Biohybrid nanosystems with polymer nanofibers and nanotubes

Cleaner and Sustainable Production of Core-Sheath Polymer Fibres

The amalgamation of sustainable practises throughout the fabrication process with advanced material engineering holds promise not only for eco-conscious manufacturing but also for promoting technological advancements in versatile material design and application. Moreover, technological innovation serves as a catalyst for sustainability initiatives, driving innovation and enabling the adoption of greener practises across industries. This study investigates redefining the production protocol of pressure spinning to produce core-sheath polymer fibres, deepening sustainable practises. It aims to explore innovative approaches such as modifying spinning parameters, optimising polymer solvent configurations and understanding fluid behaviour to curtail material wastage and maintain minimal energy consumption without compromising production efficiency. Utilising Polyvinylpyrrolidone (PVP) for the core and Polyethylene oxide (PEO) for the sheath, production rates of up to 64 g/h were achieved with a fibre diameter range of 3.2 ± 1.7 µm to 4.6 ± 2.0 µm. Energy consumption per mass of fibres produced showed a decreasing trend overall with increasing applied gas pressure. These findings highlight the potential for the efficient and scalable production of core-sheath fibres with applications in various advanced materials fields.

Electrospinning Drug-Loaded Alginate-Based Nanofibers towards Developing a Drug Release Rate Catalog

Electrospinning natural polymers represents a developing interest in the field of biomaterials. Electrospun nanofibers have been shown to facilitate tissue regeneration and emulate body tissue, making them ideal for modern biomedical applications. These water-soluble natural polymers including alginate, have also shown promise as drug delivery vehicles. However, many biopolymers including alginate are inherently charged, making the formation of nanofibers difficult. To better understand the potential of natural polymer-based fibers in drug delivery applications, fiber formulations and drug loading concentrations of alginate-based scaffolds were investigated. It was found electrospinning poly(vinyl alcohol) with alginate facilitated fiber formation while the co-polymer agarose showed minor improvement in terms of alginate electrospinnability. Once uniform fibers were formed, the antibiotic ciprofloxacin was added into the polymer electrospinning solution to yield drug-loaded nanofibers. These optimized parameters coupled with small molecule release rate data from the drug-loaded, alginate-based fibers have been used to establish a catalog of small molecule release profiles. In the future, this catalog will be further expanded to include drug release rate data from other innately charged natural polymer-based fibers such as chitosan. It is anticipated that the cataloged profiles can be applied in the further development of biomaterials used in drug delivery.

Biomimicking spider webs for effective fog water harvesting with electrospun polymer fibers

Fog is an underestimated source of water, especially in regions where conventional methods of water harvesting are impossible, ineffective, or challenging for low-cost water resources. Interestingly, many novel methods and developments for effective water harvesting are inspired by nature. Therefore, in this review, we focused on one of the most researched and developing forms of electrospun polymer fibers, which successfully imitate many fascinating natural materials for instance spider webs. We showed how fiber morphology and wetting properties can increase the fog collection rate, and also observed the influence of fog water collection parameters on testing their efficiency. This review summarizes the current state of the art on water collection by fibrous meshes and offers suggestions for the testing of new designs under laboratory conditions by classifying the parameters already reported in experimental set-ups. This is extremely important, as fog collection under laboratory conditions is the first step toward creating a new water harvesting technology. This review summarizes all the approaches taken so far to develop the most effective water collection systems based on electrospun polymer fibers.

Multidrug-loaded electrospun micro/nanofibrous membranes: Fabrication strategies, release behaviors and applications in regenerative medicine

Electrospun micro/nanofibrous membranes (EFMs) have been widely investigated as local drug delivery systems. Multiple drugs can be simultaneously incorporated into one EFM to create synergistic effects, reduce side effects, and play their respective roles in the complex physiological processes of tissue regeneration and postoperative adhesion prevention. Due to the versatile electrospinning techniques, sustained and programmed release behaviors of multiple drugs could be achieved by modulating the structure of the EFMs and the location of the drugs. In this review, various multidrug incorporation approaches based on electrospinning are overviewed. In particular, the advantages and limitations of each drug incorporation technique, the methods to control drug release and the effect of one drug release on another are discussed. Then the applications of multidrug-loaded EFMs in regenerative medicine, including wound healing, bone regeneration, vascular tissue engineering, nerve regeneration, periodontal regeneration and adhesion prevention are comprehensively reviewed. Finally, the future perspectives and challenges in the research of multidrug-loaded EFMs are discussed.

