Biochemistry of lactone formation in yeast and fungi and its utilisation for the production of flavour and fragrance compounds

Metabolic power, volatile compounds, and flavor marker formation mechanisms of three fungi isolated from Fengxiangxing Daqu

Introduction

Chinese Daqu is a naturally formed microbial complex, which is the fermenter of Chinese Baijiu. The microorganisms in Chinese Daqu determine the flavor of Chinese Baijiu.

Methods

Based on PacBio SMRT ITS sequencing technology, fungal genome de novo sequencing, and Headspace Solid-Phase Micro-extraction/Gas Chromatography-Mass Spectrometry analyzed and identified three fungi, their abundance, volatile compounds, and flavor markers in Daqu.

Results

Aspergillus chevalieri, Saccharomycopsis fibuligera, and Thermoascus aurantiacus were the three most abundant fungi, with relative abundances of 5.702, 31.686, and 62.256%, respectively. Aspergillus chevalieri and Saccharomycopsis fibuligera were associated with volatile markers of chained terpene alcohols and lactones, with linalool and γ-nonanolactone identified as their flavor markers, respectively. Thermoascus aurantiacus produced the highest variety and content of pyrazine. According to the functional annotation and metabolic relationship of the whole genomes of Aspergillus chevalieri and Saccharomycopsis fibuligera in COG, KEGG and other databases, the formation mechanism and possible metabolic pathways of linalool and γ-nonanolactone were elucidated. The results of the study revealed the different contributions of the three dominant fungi to the volatile compounds of Daqu, can provide ideas for the study of the contribution of other microorganisms to the volatile compounds of Daqu and the mechanism. It can provide a basis for the precise adjustment of the flavor of Daqu, and then the precise modification of the flavor of Baijiu.

Microbial interactions between Lactoplantibacillus plantarum and Rhodotorula mucilaginosa in the fermented fish juice system

Lactic acid bacteria and yeasts play important roles in fermented fish products. The present study investigated the interaction between Lactoplantibacillus plantarum and Rhodotorula mucilaginosa in a fermented fish juice system. The results demonstrated that the co-culture of L. plantarum L6 and R. mucilaginosa Y9 significantly increased the maximum specific growth and population of L. plantarum L6, and decreased the lag phase. During microbial interactions, R. mucilaginosa Y9 increased the concentration of soluble proteins and provided L. plantarum L6 with more TCA-soluble peptides. Additionally, these two strains showed co-metabolism of amino acids, such as glutamic acid and aspartic acid. Furthermore, the microbial interaction between two strains influenced the generation of volatile compounds. R. mucilaginosain Y9 removed some fishy-odors compounds, including 1-Octen-3-ol, 1-Hexanol and phthalate esters, but increased the accumulation of aldehyde compounds with unpleasant odors. In addition, co-cultivation promoted the generation of special compounds, such as γ-dodecalactone and 2-pentylfuran, which could improve the flavor quality of fermented fish products.

Valorization of Oil Cakes in Two-Pot Lactone Biosynthesis Process

Oil cakes are biomass wastes created by pressing oil from oilseeds. Their chemical composition (including high fat or protein content, a favorable fatty acid profile, and a high proportion of unsaturated acids) makes them valuable raw materials not only in animal feeding but are increasingly gaining popularity in biotechnological processes. This article examines the possibility of valorizing oil cakes using the lipid fraction extracted from them or their raw form in a two-pot biosynthesis process of GDDL-a cyclic ester with a creamy-peach aroma. This study tested five types of oil cakes (hemp seeds, rapeseed, safflower, camelina, and flax), analyzing their physicochemical composition and the fatty acid profile of their lipid fraction. Due to the high content of oleic acid (over 62% lipid fraction) and the wide availability, rapeseed cake was used in the biotransformation process. The synthesis of GDDL involved a three-step process: hydrolysis of triacylglycerols, hydration of oleic acid (via lactic acid bacteria in anaerobic conditions), and β-oxidation (via Yarrowia yeast, aerobic process). The analysis showed that it is possible to produce because of the two-pot biotransformation of approximately 1.7 g of GDDL/dm3. These results highlight the process's potential and justify the feasibility of waste valorization. The proposed biotransformation requires optimization and is a good example of the application of the circular economy in food processing and waste management.

Characterization of Important Odorants in Dried Lobster Mushrooms

Lobster mushrooms, a type of wild edible mushroom that primarily grows in North America, have a distinctive aroma resembling seafood and are highly desired by fine dining establishments and food enthusiasts. Lobster mushrooms have a short collection season; therefore, they are usually dried for a year-round sale. Owing to their rising popularity, lobster mushrooms have become one of the most expensive mushroom species in the dried mushroom market. Herein, 35 odorants were identified from dried lobster mushrooms using solvent assisted flavor evaporation (SAFE) and aroma extract dilution analysis (AEDA). Fourteen odorants were quantitated using stable isotope dilution assays (SIDA), and their odor activity values (OAVs) were calculated. Eleven of the quantitated odorants exhibited OAVs of ≥1. Some notable odorants with relatively high OAVs included 2-acetyl-1-pyrroline (OAV 730), γ-nonalactone (OAV 410), 1-octen-3-one (OAV 180), and sotolon (OAV 170). The organohalogen molecule 2,6-dichlorophenol was determined to be key to the seafood aroma character of the mushrooms. An aroma simulation model formulated based on the quantitation data closely matched the aroma profile of the dried mushrooms. This study lays the groundwork for future studies aimed at understanding the effect of processing on lobster mushroom aroma chemistry and the biotechnological production of natural seafood flavors.

