Boric-acid-modified Fe3O4@PDA@UiO-66 for enrichment and detection of glucose by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Borate-modified magnetic graphene oxide in enrichment and purification of cis-diols compound from natural extract

Black tartary buckwheat, rich in rutin, has been traditionally used for treating cardiovascular diseases, yet its efficient separation remains challenging. Herein, magnetic graphene oxide (MGO) was functionalized with 3-aminophenylboronic acid (APBA) via EDC/NHS coupling, forming MGO@APBA for selective rutin enrichment. Magnetic solid-phase extraction (MSPE) coupled with high-performance liquid chromatography (HPLC-UV) was employed for rutin analysis. Adsorption performances suggest Langmuir isotherm and pseudo-second-order model as best fit (Qm = 80.18 mg g-1). High satisfactory recovery (98.9 %-101.9 %), low limit of detection (0.5 mg L-1), wide linearity range (20-200 mg L-1) and good coefficient of determination (R2 = 0.994) were found. MGO@APBA demonstrated excellent selectivity through significant statistical (p = 0.03<0.05), reusability (>80 % adsorption efficiency after four cycles). MGO@APBA showed excellent selectivity and reusability, making it a promising tool for rutin purification. This study provides a strategy for rutin separation and highlights the potential of borate-functionalized nanomaterials in natural product extraction.

Cobalt-Based Ferrite Modified Carbon Nanotubes Fibers for Flexible and Disposable Microelectrode Toward Electrochemical Glucose Sensing

Glucose detection is critical in clinical health and the food industry, particularly in the diagnosis of blood sugar levels. Carbon-based fiber materials have recently featured prominently as non-enzymatic electrochemical glucose detectors. Herein, cobalt-based ferrite (CoFe2O4) in the form of nanoparticles has been successfully fabricated over the carbon nanotubes (CNTs) fiber via a simple hydrothermal process. Fabricated microelectrode (CoFe2O4@CNTs) was investigated as an electrocatalyst toward the non-enzymatic electrochemical glucose sensors. The structure and morphology of the modified fiber were studied by scanning electron microscopy including energy-dispersive X-ray spectroscopy. The electrochemical capability of the microelectrode was analyzed by using different electrochemical techniques including cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy (EIS). The proposed sensors exhibited a superb sensitivity of 0.21 µAcm-2 mM-1, a good linear range from 1 to 9 mM, and a lower detection limit of 1.7 mM. Further investigation via EIS indicated the low charge transfer resistance as compared to the bare CNTs-based fiber. Outcomes revealed that the material can potentially prove promising for the disposable microelectrode toward electrochemical glucose sensing.

A bimetallic peroxidase-mimicking nanozyme with antifouling property for construction of sensor array to identify phosphoproteins and diagnose cancers

Protein phosphorylation is a significant post-translational modification that plays a decisive role in the occurrence and development of diseases. However, the rapid and accurate identification of phosphoproteins remains challenging. Herein, a high-throughput sensor array has been constructed based on a magnetic bimetallic nanozyme (Fe3O4@ZNP@UiO-66) for the identification and discrimination of phosphoproteins. Attributing to the formation of Fe-Zr bimetallic dual active centers, the as-prepared Fe3O4@ZNP@UiO-66 exhibits enhanced peroxidase-mimicking catalytic activity, which promotes the electron transfer from Zr center to Fe(II)/Fe(III). The catalytic activity of Fe3O4@ZNP@UiO-66 can be selectively inhibited by phosphoproteins due to the strong interaction between phosphate groups and Zr centers, as well as the ultra-robust antifouling capability of zwitterionic dopamine nanoparticle (ZNP). Considering the diverse binding affinities between various proteins with the nanozyme, the catalytic activity of Fe3O4@ZNP@UiO-66 can be changed to various degree, leading to the different absorption responses at 420 nm in the hydrogen peroxide (H2O2) - 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) system. By simply extracting different absorbance intensities at various time points, a sensor array based on reaction kinetics for the discrimination of phosphoproteins from other proteins is constructed through linear discriminant analysis (LDA). Besides, the quantitative determination of phosphoproteins and identification of protein mixtures have been realized. Further, based on the differential level of phosphoproteins in cells, the differentiation of cancer cells from normal cells can also be implemented by utilizing the proposed sensor array, showing great potential in disease diagnosis.

