Flake-like structure of SrTiO3 nanoparticles dispersed on graphene oxide: A selective and sensitive electrochemical sensor for determination of chloramphenicol in milk and honey samples

The use of Chloramphenicol (CAP), a potent antibiotic with broad-spectrum capabilities in food-producing animals has been restricted by the European Union and several other countries due to its severe side effects. Thus, CAP must be detected quickly and sensitively. In this investigation, the preparation of SrTiO3 nanoparticles was carried out utilizing a hydrothermal technique. The as-synthesized strontium titanate was decorated on the graphene oxide (SrTiO3/GO) using an ultrasonication method. An electrochemical sensor was developed by employing a modified electrode consisting of SrTiO3/GO, which can accurately detect CAP in food samples. The synergistic effect of SrTiO3 and GO could improve the peak current response. Remarkably, the SrTiO3/GO-modified glassy carbon electrode has a LOD and sensitivity of 6.08 µM nM and 2.771 µA·μM-1·cm-2, respectively. This modified electrode was evaluated in food samples and had an outstanding reaction with a high percentage of recovery, which makes it a potential electrocatalyst for CAP detection.

Superaerophobic/Superhydrophilic Multidimensional Electrode System for High-Current-Density Water Electrolysis

Water electrolysis is emerging as a promising renewable-energy technology for the green production of hydrogen, which is a representative and reliable clean energy source. From economical and industrial perspectives, the development of earth-abundant non-noble metal-based and bifunctional catalysts, which can simultaneously exhibit high catalytic activities and stabilities for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), is critical; however, to date, these types of catalysts have not been constructed, particularly, for high-current-density water electrolysis at the industrial level. This study developed a heterostructured zero-dimensional (0D)-one-dimensional (1D) PrBa0.5Sr0.5Co1.5Fe0.5O5+δ (PBSCF)-Ni3S2 as a self-supported catalytic electrode via interface and morphology engineering. This unique heterodimensional nanostructure of the PBSCF-Ni3S2 system demonstrates superaerophobic/superhydrophilic features and maximizes the exposure of the highly active heterointerface, endowing the PBSCF-Ni3S2 electrode with outstanding electrocatalytic performances in both HER and OER and exceptional operational stability during the overall water electrolysis at high current densities (500 h at 500 mA cm-2). This study provides important insights into the development of catalytic electrodes for efficient and stable large-scale hydrogen production systems.

Green approach for the fabrication of dual-functional S/N doped graphene tagged ZnO nanograins for in vitro bioimaging and water pollutant remediation

Dual-functional S/N (sulfur and nitrogen) doped graphene-tagged zinc oxide nanograins were synthesized for bioimaging applications and light-dependent photocatalytic activity. Applying the green synthesis approach, graphene was synthesized from kimchi cabbage through a hydrothermal process followed by tagging it with synthesized zinc oxide nanoparticles (ZnO-NPs). The 2D/0D heterostructure prepared by combining both exhibited exceptional advantages. Comprehensive characterizations such as TEM, SEM, XRD, FTIR, XPS, and UV-Vis spectra have been performed to confirm the structures and explore the properties of the synthesized nanocomposite. The graphene/ZnO-NP composite produced exhibited more intense fluorescence, greater chemical stability and biocompatibility, lower cytotoxicity, and better durability than ZnO NPs conferring them with potential applications in cellular imaging. While tagging the ZnO NPs with carbon derived from a natural source containing hydroxyl, sulfur, and nitrogen-containing functional group, the S/N doped graphene/ZnO heterostructure evidences the high photocatalytic activity under UV and visible irradiation which is 3.2 and 3.8 times higher than the as-prepared ZnO-NPs. It also demonstrated significant antibacterial activity which confers its application in removing pathogenic contaminant bacteria in water bodies. In addition, the composite had better optical properties and biocompatibility, and lower toxicity than ZnO NPs. Our findings indicate that the synthesized nanocomposite will be suitable for various biomedical and pollutant remediation due to its bright light-emitting properties and stable fluorescence.

Novel Heterostructure-Based CoFe and Cobalt Oxysulfide Nanocubes for Effective Bifunctional Electrocatalytic Water and Urea Oxidation

The development of effective oxygen evolution reaction (OER) and urea oxidation reaction (UOR) on heterostructure electrocatalysts with specific interfaces and characteristics provides a distinctive character. In this study, heterostructure nanocubes (NCs) comprising inner cobalt oxysulfide (CoOS) NCs and outer CoFe (CF) layered double hydroxide (LDH) are developed using a hydrothermal methodology. During the sulfidation process, the divalent sulfur ions (S2- ) are released from the breakdown of the sulfur source and react with the Co-precursors on the surface leading to the transformation of CoOH nanorods into CoOS nanocubes. Further, X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) analyses reveal that the interactions at the interface of the CF@CoOS NCs significantly altered the electronic structure, thus enhancing the electrocatalytic performance. The optimal catalysts exhibited effective OER and UOR activities, the attained potentials are 1.51 and 1.36 V. This remarkable performance is attributable to the induction of electron transfer from the CoFe LDH to CoOS, which reduces the energy barrier of the intermediates for the OER and UOR. Furthermore, an alkaline water and urea two-cell electrolyzer assembled using CF@CoOS-2 NCs and Pt/C as the anode and cathode requires a cell voltage of 1.63 and 1.56 V along with a durability performance.

Universal Platform for Robust Dual-Atom Doped 2D Catalysts with Superior Hydrogen Evolution in Wide pH Media

Layered 2D transition metal dichalcogenides (TMDs) have been suggested as efficient substitutes for Pt-group metal electrocatalysts in the hydrogen evolution reaction (HER). However, poor catalytic activities in neutral and alkaline electrolytes considerably hinder their practical applications. Furthermore, the weak adhesion between TMDs and electrodes often impedes long-term durability and thus requires a binder. Here, a universal platform is reported for robust dual-atom doped 2D electrocatalysts with superior HER performance over a wide pH range media. V:Co-ReS2 on a wafer scale is directly grown on oxidized Ti foil by a liquid-phase precursor-assisted approach and subsequently used as highly efficient electrocatalysts. The catalytic performance surpasses that of Pt group metals in a high current regime (≥ 100 mA cm-2 ) at pH ≥ 7, with a high durability of more than 70 h in all media at 200 mA cm-2 . First-principles calculations reveal that V:Co dual doping in ReS2 significantly reduces the water dissociation barrier and simultaneously enables the material to achieve the thermoneutral Gibbs free energy for hydrogen adsorption.

[Clinical research of multisystem inflammatory syndrome in children]

Objective: To analyze the clinical characteristics of children with multisystem inflammatory syndrome (MIS-C) associated with SARS-CoV-2 in China, and to improve the understanding of MIS-C among pediatricians. Methods: Case series study.Collect the clinical characteristics, auxiliary examinations, treatment decisions, and prognosis of 64 patients with MIS-C from 9 hospitals in China from December 2022 to June 2023. Results: Among the 64 MIS-C patients, 36 were boys and 28 were girls, with an onset age being 2.8 (0.3, 14.0) years. All patients suffered from fever, elevated inflammatory indicators, and multiple system involvement. Forty-three patients (67%) were involved in more than 3 systems simultaneously, including skin mucosa 60 cases (94%), blood system 52 cases (89%), circulatory system 54 cases (84%), digestive system 48 cases (75%), and nervous system 24 cases (37%). Common mucocutaneous lesions included rash 54 cases (84%) and conjunctival congestion and (or) lip flushing 45 cases (70%). Hematological abnormalities consisted of coagulation dysfunction 48 cases (75%), thrombocytopenia 9 cases (14%), and lymphopenia 8 cases (13%). Cardiovascular lesions mainly affected cardiac function, of which 11 patients (17%) were accompanied by hypotension or shock, and 7 patients (12%) had coronary artery dilatation.Thirty-six patients (56%) had gastrointestinal symptoms, 23 patients (36%) had neurological symptoms. Forty-five patients (70%) received the initial treatment of intravenous immunoglobulin in combination with glucocorticoids, 5 patients (8%) received the methylprednisolone pulse therapy and 2 patients (3%) treated with biological agents, 7 patients with coronary artery dilation all returned to normal within 6 months. Conclusions: MIS-C patients are mainly characterized by fever, high inflammatory response, and multiple organ damage. The preferred initial treatment is intravenous immunoglobulin combined with glucocorticoids. All patients have a good prognosis.

