The research of aptamer biosensor technologies for detection of microorganism

Disposable electrochemical biosensors for the detection of bacteria in the light of antimicrobial resistance

Persistent and inappropriate use of antibiotics is causing rife antimicrobial resistance (AMR) worldwide. Common bacterial infections are thus becoming increasingly difficult to treat without the use of last resort antibiotics. This has necessitated a situation where it is imperative to confirm the infection to be bacterial, before treating it with antimicrobial speculatively. Conventional methods of bacteria detection are either culture based which take anywhere between 24 and 96 hor require sophisticated molecular analysis equipment with libraries and trained operators. These are difficult propositions for resource limited community healthcare setups of developing or less developed countries. Customized, inexpensive, point-of-care (PoC) biosensors are thus being researched and developed for rapid detection of bacterial pathogens. The development and optimization of disposable sensor substrates is the first and crucial step in development of such PoC systems. The substrates should facilitate easy charge transfer, a high surface to volume ratio, be tailorable by the various bio-conjugation chemistries, preserve the integrity of the biorecognition element, yet be inexpensive. Such sensor substrates thus need to be thoroughly investigated. Further, if such systems were made disposable, they would attain immunity to biofouling. This article discusses a few potential disposable electrochemical sensor substrates deployed for detection of bacteria for environmental and healthcare applications. The technologies have significant potential in helping reduce bacterial infections and checking AMR. This could help save lives of people succumbing to bacterial infections, as well as improve the overall quality of lives of people in low- and middle-income countries.

Functionalized sampling swabs array-based portable ATP bioluminescence sensor with on-site enrichment and high specificity for live Salmonella detection

Live food-borne pathogens, featured with rapid proliferative capacity and high pathogenicity, pose an emerging food safety and public health crisis. The high-sensitivity detection of pathogens is particularly imperative yet remains challenging. This work developed a functionalized nylon swab array with enhanced affinity for Salmonella typhimurium (S.T.) for high-specificity ATP bioluminescence-based S.T. detection. In brief, the nylon swabs (NyS) were turned to N-methylation nylon (NyS-OH) by reacting with formaldehyde, and NyS-OH were further converted to NyS-CA by reacting with carboxylic groups of citric acid (CA) and EDC/NHS solution, for altering the NyS surface energy to favor biomodification. The antibody-immobilized nylon swab (MNyS-Ab) was ready for S.T.-specific adsorption. Three prepared MNyS-Ab were installed on a stirrer to form an MNyS-Ab array, allowing for on-site enrichment of S.T. through absorptive extraction. The enriched S.T. was quantified by measuring the bioluminescence of ATP released from cell lysis utilizing a portable ATP bioluminescence sensor. The bioassay demonstrated a detectable range of 102-107 CFU mL-1 with a detection limit (LOD) of 8 CFU/mL within 35 min. The signal of single MNyS-Ab swabs was 500 times stronger than the direct detection of 106 CFU/mL S.T. The MNyS-Ab array exhibited a 100-fold increase in extraction level compared to a single MNyS. This combination of a portable bioluminescent sensor and modified nylon swab array offers a novel strategy for point-of-care testing of live S.T. strains. It holds promise for high-sensitivity measurements of other pathogens and viruses.

Recent Advances in Aptamer-Based Biosensors for Bacterial Detection

The rapid and sensitive detection of pathogenic bacteria is becoming increasingly important for the timely prevention of contamination and the treatment of infections. Biosensors based on nucleic acid aptamers, integrated with optical, electrochemical, and mass-sensitive analytical techniques, have garnered intense interest because of their versatility, cost-efficiency, and ability to exhibit high affinity and specificity in binding bacterial biomarkers, toxins, and whole cells. This review highlights the development of aptamers, their structural characterization, and the chemical modifications enabling optimized recognition properties and enhanced stability in complex biological matrices. Furthermore, recent examples of aptasensors for the detection of bacterial cells, biomarkers, and toxins are discussed. Finally, we explore the barriers to and discuss perspectives on the application of aptamer-based bacterial detection.

