Flake-like structure of SrTiO3 nanoparticles dispersed on graphene oxide: A selective and sensitive electrochemical sensor for determination of chloramphenicol in milk and honey samples

The use of Chloramphenicol (CAP), a potent antibiotic with broad-spectrum capabilities in food-producing animals has been restricted by the European Union and several other countries due to its severe side effects. Thus, CAP must be detected quickly and sensitively. In this investigation, the preparation of SrTiO3 nanoparticles was carried out utilizing a hydrothermal technique. The as-synthesized strontium titanate was decorated on the graphene oxide (SrTiO3/GO) using an ultrasonication method. An electrochemical sensor was developed by employing a modified electrode consisting of SrTiO3/GO, which can accurately detect CAP in food samples. The synergistic effect of SrTiO3 and GO could improve the peak current response. Remarkably, the SrTiO3/GO-modified glassy carbon electrode has a LOD and sensitivity of 6.08 µM nM and 2.771 µA·μM-1·cm-2, respectively. This modified electrode was evaluated in food samples and had an outstanding reaction with a high percentage of recovery, which makes it a potential electrocatalyst for CAP detection.

A reusable screen-printed carbon electrode-based aptasensor for the determination of chloramphenicol in food and environment samples

An electrochemical aptasensor was developed for the determination of chloramphenicol (CAP) in fresh foods and food products. The aptasensor was developed using Prussian blue (PB) and chitosan (CS) film. PB acts as a redox probe for detection and CS acts as a sorption material. The aptamer (Apt) was immobilized on a screen-printed carbon electrode (SPCE) modified with gold nanoparticles (AuNPs). Under optimum conditions, the linearity of the aptasensor was between 1.0 and 6.0 × 106 ng L-1 with a detection limit of 0.65 and a quantification limit of 2.15 ng L-1. The electrode could be regenerated up to 24 times without the use of chemicals. The aptasensor showed good repeatability (RSD <11.2%) and good reproducibility (RSD <7.7%). The proposed method successfully quantified CAP in milk, shrimp pond water and shrimp meat with good accuracy (recovery = 88.0 ± 0.6% to 100 ± 2%). The proposed aptasensor could be especially useful in agriculture to ensure the quality of food and the environment and could be used to determine other antibiotics.

Multilayered Fe3O4@(ZIF-8)3 combined with a computer-vision-enhanced immunosensor for chloramphenicol enrichment and detection

The misuse and overuse of chloramphenicol poses severe threats to food safety and human health. In this work, we developed a magnetic solid-phase extraction (MSPE) pretreatment material coated with a multilayered metal-organic framework (MOF), Fe3O4 @ (ZIF-8)3, for the separation and enrichment of chloramphenicol from fish. Furthermore, we designed an artificial-intelligence-enhanced single microsphere immunosensor. The inherent ultra-high porosity of the MOF and the multilayer assembly strategy allowed for efficient chloramphenicol enrichment (4.51 mg/g within 20 min). Notably, Fe3O4 @ (ZIF-8)3 exhibits a 39.20% increase in adsorption capacity compared to Fe3O4 @ZIF-8. Leveraging the remarkable decoding abilities of artificial intelligence, we achieved the highly sensitive detection of chloramphenicol using a straightforward procedure without the need for specialized equipment, obtaining a notably low detection limit of 46.42 pM. Furthermore, the assay was successfully employed to detect chloramphenicol in fish samples with high accuracy. The developed immunosensor offers a robust point-of-care testing tool for safeguarding food safety and public health.

Simultaneous Determination of Amphenicols in Animal-Derived Foods by Solvent and Solid Phase Extraction With Ultrahigh-Performance Liquid Chromatography Tandem Mass Spectrometry

BACKGROUND

The consumption of foods containing amphenicols, a type of antibiotic, is a major concern for human health. A stable and accurate detection method can provide technical support for food-safety monitoring.

OBJECTIVE

An effective and efficient method was established for determining amphenicols in animal-derived foods through the simultaneous use of solid-phase extraction (SPE) cleanup and ultrahigh-performance liquid chromatography/mass spectrometry (UPLC-MS/MS).

METHOD

Samples were extracted using 1.0% ammoniated ethyl acetate solution, degreased with n-hexane, and then concentrated and cleaned using a C18 SPE column. Next, gradient elution was performed using methanol and 0.05% aqueous ammonia as the mobile phase, followed by separation using a C18 column. The target compound was detected using electrospray ionization, both in positive and negative modes, through multiple reaction monitoring, and quantified using an internal-standard method.

RESULTS

The content of chloramphenicol (CAP), florfenicol (FF), and florfenicol amine (FFA) (content range: 0.2-8.0 µg/kg) as well as that of thiamphenicol (TAP; content range: 1.0-40.0 µg/kg) show a good linear relationship, with a correlation coefficient of r > 0.999. Furthermore, recoveries of 86.7-111.9% and relative standard deviations of <9.0% were achieved. The limits of detection and quantification are obtained as 0.03-0.33 and 0.1-1.0 μg/kg, respectively.

CONCLUSIONS

The proposed method has excellent stability and accuracy, and can be successfully used for the qualitative and quantitative determination of amphenicols, i.e., CAP, TAP, FF, and FFA residues in 210 animal-derived food samples, of which FF and FFA were detected in four samples.

HIGHLIGHTS

A stable and accurate method was successfully established for the simultaneous determination of CAP, TAP, FF, and FFA in animal-derived foods using UPLC-MS/MS. Effective sample pretreatment was established, lipids were removed using n-hexane, concentration and cleanup were achieved with the C18 SPE column, and matrix effects were effectively reduced, thus improving the method's accuracy and stability. The method was validated for eight common animal-source foods, including beef, lamb, pork, chicken, egg, milk, fish, and honey. This method has good applicability for CAP, TAP, FF, and FFA in animal-derived foods.

Detection of antibiotic residues in groundwater with a validated multiresidue UHPLC-MS/MS quantification method

The occurrence of antibiotic residues in the environment has received considerable attention because of their potential to select for bacterial resistance. The overuse of antibiotics in human medicine and animal production results in antibiotic residues entering the aquatic environment, but concentrations are currently not well determined. This study investigates the occurrence of antibiotics in groundwater in areas strongly related to agriculture and the antibiotic treatment of animals. A multiresidue method was validated according to EU Regulation 2021/808, to allow (semi-)quantitative analysis of 78 antibiotics from 10 different classes: β-lactams, sulfonamides, tetracyclines, lincosamides, amphenicols, (fluoro)quinolones, macrolides, pleuromutilins, ansamycins and diaminopyrimidines using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). This method was used to test different storage conditions of these water samples during a stability study over a period of 2 weeks. Sulfonamides, lincosamides and pleuromutilins were the most stable. Degradation was most pronounced for β-lactam antibiotics, macrolides and ansamycins. To maintain stability, storage of samples at -18 °C is preferred. With the validated method, antibiotic residues were detected in groundwater, sampled from regions associated with intensive livestock farming in Flanders (Belgium). Out of 50 samples, 14% contained at least one residue. Concentrations were low, ranging from < LOD to 0.03 μg/L. Chloramphenicol, oxolinic acid, tetracycline and sulfonamides (sulfadiazine, sulfadoxine, sulfamethazine and sulfisoxazole) were detected. This study presents a new method for the quantification of antibiotic residues, which was applied to investigate the presence of antibiotic residues in groundwater in Flanders.

A facile fabric phase sorptive extraction method for monitoring chloramphenicol residues in milk samples

Determination of pharmaceutical active molecules in the biological matrices is crucial in various fields of clinical and pharmaceutical chemistry, e.g., in pharmacokinetic studies, developing new drugs, or therapeutic drug monitoring. Chloramphenicol (CP) is used for treating bacterial infections, and it's one of the first antibiotics synthetically manufactured on a large scale. Fabric phase sorptive extraction (FPSE) was used to determine Chloramphenicol antibiotic residues in milk samples by means of validated HPLC-DAD instrumentation. Cellulose fabric phases modified with polyethylene glycol-block-polypropylene glycol-block-polyethylene glycol triblock copolymer was synthesized using sol-gel synthesis approach (Sol-gel PEG-PPG-PEG) and used for batch-type fabric phase extractions. Experimental variables of the FPSE method for antibiotic molecules were investigated and optimized systematically. The HPLC analysis of chloramphenicol was performed using a C18 column, isocratic elution of trifluoroacetic acid (0.1%), methanol, and acetonitrile (17:53:30) with a flow rate of 1.0 mL/min. The linear range for the proposed method for chloramphenicol (r2 > 0.9982) was obtained in the range of 25.0-1000.0 ng/mL. The limit of detections (LOD) is 8.3 ng/mL, while RSDs% are below 4.1%. Finally, the developed method based on FPSE-HPLC-DAD was applied to milk samples to quantitatively determine antibiotic residues.