Polymeric carriers for enhanced delivery of probiotics

Probiotics are live microorganisms (usually bacteria), which are defined by their ability to confer health benefits to the host, if administered adequately. Probiotics are not only used as health supplements but have also been applied in various attempts to prevent and treat gastrointestinal (GI) and non-gastrointestinal diseases such as diarrhea, colon cancer, obesity, diabetes, and inflammation. One of the challenges in the use of probiotics is putative loss of viability by the time of administration. It can be due to procedures that the probiotic products go through during fabrication, storage, or administration. Biocompatible and biodegradable polymers with specific moieties or pH/enzyme sensitivity have shown great potential as carriers of the bacteria for 1) better viability, 2) longer storage times, 3) preservation from the aggressive environment in the stomach and 4) topographically targeted delivery of probiotics. In this review, we focus on polymeric carriers and the procedures applied for encapsulation of the probiotics into them. At the end, some novel methods for specific probiotic delivery, possibilities to improve the targeted delivery of probiotics and some challenges are discussed.

Hyaluronan-Based Nanofibers: Fabrication, Characterization and Application

Nano- and microfibers based on biopolymers are some of the most attractive issues of biotechnology due to their unique properties and effectiveness. Hyaluronan is well-known as a biodegradable, naturally-occurring polymer, which has great potential for being utilized in a fibrous form. The obtaining of fibers from hyaluronan presents a major challenge because of the hydrophilic character of the polymer and the high viscosity level of its solutions. Electrospinning, as the advanced and effective method of the fiber generation, is difficult. The nano- and microfibers from hyaluronan may be obtained by utilizing special techniques, including binary/ternary solvent systems and several polymers described as modifying (or carrying), such as polyethylene oxide (PEO) and polyvinyl alcohol (PVA). This paper reviews various methods for the synthesis of hyaluronan-based fibers, and also collects brief information on the properties and biological activity of hyaluronan and fibrous materials based on it.

Emerging frontiers in drug release control by core-shell nanofibers: a review

In recent years, core-shell (CS) nanofiber has widely been used as a carrier for controlled drug release. This outstanding attention toward CS nanofiber is mainly due to its tremendous significance in controllable drug release in specific locations. The major advantage of CS nanofibers is forming a highly porous mesh, boosting its performance for many applications, due to its large surface-to-volume ratio. This inherently high ratio has prompted electrospun fibers to be considered one of the best drug-delivery-systems available, with the capacity to enhance properties such as cell attachment, drug loading, and mass transfer. Using electrospun fibers as CS nanofibers to incorporate different cargos such as antibiotics, anticancer agents, proteins, DNA, RNA, living cells, and diverse growth factors would considerably satisfy the need for a universal carrier in the field of nanotechnology. In addition to their high surface area, other benefit included in these nanofibers is the ability to trap drugs, easily controlled morphology, and their biomimetic characteristics. In this review, by taking the best advantages of the preparation and uses of CS nanofibers, a novel work in the domain of the controlled drug delivery by nanofiber-based scaffolds is presented.

Nanoparticulate drug delivery systems for the treatment of neglected tropical protozoan diseases

Neglected Tropical Diseases (NTDs) comprise of a group of seventeen infectious conditions endemic in many developing countries. Among these diseases are three of protozoan origin, namely leishmaniasis, Chagas disease, and African trypanosomiasis, caused by the parasites Leishmania spp., Trypanosoma cruzi, and Trypanosoma brucei respectively. These diseases have their own unique challenges which are associated with the development of effective prevention and treatment methods. Collectively, these parasitic diseases cause more deaths worldwide than all other NTDs combined. Moreover, many current therapies for these diseases are limited in their efficacy, possessing harmful or potentially fatal side effects at therapeutic doses. It is therefore imperative that new treatment strategies for these parasitic diseases are developed. Nanoparticulate drug delivery systems have emerged as a promising area of research in the therapy and prevention of NTDs. These delivery systems provide novel mechanisms for targeted drug delivery within the host, maximizing therapeutic effects while minimizing systemic side effects. Currently approved drugs may also be repackaged using these delivery systems, allowing for their potential use in NTDs of protozoan origin. Current research on these novel delivery systems has provided insight into possible indications, with evidence demonstrating their improved ability to specifically target pathogens, penetrate barriers within the host, and reduce toxicity with lower dose regimens. In this review, we will examine current research on these delivery systems, focusing on applications in the treatment of leishmaniasis, Chagas disease, and African trypanosomiasis. Nanoparticulate systems present a unique therapeutic alternative through the repositioning of existing medications and directed drug delivery.