Photocatalytic antibacterial agents based on inorganic semiconductor nanomaterials: a review

Microbial contamination and antibiotic pollution have threatened public health and it is important to develop a rapid and safe sterilization strategy. Among various disinfection strategies, photocatalytic antibacterial methods have drawn increasing attention due to their efficient disinfection performances and environment-friendly properties. Although there are some reviews about bacterial disinfection, specific reviews on photocatalysis focused on inorganic semiconductor nanomaterials are rarely reported. Herein, we present a systematic summary of recent disinfection developments based on inorganic nanomaterials (including metal oxides, sulfides, phosphides, carbon materials, and corresponding heterostructures) over the past five years. Moreover, key factors and challenges for inorganic nanomaterial-based photocatalytic disinfection are outlined, which holds great potential for future photocatalytic antibacterial applications.

Genosensor on-chip paper for point of care detection: A review of biomedical analysis and food safety application

Over the last decade, paper-based biosensing has attracted considerable attention in numerous fields due to several advantages of them. To elaborate, using paper as a substrate of sensing approaches can be considered an affordable sensing approach owing to low cost of paper, and alongside that, the ability to operate without requiring external equipment. In many cases, cost-effective fabrication techniques such as screen printed and drop casting can be supposed as other benefits of these platforms. Despite the portability and affordability of paper-based assay, two important limitations including sensitivity and selectivity can decrease the application of these sensing approaches. Initially, decoration of paper substrate with nanomaterials (NMs) can improve the properties of paper due to high surface area and conductivity of them. Secondly, the presence of bioreceptors can provide a selective detection platform. Among different bioreceptors, deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) can play a significant role. From this perspective, paper-based biosensors can be used for the detection of various gens which related to biomedical or food safety. In this review, we attempted to summarize recent trends and applications of paper-based genosensor, along with critical arguments in terms of NMs role in signal amplification. Furthermore, the lack of paper-based genosensors in field the of biomedical and food safety will be discussed in the following.

New insights into the roles of fungi and bacteria in the development of medicinal plant

BACKGROUND

The interaction between microorganisms and medicinal plants is a popular topic. Previous studies consistently reported that microorganisms were mainly considered pathogens or contaminants. However, with the development of microbial detection technology, it has been demonstrated that fungi and bacteria affect beneficially the medicinal plant production chain.

AIM OF REVIEW

Microorganisms greatly affect medicinal plants, with microbial biosynthesis a high regarded topic in medicinal plant-microbial interactions. However, it lacks a systematic review discussing this relationship. Current microbial detection technologies also have certain advantages and disadvantages, it is essential to compare the characteristics of various technologies.

KEY SCIENTIFIC CONCEPTS OF REVIEW

This review first illustrates the role of fungi and bacteria in various medicinal plant production procedures, discusses the development of microbial detection and identification technologies in recent years, and concludes with microbial biosynthesis of natural products. The relationship between fungi, bacteria, and medicinal plants is discussed comprehensively. We also propose a future research model and direction for further studies.

Aptamer-Based Point-of-Care Devices: Emerging Technologies and Integration of Computational Methods

Recent innovations in point-of-care (POC) diagnostic technologies have paved a critical road for the improved application of biomedicine through the deployment of accurate and affordable programs into resource-scarce settings. The utilization of antibodies as a bio-recognition element in POC devices is currently limited due to obstacles associated with cost and production, impeding its widespread adoption. One promising alternative, on the other hand, is aptamer integration, i.e., short sequences of single-stranded DNA and RNA structures. The advantageous properties of these molecules are as follows: small molecular size, amenability to chemical modification, low- or nonimmunogenic characteristics, and their reproducibility within a short generation time. The utilization of these aforementioned features is critical in developing sensitive and portable POC systems. Furthermore, the deficiencies related to past experimental efforts to improve biosensor schematics, including the design of biorecognition elements, can be tackled with the integration of computational tools. These complementary tools enable the prediction of the reliability and functionality of the molecular structure of aptamers. In this review, we have overviewed the usage of aptamers in the development of novel and portable POC devices, in addition to highlighting the insights that simulations and other computational methods can provide into the use of aptamer modeling for POC integration.