A sustainable bioprocess technology for producing food-flavour (+)-γ-decalactone from castor oil-derived ricinoleic acid using enzymatic activity of Candida parapsilosis: Scale-up optimization and purification using novel composite

Ricinoleic acid (RA) from castor oil was employed in biotransformation of peach-flavoured γ-decalactone (GDL), using a Candida parapsilosis strain (MTCC13027) which was isolated from waste of pineapple crown base. Using four variables-pH, cell density, amount of RA, and temperature-the biotransformation parameters were optimized using RSM and BBD. Under optimized conditions (pH 6, 10 % of microbial cells, 10 g/L RA at 28°C), the conversion was maximum and resulted to 80 % (+)-GDL (4.4 g/L/120 h) yield in shake flask (500 mL). Furthermore, optimization was achieved by adjusting the aeration and agitation parameters in a 3 L bioreactor, which were then replicated in a 10 L bioreactor to accurately determine the amount of (+)-GDL. In bioreactor condition, 4.7 g/L (>85 %) of (+)-GDL is produced with 20 % and 40 % dissolved oxygen (1.0 vvm) at 150 rpm in 72 h and 66 h, respectively. Further, a new Al-Mg-Ca-Si composite column-chromatography method is developed to purify enantiospecific (+)-GDL (99.9 %). This (+)-GDL is 100 % nature-identical as validated through 14C-radio-carbon dating. Thorough chemical investigation of enantiospecific (+)-GDL is authenticated for its use as flavour. This bioflavour has been developed through a cost-effective biotechnological process in response to the demand from the food industry on commercial scale.

Optimizing the fermentation parameters in the Lactic Acid Fermentation of Legume-based Beverages- a statistically based fermentation

BACKGROUND

The market for beverages is highly changing within the last years. Increasing consumer awareness towards healthier drinks led to the revival of traditional and the creation of innovative beverages. Various protein-rich legumes were used for milk analogues, which might be also valuable raw materials for refreshing, protein-rich beverages. However, no such applications have been marketed so far, which might be due to unpleasant organoleptic impressions like the legume-typical "beany" aroma. Lactic acid fermentation has already been proven to be a remedy to overcome this hindrance in consumer acceptance.

RESULTS

In this study, a statistically based approach was used to elucidate the impact of the fermentation parameters temperature, inoculum cell concentration, and methionine addition on the fermentation of lupine- and faba bean-based substrates. A total of 39 models were found and verified. The majority of these models indicate a strong impact of the temperature on the reduction of aldehydes connected to the "beany" impression (e.g., hexanal) and on the production of pleasantly perceived aroma compounds (e.g., β-damascenone). Positively, the addition of methionine had only minor impacts on the negatively associated sulfuric compounds methional, dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide. Moreover, in further fermentations, the time was added as an additional parameter. It was shown that the strains grew well, strongly acidified the both substrates (pH ≤ 4.0) within 6.5 h, and reached cell counts of > 9 log10 CFU/mL after 24 h. Notably, most of the aldehydes (like hexanal) were reduced within the first 6-7 h, whereas pleasant compounds like β-damascenone reached high concentrations especially in the later fermentation (approx. 24-48 h).

CONCLUSIONS

Out of the fermentation parameters temperature, inoculum cell concentration, and methionine addition, the temperature had the highest influence on the observed aroma and taste active compounds. As the addition of methionine to compensate for the legume-typical deficit did not lead to an adverse effect, fortifying legume-based substrates with methionine should be considered to improve the bioavailability of the legume protein. Aldehydes, which are associated with the "beany" aroma impression, can be removed efficiently in fermentation. However, terminating the process prematurely would lead to an incomplete production of pleasant aroma compounds.

Decoding the Effects of High Hydrostatic Pressure and High-Temperature Short-Time Sterilization on the Volatile Aroma Profile of Red Raspberry Juice

The loss of distinctive aromas due to sterilization significantly hinders efforts to enhance the sensory quality of fruit and vegetable juices. This study aimed to elucidate the impacts of high-hydrostatic pressure (HHP) and high-temperature short-time (HTST) sterilization methods on the loss of C6 aldehyde aroma-active compounds in red raspberry juice. External standard quantification and quantitative descriptive analysis (QDA) revealed a notable decline in the levels of hexanal and (Z)-3-hexenal following the HHP and HTST treatments (p < 0.05), resulting in a marked attenuation of the grassy aroma characteristic of red raspberry juice. Furthermore, a comprehensive examination of the precursors, pivotal enzymes, intermediates, and downstream aromas within the fatty acid metabolism pathway in different raspberry juice samples indicated that the C6 aldehydes loss induced by HHP and HTST sterilizations was primarily ascribed to the competitive inhibition of β-oxidation and the hindered enzymatic oxidation of fatty acids. These insights suggest that modifying sterilization protocols and enhancing enzymatic stability may help preserve the aroma integrity of raspberry juice. Our findings offer practical guidance for optimizing juice processing techniques to maintain flavor.

One-pot process for the biotransformation of vegetable oils into natural deca- and dodecalactones

Deca- and dodecalactones are highly desired natural compounds that are essential for creating flavor formulations with fruity, peachy, creamy, and floral notes. Although natural ingredients are preferred by consumers, these lactones cannot be extracted from natural sources. Therefore, the biotechnological processes that produce these compounds in their natural form are crucial for the flavor industry. Here, we report a study on the biotransformation of vegetable oils into natural deca- and dodecalactones. The proposed process is performed one-pot, through the sequential use of three different biotransformation steps, namely the lipase-mediated hydrolysis of the triglycerides, the use of probiotic bacteria for the hydration of the unsaturated fatty acids and the transformation of the obtained hydroxy-fatty acids into lactones derivatives employing Yarrowia lipolytica. By using a specific vegetable oil in combination with a selected bacterial strain, it is possible to obtain a preferred lactone derivative such as γ-dodecalactone, dairy lactone, tuberose lactone, or δ-decalactone in a concentration ranging from 0.9 to 1.5 g/L. Overall, our method is suitable for the industrial production of these lactones as it is easily scalable, it can be performed in only one bioreactor and it makes use of generally recognized as safe (GRAS) microorganisms.

