Sequencing of SARS-CoV-2 genome using different nanopore chemistries

Impact of microbiological molecular methodologies on adaptive sampling using nanopore sequencing in metagenomic studies

INTRODUCTION

Metagenomics, the genomic analysis of all species present within a mixed population, is an important tool used for the exploration of microbiomes in clinical and environmental microbiology. Whilst the development of next-generation sequencing, and more recently third generation long-read approaches such as nanopore sequencing, have greatly advanced the study of metagenomics, recovery of unbiased material from microbial populations remains challenging. One promising advancement in genomic sequencing from Oxford Nanopore Technologies (ONT) is adaptive sampling, which enables real-time enrichment or depletion of target sequences. As sequencing technologies continue to develop, and advances such as adaptive sampling become common techniques within the microbiological toolkit, it is essential to evaluate the benefits of such advancements to metagenomic studies, and the impact of methodological choices on research outcomes.

AIM AND METHODS

Given the rapid development of sequencing tools and chemistry, this study aimed to demonstrate the impacts of choice of DNA extraction kit and sequencing chemistry on downstream metagenomic analyses. We first explored the quality and accuracy of 16S rRNA amplicon sequencing for DNA extracted from the ZymoBIOMICS Microbial Community Standard, using a range of commercially available DNA extraction kits to understand the effects of different kit biases on assessment of microbiome composition. We next compared the quality and accuracy of metagenomic analyses for two nanopore-based ligation chemistry kits with differing levels of base-calling error; the older and more error-prone (~ 97% accuracy) LSK109 chemistry, and newer more accurate (~ 99% accuracy) LSK112 Q20 + chemistry. Finally, we assessed the impact of the nanopore sequencing chemistry version on the output of the novel adaptive sampling approach for real-time enrichment of the genome for the yeast Saccharomyces cerevisiae from the microbial community.

RESULTS

Firstly, DNA extraction kit methodology impacted the composition of the yield, with mechanical bead-beating methodologies providing the least biased picture due to efficient lysis of Gram-positive microbes present in the community standard, with differences in bead-beating methodologies also producing variation in composition. Secondly, whilst use of the Q20 + nanopore sequencing kit chemistry improved the base-calling data quality, the resulting metagenomic assemblies were not significantly improved based on common metrics and assembly statistics. Most importantly, we demonstrated the effective application of adaptive sampling for enriching a low-abundance genome within a metagenomic sample. This resulted in a 5-7-fold increase in target enrichment compared to non-adaptive sequencing, despite a reduction in overall sequencing throughput due to strand-rejection processes. Interestingly, no significant differences in adaptive sampling enrichment efficiency were observed between the older and newer ONT sequencing chemistries, suggesting that adaptive sampling performs consistently across different library preparation kits.

CONCLUSION

Our findings underscore the importance of selecting a DNA extraction methodology that minimises bias to ensure an accurate representation of microbial diversity in metagenomic studies. Additionally, despite the improved base-calling accuracy provided by newer Q20 + sequencing chemistry, we demonstrate that even older ONT sequencing chemistries can achieve reliable metagenomic sequencing results, enabling researchers to confidently use these approaches depending on their specific experimental needs. Critically, we highlight the significant potential of ONT's adaptive sampling technology for targeted enrichment of specific genomes within metagenomic samples. This approach offers broad applicability for enriching target organisms or genetic elements (e.g., pathogens or plasmids) or depleting unwanted DNA (e.g., host DNA) in diverse sample types from environmental and clinical studies. However, researchers should carefully weigh the benefits of adaptive sampling against the potential trade-offs in sequencing throughput, particularly for low-abundance targets, where strand rejection can lead to pore blocking. These results provide valuable guidance for optimising adaptive sampling in metagenomic workflows to achieve specific research objectives.

