Lateral locked plating for distal femur fractures by low-energy trauma: what makes a difference in healing?

Treatment of AO/OTA type 43-C3 pilon fractures with a combination of miniplate and main plate: a retrospective analysis

BACKGROUND

AO/OTA type 43-C3 pilon fractures are complex distal tibial fractures associated with high disability rates, surgical challenges, and frequent postoperative complications. Effective treatment of type-C3 pilon fracture remains an important research focus. This study aimed to evaluate the efficacy of a combined miniplate and main plate fixation strategy compared to traditional treatment methods.

METHODS

A retrospective analysis was conducted on 64 patients with type 43-C3 pilon fractures treated between June 2018 and June 2022. Patients were divided into a miniplate group (MP group, n = 31) and a traditional treatment group (TT group, n = 33). Outcomes including operative duration, reduction quality, fracture healing, complications, functional scores (AOFAS, VAS, ROM), and hospitalization data were analyzed.

RESULTS

The surgery was completed successfully in both groups, and the average follow-up duration was 16.78 ± 3.27 months. There were no significant differences in the duration of preoperative waiting, hospital stay, and weight-bearing between the two groups (P > 0.05). The duration of surgery was significantly shorter in the MP group than in the TT group (P < 0.05). The quality of fracture reduction and healing at 6 weeks after surgery in the MP group was significantly better than that in the TT group (P < 0.05). There was no significant difference in the visual analog scale scores between the two groups. However, at 6 months postoperatively and at the last follow-up, the American Orthopedic Foot and Ankle Society score and ankle fire activity range of motion were significantly better for those in the TT group. There were two cases of ischemic osteonecrosis, two of poor incision healing, and one of severely poor wound healing in the TT group; however, only one patient in the MP group had poor incision healing.

CONCLUSION

The use of miniplates combined with main plates in the treatment of type-C3 pilon fracture has obvious advantages, which simplifies the difficulty of the surgery, reduces the volume of the ankle joint, reduces postoperative complications, and is beneficial to postoperative exercise and ankle function recovery.

Radiographic Union Assessment in Surgically Treated Distal Femur Fractures: A Systematic Review

BACKGROUND

Distal femur fractures are known to have challenging nonunion rates. Despite various available treatment methods aimed to improve union, optimal interventions are yet to be determined. Importantly, there remains no standard agreement on what defines radiographic union. Although various proposed criteria of defining radiographic union exist in the literature, there is no clear consensus on which criteria provide the most precise measurement. The use of inconsistent measures of fracture healing between studies can be problematic and limits their generalizability. Therefore, this systematic review aims to identify how fracture union is defined based on radiographic parameters for surgically treated distal femur fractures in current literature.

METHODS

In accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, Medline, EMBASE, Cochrane Central Register of Controlled Trials, and Web of Science Core Collection databases were searched from inception to October 2022. Studies that addressed surgically treated distal femur fractures with reported radiographic union assessment were included. Outcomes extracted included radiographic definition of union; any testing of validity, reliability, or responsiveness; reported union rate; reported time to fracture union; and any functional outcomes correlated with radiographic union.

RESULTS

Sixty articles with 3,050 operatively treated distal femur fractures were included. Operative interventions included lateral locked plate (42 studies), intramedullary nail (15 studies), dynamic condylar screw or blade plate (7 studies), dual plate or plate and nail construct (5 studies), distal anterior-posterior/posterior-anterior screws (1 study), and external fixation with a circular frame (1 study). The range of mean follow-up time reported was 4.3 to 44 months. The most common definitions of fracture union included "bridging or callus formation across 3 of 4 cortices" in 26 (43%) studies, "bony bridging of cortices" in 21 (35%) studies, and "complete bridging of cortices" in 9 (15%) studies. Two studies included additional assessment of radiographic union using the Radiographic Union Scale in Tibial fracture (RUST) or modified Radiographic Union Scale in Tibial fracture (mRUST) scores. One study included description of validity, and the other study included reliability testing. The reported mean union rate of distal femur fractures was 89% (range 58%-100%). The mean time to fracture union was documented in 49 studies and found to be 18 weeks (range 12-36 weeks) in 2,441 cases. No studies reported correlations between functional outcomes and radiographic parameters.