Charge inversion under plasma-nanodroplet reaction conditions excludes Fischer esterification for unsaturated fatty acids: a chemical approach for type II isobaric overlap

Direct infusion ionization methods provide the highest throughput strategy for mass spectrometry (MS) analysis of low-volume samples. But the trade-off includes matrix effects, which can significantly reduce analytical performance. Herein, we present a novel chemical approach to tackle a special type of matrix effect, namely type II isobaric overlap. We focus on detailed investigation of a nanodroplet-based esterification chemistry for differentiating isotopologue [M + 2] signal due to unsaturated fatty acid (FA) from the monoisotopic signal from a saturated FA. The method developed involves the online fusion of nonthermal plasma with charged nanodroplets, enabling selective esterification of saturated FAs. We discovered that unsaturated FAs undergo spontaneous intramolecular reaction via a novel mechanism based on a carbocation intermediate to afford a protonated lactone moiety (resonance stabilized cyclic carbonium ion), whose mass is the same as the original protonated unsaturated FA. Therefore, the monoisotopic signal from any saturated FA can be selectively shifted away from the mass-to-charge position where the isobaric interference occurs to enable effective characterization by MS. The mechanism governing the spontaneous intramolecular reactions for unsaturated FAs was validated with DFT calculations, experimentation with standards, and isotope labeling. This novel insight achieved via the ultrafast plasma-nanodroplet reaction environment provides a potentially useful synthetic pathway to achieve catalyst-free lactone preparation. Analytically, we believe the performance of direct infusion MS can be greatly enhanced by combining our approach with prior sample enrichment steps for applications in biomedicine and food safety. Also, combination with portable mass spectrometers can improve the efficiency of field studies since front-end separation is not possible under such conditions.

Hydroxy fatty acids in the surface Earth system

Lipids are ubiquitous and highly abundant in a wide range of organisms and have been found in various types of environmental media. These molecules play a crucial role as organic tracers by providing a chemical perspective on viewing the material world, as well as offering a wealth of information on metabolic activities. Among the diverse lipid compounds, hydroxy fatty acids (HFAs) with one to multiple hydroxyl groups attached to the carbon chain stand out as important biomarkers for different sources of organic matter. HFAs are widespread in nature and are involved in biotransformation and oxidation processes in living organisms. The unique chemical and physical properties attributed to the hydroxyl group make HFAs ideal biomarkers in biomedicine and environmental toxicology, as well as organic geochemistry. The molecular distribution patterns of HFAs can be unique and diagnostic for a given class of organisms, including animals, plants, and microorganisms. Thus, HFAs can act as a valuable proxy for understanding the ecological relationships between different organisms and their environment. Furthermore, HFAs have numerous industrial applications due to their higher reactivity, viscosity, and solvent miscibility. This review paper integrates the latest research on the sources and chemical analyses of HFAs, as well as their applications in industrial/medicinal production and as biomarkers in environmental studies. This review article also provides insights into the biogeochemical cycles of HFAs in the surface Earth system, highlighting the importance of these compounds in understanding the complex interactions between living organisms and the environment.

Effects of film-forming Pichia and Candida yeasts on cider and wine as post-fermentation contaminants

Film-forming yeasts are potential sources of defects in alcoholic beverages. The aim of this study is to assess the growth capacity of Pichia and Candida film-forming yeasts in cider and wine and the effects on their chemical composition. Cider, partially and fully fermented wine were inoculated with strains of C. californica, P. fermentans, P. kluyveri, P. kudriavzevii, P. manshurica, and P. membranifaciens to simulate a post-fermentative contamination. The former three species grew only in cider. Pichia manshurica and P. kudriavzevii displayed high viability in wine up to 13.18% (v v-1) ethanol. Significant changes in odour-active molecules from different chemical groups were observed in cider and wine in the inoculated samples, compared to the non-inoculated ones. Cider is more susceptible to contamination by all of the species tested, due to its low alcohol content, while P. membranifaciens, P. manshurica, and P. kudriavzevii are additionally potential spoilage agents of wine. This study highlights the risk of cider and wine contamination by film-forming yeasts. Their impact on aroma profiles depends on their ability to grow and their metabolism. This study contributes to an understanding of the possible physiological and metabolic mechanisms responsible for film formation and chemical changes in alcoholic beverages.

Controlled and effective ring-opening (co)polymerization of rac-lactide, ε-caprolactone and ε-decalactone by β-pyrimidyl enolate aluminum complexes

A series of β-pyrimidyl enolate aluminum complexes (1–6) were found to promote controlled and living ROP of rac-LA, ε-CL, and ε-DL. Six well-defined diblock copolymers and the perfect random copolymer poly(l-LA-r-CL) were successfully synthesized.

Generation of intra- and interspecific Saccharomyces hybrids with improved oenological and aromatic properties

Non-wine yeasts could enhance the aroma and organoleptic profile of wines. However, compared to wine strains, they have specific intolerances to winemaking conditions. To solve this problem, we generated intra- and interspecific hybrids using a non-GMO technique (rare-mating) in which non-wine strains of S. uvarum, S. kudriavzevii and S. cerevisiae species were crossed with a wine S. cerevisiae yeast. The hybrid that inherited the wine yeast mitochondrial showed better fermentation capacities, whereas hybrids carrying the non-wine strain mitotype reduced ethanol levels and increased glycerol, 2,3-butanediol and organic acid production. Moreover, all the hybrids produced several fruity and floral aromas compared to the wine yeast: β-phenylethyl acetate, isobutyl acetate, γ-octalactone, ethyl cinnamate in both varietal wines. Sc × Sk crosses produced three- to sixfold higher polyfunctional mercaptans, 4-mercapto-4-methylpentan-2-one (4MMP) and 3-mercaptohexanol (3MH). We proposed that the exceptional 3MH release observed in an S. cerevisiae × S. kudriavzevii hybrid was due to the cleavage of the non-volatile glutathione precursor (Glt-3MH) to detoxify the cell from the presence of methylglyoxal, a compound related to the high glycerol yield reached by this hybrid. In conclusion, hybrid generation allows us to obtain aromatically improved yeasts concerning their wine parent. In addition, they reduced ethanol and increased organic acids yields, which counteracts climate change effect on grapes.

Production of lactones for flavoring and pharmacological purposes from unsaturated lipids: an industrial perspective

The enantiomeric pure and natural (+)-Lactones (C ≤ 14) with aromas obtained from fruits and milk are considered flavoring compounds. The flavoring value is related to the lactones' ring size and chain length, which blend in varying concentrations to produce different stone-fruit flavors. The nature-identical and enantiomeric pure (+)-lactones are only produced through whole-cell biotransformation of yeast. The industrially important γ-decalactone and δ-decalactone are produced by a four-step aerobic-oxidation of ricinoleic acid (RA) following the lactonization mechanism. Recently, metabolic engineering strategies have opened up new possibilities for increasing productivity. Another strategy for increasing yield is to immobilize the RA and remove lactones from the broth regularly. Besides flavor impact, γ-, δ-, ε-, ω-lactones of the carbon chain (C8-C12), the macro-lactones and their derivatives are vital in pharmaceuticals and healthcare. These analogues are isolated from natural sources or commercially produced via biotransformation and chemical synthesis processes for medicinal use or as active pharmaceutical ingredients. The various approaches to biotransformation have been discussed in this review to generate more prospects from a commercial point of view. Finally, this work will be regarded as a magical brick capable of containing both traditional and genetic engineering technology while contributing to a wide range of commercial applications.