An ultrasensitive electrochemical aptasensor using Tyramide-assisted enzyme multiplication for the detection of Staphylococcus aureus

In this study, we aimed to introduce a new electrochemical aptasensor based on the tyramide signal amplification (TSA) technology for a highly-sensitive detection of the pathogenic bacterium, Staphylococcus aureus, as a model of foodborne pathogens. In this aptasensor, the primary aptamer, SA37, was used to specifically capture bacterial cells; the secondary aptamer, SA81@HRP, was used as the catalytic probe; and a TSA-based signal enhancement system comprising of biotinyl-tyramide and streptavidin-HRP as electrocatalytic signal tags was adopted to fabricate the sensor and improve the detection sensitivity. S. aureus cells were selected as the pathogenic bacteria to verify the analytical performance of this TSA-based signal-enhancement electrochemical aptasensor platform. After the simultaneous binding of SA37-S. aureus-SA81@HRP formed on the gold electrode, thousands of @HRP molecules could be bound onto the biotynyl tyramide (TB) displayed on the bacterial cell surface through a catalytic reaction between HRP and H₂O₂, resulting in the generation of the highly amplified signals mediated by HRP reactions. This developed aptasensor could detect S. aureus bacterial cells at an ultra-low concentration, with a limit of detection (LOD) of 3 CFU/mL in buffer. Furthermore, this chronoamperometry aptasensor successfully detected target cells in both tap water and beef broth with LOD to be 8 CFU/mL, which are very high sensitivity and specificity. Overall, this electrochemical aptasensor using TSA-based signal-enhancement could be a very useful tool for the ultrasensitive detection of foodborne pathogens in food and water safety and environmental monitoring.

Rapid and sensitive immunoassay for alpha-fetoprotein in serum by fabricating primary antibody-enzyme complexes using protein self-assembly

Primary antibody-enzyme complexes (PAECs) are ideal immunosensing elements that simplify the immunoassay process and improve the uniformity of results due to their ability to both recognize antigens and catalyze substrates. However, the conventional fabrication methods of PAECs, such as direct gene fusion expression, chemical conjugation, enzymatic conjugation, etc., have low efficiency, poor reliability, and other defects, which limit the widespread application of PAECs. Therefore, we developed a convenient method for the fabrication of homogeneous multivalent PAECs using protein self-assembly and validated it using anti-alpha-fetoprotein nanobody (A1) and alkaline phosphatase (ALP) as models. Heptavalent PAECs showed a 4-fold enhancement in enzymatic catalytic activity compared to monovalent PAECs. Further, to verify the application of developed heptavalent PAECs in immunoassay, heptavalent PAECs were used as bifunctional probes to construct a double-antibody sandwich ELISA to detect AFP. The detection limit of the developed heptavalent PAEC-based ELISA is 0.69 ng mL^-1, which is about 3 times higher than that of monovalent PAECs, and the whole detection process can be completed within 3 hours. In short, the proposed protein self-assembling method is a promising technology for developing high-performance heptavalent PACEs, which can simplify the detection process and improve detection sensitivity in various immunoassays.

A Novel Fluorescent Aptasensor for Arsenic(III) Detection Based on a Triple-Helix Molecular Switch

A novel aptamer-based fluorescent-sensing platform with a triple-helix molecular switch (THMS) was proposed as a switch for detecting the arsenic(III) ion. The triple helix structure was prepared by binding a signal transduction probe and arsenic aptamer. Additionally, the signal transduction probe labeled with fluorophore (FAM) and quencher (BHQ1) was employed as a signal indicator. The proposed aptasensor is rapid, simple and sensitive, with a limit of detection of 69.95 nM. The decrease in peak fluorescence intensity shows a linear dependence, with the concentration of As(III) in the range of 0.1 µM to 2.5 µM. The whole detection process takes 30 min. Moreover, the THMS-based aptasensor was also successfully used to detect As(III) in a real sample of Huangpu River water with good recoveries. The aptamer-based THMS also presents distinct advantages in stability and selectivity. The proposed strategy developed herein can be extensively applied in the field of food inspection.