CONCLUSION

The current literature evaluating surgically treated distal femur fractures lacks consistent definition of radiographic fracture union, and the appropriate time point to make this judgement is unclear. To advance surgical optimization, it is necessary that future research uses validated, reliable, and continuous measures of radiographic bone healing and correlation with functional outcomes.

LEVEL OF EVIDENCE

Level IV. See Instructions for Authors for a complete description of levels of evidence.

Distal femur fractures: basic science and international perspectives

Distal femur fractures are challenging injuries to manage, and complication rates remain high. This article summarizes the international and basic science perspectives regarding distal femoral fractures that were presented at the 2022 Orthopaedic Trauma Association Annual Meeting. We review a number of critical concepts that can be considered to optimize the treatment of these difficult fractures. These include biomechanical considerations for distal femur fixation constructs, emerging treatments to prevent post-traumatic arthritis, both systemic and local biologic treatments to optimize nonunion management, the relative advantages and disadvantages of plate versus nail versus dual-implant constructs, and finally important factors which determine outcomes. A robust understanding of these principles can significantly improve success rates and minimize complications in the treatment of these challenging injuries.

What Is the Likelihood of Union and Frequency of Complications After Parallel Plating and Supplemental Bone Grafting for Resistant Distal Femoral Nonunions?

BACKGROUND

Management of resistant distal femur nonunions is challenging because patients not only have disability from an unhealed fracture, but also often have a shortened femur, stiff knee, deformities, and bone defects to address during revision surgery. Dual plating of the distal femur in such a setting can maintain stability that allows the nonunion to heal while also addressing bone defects and correcting deformities simultaneously. Dual-plating techniques that have been described lack standardization with regard to the size and type of medial-side implants and configuration of the dual-plate construct.

QUESTIONS/PURPOSES

(1) What proportion of patients achieve radiologic evidence of union after parallel plating of resistant distal femoral nonunions? (2) What improvements in function are achieved with this approach, as assessed by improvements in femoral length discrepancy, knee flexion, and patient-reported outcome scores? (3) What complications are associated with the technique?

METHODS

Between 2017 and 2020, the senior author of this study treated 38 patients with resistant distal femoral nonunions, defined here as nonunions that persisted for more than 12 months since the injury despite a minimum of two previous internal fixation procedures. During the study period, our preferred technique for treating aseptic, resistant distal femoral nonunions was to use dual plates in a parallel configuration augmented with autografts. Of 38 patients, three patients with active signs of infection who underwent resection and reconstruction using bone transport techniques and two patients older than 65 years with deficient distal femur bone stock who underwent endoprosthetic reconstruction were excluded. Of the 33 included patients, 67% (22 of 33) were male. The median age was 40 years (range 20 to 67 years). Nonunion was articular and metaphyseal in 13 patients and metaphyseal only in 20 patients. Our surgical approach was to remove existing implants, perform intraoperative culturing to rule out infection, debride the nonunion, correct the deformity, perform intra-articular and extra-articular lysis of adhesions with quadriceps release, and apply fixation using medial and lateral fixed-angle anatomic locked implants positioned in a parallel configuration. Every attempt to improve length was undertaken, and the defects were filled with autografts. A total of 97% of patients were followed until union occurred (one of 33 was lost to follow-up before union was documented), and 79% (26 of 33) were assessed for functional outcomes at a minimum of 2 years (median 38 months [range 25 to 60 months]) after excluding patients lost to follow-up and those in whom union did not occur after parallel plating. Union was defined as evidence of central trabecular bridging on AP radiographs and posterior cortical bridging on lateral radiographs. These radiologic criteria were defined to overcome difficulties in assessing radiologic healing in patients with lateral and medial plates. With parallel plating, bridging trabecular bone along the posterior cortex on lateral radiographs and the central region on AP radiographs is visualized and can be appreciated and interpreted as evidence of healing in two orthogonal planes. Preoperative and follow-up clinical assessment of knee ROM, the extent of femoral length correction based on calibrated femoral radiographs before and after surgery, and the evaluation of improvement in lower limb function based on the preoperative and follow-up differences in responses to the lower extremity functional scale (LEFS) were studied (the LEFS is scored from 0 to 80, with higher scores representing better function). Complications and secondary surgical procedures to address them were abstracted from a longitudinally maintained trauma database.