Corylus avellana L. Natural Signature: Chiral Recognition of Selected Informative Components in the Volatilome of High-Quality Hazelnuts

The volatile fraction of plant-based foods provides useful functional information concerning sample-related variables such as plant genotype and phenotype expression, pedoclimatic and harvest conditions, transformation/processing technologies, and can be informative about the sensory quality. In this respect, the enantiomeric recognition of the chiral compounds increases the level of information in profiling studies, being the biosynthesis of native compounds often stereo-guided. Chiral native volatiles mostly show an enantiomeric excess that enables origin authentication or support correlation studies between chemical patterns and sensory profiles. This study focuses, for the first time, on the enantiomeric composition of a large set of chiral compounds within the complex volatilome of Corylus avellana L. belonging to different cultivars (Tonda Gentile Romana, Tonda Gentile Trilobata, Anakliuri) and harvested in different geographical areas (Italian and Georgian). Besides native components profiled in raw kernels, volatiles formed after technological treatment (i.e., roasting) are also considered. Headspace solid-phase microextraction combined with enantioselective gas chromatography-mass spectrometry enables the accurate tracking and annotation of about 150 compounds across many samples. The results show that chiral compounds have diagnostic distribution patterns within hazelnut volatilome with cultivar and harvest region playing the major role. Moreover, being some of these chiral molecules also key-aromas, their distribution has a decisive impact on the sensory properties of the product. In particular, the enantiomeric composition of (E)-5-methyl-2-hepten-4-one (filbertone) resulted to be discriminant for origin authentication. The enantiomeric distribution showed, according to literature, an excess of the (S)-enantiomer in both raw and roasted samples volatilome with larger differences in raw samples. The amount of both (R) and (S)-filbertone increases during roasting; the most marked increase for (R)-enantiomer is observed in Italian samples, thus supporting evidence of better hedonic properties and more pleasant odor and aroma.

Biotechnological formation of dairy flavor inducing δ-lactones from vegetable oil

Agroscope Culture Collection was screened to identify bacterial strains effective in production of dairy flavor inducing lactones using grapeseed oil as a substrate. Lentilactobacillus parafarraginis FAM-1079, Lactococcus lactis subsp. lactis FAM-17918, and L. lactis subsp. lactis biovar diacetylactis FAM-22003 showed the most efficient formation of targeted δ-lactones. The application of sublethal heat stress significantly increased target lactone production. The most profound improvement was for L. lactis subsp. lactis biovar diacetylactis where δ-octadecalactone generation was improved by factor of 9. The pre-fermentation step as well as growth phase in which bacteria are harvested did not have a significant impact on lactones yield. The lactone production process from vegetable oil developed in this study offers a new way of developing a natural flavor ingredient for incorporation into plant-based products.

Corylus avellana L. Aroma Blueprint: Potent Odorants Signatures in the Volatilome of High Quality Hazelnuts

The volatilome of hazelnuts (Corylus avellana L.) encrypts information about phenotype expression as a function of cultivar/origin, post-harvest practices, and their impact on primary metabolome, storage conditions and shelf-life, spoilage, and quality deterioration. Moreover, within the bulk of detectable volatiles, just a few of them play a key role in defining distinctive aroma (i.e., aroma blueprint) and conferring characteristic hedonic profile. In particular, in raw hazelnuts, key-odorants as defined by sensomics are: 2,3-diethyl-5-methylpyrazine (musty and nutty); 2-acetyl-1,4,5,6-tetrahydropyridine (caramel); 2-acetyl-1-pyrroline (popcorn-like); 2-acetyl-3,4,5,6-tetrahydropyridine (roasted, caramel); 3-(methylthio)-propanal (cooked potato); 3-(methylthio)propionaldehyde (musty, earthy); 3,7-dimethylocta-1,6-dien-3-ol/linalool (citrus, floral); 3-methyl-4-heptanone (fruity, nutty); and 5-methyl-(E)-2-hepten-4-one (nutty, fruity). Dry-roasting on hazelnut kernels triggers the formation of additional potent odorants, likely contributing to the pleasant aroma of roasted nuts. Whiting the newly formed aromas, 2,3-pentanedione (buttery); 2-propionyl-1-pyrroline (popcorn-like); 3-methylbutanal; (malty); 4-hydroxy-2,5-dimethyl-3(2H)-furanone (caramel); dimethyl trisulfide (sulfurous, cabbage) are worthy to be mentioned. The review focuses on high-quality hazelnuts adopted as premium primary material by the confectionery industry. Information on primary and secondary/specialized metabolites distribution introduces more specialized sections focused on volatilome chemical dimensions and their correlation to cultivar/origin, post-harvest practices and storage, and spoilage phenomena. Sensory-driven studies, based on sensomic principles, provide insights on the aroma blueprint of raw and roasted hazelnuts while robust correlations between non-volatile precursors and key-aroma compounds pose solid foundations to the conceptualization of aroma potential.

