In Vivo Bone Formation Within Engineered Hydroxyapatite Scaffolds in a Sheep Model

A numerical study on mechanical and permeability properties of novel design additive manufactured Titanium based metal matrix composite bone scaffold for bone tissue engineering

A novel design was developed for extrusion based additive manufacturing (robocasting) of bone scaffolds and a numerical study was carried out to find the optimal design to develop a bone scaffold for critical bone defect treatments. Initially, Representative Volume Analysis (RVE) analysis was carried out to predict the Young's modulus (E) of Titanium + Calcium Silicate and Titanium + Hydroxyapatite composites. The RVE analysis outputs were used to find out the E value of various bone scaffold designs and material compositions. The novel stepped design could be used to tailor the mechanical and biological properties of the scaffold by altering the contact support area between strands and changing the pore size, shape and orientation to control the permeability and nutrient transportation. The test revealed that some of the designed scaffolds are suitable for developing scaffolds for cortical bone defects as the E value lies between 10 and 30 GPa. The CFD analysis indicated that some designs do not possess the permeability required for a scaffold to aid nutrient transportation which is ideally between 1.5 × 10-9 and 5 × 10-8 m2. A sample model was printed and sintered in an argon atmosphere using a microwave furnace to check the feasibility of the process.

Bone Tissue Engineering With Chitosan, Carbon Nanotubes, and Hydroxyapatite Biomaterials Enriched With Mesenchymal Stem Cells: A Radiographic and Histological Evaluation in a Sheep Model Undergoing Ostectomy (Bone Tissue Engineering in a Sheep Model)

Comminuted fractures associated with tissue loss can adversely affect bone regeneration. Biomaterials enriched with mesenchymal stem cells (MSCs) employed for supporting osteosynthesis and potentiating osteoconduction are necessary to fill these bone defects. Natural compound biomaterials, similar to bone tissue, have been extensively tested in animal models for clinical use. Bone tissue engineering studies have used critical-size defects in ovine tibia monitored by imaging and histological examinations to evaluate the regenerative process. This study aimed to monitor the regenerative process in ovine tibial defects with or without chitosan, carbon nanotubes, or hydroxyapatite biomaterials, enriched or not enriched with MSCs. A 3-cm ostectomy was performed in 18 female Suffolk sheep. A 10-hole 4.5 mm narrow locking compression plate was used for osteosynthesis. The animals were randomly divided into three groups (n = 6): control (CON); defects filled with chitosan, carbon nanotubes, and hydroxyapatite biomaterial (BIO); and the same biomaterial enriched with bone marrow MSCs (BIO + CELL). The animals were evaluated monthly using radiographic examinations until 90 postoperative days, when they were euthanized. The limbs were subjected to micro-computed tomography (micro-CT), and bone specimens were subjected to histological evaluations. The radiographic examinations revealed construction stability without plate deviation, fracture, or bone lysis. Micro-CT evaluation demonstrated a difference in bone microarchitecture between the CON and biomaterial treatment groups (BIO and BIO + CELL). In the histological evaluations, the CON group did not demonstrate bone formation, and in the treatment groups (BIO and BIO + CELL), biocompatibility with sheep tissue was noted, and bone formation with trabeculae interspersed with remnants of the biomaterial was observed, with no differences between the groups. In conclusion, biomaterials present osteoconduction with beneficial characteristics for filling bone-lost fractures, and MSCs did not interfere with bone formation.

Safety of a Porous Hydroxyapatite Bone Substitute in Orthopedics and Traumatology: A Multi-Centric Clinical Study

The development of biomaterials in recent years has made it possible to broaden their use in the surgical field. Although iliac crest bone graft harvesting currently remains the gold standard as an autograft, the properties of hydroxyapatite bone substitutes appear to be beneficial. The first fundamental step to consider is the safety of using these devices. The purpose of this retrospective cohort study is to consider all the adverse events observed in our population and assess their relationships with the bone substitute device. The population analyzed consisted of patients undergoing trauma osteosynthesis with at least one implanted porous hydroxyapatite device. We considered a court of 114 patients treated at "Azienda Ospedaliera Universitaria di Ferrara-U.O. di Ortopedia e Traumatologia" in the period from January 2015 to December 2022. Upon analyzing our population, no adverse events related to the device emerged. Taking into consideration different study groups from other National Hospital Centers, no critical issues were detected except for three cases of extrusion of the biomaterial. It is necessary to clarify that bone substitutes cannot replace compliance with the correct principles linked to the biomechanics of osteosynthesis. This report outlines a safety profile for the use of these devices as bone substitutes in trauma orthopedic surgery.

