The Fate of Elements in Residential Composters

Influence of dairy manure addition on the biological and thermal kinetics of composting of greenhouse tomato plant residues

A laboratory-scale bioreactor was used to investigate the influence of dairy manure addition (as an inoculum and a carbon source) on the biological and thermal kinetics of the composting process of tomato plant residues-wood shavings mixture. Urea was added (as a nitrogen source) to correct the initial C:N ratio to 30:1 and the initial moisture content was also adjusted to 60%. The result of this study indicated that manure addition to the tomato residues-wood shavings mixture is a good source of macro and micronutrients required for supporting the composting microorganisms. Manure addition increased the rate of temperature increase and the duration of maximum temperature and reduced the lag and the peak time, all of which resulted in a significant reduction in the retention time. However, thermophilic temperature (> or = 40 degrees Celsius) was only achieved with 30%, 40% and 50% manure addition for 3, 7 and 9h. Total carbon reductions were in the range of 9.4-10.8% and TKN reductions were in the range of 3.4-6.0%. Neither the nitrogen nor the moisture content were limiting factors as the C:N ratio remained in the range of 26:1 to 28:1 and the moisture content remained within the optimum range of 58-61%. The maximum temperature of each mixture correlated with the reduction of total carbon, but carbon availability was a limiting factor in these experiments. In order to attain and sustain a thermophilic phase during the composting process, the addition of a readily available carbon source to the tomato should be investigated and carbon type (carbohydrates, proteins and fats) should be taken into account.

Measurement of PM10/2.5 fractionated respirable particles in urban Toronto by INAA, PIXE, ICP-AES, and LAMS. A comparison

The chemical analysis of urban Toronto airborne particulate matter (PM), size segregated into respirable PM10/2.5, is presented. The characterization of PM by use of proton-induced X-ray emission analysis (PIXE), and inductively coupled plasma-atomic emission spectrometry revealed elemental information; a newer laser ablation-ionization mass spectrometry approach has the potential to expand the chemical information from PM by analyzing both the inorganic and organic species. These PM analytical approaches will be continued in the future for studying (1) emission source identification, (2) inhalation health hazards, and (3) urban smog chemistry.