Evaluation of the antibacterial activity and protein profiling of Nile tilapia (Oreochromis niloticus) epidermal mucus under different feeds and culture systems (biofloc technology and earthen pond)

The mucus layers of fish serve as the main interface between the organism and the environment. They play an important biological and ecological role. The current study focuses on Nile tilapia epidermal mucus reared under different commercial feeds (coded A and B) and environments (biofloc technology and earthen pond systems). Crude protein levels in feed A and B were 30% and 28%, respectively. Water parameters in all culturing systems were suitable for tilapia throughout the study period. The antimicrobial potency of tilapia (n = 5 from each) epidermal mucus was tested in vitro against human and fish pathogenic strains viz. Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Francisella noatunensis, and Aeromonas hydrophila. To determine the antimicrobial activity, zones of inhibition (ZOI) were measured in millimetres and compared with two antibiotics (chloramphenicol and ciprofloxacin). SDS-PAGE analysis was performed on skin mucus samples of tilapia to determine protein quantity and size (molecular weight). Results of tilapia skin mucus (crude and aqueous) revealed a strong antibacterial effect against all the selected pathogenic strains. However, variation has been observed in the mucus potency and ZOI values between the biofloc and pond tilapia mucus. The crude mucus of tilapia fed on feed A and cultured in the pond exhibited strong antibacterial effects and high ZOI values compared to the mucus of biofloc tilapia, aqueous mucus extracts and positive control chloramphenicol (antibiotic). The SDS-PAGE results showed that the high molecular weight proteins were found in the collected epidermal mucus of BFT-B (240 kDa) and EP-B (230 kDa). Several peptides in fish skin mucus may play a crucial role in the protection of fish against disease-causing pathogens. Thus, it can be utilized in the human and veterinary sectors as an 'antimicrobial' for treating various bacterial infections.

Rapid multi-residue LC-MS/MS determination of nitrofuran metabolites, nitroimidazoles, amphenicols, and quinolones in honey with ultrasonic-assisted derivatization - magnetic solid-phase extraction

A rapid multi-residue LC-MS/MS method for the identification and determination of banned veterinary drugs in honey was developed. A total of 31 investigated veterinary drugs belonging to 4 classes including nitrofurans metabolites, nitroimidazoles, amphenicols, and quinolones were quantified by LC-MS/MS with ESI using one single injection. The sample preparation included treatment with 5-nitro-2-furaldehyde (5-NFA) in a thermostated ultrasonic bath (80 °C, 0.5М НСl, 20 min) to liberate matrix-bound residues of nitrofurans. Magnetic hypercrosslinked polystyrene (HCP/Fe3O4) was proposed for the solid-phase extraction and clean-up of target analytes prior to LC-MS/MS analysis. To evaluate and validate the performance of method, the criteria of the Decision (EC) no 2002/657 were applied. The LOQs of the examined analytes range from 0.3 to 1 μg kg-1, which indicates good sensitivity to quantify the target compounds in honey. The recoveries of veterinary drugs from 1 g of honey with 50 mg of the sorbent are 97-109% for nitrofuran metabolites, 84-115% for nitroimidazoles, 86-103% for amphenicols, and 97-118% for quinolones. The relative standard deviations of intra-day and inter-day precision analyses (RSD) are less than 16%. This methodology was applied to real honey samples and trace levels of some veterinary drugs were detected.

Analysis and risk assessment of pharmaceutical residues in fish from three water bodies in Ghana

Illegal mining has overshadowed pharmaceutical pollution even though exposure to pharmaceutical waste is high. Consumption of fish potentially polluted with pharmaceuticals from the rivers continues with little concern or potential threat it poses. In the present study, the residues of one antibiotic (Chloramphenicol), five hormones (progesterone, 17-beta Estradiol, Estrone, 17a-Ethynylestradiol, and one), three environmental contaminants (4-para-nonylphenol, 4-tert-octylphenol, and Bisphenol A), one barbiturate (Primidone) and one analgesic (Diclofenac sodium salt), were investigated from fish samples from the rivers Pra, Narkwa, and the Volta. The results show a high concentration of drugs in River Pra in comparison to those in Rivers Narkwa and Volta. The hazard quotients (HQs) for the environmental contaminants were all above 1, except Bisphenol A. Furthermore, the HQs from this study suggest that consumers of fish from any of the three rivers stand a hazard risk of Chloramphenicol (19), 17a-Ethynylestradiol (4), Estrone (1.366), Diclofenac sodium salt (3.29), Progesterone (4.598), 4-tert-octylphenol (87.2), and 4-para-nonylphenol (7.252), but negligible risk against E2 (0.687), Primidone (0.014), Testosterone (0.16), and Bisphenol A (0.642). Of the fish species studied, the highest concentration of all pharmaceuticals put together is found in Clarias gariepinus, Labeo senegalensis, and Chrysichthys nigrodigitatus in that order.

Determination of the fate of antibiotic resistance genes and the response mechanism of plants during enhanced antibiotic degradation in a bioelectrochemical-constructed wetland system

Chloramphenicol (CAP) has a high concentration and detection frequency in aquatic environments due to its insufficient degradation in traditional biological wastewater treatment processes. In this study, bioelectrochemical assistant-constructed wetland systems (BES-CWs) were developed as advanced processes for efficient CAP removal, in which the degradation and transfer of CAP and the fate of antibiotic resistance genes (ARGs) were evaluated. The CAP removal efficiency could reach as high as 90.2%, while the removed CAP can be partially adsorbed and bioaccumulated in plants, significantly affecting plant growth. The vertical gene transfer and horizontal gene transfer increased the abundance of ARGs under high voltage and CAP concentrations. Microbial community analysis showed that CAP pressure and electrical stimulation selected the functional bacteria to increase CAP removal and antibiotic resistance. CAP degradation species carrying ARGs could increase their opposition to the biotoxicity of CAP and maintain system performance. In addition, ARGs are transferred into the plant and upward, which can potentially enter the food chain. This study provides an essential reference for enhancing antibiotic degradation and offers fundamental support for the underlying mechanism and ARG proliferation during antibiotic biodegradation.

RNA-cleaving deoxyribozyme-linked immunosorbent assay for the ultrasensitive detection of chloramphenicol in milk

In this presented work, an artificial deoxyribozyme was employed as the substitute for horseradish peroxidase (or alkaline phosphatase) in ELISA for generating amplified signals. The feasibility of the proposed deoxyribozyme-based ELISA (DLISA) was demonstrated in the detection of a forbidden veterinary drug, chloramphenicol. And its efficiency was praised since that ultrahigh sensitivity was accomplished with a detection limit of 0.1 ng/L. The wide linear range from 0.000001 μg/mL to 1.0 μg/mL, as well as good recoveries from 86 % to 104 % in whole milk samples showed its excellent practical performances. Besides, the DLISA was worth popularizing due to the easy connection of antibody and DNAzyme through a facile functionalization process of gold nanoparticles. These advantages showed the possibility of DLISA for developing commercial kits, and the utilization of flexible DNA fluorescent probes in DLISA would inspire more work on innovations.