Bibliometrics Analysis of Research Progress of Electrochemical Detection of Tetracycline Antibiotics

Tetracycline is a broad-spectrum class of antibiotics. The use of excessive doses of tetracycline antibiotics can result in their residues in food, posing varying degrees of risk to human health. Therefore, the establishment of a rapid and sensitive field detection method for tetracycline residues is of great practical importance to improve the safety of food-derived animal foods. Electrochemical analysis techniques are widely used in the field of pollutant detection because of the simple detection principle, easy operation of the instrument, and low cost of analysis. In this review, we summarize the electrochemical detection of tetracycline antibiotics by bibliometrics. Unlike the previously published reviews, this article reviews and analyzes the development of this topic. The contributions of different countries and different institutions were analyzed. Keyword analysis was used to explain the development of different research directions. The results of the analysis revealed that developments and innovations in materials science can enhance the performance of electrochemical detection of tetracycline antibiotics. Among them, gold nanoparticles and carbon nanotubes are the most used nanomaterials. Aptamer sensing strategies are the most favored methodologies in electrochemical detection of tetracycline antibiotics.

Highly-Sensitive, Label-Free Detection of Microorganisms and Viruses via Interferometric Reflectance Imaging Sensor

Pathogenic microorganisms and viruses can easily transfer from one host to another and cause disease in humans. The determination of these pathogens in a time- and cost-effective way is an extreme challenge for researchers. Rapid and label-free detection of pathogenic microorganisms and viruses is critical in ensuring rapid and appropriate treatment. Sensor technologies have shown considerable advancements in viral diagnostics, demonstrating their great potential for being fast and sensitive detection platforms. In this review, we present a summary of the use of an interferometric reflectance imaging sensor (IRIS) for the detection of microorganisms. We highlight low magnification modality of IRIS as an ensemble biomolecular mass measurement technique and high magnification modality for the digital detection of individual nanoparticles and viruses. We discuss the two different modalities of IRIS and their applications in the sensitive detection of microorganisms and viruses.

A combined UV-visible with fluorescence detection method based on an unlabeled aptamer and AuNPs for the sensitive detection of acetamiprid

A simple spectral method with a wider detection range is proposed for the detection of acetamiprid.

Advances in Aptamer-Based Biosensors and Cell-Internalizing SELEX Technology for Diagnostic and Therapeutic Application

Aptamers are a group of synthetic single-stranded nucleic acids. They are generated from a random library of single-stranded DNA or RNA by a technology named systematic evolution of ligands by exponential enrichment (SELEX). SELEX is a repetitive process to select and identify suitable aptamers that show high affinity and specificity towards target cells. Great strides have been achieved in the design, construction, and use of aptamers up to this point. However, only a small number of aptamer-based applications have achieved widespread commercial and clinical acceptance. Additionally, finding more effective ways to acquire aptamers with high affinity remains a challenge. Therefore, it is crucial to thoroughly examine the existing dearth and advancement in aptamer-related technologies. This review focuses on aptamers that are generated by SELEX to detect pathogenic microorganisms and mammalian cells, as well as in cell-internalizing SELEX for diagnostic and therapeutic purposes. The development of novel aptamer-based biosensors using optical and electrical methods for microbial detection is reported. The applications and limitations of aptamers are also discussed.

Effect of Risk-Focused Diversified Safety Management Mode in Patients with Major Artery Stent Implantation

Background

Intracranial atherosclerotic stenosis (ICAS) causes a series of neurological symptoms, such as vertigo, impaired consciousness, limb weakness, ataxia, dysphagia, ocular motility disorders, and visual impairment. With the improvement of people's living standards, there are higher requirements for nursing care. Nursing, as an indispensable part of medical care, is closely related to achieving the goal of patient's safety and the overall quality of nurses, quality of care, and nursing management methods.

Objective

To explore the effect of risk-centered diversified safety management in patients undergoing aortic stenting.

Methods

Eighty patients with cerebral infarction were selected and treated with percutaneous transluminal angioplasty and stent implantation (PTAS). Then they were divided into a control group (40 cases) with routine monitoring and an experimental group (40 cases) with risk-focused intervention of a diversified safety management model according to the mode of care. Patient satisfaction and blood index test results were compared after the intervention.

