Polychlorinated biphenyls (PCBs) in water: method development and application to river samples from a populated tropical urban area

Alternatives to 137Cs for 210Pb dating validation in south America and in the Carribean region: Point and diffuse sources

As today the 137Cs fallout peak, in sediment cores, corresponds only to 25% of its initial concentration, alternatives to the use of 137Cs as a210Pb sediment dating validation tool are proposed. In highly industrialized bays, such as Guanabara Bay in the Rio de Janeiro metropolitan region, several chemical/compounds from the surrounding industry releases may be applied as validation tools. Chromium and copper profiles in a sediment core adequately fit the expected pattern due to the implementation of a chemical plant in 1958, reaching their maximum discharge in 1982 and subsequently decreasing due to the operation of a new wastewater treatment plant. A diffuse source such, as the PCB-based mixture Askarel, was also applied as an alternative validation tool, and the observed concentration profile reproduced the expected behavior, with increasing concentration after the Second World War and a decrease after the ban of this product in 1981. The observed Aroclor 1254 and 1260 mixture chlorination rates fit the most widely distributed PCB-based products in the country.

Analytical methods for determining environmental contaminants of concern in water and wastewater

Control and prevention of environmental pollution have emerged as paramount global concerns. Anthropogenic activities, such as industrial discharges, agricultural runoff, and improper waste disposal, introduce a wide range of contaminants into various ecosystems. These pollutants encompass organic and inorganic compounds, particulates, microorganisms, and disinfection by-products, posing severe threats to human health, ecosystems, and the environment. Effective monitoring methods are indispensable for assessing environmental quality, identifying pollution sources, and implementing remedial measures. This paper suggests that the development and utilization of highly advanced analytical tools are both essential for the analysis of contaminants in water samples, presenting a foundational hypothesis for the review. This paper comprehensively reviews the development and utilization of highly advanced analytical tools which is mandatory for the analysis of contaminants in water samples. Depending on the specific pollutants being studied, the choice of analytical methods widely varies. It also reveals insights into the diverse applications and effectiveness of these methods in assessing water quality and contaminant levels. By emphasizing the critical role of the reviewed monitoring methods, this review seeks to deepen the understanding of pollution challenges and inspire innovative monitoring solutions that contribute to a cleaner and more sustainable global environment.•Urgent global concerns: control and prevention of pollution from diverse sources.•Varied contaminants, diverse methods: comprehensive review of analytical tools.•Inspiring a sustainable future: innovative monitoring for a cleaner environment.

Organochlorines in the riverine ecosystem of Punjab province, Pakistan: contamination status, seasonal variation, source apportionment, and ecological risk assessment

The aim of the present study was to determine the occurrence, spatio-temporal variations, source apportioning, and ecological risk assessment of selected PCBs and OCPs in surface water and sediments collected riverine environment of Punjab province, Pakistan. The concentration of ΣOCPs (water: 64-455 ng/L; sediments: 117-616 ng/g) and ΣPCBs (water: 2-132 ng/L; sediments: 3.27-200 ng/g) was found comparatively higher than the levels reported from other parts of the world. The higher concentrations of DDTs and HCHs were detected in both studied matrices, whereas among PCBs, CB-28, 49 and CB-37, 82 were dominant in water and sediments, respectively. The isomeric ratios including α-HCH/γ-HCH, (DDE + DDD) / DDTs, and α /β-endosulfan reflected the recent use of lindane, technical DDT, and endosulfan in the study area. The WHO-TEQ values of DL-PCBs ranged from 3.6 × 10^-6 to 0.115 ng/L and 8.7 × 10^-6 to 0.157 ng/g in surface water and sediments in both seasons, respectively. The spatial variation analysis revealed that the sites in the industrial and agricultural zones were highly contaminated. The OCPs and PCBs fluxes to downstream areas were estimated to be 12.4 tons/year and 1.9 tons/year, respectively. The significant ecological risks were estimated to be posed by OCPs and PCBs, as their levels in 67% and 62% of surface water and sediment samples were exceeding the threshold limits, highlighting effects to ecological integrities.