The potential role of formononetin in cancer treatment: An updated review

Currently, cancer is one of the main research topics, due to its high incidence and drug resistance to existing anti-cancer drugs. Formononetin, a natural product with phytoestrogenic properties and diverse biological functions, has attracted the attention of researchers working on anticancer drugs. Formononetin emerges as an intriguing bioactive substance compared to other isoflavones as it exhibits potent chemotherapeutic activity with less toxicity. Formononetin effectively plays a significant role in inhibiting cell proliferation, invasion, and metastatic abilities of cancer cells by targeting major signaling pathways at the junction of interconnected pathways. It also induces apoptosis and cell cycle arrest by modulating mediator proteins. It causes upregulation of key factors such as p-AKT, p38, p21, and p53 and downregulation of NF-κB. Furthermore, formononetin regulates the neoplastic microenvironment by inactivating the ERK1/2 pathway and lamin A/C signaling and has been reported to inactivate JAK/STAT, PKB or AKT, and mitogen-activated protein kinase pathways and to suppress cell migration, invasion, and angiogenesis in human cancer cells. To assist researchers in further exploring formononetin as a potential anticancer therapeutic candidate, this review focuses on both in vitro and in vivo proof of concept studies, patents, and clinical trials pertinent to formononetin's anticancer properties. Overall, this review discusses formononetin from a comprehensive perspective to highlight its potential benefits as an anticancer agent.

Layered hydrated-titanium-oxide-laden reduced graphene oxide composite as a high-performance negative electrode for selective extraction of Li via membrane capacitive deionization

In this work, we initially prepared layered lithium titanate (Li2TiO3) using a solid-state reaction. Then Li+ of Li2TiO3 were acid-eluded with Hydrochloric acid to obtain hydrated titanium oxide (H2TiO3). Different weight percentages (50%, 60%, 70%, 80%, and 90%) of the as-prepared H2TiO3 were deposited on a conductive reduced graphene oxide (rGO) matrix to obtain a series of rGO/ H2TiO3 composites. Of the prepared composites, rGO/H2TiO3-60% showed excellent current density, high specific capacitance, and rapid ion diffusion. An asymmetric MCDI (membrane capacitive deionization) cell fabricated with activated carbon as the anode and rGO/H2TiO3-60% as the cathode displayed outstanding Li+ electrosorption capacity (13.67 mg g-1) with a mean removal rate of 0.40 mg g-1 min-1 in a 10 mM LiCl aqueous solution at 1.8 V. More importantly, the rGO/H2TiO3-60% composite electrode exhibited exceptional Li+ selectivity, superior cyclic stability up to 100,000 s, and a Li+ sorption capacity retention of 96.32% after 50 adsorption/desorption cycles. The excellent Li+ extraction obtained by MCDI using the rGO/H2TiO3-60% negative electrode was putatively attributed to: (i) ion exchange between Li+ and H+ of H2TiO3; (ii) the presence of narrow lattice spaces in H2TiO3 suitable for selective Li+ capture; (iii) capture of Li+ by isolated and hydrogen-bonded hydroxyl groups of H2TiO3; and (iv) enhanced interfacial contact and transfer of large numbers of Li+ ions from the electrolyte to H2TiO3 achieved by compositing H2TiO3 with a highly conductive rGO matrix.

Zn-ion Batteries: Charge Storing Mechanism and Development Challenges

Improving the energy share of renewable energy technologies is the only solution to reduce greenhouse gas emissions and air pollution. The high-performing green battery energy storage technologies are critical for storing energy to address the intermittent nature of renewable energy resources. In recent years, aqueous batteries, particularly Zn-ion batteries (ZIBs), have achieved and shown great potential for stationary energy storage systems owing to their low cost and safer operation. However, the practical applications of the ZIBs have significantly been impeded due to the gap between the breakthroughs achieved in academic research and industrial developments. The present review discusses the ZIB's advantages, possibilities, and shortcomings for stationary energy storage systems. The Review begins with a brief introduction to the ZIBs and their charge storage mechanisms based on the structural properties of cathode materials. The scientific and technical challenges that obstruct the commercialization of the ZIBs are discussed in detail concerning their impact on accelerating the utilization of the ZIBs for real-life applications. The final section highlights the outlook on research in this flourishing field.

WS2-intercalated Ti3C2Tx MXene/TiO2-stacked hybrid structure as an excellent sonophotocatalyst for tetracycline degradation and nitrogen fixation

Designing a heterostructure nanoscale catalytic site to facilitate N2 adsorption and photogenerated electron transfer would maximize the potential for photocatalytic activity and N2 reduction reactions. Herein, we have explored the interfacial TiO2 nanograins between the Ti3C2TxMXene-WS2 heterostructure and addressed the beneficial active sites to expand the effective charge transfer rate and promote sonophotocatalytic N2 fixation. Benefiting from the interfacial contact and dual heterostructure interface maximizes the photogenerated carrier separation between WS2 and MXene/TiO2. The sonophotocatalytic activity of the MXene@TiO2/WS2 hybrid, which was assessed by examining the photoreduction of N2 with ultrasonic irradiation, was much higher than that of either sonocatalytic and photocatalytic activity because of the synergistic sonocatalytic effect under photoirradiation. The Schottky junction between the MXene and TiO2 on the hybrid MXene/TiO2-WS2 heterostructure resulted in the sonophotocatalytic performance through effective charge transfer, which is 1.47 and 1.24 times greater than MXene-WS2 for nitrogen fixation and pollutant degradation, respectively. Under the sonophotocatalytic process, the MXene/TiO2-WS2 heterostructure exhibits a decomposition efficiency of 98.9 % over tetracycline in 90 min, which is 5.46, 1.73, and 1.10 times greater than those of sonolysis, sonocatalysis, and photocatalysis, respectively. The production rate of NH3 on MXene/TiO2-WS2 reached 526 μmol g-1h-1, which is 3.17, 3.61, and 1.47 times higher than that of MXene, WS2, and MXene-WS2, respectively. The hybridized structure of MXene-WS2 with interfacial surface oxidized TiO2 nanograins minimizes the band potential and improves photocarrier use efficiency, contributing directly to the remarkable catalytic performance towards N2 photo fixation under visible irradiation under ultrasonic irradiation. This report provides the strategic outcome for the mass carrier transfer rate and reveals a high conversion efficiency in the hybridized heterostructure.