Attempt to Develop an Effective Method for the Separation of Gamma-Decalactone from Biotransformation Medium

Gamma-decalactone (GDL) is a fragrance compound obtained in the process of β-oxidation of ricinoleic acid, which is derived from the hydrolysis of castor oil. The biotechnological method of the synthesis of this lactone has been improved for over two decades, but the vast majority of research results have been based only on determining the concentration of the lactone by chromatographic methods without separating it from the biotransformation medium. In this study, we attempted to separate GDL from the medium in which the lactone was synthesized by Yarrowia lipolytica from castor oil. The effectiveness of liquid–liquid extraction, hydrodistillation, and adsorption on the porous materials (zeolite, vermiculite and resin Amberlite XAD-4) was compared. The influence of the solvent on the efficiency of GDL extraction, the influence of the acidity of the medium on the amount of GDL in the distillate, and the level of lactone adsorption on the above-mentioned adsorbents were compared by calculating the initial adsorption rate. The adsorption isotherm was determined for the most effective adsorbent. Among the five solvents tested, the most effective was diethyl ether, used at the ratio of 1:1. The extraction was characterized by higher efficiency than hydrodistillation; the difference in GDL determinations by these two methods ranged from 12.8 to 22%. The purity of the distillates was much higher than that of the extracts at 88.0 ± 3.4% compared to 53.0 ± 1.8%. The acidification of the biotransformation medium increased the concentration of the lactone in both the reaction mixture and the distillate. GDL was most efficiently adsorbed on Amberlite XAD-4 resin, for which the lactone isotherm adsorption was linear. The amount of lactone adsorbed on Amberlite XAD-4 within 1 h was approx. 80% (2.45 g), of which 1.96 g was then desorbed with ethanol. In the context of industrial applications, adsorption of GDL on Amberlite XAD-4 seems to be the most appropriate method due to material costs, the ease of the process, and low environmental burden.

Nonconventional yeasts to produce aroma compounds by using agri-food waste materials

Nowadays, biotechnological applications are emphasized to ensure sustainable development by reutilizing waste materials to prevent ecological problems and to produce or recover compounds that may have positive effects on health. Yeasts are fascinating microorganisms that play a key role in several traditional and innovative processes. Although Saccharomyces is the most important genus of yeasts, and they are major producers of biotechnological products worldwide, a variety of other yeast genera and species than Saccharomyces that are called 'non-Saccharomyces' or 'nonconventional' yeasts also have important potential for use in biotechnological applications. Some of the nonconventional yeast strains offer a unique potential for biotechnological applications to produce valuable secondary metabolites due to their characteristics of surviving and growing in such extreme conditions, e.g. wide substrate range, rapid growth, thermotolerance, etc. In this review, we aimed to summarize potential biotechnological applications of some nonconventional yeasts (Kluyveromyces spp., Yarrowia spp., Pichia spp., Candida spp., etc.) to produce industrially important aroma compounds (phenylethyl alcohol, phenylethyl acetate, isobutyl acetate, diacetyl, etc.) by reutilizing agri-food waste materials in order to prevent ecological problems and to produce or recover compounds that may have positive effects on health.

The Endophytic Strain Trichoderma asperellum 6S-2: An Efficient Biocontrol Agent against Apple Replant Disease in China and a Potential Plant-Growth-Promoting Fungus

A study was conducted for endophytic antagonistic fungi obtained from the roots of healthy apple trees growing in nine replanted orchards in Shandong Province, China. The fungi were assessed for their ability to inhibit Fusarium proliferatum f. sp. malus domestica MR5, a fungal strain associated with apple replant disease (ARD). An effective endophyte, designated as strain 6S-2, was isolated and identified as Trichoderma asperellum. Strain 6S-2 demonstrated protease, amylase, cellulase, and laccase activities, which are important for the parasitic and antagonistic functions of pathogenic fungi. The inhibition rate of 6S-2 against Fusarium proliferatum f. sp. malus domestica MR5 was 52.41%. Strain 6S-2 also secreted iron carriers, auxin, ammonia and was able to solubilize phosphorus. Its fermentation extract and volatile substances inhibited the growth of MR5, causing its hyphae to twist, shrink, swell, and rupture. The antifungal activity of the 6S-2 fermentation extract increased with increasing concentrations. It promoted the production and elongation of Arabidopsis thaliana lateral roots, and the strongest effects were seen at a concentration of 50 mg/mL. A GC-MS analysis of the 6S-2 fermentation extract and volatile substances showed that they comprised mainly alkanes, alcohols, and furanones, as well as the specific volatile substance 6-PP. The application of 6S-2 spore suspension to replanted apple orchard soils reduced plant oxidative damage and promoted plant growth in a pot experiment. Therefore, the endophytic strain T. asperellum 6S-2 has the potential to serve as an effective biocontrol fungus for the prevention of ARD in China, and appears to promote plant growth.

Increased carvone production in Escherichia coli by balancing limonene conversion enzyme expression via targeted quantification concatamer proteome analysis

(−)-Carvone is a monoterpenoid with a spearmint flavor. A sustainable biotechnological production process for (−)-carvone is desirable. Although all enzymes in (−)-carvone biosynthesis have been functionally expressed in Escherichia coli independently, the yield was low in previous studies. When cytochrome P450 limonene-6-hydroxylase (P450)/cytochrome P450 reductase (CPR) and carveol dehydrogenase (CDH) were expressed in a single strain, by-product formation (dihydrocarveol and dihydrocarvone) was detected. We hypothesized that P450 and CDH expression levels differ in E. coli. Thus, two strains independently expressing P450/CPR and CDH were mixed with different ratios, confirming increased carvone production and decreased by-product formation when CDH input was reduced. The optimum ratio of enzyme expression to maximize (−)-carvone production was determined using the proteome analysis quantification concatamer (QconCAT) method. Thereafter, a single strain expressing both P450/CPR and CDH was constructed to imitate the optimum expression ratio. The upgraded strain showed a 15-fold improvement compared to the initial strain, showing a 44 ± 6.3 mg/L (−)-carvone production from 100 mg/L (−)-limonene. Our study showed the usefulness of the QconCAT proteome analysis method for strain development in the industrial biotechnology field.

Microbial Biosynthesis of Lactones: Gaps and Opportunities towards Sustainable Production

Lactones are volatile organic compounds widely present in foods. These chemicals are applied as flavors and fragrances in the food, cosmetics and pharmaceutical industries. Recently, the potential of lactones as green solvents and fuel precursors reinforced their role as platform compounds of future bio-based economies. However, their current mode of production needs to change. Lactones are mainly obtained through chemical synthesis or microbial biotransformation of hydroxy fatty acids. The latter approach is preferred but still needs to use more sustainable substrates. Hydroxy fatty acids are non-abundant and non-sustainable substrates from environmental, health and economic points of view. Therefore, it is urgent to identify and engineer microorganisms with the rare ability to biosynthesize lactones from carbohydrates or renewable lipids. Here, we firstly address the variety and importance of lactones. Then, the current understanding of the biosynthetic pathways involved in lactone biosynthesis is presented, making use of the knowledge acquired in microorganisms and fruits. From there, we present and make the distinction between biotransformation processes and de novo biosynthesis of lactones. Finally, the opportunities and challenges towards more sustainable production in addition to the relevance of two well-known industrial microbes, the filamentous fungus Ashbya gossypii and the yeast Yarrowia lipolytica, are discussed.