Single-Cell Omics for Transcriptome CHaracterization (SCOTCH): isoform-level characterization of gene expression through long-read single-cell RNA sequencing

Recent development involving long-read single-cell transcriptome sequencing (lr-scRNA-Seq) represents a significant leap forward in single-cell genomics. With the recent introduction of R10 flowcells by Oxford Nanopore, we propose that previous computational methods designed to handle high sequencing error rates are less relevant, and that the traditional approach using short reads to compile "barcode space" (candidate barcode list) to de-multiplex long reads are no longer necessary. Instead, computational methods should now shift focus on harnessing the unique benefits of long reads to analyze transcriptome complexity. In this context, we introduce a comprehensive suite of computational methods named Single-Cell Omics for Transcriptome CHaracterization (SCOTCH). SCOTCH supports both Nanopore and PacBio sequencing platforms, and is compatible with single-cell library preparation protocols from both 10X Genomics and Parse Biosciences. Through a sub-exon identification strategy with dynamic thresholding and read mapping scores, SCOTCH precisely aligns reads to known isoforms and discover novel isoforms, efficiently addressing ambiguous mapping challenges commonly encountered in long-read single-cell data. Comprehensive simulations and real data analyses across multiple platforms (including 10X Genomics and Parse Bioscience, paired with Illumina or Nanopore sequencing technologies with R9 and R10 flowcells, as well as PacBio sequencing) demonstrated that SCOTCH outperforms existing methods in mapping accuracy, quantification accuracy and novel isoform detection, while also uncovering novel biological insights on transcriptome complexity at the single-cell level.

Improved resolution of avian influenza virus using Oxford Nanopore R10 sequencing chemistry

Highly pathogenic avian influenza viruses continue to pose global risks to One Health, including agriculture, public, and animal health. Rapid and accurate genomic surveillance is critical for monitoring viral mutations, tracing transmission, and guiding interventions in near real-time. Oxford Nanopore sequencing holds promise for real-time influenza genotyping, but data quality from R9 chemistry has limited its adoption due to challenges resolving low-complexity regions such as the biologically critical hemagglutinin cleavage site, a homopolymer of basic amino acids that distinguish highly pathogenic strains. In this study, human and avian influenza isolates (n = 45) from Cambodia were sequenced using both R9.4.1 and R10.4.1 flow cells and chemistries to evaluate performance between approaches. Overall, R10.4.1 yielded increased data output with higher average quality compared to R9.4.1, producing improved consensus sequences using a reference-based bioinformatics approach. R10.4.1 had significantly lower minor population insertion and deletion frequencies, driven by improved performance in low sequence complexity regions prone to insertion and deletion errors, such as homopolymers. Within the hemagglutinin cleavage site, R10.4.1 resolved the correct motif in 90% of genomes compared to only 60% with R9.4.1. Further examination showed reduced frameshift mutations in consensus sequences generated with R10.4.1 that could result in incorrectly classified virulence with automated pipelines. Improved consensus genome quality from nanopore sequencing approaches, especially across biologically important low-complexity regions, is critical to reduce subjective hand-curation and will improve local and global genomic surveillance responses.

IMPORTANCE

This study demonstrates significant advancement in the field of influenza virus genomic surveillance by showcasing the superior accuracy and data quality of the Oxford Nanopore R10 sequencing chemistry compared to the older R9 chemistry. Improved resolution, including in the critical hemagglutinin multi-basic cleavage site, enables more reliable monitoring and tracking of viral mutations. This accelerates the ability to respond quickly to outbreaks, potentially improving impacts on public health, agriculture, and the economy by enabling more accurate and timely interventions.

A collaborative approach to improving representation in viral genomic surveillance

The lack of routine viral genomic surveillance delayed the initial detection of SARS-CoV-2, allowing the virus to spread unfettered at the outset of the U.S. epidemic. Over subsequent months, poor surveillance enabled variants to emerge unnoticed. Against this backdrop, long-standing social and racial inequities have contributed to a greater burden of cases and deaths among minority groups. To begin to address these problems, we developed a new variant surveillance model geared toward building 'next generation' genome sequencing capacity at universities in or near rural areas and engaging the participation of their local communities. The resulting genomic surveillance network has generated more than 1,000 SARS-CoV-2 genomes to date, including the first confirmed case in northeast Louisiana of Omicron, and the first and sixth confirmed cases in Georgia of the emergent BA.2.75 and BQ.1.1 variants, respectively. In agreement with other studies, significantly higher viral gene copy numbers were observed in Delta variant samples compared to those from Omicron BA.1 variant infections, and lower copy numbers were seen in asymptomatic infections relative to symptomatic ones. Collectively, the results and outcomes from our collaborative work demonstrate that establishing genomic surveillance capacity at smaller academic institutions in rural areas and fostering relationships between academic teams and local health clinics represent a robust pathway to improve pandemic readiness.