Recent Progress in Functional Nanomaterials towards the Storage, Separation, and Removal of Tritium

Tritium is a sustainable next-generation prime fuel for generating nuclear energy through fusion reactions to fulfill the increasing global energy demand. Owing to the scarcity-high demand tradeoff, tritium must be bred inside a fusion reactor to ensure sustainability and must therefore be separated from its isotopes (protium and deuterium) in pure form, stored safely, and supplied on demand. Existing multistage isotope separation technologies exhibit low separation efficiency and require intensive energy inputs and large capital investments. Furthermore, tritium-contaminated heavy water constitutes a major fraction of nuclear waste, and accidents like the one at Fukushima Daiichi leave behind thousands of tons of diluted tritiated water, whose removal is beneficial from an environmental point of view. In this review, the recent progress and main research trends in hydrogen isotope storage and separation by focusing on the use of metal hydride (e.g., intermetallic, and high-entropy alloys), porous (e.g., zeolites and metal organic frameworks (MOFs)), and 2-D layered (e.g., graphene, hexagonal boron nitride (h-BN), and MXenes) materials to separate and store tritium based on their diverse functionalities are discussed. Finally, the challenges and future directions for implementing tritium storage and separation are summarized in the reviewed materials.

Origin of Li+ Solvation Ability of Electrolyte Solvent: Ring Strain

Developing new organic solvents to support the use of Li metal anodes in secondary batteries is an area of great interest. In particular, research is actively underway to improve battery performance by introducing fluorine to ether solvents, as these are highly compatible with Li metal anodes because fluorine imparts high oxidative stability and relatively low Li-ion solvation ability. However, theoretical analysis of the solvation ability of organic solvents mostly focuses on the electron-withdrawing capability of fluorine. Herein, we analyze the effect of the structural characteristics of solvents on their Li+ ion solvation ability from a computational chemistry perspective. We reveal that the structural constraints imposed on the oxygen binding sites in solvent molecules vary depending on the structural characteristics of the N-membered ring formed by the interaction between the organic solvent and Li+ ions and the internal ring containing the oxygen binding sites. We demonstrate that the structural strain of the organic solvents has a comparable effect on Li+ solvation ability seen for the electrical properties of fluorine elements. This work emphasizes the importance of understanding the structural characteristics and strain when attempting to understand the interactions between solvents and metal cations and effectively control the solvation ability of solvents.

First-Principles Dynamics Investigation of Germanium as an Anode Material in Multivalent-Ion Batteries

Germanium, a promising electrode material for high-capacity lithium ion batteries (LIBs) anodes, attracted much attention because of its large capacity and remarkably fast charge/discharge kinetics. Multivalent-ion batteries are of interest as potential alternatives to LIBs because they have a higher energy density and are less prone to safety hazards. In this study, we probed the potential of amorphous Ge anodes for use in multivalent-ion batteries. Although alloying Al and Zn in Ge anodes is thermodynamically unstable, Mg and Ca alloys with Ge form stable compounds, Mg2.3Ge and Ca2.4Ge that exhibit higher capacities than those obtained by alloying Li, Na, or K with Ge, corresponding to 1697 and 1771 mA·h·g-1, respectively. Despite having a slightly lower capacity than Ca-Ge, Mg-Ge shows an approximately 150% smaller volume expansion ratio (231% vs. 389%) and three orders of magnitude higher ion diffusivity (3.0 × 10-8 vs. 1.1 × 10-11 cm2 s-1) than Ca-Ge. Furthermore, ion diffusion in Mg-Ge occurs at a rate comparable to that of monovalent ions, such as Li+, Na+, and K+. The outstanding performance of the Mg-Ge system may originate from the coordination number of the Ge host atoms and the smaller atomic size of Mg. Therefore, Ge anodes could be applied in multivalent-ion batteries using Mg2+ as the carrier ion because its properties can compete with or surpass monovalent ions. Here, we report that the maximum capacity, volume expansion ratio, and ion diffusivities of the alloying electrode materials can be understood using atomic-scale structural properties, such as the host-host and host-ion coordination numbers, as valuable indicators.

Synergistic effects of layered Ti3C2TX MXene/MIL-101(Cr) heterostructure as a sonocatalyst for efficient degradation of sulfadiazine and acetaminophen in water

In this work, different mass loadings of MXene-coupled MIL-101(Cr) (MXe/MIL-101(Cr)) nanocomposites were generated through a hydrothermal process in order to investigate the potential of this nanocomposite as a novel sonocatalyst for the elimination of sulfadiazine (SD) and acetaminophen (AAP) in aqueous media. The sonocatalytic activity of different MXe/MIL-101(Cr) compositions and surface functionalities was investigated. In addition, the sonocatalytic activities at various pH values, temperatures, pollutant concentrations, catalyst dosages, initial H2O2 concentrations, and organic matter contents were investigated. The experiments on the sonocatalytic elimination of SD and AAP revealed that MXe/MIL-101(Cr) exhibited a catalytic efficiency of ∼ 98% in 80 min when the MXene loading was 30 wt% in the nanocomposite. Under optimized reaction conditions, the degradation efficiency of MXe/MIL-101(Cr) reached 91.5% for SD and 90.6% for AAP in 60 min; these values were 1.2 and 1.8 times greater than those of MXene and MIL-101(Cr), respectively. The high surface area of the MXe/MIL-101(Cr) nanocomposite increased from 4.68 m2/g to 294.21 m2/g, and the band gap of the tagged MIL-101(Cr) on the MXene surface was minimized. The superior sonocatalytic activity of MXe/MIL-101(Cr) was attributed to the effective contact interface, the effective separation rate of e- - h+ pairs through the type II heterostructure interface, and the favorable high free •OH radical production rates that promoted the degradation of SD and AAP. The solid heterointerface between MIL-101(Cr) and MXene was confirmed through Raman and FTIR analysis and was found to promote accessible •OH radical production under sonication, thus maximizing the catalytic activity of nanocomposites. The present results present an effective strategy for the design of a highly efficient, low-cost, reliable sonocatalyst that can eradicate pharmaceutical pollutants in our environment.

Genetic descriptor search algorithm for predicting hydrogen adsorption free energy of 2D material

Transition metal dichalcogenides (TMDs) have emerged as a promising alternative to noble metals in the field of electrocatalysts for the hydrogen evolution reaction. However, previous attempts using machine learning to predict TMD properties, such as catalytic activity, have been shown to have limitations in their dependence on large amounts of training data and massive computations. Herein, we propose a genetic descriptor search that efficiently identifies a set of descriptors through a genetic algorithm, without requiring intensive calculations. We conducted both quantitative and qualitative experiments on a total of 70 TMDs to predict hydrogen adsorption free energy ([Formula: see text]) with the generated descriptors. The results demonstrate that the proposed method significantly outperformed the feature extraction methods that are currently widely used in machine learning applications.

Engineering the Local Atomic Configuration in 2H TMDs for Efficient Electrocatalytic Hydrogen Evolution

The introduction of heteroatoms is a widely employed strategy for electrocatalysis of transition metal dichalcogenides (TMDs). This approach activates the inactive basal plane, effectively boosting the intrinsic catalytic activity. However, the effect of atomic configurations incorporated within the TMDs' lattice on catalytic activity is not thoroughly understood owing to the lack of controllable synthetic approaches for highly doped TMDs. In this study, we demonstrate a facile approach to realizing heavily doped MoS₂ with a high doping concentration above 16% via intermediate-reaction-mediated chemical vapor deposition. As the V doping concentration increased, the incorporated V atoms coalesced in a manner that enabled both the basal plane activation and electrical conductivity enhancement of MoS₂. This accelerated the kinetics of the hydrogen evolution reaction (HER) through the reduced Gibbs free energy of hydrogen adsorption, as evidenced by experimental and theoretical analyses. Consequently, the coalesced V-doped MoS₂ exhibited superior HER performance, with an overpotential of 100 mV at 10 mA cm^-2, surpassing the pristine and single-atom-doped counterparts. This study provides an intriguing pathway for engineering the atomic doping configuration of TMDs to develop efficient 2D nanomaterial-based electrocatalysts.

