Determination of sulfonamides in meat with dummy-template molecularly imprinted polymer-based chemiluminescence sensor

Current trends of functional monomers and cross linkers used to produce molecularly imprinted polymers for food analysis

Molecularly imprinted polymers (MIPs) as artificial synthetic receptors are in high demand for food analysis due to their inherent molecular recognition abilities. It is common practice to employ functional monomers with basic or acidic groups that can interact with analyte molecules via hydrogen bonds, covalent bonds, and other interactions (π-π, dipole-ion, hydrophobic, and Van der Waals). Therefore, selecting the appropriate functional monomer and cross-linker is crucial for determining how precisely they interact with the template and developing the polymeric network's three-dimensional structure. This study summarizes the advancements made in MIP's functional monomers and cross-linkers for food analysis from 2018 to 2023. The subsequent computational design of MIP has been thoroughly explained. The discussion has concluded with a look at the difficulties and prospects for MIP in food analysis.

Molecularly imprinted thermosensitive probe based on fluorescent advanced glycation end products to detect α-dicarbonyl compounds and inhibit pyrraline formation

A thermal-sensitive molecularly imprinted optosensing probe based on fluorescent advanced glycation end products (AGEs) was prepared by one-pot hydrothermal synthesis. Carbon dots (CDs) derived from fluorescent AGEs were used as the luminous centers, while molecularly imprinted polymers (MIPs) were wrapped outside of the CDs to form specific target recognition sites to highly selectively adsorb the intermediate product of AGEs of 3-deoxyglucosone (3-DG). Thermosensitive N-isopropylacrylamide (NIPAM) was combined with acrylamide (AM) as co-functional monomers, and ethylene glycol dimethacrylate (EGDMA) was chosen as a cross-linker for targeting identification and detection of 3-DG. Under optimal conditions, the fluorescence of MIPs could be gradually quenched with the adsorption of 3-DG on the surface of MIPs in the linear range of 1-160 μg/L, and the detection limit was 0.31 μg/L. The spiked recoveries of MIPs ranged from 82.97 to 109.94% in two milk samples, and the relative standard deviations were all less than 1.8%. In addition, the inhibition rate for non-fluorescent AGEs of pyrraline (PRL) was 23% by adsorbing 3-DG in the simulated milk system of casein and D-glucose, indicating that temperature-responsive MIPs not only could detect the dicarbonyl compound 3-DG quickly and sensitively, but also had an excellent inhibitory effect on AGEs.

A Sensitive and Selective Colorimetric Method Based on the Acetylcholinesterase-like Activity of Zeolitic Imidazolate Framework-8 and Its Applications

In this study, a simple colorimetric method was established to detect copper ion (Cu²⁺), sulfathiazole (ST), and glucose based on the acetylcholinesterase (AChE)-like activity of zeolitic imidazolate framework-8 (ZIF-8). The AChE-like activity of ZIF-8 can hydrolyze acetylthiocholine chloride (ATCh) to thiocholine (TCh), which will further react with 5,5′-dithiobis (2-nitrobenzoic acid) (DTNB) to generate 2-nitro-5-thiobenzoic acid (TNB) that has a maximum absorption peak at 405 nm. The effects of different reaction conditions (buffer pH, the volume of ZIF-8, reaction temperature and time, and ATCh concentration) were investigated. Under the optimized conditions, the value of the Michaelis-Menten constant (K_m) is measured to be 0.83 mM, which shows a high affinity toward the substrate (ATCh). Meanwhile, the ZIF-8 has good storage stability, which can maintain more than 80.0% of its initial activity after 30 days of storage at room temperature, and the relative standard deviation (RSD) of batch-to-batch (n = 3) is 5.1%. The linear dependences are obtained based on the AChE-like activity of ZIF-8 for the detection of Cu²⁺, ST, and glucose in the ranges of 0.021–1.34 and 5.38–689.66 µM, 43.10–517.24 µM, and 0.0054–1.40 mM, respectively. The limit of detections (LODs) are calculated to be 20.00 nM, 9.25 µM, and 5.24 µM, respectively. Moreover, the sample spiked recoveries of Cu²⁺ in lake water, ST in milk, and glucose in strawberry samples were measured, and the results are in the range of 98.4–115.4% with the RSD (n = 3) lower than 3.3%. In addition, the method shows high selectivity in the real sample analysis.