RESULTS

Sixty-seven percent (22 of 33) of nonunions showed radiologic healing by 24 weeks, and another 24% (eight of 33) healed by 36 weeks. Six percent (two of 33) did not unite, and one patient was lost to follow-up before union was documented. In the 79% (26 of 33) of patients available for final functional outcome assessment, the median femoral shortening had improved from 2.4 cm (range 0 to 4 cm) to 1.1 cm (range 0 to 2.3 cm; p < 0.001), and the median knee ROM had improved from 70° (range 20° to 110°) to 100° (range 50° to 130°; p = 0.002) after surgery. The median LEFS score improved to 63 (range 41 to 78) compared with 22 (range 15 to 33; p < 0.001) before surgery. Serious complications, including major thromboembolic events, iliac graft site infection, knee stiffness (flexion < 60°), and medial plate impingement necessitating removal, were seen in 30% (10 of 33) of patients. Secondary surgical interventions were performed in 24% (eight of 33) of patients to address procedure-related complications.

CONCLUSION

Based on our findings, a high likelihood of union and improvements in knee and lower limb function can be expected with parallel plating of resistant distal femur nonunions using anatomic locked plates. However, the increased frequency of complications observed in our study suggests the need for improvements in dual-plating techniques and to explore possible alternative fixation methods through larger multicenter comparative studies.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

Using a Traction Table for Fracture Reduction during Minimally Invasive Plate Osteosynthesis (MIPO) of Distal Femoral Fractures Provides Anatomical Alignment

INTRODUCTION

Fracture reduction and fixation of distal femur fractures are technically demanding. Postoperative malalignment is still commonly reported after minimally invasive plate osteosynthesis (MIPO). We evaluated the postoperative alignment after MIPO using a traction table with a dedicated femoral support.

METHODS

The study included 32 patients aged 65 years or older with distal femur fractures of all AO/OTA types 32 (c) and 33 (except 33 B3 and C3) and peri-implant fractures with stable implants. Internal fixation was achieved with MIPO using a bridge-plating construct. Bilateral computed tomography (CT) scans of the entire femur were performed postoperatively, and measurements of the uninjured contralateral side defined anatomical alignment. Due to incomplete CT scans or excessively distorted femoral anatomy, seven patients were excluded from analyses.

RESULTS

Fracture reduction and fixation on the traction table provided excellent postoperative alignment. Only one of the 25 patients had a rotational malalignment of more than 15° (18°).

CONCLUSIONS

The surgical setup for MIPO of distal femur fractures on a traction table with a dedicated femoral support facilitated reduction and fixation, resulting in a low rate of postoperative malalignment, despite a high rate of peri-implant fractures, and could be recommended for surgical treatment of distal femur fractures.

Efficacy of Recombinant Human Parathyroid Hormone versus Vertebral Augmentation Procedure on Patients with Acute Osteoporotic Vertebral Compression Fracture

OBJECTIVE

Although widely used in clinical practice, vertebral augmentation procedure (VAP) for osteoporotic vertebral compression fracture (OVCF) is not supported. Recently, the effect of recombinant human parathyroid hormone (1-34) (rhPTH) has been paid great attention for its efficacy in anti-osteoporosis and bone union. This study aims to explore the outcome of rhPTH on acute OVCF and compare it with VAP to clarify its therapeutic advantages.