Photothermal/photodynamic synergistic antibacterial study of MOF nanoplatform with SnFe2O4 as the core

Drug-resistant bacterial infections cause significant harm to public life, health, and property. Biofilm is characterized by overexpression of glutathione (GSH), hypoxia, and slight acidity, which is one of the main factors for the formation of bacterial resistance. Traditional antibiotic therapy gradually loses its efficacy against multi-drug-resistant (MDR) bacteria. Therefore, synergistic therapy, which regulates the biofilm microenvironment, is a promising strategy. A multifunctional nanoplatform, SnFe2O4-PBA/Ce6@ZIF-8 (SBC@ZIF-8), in which tin ferrite (SnFe2O4, denoted as SFO) as the core, loaded with 3-aminobenzeneboronic acid (PBA) and dihydroporphyrin e6 (Ce6), and finally coated with zeolite imidazole salt skeleton 8 (ZIF-8). The platform has a synergistic photothermal therapy (PTT)/photodynamic therapy (PDT) effect, which can effectively remove overexpressed GSH by glutathione peroxidase-like activity, reduce the antioxidant capacity of biofilm, and enhance PDT. The platform had excellent photothermal performance (photothermal conversion efficiency was 55.7 %) and photothermal stability. The inhibition rate of two MDR bacteria was more than 96 %, and the biofilm clearance rate was more than 90 % (150 μg/mL). In the animal model of MDR S. aureus infected wound, after 100 μL SBC@ZIF-8+NIR (150 μg/mL) treatment, the wound area of mice was reduced by 95 % and nearly healed. The serum biochemical indexes and H&E staining results were within the normal range, indicating that the platform could promote wound healing and had good biosafety. In this study, we designed and synthesized multifunctional nanoplatforms with good anti-drug-resistant bacteria effect and elucidated the molecular mechanism of its anti-drug-resistant bacteria. It lays a foundation for clinical application in treating wound infection and promoting wound healing.

Boric acids decorated polymers with Au nanoparticle anchor assisted laser desorption/ionization for qualitive and quantitative analysis of hydroxytyrosol in red wines

Hydroxytyrosol possesses a variety of biological and pharmacological activities that are beneficial to human health. However, the methodologies for its detection always suffered from problems. In this work, the gold nanoparticle modified polymer decorated with boric acids (pMBA/VPBA@Au) was synthesized and used both as the adsorbent and matrix to enrich and ionize small molecule substances through surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). The pMBA/VPBA@Au displayed a low detection limit (8 × 10-6 M) and high selectivity (1:100) for the enrichment of hydroxytyrosol, and the linear correlation curve between the concentration of hydroxytyrosol and the intensity of MS had a good correlation (10-4-10-2 M, R2 = 0.997). Additionally, the pMBA/VPBA@Au was used to quantify hydroxytyrosol in red wines, and the contents were 0.053-0.094 μg/mL. In general, a simple and novel method for the detection of hydroxytyrosol by SALDI-MS using boric acid functionalized polymer was developed for the first time, showing a good practical application value.

Research progress on nanomaterial-based matrices for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis

Matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is a novel soft ionization bio-mass spectrometry technology emerging in the 1980s, which can realize rapid detection of non-volatile, highly polar, and thermally unstable macromolecules. However, the analysis of small molecular compounds has been a major problem for MALDI-TOF MS all the time. In the MALDI analysis process based on traditional matrices, large numbers of interference peaks in the low molecular weight area and "sweet spots" phenomenon are produced, so the detection method needs to be further optimized. The promotion of matrix means the improvement of MALDI performance. In recent years, many new nanomaterial-based matrices have been successfully applied to the analysis of small molecular compounds, which makes MALDI applicable to a wider range of detection and useful in more fields such as pharmacy and environmental science. In this paper, the newly developed MALDI matrix categories in recent years are reviewed initially. Meanwhile, the potential applications, advantages and disadvantages of various matrices are analyzed. Finally, the future development prospects of nanomaterial-based matrices are also prospected.