Mass spectrometry based metabolomics approach on the elucidation of volatile metabolites formation in fermented foods: A mini review

Metabolomics can be applied for comparative and quantitative analyses of the metabolic changes induced by microorganisms during fermentation. In particular, mass spectrometry (MS) is a powerful tool for metabolomics that is widely used for elucidating biomarkers and patterns of metabolic changes. Fermentation involves the production of volatile metabolites via diverse and complex metabolic pathways by the activities of microbial enzymes. These metabolites can greatly affect the organoleptic properties of fermented foods. This review provides an overview of the MS-based metabolomics techniques applied in studies of fermented foods, and the major metabolic pathways and metabolites (e.g., sugars, amino acids, and fatty acids) derived from their metabolism. In addition, we suggest an efficient tool for understanding the metabolic patterns and for identifying novel markers in fermented foods.

Liamocins biosynthesis, its regulation in Aureobasidium spp., and their bioactivities

Liamocins synthesized by Aureobasidium spp. are glycolipids composed of a single mannitol or arabitol headgroup linked to either three, four or even six 3,5-dihydroxydecanoic ester tail-groups. The highest titer of liamocin achieved was over 40.0 g/L. The substrates for liamocins synthesis include glucose, sucrose, xylose, mannitol, and others. The Pks1 is responsible for the biosynthesis of the tail-group 3,5-dihydroxydecanoic acid, both mannitol dehydrogenase (MDH) and mannitol 1-phosphate 5-dehydrogenase (MPDH) catalyze the mannitol biosynthesis and the arabitol biosynthesis is controlled by arabitol dehydrogenase (ArDH). The ester bond formation between 3,5-dihydroxydecanoic acid and mannitol or arabitol is catalyzed by the esterase (Est1). Liamocin biosynthesis is regulated by the specific transcriptional activator (Gal1), global transcriptional activator (Msn2), various signaling pathways, acetyl-CoA flux while Pks1 activity is controlled by PPTase activity. The synthesized liamocins have high bioactivity against the pathogenic bacteria Streptococcus spp. and some kinds of cancer cells while Massoia lactone released liamocins which exhibited obvious antifungal and anticancer activities. Therefore, liamocins and Massoia lactone have many applications in various sectors of biotechnology.

Microorganisms, the Ultimate Tool for Clean Label Foods?

Clean label is an important trend in the food industry. It aims at washing foods of chemicals perceived as unhealthy by consumers. Microorganisms are present in many foods (usually fermented), they exhibit a diversity of metabolism and some can bring probiotic properties. They are usually well considered by consumers and, with progresses in the knowledge of their physiology and behavior, they can become very precise tools to produce or degrade specific compounds. They are thus an interesting means to obtain clean label foods. In this review, we propose to discuss some current research to use microorganisms to produce clean label foods with examples improving sensorial, textural, health and nutritional properties.

Learning about microbial language: possible interactions mediated by microbial volatile organic compounds (VOCs) and relevance to understanding Malassezia spp. metabolism

BACKGROUND

Microorganisms synthesize and release a large diversity of small molecules like volatile compounds, which allow them to relate and interact with their environment. Volatile organic compounds (VOCs) are carbon-based compounds with low molecular weight and generally, high vapor pressure; because of their nature, they spread easily in the environment. Little is known about the role of VOCs in the interaction processes, and less is known about VOCs produced by Malassezia, a genus of yeasts that belongs to the human skin mycobiota. These yeasts have been associated with several dermatological diseases and currently, they are considered as emerging opportunistic yeasts. Research about secondary metabolites of these yeasts is limited. The pathogenic role and the molecular mechanisms involved in the infection processes of this genus are yet to be clarified. VOCs produced by Malassezia yeasts could play an important function in their metabolism; in addition, they might be involved in either beneficial or pathogenic host-interaction processes. Since these yeasts present differences in their nutritional requirements, like lipids to grow, it is possible that these variations of growth requirements also define differences in the volatile organic compounds produced in Malassezia species.

AIM OF REVIEW

We present a mini review about VOCs produced by microorganisms and Malassezia species, and hypothesize about their role in its metabolism, which would reveal clues about host-pathogen interaction.

KEY SCIENTIFIC CONCEPTS OF REVIEW

Since living organisms inhabit a similar environment, the interaction processes occur naturally; as a result, a signal and a response from participants of these processes become important in understanding several biological behaviors. The efforts to elucidate how living organisms interact has been studied from several perspectives. An important issue is that VOCs released by the microbiota plays a key role in the setup of relationships between living micro and macro organisms. The challenge is to determine what is the role of these VOCs produced by human microbiota in commensal/pathogenic scenarios, and how these allow understanding the species metabolism. Malassezia is part of the human mycobiota, and it is implicated in commensal and pathogenic processes. It is possible that their VOCs are involved in these behavioral changes, but the knowledge about this remains overlocked. For this reason, VOCs produced by microorganisms and Malassezia spp. and their role in several biological processes are the main topic in this review.

Mycosynthesis of novel lactone in foliar endophytic fungus isolated from Bixa orellana L

There is a colossal demand for natural pigments and its applications in recent times. In the study, a novel lactone pigment was isolated from a predominant endophytic fungus residing in Bixa orellana L. (Bixaceae) leaves. The endophyte was identified as Fusarium verticillioides through morphological and molecular investigations. The optimum growth parameters of the endophyte for pigment production were at 33 ºC with pH 6.5 in dark. Through comprehensive spectroscopic studies, the structure of the isolated lactone was resolved and identified as (E)-3, 3-dimethyl-4-(pent-1-en-1-yl)-4-propyldihydrofuran-2(3H)-one. The acute oral toxicity study of the pigment investigated upon female Wistar rats indicated the median lethal dose (LD₅₀) value above 1000 mg/kg body weight affirming safety. Thus, the red pigment from the isolated endophyte may be employed as a sustainable source for natural colorant in industries owing to its non-toxicity.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-020-02566-x.