METHODS

The retrospective study comprised 71 acute OVCF patients from January 2015 to March 2020: 22 received rhPTH treatment (rhPTH group) and 49 underwent VAP (VAP group). The rhPTH group was 15 women and seven men with an average of 76.18 years, and the VAP group were 35 women and 14 men with an average of 73.63 years. The thoracic/lumbar vertebrae were 14/8 in the rhPTH group and 29/20 in the VAP group. The average follow-up period was 14.05 months in the rhPTH group and 13.82 months in the VAP group. The two groups were assessed regarding the visual analog score (VAS), Oswestry Disability Index (ODI), OVCF bone union, bone mineral density (BMD), kyphotic angle (KA), anterior and posterior border height (ABH and PBH, respectively), adverse events and the health-related quality of life assessed by short form-36 health survey scores (SF-36). Categorical variables were analyzed by chi-square test and continuous variables between groups were analyzed by independent samples t-test or Mann-Whitney U test according to the normality.

RESULTS

During the follow-up, the VAS was significantly lower in the rhPTH group than in the VAP group at month 3 (0.39 ± 0.6 vs 0.68 ± 0.651) (p = 0.047), month 6 (0.45 ± 0.60 vs 2.18 ± 1.22) (p < 0.001), and month 12 (0.45 ± 0.60 vs 2.43 ± 1.49) (p < 0.001). At month 12, the ODI was significantly lower in the rhPTH group (18.59 ± 3.33%) than in the VAP group (28.93 ± 16.71%) (p < 0.001). Bone bridge was detected on sagittal computed tomography images of all fractured vertebrae in the rhPTH group. The BMD was significantly higher in the rhPTH group (87.66 ± 5.91 Hounsfield units [HU]) than in the VAP group (68.15 ± 11.32HU) (p < 0.001). There were no significant differences in the changes in KA, ABH, and PBH between groups (all p > 0.05). The incidence of new OVCF was significantly lower in the rhPTH group than in the VAP group (p = 0.042). All scores of SF-36 were significantly higher in the rhPTH group than in the VAP group (all p < 0.05).

CONCLUSION

In acute OVCF patients, rhPTH was better than VAP in increasing spinal BMD to promote OVCF healing, reduce new OVCF, and improve back pain, physical ability, and health-related quality of life.

Does distance from joint line influence complications after distal femur fractures in native and periprosthetic knees?

BACKGROUND

Distal femur fractures are projected to increase in incidence secondary to an aging population and growing utilization of total knee arthroplasty. Surgical management is the standard of care, but optimal treatment for far distal fractures is still unclear. Our study investigates if there are distal femur fractures too distal to be treated with lateral locked plating in periprosthetic fractures.

METHODS

One hundred and ten consecutive patients treated with locked plating for distal femur fractures around a total knee replacement were identified using CPT codes. Fractures were classified by length of the distal fracture segment and Su classification. Complications studied were nonunion, malunion, infection, further fracture related surgery, readmission within 90 days, and mortality within 1 year of surgery. Sixty six fractures met inclusion criteria of 180 days of follow-up or sustaining a complication prior to180 days.

RESULTS

The size of the distal fracture segment and Su classification did not correlate with increased complication rate in periprosthetic distal femur fractures.

CONCLUSIONS

There was no difference between complications following lateral locked plating of distal femur fractures based on the size of the distal fracture segment in periprosthetic fractures. Lateral locked plating is an effective treatment modality for these fractures regardless of how distal the fracture extends.