Results

Patients in the experimental group had 6 falls, 3 bed falls, 3 phlebitis, 4 tube slips, and 10 deep vein thrombosis, all significantly fewer than those in the control group. Thirty-eight patients in the experimental group expressed satisfaction with safe management, which was substantially better than the control group (P < 0.05). The levels of tissue plasminogen activator (tPA), plasminogen activator inhibitor-1 (PA1-1), and von Willebrand factor (vWF) in the experimental group were (13.5 ± 1.3) ng/mL, (60.1 ± 9.9) ng/mL, and (2.1 ± 0.2), respectively, which were substantially lower than those in the control group ((14.6 ± 2.4) ng/mL, (64.2 ± 10.7) ng/mL, and (2.8 ± 0.3)), respectively (P < 0.05).

Conclusion

The risk-centered diversified safety management model can effectively reduce the probability of adverse events in patients, improve patient satisfaction with nursing services, and promote faster postoperative recovery, which has clinical application value.

A Polyclonal Selex Aptamer Library Directly Allows Specific Labelling of the Human Gut Bacterium Blautia producta without Isolating Individual Aptamers

Recent studies have demonstrated that changes in the abundance of the intestinal bacterium Blautia producta, a potential probiotic, are closely associated with the development of various diseases such as obesity, diabetes, some neurodegenerative diseases, and certain cancers. However, there is still a lack of an effective method to detect the abundance of B. producta in the gut rapidly. Especially, DNA aptamers are now widely used as biometric components for medical testing due to their unique characteristics, including high chemical stability, low production cost, ease of chemical modification, low immunogenicity, and fast reproducibility. We successfully obtained a high-affinity nucleic acid aptamer library (B.p-R14) after 14 SELEX rounds, which efficiently discriminates B. producta in different analysis techniques including fluorometric suspension assays or fluorescence microscopy from other major gut bacteria in complex mixtures and even in human stool samples. These preliminary findings will be the basis towards aptamer-based biosensing applications for the fast and reliable monitoring of B. producta in the human gut microbiome.

Aptamer Based Nanoprobes for Detection of Foodborne Virus in Food and Environment Samples: Recent Progress and Challenges

Accepting the fact that there is a huge number of virus particles in food that lead to several infectious diseases, eliminating of the foodborne virus from food is tangible. In 2020, the appearance of new SARS-CoV-2 variants had remarked the importance of food safety in our lives. Detection virus is a dynamic domain. Recently, many papers have tried to detect several foodborne viruses by using conventional sensing platforms including ELISA (enzyme-linked immunosorbent assay), PCR (polymerase chain reaction-based methods) and NASBA (nucleic acid sequence-based amplification). However, small sizes, low infective doses and discrete distribution of the foodborne virus have converted these microorganisms into the most challengeable pathogen in the food samples matrix. Foodborne virus detection exploiting aptamer-based biosensors has attracted considerable attention toward the numerous benefits of sourcing from aptamers in which a variety of viruses could be detected by conjugation of aptamer-virus. The development of multiple sensing methodologies and platforms in terms of aptasensor application in real food and environment samples has demonstrated promising results. In this review, we present the latest developments in myriad types of aptasensors (including electrochemical, optical and piezoelectric aptasensor) for the quantification of foodborne viruses. Working strategies, benefits and disadvantages of these platforms are argued.

Object Detection in Medical Images Based on Hierarchical Transformer and Mask Mechanism

The object detection task in the medical field is challenging in terms of classification and regression. Due to its crucial applications in computer-aided diagnosis and computer-aided detection techniques, an increasing number of researchers are transferring the object detection techniques to the medical field. However, in existing work on object detection, researchers do not consider the low resolution of medical images, the high amount of noise, and the small size of the objects to be detected. Based on this, this paper proposes a new algorithmic model called the MS Transformer, where a self-supervised learning approach is used to perform a random mask on the input image to reconstruct the input features, learn a richer feature vector, and filter out excessive noise. To focus the model on the small objects that are being detected, the hierarchical transformer model is introduced in this paper, and a sliding window with a local self-attention mechanism is used to give a higher attention score to the small objects to be detected. Finally, a single-stage object detection framework is used to predict the sequence of sets at the location of the bounding box and the class of objects to be detected. On the DeepLesion and BCDD benchmark dataset, the model proposed in this paper achieves better performance improvement on multiple evaluation metric categories.