A systematic review of the barcoding strategy that contributes to COVID-19 diagnostics at a population level

The outbreak of SARS-CoV-2 has made us more alert to the importance of viral diagnostics at a population level to rapidly control the spread of the disease. The critical question would be how to scale up testing capacity and perform a diagnostic test in a high-throughput manner with robust results and affordable costs. Here, the latest 26 articles using barcoding technology for COVID-19 diagnostics and biologically-relevant studies are reviewed. Barcodes are molecular tags, that allow proceeding an array of samples at once. To date, barcoding technology followed by high-throughput sequencing has been made for molecular diagnostics for SARS-CoV-2 infections because it can synchronously analyze up to tens of thousands of clinical samples within a short diagnostic time. Essentially, this technology can also be used together with different biotechnologies, allowing for investigation with resolution of single molecules. In this Mini-Review, I first explain the general principle of the barcoding strategy and then put forward recent studies using this technology to accomplish COVID-19 diagnostics and basic research. In the meantime, I provide the viewpoint to improve the current COVID-19 diagnostic strategy with potential solutions. Finally, and importantly, two practical ideas about how barcodes can be further applied in studying SARS-CoV-2 to accelerate our understanding of this virus are proposed.

Third-Generation Sequencing of Epigenetic DNA

The discovery of epigenetic bases has revolutionised the understanding of disease and development. Among the most studied epigenetic marks are cytosines covalently modified at the 5 position. In order to gain insight into their biological significance, the ability to determine their spatiotemporal distribution within the genome is essential. Techniques for sequencing on "next-generation" platforms often involve harsh chemical treatments leading to sample degradation. Third-generation sequencing promises to further revolutionise the field by providing long reads, enabling coverage of highly repetitive regions of the genome or structural variants considered unmappable by next generation sequencing technology. While the ability of third-generation platforms to directly detect epigenetic modifications is continuously improving, at present chemical or enzymatic derivatisation presents the most convenient means of enhancing reliability. This Review presents techniques available for the detection of cytosine modifications on third-generation platforms.

Needs, Challenges and Countermeasures of SARS-CoV-2 Surveillance in Cold-Chain Foods and Packaging to Prevent Possible COVID-19 Resurgence: A Perspective from Advanced Detections

The pandemic caused by SARS-CoV-2 has a huge impact on the global economy. SARS-CoV-2 could possibly and potentially be transmitted to humans through cold-chain foods and packaging (namely good-to-human), although it mainly depends on a human-to-human route. It is imperative to develop countermeasures to cope with the spread of viruses and fulfil effective surveillance of cold-chain foods and packaging. This review outlined SARS-CoV-2-related cold-chain food incidents and current methods for detecting SARS-CoV-2. Then the needs, challenges and practicable countermeasures for SARS-CoV-2 detection, specifically for cold-chain foods and packaging, were underlined. In fact, currently established detection methods for SARS-CoV-2 are mostly used for humans; thus, these may not be ideally applied to cold-chain foods directly. Therefore, it creates a need to develop novel methods and low-cost, automatic, mini-sized devices specifically for cold-chain foods and packaging. The review intended to draw people's attention to the possible spread of SARS-CoV-2 with cold-chain foods and proposed perspectives for futuristic cold-chain foods monitoring during the pandemic.

Identification of Genomic Variants of SARS-CoV-2 Using Nanopore Sequencing

Background and Objectives: SARS-CoV-2 is the first global threat and life-changing event of the twenty-first century. Although efficient treatments and vaccines have been developed, due to the virus's ability to mutate in key regions of the genome, whole viral genome sequencing is needed for efficient monitoring, evaluation of the spread, and even the adjustment of the molecular diagnostic assays. Materials and Methods: In this study, Nanopore and Ion Torrent sequencing technologies were used to detect the main SARS-CoV-2 circulating strains in Timis County, Romania, between February 2021 and May 2022. Results: We identified 22 virus lineages belonging to seven clades: 20A, 20I (Alpha, V1), 21B (Kappa), 21I (Delta), 21J (Delta), 21K (Omicron), and 21L (Omicron). Conclusions: Results obtained with both methods are comparable, and we confirm the utility of Nanopore sequencing in large-scale epidemiological surveillance due to the lower cost and reduced time for library preparation.