Two-dimensional boron nanosheets for selective enrichment and detection of cis-diol compounds by surface-assisted laser desorption/ionization time-of-flight mass spectrometry

Surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) is an effective method for detecting of low-mass molecules. In this study, two-dimensional boron nanosheets (2DBs) were fabricated through thermal oxidation etching and coupling liquid exfoliation technologies, and applied as a matrix and selective sorbent for detecting cis-diol compounds by SALDI-TOF MS. The outstanding nanostructure and boric acid active sites of 2DBs endow them with sensitivity for cis-diol compound detection, excellent selectivity, and low background interference for complex samples. The specific in-situ enrichment faculty of the 2DBs as a matrix was investigated by SALDI-TOF MS using glucose, arabinose, and lactose as model analytes. In the presence of 100 -fold more interfering substances, the 2DBs showed high selectivity against cis-diol compounds, and exhibited a better sensitivity and a reduced limit of detection through enrichment treatment than graphene oxide matrices. The linearity, limit of detection (LOD), reproducibility, and accuracy of the method were evaluated under optimized conditions. The results showed that the linear relationships of six saccharides remained in the range of 0.05-0.6 mM with a correlation coefficient r ≥0.98. The LODs of six saccharides were 1 nM (glucose, lactose, mannose, fructose) and 10 nM (galactose, arabinose). Sample-to-sample (n = 6) with relative standard deviations (RSDs) of 3.2% to 8.1% were observed. Recoveries (n = 5) of 87.9-104.6% were obtained at three spiked levels in the milk samples. The proposed strategy promoted the development of a matrix for use with SALDI-TOF MS detection, in which the UV absorption properties and enrichment capabilities of 2DBs were combined.

Non-enzymatic amperometric glucose sensing on CuO/mesoporous TiO2 modified glassy carbon electrode

The present study illustrates the fabrication of a glucose sensing electrode based upon binary composite of copper oxide and mesoporous titanium dioxide on glassy carbon (CuO/TiO2/GCE). The X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis evidently showed the phase pure monoclinic CuO nanoparticles and anatase TiO2. N2 adsorption-desorption analysis verified the mesoporosity in TiO2 with specific surface area greater than 105 m2 g-1. Electrochemical impedance spectroscopic analysis proved the remarkable decrease in the charge transfer resistance and facilitation of electron transfer process on the fabricated electrode. The optimum weight ratio of CuO to TiO2 was 1 : 1, and the optimum potential was 0.6 V vs. saturated calomel electrode. The chronoamperometric measurements displayed a detection limit of 1.9 μM, and sensitivities of 186.67 μA mM-1 cm-2 and 90.53 μA mM-1 cm-2 in two linear ranges of 0.05 to 5.2 mM and 5.2 to 20 mM, respectively. The amperometric analysis further showed good reproducibility, high specificity and outstanding stability of the modified electrode.

A mesoporous graphene @ zirconium-based metal–organic frameworks as a matrix and an adsorbent for steroid detection using surface-assisted laser desorption/ionization time-of-flight mass spectrometry

Endocrine-disrupting chemicals (EDCs) in environmental water samples, a rapid, sensitive, and high-throughput method should be developed. In this study, an in situ-synthesized composite material of three-dimensional mesoporous graphene (3D-MG) and zirconium-based metal-organic frameworks (MOFs), denoted as MG@UiO-66, was used as both the adsorbent and matrix in surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) for steroid detection. Both graphene-based materials and MOFs have proven to be ineffective in detecting steroids as a matrix; however, their composites can detect steroids with higher sensitivity and lower interference. After screening different types of MOFs, a composite of UiO-66 and 3D-MG was selected as the new matrix for steroid detection. The combination of 3D-MG and UiO-66 further enhanced the ability of the material to enrich steroids, and reduced the limit of detection (LOD) of steroids. The method was evaluated for linearity, LODs, limit of quantitation (LOQs), reproducibility, and precision under optimized conditions. The results showed that the linear relationships of three steroids are kept in the range of 0-300 nM/L with a correlation coefficient r ≥ 0.97. The LODs and LOQs of the steroids were in the range of 3-15 and 10-20 nM/L, respectively. Recoveries (n = 5) of 79.3-97.2% were obtained at three spiked levels in the blank water samples. This fast and efficient method of using SALDI-TOF MS can be extended to detect the steroids in EDCs in environmental water samples.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2019-2020