An Effective Electrochemical Platform for Chloramphenicol Detection Based on Carbon-Doped Boron Nitride Nanosheets

Currently, accurate quantification of antibiotics is a prerequisite for health care and environmental governance. The present work demonstrated a novel and effective electrochemical strategy for chloramphenicol (CAP) detection using carbon-doped hexagonal boron nitride (C-BN) as the sensing medium. The C-BN nanosheets were synthesized by a molten-salt method and fully characterized using various techniques. The electrochemical performances of C-BN nanosheets were studied using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the electrocatalytic activity of h-BN was significantly enhanced by carbon doping. Carbon doping can provide abundant active sites and improve electrical conductivity. Therefore, a C-BN-modified glassy carbon electrode (C-BN/GCE) was employed to determine CAP by differential pulse voltammetry (DPV). The sensor showed convincing analytical performance, such as a wide concentration range (0.1 µM-200 µM, 200 µM-700 µM) and low limit of detection (LOD, 0.035 µM). In addition, the proposed method had high selectivity and desired stability, and can be applied for CAP detection in actual samples. It is believed that defect-engineered h-BN nanomaterials possess a wide range of applications in electrochemical sensors.

A graphene-oxide-based aptasensor for fluorometric determination of chloramphenicol in milk and honey samples utilizing exonuclease III-assisted target recycling and Nb.BbvCI-powered DNA walker cascade amplification

Herein, a graphene oxide (GO)-based fluorescence aptasensor was developed for the sensitive and selective detection of chloramphenicol (CAP), based on exonuclease III (Exo III)-assisted target recycling and Nb.BbvCI-driven DNA walker cascade amplification. Interactions between CAP, hairpin1(HP1), hairpin2 (HP2), and 3'-amino modified hairpin3 (HP3) labeled with carboxyfluorescein (FAM) and covalently coupled to GO enabled efficient CAP detection. CAP was quantitatively assayed by measuring fluorescence at excitation/emission wavelengths of 480/514 nm, resulting from the accumulation of released FAM. A good linear range of 1 fM to 1 nM and a limit of detection (LOD) of 0.875 fM (signal-to-noise (S/N)= 3) were achieved. This aptasensor can distinguish the CAP from interference antibiotics with good specificity and selectivity, even if the concentration of the interfering substance is ten-fold higher than the target concentration. Moreover, the developed fluorescence aptasensor was successfully applied for the detection of CAP in spiked milk and honey samples. Thus, this method is potentially applicable for assaying CAP in foods and provides a promising strategy for the development of fluorescence aptasensors for environmental sample analysis.

Frequent contamination of edible freshwater fish with colistin-resistant Escherichia coli harbouring the plasmid-mediated mcr-1 gene

The threat of antimicrobial resistance is increasing. Microbial food contamination poses a serious public health risk; however, there are only a few studies on the prevalence of colistin-resistant Escherichia coli (COL-E) contamination in freshwater fish. This study aimed to characterise the antibiotic resistance genes and antibiotic susceptibility profiles of COL-E in freshwater fish in Vietnam. In total, 103 fish were collected and 63 COL-E were isolated. COL-E was investigated by genotyping mcr and AmpC/extended-spectrum β-lactamase (ESBL)-related genes. The results show that COL-E and AmpC/ESBL-producing COL-E were confirmed in 24.3 % and 14.6 % of the fish, respectively. Multiplex PCR for mcr-1-9 showed that all 63 COL-E harboured mcr-1, while mcr-3 was detected in 7.9 % of COL-E. The minimum inhibitory concentration of colistin ranged from 2 to 256 μg/mL. Meanwhile, antibiotic susceptibility results show that all COL-E were resistant to ampicillin, streptomycin, and chloramphenicol.

Sources, Environmental Fate, and Ecological Risks of Antibiotics in Sediments of Asia's Longest River: A Whole-Basin Investigation

This study conducted the first extensive and comprehensive investigation of the whole-scale sedimentary antibiotic concentration, possible drivers, environmental fate, and potential ecological risks in the Yangtze River. Totally, 20 antibiotics were detected in the sediments. Results revealed that the order of antibiotic abundance in sediment was fluoroquinolones > tetracyclines > macrolides > sulfonamides > amphenicols. The total antibiotic concentrations were 0.10-134.4 ng/g (mean: 11.88 ng/g). Of these, fluoroquinolones and tetracyclines were the two dominant antibiotic categories. The dominant occurrence of fluoroquinolones and tetracyclines in sediments suggested that the distribution coefficient (K_d) was one of the important factors to determine their fate. Correlation analysis demonstrated that antibiotic contamination was largely influenced by the local scale of animal husbandry, and the positive correlation between antibiotics and heavy metals was likely driven by their common source of contamination and the complexation. Environmental risk assessment showed that tetracycline and chlortetracycline exhibited potential risks from medium to high in the Yangtze River, although most of the compounds posed minimal and low risks. This work provided a valuable large-scale data set across the whole Yangtze River and revealed the contamination profile of antibiotics. Mitigation and management measures to reduce antibiotic inputs are needed for the Yangtze River basin.

Simultaneous Determination of Antibiotics, Mycotoxins, and Hormones in Milk by an 8-17 DNAzyme-Based Enzyme-Linked Immunosorbent Assay

The simultaneous detection of three kinds of small-molecule contaminants (antibiotics, mycotoxins, and hormones) in milk was realized by using an 8-17 DNAzyme-based fluorescent enzyme-linked immunosorbent assay (ELISA), in which 8-17 DNAzyme was utilized as the catalytic enzyme for amplifying the signal. Compared with the conventional ELISA in which horseradish peroxidase is used as the catalyzing factor, this 8-17 DNAzyme-based ELISA could achieve multicolor signal output with lower detection limits. The linearities for chloramphenicol, 17β-estradiol, and aflatoxin M₁ were in the range of 0.3 ng/mL-3 μg/mL, 3 ng/mL-3 μg/mL, and 3 pg/mL-3 ng/mL with quantitation limits of 0.3, 3, and 0.003 ng/mL, respectively. This proposed scheme demonstrated that the 8-17 DNAzyme might be an effective substitute for horseradish peroxidase in ELISA for the development of ultrasensitive and multicolor fluorescence immunoassay, which would stimulate the development of ELISA in a new orientation.

Radiotracer studies to isolate in-house receptors from poultry liver for multi-chemical hazard analysis in selected food and feed

In-house receptors (IHRs) were isolated from non-immunized poultry liver to analyze selected contaminants and residues in targeted food and feed using ¹⁴C- and ³H-labeled radiotracers. Matrix (2 g) was homogenized and centrifuged with the resultant pellet used as IHRs. These were characterized for total protein contents (6.1 mg mL^-1) and compared with commercial receptors for aflatoxins (0.28 mg tablet^-1) and chloramphenicol (0.12 mg tablet^-1). Gel electrophoresis of the IHRs showed a mixture of polypeptides-an important attribute for multi-residues analysis-compared with commercial receptors that presented specific protein bands at 65 kDa (chloramphenicol) and 70 kDa (aflatoxins). The inhibition index of IHRs for aflatoxins B1 and B2 in wheat and bovine feed and chloramphenicol in bovine tissue at, above, and below maximum limits or minimum required performance limits, revealed an inverse relationship between radiotracer and analyte concentrations. Saturation with increased radioligand concentration up to 5.5 kBq indicated higher holding potential. However, increasing incubation time to 30 min did not significantly increase analyte-binding. The IHRs performance was comparable to commercial receptors with control point averages of 348, 410, 555, and 307 counts per minute determined for gentamicin, chloramphenicol, oxytetracycline, and aflatoxin M1, respectively in local milk samples.

Urinary concentrations of amphenicol antibiotics in relation to biomarkers of oxidative DNA and RNA damage in school children

Previous studies implied that elevated exposure to amphenicol antibiotics may induce increased oxidative stress. However, the effects of amphenicol antibiotics exposure on oxidative stress damage in human have not been well studied. This study examined the associations between amphenicol antibiotics exposure and oxidative damage biomarkers in school children. Three major amphenicols including chloramphenicol (CAP), thiamphenicol (TAP), florfenicol (FF) and two biomarkers of 8-hydroxydeoxyguanosine (8-OHdG) for oxidative DNA damage and 8-oxo-7,8- dihydroguanosine (8-OHG) for oxidative RNA damage were measured in 414 morning urine samples collected from 70 school children in Shanghai, China. School children were exposed to CAP, TAP, and FF with median concentrations of 1.37, 0.36, and 0.06 μg/g Cre, respectively. Linear mixed models revealed that an interquartile range (IQR) increase of urinary TAP was positively associated with 7.75%(95% CI: 4.40%, 11.1%) increase of 8-OHdG and 7.48%(95% CI: 2.49%, 15.6%) increase of 8-OHG, respectively; in addition, CAP was associated with elevated 8-OHdG. Although FF was not found to be significantly associated with either 8-OHdG or 8-OHG, it is warranted to further investigate FF and its metabolites levels in relation to oxidative stress in future study. Our findings provide new evidence for the effects of exposure to TAP and CAP on nucleic acid oxidative damage in Children.