An effective chromatographic fingerprinting workflow based on comprehensive two-dimensional gas chromatography - Mass spectrometry to establish volatiles patterns discriminative of spoiled hazelnuts (Corylus avellana L.)

The volatile fraction of hazelnuts encrypts information about: cultivar/geographical origin, post-harvest treatments, oxidative stability and sensory quality. However, sensory features could be buried under other dominant chemical signatures posing challenges to an effective classification based on pleasant/unpleasant notes. Here a novel workflow that combines Untargeted and Targeted (UT) fingerprinting on comprehensive two-dimensional gas-chromatographic patterns is developed to discriminate spoiled hazelnuts from those of acceptable quality. By flash-profiling, six hazelnut classes are defined: Mould, Mould-rancid-solvent, Rancid, Rancid-stale, Rancid-solvent, and Uncoded KO. Chromatographic fingerprinting on composite 2D chromatograms from samples belonging to the same class (i.e., composite class-images) enabled effective selection of chemical markers: (a) octanoic acid that guides the sensory classification being positively correlated to mould; (b) ƴ-nonalactone, ƴ-hexalactone, acetone, and 1-nonanol that are decisive to classify OK and rancid samples; (c) heptanoic and hexanoic acids and ƴ-octalactone present in high relative abundance in rancid-solvent and rancid-stale samples.

Biotransformation of 12-hydroxystearic acid to gamma-decalactone: Comparison of two separation systems

Biotransformation of natural products to the natural flavoring, gamma-decalactone (GDL), has attracted considerable attention. However, improving its yield is challenging due to its high feedback inhibition of yeast cells, which lowers the productivity of the biotransformation process. In this study, we compared two in situ separation processes established by adding either resin (HZ-816) or cyclopentasiloxane (DC345) to a biotransformation medium and investigated their efficiency and effect on yeast metabolism. Compared with a control, yields from the medium with HZ-816 and DC345 increased by 140% and 175%, respectively. However, after 84 h of biotransformation, the protein leakage in the medium with HZ-816 and DC345 was respectively 2.04 times and 1.43 times that of the control. Meanwhile, the mortality of yeast cells was 32.8% and 24.0% in the medium with HZ-816 and DC345, respectively, whereas that in the control was 20.1%. Our findings indicate that a cyclase is involved in the final step of the biotransformation. The activity of the yeast cyclase in the DC345 system was 3.33 times greater than that in the HZ-816 system. The DC345 system was superior to the HZ-816 resin system in this separation process because its yield was 30.8% greater and it had less cellular damage. Thus, we showed that the DC345 system has potential as a new separation system for the production of GDL by biotransformation.

Identification and Quantitation of Hydroxy Fatty Acids in Fermented Sausage Samples

The quality of fermented sausage is strongly influenced by its fatty acid (FA). However, the role of a defined starter culture in modifying sausage FA composition, and especially in the production of hydroxy FAs (HFAs), has not been determined. In this study, the FA compositions of sausages fermented with Latilactobacillus sakei, with L. sakei plus Staphylococcus carnosus, and with an aseptic control were characterized by liquid chromatography-mass spectrometry (MS)/MS and gas chromatography-MS. The sausages fermented with L. sakei, and with L. sakei plus S. carnosus, showed a reduced accumulation of poly and/or diunsaturated FAs and distinct composition of HFAs compared to the aseptic control. 2-HFAs were enriched via high-speed counter-current chromatography and identified uniquely in the L. sakei plus S. carnosus fermented sausage. Through lipid analyses, this study illustrated how the choice of a defined starter culture affected the observed FA metabolism in fermented sausages, facilitating the development of starter cultures or additives that impart desirable characteristics to sausage.

Production of a Distilled Spirit Using Cassava Flour as Raw Material: Chemical Characterization and Sensory Profile

Cassava plays a key role in the food production and economies of several countries worldwide. Due to its starch content, alcoholic fermentation is a promising transformation process for adding value to cassava. However, most of the existing cassava beverages are from traditional origin, with the yields and quality often poorly known or controlled due to the use of artisanal production processes. This work aims at the application of easily implementable biotechnological tools for the production of cassava spirits, in order to add value to this raw material. Cassava flour was liquefied and saccharified using enzymatic cocktails, generating a fermentable broth with ~184 g L⁻¹ of fermentable sugars. This was then fermented into an alcoholic product with ~10% ethanol by volume and distilled for spirit production. Cassava spirits with 40% ethanol by volume, with or without application of oak wood, were produced. For further valorization, volatile fractions of cassava spirits were characterized by gas chromatography–flame ionization detection (GC-FID) and GC–MS. These showed a predominance of yeast fermentation metabolites, complemented by wood extractives where oak chips were applied. Both produced spirits showed desirable sensory traits, receiving good acceptance by experienced tasters, demonstrating the feasibility of the proposed process to add value to cassava surplus.

Bacterial Biotransformation of Oleic Acid: New Findings on the Formation of γ-Dodecalactone and 10-Ketostearic Acid in the Culture of Micrococcus luteus