Biodegradable core-shell electrospun nanofibers containing bevacizumab to treat age-related macular degeneration

Age-related macular degeneration (AMD) is a degenerative ocular disease that affects the central retina. It is considered the main cause of blindness and loss of vision worldwide. Angiogenic factors are associated with AMD, which has led to the use of antiangiogenic drugs, such as bevacizumab, to treat the disease using frequent intravitreal injections. In the present study, biodegradable core shell nanofibers containing bevacizumab were prepared by the coaxial electrospinning technique. It is thought that the shell could control the release of the drug, while the core would protect and store the drug. Poly(caprolactone) (PCL) and gelatin were used to form the shell of the nanofibers, while poly(vinyl alcohol) (PVA) and bevacizumab comprised the core. The nanofibers were characterized using microscopy techniques, thermal analysis, and FTIR. The results showed that core-shell nanofibers were produced as designed. Bevacizumab activity was evaluated using a chicken embryo chorioallantoic membrane (CAM) assay. An enzyme-linked immunosorbent assay was used to quantify the amount of the drug released from the different nanofibers in vitro. The toxicity of the nanofibers was evaluated in human retinal pigment epithelial (ARPE) cells. The CAM results demonstrated that bevacizumab maintained its antiangiogenic activity when incorporated into the nanofibers. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) tests revealed that the nanofibers showed no cellular toxicity, even in the presence of bevacizumab. The core-shell structure of the nanofibers reduced the release rate of bevacizumab compared with PVA nanofibers. The bevacizumab-loaded biodegradable nanofibers presented interesting properties that would potentially constitute an alternative therapy to intravitreal injections to treat AMD.

Biodegradable and biocompatible soy protein/polymer/adhesive sticky nano-textured interfacial membranes for prevention of esca fungi invasion into pruning cuts and wounds of vines

Adhesive biodegradable membranes (patches) for the protection of pruning locations of plants from esca fungi attacks were developed using electrospun soy protein/polyvinyl alcohol and soy protein/polycaprolactone nanofibers. Several different water-soluble adhesives were either added directly to the electrospinning solutions or electrosprayed onto the as-spun nanofiber mats. The nanofibers were deposited onto a biodegradable rayon membrane, and are to be pressed onto the pruned location on a plant. The pore size in the nanofiber mats is sufficient for physically blocking fungi penetration, while the outside rayon membrane provides sufficient mechanical support in handling prior to deposition on a plant. Diseases like Vine Decline are one of the most important cases where such a remedy would be needed. It should be emphasized that these novel biodegradable and sticky patches are radically different from the ordinary electrospun ultra-filtration membranes. The normal and shear specific adhesive energy of the patches were measured, and the results show that they can withstand strong wind without being blown off. On the other hand, the patches possess sufficient porosity for plant breathing.

A facile pathway to polyurea nanofiber fabrication and polymer morphology control in copolymerization of oxydianiline and toluene diisocyanate in acetone

Polyurea nanofibers, of high thermal stability and solvent resistance, were obtained through simple precipitation polymerization of TDI and ODA in acetone at 30 °C.

Electrospun scaffolds for tissue engineering of vascular grafts

There is a growing demand for off-the-shelf tissue engineered vascular grafts (TEVGs) for the replacement or bypass of damaged arteries in various cardiovascular diseases. Scaffolds from the decellularized tissue skeletons to biopolymers and biodegradable synthetic polymers have been used for fabricating TEVGs. However, several issues have not yet been resolved, which include the inability to mimic the mechanical properties of native tissues, and the ability for long-term patency and growth required for in vivo function. Electrospinning is a popular technique for the production of scaffolds that has the potential to address these issues. However, its application to human TEVGs has not yet been achieved. This review provides an overview of tubular scaffolds that have been prepared by electrospinning with potential for TEVG applications.

Blocked bacteria escape by ATRP grafting of a PMMA shell on PVA microparticles

This paper reports on the preparation and characterization of living composites consisting of poly(vinylalcohol) (PVA) hydrogel microparticles with living bacteria and a shell of poly(methyl methacrylate) (PMMA). The grafting of the PMMA shell is accomplished in the presence of living bacteria by surface polymerization of PMMA using atom transfer radical polymerization (ATRP). The PMMA shell prevents the uncontrolled bacterial escape from the hydrogel microparticles, which otherwise marks a major problem of these composites. The encapsulation of microparticles with living bacteria by PMMA retards bacteria escape upon contact to water for >20 d. The functionality of the PMMA shell is proven both by the release of fluorescein in buffer and an altered release time of bacteria in buffer solution.