Degradation of chloramphenicol by Ti/PbO2-La anodes and alteration in bacterial community and antibiotics resistance genes

Antibiotics accumulation in the environment has given rise to multi-drug resistant 'superbugs' and antibiotics resistence genes (ARGs). Chloramphenicol (CAP), a kind of widely used antibiotics, was chosen as the model compound to investigate its degradation during electrochemical treatment process. The prepared Ti/PbO₂-La electrodes had a denser surface and a more complete PbO₂ crystal structure than Ti/PbO₂ electrode. The doping of La increased the onset potential and the overpotential, increased the current value of the oxidation peak and the reduction peak, reduced the impedance, and increased the lifetime. The reactions CAP degradation and TOC removal on Ti/PbO₂-La electrode was both primary kinetic reactions. CAP degradation rate increased with current density, and TOC obtained the highest removal at current density of 25 mA cm^-2. The electrolyte concentration had a small effect in the range of 0.050-0.150 mol L^-1. The effects under acidic and neutral conditions were better than under alkaline conditions. CAP was mainly directly oxidized at the electrode surface and indirect oxidation also took place via generated ·OH and SO₄^·-. 15 intermediates and 2 degradation pathways have been postulated. The entry of CAP and CAP intermediates into the environment caused the alteration in bacterial community and ARGs, while complete degradation products had little effect on them. Redundancy analysis showed that intI1 was the dominant factor affecting ARGs, and Actinobacteria and Patescibacteria were the main factors affecting the abundances of ARGs in the microbial community.

Dual-readout fluorescence quenching immunochromatographic test strips for highly sensitive simultaneous detection of chloramphenicol and amantadine based on gold nanoparticle-triggered photoluminescent nanoswitch control

Herein, a novel fluorescence quenching immunochromatographic test strip (FQICTS) for simultaneous detection of chloramphenicol (CAP) and amantadine (AMD) was developed on the basis of inner filter effect (IFE), with the combination of gold nanoparticles (AuNPs) and highly luminescent green-emitting gold nanoclusters (AuNCs) as the IFE quencher/donor pair. The AuNPs could quench the excitation light and emission light of AuNCs and achieve a high IFE efficiency due to dual spectral overlapping. Under optimal conditions, the "turn-on" mode of the AuNCs-based dual-readout FQICTS showed good linearity for CAP detection in chicken samples from 0.05 ng/g to 10 ng/g, with a limit of detection (LOD) of 0.043 ng/g. The linear range of AMD is 0.5-50 ng/g, with LOD of 0.45 ng/g. The visual LODs of CAP and AMD in "turn-on" mode were 200 and 10 times lower than that in "turn-off" mode, respectively. The "turn-on" mode of FQICTS showed high recovery for detecting CAP (82.5-94.5%) and AMD (81.9-110.7%) spiked into chicken samples. The performance and practicability of the established method were verified with commercial enzyme-immunoassay kits, and good correlations were observed. Overall, the newly developed AuNCs-based dual-readout FQICTS is a promising on-site screening tool for rapid, high-sensitivity detection of multiple food contaminants in practical applications.

Rapid quantitative detection of chloramphenicol in three food products by lanthanide-labeled fluorescent-nanoparticle immunochromatographic strips

A rapid and sensitive fluorescence-based immunochromatographic test (ICT) was successfully developed to determine chloramphenicol (CAP) levels in three food products. In this method, lanthanide fluorescent microspheres were used as a label to detect CAP in food samples within 30 min quantitatively, and the result was displayed on the test strip reader. After optimizing detection conditions, the detection limit (LOD) for the three food products was 0.048-0.073 ng g^-1, and the half-maximal inhibitory concentration (IC₅₀) was 0.27 ng mL^-1. Six other veterinary drugs were detected using the test strip, and no cross-reactivity was observed, indicating that the specificity of the method was satisfactory. This method was also successfully applied to determine CAP in honey, egg, and fish samples, with recoveries ranging from 78.73% to 121.12%. The results demonstrated that this test strip had high sensitivity and specificity, and could be used for field detection within 30 min.

Single and ternary competitive adsorption-desorption and degradation of amphenicol antibiotics in three agricultural soils

The widespread usage of veterinary antibiotics results in antibiotic contamination and increases environmental risks. This study was evaluated the single and ternary competitive adsorption-desorption and degradation of three amphenicol antibiotics (AMs): chloramphenicol (CAP), thiamphenicol (TAP), and florfenicol (FF) in three agricultural soils. The adsorption capacity of amphenicol antibiotics in the soil was weak, and the K_f value was in the range of 0.15-3.59 μg^1-1/nL^1/n kg^-1. In the single adsorption-desorption experiment, the ranked order of adsorption capacity was TAP > FF > CAP. However, in the ternary competitive adsorption experiment, the order was changed to be CAP > FF > TAP. The degradation of AMs in soils was performed at various conditions. All AMs were vulnerable to microbial degradation in soils. A higher initial concentration would reduce the degradation rate and enhance the persistence of AMs in soil. The degradation of AMs was positively influenced by changes in soil moisture content and culture temperatures up to 30 °C and decreased at higher temperatures. An equation was used to predict the leachability of AMs in soils and assess their risk to the water environment. The weak adsorption capacity and poor persistence of FF indicated that it may have a strong effect on groundwater based on the equation. It is imperative to further assess the biological impacts of FF at environmentally relevant concentrations given its mobility and extensive use in the livestock industry.

Stimuli-Responsive Metal-Organic Framework on a Metal-Organic Framework Heterostructure for Efficient Antibiotic Detection and Anticounterfeiting

Stimuli-responsiveness is an important characteristic that show promising potential in various applications. Herein, a novel ZIF-8-on-Tb-dpn (H₃dpn = 5-(2',4'-dicarboxylphenyl)nicotic acid) heterostructure is constructed using a heteroepitaxial strategy combining the chemical-responsive (antibiotics) and light-responsive behaviors. The pyridine nitrogen of Tb-dpn acts as an anchor site for Zn²⁺, which helps to overcome the limit of lattice mismatch between two metal-organic frameworks (MOFs) and promotes the growth of ZIF-8 nanocrystals. Based on the synergy effect of two MOFs, ZIF-8-on-Tb-dpn exhibits an efficient turn-off response toward tetracycline and chloramphenicol via competitive absorption, Förster resonance energy transfer, and photoinduced electron transfer processes with limit of detection values of 5.6 and 37.6 nM, respectively, which are three- to -fivefold lower than those of Tb-dpn. Moreover, the nanocage of ZIF-8 is utilized to encapsulate photochromic spiropyran (SP) molecules and realize the reversible conversion between SP and merocyanine (MC) under visible light and ultraviolet light. The MC form is accompanied with strong adsorption at 555 nm, which can erase the emission of Tb³⁺. Therefore, a reversible invisible anticounterfeiting pattern is designed with SP ⊂ ZIF-8-on-Tb-dpn for information anticounterfeiting. The excellent stimuli-responsive ability makes the luminescent platform a potential candidate in luminescence applications.

MOF-derived hollow NiCo2O4/C composite for simultaneous electrochemical determination of furazolidone and chloramphenicol in milk and honey

Herein, bimetallic Co/Ni-MOF derived hollow NiCo₂O₄@C composite modified glassy carbon electrode (NiCo₂O₄@C/GCE) is constructed and applied to simultaneously detect furazolidone (FZD) and chloramphenicol (CAP) for the first time. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, nitrogen adsorption-desorption and X-ray photoelectron spectroscopy confirm that NiCo₂O₄@C has hollow and mesoporous structure, abundant carbon matrixes, sufficient oxygen defects and mixed-valence metallic elements. These advantages make NiCo₂O₄@C/GCE show distinguished electrocatalytic performance toward the simultaneous determination of FZD and CAP. The NiCo₂O₄@C/GCE shows wide linear ranges of 0.5-240 µM for FZD and 0.5-320 µM for CAP, low limit of detection of 8.47 nM for FZD and 35 nM for CAP. The mechanism studies show that reductions of FZD and CAP on NiCo₂O₄@C/GCE are both four-electron and four-proton processes. Moreover, the sensor obtains desirable recoveries for the simultaneous determination of FZD (95.85%-103.9%) and CAP (95.72%-104.4%) in milk and honey by standard addition method.