Machine Learning and Regression Analysis to Model the Length of Hospital Stay in Patients with Femur Fracture

Fractures of the femur are a frequent problem in elderly people, and it has been demonstrated that treating them with a diagnostic–therapeutic–assistance path within 48 h of admission to the hospital reduces complications and shortens the length of the hospital stay (LOS). In this paper, the preoperative data of 1082 patients were used to further extend the previous research and to generate several models that are capable of predicting the overall LOS: First, the LOS, measured in days, was predicted through a regression analysis; then, it was grouped by weeks and was predicted with a classification analysis. The KNIME analytics platform was applied to divide the dataset for a hold-out cross-validation, perform a multiple linear regression and implement machine learning algorithms. The best coefficient of determination (R²) was achieved by the support vector machine (R² = 0.617), while the mean absolute error was similar for all the algorithms, ranging between 2.00 and 2.11 days. With regard to the classification analysis, all the algorithms surpassed 80% accuracy, and the most accurate algorithm was the radial basis function network, at 83.5%. The use of these techniques could be a valuable support tool for doctors to better manage orthopaedic departments and all their resources, which would reduce both waste and costs in the context of healthcare.

Immediate Full Weight-Bearing Versus Partial Weight-Bearing After Plate Fixation of Distal Femur Fractures in Elderly Patients. A Randomized Controlled Trial

Introduction

After surgery for distal femur fractures in elderly patients, weight-bearing is commonly restricted. Immediate non-restrictive weight-bearing might have beneficial effects. There are no randomized studies on the topic. The purpose of this study was to compare the functional outcome between immediate full weight-bearing (FWB) as tolerated and partial weight-bearing (PWB) during the first 8 weeks following plate fixation of distal femur fractures in elderly patients.

Methods

Patients aged 65 years or older with distal femur fractures of AO/OTA types 33 A2, A3, B1, B2, C1, and C2 were included. Exclusion criteria were impaired cognitive function, concomitant injuries, or inability to follow the postoperative regimen. Internal fixation was achieved with an anatomical lateral distal femur plate applied as a strictly bridge-plating construct. The primary outcome measure was the function index of the short musculoskeletal functional assessment (SMFA) after 52 weeks from injury.

Results

Thirty-two patients were randomized to FWB (n = 11) or PWB (n = 21). After 16 and 52 weeks, there were no differences in the mean SMFA function index between FWB and PWB (36 vs 43, P = .42 and 52 vs 40, P = .18, respectively) nor in the mean EuroQol 5-dimension index or range of motion (ROM). Overall, the SMFA function index was higher at 52 weeks compared with before injury (44 vs 30, P = .001) as was the mean bothersome index (37 vs 21, P = .011). There was no clear difference in the occurrence of adverse events between the treatment groups.

Conclusions

There were no differences in functional outcome, adverse events, or ROM between immediate FWB and PWB following plate fixation for a distal femur fracture in elderly patients. A distal femur fracture has a negative effect on the functional status of elderly patients that persists at least up to 1 year following injury.

Cost-effectiveness of fixation versus arthroplasty for geriatric distal femur fractures

INTRODUCTION

Geriatric distal femur fractures are challenging to treat. The high mortality rate associated with a loss of mobility in this population has led some authors to compare distal femur fractures to femoral neck fractures with respect to the importance of rapidly regaining mobility in the geriatric population. Acute distal femur replacement has been advocated by some as a preferred treatment over internal fixation because arthroplasty may facilitate a more rapid return to a patient's baseline mobility level. The purpose of this study was to systematically review the literature on the costs and outcomes of fixation and arthroplasty in the geriatric distal femur fracture population and to employ decision modeling techniques to generate evidence-based treatment recommendations.

METHODS

A systematic literature review of clinical studies published since 2000 was conducted to synthesize the available data on outcomes, reoperation rates, and mortality rates after fixation or arthroplasty for distal femur fractures in patients with an average age greater than 70 years. A Markov decision analysis model was created. Costs, health state utilities, reoperation rates, and mortality rates were derived from the systematic literature review and publicly available data. The model was analyzed via probabilistic statistical analysis as well as sensitivity analyses with a willingness-to-pay threshold set at $100,000 per QALY and a 5-year time horizon.