Nanomaterials to combat SARS-CoV-2: Strategies to prevent, diagnose and treat COVID-19

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection and the associated coronavirus disease 2019 (COVID-19), which severely affect the respiratory system and several organs and tissues, and may lead to death, have shown how science can respond when challenged by a global emergency, offering as a response a myriad of rapid technological developments. Development of vaccines at lightning speed is one of them. SARS-CoV-2 outbreaks have stressed healthcare systems, questioning patients care by using standard non-adapted therapies and diagnostic tools. In this scenario, nanotechnology has offered new tools, techniques and opportunities for prevention, for rapid, accurate and sensitive diagnosis and treatment of COVID-19. In this review, we focus on the nanotechnological applications and nano-based materials (i.e., personal protective equipment) to combat SARS-CoV-2 transmission, infection, organ damage and for the development of new tools for virosurveillance, diagnose and immune protection by mRNA and other nano-based vaccines. All the nano-based developed tools have allowed a historical, unprecedented, real time epidemiological surveillance and diagnosis of SARS-CoV-2 infection, at community and international levels. The nano-based technology has help to predict and detect how this Sarbecovirus is mutating and the severity of the associated COVID-19 disease, thereby assisting the administration and public health services to make decisions and measures for preparedness against the emerging variants of SARS-CoV-2 and severe or lethal COVID-19.

A collaborative approach to improve representation in viral genomic surveillance

The lack of routine viral genomic surveillance delayed the initial detection of SARS-CoV-2, allowing the virus to spread unfettered at the outset of the U.S. epidemic. Over subsequent months, poor surveillance enabled variants to emerge unnoticed. Against this backdrop, long-standing social and racial inequities have contributed to a greater burden of cases and deaths among minority groups. To begin to address these problems, we developed a new variant surveillance model geared toward building microbial genome sequencing capacity at universities in or near rural areas and engaging the participation of their local communities. The resulting genomic surveillance network has generated more than 1,000 SARS-CoV-2 genomes to date, including the first confirmed case in northeast Louisiana of Omicron, and the first and sixth confirmed cases in Georgia of the emergent BA.2.75 and BQ.1.1 variants, respectively. In agreement with other studies, significantly higher viral gene copy numbers were observed in Delta variant samples compared to those from Omicron BA.1 variant infections, and lower copy numbers were seen in asymptomatic infections relative to symptomatic ones. Collectively, the results and outcomes from our collaborative work demonstrate that establishing genomic surveillance capacity at smaller academic institutions in rural areas and fostering relationships between academic teams and local health clinics represent a robust pathway to improve pandemic readiness.

Author summary

Genomic surveillance involves decoding a pathogen’s genetic code to track its spread and evolution. During the pandemic, genomic surveillance programs around the world provided valuable data to scientists, doctors, and public health officials. Knowing the complete SARS-CoV-2 genome has helped detect the emergence of new variants, including ones that are more transmissible or cause more severe disease, and has supported the development of diagnostics, vaccines, and therapeutics. The impact of genomic surveillance on public health depends on representative sampling that accurately reflects the diversity and distribution of populations, as well as rapid turnaround time from sampling to data sharing. After a slow start, SARS-CoV-2 genomic surveillance in the United States grew exponentially. Despite this, many rural regions and ethnic minorities remain poorly represented, leaving significant gaps in the data that informs public health responses. To address this problem, we formed a network of universities and clinics in Louisiana, Georgia, and Mississippi with the goal of increasing SARS-CoV-2 sequencing volume, representation, and equity. Our results demonstrate the advantages of rapidly sequencing pathogens in the same communities where the cases occur and present a model that leverages existing academic and clinical infrastructure for a powerful decentralized genomic surveillance system.