Exonuclease III-Driven Dual-Amplified Electrochemical Aptasensor Based on PDDA-Gr/PtPd@Ni-Co Hollow Nanoboxes for Chloramphenicol Detection

Herein, a hierarchically porous Zr-MOF-labeled electrochemical aptasensor based on the composite of PtPd@Ni-Co hollow nanoboxes (PtPd@Ni-Co HNBs) and poly (diallyldimethylammonium chloride)-functionalized graphene (PDDA-Gr) was developed for ultrasensitive detection of chloramphenicol (CAP). PtPd@Ni-Co HNBs have excellent conductivity and provide binding sites for aptamers; the functionalized PDDA-Gr improves its dispersibility and conductivity as a substrate material, which can be successfully used to increase the electrode surface area and support more PtPd@Ni-CoHNBs. Besides, hierarchically porous Zr-MOFs (HP-UiO-66) were utilized as signal probes and showed a stronger load capacity for signal molecules than conventional UiO-66. In the presence of CAP, two ingeniously designed Exo III-assisted cyclic amplification strategies further improved the sensitivity of the aptasensor: CAP causes cycle I to release a large amount of trigger DNA (Tr DNA), and then, Tr DNA initiated cycle II, which causes the exposed capture DNA to further bind the signal probes. With these advantages, the constructed aptasensors performed with satisfactory sensitivity in a wide linear range (10 fM-10 nM) and a detection limit of 0.985 fM. Several signal amplification strategies adopted in this study have effectively improved the performance of the sensor, providing a new avenue for the development of ultrasensitive sensors in the food analysis field.

Intertwined Carbon Nanotubes and Ag Nanowires Constructed by Simple Solution Blending as Sensitive and Stable Chloramphenicol Sensors

Chloramphenicol (CAP) is a harmful compound associated with human hematopathy and neuritis, which was widely used as a broad-spectrum antibacterial agent in agriculture and aquaculture. Therefore, it is significant to detect CAP in aquatic environments. In this work, carbon nanotubes/silver nanowires (CNTs/AgNWs) composite electrodes were fabricated as the CAP sensor. Distinguished from in situ growing or chemical bonding noble metal nanomaterials on carbon, this CNTs/AgNWs composite was formed by simple solution blending. It was demonstrated that CNTs and AgNWs both contributed to the redox reaction of CAP in dynamics, and AgNWs was beneficial in thermodynamics as well. The proposed electrochemical sensor displayed a low detection limit of up to 0.08 μM and broad linear range of 0.1-100 μM for CAP. In addition, the CNTs/AgNWs electrodes exhibited good performance characteristics of repeatability and reproducibility, and proved suitable for CAP analysis in real water samples.

An electrochemical aptasensor based on PEI-C3N4/AuNWs for determination of chloramphenicol via exonuclease-assisted signal amplification

An electrochemical aptasensor, including the polyethyleneimine-graphite-like carbon nitride/Au nanowire nanocomposite (PEI-C₃N₄/AuNWs) and exonuclease-assisted signal amplification strategy was constructed for the determination of chloramphenicol (CAP). Initially, a nanocomposite with substantial electrocatalytic property was synthesized by PEI-C₃N₄/AuNWs. This improves the conductivity and specific surface area of the PEI-C₃N₄/AuNW-modified gold electrode. Next, a DNA with a complementary sequence to a CAP aptamer (cDNA) was immobilized on the PEI-C₃N₄/AuNW-modified electrode, followed by the CAP aptamer hybridized with cDNA. The lower signal at this time is due to the negatively charged phosphate group of the oligonucleotide and [Fe (CN)₆]^3-/4- electrostatically repelling each other. The presence of the CAP would cause aptamer on the electrode surface to fall off and be digested by Recjf exonuclease, which resulted in target recycling, and a significant increase in DPV signal can be observed at a potential of 0.176 V (vs. Ag/AgCl). Under optimal conditions, there is a linear relationship between the peak current and the logarithm of CAP concentration in the range 100 fM-1 μM, and the detection limit of this aptasensor is 2.96 fM (S/N = 3). Furthermore, the resultant aptasensor has excellent specificity, reproducibility, and long-term stability, and has been applied to the detection of CAP in milk samples. Graphical abstract The detection principle of the electrochemical aptasensor for CAP detection was based on PEI-C₃N₄/AuNWs and exonuclease-assistant signal amplification. It is based on the fact that PEI-C3N4/AuNWs nanocomposites on the surface of the electrode can effectively improve the performance of the aptasensor, and Recjf exonuclease initiates the target recycling process, causes signal amplification.

Electrochemical determination of chloramphenicol and metronidazole by using a glassy carbon electrode modified with iron, nitrogen co-doped nanoporous carbon derived from a metal-organic framework (type Fe/ZIF-8)

In this study, an iron-doped metal-organic framework (MOF) Fe/ZIF-8 was synthesized from ZIF-8 at room temperature. Direct carbonization of Fe/ZIF-8 under a nitrogen atmosphere produced nanoporous nitrogen doped carbon nanoparticles decorated with Fe component (Fe/NC). The Fe/NC exhibited a large surface area (1221.185 m² g^-1) and narrow pore-size distribution (3-5 nm). The nanoporous Fe/NC components along with Nafion were used to modify a glassy carbon electrode for the electrochemical determination of chloramphenicol and metronidazole via linear sweep voltammetry. Under optimal conditions, the reduction peak currents (observed at -0.237 V and -0.071 V vs. Ag/AgCl) of these analytes increased linearly with increasing chloramphenicol and metronidazole concentrations in the range of 0.1-100 μM and 0.5-30 μM, with the detection limits estimated to be 31 nM and 165 nM, respectively. This result was attributed to the large surface area, porous structure, high nitrogen content, and as well as the electrocatalytic effect of Fe atoms embeded in the carbon support. The proposed sensor was used for chloramphenicol and metronidazole analysis in samples, providing satisfactory results.

A Sensitive Two-Analyte Immunochromatographic Strip for Simultaneously Detecting Aflatoxin M1 and Chloramphenicol in Milk

A two-analyte immunochromatographic strip (immunostrip) was developed for the simultaneous detection of aflatoxin M1 (AFM1) and chloramphenicol (CAP) in milk. Protein conjugates (AFM1-ovalbumin (OVA) and CAP-OVA) and goat anti-rabbit IgG were respectively drawn on nitrocellulose membrane as two test lines (T₁ and T₂) and a control line (C). The immunostrip was dipped into a well that contained a 200 μL milk sample, 5 μL AFM1 antibody-gold conjugates, and 8 μL CAP antibody-gold conjugates; the whole assay was completed in 15 min and the results could be interpreted visually or using a reader. This immunostrip has cut-off levels of 0.1 ng/mL and 0.5 ng/mL for AFM1 and CAP, respectively. Analysis of CAP and AFM1 in milk samples revealed that data from the immunostrip test agreed closely with those obtained from ELISA. The two-analyte immunostrip is a rapid way for on-site simultaneous detection of AFM1 and CAP in milk.

Dual Triple Helix-Aptamer Probes for Mix-and-Read Detecting Antibiotics in Fish and Milk

Antibiotic abuse in agricultural products leads to serious food safety issues. To this end, we proposed a mix-and-read and enzyme-free amplified assay for antibiotics based on a dual triple helix-aptamer probe, potentially applicable for on-site monitoring of antibiotic residues. A dual triple helix-aptamer probe can leverage the response toward target molecules without enzyme-based amplification, rendering it sensitive and robust for profiling target molecules. The proposed assay allowed mix-and-read detection of chloramphenicol with a detection limit of 0.18 nM. Besides, it accommodated for specifically resolving chloramphenicol among other antibiotics. Chloramphenicol residual in aquatic products in fish and milk can be precisely determined. Thus, the aptamer probe deems to enrich the toolbox for managing antibiotic use.