The role of NF-κB in breast cancer initiation, growth, metastasis, and resistance to chemotherapy

Breast cancer (BC) is the second most fatal disease and is the prime cause of cancer allied female deaths. BC is caused by aberrant tumor suppressor genes and oncogenes regulated by transcription factors (TFs) like NF-κB. NF-κB is a pro-inflammatory TF that crucially alters the expressions of various genes associated with inflammation, cell progression, metastasis, and apoptosis and modulates a network of genes that underlie tumorigenesis. Herein, we focus on NF-κB signaling pathways, its regulators, and the rationale for targeting NF-κB. This review also includes TFs that maintain NF-κB crosstalk and their roles in promoting angiogenesis and metastasis. In addition, we discuss the importance of combination therapies, resistance to treatment, and potential novel therapeutic strategies including nanomedicine that targets NF-κB.

HOTAIR: a potential metastatic, drug-resistant and prognostic regulator of breast cancer

HOX transcript antisense intergenic RNA (HOTAIR) is an oncogenic non-coding RNA whose expression is strongly correlated with the tumor grade and prognosis of a variety of carcinomas including breast cancer (BC). HOTAIR regulates various target genes via sponging and epigenetic mechanisms and controls various oncogenic cellular and signaling mechanisms including metastasis and drug resistance. In BC cells, HOTAIR expression is regulated by a variety of transcriptional and epigenetic mechanisms. In this review, we describe the regulatory mechanisms that govern HOTAIR expression during cancer development and explore how HOTAIR drives BC development, metastasis, and drug resistance. In the final section of this review, we focus on the role of HOTAIR in BC management, therapeutic treatment, and prognosis, highlighting its potential therapeutic applications.

Multi-order graph attention network for water solubility prediction and interpretation

The water solubility of molecules is one of the most important properties in various chemical and medical research fields. Recently, machine learning-based methods for predicting molecular properties, including water solubility, have been extensively studied due to the advantage of effectively reducing computational costs. Although machine learning-based methods have made significant advances in predictive performance, the existing methods were still lacking in interpreting the predicted results. Therefore, we propose a novel multi-order graph attention network (MoGAT) for water solubility prediction to improve the predictive performance and interpret the predicted results. We extracted graph embeddings in every node embedding layer to consider the information of diverse neighboring orders and merged them by attention mechanism to generate a final graph embedding. MoGAT can provide the atomic-specific importance scores of a molecule that indicate which atoms significantly influence the prediction so that it can interpret the predicted results chemically. It also improves prediction performance because the graph representations of all neighboring orders, which contain diverse range of information, are employed for the final prediction. Through extensive experiments, we demonstrated that MoGAT showed better performance than the state-of-the-art methods, and the predicted results were consistent with well-known chemical knowledge.

A Novel and Cost-Effective CsVO3 Quantum Dots for Optoelectronic and Display Applications

Quantum dots (QDs) have an unparalleled ability to mimic true colors due to their size-tunable optical and electronic properties, which make them the most promising nanoparticles in various fields. Currently, the majority of QDs available in the market are cadmium, indium, and lead-based materials but the toxicity and unstable nature of these QDs restricts their industrial and practical applications. To avoid using heavy metal ions, especially cadmium, the current research is focused on the fabrication of perovskite and vanadate QDs. Herein, we report the facile synthesis of a novel and cost-effective CsVO₃ QDs for the first time. The sizes of the CsVO₃ QDs produced were tuned from 2 to 10 nm by varying the reaction temperature from 140 to 190 °C. On increasing QD size, a continuous red shift was observed in absorption and emission spectra, signifying the presence of quantum confinement. In addition, along with CsVO₃ QDs, the CsVO₃ nanosheets self-assembled microflower-like particles were found as residue after the centrifugation; the X-ray diffraction indicated an orthorhombic structure. Under 365 nm excitation, these CsVO₃ microflower-like particles exhibited broad emission with CIE coordinates in the white emission region. The acquired results suggest that CsVO₃ QDs may represent a new class of cadmium-free materials for optoelectronic and biomedical applications.

Nanoparticles mediated tumor microenvironment modulation: current advances and applications

The tumor microenvironment (TME) plays a key role in cancer development and emergence of drug resistance. TME modulation has recently garnered attention as a potential approach for reprogramming the TME and resensitizing resistant neoplastic niches to existing cancer therapies such as immunotherapy or chemotherapy. Nano-based solutions have important advantages over traditional platform and can be specifically targeted and delivered to desired sites. This review explores novel nano-based approaches aimed at targeting and reprogramming aberrant TME components such as macrophages, fibroblasts, tumor vasculature, hypoxia and ROS pathways. We also discuss how nanoplatforms can be combined with existing anti-tumor regimens such as radiotherapy, immunotherapy, phototherapy or chemotherapy to enhance clinical outcomes in solid tumors.

All Transition Metal Selenide Composed High-Energy Solid-State Hybrid Supercapacitor

Transition metal selenides (TMSs) have enthused snowballing research and industrial attention due to their exclusive conductivity and redox activity features, holding them as great candidates for emerging electrochemical devices. However, the real-life utility of TMSs remains challenging owing to their convoluted synthesis process. Herein, a versatile in situ approach to design nanostructured TMSs for high-energy solid-state hybrid supercapacitors (HSCs) is demonstrated. Initially, the rose-nanopetal-like NiSe@Cu₂ Se (NiCuSe) positive electrode and FeSe nanoparticles negative electrode are directly anchored on Cu foam via in situ conversion reactions. The complementary potential windows of NiCuSe and FeSe electrodes in aqueous electrolytes associated with the excellent electrical conductivity results in superior electrochemical features. The solid-state HSCs cell manages to work in a high voltage range of 0-1.6 V, delivers a high specific energy density of 87.6 Wh kg^-1 at a specific power density of 914.3 W kg^-1 and excellent cycle lifetime (91.3% over 10 000 cycles). The innovative insights and electrode design for high conductivity holds great pledge in inspiring material synthesis strategies. This work offers a feasible route to develop high-energy battery-type electrodes for next-generation hybrid energy storage systems.

Cellular antioxidant potential and inhibition of foodborne pathogens by a sesquiterpene ilimaquinone in cold storaged ground chicken and under temperature-abuse condition

A sesquiterpene quinone, ilimaquinone, was accessed for its cellular antioxidant efficacy and possible antimicrobial mechanism of action against foodborne pathogens (Staphylococcus aureus and Escherichia coli) in vitro and in vivo. Ilimaquinone was found to be protective against H₂O₂-induced oxidative stress as validated by the reduction in the ROS levels, including increasing expression of SOD1 and SOD2 enzymes. Furthermore, ilimaquinone evoked MIC against S. aureus and E. coli within the range of 125-250 µg/mL. Ilimaquinone established its antimicrobial mode of action against both tested pathogens as evident by bacterial membrane depolarization, loss of nuclear genetic material, potassium ion, and release of extracellular ATP, as well as compromised membrane permeabilization and cellular component damage. Also, ilimaquinone showed no teratogenic effect against zebrafish, suggesting its nontoxic nature. Moreover, ilimaquinone significantly reduced the S. aureus count without affecting the sensory properties and color values of cold-storaged ground chicken meat even under temperature abuse condition.

