An efficient aggregation-induced electrochemiluminescent immunosensor by using TiO2 nanoparticles as coreaction accelerator and energy donor for aflatoxin B1 detection

Construction of self-enhanced luminescence probes based on Ti3C2 reducibility for ultrasensitive PNK analysis

Au nano-clusters (Au NCs) were promising electrochemiluminescence (ECL) nano-materials. However, the small size of Au NCs presented a challenge in terms of their immobilization during the construction of an ECL biosensing platform. This limitation significantly hindered the wider application of Au NCs in the ECL field. In this work, we successfully used the reducibility of Ti3C2 to fabricate in situ a self-enhanced nano-probe Ti3C2-TiO2-Au NCs. The strategy of in situ generation not only improved the immobilization of Au NCs on the probe but also eliminated the requirement of adding reducing agents during preparation. In addition, in situ generated TiO2 could serve as a co-reaction accelerator, shortening the electron transfer distance between S2O82- and Au NCs, thereby improving the utilization of intermediates and enhancing the ECL response of Au NCs. The constructed ECL sensing platform could achieve sensitive detection of polynucleotide kinase (PNK). At the same time, the 5'-end phosphate group of DNA phosphorylation could chelate with a large amount of Ti on the surface of Ti3C2, thereby achieving the goal of specific detection of PNK. The sensor based on self-enhanced ECL probes had a broad dynamic range spanning for PNK detection from 10.0 to 1.0 × 107 μU mL-1, with a limit of detection of 1.6 μU mL-1. Moreover, the ECL sensor showed satisfactory detection performance in HeLa cell lysate and serum. This study not only provided insights for addressing the issue of ECL luminescence efficiency in Au NCs but also presented novel concepts for ECL self-enhancement strategies.

An ultrasensitive solid-state electrochemiluminescence sensor based on Ni-MOF@Ru(bpy)32+ and Au NPs@TiO2 for determination of permethrin

The novel TiO2 and Ni-MOF materials were synthesized and utilized for the detection of permethrin (PET). A highly sensitive solid-state electrochemiluminescence (ECL) sensor was developed based on Ni-MOF@Ru(bpy)32+ and Au NPs@TiO2. In this sensing platform, Ru(bpy)32+-Tripropyl Amine (TPrA) was used as a luminescent signal, Ni-MOF acted as a carrier to carry more luminescent reagents Ru(bpy)32+. Au NPs acted as promoters facilitated electron transport and TiO2 could further enhance the luminescence intensity of the system by synergistical interaction with Au NPs. The possible mechanisms of signal amplification were investigated. The ECL intensity decreased significantly with increasing PET concentration, enabling the determination of PET amount through the observation of the change in ECL signal intensity (ΔI). Under optimal experimental conditions, the linear range of PET concentration from 1.0 × 10-11 mol L-1 to 1.0 × 10-6 mol L-1, with a detection limit of 3.3 × 10-12 mol L-1 (3S/N). This method was successfully applied to determine PET in various vegetable samples.

Polydopamine@ZIFs with enhanced electrochemiluminescence quenching performance for mycotoxin detection

Quench-type electrochemiluminescence (ECL) immunosensors are appealing for detecting small molecule contaminants in signal-on mode, for which efficient ECL quenchers are highly desirable. Here, the classical quencher of polydopamine (PDA) was transformed into a unique structure by introducing zeolite imidazole frameworks (ZIFs). Besides the inherent energy transfer quenching effect on ECL, the resulting PDA@ZIFs exhibits a high scavenging property against electrogenerated coreactant-radicals and inhibits the formation of excited luminophore. A quench-type ECL immunosensor for ochratoxin A (OTA) was developed using the PDA@ZIFs as a quencher and the g-C3N4 as a luminophore. The immunosensor showed a good response towards the OTA with a linear range of 10.0 fg/mL-1.0 ng/mL and a detection limit of 4.8 fg/mL. Acceptable recoveries of 85.7 to 109.2 % were achieved for the detection of OTA in spiked foods. This work offers valuable insight for improving the performance of quench-typed ECL biosensors.

MXene-based aptasensor for the detection of aflatoxin in food and agricultural products

The detection of toxins that contaminate food needs highly sensitive and selective techniques to prevent substantial monitory loss. In this regard, various nanostructured material-enabled biosensors, have recently been developed to improve the detection of food toxins among them aflatoxin is the prevalent one. The biosensor-based detection of aflatoxin is quick, cheaper, and needs less skilled personnel, therefore overcoming the shortcomings of conventional techniques such as LC/MS-MS, HPLC, and ELISA assays. 2D MXenes manifest as an efficient material for biosensing due to their desirable biocompatibility, magnificent mechanical strength, easiness of surface functionalization, and tuneable optical and electronic features. Contrary to this, aptamers as biorecognition elements (BREs) possess high selectivity, sensitivity, and ease of synthesis when compared to conventional BREs. In this review, we explored the most cutting-edge aptamer-based MXene-enabled biosensing technologies for the detection of the most poisonous mycotoxins (i.e., Aflatoxins) in food and environmental matrices. The discussion begins with the synthesis processes and surface functionalization/modification of MXenes. Computational approaches for designing aptasensors and advanced data analysis based on artificial intelligence and machine learning with special emphasis over Internet-of-Thing integrated biosensing devices has been presented. Besides, the advantages of aptasensors over conventional methods along with their limitations have been briefed. Their benefits, drawbacks, and future potential are discussed concerning their analytical performance, utility, and on-site adaptability. Additionally, next-generation MXene-enabled biosensing technologies that provide end users with simple handling and improved sensitivity and selectivity have been emphasized. Owing to massive applicability, economic/commercial potential of MXene in current and future perspective have been highlighted. Finally, the existing difficulties are scrutinized and a roadmap for developing sophisticated biosensing technologies to detect toxins in various samples in the future is projected.