Design and fabrication of a highly sensitive and naked-eye distinguishable colorimetric biosensor for chloramphenicol detection by using ELISA on nanofibrous membranes

Enzyme-linked immunoassay (ELISA) is highly specific and selective towards target molecules and is convenient for on-site detection. However, in many cases, lack of high sensitivity makes it hard to reveal a significant colorimetric signal for detecting a trace amount of target molecules. Thus, analytical instruments are required for detection, which limits the application of ELISA for on-site detection. In the present study, a highly sensitive and naked-eyed detectable colorimetric biosensor for chloramphenicol (CAP) was prepared by incorporating ELISA onto surfaces of microporous and nanofibrous membranes. The high specific surface areas of the nanofibers significantly increased the number of antibodies covalently linked onto the fiber surfaces and binding capacity of the sensor with antigens present in a sample. With such an integration, the sensitivity of the ELISA sensor was dramatically increased, and a trace number of targets could reveal a naked-eye detectable color. The immunoassay sensor exhibited a significant naked-eye distinguishable color to chloramphenicol (CAP) at 0.3 ng/mL. The successful design and fabrication of the nanofibrous membrane immunoassay sensor provide new paths towards the development of on-site inspection sensors without the assistance from any instrument.

Determination of Chloramphenicol in Honey Using Salting-Out Assisted Liquid-Liquid Extraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry and Validation According to 2002/657 European Commission Decision

Honey is a natural food widely consumed due to its high content in nutrients and bioactive substances. In order to prevent hive infections, xenobiotics such as pesticides and antibiotics are commonly used. Chloramphenicol (CAP) is a broad-spectrum antibiotic used to treat honeybee larvae diseases. However, CAP has toxic and nondose-dependent effects in sensitive subjects; for this reason, its use has been prohibited in food-producing animals, such as the honeybee. In this study, we proposed a rapid, simple, and cheap analytical method, based on salting-out assisted liquid-liquid extraction coupled with UHPLC MS/MS detection for the accurate determination of CAP in honey to be used in routine analyses. The parameters that influence the extraction efficiency have been optimized using an experimental design in order to maximize the recovery of the analyte by reducing the matrix effects. Therefore, the developed method was internally validated according to the 2002/657/EC Decision guidelines and applied to the analysis of 96 honey samples.

Determination of antibiotic residues in honey in relation to different potential sources and relevance for food inspection

Honey contaminations could derive from intensive agriculture and industrial activities, but also from beekeeper treatments. In EU no MRLs for antibiotics in honey are set, only a minimum required performance limit for chloramphenicol of 0.3 μg kg^-1 is recommended. Screening tests are available, characterised by their rapidity and simple use. Due to their high rate of false positives and the need to meet zero tolerance levels for antibiotics, their presence in samples was investigated using a liquid chromatography High Resolution Mass Spectrometry (LC-HRMS) multiclass antibiotic residue method, comparing the results with those of previous screening tests. The confirmatory method showed good sensitivity: CCα and CCβ ranging from 0.03 to 4.80 ng g^-1 and from 0.12 to 5.56 ng g^-1, respectively. Ninety-eight honey samples from different geographical areas, analysed by two screening tests, showed a high percentage of false positives. This is fundamental to guarantee honey safety, especially, for organic production.

Degradation of chloramphenicol by α-FeOOH-activated two different double-oxidant systems with hydroxylamine assistance

The pipe deposits from water distribution network are iron-wastes, which could be used as a catalyst of advanced oxidation processes (AOPs). This paper prepared one main composition (α-FeOOH) of pipe deposits and compared the difference of chloramphenicol (CAP) degradation by α-FeOOH-activated hydrogen peroxide/persulfate and α-FeOOH-activated hydrogen peroxide/peroxymonosulfate with hydroxylamine assistance. Several key affecting factors were investigated. The results revealed that the double-oxidant system has a synergy effect in CAP degradation process. The hydroxyl radicals were identified as the predominant radicals in two different degradation processes via electron paramagnetic resonance (EPR) technique. The possible degradation pathways and products were confirmed by liquid chromatography-mass spectrometry (LC-MS). This study provided a theoretic research for pollutant removal by taking full advantage of pipe deposits and advance the development of water quality security in water distribution network in future.

Aptamer-based fluorometric determination of chloramphenicol by controlling the activity of hemin as a peroxidase mimetic

A method for the aptamer-based determination of chloramphenicol (CAP) was developed by exploiting the peroxidase mimicking activity of hemin. The method includes two hemin-modified DNA probes termed P1 and P2. P1, which was modified at its 5' end with one hemin monomer, contains the CAP-binding sequence. The hybridization between P1 and P2 brings the two hemin monomers in close proximity, resulting in the formation of a hemin dimer with low peroxidase mimicking activity. The duplex structure was dehybridized in the presence of CAP. The formed hemin monomer featured a strong peroxidase mimicking activity and catalyzed the conversion of non-fluorescent tyramine into fluorescent dityramine by hydrogen peroxide. Fluorescence (with an excitation/emission maxima at 320 and 410 nm, respectively) increased linearly in the 0.1 ng mL-1 to 10 ng mL-1 CAP concentration range. The detection limit based on the 3σ/k criterion reached 0.07 ng mL-1. The proposed assay was successfully employed for CAP detection in (spiked) honey samples with recoveries of 94.3-117.2%. Given its high sensitivity and good stability, this method shows potential in providing a platform for antibiotic detection.

Spread of chloramphenicol and tetracycline resistance genes by plasmid mobilization in agricultural soil

Spread of antibiotic resistance genes (ARGs) poses a worldwide threat to public health and food safety. However, ARG spread by plasmid mobilization, a broad host range transfer system, in agricultural soil has received little attention. Here, we investigated the spread of chloramphenicol resistance gene (CRG) and tetracycline resistance gene (TRG) in agricultural soil by mobilization of pSUP106 under different conditions, including different concentrations of nutrients, temperatures, soil depths, rhizosphere soils, and soil types. The number of resistant bacteria isolated in non-sterilized soil from the experiments was approximately 10⁴ to 10⁷ per gram of soil, belonging to 5-10 species from four genera, including nonpathogen, opportunistic pathogen, pathogen bacteria, and gram-positive and gram-negative bacteria, depending on the experiment conditions. In sterilized soil, higher levels of nutrients and higher temperatures promoted plasmid mobilization and ARG expression. Topsoil and deep soil might not support the spread of antibiotic resistance, while ARG dissemination by plasmid mobilization was better supported by maize rhizosphere and loam soils. All these factors might change bacterial growth and the activity of bacteria and lead to the above influence. Introduction of only the donor and helper, or the donor alone also resulted in the transfer of ARGs and large numbers of antibiotic resistant bacteria (ARB), indicating that some indigenous bacteria contain the elements necessary for plasmid mobilization. Our results showed that plasmid mobilization facilitated dissemination of ARGs and ARB in soil, which led to the disturbance of indigenous bacterial communities. It is important to clear ARG dissemination routes and inhibit the spread of ARGs.

Broad spectrum detection of veterinary drugs with a highly stable metal-organic framework

The broad spectrum detection of veterinary drugs is very important for rapid and large-scale safe screen of animal-derived foods. Metal-organic frameworks (MOFs), as a kind of emerged functional porous materials are quite promising in the chemical sensing and molecular detection. In this work, we report the high-performance broad spectrum detection of 15 commonly-used veterinary drugs through the fluorescence quenching in a newly-designed chemically stable Al-based MOF, Al₃(μ₃-O)(OH)(H₂O)₂(PPTTA)_3/2 (BUT-22). To the best of our knowledge, this is the first systematic investigation for the application of MOFs in the detection/sensing of veterinary drugs through fluorescence quenching method. The quenching efficiencies of the tested veterinary drugs on BUT-22 are all beyond 82%, and the limits of detection (LOD) are low at parts per billion (ppb) levels. Interestingly, BUT-22 also enables the selective detection of nicarbazin (NIC) through the clearly-observed red shift of its maximum fluorescence emission wavelength. Moreover, the fluorescence quenching mechanism was explored with the help of theoretical calculations. Our work indicates that MOFs are favorable materials for the detection of veterinary drugs, being potentially useful in monitoring drug residues of animal-derived foods.