RESULTS

From a US societal perspective, fixation was associated with a greater quality of life benefit (2.44 QALYs vs. 2.34 QALYs) and lower cost ($25,556 vs. $65,536) compared with distal femur replacement for geriatric distal femur fractures. Probabilistic analysis demonstrated that 82 in 100 model outcomes favored fixation over arthroplasty and 18 in 100 model outcomes favored distal femur replacement. Sensitivity analyses demonstrated that this result was robust to small deviations in the cost and functional outcome variables in the model.

CONCLUSION

Compared to distal femur replacement, ORIF is likely to be a more cost-effective treatment for distal femur fractures in the geriatric patient population, though this recommendation is tempered by the relatively low quality of evidence available on the comparative functional outcomes of these treatments.

Hybrid locked medial plating in dual plate fixation optimizes the healing of comminuted distal femur fractures: A retrospective cohort study

OBJECTIVES

Dual plate fixation has been reported to be effective in the treatment of comminuted distal femur fractures (DFFs). However, optimized use of the medial plate and screws is less studied. This study aimed to evaluate the effect of a hybrid configuration of the medial plate in dual plate fixation of comminuted DFFs in promoting fracture healing.

MATERIALS AND METHODS

We retrospectively analyzed 62 patients with comminuted DFFs (AO/OTA 33-A3/33-C2/33-C3) from January 2015 to March 2020, who were either fixed with lateral locked plating augmented with hybrid locked medial plating (LP-HLMP, n = 32) or lateral locked plating (LLP, n = 30) alone. Specifically, compression screws were applied in the middle of the medial plate and flanked by locking ones at both ends. Baseline characteristics, radiological and clinical outcomes were reviewed and analyzed. Multivariate logistic regression analysis was used to identify predictive factors for early fracture healing, and risk factors for delayed union/nonunion.

RESULTS

Demographics including age, gender, smoking, diabetes, and injury mechanism were comparable between the two groups. Reduction quality was better in the LP-HLMP group (p < 0.001). Although the LP-HLMP group experienced longer duration of surgery (125 min vs. 100 min, p < 0.001), sign of healing at 3 months was more obvious in this group (75%, 24/32 vs. 30%, 9/30; p < 0.001). The LP-HLMP group also presented with higher union rate (93.8%, 30/32 vs. 56.7%, 17/30; p = 0.001) and lower reoperation rate (0%, 0/32 vs. 13.3%, 4/30; p = 0.049). Kolment score showed no statistical significance between the two groups. Multivariate analysis revealed that younger age (< 60 years) (OR 5.99, 95%CI 1.16 - 31.03; p = 0.001) and LP-HLMP fixation (OR 45.90, 95% CI 4.78 - 440.56; p = 0.001) predict early healing; while smoking (OR 17.80, 95% CI 2.41 - 131.49; p = 0.01) and fracture translation (OR 3.49, 95% CI 1.46 - 8.32; p = 0.01) were identified as risk factors for delayed union/nonunion.

CONCLUSION

Hybrid locked medial plating in this study favors the healing of comminuted DFFs and reduces reoperation. Additionally, smoking and suboptimal reduction (translation) predict delayed union/nonunion.

Lean Six Sigma Approach for Reducing Length of Hospital Stay for Patients with Femur Fracture in a University Hospital

Surgical intervention within 48 h of hospital admission is the gold standard procedure for the management of elderly patients with femur fractures, since the increase in preoperative waiting time is correlated with the onset of complications and longer overall length of stay (LOS) in the hospital. However, national evidence demonstrates that there is still the need to provide timely intervention for this type of patient, especially in some regions of central southern Italy. Here we discuss the introduction of a diagnostic–therapeutic assistance pathway (DTAP) to reduce the preoperative LOS for patients undergoing femur fracture surgery in a university hospital. A Lean Six Sigma methodology, based on the DMAIC cycle (Define, Measure, Analyze, Improve, Control), is implemented to evaluate the effectiveness of the DTAP. Data were retrospectively collected and analyzed from two groups of patients before and after the implementation of DTAP over a period of 10 years. The statistics of the process measured before the DTAP showed an average preoperative LOS of 5.6 days (standard deviation of 3.2), thus confirming the need for corrective actions to reduce the LOS in compliance with the national guidelines. The influence of demographic and anamnestic variables on the LOS was evaluated, and the impact of the DTAP was measured and discussed, demonstrating the effectiveness of the improvement actions implemented over the years and leading to a significant reduction in the preoperative LOS, which decreased to an average of 3.5 days (standard deviation of 3.60). The obtained reduction of 39% in the average LOS proved to be in good agreement with previously developed DTAPs for femur fracture available in the literature.