Production of a Natural Dihydropteroate Synthase and Development of a Signal-Amplified Pseudo-Immunoassay for the Determination of Sulfonamides in Pork

In this study, a type of magnetic photoaffinity-labeled activity-based protein profiling probe for sulfonamide drugs was first synthesized for the purpose of capturing the natural dihydropteroate synthase of Escherichia coli by using simple incubation and magnetic separation. After characterization of its identity with LC-ESI-MS/MS, this enzyme was used as a recognition reagent to develop a direct competitive pseudo-ELISA for the determination of the residues of 40 sulfonamides in pork. Because of the use of streptavidin-horseradish peroxidase and biotinylated horseradish peroxidase as a signal-amplified system, the limits of detection for the 40 drugs were in the range of 0.001-0.016 ng/mL. Compared to the steps in a conventional assay formation, the operation steps were the same, but the sensitivities increased 32-88-fold. Furthermore, the assay performances were better than the previously reported immunoassays performances for sulfonamides. Therefore, this method could be used as a practical tool for multiscreening the trace levels of sulfonamides residues in food samples.

Chemiluminescence sensors based on molecularly imprinted polymers for the determination of organophosphorus in milk

As a food adapted to all kinds of people, milk has a high nutritional value. Because milk is a complex biological matrix, detecting illegal compounds is often difficult. As a common pesticide, organophosphorus (OP) residues caused by nonstandard use may be ignored, which is a threat to milk quality. In this study, using coumaphos as template molecule, the synthesized molecularly imprinted polymer (MIP) can specifically recognize 7 kinds of OP. Then, the MIP was used as an identification element to prepare a chemiluminescence sensor on a 96-well microplate for the determination of OP residues in milk samples. Due to the 4-(imidazol-1-yl)phenol-enhanced luminol-H₂O₂ system, the sensitivity of the system is very high; the detection limits of 7 OP including coumaphos, fenthion, chlorpyrifos, parathion, diazinon, fenchlorphos, and fenitrothion were 1 to 3 pg/mL, and the half maximal inhibitory concentrations were 1 to 20 ng/mL. The intraday recoveries of 7 OP were in the range of 86.1 to 86.5%, and the interday recoveries were in the range of 83.6 to 94.2%. Furthermore, the sensor can be reused up to 5 times. Therefore, the MIP-based chemiluminescence sensor can be used as a routine tool to detect OP residues in milk samples.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Development of a Dihydropteroate Synthase-Based Fluorescence Polarization Assay for Detection of Sulfonamides and Studying Its Recognition Mechanism

In this study, the dihydropteroate synthase of Staphylococcus aureus was obtained, and its recognition mechanisms for 31 sulfonamide drugs were studied. Results showed that their core structure matched well with the binding pocket of para-aminobenzoic acid, and all the sulfonamide side chains were out of the binding pocket. Hydrogen bonds and hydrophobic interactions were the main intermolecular forces, and the key amino acids were Gly171 and Lys203. The binding sites in sulfonamide molecules were mainly around the para-aminobenzenesulfonamide part. This enzyme was used to develop a fluorescence polarization assay for detection of these drugs in chicken muscles. The change trends of half of inhibition concentrations and cross-reactivities for the 31 drugs were identical with the receptor-ligand affinities. The limits of detection were in the range of 2.0-38.5 ng/g, and one assay could be finished within several minutes. Therefore, this method could be used for multiscreening of sulfonamide residues in meat samples.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

Imprinted Polymers as Synthetic Receptors in Sensors for Food Safety

Foodborne illnesses represent high costs worldwide in terms of medical care and productivity. To ensure safety along the food chain, technologies that help to monitor and improve food preservation have emerged in a multidisciplinary context. These technologies focus on the detection and/or removal of either biological (e.g., bacteria, virus, etc.) or chemical (e.g., drugs and pesticides) safety hazards. Imprinted polymers are synthetic receptors able of recognizing both chemical and biological contaminants. While numerous reviews have focused on the use of these robust materials in extraction and separation applications, little bibliography summarizes the research that has been performed on their coupling to sensing platforms for food safety. The aim of this work is therefore to fill this gap and highlight the multidisciplinary aspects involved in the application of imprinting technology in the whole value chain ranging from IP preparation to integrated sensor systems for the specific recognition and quantification of chemical and microbiological contaminants in food samples.

[Recent advances in applications of fragment/dummy molecularly imprinted polymers]

