Design and preparation of quantum dots fluorescent probes for in situ identification of Microthrix parvicella in bulking sludge

Effects of silica fume powder modified by oleic acid on the settleability of bulking sludge

Modified silica fume powder with oleic acid through coupling agent was prepared based on the in situ utilizing long-chain fatty acids (LCFA) properties of Microthrix parvicella (M. parvicella) in the activated sludge system. The modification was confirmed by XRD and infrared spectrum. The contact angle analysis showed that the modification gave the silica fume powder a hydrophobic surface. The modified silica fume powder had a good combination with M. parvicella from the SEM and Gram staining measurements. The addition of modified silica powder has a certain effect on the settling capacity of sludge, but has little effect on the sludge treatment capacity, while the SVI dropped from 400.1 to 100.0 mL/g. These suggested that the modified silica fume powder could be used as an excellent weight-increasing agent to inhibit sludge bulking.

A novel dicationic Quinoline-Carzole fluorescent probe: preparation and labelling of Microthrix parvicella

A novel dicationic Quinoline-Carbazole fluorescent probe with hydrophobic long-chain alkane was designed and synthesized based on the property of Microthrix parvicella (M. parvicella) in situ utilizing long-chain fatty acids (LCFA) in the activated sludge system. ¹H NMR spectrum, ultraviolet-visible (UV-Vis) absorption spectra, and fluorescent spectra analysis demonstrated that the probe was successfully obtained. The probe had a large stokes-shift ranging from 102 to 144 nm in different solvents, which were benefit for the fluorescent labelling properties. The labelling experiment indicated that the prepared probe could absorb onto the surface of M. parvicella through hydrophobic bond. Much stronger yellow fluorescence of M. parvicella was observed at the concentration of 1.0 × 10^-5mol/L when compared with the zooglea, which makes it easy to distinguish M. parvicella from the zooglea. In addition, the photostability of the probe was also investigated, and the result showed that the probe was quite stable in a long period of time. All the results indicated that the prepared probe was suitable for the labelling of M. parvicella.

Green synthesis of multipurpose carbon quantum dots from red cabbage and estimation of their antioxidant potential and bio-labeling activity

We present a green synthesis of fluorescent carbon quantum dots (CQDs) by using red cabbage (rc) and a one-step hydrothermal approach. The rcCQDs were characterized by various techniques such as UV-visible spectroscopy, transmission electron microscopy (TEM), high-resolution TEM, Fourier-transform infrared spectroscopy, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy. The synthesized rcCQDs exhibited an average size of 3 nm, measured by TEM, blue fluorescence, and a quantum yield of 8.3%. The highest emission band was observed at approximately 402 nm when excited at 330 nm. The rcCQDs exhibited strong antioxidant activities by scavenging 61, 56, and 91% against 2, 2-diphenyl-1-picrylhydrazyl, hydroxyl, and potassium permanganate radicals, respectively. The scavenging activity of rcCQDs was comparable with that of standard antioxidant L-ascorbic acid. Cell Counting Kit (CCK)-8 assay depicted superior bio-compatibility and negligible cytotoxicity of rcCQDs on SH-SY5Y neuroblastoma cells. They were used as a fluorescent probe for bio-labeling of Escherichia coli and Staphylococcus aureus. The viabilities of the labeled bacterial cells were analyzed by AFM and UV-visible spectroscopy. Furthermore, the rcCQDs were utilized as a fluorescent ink, an alternative to pens, and maybe suitable for paints and varnish agents. This study provides detailed mechanistic insights into the antioxidant activity of as-synthesized rcCQDs, which suggest the practical applicability of CQDs for bio-medical applications. Key points • Carbon quantum dots were prepared from red cabbage using the hydrothermal method. • The scavenging activity of rcCQDs was evaluated for DPPH, OH, and KMnO₄radicals. • The rcCQDs were used for the labeling of foodborne bacteria. • The rcCQDs could be utilized as fluorescent ink. Graphical abstract Schematic representation of CQDs prepared from red cabbage (rc) with multifunctional applications.

Labeling of Microthrix parvicella in situ: A novel FRET probe based on bisoctyl rhodamine B

Filamentous bacteria, particularly Microthrix parvicella, are mainly responsible for bulking or foaming of activated sludge. Based on the affinity of M. parvicella to the hydrophobic characteristics of long-chain fatty acids, a novel bisoctyl rhodamine B (BORB) and a novel fluorescence resonance energy transfer (FRET) complex probe were prepared herein to study their properties. When the FRET probe was used in in situ activated sludge, M. parvicella was clearly labeled at 20 nmol/L, which was a reduction of 50 times compared to that of the BORB (1 μmol/L) alone and 500 times compared to the carbazole-quinoline probe reported previously. Compared with fluorescence in situ hybridization, M. parvicella could be clearly labeled using BORB and the FRET probe in situ without requiring complicated pretreatments (i.e., shock and broken process, fixed sample, digestion, and lysozyme treatment). This study discusses the facile approach developed for labeling M. parvicella in early warning expansion, thereby inhibiting and controlling sludge bulking in situ.