Cas9 targeted nanopore sequencing with enhanced variant calling improves CYP2D6-CYP2D7 hybrid allele genotyping

CYP2D6 is a very important pharmacogene as it is responsible for the metabolization or bioactivation of 20 to 30% of the clinically used drugs. However, despite its relatively small length of only 4.4 kb, it is one of the most challenging pharmacogenes to genotype due to the high similarity with its neighboring pseudogenes and the frequent occurrence of CYP2D6-CYP2D7 hybrids. Unfortunately, most current genotyping methods are therefore not able to correctly determine the complete CYP2D6-CYP2D7 sequence. Therefore, we developed a genotyping assay to generate complete allele-specific consensus sequences of complex regions by optimizing the PCR-free nanopore Cas9-targeted sequencing (nCATS) method combined with adaptive sequencing, and developing a new comprehensive long read genotyping (CoLoRGen) pipeline. The CoLoRGen pipeline first generates consensus sequences of both alleles and subsequently determines both large structural and small variants to ultimately assign the correct star-alleles. In reference samples, our genotyping assay confirms the presence of CYP2D6-CYP2D7 large structural variants, single nucleotide variants (SNVs), and small insertions and deletions (INDELs) that go undetected by most current assays. Moreover, our results provide direct evidence that the CYP2D6 genotype of the NA12878 DNA should be updated to include the CYP2D6-CYP2D7 *68 hybrid and several additional single nucleotide variants compared to existing references. Ultimately, the nCATS-CoLoRGen genotyping assay additionally allows for more accurate gene function predictions by enabling the possibility to detect and phase de novo mutations in addition to known large structural and small variants.

During the last decades, the usefulness of personalized medicine has become increasingly apparent. Directly linked to that is the need for accurate genotyping assays to determine the pharmacogenetic profile of patients. Continuing research has led to the development of genotyping assays that perform quite robustly. However, complex genes remain an issue when it comes to determining the complete sequence correctly. An example of such a complex but very important pharmacogene is CYP2D6. Therefore, we developed a genotyping assay in an attempt to generate complete allele-specific consensus sequences of CYP2D6, by optimizing a targeted amplification-free long-read sequencing method and developing a new analysis pipeline. In reference samples, we showed that our genotyping assay performed accurately and confirmed the presence of variants that go undetected by most current assays. However, the implementation of this assay in practice is still hampered as the selected enrichment strategies inherently lead to a low percentage of on-target reads, resulting in low on-target sequencing depths. Further optimization and validation of the assay is thus needed, but definitely worth considering for follow-up research as we already demonstrated the added value for generating more complete genotypes, which on its turn will result in more accurate gene function predictions.

Diagnosis of pathogens causing bacterial meningitis using Nanopore sequencing in a resource-limited setting

Aim

The aim of the present study is to compare the performance of 16S rRNA Nanopore sequencing and conventional culture in detecting infectious pathogens in patients with suspected meningitis in a resource-limited setting without extensive bioinformatics expertise.

Methods

DNA was isolated from the cerebrospinal fluid (CSF) of 30 patients with suspected bacterial meningitis. The isolated DNA was subjected to 16S sequencing using MinION™. The data were analysed in real time via the EPI2ME cloud platform. The Nanopore sequencing was done in parallel to routine microbiological diagnostics.

Results

Nanopore sequencing detected bacterial pathogens to species level in 13 of 30 (43%) samples. CSF culture showed 40% (12/30) positivity. In 21 of 30 patients (70%) with suspected bacterial meningitis, both methods yielded concordant results. About nine of 30 samples showed discordant results, of these five were false positive and four were false negative. In five of the culture negative results, nanopore sequencing was able to detect pathogen genome, due to the higher sensitivity of the molecular diagnostics. In two other samples, the CSF culture revealed Cryptococcus neoformans and Streptococcus pneumoniae, which were not detected by Nanopore sequencing. Overall, using both the cultures and 16S Nanopore sequencing, positivity rate increased from 40% (12/30) to 57% (17/30).

Conclusion

Next-generation sequencing could detect pathogens within six hours and could become an important tool for both pathogen screening and surveillance in low- and middle-income countries (LMICs) that do not have direct access to extensive bioinformatics expertise.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12941-022-00530-6.