Mechanics Predicts Effective Critical-Size Bone Regeneration Using 3D-Printed Bioceramic Scaffolds

BACKGROUND

3D-printed bioceramic scaffolds have gained popularity due to their controlled microarchitecture and their proven biocompatibility. However, their high brittleness makes their surgical implementation complex for weight-bearing bone treatments. Thus, they would require difficult-to-instrument rigid internal fixations that limit a rigorous evaluation of the regeneration progress through the analysis of mechanic-structural parameters.

METHODS

We investigated the compatibility of flexible fixations with fragile ceramic implants, and if mechanical monitoring techniques are applicable to bone tissue engineering applications. Tissue engineering experiments were performed on 8 ovine metatarsi. A 15 mm bone segment was directly replaced with a hydroxyapatite scaffold and stabilized by an instrumented Ilizarov-type external fixator. Several in vivo monitoring techniques were employed to assess the mechanical and structural progress of the tissue.

RESULTS

The applied surgical protocol succeeded in combining external fixators and subject-specific bioceramic scaffolds without causing fatal fractures of the implant due to stress concentrator. The bearing capacity of the treated limb was initially altered, quantifying a 28-56% reduction of the ground reaction force, which gradually normalized during the consolidation phase. A faster recovery was reported in the bearing capacity, stiffening and bone mineral density of the callus. It acquired a predominant mechanical role over the fixator in the distribution of internal forces after one post-surgical month.

CONCLUSION

The bioceramic scaffold significantly accelerated in vivo the bone formation compared to other traditional alternatives in the literature (e.g., distraction osteogenesis). In addition, the implemented assessment techniques allowed an accurate quantitative evaluation of the bone regeneration through mechanical and imaging parameters.

Virtual Design of 3D-Printed Bone Tissue Engineered Scaffold Shape Using Mechanobiological Modeling: Relationship of Scaffold Pore Architecture to Bone Tissue Formation

Large bone defects are clinically challenging, with up to 15% of these requiring surgical intervention due to non-union. Bone grafts (autographs or allografts) can be used but they have many limitations, meaning that polymer-based bone tissue engineered scaffolds (tissue engineering) are a more promising solution. Clinical translation of scaffolds is still limited but this could be improved by exploring the whole design space using virtual tools such as mechanobiological modeling. In tissue engineering, a significant research effort has been expended on materials and manufacturing but relatively little has been focused on shape. Most scaffolds use regular pore architecture throughout, leaving custom or irregular pore architecture designs unexplored. The aim of this paper is to introduce a virtual design environment for scaffold development and to illustrate its potential by exploring the relationship of pore architecture to bone tissue formation. A virtual design framework has been created utilizing a mechanical stress finite element (FE) model coupled with a cell behavior agent-based model to investigate the mechanobiological relationships of scaffold shape and bone tissue formation. A case study showed that modifying pore architecture from regular to irregular enabled between 17 and 33% more bone formation within the 4-16-week time periods analyzed. This work shows that shape, specifically pore architecture, is as important as other design parameters such as material and manufacturing for improving the function of bone tissue scaffold implants. It is recommended that future research be conducted to both optimize irregular pore architectures and to explore the potential extension of the concept of shape modification beyond mechanical stress to look at other factors present in the body.

PCL strut-like scaffolds appear superior to gyroid in terms of bone regeneration within a long bone large defect: An in silico study

The treatment of large bone defects represents a major clinical challenge. 3D printed scaffolds appear as a promising strategy to support bone defect regeneration. The 3D design of such scaffolds impacts the healing path and thus defect regeneration potential. Among others, scaffold architecture has been shown to influence the healing outcome. Gyroid architecture, characterized by a zero mean surface curvature, has been discussed as a promising scaffold design for bone regeneration. However, whether gyroid scaffolds are favourable for bone regeneration in large bone defects over traditional strut-like architecture scaffolds remains unknown. Therefore, the aim of this study was to investigate whether gyroid scaffolds present advantages over more traditional strut-like scaffolds in terms of their bone regeneration potential. Validated bone defect regeneration principles were applied in an in silico modeling approach that allows to predict bone formation in defect regeneration. Towards this aim, the mechano-biological bone regeneration principles were adapted to allow simulating bone regeneration within both gyroid and strut-like scaffolds. We found that the large surface curvatures of the gyroid scaffold led to a slower tissue formation dynamic and conclusively reduced bone regeneration. The initial claim, that an overall reduced zero mean surface curvature would enhance bone formation, could not be confirmed. The here presented approach illustrates the potential of in silico tools to evaluate in pre-clinical studies scaffold designs and eventually lead to optimized architectures of 3D printed implants for bone regeneration.