Development of magnetic nanoparticle assisted aptamer-quantum dot based biosensor for the detection of Escherichia coli in water samples

The contamination of food and potable water with microorganisms may cause food-borne and water-borne diseases. The common contaminants include Escherichia coli (E. coli), Salmonella sp. etc. The conventional methods for monitoring the water quality for the presence of bacterial contaminants are time-consuming, expensive, and not suitable for rapid on-spot detection in field conditions. In the current study, super paramagnetic iron oxide nanoparticles (SPIONs) were synthesized and conjugated with E. coli specific Aptamer I to detect E. coli cells qualitatively as well as quantitatively. The sludge consisting of E. coli- SPION complex was separated via magnetic separation. The presence of E. coli cells was confirmed with the help of standard techniques and confocal laser scanning microscopy (CLSM) employing Aptamer II conjugated CdTe-MPA quantum dots (QDs). Finally, an ATmega 328P prototype biosensor based on Aptamer II conjugated CdTe MPA QDs exhibited quantitative and qualitative abilities to detect E.coli. This prototype biosensor can even detect low bacterial counts (up to 1 × 10² cfu) with the help of a photodiode and plano-convex lens. Further, the prototype biosensor made up of ultraviolet light-emitting diode (UV LED), liquid crystal display (LCD) and ATmega328Pmicrocontroller offers on-spot detection of E.coli in water samples with high resolution and sensitivity. Similarly, this in-house developed prototype biosensor can also be utilized to detect bacterial contamination in food samples.

Aptasensor Based on Microfluidic for Foodborne Pathogenic Bacteria and Virus Detection: A Review

In today's world, which is entangled with numerous foodborne pathogenic bacteria and viruses, it appears to be essential to rethink detection methods of these due to the importance of food safety in our lives. The vast majority of detection methods for foodborne pathogenic bacteria and viruses have suffered from sensitivity and selectivity due to the small size of these pathogens. Besides, these types of sensing approaches can improve on-site detection platforms in the fields of food safety. In recent, microfluidics systems as new emerging types of portable sensing approaches can introduce efficient and simple biodevice by integration with several analytical methods such as electrochemical, optical and colorimetric techniques. Additionally, taking advantage of aptamer as a selective bioreceptor in the sensing of microfluidics system has provided selective, sensitive, portable and affordable sensing approaches. Furthermore, some papers use increased data transferability ability and computational power of these sensing platforms by exploiting smartphones. In this review, we attempted to provide an overview of the current state of the recent aptasensor based on microfluidic for screening of foodborne pathogenic bacteria and viruses. Working strategies, benefits and disadvantages of these sensing approaches are briefly discussed.

Aptamers against Pathogenic Bacteria: Selection Strategies and Apta-assay/Aptasensor Application for Food Safety

Pathogenic bacteria are primarily kinds of detrimental agents that cause mankind illness via contaminated food with traits of multiple types, universality, and low content. In view of the detection demands for rapidity, aptamer recognition factors emerged as a substitution for antibodies, which are short single strands of nucleic acid selected via in vitro. They display certain superiorities over antibodies, such as preferable stability, liable modification, and cost-efficiency. Taking advantage of the situation, numerous aptamers against pathogenic bacteria have been successfully selected and applied, yet there are still restrictions on commercial availability. In this review, the strategies/approaches to key sections in pathogen aptamers SELEX and post-SELEX are summarized and sorted out. Recently, optical, electrochemical, and piezoelectric aptamer-based assays or sensors dedicated to pathogen detection have been critically reviewed. Ultimately, the existing challenges and future trends in this field are proposed to further promote development prospects.

