conventional radiation detectors have been incorporated into CE systems in the past, these approaches cannot be readily integrated into a compact hybrid-MCE device. We instead employed a solid-state avalanche photodiode (APD)-based detector for real-time, high-sensitivity β particle detection. The integrated system can reliably separate [18F]FLT from its impurities and perform chemical identification via coinjection with nonradioactive reference standard. This system can quantitate samples with radioactivity concentrations as low as 114 MBq/mL (3.1 mCi/mL), which is sufficient for analysis of radiochemical purity of radiopharmaceuticals.

Coumarins content in wine: application of HPLC, fluorescence spectrometry, and chemometric approach

In this work, high performance liquid chromatography (HPLC) and fluorescence spectrometry methods for determination of natural coumarins in Tokaj wine were developed and compared. Molecularly imprinted solid phase extraction procedure was applied for sample preparation. The separation of esculin, coumarin, herniarin, 4-methylumbelliferone, scoparone, scopoletin was performed on core-shell C18 type of stationary phase (100 × 4.6 mm, 5 µm) with a gradient elution of mobile phase containing 1% aqueous solution of acetic acid and methanol, UV-VIS (280 nm for coumarin) and fluorescence detection (Ex 320 nm, Em 450 nm for other coumarins). The HPLC method was validated in term of linearity, limit of detection, limit of quantification, precision and accuracy. Fluorescence detection offers high sensitivity with limit of detection in the ng mL^-1 range. Scopoletine and 4-methylumbelliferone were identified and quantified in tested wines. Emission spectral data, synchronous fluorescence spectra of coumarins from fluorescence spectrometry and total concentrations of coumarins quantified by the HPLC method were used in the partial least squares regression. The linear regression between the concentrations predicted by the partial least squares model versus true values obtained by HPLC method confirmed good agreement between the two methods.

Microchip Electrophoresis Tools for the Analysis of Small Molecules

Microchip electrophoresis (ME) results from miniaturization of capillary electrophoresis (CE) to a microfabricated separation device. Both techniques have common characteristics, but in some aspects, the microfluidic separation device has unique features resulting from its planar miniaturized format. Here we describe the process to transfer of CE to ME and the benefits and drawbacks of the chip with respect to the capillary. A practical guide for method development on the microchip for small ionizable molecules such as phenolic compounds, amino acids, or alkaloids is also presented.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.

Recent advances in the application of capillary electromigration methods for food analysis and Foodomics

This review work presents and discusses the main applications of capillary electromigration methods in food analysis and Foodomics. Papers that were published during the period February 2015-February 2017 are included following the previous review by Acunha et al. (Electrophoresis 2016, 37, 111-141). The paper shows the large variety of food related molecules that have been analyzed by CE including amino acids, biogenic amines, carbohydrates, chiral compounds, contaminants, DNAs, food additives, heterocyclic amines, lipids, peptides, pesticides, phenols, pigments, polyphenols, proteins, residues, toxins, vitamins, small organic and inorganic compounds, as well as other minor compounds. This work describes the last results on food quality and safety, nutritional value, storage, bioactivity, as well as uses of CE for monitoring food interactions and food processing including recent microchips developments and new applications of CE in Foodomics.

Novel volumetric method for highly repeatable injection in microchip electrophoresis

A novel injector for microchip electrophoresis (MCE) has been designed and evaluated that achieves very high repeatability of injection volume suitable for quantitative analysis. It eliminates the injection biases in electrokinetic injection and the dependence on pressure and sample properties in hydrodynamic injection. The microfluidic injector, made of poly(dimethylsiloxane) (PDMS), operates similarly to an HPLC injection valve. It contains a channel segment (chamber) with a well-defined volume that serves as an "injection loop". Using on-chip microvalves, the chamber can be connected to the sample source during the "loading" step, and to the CE separation channel during the "injection" step. Once the valves are opened in the second state, electrophoretic potential is applied to separate the sample. For evaluation and demonstration purposes, the microinjector was connected to a 75 μm ID capillary and UV absorbance detector. For single compounds, a relative standard deviation (RSD) of peak area as low as 1.04% (n = 11) was obtained, and for compound mixtures, RSD as low as 0.40% (n = 4) was observed. Using the same microchip, the performance of this new injection technique was compared to hydrodynamic injection and found to have improved repeatability and less dependence on sample viscosity. Furthermore, a non-radioactive version of the positron-emission tomography (PET) imaging probe, FLT, was successfully separated from its known 3 structurally-similar byproducts with baseline resolution, demonstrating the potential for rapid, quantitative analysis of impurities to ensure the safety of batches of short-lived radiotracers. Both the separation efficiency and injection repeatability were found to be substantially higher when using the novel volumetric injection approach compared to electrokinetic injection (performed in the same chip). This novel microinjector provides a straightforward way to improve the performance of hydrodynamic injection and enables extremely repeatable sample volume injection in MCE. It could be used in any MCE application where volume repeatability is needed, including the quantitation of impurities in pharmaceutical or radiopharmaceutical samples.