A systematic review of bone marrow stromal cells and periosteum-derived cells for bone regeneration

Bone marrow stromal cells (BMSCs) and periosteum-derived cells (PDCs) represent promising skeletal stem cell sources to treat critical-size bone defects. However, the large number of preclinical tests with a variety of in vivo data complicates the selection of cells for further clinical translation. This systematic review aims to analyze the in vivo bone-forming efficacy of BMSCs- and PDCs-based approaches in all published preclinical experiments until November 2020. For this purpose, four databases (PubMed, Embase, Cochrane Central Register of Controlled Trial, and Web of Science) were searched for eligible literature, which yielded a total of 94 full-text articles for systematic review. This review generated an evidence-based list of BMSC- or PDC-based approaches, which have been evaluated for bone formation in different animal models. Among them, 74 studies were included for pairwise and network meta-analysis. The results revealed that both PDC and BMSC had beneficial bone-forming efficacy compared to bare scaffold. In addition, BMSC- and PDC-based approaches had no significant difference regarding in vivo bone-forming efficacy. However, BMSC-based approach had a higher probability to be ranked better than PDC-based approach. Furthermore, the review discusses (i) the possible risk of bias of the in vivo evaluation of cell-based approaches, (ii) the difficulty in replication of such experiments due to frequent poor reporting of the methods and results, and (iii) the clinical relevance of the currently utilized BMSC- and PDC-based approaches. Systematic review registration: The study was prospectively registered in PROSPERO, Registration No. CRD42021270922.

An in silico model predicts the impact of scaffold design in large bone defect regeneration

Large bone defects represent a clinical challenge for which the implantation of scaffolds appears as a promising strategy. However, their use in clinical routine is limited, in part due to a lack of understanding of how scaffolds should be designed to support regeneration. Here, we use the power of computer modeling to investigate mechano-biological principles behind scaffold-guided bone regeneration and the influence of scaffold design on the regeneration process. Computer model predictions are compared to experimental data of large bone defect regeneration in sheep. We identified two main key players in scaffold-guided regeneration: (1) the scaffold surface guidance of cellular migration and tissue formation processes and (2) the stimulation of progenitor cell activity by the scaffold material composition. In addition, lower scaffold surface-area-to-volume ratio was found to be beneficial for bone regeneration due to enhanced cellular migration. To a lesser extent, a reduced scaffold Young's modulus favored bone formation. STATEMENT OF SIGNIFICANCE: 3D-printed scaffolds offer promising treatment strategies for large bone defects but their broader clinical use requires a more thorough understanding of their interaction with the bone regeneration process. The predictions of our in silico model compared to two experimental set-ups highlighted the importance of (1) the scaffold surface guidance of cellular migration and tissue formation processes and (2) the scaffold material stimulation of progenitor cell activity. In addition, the model was used to investigate the effect on the bone regeneration process of (1) the scaffold surface-area-to-volume ratio, with lower ratios favoring more bone growth, and (2) the scaffold material properties, with stiffer scaffold materials yielding a lower bone growth.

In vitro and in vivo assessment of a 3D printable gelatin methacrylate hydrogel for bone regeneration applications

Bone tissue engineering (BTE) has made significant progress in developing and assessing different types of bio-substitutes. However, scaffolds production through standardized methods, as required for good manufacturing process (GMP), and post-transplant in vivo monitoring still limit their translation into the clinic. 3D printed 5% GelMA scaffolds have been prepared through an optimized and reproducible process in this work. Mesenchymal stem cells (MSC) were encapsulated in the 3D printable GelMA ink, and their biological properties were assessed in vitro to evaluate their potential for cell delivery application. Moreover, in vivo implantation of the pristine 3D printed GelMA has been performed in a rat condyle defect model. Whereas optimal tissue integration was observed via histology, no signs of fibrotic encapsulation or inhibited bone formation were attained. A multimodal imaging workflow based on computed tomography (CT) and magnetic resonance imaging (MRI) allowed the simultaneous monitoring of both new bone formation and scaffold degradation. These outcomes point out the direction to undertake in developing 3D printed-based hydrogels for BTE that can allow a faster transition into clinical use.