Incidence of nonunion after surgery of distal femoral fractures using contemporary fixation device: a meta-analysis

PURPOSE

Nonunion is the most frequent cause of reoperation and is associated with high morbidity after distal femur fracture (DFF). We examined the rates of nonunion requiring reoperation after fixation for DFF using a locking compression plate (LCP) or retrograde intramedullary nail (RIMN).

METHODS

We included four studies comparing LCP and RIMN and 38 single-cohort studies reporting LCP or RIMN. In total, 2156 femurs were included and 166 non-unions were detected. We conducted a pair-wise meta-analysis (with a fixed-effects model) on the four comparative studies and a proportional meta-analysis on the 38 articles to estimate the nonunion rate. We performed sensitivity analysis by comparing studies using LCP with less invasive surgical systems (LISS) with those that used RIMN.

RESULTS

The pairwise meta-analysis showed a similar nonunion rate between the groups [odds ratio: 1.02; 95% confidence interval (CI) 0.94-1.11, p = 0.633]. According to proportional meta-analysis, the pooled prevalence of nonunion was 5% (95% CI 4-7) totally, 6% (95% CI 4-8) in the LCP group, and 4% (95% CI 2-6) in the RIMN group (heterogeneity: p = 0.105). According to the sensitivity analysis, there was no difference in the union rate. The pooled prevalence of nonunion from sensitivity analysis was 4 % (95% CI, 3-5); it was 4% (95% CI, 3-6) in LCP with LISS and was 4% (95% CI, 2-6) in RIMN group (heterogeneity: p = 0.941).

CONCLUSION

Approximately 5% of patients who underwent LCP or RIMN fixation developed nonunion. Therefore, LCP and RIMN are effective DFF techniques and mastering one of them is essential.

Lean Six Sigma approach to reduce LOS through a diagnostic-therapeutic-assistance path at A.O.R.N. A. Cardarelli

Purpose

The rise of the mean age incremented the occurrence of femur fractures with respect to the past, leading thus to serious consequences, as regards morbidity and socio-economic impact. The direction of the A.O.R.N. Cardarelli of Naples has introduced a DTAP whose aim was the reduction of LOS. The paper aims to discuss this issue.

Design/methodology/approach

The aim of this paper is to analyze the introduction of DTAP, employing Lean Thinking and Six Sigma methodology based on the DMAIC cycle. To evaluate the effectiveness of DTAP, two groups of patients have been observed for 14 months (before and after the implementation of DTAP).

Findings

Statistical tests were performed on the groups and graphics were provided to visualize the decrease of LOS (29.9 per cent). The overall population was also divided in subgroups according to six variables potentially influencing LOS.

Research limitations/implications

Authors considered six variables of influences; yet, others could be taken into account in the future.

Practical implications

The decrease of costs due to the management of elderly patients with femur fracture, the optimization of care processes in hospitals and a faster recovery for patients is the tangible contribute of DTAP.

Originality/value

The implementation of DTAP allowed the hospital to obtain a significant reduction of LOS with a consequently decrease of costs alleviating the hospital and the society from the socio-economic burden and the morbidity of this pathology.

Circular external fixation as definitive treatment for open or comminuted femoral fractures: Radiologic and functional outcomes

INTRODUCTION

Ring external fixation can be a definitive treatment of high energy femoral fractures. A retrospective analysis of outcomes is presented.