A novel fluorescent long-chain fatty acid-substituted dye: labeling and biodegrading of Microthrix parvicella

Microthrix parvicella (M. parvicella) is a filamentous bacterium that induces bulking in activated sludge. Here, we used the affinity of long-chain fatty acids (LCFA) for M. parvicella to create a novel fluorescent probe of carbazole modified by LCFA. The structure was characterized by ¹H NMR spectroscopy and mass spectrometry. The spectral properties, photostability, and hydrophobic properties of the probe were also characterized. Fluorescent-labeling results showed that it can label M. parvicella in situ and could be biodegraded via metabolism. The stable docking mode of carbazole probes with different fatty acid chains and lipases was also docked by the density functional tight-binding (DFTB) method.

M. parvicella in situ could be biodegraded by a novel fluorescent probe of carbazole modified by LCFA(FP1).

Antimicrobial and Antioxidant Activity of the Biologically Synthesized Tellurium Nanorods; A Preliminary In vitro Study

Background: Recent theranostic (therapeutic or diagnostic) applications of tellurium nanoparticles have attracted a great interest for development of different methods for synthesis of this valuable nanostructure, especially via biological resources. Objectives: In the present study, the antimicrobial and antioxidant effects of the tellurium nanorods (Te NRs) biosynthesized by a bacterial strain Pseudomonas pseudoalcaligenes strain Te were evaluated. Materials and Methods: The antimicrobial effect of Te NRs and potassium tellurite against different bacterial and fungal pathogens was assessed by microdilution method. Furthermore, the disk diffusion method was used to evaluate the antibacterial effect of the biogenic Te NRs and potassium tellurite against methicillin-resistant Staphylococcus aureus, alone or in combination with various antibiotics. Also, the biogenic Te NRs were investigated for antioxidant activity using 2, 2-diphenyl- 1-picrylhydrazyl (DPPH) scavenging activity and reducing power assay. Results: Transmission electron micrograph (TEM) of the purified Te NRs showed individual and rod-shaped nanostructure (~22 nm diameter by 185 nm in length). Based on the data obtained from both microdilution and disk diffusion method the K₂ TeO₃ exhibited a higher antibacterial and antifungal activity compared to the Te NRs. The measured IC₅₀ for the biogenic Te NRs (i.e. DPPH radical scavenging activity) was found to be 24.9 μg.mL^-1, while, K ₂ TeO₃ has represented only 17.6 ± 0.8 % DPPH radical scavenging effect at the concentration of 160 μg.mL^-1. The reducing power assay revealed a higher electron-donating activity for Te NRs compared to K₂TeO₃. Conclusions: Based on the data obtained from both microdilution and disk diffusion method the K₂TeO₃ exhibited a higher antimicrobial and antifungal activity than Te NRs. Te NRs didn't show the antibacterial effect against the tested bacterial strain: MRSA and showed an inhibitory effect and antibacterial activity of the effective antibiotics. However, more studies should be performed to explore the action mechanism of the produced biogenic Te NRs.

Design Mechanism and Property of the Novel Fluorescent Probes for the Identification of Microthrix Parvicella In Situ

In this study, two novel fluorescent probes, probe A and probe B were designed, synthesized and characterized, based on Microthrix parvicella (M. parvicella) preferring to utilize long-chain fatty acid (LCFA), for the labeling of M. parvicella in activated sludge. The molecular structure of probe A and probe B include long-chain alkane and LCFA, respectively. The results indicated that probe A and probe B had a large stokes shift of 118 nm and 120 nm and high quantum yield of 0.1043 and 0.1058, respectively, which were significantly helpful for the fluorescent labeling. As probe A was more stable than probe B in activated sludge, and the fluorescence intensity keep stable during 24 h, probe A was more suitable for labeling M. parvicella in situ. In addition, through the Image Pro Plus 6 (IPP 6) analysis, a quantitative relationship was established between sludge volume index (SVI) and integral optical density (IOD) of the labeled M. parvicella in activated sludge samples. The relationship between IOD and SVI conforms to Logistic curve (R² = 0.94).