A high scale SARS-CoV-2 profiling by its whole-genome sequencing using Oxford Nanopore Technology in Kazakhstan

Severe acute respiratory syndrome (SARS-CoV-2) is responsible for the worldwide pandemic, COVID-19. The original viral whole-genome was sequenced by a high-throughput sequencing approach from the samples obtained from Wuhan, China. Real-time gene sequencing is the main parameter to manage viral outbreaks because it expands our understanding of virus proliferation, spread, and evolution. Whole-genome sequencing is critical for SARS-CoV-2 variant surveillance, the development of new vaccines and boosters, and the representation of epidemiological situations in the country. A significant increase in the number of COVID-19 cases confirmed in August 2021 in Kazakhstan facilitated a need to establish an effective and proficient system for further study of SARS-CoV-2 genetic variants and the development of future Kazakhstan’s genomic surveillance program. The SARS-CoV-2 whole-genome was sequenced according to SARS-CoV-2 ARTIC protocol (EXP-MRT001) by Oxford Nanopore Technologies at the National Laboratory Astana, Kazakhstan to track viral variants circulating in the country. The 500 samples kindly provided by the Republican Diagnostic Center (UMC-NU) and private laboratory KDL “Olymp” were collected from individuals in Nur-Sultan city diagnosed with COVID-19 from August 2021 to May 2022 using real-time reverse transcription-quantitative polymerase chain reaction (RT-qPCR). All samples had a cycle threshold (Ct) value below 20 with an average Ct value of 17.03. The overall average value of sequencing depth coverage for samples is 244X. 341 whole-genome sequences that passed quality control were deposited in the Global initiative on sharing all influenza data (GISAID). The BA.1.1 (n = 189), BA.1 (n = 15), BA.2 (n = 3), BA.1.15 (n = 1), BA.1.17.2 (n = 1) omicron lineages, AY.122 (n = 119), B.1.617.2 (n = 8), AY.111 (n = 2), AY.126 (n = 1), AY.4 (n = 1) delta lineages, one sample B.1.1.7 (n = 1) belongs to alpha lineage, and one sample B.1.637 (n = 1) belongs to small sublineage were detected in this study. This is the first study of SARS-CoV-2 whole-genome sequencing by the ONT approach in Kazakhstan, which can be expanded for the investigation of other emerging viral or bacterial infections on the country level.

Receptor-Binding-Motif-Targeted Sanger Sequencing: a Quick and Cost-Effective Strategy for Molecular Surveillance of SARS-CoV-2 Variants

Whole-genome sequencing (WGS) is the gold standard for characterizing the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) genome and identification of new variants. However, the cost involved and time needed for WGS prevent routine, rapid clinical use. This study aimed to develop a quick and cost-effective surveillance strategy for SARS-CoV-2 variants in saliva and nasal swab samples by spike protein receptor-binding-motif (RBM)-targeted Sanger sequencing. Saliva and nasal swabs prescreened for the presence of the nucleocapsid (N) gene of SARS-CoV-2 were subjected to RBM-specific single-amplicon generation and Sanger sequencing. Sequences were aligned by CLC Sequence Viewer 8, and variants were identified based upon specific mutation signature. Based on this strategy, the present study identified Alpha, Beta/Gamma, Delta, and Omicron variants in a quick and cost-effective manner.

IMPORTANCE The coronavirus disease 2019 (COVID-19) pandemic resulted in 427 million infections and 5.9 million deaths globally as of 21 February 2022. SARS-CoV-2, the causative agent of the COVID-19 pandemic, frequently mutates and has developed into variants of major public health concerns. Following the Alpha variant (B.1.1.7) infection wave, the Delta variant (B.1.617.2) became prevalent, and now the recently identified Omicron (B.1.1.529) variant is spreading rapidly and forming BA.1, BA.1.1, BA.2, BA.3, BA.4, and BA.5 lineages of concern. Prompt identification of mutational changes in SARS-CoV-2 variants is challenging but critical to managing the disease spread and vaccine/therapeutic modifications. Considering the cost involved and resource limitation of WGS globally, an RBM-targeted Sanger sequencing strategy is adopted in this study for quick molecular surveillance of SARS-CoV-2 variants.