Molecularly imprinted polymers (MIPs) are designed to mimic the specific binding principle of enzymes to substrates or antigens to antibodies, while holding several advantages such as structure predictability, recognition specificity, easy preparation, low cost, high physical robustness, and thermal stability. Therefore, they have been widely applied in many fields including sample preparation (pretreatment), sensing analysis (chemo/biosensors), biomedicine, and environment/food analysis. To date, several strategies were developed for MIPs preparation, aiming to simplify the preparation process and/or improve the properties of the polymers, greatly broadening its usability. The exploration in various advanced imprinting strategies and their combinational use has become a research hotspot in MIPs preparation, among which the fragment imprinting strategy and the dummy template imprinting strategy are especially favored. Fragment imprinting, also called segment imprinting, uses a partial structure of the target molecule as a pseudo-template to prepare MIPs. This strategy is useful to target molecules that are not easy to obtain or that are too large to be used as templates, providing a feasible method for imprinting target analytes that are easy to inactivate or infect, as well as macromolecules that are difficult to imprint. In turn, dummy template imprinting uses molecules with structure, shape, and size similar to the target analytes as templates for imprinting. Because the target is not directly used as a template, this strategy can overcome problems of template leakage, as well as solve target molecule-related difficulties as they can be expensive, infectious, flammable, explosive, or chemically instable. This mini-review compiles information of several articles published in the last four years across ACS, Elsevier, RSC, and other databases, summarizing the most recent advances in the application of fragment/dummy template MIPs (FMIPs/DMIPs). Herein, the biomedical application of FMIPs is mainly addressed as a strategy for the detection of proteins and microorganisms, and the application of FMIPs in the field of food analysis is also explored. In recent years, the imprinting of mammalian cells has made some progress in the application of FMIPs. Mammalian cells, especially cancer cells, overexpress some proteins and sugars, which are good fragment templates. Consequently, the fragment imprinting strategy is widely used in cancer cell imaging, localization, and treatment. Moreover, due to the complicated structure and easy inactivation of some proteins, their MIPs are often prepared by fragment imprinting (also called epitope imprinting). As some microorganisms are infectious, imprinting microorganisms directly can pose a risk; therefore it is safer to also use the fragment imprinting strategy in such cases. The recent application of fragment imprinting strategy in other areas remains scarce. Nonetheless, three studies in the food analysis have explored this possibility. DMIPs are widely used in sample pretreatment and sensing analysis, and they are mainly used as SPE adsorbents for packed SPE, dispersive SPE (DSPE), magnetic SPE (MSPE), and matrix solid phase dispersion (MSPD) extraction. In addition, DMIPs are employed as molecularly imprinted membrane materials. As a result, by virtue of DMIPs, selective extraction and enrichment of target analytes from complicated samples can be achieved. MIP-based sensors can either recognize or transduce, meaning that they can specifically recognize and bind target analytes as well as generate output signals for detection. Because of the high selectivity of MIPs, the use of a dummy template imprinting strategy solves the problem of template leakage in the process of recognition and adsorption, further improving the detection accuracy and sensitivity of the sensor. These features expand the application range of MIP-based sensors. This review briefly overviews the construction and application of chemiluminescence and fluorescence sensors based on DMIPs. Lastly, the advantages and disadvantages, differences, and relationships among the two strategies are summarized. Despite of their potential, four main challenges still remain as major setbacks for the application of FMIPs and DMIPs: (i) the difficulty to select or prepare appropriate fragment templates and dummy templates; (ii) how to ensure that there is almost no difference in the recognition adsorption selectivity between the fragment/dummy template and the original template, so as to ensure optimal recognition specificity; (iii) the use of, environment-friendly reagents to reduce pollution during FMIPs/DMIPs preparation and use to conform with green chemistry requirements; (iv) how to strengthen the industrial and commercial applications of FMIPs and DMIPs. Therefore, significant efforts should be made to develop new imprinting strategies and techniques, as well as to adopt combinational imprinting approaches for FMIPs/DMIPs preparation to expedite the sustainable development and efficient application of FMIPs and DMIPs.

A coupled method of on-line solid phase extraction with the UHPLC‒MS/MS for detection of sulfonamides antibiotics residues in aquaculture

The use of a variety of antibiotics in fish farming raises serious concern about the development of antibiotic resistance. Sulfonamides antibiotics (SAs), which are widely used in aquaculture and generate large eco‒toxicological effects with significant mutagenicity and teratogenic consequences, are still difficult to determine in aquatic organisms. In this study, an automatic technology was developed by coupling on‒line solid phase extraction system (on‒line SPE) with ultra‒high‒performance liquid chromatography spectrometry‒mass spectrometry (UHPLC‒MS/MS). Particularly, using a single on‒line column in the process of sample pretreatment, e.g., HLB or C18, phospholipids that potentially caused the matrix effect cannot be removed form biological sample. We applied a mixed cation exchange column (Oasis® MCX) connected with a hydrophilic lipophilic balance column (Oasis® HLB) in series in on‒line SPE clean‒up to remove interferences and finally obtained a clear and stable eluant. The on‒line SPE working conditions and UHPLC‒MS/MS parameters were optimized for their sensitivity, accuracy, decision limit, and detection capability, which were further calibrated for fish, shrimp and crab. The results showed that the limits of detection and limits of quantification ranged from 1.46 to 15.5 ng/kg, and 4.90-51.6 ng/kg, respectively. Accuracy values covered 71.5%-102% at the three concentration levels (0.1, 0.5, 1.0 μg/kg) for all compounds and average repeatability (relative standard deviation, RSD%) ranged from 3.47% to 14.2%. This on‒line SPE coupled with UHPLC‒MS/MS method is a way forward for an automatic, powerful detection technology for determination of antibiotics from complex matrix.