Air filter devices including nonwoven meshes of electrospun recombinant spider silk proteins

Based on the natural sequence of Araneus diadematus Fibroin 4 (ADF4), the recombinant spider silk protein eADF4(C16) has been engineered. This highly repetitive protein has a molecular weight of 48kDa and is soluble in different solvents (hexafluoroisopropanol (HFIP), formic acid and aqueous buffers). eADF4(C16) provides a high potential for various technical applications when processed into morphologies such as films, capsules, particles, hydrogels, coatings, fibers and nonwoven meshes. Due to their chemical stability and controlled morphology, the latter can be used to improve filter materials. In this protocol, we present a procedure to enhance the efficiency of different air filter devices, by deposition of nonwoven meshes of electrospun recombinant spider silk proteins. Electrospinning of eADF4(C16) dissolved in HFIP results in smooth fibers. Variation of the protein concentration (5-25% w/v) results in different fiber diameters (80-1,100 nm) and thus pore sizes of the nonwoven mesh.

Post-treatment of eADF4(C16) electrospun from HFIP is necessary since the protein displays a predominantly α-helical secondary structure in freshly spun fibers, and therefore the fibers are water soluble. Subsequent treatment with ethanol vapor induces formation of water resistant, stable β-sheet structures, preserving the morphology of the silk fibers and meshes. Secondary structure analysis was performed using Fourier transform infrared spectroscopy (FTIR) and subsequent Fourier self-deconvolution (FSD).

The primary goal was to improve the filter efficiency of existing filter substrates by adding silk nonwoven layers on top. To evaluate the influence of electrospinning duration and thus nonwoven layer thickness on the filter efficiency, we performed air permeability tests in combination with particle deposition measurements. The experiments were carried out according to standard protocols.

Revolutionary impact of nanodrug delivery on neuroscience

Brain research is the most expanding interdisciplinary research that is using the state of the art techniques to overcome limitations in order to conduct more accurate and effective experiments. Drug delivery to the target site in the central nervous system (CNS) is one of the most difficult steps in neuroscience researches and therapies. Taking advantage of the nanoscale structure of neural cells (both neurons and glia); nanodrug delivery (second generation of biotechnological products) has a potential revolutionary impact into the basic understanding, visualization and therapeutic applications of neuroscience. Current review article firstly provides an overview of preparation and characterization, purification and separation, loading and delivering of nanodrugs. Different types of nanoparticle bioproducts and a number of methods for their fabrication and delivery systems including (carbon) nanotubes are explained. In the second part, neuroscience and nervous system drugs are deeply investigated. Different mechanisms in which nanoparticles enhance the uptake and clearance of molecules form cerebrospinal fluid (CSF) are discussed. The focus is on nanodrugs that are being used or have potential to improve neural researches, diagnosis and therapy of neurodegenerative disorders.

Electrospinning collagen and hyaluronic acid nanofiber meshes

Collagen and hyaluronic acid (HA) are main components of the extracellular matrix and have been utilized in electrospinning; a technique that creates nanosized fibers for tissue scaffolds. A collagen/HA polymer solution was electrospun into a scaffold material for osteoporosis patients who have reduced bone strength. To synthesize nanofibers, a high voltage was applied to the polymer solution to draw out nanofibers that were collected on a ground plate as a uniform mesh. The meshes were then crosslinked to render them insoluble and conjugated with gold nanoparticles to promote biocompatibility. Characterization of the mesh was performed using scanning electron microscope, electron dispersive spectroscopy and fourier transform infrared spectroscopy. A WST-1 assay determined the potential biocompatibility. The results show that collagen/HA scaffolds were developed that were insoluble in aqueous solutions and promoted cellular attachment that could be used as a tissue engineered scaffold to promote cell growth.

Coaxial electrospun poly(methyl methacrylate)-polyacrylonitrile nanofibers: atomic force microscopy and compositional characterization

Poly(methyl methacrylate) (PMMA)-polyacrylonitrile (PAN) fibers were prepared using a conventional single-nozzle electrospinning technique. The as-spun fibers exhibited core-shell morphology as verified by transmission electron microscopy (TEM) and atomic force microscopy (AFM). AFM-phase and modulus mapping images of the fiber cross-section and X-ray photoelectron spectroscopy (XPS) analysis indicated that PAN formed the shell and PMMA formed the core material. XPS, thermogravimetric analysis (TGA), and elemental analysis were used to determine fiber compositional information. Soaking the fibers in solvent demonstrated removal of the core material, generating hollow PAN fibers.