A simple fluorescent strategy based on triple-helix molecular switch for sensitive detection of chloramphenicol

A simple fluorescent strategy based on the formation of triple-helix molecular switch (THMS) between a signal transduction probe (STP) and an aptamer (Apt) was constructed for the determination of chloramphenicol (CAP). A weak fluorescence intensity was observed for STP solution due to the proximity of fluorophore and quencher through intramolecular DNA hybridization, causing the fluorescence quenching. The fluorescence intensity of the system was significantly enhanced after the addition of Apt. It was attributed to the formation of THMS between the Apt and STP through the Watson-Crick and Hoogsteen base pairing, resulting in the restoration of fluorescence because of the long distance between the fluorophore and quencher of STP. The fluorescence intensity of the system decreased due to the release of STP caused by the specific binding between Apt and CAP. The quantitative analysis of CAP could be achieved based on the decreased fluorescence intensity. The parameters affecting the performance of THMS including the Apt arm length, pH of buffer solution, Mg²⁺ concentration and the formation time of THMS were investigated in detail. Under the optimal conditions (Apt arm length of 9 bases, pH of 6.5, 2.5 × 10³ μmol L^-1 Mg²⁺, THMS formation time of 30 min), the decreased fluorescence intensity and the concentration of chloramphenicol were linear in the range of 5.0 × 10^-3-2.0 × 10^-1 μmol L^-1 with the correlation coefficient of 0.9963. The limit of detection was 1.2 nmol L^-1. Subsequently, the developed method was applied to the analysis of chloramphenicol in honey sample, and the recovery was between 84.5% and 103.0% with relative standard deviation less than 4.6%.

Immunoaffinity Column Cleanup with LC/MS/MS for the Determination of Chloramphenicol in Honey and Prawns: Single-Laboratory Validation

A single-laboratory validation was conducted to establish the effectiveness of an immunoaffinity column (IAC) cleanup procedure followed by LC/MS/MS for the determination of chloramphenicol (CAP) in honey and prawns. Honey is dissolved in buffer solution and centrifuged, and an aliquot applied to an IAC. For prawns, a portion of the homogenized sample is shaken with buffer and centrifuged, and an aliquot similarly applied to an IAC. For both matrix extracts, CAP is removed from the IAC with neat methanol, then directly analyzed by electrospray LC/MS/MS in the negative ionization mode using m/z 321 as a precursor ion and m/z 257 and 152 as qualifier and quantifier ions, respectively. Test portions of blank honey and prawns were fortified with CAP to give levels of 0.3, 1.0, and 5.0 μg/kg. Recoveries of CAP on 3 consecutive days ranged from 83–103% for honey and 84–108% for prawns. Based on results for fortified blank matrixes (triplicate at three levels), the RSD for repeatability (RSDr) averaged 8.4% for honey and 4.8% for prawns. The method LOD was 0.05 for prawns and 0.16 μg/kg for honey, both well below the minimum required method performance limit for CAP. The accuracy of the method was demonstrated by participation in proficiency testing, where satisfactory Z-scores were obtained for CAP in incurred samples of both honey and prawns. The method was shown to be applicable to a wide range of other matrixes, including milk, egg, royal jelly, meat, and seafood products.

Multiple signal amplification chemiluminescence immunoassay for chloramphenicol using functionalized SiO2 nanoparticles as probes and resin beads as carriers

A novel, rapid and convenient competitive immunoassay for ultrasensitive detection of chloramphenicol residues in shrimp and honey was established combined with flow injection chemiluminescence. The carboxylic resin beads were used as solid phase carriers to load with more coating antigen due to their larger specific surface area and good biocompatibility. The surface of the silica dioxide nanoparticles was modified with aldehyde group to combine with more horseradish peroxidase and the chloramphenicol antibody. There was a competitive process between the chloramphenicol in solution and the immobilized coating antigen to combine with the limited binding site of antibody to form the immunocomplex. Silica dioxide nanoparticles played an important role in enhancing chemiluminescence signal, because the horseradish peroxidase on SiO₂ effectively catalyzed the system of luminol-PIP-H₂O₂. Under optimal conditions, the chemiluminescence intensity decreased linearly with the logarithm of the chloramphenicol concentration in the range of 0.0001 to 100 ng mL^-1 and the detection limit (3σ) was 0.033 pg mL^-1. This immunosensor demonstrated acceptable stability, high specificity and reproducibility. The horseradish peroxidase-silica dioxide nanoparticle-chloramphenicol antibody complex successfully prepared in this article was firstly applied to the detection of chloramphenicol, and had extremely important meanings for the application of nanoparticles and enzymatic catalysis in the field of chemiluminescence.

Facile sonochemical synthesis of porous and hierarchical manganese(III) oxide tiny nanostructures for super sensitive electrocatalytic detection of antibiotic (chloramphenicol) in fresh milk

We report the preparation of a porous and hierarchical manganese(III) oxide tiny nanostructures (Mn₂O₃ TNS) by a simple sonochemical approach. The nanocatalyst was synthesized by a bath-type ultrasound washer (Honda Electronics, W-118T) at 700 W and 300 kHz frequency. The morphology and chemical composition of the nanocatalyst were characterized by X-rays diffractometry (XRD), transmission electron microscopy (TEM), energy dispersive x-rays (EDX), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The electrocatalytic activity (ECA) was monitored by detection of toxic antibiotic drug (chloramphenicol) under phosphate buffer (pH 7.0). A facile sonochemical route was employed to prepare Mn₂O₃ TNS modified electrode. The screen-printed carbon electrode (SPCE) modified with Mn₂O₃ TNS was fabricated and applied for the electrochemical determination of chloramphenicol. Compared with bare SPCE, Mn₂O₃ TNS modified SPCE showed highest current response towards chloramphenicol. Furthermore, the modified sensor exhibits with a sharp peak and two linear ranges by using DPV (i) 0.015-1.28 μM with the sensitivity of 4.167 μA μM^-1 cm^-2 and (ii) 1.35-566.3 μM with the sensitivity of 7.205 μA μM^-1 cm^-2. Notably, we achieved a very low-level detection limit of 4.26 nM for the DPV detection of chloramphenicol. Further, the superior practicability of the nanosheets modified sensor can be used for real time sensing of chloramphenicol with good recover ranges.

Degradation of antibiotic chloramphenicol in water by pulsed discharge plasma combined with TiO2/WO3 composites: mechanism and degradation pathway

Pulsed discharge plasma (PDP) combined with TiO₂/WO₃ composites for chloramphenicol (CAP) degradation was investigated. The prepared TiO₂/WO₃ composites were characterized by scanning electron microscope, transmission electron microscope, nitrogen adsorption apparatus, zeta sizer, X-ray diffraction, Raman spectra, UV-Vis absorption spectroscopy, X-ray photoelectron spectroscopy, photocurrent and electrochemical impedance spectroscopy. The degradation performance showed that the addition of TiO₂/WO₃ composites significantly enhanced the removal efficiency of CAP in PDP system. At a peak voltage of 18 kV, the highest removal efficiency of CAP could reach 88.1% in PDP system with 4 wt% TiO₂/WO₃, which was 36.8% and 26.0% higher than that in sole PDP system and PDP/TiO₂ system, respectively. The TiO₂/WO₃ composites significantly accelerated interfacial charge transfer process compared to the pure TiO₂. Besides, the effect of catalyst dosage and peak voltage on CAP removal was evaluated. OH, O₃O₂^-, h⁺ and high-energy electrons contributed to CAP degradation in PDP-TiO₂/WO₃ system. Addition of TiO₂/WO₃ composites can decompose O₃ and produce more OH and H₂O₂. The degradation intermediates were measured by liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC). The cycling degradation experiment showed that the TiO₂/WO₃ composites have good reusability as well as stability.

Development of a multicomponent immunochromatographic test system for the detection of fluoroquinolone and amphenicol antibiotics in dairy products

BACKGROUND

Ciprofloxacin (CIP) and chloramphenicol (CAP) are relevant antibiotics of the fluoroquinolone (FQ) and amphenicol (AP) groups, respectively, widely used in veterinary practice and they contaminate agricultural products. In this study, a rapid and sensitive immunochromatographic assay (ICA) was developed for simultaneous detection of CIP and CAP in dairy products. The ICA was carried out in a direct competitive format using gold nanoparticles as a label.