Fluorine Engineered Self-Supported Ultrathin 2D Nickel Hydroxide Nanosheets as Highly Robust and Stable Bifunctional Electrocatalysts for Oxygen Evolution and Urea Oxidation Reactions

Developing highly efficient noble-metal-free electrocatalysts with a scalable and environmentally friendly synthesis approach remains a challenge in the field of electrocatalytic water splitting. To overcome this problem, self-supported fluorine-modified 2D ultrathin nickel hydroxide (F-Ni(OH)₂ ) nanosheets (NSs) for the oxygen evolution reaction (OER) and urea oxidation reaction (UOR) are prepared with a scalable and ascendant one-step synthesis route. The enhanced redox activity, electrical conductivity and a great number of exposed active sites of the heterogeneous catalysts improve charge migration for the electrocatalytic reactions. The density of states of the d orbitals of the Ni atoms significantly increases near the Fermi level, thereby indicating that the Ni atoms near the F-dopants promote electrical conduction in the Ni(OH)₂ monolayer. The F-Ni(OH)₂ electrocatalyst exhibits notable OER and UOR activity with onset potentials of 1.43 and 1.16 V versus RHE, respectively required to reach 10 mA cm^-2 , which are comparable to those of commercial noble-metal-based electrocatalysts. With RuCo-OH nanospheres, the settled F-Ni(OH)₂ ||RuCo-OH cell requires merely 1.55 and 1.37 V to reach 10 mA cm^-2 with superb durability for 24 h in overall water and urea electrolysis, respectively. Overall, high-quality, and efficient noble-metal-free electrocatalysts for overall water and urea electrolysis can be prepared with a simple, scalable, and reproducible preparation method.

Hybridized 1D-2D MnMoO4-MXene nanocomposites as high-performing electrochemical sensing platform for the sensitive detection of dihydroxybenzene isomers in wastewater samples

Hydroquinone (HQ) and catechol (CC) are the two major dihydroxybenzene isomers, are considered one of the toxic pollutants in wastewater, which often coexisted and impede each other during sample identification. For practical analysis and simultaneous detection of HQ and CC in wastewater, we fabricate a hybrid electrochemical sensor with electrospun one-dimensional (1D) MnMoO₄ nanofibers coupled with a few-layered exfoliated two-dimensional (2D) MXene. The facilitated abundant defective edges of 1D MnMoO₄ and 2D MXene nanoarchitecture accelerated the effect of synergistic signal amplification and exhibited high electrocatalytic activity towards the oxidation of hydroquinone and catechol. MnMoO₄-MXene-GCE showed oxidation potentials of 0.102 V and 0.203 V for hydroquinone and catechol, respectively. It revealed the distinguished and simultaneous detection range of 0.101 V with a strong anodic peak current. Noteworthily, the proposed 1D-2D hybridized MnMoO₄-MXene-GCE sensor exhibited a wide linear response from 5 nM to 65 nM for hydroquinone and catechol. Moreover, it showed a low detection limit of 0.26 nM and 0.30 nM for HQ and CC with high stability, respectively. The feasible 1D-2D MnMoO₄-MXene nanocomposite-based biosensor effectively detected hydroquinone and catechol in hazardous water pollutants using the differential pulse voltammetric technique with recovery values.

Nickel Cobaltite: A Positive Electrode Material for Hybrid Supercapacitors

The increased demand of energy due to the recent technological advances in diverse fields such as portable electronics and electric vehicles is often hindered by the poor capability of energy-storage systems. Although supercapacitors (SCs) exhibit higher power density than state-of-the art batteries, their insufficient energy density remains a major challenge. An emerging concept of hybrid supercapacitors (HSCs) with the combination of one capacitive and one battery electrode in a single cell holds a great promise to deliver high energy density without sacrificing power density and cycling stability. This Minireview elaborates the recent advances of use of nickel cobaltite (NiCo₂ O₄ ) as a potential positive electrode (battery-like) for HSCs. A brief introduction on the structural benefits and charge storage mechanisms of NiCo₂ O₄ was provided. It further shed a light on composites of NiCo₂ O₄ with different materials like carbon, polymers, metal oxides, and others, which altogether helps in increasing the electrochemical performance of HSCs. Finally, the key scientific challenges and perspectives on building high-performance HSCs for future-generation applications were reviewed.

Facile synthesis of petal-like VS2 anchored onto graphene nanosheets for the rapid sensing of toxic pesticide in polluted water

Fenitrothion (FT) is a toxic phosphorothioate insecticide that can easily contaminate aquatic environments, leading to a detrimental effect on the aquatic species and harmful endocrine disrupter effects on human health. Therefore, it is vital to develop a reliable methodology for the accurate and precise real-time sensing of carcinogenic FT in water samples at trace concentration to ensure environmental safety. We aim to fabricate the low-cost VS2-attached reduced graphene oxide (RGO) sheets via a simple hydrothermal approach. It was further applied for the rapid and accurate sensing of toxic FT. The VS2/RGO-composite delivers a more favorable microenvironment for the rapid electrocatalytic sensing performance towards toxic FT reduction than the VS2 and RGO modified electrodes. The electron transfer rate constant (ks) and the saturating absorption capacity (Γ) value of FT was evaluated to be 1.52 s-1 and 2.18 × 10-10 mol cm-2, respectively. The constructed sensor exhibits a wide linear relationship after amperometry between the cathodic current densities and the concentrations of FT in the range of 5-90 nM and high sensitivity (5.569 μA nM-1 cm-2); moreover, the detection limit was 0.07 nM (S/N = 3). The fabricated sensor has excellent anti-interference ability and reproducibility for the direct sensing of FT in river water, seawater, and lake water samples with acceptable recoveries. It is a promising sensing device for in-situ quantification of FT in agricultural products and ecological systems.

Au@Zr-based metal-organic framework composite as an immunosensing platform for determination of hepatitis B virus surface antigen

An ultrasensitive electrochemical immunosensor has been prepared using an immunofunctionalized zirconium (Zr)-based metal-organic framework (MOF) with gold (Au) decoration Au@UiO-66(NH₂) composite-coated glassy carbon electrode (GCE) for the determination of infectious hepatitis B surface antigen (HBsAg). We fabricated GCE with specific composite via immune-functionalization using anti-HBsAg with Au nanoparticles embedded in UiO-66(NH₂). The electrochemical sensing performance of the immunofunctionalized Au@UiO-66(NH₂)/GCE with HBsAg was characterized by cyclic voltammetry and differential pulse voltammetry. Under optimized conditions, there was a linear dynamic relationship in the buffer system between the electrical signal and HBsAg levels over the range 1.13 fg mL^-1-100 ng mL^-1 (R² = 0.999) with a detection limit of 1.13 fg mL^-1. The total analysis time was 15 min per sample. Further validations were performed with HBsAg-spiked human serum samples, and similar detection limits as in the buffer system were observed with reduced signal intensities at lower concentrations of HBsAg (1, 10, and 100 fg mL^-1) and minimal interference. The HBsAg electrochemical immunosensing assay had good selectivity and excellent reproducibility, thereby indicating its significant potential in the super-fast diagnosis of hepatitis B.