CalmBelt: Rapid SARS-CoV-2 Genome Characterization for Outbreak Tracking

Background: The ongoing COVID-19 pandemic is a global health crisis caused by the spread of SARS-CoV-2. Establishing links between known cases is crucial for the containment of COVID-19. In the healthcare setting, the ability to rapidly identify potential healthcare-associated COVID-19 clusters is critical for healthcare worker and patient safety. Increasing sequencing technology accessibility has allowed routine clinical diagnostic laboratories to sequence SARS-CoV-2 in clinical samples. However, these laboratories often lack specialized informatics skills required for sequence analysis. Therefore, an on-site, intuitive sequence analysis tool that enables clinical laboratory users to analyze multiple genomes and derive clinically relevant information within an actionable timeframe is needed. Results: We propose CalmBelt, an integrated framework for on-site whole genome characterization and outbreak tracking. Nanopore sequencing technology enables on-site sequencing and construction of draft genomes for multiple SARS-CoV-2 samples within 12 h. CalmBelt's interactive interface allows users to analyse multiple SARS-CoV-2 genomes by utilizing whole genome information, collection date, and additional information such as predefined potential clusters from epidemiological investigations. CalmBelt also integrates established SARS-CoV-2 nomenclature assignments, GISAID clades and PANGO lineages, allowing users to visualize relatedness between samples together with the nomenclatures. We demonstrated multiple use cases including investigation of potential hospital transmission, mining transmission patterns in a large outbreak, and monitoring possible diagnostic-escape. Conclusions: This paper presents an on-site rapid framework for SARS-CoV-2 whole genome characterization. CalmBelt interactive web application allows non-technical users, such as routine clinical laboratory users in hospitals to determine SARS-CoV-2 variants of concern, as well as investigate the presence of potential transmission clusters. The framework is designed to be compatible with routine usage in clinical laboratories as it only requires readily available sample data, and generates information that impacts immediate infection control mitigations.

Nanopore sequencing of SARS-CoV-2: Comparison of short and long PCR-tiling amplicon protocols

Surveillance of the SARS-CoV-2 variants including the quickly spreading mutants by rapid and near real-time sequencing of the viral genome provides an important tool for effective health policy decision making in the ongoing COVID-19 pandemic. Here we evaluated PCR-tiling of short (~400-bp) and long (~2 and ~2.5-kb) amplicons combined with nanopore sequencing on a MinION device for analysis of the SARS-CoV-2 genome sequences. Analysis of several sequencing runs demonstrated that using the long amplicon schemes outperforms the original protocol based on the 400-bp amplicons. It also illustrated common artefacts and problems associated with PCR-tiling approach, such as uneven genome coverage, variable fraction of discarded sequencing reads, including human and bacterial contamination, as well as the presence of reads derived from the viral sub-genomic RNAs.

A targeted approach with nanopore sequencing for the universal detection and identification of flaviviruses

Nucleic acid test (NAT), most typically quantitative PCR, is one of the standard methods for species specific flavivirus diagnosis. Semi-comprehensive NATs such as pan-flavivirus PCR which covers genus Flavivirus are also available; however, further specification by sequencing is required for species level differentiation. In this study, a semi-comprehensive detection system that allows species differentiation of flaviviruses was developed by integration of the pan-flavivirus PCR and Nanopore sequencing. In addition, a multiplexing method was established by adding index sequences through the PCR with a streamlined bioinformatics pipeline. This enables defining cut-off values for observed read counts. In the laboratory setting, this approach allowed the detection of up to nine different flaviviruses. Using clinical samples collected in Vietnam and Brazil, seven different flaviviruses were also detected. When compared to a commercial NAT, the sensitivity and specificity of our system were 66.7% and 95.4%, respectively. Conversely, when compared to our system, the sensitivity and specificity of the commercial NAT were 57.1% and 96.9%, respectively. In addition, Nanopore sequencing detected more positive samples (n = 8) compared to the commercial NAT (n = 6). Collectively, our study has established a semi-comprehensive sequencing-based diagnostic system for the detection of flaviviruses at extremely affordable costs, considerable sensitivity, and only requires simple experimental methods.