Release kinetics and in vitro bioactivity of basic fibroblast growth factor: effect of the thickness of fibrous matrices

In this study, we fabricated non-woven matrices using blends of polycaprolactone and gelatin with various spinning volumes to control the immobilized heparin content, which was ultimately intended to increase the immobilization efficiency of bFGF. The amount of bFGF on the heparin conjugated fibrous matrices depended on the thicknesses of the swollen matrices ranging from 35.4 ± 6.5 to 162.3 ± 14.0 ng and ≈90% of the bFGF was gradually released over a period of up to 56 d. The released bFGF enhanced the proliferation of human umbilical vein endothelial cells and human mesenchymal stem cells. In conclusion, our heparin-conjugated fibrous matrices have the potential to be used as a growth factor delivery system in tissue engineering applications.

Collagen-PCL sheath-core bicomponent electrospun scaffolds increase osteogenic differentiation and calcium accretion of human adipose-derived stem cells

Human adipose-derived stem cells (hASCs) are an abundant cell source capable of osteogenic differentiation, and have been investigated as an autologous stem cell source for bone tissue engineering applications. The objective of this study was to determine if the addition of a type-I collagen sheath to the surface of poly(ε-caprolactone) (PCL) nanofibers would enhance viability, proliferation and osteogenesis of hASCs. This is the first study to examine the differentiation behavior of hASCs on collagen-PCL sheath-core bicomponent nanofiber scaffolds developed using a co-axial electrospinning technique. The use of a sheath-core configuration ensured a uniform coating of collagen on the PCL nanofibers. PCL nanofiber scaffolds prepared using a conventional electrospinning technique served as controls. hASCs were seeded at a density of 20 000 cells/cm(2) on 1 cm(2) electrospun nanofiber (pure PCL or collagen-PCL sheath-core) sheets. Confocal microscopy and hASC proliferation data confirmed the presence of viable cells after 2 weeks in culture on all scaffolds. Greater cell spreading occurred on bicomponent collagen-PCL scaffolds at earlier time points. hASCs were osteogenically differentiated by addition of soluble osteogenic inductive factors. Calcium quantification indicated cell-mediated calcium accretion was approx. 5-times higher on bicomponent collagen-PCL sheath-core scaffolds compared to PCL controls, indicating collagen-PCL bicomponent scaffolds promoted greater hASC osteogenesis after two weeks of culture in osteogenic medium. This is the first study to examine the effects of collagen-PCL sheath-core composite nanofibers on hASC viability, proliferation and osteogenesis. The sheath-core composite fibers significantly increased calcium accretion of hASCs, indicating that collagen-PCL sheath-core bicomponent structures have potential for bone tissue engineering applications using hASCs.

Nanowalled polymer microtubes fabricated by using strained semiconductor templates

Herein we describe the realization of nanowalled polymeric microtubes through a novel and versatile approach combining the layer-by-layer (LbL) deposition technique, the self-rolling of hybrid polymer/semiconductor microtubes and the subsequent removal of the semiconductor template. The realized channels were characterized in detail using scanning electron and atomic force microscopes. Additionally, we report on the incorporation of a dye molecule within the nanowalls of such microtubes, demonstrating a distribution of the fluorescence signal throughout the whole channel volume. This approach offers the possibility to tailor the properties of micro/nanotubes in terms of size, wall thickness and composition, thus enabling their employment for several applications.

Encapsulation of living bifidobacteria in ultrathin PVOH electrospun fibers

This study shows the application of the electrospinning technique as a viable method for the encapsulation and stabilization of bifidobacterial strains. Poly(vinyl alcohol) (PVOH) was used as the encapsulating material because it is generally recognized as safe (GRAS), has a high oxygen barrier when dry, and is water soluble, hence allowing easy recovery of the bacteria for viability testing. A coaxial setup was used for encapsulation, and the so-obtained electrospun fibers had a mean diameter of ca. 150 nm. Incorporation of B. animalis Bb12 led to a decrease in melting point and crystallinity of the PVOH fibers and to an increase in the polymer glass transition temperature. The viability tests, carried out at three different temperatures (room temperature and 4 and -20 degrees C) showed that B. animalis Bb12 encapsulated within the electrospun PVOH fibers remained viable for 40 days at room temperature and for 130 days at refrigeration temperature, whereas a significant viability decrease was observed in both cases when bacteria were not encapsulated (p = 0.015 and p = 0.002, respectively).