Partners in crime: The Lewis Y antigen and fucosyltransferase IV in Helicobacter pylori-induced gastric cancer

Helicobacter pylori (H. pylori) is a major causative agent of chronic gastritis, gastric ulcer and gastric carcinoma. H. pylori cytotoxin associated antigen A (CagA) plays a crucial role in the development of gastric cancer. Gastric cancer is associated with glycosylation alterations in glycoproteins and glycolipids on the cell surface. H. pylori cytotoxin associated antigen A (CagA) plays a significant role in the progression of gastric cancer through post-translation modification of fucosylation to develop gastric cancer. The involvement of a variety of sugar antigens in the progression and development of gastric cancer has been investigated, including type II blood group antigens. Lewis Y (LeY) is overexpressed on the tumor cell surface either as a glycoprotein or glycolipid. LeY is a difucosylated oligosaccharide, which is catalyzed by fucosyltransferases such as FUT4 (α1,3). FUT4/LeY overexpression may serve as potential correlative biomarkers for the prognosis of gastric cancer. We discuss the various aspects of H. pylori in relation to fucosyltransferases (FUT1-FUT9) and its fucosylated Lewis antigens (LeY, LeX, LeA, and LeB) and gastric cancer. In this review, we summarize the carcinogenic effect of H. pylori CagA in association with Le^Y and its synthesis enzyme FUT4 in the development of gastric cancer as well as discuss its importance in the prognosis and its inhibition by combination therapy of anti-Le^Y antibody and celecoxib through MAPK signaling pathway preventing gastric carcinogenesis.

Highly efficient and robust noble-metal free bifunctional water electrolysis catalyst achieved via complementary charge transfer

The operating principle of conventional water electrolysis using heterogenous catalysts has been primarily focused on the unidirectional charge transfer within the heterostructure. Herein, multidirectional charge transfer concept has been adopted within heterostructured catalysts to develop an efficient and robust bifunctional water electrolysis catalyst, which comprises perovskite oxides (La_0.5Sr_0.5CoO_3–δ, LSC) and potassium ion-bonded MoSe₂ (K-MoSe₂). The complementary charge transfer from LSC and K to MoSe₂ endows MoSe₂ with the electron-rich surface and increased electrical conductivity, which improves the hydrogen evolution reaction (HER) kinetics. Excellent oxygen evolution reaction (OER) kinetics of LSC/K-MoSe₂ is also achieved, surpassing that of the noble metal (IrO₂), attributed to the enhanced adsorption capability of surface-based oxygen intermediates of the heterostructure. Consequently, the water electrolysis efficiency of LSC/K-MoSe₂ exceeds the performance of the state-of-the-art Pt/C||IrO₂ couple. Furthermore, LSC/K-MoSe₂ exhibits remarkable chronopotentiometric stability over 2,500 h under a high current density of 100 mA cm⁻².

While water electrolysis offers a renewable means to obtain H₂, it is necessary to understand the roles adopted by catalytic components. Here, authors explore a heterostructured MoSe₂/perovskite oxide catalyst that shows multidirectional charge transfer to boost electrocatalytic water splitting.

Insights into cyclooxygenase-2 inhibition by isolated bioactive compounds 3-caffeoyl-4-dihydrocaffeoyl quinic acid and isorhamnetin 3-O-β-D-glucopyranoside from Salicornia herbacea

BACKGROUND

Cyclooxygenase-2 (COX-2) is an important enzyme with numerous biological functions. Overexpression of COX-2 has been associated with various inflammatory-related diseases and therefore, projected as an important pharmacological target.

PURPOSE

We aimed to investigate the inhibitory potential of isolated bioactive compounds, 3-caffeoyl-4-dihydrocaffeoyl quinic acid (CDQ) and isorhamnetin 3-O-β-d-glucopyranoside (IDG), from Salicornia herbacea against COX-2 using both computational and in vitro approaches.

METHODS

Computational analysis, including molecular docking, molecular dynamics (MD) simulations, and post-simulations analysis, were employed to estimate the binding affinity and stability of CDQ and IDG in the catalytic pocket of COX-2 against Celecoxib as positive control. These predictions were further evaluated using in vitro enzyme inhibition as well as gene expression mediation in macrophages cells.

RESULTS

Molecular docking analysis revealed substantial binding energy of CDQ (-6.1 kcal/mol) and IDG (-5.9 kcal/mol) with COX-2, which are lower than Celecoxib (-8.1 kcal/mol). MD simulations (100 ns) and post simulation analysis exhibited the substantial stability and binding affinity of docked CDQ and IDG compounds with COX-2. In vitro assays indicated significant COX-2 inhibition by CDQ (IC₅₀ = 76.91 ± 2.33 μM) and IDG (IC₅₀ = 126.06 ± 9.44 μM). This result supported the inhibitory potential of isolated bioactive compounds against COX-2. Also, a cellular level study revealed a downregulation of COX-2 expression in tumor necrosis factor-alpha stimulated RAW 264.7 macrophages treated with CDQ and IDG.

CONCLUSION

Computational and experimental analysis of CDQ and IDG from S. herbacea established their potential in the inhibition and mediation of COX-2. Hence, CDQ and IDG can be considered for therapeutic development against COX-2 linked disorders, such as inflammation and cancer. Furthermore, CDQ and IDG structures can be served as a lead compound for the development of advanced novel anti-inflammatory drugs.

Pd-Cu nanospheres supported on Mo2C for the electrochemical sensing of nitrites

The improper disposal in agricultural and industrial wastewater leads to high NO₂^- concentrations in the aquatic environment, which can cause cancer in humans and animals; thus, their quick and accurate detection is urgently needed to ensure public health and environmental safety. In this study, a reliable and selective electrochemical sensor consisting of Pd-Cu nanospheres (NSs) supported on molybdenum carbide was prepared via simple ultrasonication. Then, a glassy carbon electrode was realized using this composite (Pd-Cu-Mo₂C-modified GCE) to test its electrocatalytic sensing for NO₂^- in a 0.1 M phosphate-buffered solution (PBS) solution via cyclic voltammetry and amperometry; at a low oxidation potential, the anodic peak current of NO₂^- detected by this electrode was significantly higher than that of its unmodified and other modified electrodes. The sensor showed a broad linear response in the 5-165-nM NO₂^- concentration range, with a low detection limit (0.35 nM in 0.1 M PBS) and high sensitivity (3.308 μAnM^-1 cm^-2). Moreover, the fabricated electrode was successfully applied for detecting nitrites in sausages, river water, and milk, showing also good recovery.

Epitaxial Single-Crystal Growth of Transition Metal Dichalcogenide Monolayers via the Atomic Sawtooth Au Surface

Growth of 2D van der Waals layered single-crystal (SC) films is highly desired not only to manifest the intrinsic physical and chemical properties of materials, but also to enable the development of unprecedented devices for industrial applications. While wafer-scale SC hexagonal boron nitride film has been successfully grown, an ideal growth platform for diatomic transition metal dichalcogenide (TMdC) films has not been established to date. Here, the SC growth of TMdC monolayers on a centimeter scale via the atomic sawtooth gold surface as a universal growth template is reported. The atomic tooth-gullet surface is constructed by the one-step solidification of liquid gold, evidenced by transmission electron microscopy. The anisotropic adsorption energy of the TMdC cluster, confirmed by density-functional calculations, prevails at the periodic atomic-step edge to yield unidirectional epitaxial growth of triangular TMdC grains, eventually forming the SC film, regardless of the Miller indices. Growth using the atomic sawtooth gold surface as a universal growth template is demonstrated for several TMdC monolayer films, including WS₂ , WSe₂ , MoS₂ , the MoSe₂ /WSe₂ heterostructure, and W_{1- x} Mo_x S₂ alloys. This strategy provides a general avenue for the SC growth of diatomic van der Waals heterostructures on a wafer scale, to further facilitate the applications of TMdCs in post-silicon technology.