Hydroxypropylmethyl cellulose (HPMC) crosslinked keratin/hydroxyapatite (HA) scaffold fabrication, characterization and in vitro biocompatibility assessment as a bone graft for alveolar bone regeneration

Wool derived keratin has garnered significant advancements in the field of biomaterials for hard tissue regeneration. The main limitation of keratin-based biomaterials for bone tissue engineering is their fragile nature. This paper proposes the development of a novel hydroxypropyl methylcellulose (HPMC) crosslinked keratin scaffold, containing hydroxyapatite as a major inorganic component by freeze drying technique for alveolar bone regeneration. The prepared keratin/hydroxyapatite/HPMC (K/HA/HPMC) scaffold was characterized to study its chemical, physical, and mechanical properties by Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), Energy dispersive X-ray spectroscopy (EDX), X-Ray diffractometric (XRD) analysis. The SEM images of the scaffolds showed highly porous interconnected architecture with average pore size of 108.36 ± 22.56 while microcomputed tomographic analysis measured total porosity as 79.65 %±. Energy dispersive X-ray spectroscopic (EDX) analysis confirmed that inorganic component of scaffold was mainly composed of calcium and phosphorous ions having Ca/P molar ration of 1.6. The maximum compressive strength was found to be in the range of 0.841 ± 0.37 MPa. Furthermore, the K/HA/HPMC scaffold was structurally stable and weight loss of about 26% was observed when soaked in phosphate buffered solution (PBS) for 28 days. In vitro biocompatibility testing showed that K/HA/HPMC scaffold was cytocompatible and supported the attachment, proliferation of osteoblast (Saos-2) cells. Thus, the development of a non-toxic chemical cross-linking system with HPMC was investigated to fabricate K/HA/HPMC scaffold and our results showed great potential of these scaffolds to regenerate alveolar bone due to their structural similarity and excellent in vitro biocompatibility.

Initial mechanical conditions within an optimized bone scaffold do not ensure bone regeneration - an in silico analysis

Large bone defects remain a clinical challenge because they do not heal spontaneously. 3-D printed scaffolds are a promising treatment option for such critical defects. Recent scaffold design strategies have made use of computer modelling techniques to optimize scaffold design. In particular, scaffold geometries have been optimized to avoid mechanical failure and recently also to provide a distinct mechanical stimulation to cells within the scaffold pores. This way, mechanical strain levels are optimized to favour the bone tissue formation. However, bone regeneration is a highly dynamic process where the mechanical conditions immediately after surgery might not ensure optimal regeneration throughout healing. Here, we investigated in silico whether scaffolds presenting optimal mechanical conditions for bone regeneration immediately after surgery also present an optimal design for the full regeneration process. A computer framework, combining an automatic parametric scaffold design generation with a mechano-biological bone regeneration model, was developed to predict the level of regenerated bone volume for a large range of scaffold designs and to compare it with the scaffold pore volume fraction under favourable mechanical stimuli immediately after surgery. We found that many scaffold designs could be considered as highly beneficial for bone healing immediately after surgery; however, most of them did not show optimal bone formation in later regenerative phases. This study allowed to gain a more thorough understanding of the effect of scaffold geometry changes on bone regeneration and how to maximize regenerated bone volume in the long term.

Role of Hydroxyapatite and Ellagic Acid in the Osteogenesis

OBJECTIVE

 Ellagic acid (EA), a phenolic antioxidant, has benefits in bone health and wound healing. The combination of EA and hydroxyapatite (HA) (EA-HA) is expected to increase osteogenesis. The aim of this study was to analyze osteogenesis after application of EA-HA according to the number of osteoblasts and osteoclasts in the bone and the expression of the receptor activator of nuclear factor kappa-B ligand (RANKL), osteoprotegerin (OPG), and osteocalcin (OCN) protein.

MATERIALS AND METHODS

 Thirty Wistar rats were assessed with bone defects created in the left femur. The defects were filled with EA-HA and then sutured. Control groups were filled with polyethylene glycol (PEG) or HA. Each group was sacrificed either 7 or 14 days after treatment.

RESULTS

 The defects filled with EA-HA exhibited the highest number of osteoblasts and the greatest expression of OPG and OCN at both day 7 and day 14 (p = 0.000). Conversely, treatment with EA-HA resulted in lower numbers of osteoclasts and reduced RANKL staining at both time points (p = 0.000).

CONCLUSIONS

 EA-HA can increase osteogenesis in bone defects by increasing the number of osteoblasts and the expression of OPG and OCN.

Mechano-Biological Computer Model of Scaffold-Supported Bone Regeneration: Effect of Bone Graft and Scaffold Structure on Large Bone Defect Tissue Patterning

Large segmental bone defects represent a clinical challenge for which current treatment procedures have many drawbacks. 3D-printed scaffolds may help to support healing, but their design process relies mainly on trial and error due to a lack of understanding of which scaffold features support bone regeneration. The aim of this study was to investigate whether existing mechano-biological rules of bone regeneration can also explain scaffold-supported bone defect healing. In addition, we examined the distinct roles of bone grafting and scaffold structure on the regeneration process. To that end, scaffold-surface guided migration and tissue deposition as well as bone graft stimulatory effects were included in an in silico model and predictions were compared to in vivo data. We found graft osteoconductive properties and scaffold-surface guided extracellular matrix deposition to be essential features driving bone defect filling in a 3D-printed honeycomb titanium structure. This knowledge paves the way for the design of more effective 3D scaffold structures and their pre-clinical optimization, prior to their application in scaffold-based bone defect regeneration.