Exposure sources of polychlorinated biphenyls (PCBs) and health risk assessment: a systematic review in Iran

This systematic review aims to identify the sources of exposure to polychlorinated biphenyls (PCBs), portioning, and human health risk assessment in Iran. The literature was searched in the international databases of Web of Science, PubMed, Scopus, Google Scholar, and the national databases of SID and MagIran up to November 14, 2020. Among all 153 articles, 21 eligible papers were identified. Among them, only one article was related to drinking water, the rest was related to food and soil, and no article was found on ambient air. The corrected portion of each exposure source was determined to be 90% for food, 9% for water, and 1% for air. The total hazard quotient (HQ) was determined to be within an unsafe range, and the total excess lifetime cancer risk (ELCR) was determined to be at a high risk of oral carcinogenesis. It is suggested that a comprehensive study be conducted in a specific period for all sources of exposure in all counties of Iran. Moreover, it is recommended that the policymakers set national standards for this pollutant in near future in some sources of exposure (e.g., drinking water) which have no standards in Iran.

Water toxicants: a comprehension on their health concerns, detection, and remediation

Water is an essential moiety for the human use since a long time. Availability of good-quality water is very essential, as it is used in almost all the industrial, agricultural, and household activities. However, several factors such as increased urbanization and industrialization, extensive use of chemicals, natural weathering of rocks, and human ignorance led to incorporation of enormous toxicants into the water. The water toxicants are broadly classified as inorganic, organic, and radiological toxicants. Inorganic toxicants include heavy metals (As, Cr, Cd, Hg, Ni, Pb) and metalloids, ammonia, nitrate, and fluoride. Uranium is included in radiological toxicants which also causes chemical toxicity. Organic pollutants include polycyclic aromatic hydrocarbons, polychlorinated biphenyls, phenolic compounds, phthalate esters, pesticides, pharmaceutical and personal care products, perchlorates, and flame retardants. These toxicants are harmful for the ecosystem as well as for the human beings causing different types of health complications like lung cancer, nasal cancer, gingivitis, severe vomiting and abdominal pain, hormonal imbalance, skeletal damage, neurotoxicity like Alzheimer and Parkinson disease, renal toxicity, nephrotoxicity, etc. The USEPA and WHO specified the permissible concentration of these pollutants in the drinking water. Determination techniques having high sensitivity, low cost, rapid onsite, and real-time detection of traces of water pollutants are discussed. This review also covers in depth about the remediation techniques, for the control of water toxicants, such as chelation of the heavy metals, intoxication of pollutants using various plants, adsorption of toxicants using different sorbent medias, and photocatalytic breakdown of persistent organic pollutants (POPs).

Risk Assessment in Monitoring of Water Analysis of a Brazilian River

This study aimed to introduce non-parametric tests and guard bands to assess the compliance of some river water properties with Brazilian environmental regulations. Due to the heterogeneity of the measurands pH, Biochemical Oxygen Demand (BOD), manganese molar concentration, and Escherichia coli, which could be wrongly treated as outliers, as well as the non-Gaussian data, robust methods were used to calculate the measurement uncertainty. Next, based on guard bands, the compliance assessment was evaluated using this previous uncertainty information. For these four measurands, partial overlaps between their uncertainties and the specification limit could generate doubts about compliance. The non-parametric approach for calculating the uncertainty connected to the guard bands concept classified pH and BOD as “conform”, with a risk to the consumer of up to 4.0% and 4.9%, respectively; in contrast, manganese molar concentration and Escherichia coli were “not conform”, with a risk to the consumer of up to 25% and 7.4%, respectively. The methodology proposed was satisfactory because it considered the natural heterogeneity of data with non-Gaussian behavior instead of wrongly excluding outliers. In an unprecedented way, two connected statistical approaches shed light on the measurement uncertainty in compliance assessment of water analysis.