A new cognate aptamer pair-based sandwich-type electrochemical biosensor for sensitive detection of Staphylococcus aureus

A pair of aptamers for Staphylococcus aureus (S. aureus) is immensely needed for developing sandwich-type signal-on electrochemical aptasensors. In this study, we have successfully developed a cognate pair of aptamers that bind to S. aureus simultaneously, among many aptamer candidates screened out after a total of ten rounds of bacterial cell-based systemic evolution of ligands by exponential enrichment (SELEX). The obtained aptamer candidates have been estimated by using flow cytometry and confocal microscope, to evaluate their binding affinity and specificity to the target cells. The screening for sandwich-type binding of cognate pair of aptamers with S. aureus was conducted by enzyme-based colorimetric assay and confirmed by circular dichroism (CD), two-color fluorescence imaging analysis, additionally. The cognate pair of two aptamers, named SA37 and SA81, showed very good affinity and specificity to S. aureus with their dissociation constants (Kd) of 16.5 ± 3.4 nM and 14.47 ± 8.18 nM, respectively. These newly discovered cognate pair of aptamers have been very successfully implemented to develop a sandwich-type signal-on electrochemical biosensor with the limit of detection (LOD) of 39 CFUs and 414 CFUs in buffer and spiked tap water samples, respectively. This study showed that this cognate pair of aptamers-based detection of S. aureus enables simple, rapid, and robust biosensors for food safety management.

Preparation of Bi/BiOBr sensitized titania nanorod array via one-pot solvothermal method and construction of kanamycin photoelectrochemical aptasensor

In this work, a photoelectrochemical (PEC) aptasensor for detecting kanamycin (KAN) was designed based on aptamer modified Bi/BiOBr/ titania nanorod array (TiO2 NRA). Bi/BiOBr was loaded onto TiO2 NRA via...

On Demand Biosensors for Early Diagnosis of Cancer and Immune Checkpoints Blockade Therapy Monitoring from Liquid Biopsy

Recently, considerable interest has emerged in the development of biosensors to detect biomarkers and immune checkpoints to identify and measure cancer through liquid biopsies. The detection of cancer biomarkers from a small volume of blood is relatively fast compared to the gold standard of tissue biopsies. Traditional immuno-histochemistry (IHC) requires tissue samples obtained using invasive procedures and specific expertise as well as sophisticated instruments. Furthermore, the turnaround for IHC assays is usually several days. To overcome these challenges, on-demand biosensor-based assays were developed to provide more immediate prognostic information for clinicians. Novel rapid, highly precise, and sensitive approaches have been under investigation using physical and biochemical methods to sense biomarkers. Additionally, interest in understanding immune checkpoints has facilitated the rapid detection of cancer prognosis from liquid biopsies. Typically, these devices combine various classes of detectors with digital outputs for the measurement of soluble cancer or immune checkpoint (IC) markers from liquid biopsy samples. These sensor devices have two key advantages: (a) a small volume of blood drawn from the patient is sufficient for analysis, and (b) it could aid physicians in quickly selecting and deciding the appropriate therapy regime for the patients (e.g., immune checkpoint blockade (ICB) therapy). In this review, we will provide updates on potential cancer markers, various biosensors in cancer diagnosis, and the corresponding limits of detection, while focusing on biosensor development for IC marker detection.

Array-based microbial identification upon extracellular aminoglycoside residue sensing

Sensitive and rapid identification of pathogenic microorganisms is of great importance for clinical diagnosis and treatment. In this study, we developed an ultrasensitive colorimetric sensor array (CSA) based on the interactions between aminoglycoside antibiotics (AMGs) and Ag nanoparticles decorated with β-cyclodextrin (AgNPs@β-CD) to discriminate microorganisms quickly and accurately. Microorganisms can absorb different amounts of AMGs after incubation. Upon the addition of AgNPs@β-CD, the corresponding extracellular AMG residues will bind to AgNPs@β-CD, leading to color changes due to the modifications in localized surface plasmon resonance. The array was developed using 4 AMGs as sensing elements and AgNPs@β-CD as the colorimetric probe to generate a unique colorimetric response pattern for each microorganism. Standard chemometric methods indicated excellent discrimination among 20 microorganisms at low concentrations of 2 × 10⁶ CFU/mL. Therefore, this ultrasensitive CSA can be used for microbial discrimination portably and efficiently. Importantly, the concentration of microbial discrimination by our array is much lower than that of prior CSAs. This method of extracellular residue sensing also provided a new strategy to improve the sensitivity of conventional CSA in the discrimination of microorganisms, to measure the amount of intercellular uptake of AMGs by microorganisms, and to screen drugs that can easily be accumulated by the pathogenic microorganisms.