Peptide-Enriched Silk Fibroin Sponge and Trabecular Titanium Composites to Enhance Bone Ingrowth of Prosthetic Implants in an Ovine Model of Bone Gaps

Osteoarthritis frequently requires arthroplasty. Cementless implants are widely used in clinics to replace damaged cartilage or missing bone tissue. In cementless arthroplasty, the risk of aseptic loosening strictly depends on implant stability and bone–implant interface, which are fundamental to guarantee the long-term success of the implant. Ameliorating the features of prosthetic materials, including their porosity and/or geometry, and identifying osteoconductive and/or osteoinductive coatings of implant surfaces are the main strategies to enhance the bone-implant contact surface area. Herein, the development of a novel composite consisting in the association of macro-porous trabecular titanium with silk fibroin (SF) sponges enriched with anionic fibroin-derived polypeptides is described. This composite is applied to improve early bone ingrowth into the implant mesh in a sheep model of bone defects. The composite enables to nucleate carbonated hydroxyapatite and accelerates the osteoblastic differentiation of resident cells, inducing an outward bone growth, a feature that can be particularly relevant when applying these implants in the case of poor osseointegration. Moreover, the osteoconductive properties of peptide-enriched SF sponges support an inward bone deposition from the native bone towards the implants. This technology can be exploited to improve the biological functionality of various prosthetic materials in terms of early bone fixation and prevention of aseptic loosening in prosthetic surgery.

Pre-Clinical Evaluation of Biological Bone Substitute Materials for Application in Highly Loaded Skeletal Sites

The development of bone substitute materials (BSMs) intended for load-bearing bone defects is highly complicated, as biological and mechanical requirements are often contradictory. In recent years, biological BSMs have been developed which allow for a more efficient integration of the material with the surrounding osseous environment and, hence, a higher mechanical stability of the treated defect. However, while these materials are promising, they are still far from ideal. Consequently, extensive preclinical experimentation is still required. The current review provides a comprehensive overview of biomechanical considerations relevant for the design of biological BSMs. Further, the preclinical evaluation of biological BSMs intended for application in highly loaded skeletal sites is discussed. The selected animal models and implantation site should mimic the pathophysiology and biomechanical loading patterns of human bone as closely as possible. In general, sheep are among the most frequently selected animal models for the evaluation of biomaterials intended for highly loaded skeletal sites. Regarding the anatomical sites, segmental bone defects created in the limbs and spinal column are suggested as the most suitable. Furthermore, the outcome measurements used to assess biological BSMs for regeneration of defects in heavily loaded bone should be relevant and straightforward. The quantitative evaluation of bone defect healing through ex vivo biomechanical tests is a valuable addition to conventional in vivo tests, as it determines the functional efficacy of BSM-induced bone healing. Finally, we conclude that further standardization of preclinical studies is essential for reliable evaluation of biological BSMs in highly loaded skeletal sites.

Characterization and Comparison of Human and Ovine Mesenchymal Stromal Cells from Three Corresponding Sources

Currently, there is an increasing focus on mesenchymal stromal cells (MSC) as therapeutic option in bone pathologies as well as in general regenerative medicine. Although human MSCs have been extensively characterized and standardized, ovine MSCs are poorly understood. This limitation hampers clinical progress, as sheep are an excellent large animal model for orthopedic studies. Our report describes a direct comparison of human and ovine MSCs from three corresponding sources under the same conditions. All MSCs presented solid growth behavior and potent immunomodulatory capacities. Additionally, we were able to identify common positive (CD29, CD44, CD73, CD90, CD105, CD166) and negative (CD14, CD34, CD45, HLA-DR) surface markers. Although both human and ovine MSCs showed strong osteogenic potential, direct comparison revealed a slower mineralization process in ovine MSCs. Regarding gene expression level, both human and ovine MSCs presented a comparable up-regulation of Runx2 and a trend toward down-regulation of Col1A during osteogenic differentiation. In summary, this side by side comparison defined phenotypic similarities and differences of human and ovine MSCs from three different sources, thereby contributing to a better characterization and standardization of ovine MSCs. The key findings shown in this report demonstrate the utility of ovine MSCs in preclinical studies for MSC-based therapies.