Bottom-up Approach for Designing Cobalt Tungstate Nanospheres through Sulfur Amendment for High-Performance Hybrid Supercapacitors

Nanofabrication of heteroatom-doped metal oxides into a well-defined architecture via a "bottom-up" approach is crucial to overcome the boundaries of the metal oxides for energy storage systems. In the present work, this issue was addressed by developing sulfur-doped bimetallic cobalt tungstate (CoWO₄ ) porous nanospheres for efficient hybrid supercapacitors via a single-step, ascendable bottom-up approach. The combined experimental and kinetics studies revealed enhanced electrical conductivity, porosity, and openness for ion migration after amendments of the CoWO₄ via sulfur doping. As a result, the sulfur-doped CoWO₄ nanospheres exhibited a specific capacity of 248.5 mA h g^-1 with outstanding rate capability and cycling stability. The assembled hybrid supercapacitor cell with sulfur-doped CoWO₄ nanospheres and activated carbon electrodes could be driven reversibly in a voltage of 1.6 V and exhibited a specific capacitance of 177.25 F g^-1 calculated at 1.33 A g^-1 with a specific energy of 63.41 Wh kg^-1 at 1000 W kg^-1 specific power. In addition, the hybrid supercapacitor delivered 94.85 % initial capacitance over 10000 charge-discharge cycles. The excellent supercapacitive performance of sulfur-doped CoWO₄ nanospheres may be credited to the sulfur doping and bottom-up fabrication of the electrode materials.

Reproductive toxic potential of phthalate compounds - State of art review

Phthalates are pervasive compounds, and due to the ubiquitous usage of phthalates, humans or even children are widely exposed to them. Since phthalates are not chemically bound to the plastic matrix, they can easily leach out to contaminate the peripheral environment. Various animal and human studies have raised vital health concern including developmental and reproductive toxicity of phthalate exposure. The present review is based upon the available literature on phthalates with respect to their reproductive toxic potential. Common reproductive effects such as declined fertility, reduced testis weight, variations in accessory sex organs and several female reproductive disorders appeared to be largely associated with the transitional phthalates. Among the higher molecular weight phthalates (≥ C7), di-isononyl phthalate (DINP) produces some minor effects on development of male reproductive tract and among low molecular weight phthalates (≤C3), di-methyl (DMP) and di-isobutyl (DIBP) phthalate produce some adverse effects on male reproductive system. Whereas transitional phthalates such as di-butyl phthalate, benzyl butyl phthalate, and di-(2-ethylhexyl) phthalate have shown adverse effects on female reproductive system. Owing to these, non-toxic alternatives to phthalates may be developed and use of phthalates could be rationalized as an important issue where human reproduction system is involved. Though, more epidemiological studies are needed to substantiate the reported findings on phthalates.

Engineered nanoparticles for imaging and drug delivery in colorectal cancer

Colorectal cancer (CRC) is one of the deadliest diseases worldwide due to a lack of early detection methods and appropriate drug delivery strategies. Conventional imaging techniques cannot accurately distinguish benign from malignant tissue, leading to frequent misdiagnosis or diagnosis at late stages of the disease. Novel screening tools with improved accuracy and diagnostic precision are thus required to reduce the mortality burden of this malignancy. Additionally, current therapeutic strategies, including radio- and chemotherapies carry adverse side effects and are limited by the development of drug resistance. Recent advances in nanotechnology have rendered it an attractive approach for designing novel clinical solutions for CRC. Nanoparticle-based formulations could assist early tumor detection and help to overcome the limitations of conventional therapies including poor aqueous solubility, nonspecific biodistribution and limited bioavailability. In this review, we shed light on various types of nanoparticles used for diagnosis and drug delivery in CRC. In addition, we will explore how these nanoparticles can improve diagnostic accuracy and promote selective drug targeting to tumor sites with increased efficiency and reduced cytotoxicity against healthy colon tissue.

Metasequoia glyptostroboides potentiates anticancer effect against cervical cancer via intrinsic apoptosis pathway

This study was undertaken to investigate the anticancer effects of organic extracts derived from the floral cones of Metasequoia glyptostroboides. Dried powder of M. glyptostroboides floral cones was subjected to methanol extraction, and the resulting extract was further partitioned by liquid–liquid extraction using the organic solvents n-hexane, dichloromethane (DME), chloroform, and ethyl acetate in addition to deionized water. HeLa cervical and COS-7 cells were used as a cancer cell model and normal cell control, respectively. The anticancer effect was evaluated by using the Cell Counting Kit-8 assay. The viability of COS-7 cells was found to be 12-fold higher than that of the HeLa cells under the administration of 50 µg/ml of the DME extract. Further, the sub-G1 population was determined by FACS analysis. The number of cells at the sub-G1 phase, which indicates apoptotic cells, was increased approximately fourfold upon treatment with the DME and CE extracts compared with that in the negative control. Furthermore, RT-qPCR and western blotting were used to quantitate the relative RNA and protein levels of the cell death pathway components, respectively. Our results suggest that the extracts of M. glyptostroboides floral cones, especially the DME extract, which possesses several anticancer components, as determined by GC–MS analysis, could a potential natural anticancer agent.

Sugiol, a diterpenoid: Therapeutic actions and molecular pathways involved

Understanding how the natural products structural diversity interacts with cellular metabolism and infectious disease targets remains a challenge. Inflammation is an important process in the human healing response in which the tissues respond to injuries induced by many agents, including pathogens. In recent years, several drugs derived from plant products have been developed, and current drug research is actively investigating the pharmacotherapeutic role of natural products in advanced multimodal inflammatory disease targeting. Sugiol, a diterpenoid, can act as an antimicrobial, antioxidant, anti-inflammatory, anti-carcinoma, antiviral, and cardiovascular agent. Until now, there have been no updates on the pharmacotherapeutic advancement of sugiol. Herein, we correlate the diverse molecular pathways in disease prevention involving sugiol. We also discuss the origins of its structural diversity and summarize new research directions toward exploring its novel effective future uses. Despite much evidence of its efficacy and safety, the sugiol has not yet been approved as a therapeutic agent due to its low bioavailability, and insolubility in an aqueous environment. The aim of this review is to renew and update noteworthy information on the pharmacotherapeutic characteristics of sugiol to approach different advanced strategies employed in the context of natural nurturing-based biomedicine.

Simple synthesis of a clew-like tungsten carbide nanocomposite decorated with gold nanoparticles for the ultrasensitive detection of tert-butylhydroquinone

The excessive use of food additives in manufactured food products negatively affects their quality and potentially impacts human health. In the present study, a composite consisting of gold nanoparticles decorated on tungsten carbide (AuNP-WC) was successfully fabricated using a facile and cost-effective ultrasonication technique. Compared to a bare glassy carbon electrode (GCE), AuNP-GCE, and WC-GCE, the AuNP-WC-GCE demonstrated excellent sensing performance for tert-butylhydroquinone (TBHQ) when used as an electrocatalyst in 0.05 M phosphate buffer solution (PBS), with a low working potential and a high peak current. In particular, the composite was able to detect the oxidation of TBHQ within a linear concentration range of 5 to 75 nM, with an extremely low detection limit of 0.20 nM. The practicability of the sensor was also assessed in the analysis of TBHQ in real samples of soybean oil, blended oil, and red wine, with satisfactory recovery rates obtained.