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2020. Also included are papers that describe methods appropriate to analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. The review is basically divided into three sections: (1) general aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, fragmentation, quantification and the use of arrays. (2) Applications to various structural types such as oligo- and polysaccharides, glycoproteins, glycolipids, glycosides and biopharmaceuticals, and (3) other areas such as medicine, industrial processes and glycan synthesis where MALDI is extensively used. Much of the material relating to applications is presented in tabular form. The reported work shows increasing use of incorporation of new techniques such as ion mobility and the enormous impact that MALDI imaging is having. MALDI, although invented nearly 40 years ago is still an ideal technique for carbohydrate analysis and advancements in the technique and range of applications show little sign of diminishing.

[Advances in enrichment and separation of cis-diol-containing compounds by porous organic frameworks]

The design and synthesis of boronate affinity materials that show high efficiency, high selectivity, and high enrichment performance have gained significant attention. The principle of boronate affinity relies on the reversible covalent reactions, including the formation of stable five-membered or six-membered cyclic esters with cis-diol-containing compounds in alkaline aqueous media and dissociation of cyclic esters in an acidic surrounding to release cis-diol-containing compounds. Recently, various boronate affinity materials have been synthesized and utilized for selective enrichment of these compounds. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have been widely used in chromatographic separation and sample pretreatment because of their adjustable pore size, high porosity, high specific surface area, tunable skeleton structure, and favorable chemical and thermal stability. To promote the enrichment selectivity of MOFs and COFs for cis-diol-containing compounds, boronic acid-functionalized MOFs and COFs with various structures and categories have been synthesized. This review summarizes more than 80 investigations into the categories, synthetic strategies, and applications of boronic acid-functionalized MOFs and COFs from the Science Citation Index. These synthesis methods include metal ligand-fragment co-assembly, post-synthetic modification, and bottom-up modification of boronic acid-functionalized porous materials. Although two modification strategies (post-synthetic and metal ligand-fragment co-assembly) have been introduced for the preparation of boronic acid-functionalized MOFs, the latter is more commonly adopted as it improves the enrichment selectivity and enrichment efficiency of MOFs. The common limitations of MOFs such as aggregation and aperture issues were also resolved. Boron affinity MOFs possessing favorable properties according to the characteristics of cis-diol-containing compounds, have also been synthesized. Furthermore, to facilitate enrichment and separation, many boronic acid-functionalized magnetic material MOFs have been developed for the enrichment and analysis of cis-diol-containing compounds. Additionally, the luminescent properties of Ln-MOFs have been used in combination with boronic acid affinity for the enrichment, separation, and subsequent detection of cis-diol-containing compounds. Post-synthetic modification and the bottom-up strategy are the primary methods for the preparation of boronic acid-functionalized COFs. Boronic acid-functionalized COFs are less investigated than boronic acid-functionalized MOFs, likely due to the greater complexity of COF synthesis. This work aims to summarize the research advances, synthesis ideas, and synthesis methods related to boric acid-functionalized porous organic frameworks, which will provide theoretical guidance and technical support for its applications while accelerating the commercialization of such organic frameworks.

Electrospinning One-dimensional Surface-phosphorized CuCo/C nanofibers for Enzyme-free Glucose Sensing

Developing novel electrocatalysts is of great importance for the practical application of non-enzymatic glucose sensors. One-dimensional (1D) carbon fiber-supported copper-cobalt bimetallic electrocatalysts (CuCo-P350) are successfully prepared via electrospinning technology and...

Inorganic Matrices Assisted Laser Desorption/Ionization Mass Spectrometry for Metabolic Analysis in Bio-fluids

Metabolic analysis in bio-fluids interprets the end products in the bio-process, emerging as an irreplaceable disease diagnosis and monitoring platform. Laser desorption/ionization mass spectrometry (LDI MS) based metabolic analysis exhibits great potential for clinical applications in terms of high throughput, rapid signal readout, and minimal sample preparation. There are two essential elements to construct the LDI MS-based metabolic analysis: 1) well-designed nanomaterials as matrices; 2) machine learning algorithms for data analysis. This review highlights the development of various inorganic matrices to comprehend the advantages of LDI MS in metabolite detection and the recent diagnostic applications based on target metabolite detection and untargeted metabolic fingerprints in biological fluids.