Towards multi-dynamic mechano-biological optimization of 3D-printed scaffolds to foster bone regeneration

Substantial tissue loss, such as in large bone defects, represents a clinical challenge for which regenerative therapies and tissue engineering strategies aim at offering treatment alternatives to conventional replacement approaches by metallic implants. 3D printing technologies provide endless opportunities to shape scaffold structures that could support endogenous regeneration. However, it remains unclear which of the numerous parameters at hand eventually enhance tissue regeneration. In the last decades, a significant effort has been made in the development of computer tools to optimize scaffold designs. Here, we aim at giving a more comprehensive overview summarizing current computer optimization framework technologies. We confront these with the most recent advances in scaffold mechano-biological optimization, discuss their limitations and provide suggestions for future development. We conclude that the field needs to move forward to not only optimize scaffolds to avoid implant failures but to improve their mechano-biological behaviour: providing an initial stimulus for fast tissue organisation and healing and accounting for remodelling, scaffold degradation and consecutive filling with host tissue. So far, modelling approaches fall short in including the various scales of tissue dynamics. With this review, we wish to stimulate a move towards multi-dynamic mechano-biological optimization of 3D-printed scaffolds. STATEMENT OF SIGNIFICANCE: Large bone defects represent a clinical challenge for which tissue engineering strategies aim at offering alternatives to conventional treatment strategies. 3D printing technologies provide endless opportunities to shape scaffold structures that could support endogenous regeneration. However, it remains unclear which of the numerous parameters at hand eventually enhance tissue regeneration. In the last decades, a significant effort has been made in the development of computer tools to optimize scaffold designs. This review summarizes current computer optimization frameworks and most recent advances in mechano-biological optimization of bone scaffolds to better stimulate bone regeneration. We wish to stimulate a move towards multi-dynamic mechano-biological optimization of 3D-printed scaffolds.

Mimicking growth factors: role of small molecule scaffold additives in promoting tissue regeneration and repair

The primary aim of tissue engineering scaffolds is to mimic the in vivo environment and promote tissue growth. In this quest, a number of strategies have been developed such as enhancing cell-material interactions through modulation of scaffold physico-chemical parameters. However, more is required for scaffolds to relate to the cell natural environment. Growth factors (GFs) secreted by cells and extracellular matrix (ECM) are involved in both normal repair and abnormal remodeling. The direct use of GFs on their own or when incorporated within scaffolds represent a number of challenges such as release rate, stability and shelf-life. Small molecules have been proposed as promising alternatives to GFs as they are able to minimize or overcome many shortcomings of GFs, in particular immune response and instability. Despite the promise of small molecules in various TE applications, their direct use is limited by nonspecific adverse effects on non-target tissues and organs. Hence, they have been incorporated within scaffolds to localize their actions and control their release to target sites. However, scanty rationale is available which links the chemical structure of these molecules with their mode of action. We herewith review various small molecules either when used on their own or when incorporated within polymeric carriers/scaffolds for bone, cartilage, neural, adipose and skin tissue regeneration.

Enhancing all-in-one bioreactors by combining interstitial perfusion, electrical stimulation, on-line monitoring and testing within a single chamber for cardiac constructs

Tissue engineering strategies have been extensively exploited to generate functional cardiac patches. To maintain cardiac functionality in vitro, bioreactors have been designed to provide perfusion and electrical stimulation, alone or combined. However, due to several design limitations the integration of optical systems to assess cardiac maturation level is still missing within these platforms. Here we present a bioreactor culture chamber that provides 3D cardiac constructs with a bidirectional interstitial perfusion and biomimetic electrical stimulation, allowing direct cellular optical monitoring and contractility test. The chamber design was optimized through finite element models to house an innovative scaffold anchoring system to hold and to release it for the evaluation of tissue maturation and functionality by contractility tests. Neonatal rat cardiac fibroblasts subjected to a combined perfusion and electrical stimulation showed positive cell viability over time. Neonatal rat cardiomyocytes were successfully monitored for the entire culture period to assess their functionality. The combination of perfusion and electrical stimulation enhanced patch maturation, as evidenced by the higher contractility, the enhanced beating properties and the increased level of cardiac protein expression. This new multifunctional bioreactor provides a relevant biomimetic environment allowing for independently culturing, real-time monitoring and testing up to 18 separated patches.