New Enhanced Method for Determination of Trace Sulfamethodxazole Based on the Fluorescence Behaviors of Cyclodextrins in Water Solutions

The widespread occurrence of sulfonamides (SAs) in the environment water has rasied great concerns about their potential to antibiotics resistance. In this study, the fluorescence behaviors of sulfamethoxazole (SMZ) representing certain properties of the SAs mixed with three different kinds of cyclodextrins (CDs) in water solutions were investigated, respectively. The result reported that the shapes of the fluorescence peak and its position for the SMZ that were mixed with the CDs were almost the same as those of the standard SMZ, respectively. In addition, compared with the identical control sample the fluorescence of SMZ mixed with each of the CD was greatly enhanced. Therefore, a new simple, and sensitive spectrofluorimetric method for the determination of SMZ was established in water solutions. and the dynamic linear ranges varied from 0.01 to 0.7 mg/L with the detection limit of 7.1 ng/L. And the correlation coefficient was more than 99.9%. Significantly, this new method was successfully applied to direct determination of SMZ in pharmaceutical compounds. Moreover, the results showed that the SMZ could separately form the 1:1 supramolecular compound with each of the CD.

Ultrasensitive determination of sulfathiazole using a molecularly imprinted electrochemical sensor with CuS microflowers as an electron transfer probe and Au@COF for signal amplification

In this work, a molecularly imprinted sensor employing copper sulfide (CuS) as a novel signal probe was successfully developed for ultrasensitive and selective determination of sulfathiazole (STZ). The reduction signals of Cu²⁺ produced in the process of electron transfer of CuS containing large amounts of Cu²⁺ are easy to be captured, which provide high electrochemical signals. Moreover, gold nanoparticles@covalent organic framework with excellent conductivity was introduced on the electrode surface for signal amplification and facilitating electron transfer processes of CuS. Under optimized testing conditions, the proposed sensor offered a linear DPV response to STZ over a very wide concentration range (1.0 × 10^-4 to 1.0 × 10^-11 mol L^-1), with a limit of detection of 4.3 × 10^-12 mol L^-1. Fodder and mutton samples spiked with STZ were analyzed using this sensor, and the satisfactory recoveries ranging from 83.0% to 107.2% were obtained. In addition, the proposed sensor was used to determine the concentration of STZ in chicken liver and pork liver, with quantification results being near identical to those determined by high-performance liquid chromatography.

Molecularly imprinted microspheres based multiplexed fluorescence method for simultaneous detection of benzimidazoles and pyrethroids in meat samples

Two molecularly imprinted microspheres and two fluorescent tracers for benzimidazoles and pyrethroids were synthesized respectively. The two types of microspheres were coated in the wells of conventional microplate simultaneously. Then the sample extracts and the two traces were added for differential competition. The fluorescence intensities at two different emission wavelengths were excited and recorded for quantification of the two classes of drugs respectively. The optimized multiplexed fluorescence method could be used to determine 8 benzimidazoles and 10 pyrethroids in mutton and beef samples simultaneously. The limits of detection of the method for the 18 drugs were in the range of 5.2-17 ng/mL, and the recoveries from the standards fortified blank samples were in the range of 67.7%-109%. From the analysis of 60 real mutton and beef samples, this method could be used for multi-screening the residues of benzimidazoles and pyrethroids in meat samples.

Production of generic monoclonal antibody and development of chemiluminescence immunoassay for determination of 32 sulfonamides in chicken muscle

A hapten of sulfabenzamide was first synthesized to generate a monoclonal antibody that simultaneously recognized 32 sulfonamides. The computational simulation showed that the 3D conformation, molecular bend angle, molecular volume, electronic charge of core structure of these drugs all showed influences on the antibody binding. The antibody was combined with a heterologous enzyme-labeled hapten to develop a direct competitive chemiluminescence enzyme linked immunosorbent assay for determination of the 32 sulfonamides in chicken muscle sample. The CRs of the optimized method for these drugs were in the range of 7.3%-1778%, and the IC₅₀ values were in the range of 0.038-11.2 ng/g. The limits of detection for detection of these drugs in chicken were in the range of 0.03-26 ng/g. Their recoveries from the standards fortified blank chicken samples were in the range of 60.8%-97.1%. Therefore, this method could be used as a useful tool for routine screening sulfonamides residues in meat.