RESULTS

The ICA developed here allowed for the detection of CIP and CAP in Triton X-100-containing buffered saline (PBST) within 15 min with instrumental detection limits of 20 pg mL^-1 and 0.5 ng mL^-1 , respectively, and with a visual detection limit of 5 ng mL^-1 for both antibiotics. The ICA showed cross-reactivity (69-160%) to 19 antibiotics in the FQ group and no cross-reactivity (<0.1%) to 2 antibiotics of the AP group. The ICA allowed detection of CIP and CAP in a panel of dairy products by employing a simple procedure of preliminary sample preparation. The detection limits for the two antibiotics were the same as in PBST. The analytical recoveries of CIP and CAP in dairy products ranged from 83% to 120%.

CONCLUSION

The analytical characteristics of the test system allow its use for the detection of antibiotics in milk and dairy products during all steps of production. © 2019 Society of Chemical Industry.

Development and comparison of liquid-liquid extraction and accelerated solvent extraction methods for quantitative analysis of chloramphenicol, thiamphenicol, florfenicol, and florfenicol amine in poultry eggs

Accelerated solvent extraction was investigated as a novel alternative technology for the separation and quantitative analysis of chloramphenicol, thiamphenicol, florfenicol, and florfenicol amine from poultry eggs, and the results were compared with the results of liquid-liquid extraction. Rapid quantification of the target compounds was carried out by ultra-performance liquid chromatography-electrospray ionization tandem triple quadrupole mass spectrometry. This optimized method was validated according to the requirements defined by the European Union and the United States Food and Drug Administration. Finally, the new approach was successfully applied to the quantitative determination of these analytes in 90 commercial poultry eggs from local supermarkets.

Response of antibiotic resistance to the co-existence of chloramphenicol and copper during bio-electrochemical treatment of antibiotic-containing wastewater

Concerns have been raised regarding co-selection for antibiotic resistance among microorganisms exposed to antibiotics and metals. As a promising approach for treating antibiotics and heavy metal-containing wastewater, a bio-electrochemical system (BES) can be used for antibiotic and heavy metal removal. This study determined the fate of antibiotic resistance genes (ARGs) in a BES when exposed to chloramphenicol (CAP) and Cu²⁺. The ARGs encoding the efflux pump (cmlA, floR, and tetC), the class 1 integron integrase-encoding gene, and the sul1 gene were analyzed. The results indicated that the co-existence of CAP and different concentrations of Cu²⁺ had significant influence on the relative abundances of the ARGs. The changes in the bacterial community structure and the results of a quantitative correlation analysis between the bacterial community and the ARGs confirmed that the shift in the potential hosts was the key reason for the changes of the ARGs. This study sheds new light on the mechanisms of ARGs variations in BES under the co-selection pressure of antibiotics and heavy metals.

Solution growth of 1D zinc tungstate (ZnWO4) nanowires; design, morphology, and electrochemical sensor fabrication for selective detection of chloramphenicol

Development of 1D nanostructures with novel morphology is a recent scientific attraction, so to say yielding unusual materials for advanced applications. In this work, we have prepared solution grown, single-pot 1D ZnWO₄ nanowires (NWs) and the morphology is assessed for label-free but selective detection of chloramphenicol. This is the first report where, such structures are being investigated for this purpose. Transmission electron microscopy shows the presence of strands of ZnWO₄ of about 20 nm in diameter. The formed NWs were highly dispersed in nature with uniform size and shape. X-ray diffraction analysis confirmed high purity of the designed NWs despite solution synthesis. X-ray photoelectron spectroscopy confirmed surface valence state of ZnWO₄. Fourier transform infrared spectroscopy was employed for the ascription of functional groups, whereas, optical properties were investigated using photoluminescence. NWs were employed for the detection of a model antibiotic, chloramphenicol. The developed sensor exhibited excellent limit of detection, 0.32 μM and 100% specificity as compared to its structural and functional analogues such as thiamphenicol and clindamycin. This work can broaden new opportunities for the researchers to explore unconventional nanomaterials bearing unique morphologies and quantum phenomenon for the label-free detection of other bioanalytes.

Physicochemical characterization and determination of chloramphenicol residues and heavy metals in Algerian honeys

The concentration of certain heavy metals in various foods (fruits, cereals, legumes, and bee products) produced in industrial and urban cities is increasing each year following industrial development. Quality of honey and its contamination by different polluting agents are related essentially to its production environment, or it can arise from beekeeping practices. In the present study, the determination of physicochemical properties: moisture, pH, total acidity, electric conductivity, hydroxymethylfurfural (HMF), sugars, and chloramphenicol (CAP) residues; the metal content by determination of two toxic metals levels: lead (Pb) and cadmium (Cd); and other trace elements: magnesium (Mg), iron (Fe), zinc (Zn), copper (Cu), and nickel (Ni) in 23 different honey samples collected from North regions of Algeria were investigated. The physicochemical properties and the metal contents were found within the ranges established by the international standards. For the antibiotic residues, only four honey samples are contaminated by CAP. Metals were found in non-significant values and are in safety baseline levels for human consumption except Mg which exceed the limits. These results suggested that honey could be used as an indicator to detect contaminating agents from the environment since bees are excellent sentinels for assessing environmental contamination because of their physiological and biological characteristics.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.

Synthesis and Characterization of Samarium-Substituted Molybdenum Diselenide and Its Graphene Oxide Nanohybrid for Enhancing the Selective Sensing of Chloramphenicol in a Milk Sample

The electronic conductivity and electrocatalytic activity of metal chalcogenides are normally enhanced by following the ideal strategies such as substitution/doping of heterogeneous atoms and hybridization of highly conductive carbon supportive materials. Here, a rare earth element (samarium) was substituted with MoSe₂ using the simple hydrothermal method. The lattice distortion due to the substitution of Sm³⁺ with MoSe₂ was clearly observed by using high-resolution transmission electron microscopy analysis. As a consequence, the prepared SmMoSe₂ nanorod was encapsulated with graphene oxide (GO) sheets by using ultrasonication process. Furthermore, the GO-encapsulated SmMoSe₂ nanocomposite modified glassy carbon electrode (GO@SmMoSe₂/GCE) was used for the sensing of chloramphenicol. The results showed that the GO@SmMoSe₂/GCE revealed the superior electrocatalytic activity with low detection (5 nM) and sensitivity (20.6 μA μM^-1 cm^-2) to electrochemical detection of proposed analyte. It indicates that the substitution of Sm³⁺ and encapsulation of GO significantly increased both the electrical conductivity and electrocatalytic activity of MoSe₂.

Porous SnO2 nanoparticles based ion chromatographic determination of non-fluorescent antibiotic (chloramphenicol) in complex samples

Nowadays, there are rising concerns about the extensive use of the antibiotics such as chloramphenicol (CAP), has threatened the human life in the form of various vicious diseases. The limited selectivity and sensitivity of confirmatory techniques (UV and electrochemical) and non-fluorescence property of CAP make its determination a challenging task in the modern pharmaceutical analysis. In order to redeem the selective, sensitive and cost-effective fluorescence methodology, here by the dual role of synthesized porous SnO2 nanoparticles were exploited; (i) a porous sorbent in a µ-QuEChERS based sample preparation and as (ii) a stimulant for the transformation of non-fluorescent analytes namely CAP and p-nitrophenol (p-NP) into their respective fluorescent product. We report a green, simple, selective and cost effective ion chromatographic method for CAP sensitive determination in three complex matrices including milk, human urine and serum. The synthesized sorbent not only selectively adsorbed and degraded the matrix/interferences but also selectively reduced the non-fluorescent antibiotic CAP into a fluorescent species. This developed ion chromatographic method exhibited good selectivity, linearity (r2 ≥ 0.996) and limit of detection (LOD) was in the range 0.0201-0.0280 µg/kg. The inter- and intraday precisions were also satisfactory having a relative standard deviation (RSDs) less than 14.96% and excellent recoveries of CAP in the range of 78.3-100.2% were retrieved in various complex samples.