Settable polymer/ceramic composite bone grafts stabilize weight-bearing tibial plateau slot defects and integrate with host bone in an ovine model

Bone fractures at weight-bearing sites are challenging to treat due to the difficulty in maintaining articular congruency. An ideal biomaterial for fracture repair near articulating joints sets rapidly after implantation, stabilizes the fracture with minimal rigid implants, stimulates new bone formation, and remodels at a rate that maintains osseous integrity. Consequently, the design of biomaterials that mechanically stabilize fractures while remodeling to form new bone is an unmet challenge in bone tissue engineering. In this study, we investigated remodeling of resorbable bone cements in a stringent model of mechanically loaded tibial plateau defects in sheep. Nanocrystalline hydroxyapatite-poly(ester urethane) (nHA-PEUR) hybrid polymers were augmented with either ceramic granules (85% β-tricalcium phosphate/15% hydroxyapatite, CG) or a blend of CG and bioactive glass (BG) particles to form a settable bone cement. The initial compressive strength and fatigue properties of the cements were comparable to those of non-resorbable poly(methyl methacrylate) bone cement. In animals that tolerated the initial few weeks of early weight-bearing, CG/nHA-PEUR cements mechanically stabilized the tibial plateau defects and remodeled to form new bone at 16 weeks. In contrast, cements incorporating BG particles resorbed with fibrous tissue filling the defect. Furthermore, CG/nHA-PEUR cements remodeled significantly faster at the full weight-bearing tibial plateau site compared to the mechanically protected femoral condyle site in the same animal. These findings are the first to report a settable bone cement that remodels to form new bone while providing mechanical stability in a stringent large animal model of weight-bearing bone defects near an articulating joint.

Micro-CT - a digital 3D microstructural voyage into scaffolds: a systematic review of the reported methods and results

BACKGROUND

Cell behavior is the key to tissue regeneration. Given the fact that most of the cells used in tissue engineering are anchorage-dependent, their behavior including adhesion, growth, migration, matrix synthesis, and differentiation is related to the design of the scaffolds. Thus, characterization of the scaffolds is highly required. Micro-computed tomography (micro-CT) provides a powerful platform to analyze, visualize, and explore any portion of interest in the scaffold in a 3D fashion without cutting or destroying it with the benefit of almost no sample preparation need.

MAIN BODY

This review highlights the relationship between the scaffold microstructure and cell behavior, and provides the basics of the micro-CT method. In this work, we also analyzed the original papers that were published in 2016 through a systematic search to address the need for specific improvements in the methods section of the papers including the amount of provided information from the obtained results.

CONCLUSION

Micro-CT offers a unique microstructural analysis of biomaterials, notwithstanding the associated challenges and limitations. Future studies that will include micro-CT characterization of scaffolds should report the important details of the method, and the derived quantitative and qualitative information can be maximized.

Mesenchymal stem cells and porous β-tricalcium phosphate composites prepared through stem cell screen-enrich-combine(-biomaterials) circulating system for the repair of critical size bone defects in goat tibia

BACKGROUND

Efficacious bone substitute is essential for the treatment of a critical size bone defect. Currently, the bone substitutes commonly used in clinical practice lack osteogenic capacity and the therapeutic efficacy is not ideal. Herein, a novel stem cell screen-enrich-combine(-biomaterials) circulating system (SECCS) was introduced to provide the substitutes with osteogenic ability. The stem cell screening, enrichment, and recombination with substitutes could be integrated during the surgical operation. Using SECCS, the bioactive mesenchymal stem cells (MSCs) and porous β-tricalcium phosphate (β-TCP) composites (MSCs/β-TCP) were rapidly prepared for critical size bone defect repair and validated in goat models of critical size tibia defects.

METHODS

Twelve goats with right hind limb tibia defects of 30 mm were randomly divided into two groups: six (the experimental group) were treated with MSCs/β-TCP prepared by SECCS and the other six goats (the control group) were treated with pure porous β-TCP. The repair effect was assessed by x-ray, computed tomography (CT), micro-CT, histology and histomorphology 6 months after the operation. In addition, the enrichment efficacy of MSCs and the characteristics of the MSCs/β-TCP prepared by SECCS were evaluated.

RESULTS

The SECCS could compound about 81.3 ± 3.0% of the MSCs in bone marrow to the porous β-TCP without affecting the cell viability. The average number of MSCs for retransplantation was 27,655.0 ± 5011.6 for each goat from the experimental group. In vitro, satisfactory biocompatibility of the MSCs/β-TCP was performed, with the MSCs spreading adequately, proliferating actively, and retaining the osteogenic potential. In vivo, the defect repair by MSCs/β-TCP with good medullary cavity recanalization and cortical remodeling was significantly superior to that of pure porous β-TCP.