Microbial conversion of oleic acid (1) to form value-added industrial products has gained increasing scientific and economic interest. So far, the production of natural lactones with flavor and fragrance properties from fatty acids by non-genetically modified organisms (non-GMO) involves whole cells of bacteria catalyzing the hydration of unsaturated fatty acids as well as yeast strains responsible for further β-oxidation processes. Development of a non-GMO process, involving a sole strain possessing both enzymatic activities, significantly lowers the costs of the process and constitutes a better method from the customers' point of view regarding biosafety issues. Twenty bacteria from the genus of Bacillus, Comamonas, Dietzia, Gordonia, Micrococcus, Pseudomonas, Rhodococcus and Streptomyces were screened for oxidative functionalization of oleic acid (1). Micrococcus luteus PCM525 was selected as the sole strain catalyzing the one-pot transformation of oleic acid (1) into natural valuable peach and strawberry-flavored γ-dodecalactone (6) used in the food, beverage, cosmetics and pharmaceutical industries. Based on the identified products formed during the process of biotransformation, we clearly established a pathway showing that oleic acid (1) is hydrated to 10-hydroxystearic acid (2), then oxidized to 10-ketostearic acid (3), giving 4-ketolauric acid (4) after three cycles of β-oxidation, which is subsequently reduced and cyclized to γ-dodecalactone (6) (Scheme 1). Moreover, three other strains (Rhodococcus erythropolis DSM44534, Rhodococcus ruber PCM2166, Dietzia sp. DSM44016), with high concomitant activities of oleate hydratase and alcohol dehydrogenase, were identified as efficient producers of 10-ketostearic acid (3), which can be used in lubricant and detergent formulations. Considering the prevalence of γ-dodecalactone (6) and 10-ketostearic acid (3) applications and the economic benefits of sustainable management, microbial bioconversion of oleic acid (1) is an undeniably attractive approach.

Structure-function relationships of antifungal monohydroxy unsaturated fatty acids (HUFA) of plant and bacterial origin

This study investigated the relationships between the structures of hydroxy unsaturated fatty acids (HUFA) and their antifungal activities. Structurally diverse HUFA, including four monohydroxy-18:1 isomers, two monohydroxy 18:2 isomers and two monohydroxy 18:2 isomers were extracted from seeds of plants (Coriaria nepalensis, Thymus vulgaris, Mallotus philippensis and Dimorphotheca sinuata) for which information was available on PlantFAdb database, and from culture supernatants of lactobacilli. They were purified by high-speed counter current chromatography (HSCCC) and identified by LC-MS/MS. The minimum inhibitory concentrations of HUFA were tested against a panel of five yeasts and five mycelial fungi. The membrane phase changes under HUFA treatment and the content of ergosterol were both measured to differentiate HUFA-sensitive and HUFA-resistant fungi. HUFA with a hydroxyl group near the center of the 18-carbon fatty acid chains were found to contribute strongly to HUFA antifungal activity. Antifungal HUFA targeted filamentous fungi but not yeasts. HUFA didn't alter the overall membrane fluidity of sensitive fungi, but the most HUFA-sensitive fungi had a lower average ergosterol content compared to the resistant yeasts. This indicates the possible interaction of HUFA with fungal membrane with low sterol content, which partially support the previous proposed mode of action. Findings here provide insight on further development of HUFA application in food products.

Switchable Catalysis Improves the Properties of CO2-Derived Polymers: Poly(cyclohexene carbonate-b-ε-decalactone-b-cyclohexene carbonate) Adhesives, Elastomers, and Toughened Plastics

Carbon dioxide/epoxide copolymerization is an efficient way to add value to waste CO2 and to reduce pollution in polymer manufacturing. Using this process to make low molar mass polycarbonate polyols is a commercially relevant route to new thermosets and polyurethanes. In contrast, high molar mass polycarbonates, produced from CO2, generally under-deliver in terms of properties, and one of the most widely investigated, poly(cyclohexene carbonate), is limited by its low elongation at break and high brittleness. Here, a new catalytic polymerization process is reported that selectively and efficiently yields degradable ABA-block polymers, incorporating 6-23 wt % CO2. The polymers are synthesized using a new, highly active organometallic heterodinuclear Zn(II)/Mg(II) catalyst applied in a one-pot procedure together with biobased ε-decalactone, cyclohexene oxide, and carbon dioxide to make a series of poly(cyclohexene carbonate-b-decalactone-b-cyclohexene carbonate) [PCHC-PDL-PCHC]. The process is highly selective (CO2 selectivity >99% of theoretical value), allows for high monomer conversions (>90%), and yields polymers with predictable compositions, molar mass (from 38-71 kg mol-1), and forms dihydroxyl telechelic chains. These new materials improve upon the properties of poly(cyclohexene carbonate) and, specifically, they show good thermal stability (Td,5 ∼ 280 °C), high toughness (112 MJ m-3), and very high elongation at break (>900%). Materials properties are improved by precisely controlling both the quantity and location of carbon dioxide in the polymer chain. Preliminary studies show that polymers are stable in aqueous environments at room temperature over months, but they are rapidly degraded upon gentle heating in an acidic environment (60 °C, toluene, p-toluene sulfonic acid). The process is likely generally applicable to many other lactones, lactides, anhydrides, epoxides, and heterocumulenes and sets the scene for a host of new applications for CO2-derived polymers.

Organocatalyzed ring opening polymerization of regio-isomeric lactones: reactivity and thermodynamics considerations

Study of the kinetics and thermodynamics of the organocatalyzed ring opening polymerization of a regio-isomeric mixture of β,δ-trimethyl-ε-caprolactones (TMCL).

Turning natural δ-lactones to thermodynamically stable polymers with triggered recyclability

Extending the use of natural δ-lactones in circular materials via a synthetic strategy yielding thermodynamically stable polyesters with triggered recyclability.

Distinctive Formation of Volatile Compounds in Fermented Rice Inoculated by Different Molds, Yeasts, and Lactic Acid Bacteria

Rice has been fermented to enhance its application in some foods. Although various microbes are involved in rice fermentation, their roles in the formation of volatile compounds, which are important to the characteristics of fermented rice, are not clear. In this study, diverse approaches, such as partial least squares-discriminant analysis (PLS-DA), metabolic pathway-based volatile compound formations, and correlation analysis between volatile compounds and microbes were applied to compare metabolic characteristics according to each microbe and determine microbe-specific metabolites in fermented rice inoculated by molds, yeasts, and lactic acid bacteria. Metabolic changes were relatively more activated in fermented rice inoculated by molds compared to other microbes. Volatile compound profiles were significantly changed depending on each microbe as well as the group of microbes. Regarding some metabolic pathways, such as carbohydrates, amino acids, and fatty acids, it could be observed that certain formation pathways of volatile compounds were closely linked with the type of microbes. Also, some volatile compounds were strongly correlated to specific microbes; for example, branched-chain volatiles were closely link to Aspergillus oryzae, while Lactobacillus plantarum had strong relationship with acetic acid in fermented rice. This study can provide an insight into the effects of fermentative microbes on the formation of volatile compounds in rice fermentation.