Why Does Dimethyl Carbonate Dissociate Li Salt Better Than Other Linear Carbonates? Critical Role of Polar Conformers

The marked difference in the ionic conductivities of linear carbonate (LC) electrolyte solutions despite their similar viscosities and permittivities is a long-standing puzzle. This study unraveled the critical impact of solvent conformational isomerism on salt dissociation in 0.1-3.0 M LiPF₆ dimethyl carbonate (DMC), ethyl methyl carbonate (EMC), and diethyl carbonate (DEC) solutions using Raman and dielectric relaxation spectroscopies. The extent of salt dissociation in the LC solutions, which decreased in the order DMC > EMC > DEC, is closely related to the fraction of polar cis-trans LC conformers, as this conformer participates in Li ion solvation more readily than the nonpolar cis-cis counterpart. Our first-principles calculations corroborated that the cis-trans conformer facilitates free ion formation more than the cis-cis conformer, and the extent of this effect decreased in the order DMC > EMC > DEC. This study provides an avenue for the design of highly conductive electrolytes by exploiting the conformational isomerism of solvent molecules.

Silicon as the Anode Material for Multivalent-Ion Batteries: A First-Principles Dynamics Study

Due to its huge capacity, Si is a promising anode material for practical applications in lithium-ion batteries. Here, using first-principles calculations, we study the applicability of the amorphous Si anode in multivalent-ion batteries, which are of great interest as candidates for post-lithium-ion batteries. Of the multivalent Mg²⁺, Ca²⁺, Zn²⁺, and Al³⁺ ions, only Mg²⁺ and Ca²⁺ are able to form Mg_2.3Si and Ca_2.5Si by alloying with Si, delivering very high capacities of 4390 and 4771 mA h g^-1, respectively. Mg_2.3Si has an 8% smaller capacity than Ca_2.5Si, but its volume expansion ratio and ion diffusivity are ∼200% smaller and 3 orders of magnitude higher than those of Ca_2.5Si, respectively. The capacity, volume expansion, and ion diffusion of Mg_2.3Si are excellently high, moderately small, and fairly fast, respectively, when compared to those of Li_3.7Si, Na_0.75Si, and K_1.1Si. The high performance of Mg_2.3Si can be understood in terms of the coordination numbers of Si and the atomic size of Mg. This work suggests that, as a carrier ion for the amorphous Si anode, Mg²⁺ is the most competitive among the multivalent ions and is at least as good as monovalent ions.

Improved conductivity of flower-like MnWO4 on defect engineered graphitic carbon nitride as an efficient electrocatalyst for ultrasensitive sensing of chloramphenicol

Environmental hazards caused by chloramphenicol has attained special attention. Fast, accurate and reliable detection of chloramphenicol in foodstuffs and water samples is of utmost importance. Herein, we developed a g-C₃N₄/MnWO₄ composite for the selective and sensitive detection of chloramphenicol. Successful fabrication of g-C₃N₄/MnWO₄ composite was verified by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), x-ray diffraction (XRD) and x-ray photo electron spectroscopy (XPS) techniques. Electrochemical characteristics were evaluated by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV). The g-C₃N₄/MnWO₄ modified glassy carbon electrode has shown the highest electrocatalytic activity towards chloramphenicol with a decreased reduction potential of -0.547 V and increased cathodic peak current. The developed sensor has shown excellent performance for the detection of chloramphenicol with a sensitivity of 0.9986 μA nM^-1 cm^-2 and LOD of 1.03 nM in a broad linear range of 4.0-71 nM. In addition, the fabricated sensor has achieved anti-interference ability, good stability, excellent repeatability and remarkable reproducibility for the detection of chloramphenicol. The fabricated sensor applied for the determination of chloramphenicol in milk, human blood serum and sewage samples, in which significant and satisfactory results were achieved.

True Meaning of Pseudocapacitors and Their Performance Metrics: Asymmetric versus Hybrid Supercapacitors

The development of pseudocapacitive materials for energy-oriented applications has stimulated considerable interest in recent years due to their high energy-storing capacity with high power outputs. Nevertheless, the utilization of nanosized active materials in batteries leads to fast redox kinetics due to the improved surface area and short diffusion pathways, which shifts their electrochemical signatures from battery-like to the pseudocapacitive-like behavior. As a result, it becomes challenging to distinguish "pseudocapacitive" and "battery" materials. Such misconceptions have further impacted on the final device configurations. This Review is an earnest effort to clarify the confusion between the battery and pseudocapacitive materials by providing their true meanings and correct performance metrics. A method to distinguish battery-type and pseudocapacitive materials using the electrochemical signatures and quantitative kinetics analysis is outlined. Taking solid-state supercapacitors (SSCs, only polymer gel electrolytes) as an example, the distinction between asymmetric and hybrid supercapacitors is discussed. The state-of-the-art progress in the engineering of active materials is summarized, which will guide for the development of real-pseudocapacitive energy storage systems.

A radially controlled ZnS interlayer on ultra-long ZnO-Gd2S3 core-shell nanorod arrays for promoting the visible photocatalytic degradation of antibiotics

Nanorod (NR) arrays offer commendable visible-light-driven photocatalytic performances. Herein, we describe the construction of a ternary ZnO-ZnS-Gd₂S₃ nanostructural array in which a sulfidation process is used to decorate a Gd₂S₃ shell layer with a ZnS interface over vapor-phase-grown vertically-aligned ZnO. With control over the shell-wall thickness, the shell layer of ∼25 nm wall thickness on the ultra-long ZnO NR arrays exhibited a higher catalytic efficiency close to 3.3, 2.0, 1.2, and 1.8 times those of the bare ZnO, the ZnO-ZnS, the Gd₂S₃-decorated (∼10 nm) and Gd₂S₃ shell-layered (∼40 nm) ZnO-ZnS core-shell structures, respectively. The core-shell geometry and the shell-wall thickness with maximized contact interface afforded increased light absorption in the visible region and effectively retarded the recombination rate of the photoinduced charge carriers by confining electrons and holes separately, thus providing advantages in terms of the degradation of the pharmaceutical residue tetracycline and the industrial pollutant 4-nitrophenol in wastewater.

One-Dimensional NiSe-Se Hollow Nanotubular Architecture as a Binder-Free Cathode with Enhanced Redox Reactions for High-Performance Hybrid Supercapacitors

Selenium-enriched nickel selenide (NiSe-Se) nanotubes supported on highly conductive nickel foam (NiSe-Se@Ni foam) were synthesized using chemical bath deposition with the aid of lithium chloride as a shape-directing agent. The uniformly grown NiSe-Se@Ni foam, with its large number of electroactive sites, facilitated rapid diffusion and charge transport. The NiSe-Se@Ni foam electrode exhibited a superior specific capacitance value of 2447.46 F g^-1 at a current density value of 1 A g^-1 in 1 M aqueous KOH electrolyte. Furthermore, a high-energy-density pouch-type hybrid supercapacitor (HSC) device was fabricated using the proposed NiSe-Se@Ni foam as the positive electrode, activated carbon on Ni foam as the negative electrode, and a filter paper separator soaked in 1 M KOH electrolyte solution. The HSC delivered a specific capacitance of 84.10 F g^-1 at a current density of 4 mA cm^-2 with an energy density of 29.90 W h kg^-1 at a power density of 594.46 W kg^-1 for an extended operating voltage window of 1.6 V. In addition, the HSC exhibited excellent cycling stability with a capacitance retention of 95.09% after 10,000 cycles, highlighting its excellent potential for use in the hands-on applications. The real-life practicality of the HSC was tested by using it to power a red light-emitting diode.