CONCLUSIONS

The MSCs/β-TCP prepared through SECCS demonstrated significant therapeutic efficacy in goat models of critical size bone defect. This provides a novel therapeutic strategy for critical size bone defects caused by severe injury, infection, and bone tumor resection with a high profile of safety, effectiveness, simplicity, and ease.

Long-Term Follow-Up Comparative Study of Hydroxyapatite and Autologous Cranioplasties: Complications, Cosmetic Results, Osseointegration

OBJECTIVE

A three-dimensional reconstruction technique using the CustomBone (CB) prosthesis allows custom-made cranioplasty (CP) possessing osseointegration properties owing to its porous hydroxyapatite (HA) composition. This reconstruction technique has replaced less expensive techniques such as subcutaneously preserved autologous bone (SP). Our primary objective was to evaluate complications between CB and SP CP techniques. A secondary objective was to assess cosmetic results and osseointegration of CPs.

METHODS

This single-center study comprised patients undergoing delayed CB or SP CP after craniectomy between 2007 and 2014. A prospective interview was conducted to collect all data, including 2-year follow-up clinical and radiologic data. Cosmetic results were assessed by a qualitative score, and osseointegration was assessed by measuring relative fusion at the CP margins.

RESULTS

Of 100 patients undergoing CB or SP CP between 2007 and 2014, 92 (CB, n = 44; SP, n = 48) participated in the prospective interview. No significant difference in complication rates was observed between the 2 groups. The main complication specific to the CB group was fracture of the prosthesis observed in 20.8% patients. A higher rate of good cosmetic results was observed in the CB group (92.5% vs. 74.3%, P = 0.031). In the CB group, 51% of patients demonstrated no signs of bone fusion of the CP.

CONCLUSIONS

Although the CB prosthesis is associated with cosmetic advantages, the porous hydroxyapatite composition makes it fragile in the short-term and long-term, and effective osseointegration remains uncertain.

A novel finite element model of the ovine lumbar intervertebral disc with anisotropic hyperelastic material properties

The Ovine spine is an accepted model to investigate the biomechanical behaviour of the human lumbar one. Indeed, the use of animal models for in vitro studies is necessary to investigate the mechanical behaviour of biological tissue, but needs to be reduced for ethical and social reasons. The aim of this study was to create a finite element model of the lumbar intervertebral disc of the sheep that may help to refine the understanding of parallel in vitro experiments and that can be used to predict when mechanical failure occurs. Anisotropic hyperelastic material properties were assigned to the annulus fibrosus and factorial optimization analyses were performed to find out the optimal parameters of the ground substance and of the collagen fibers. For the ground substance of the annulus fibrosus the investigation was based on experimental data taken from the literature, while for the collagen fibers tensile tests on annulus specimens were conducted. Flexibility analysis in flexion-extension, lateral bending and axial rotation were conducted. Different material properties for the anterior, lateral and posterior regions of the annulus were found. The posterior part resulted the stiffest region in compression whereas the anterior one the stiffest region in tension. Since the flexibility outcomes were in a good agreement with the literature data, we considered this model suitable to be used in conjunction with in vitro and in vivo tests to investigate the mechanical behaviour of the ovine lumbar disc.

Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?

Tissue engineering is a promising alternative to autografts or allografts for the regeneration of large bone defects. Cell-free biomaterials with different degrees of sophistication can be used for several therapeutic indications, to stimulate bone repair by the host tissue. However, when osteoprogenitors are not available in the damaged tissue, exogenous cells with an osteoblast differentiation potential must be provided. These cells should have the capacity to colonize the defect and to participate in the building of new bone tissue. To achieve this goal, cells must survive, remain in the defect site, eventually proliferate, and differentiate into mature osteoblasts. A critical issue for these engrafted cells is to be fed by oxygen and nutrients: the transient absence of a vascular network upon implantation is a major challenge for cells to survive in the site of implantation, and different strategies can be followed to promote cell survival under poor oxygen and nutrient supply and to promote rapid vascularization of the defect area. These strategies involve the use of scaffolds designed to create the appropriate micro-environment for cells to survive, proliferate, and differentiate in vitro and in vivo. Hydrogels are an eclectic class of materials that can be easily cellularized and provide effective, minimally invasive approaches to fill bone defects and favor bone tissue regeneration. Furthermore, by playing on their composition and processing, it is possible to obtain biocompatible systems with adequate chemical, biological, and mechanical properties. However, only a good combination of scaffold and cells, possibly with the aid of incorporated growth factors, can lead to successful results in bone regeneration. This review presents the strategies used to design cellularized hydrogel-based systems for bone regeneration, identifying the key parameters of the many different micro-environments created within hydrogels.