MATERIALS AND METHODS

23 patients with open or comminuted femoral fractures treated with circular external fixators were included. Mean age was 33 (range, 13-81) years. Lesions were classified according to AO/ASIF. 12 fractures were open. Mean follow up period has been 26.3, (range 20-144) months. The results were assessed according to the modified criteria of Association for the Study and Application of the Method of Ilizarov. Knee functional results were assessed with Hospital for Special Surgery knee scoring system.

RESULTS

22 fractures united primarily, one showed nonunion. Knee stiffness developed in two patients. No patient had deep pin tract infection. Bone results were quoted as excellent, good, fair and poor in 19, 1, 1 and 2. The functional results were excellent, good, and fair in 16, 6, and 1, on the basis of ASAMI criteria. Mean HSS knee score has been 90.1 (range 60-100).

CONCLUSION

Circular external fixation can achieve reliable rates of union and good to excellent functional outcome in open or comminuted femoral fractures. A strict rehabilitation protocol was effective in preserving knee joint function.

Functional outcome of open distal femoral fractures managed with lateral locking plates

PURPOSE

This prospective study evaluated the functional outcome and union rates of open distal femoral fractures managed with anatomic lateral locking plates.

METHODS

Thirty-four patients with open distal femur fractures with mean age of 40.8 years (range 20-65 years) were included in the study. Patients with Gustilo-Anderson grade IIIC fractures and those managed with non-locking modalities were excluded. In total, 70.6% (n = 24) of the fractures were Type IIIA and 55.9% (n = 19) were AO/OTA Type C3 fractures. In 23.5% (n = 8) patients, knee spanning external fixator was applied initially before definitive fixation. Patients were followed up for a mean period of 11.6 months (range 8-22.5 months). Functional outcome was evaluated using Sanders Score.

RESULTS

In the primary plating group, 69.2% (n = 18) fractures united at an average of 27 weeks (range 21-40 weeks), while eight patients had non-union and required bone grafting. All eight patients with external fixator underwent lateral locked plating with bone grafting and united at an average time of 39.6 weeks (range 31-50 weeks). There were two cases each of infection and screw failure. The final mean Sanders Score was 30.1 (range19-40) with 73.5% (n = 25) patients having good to excellent functional outcomes.

CONCLUSIONS

Lateral locking plates offer excellent stability to allow fracture union in open distal femoral fractures. A proactive approach to identify and manage potential healing difficulties is advisable to promote bone healing.

Outcomes of distal femur fractures treated with the Synthes 4.5 mm VA-LCP Curved Condylar Plate

PURPOSE

Given the recent controversy in the literature and the alarming reports of early mechanical failure associated with the use of the Synthes 4.5 mm VA-LCP Curved Condylar Plate in acute distal femur fractures, the goal of our study was to examine the outcomes and mechanical failure rates of this implant in a larger patient population.

METHODS

Patients 18 years of age and older who underwent plate fixation of their acute distal femoral fracture using the Synthes 4.5 mm VA-LCP Curved Condylar Plate were included in this retrospective study. The study data was collected through a retrospective chart review and review of the existing radiographic studies. Primary outcome measure was mechanical hardware failure while secondary outcome measures included nonunion, malunion, and medical and surgical complications.

RESULTS

A total of 74 patients (77 fractures) were included in this study. The fractures were classified according to the OTA/AO classification as 33-A2 (n = 6), 33-A3 (n = 19), 33-C1 (n = 5), 33-C2 (n = 25), and 33-C3 (n = 22). Thirty-two out of 77 fractures presented as open fractures (41.6%). A mechanical failure was observed in 7 patients (9.1%). Twenty additional patients needed a re-operation of the surgical site including two nonunion repairs, one malunion repair, 15 staged treatments of traumatic segmental bone defects, and two soft tissue debridements.

CONCLUSIONS

In our experience, the Synthes 4.5 mm VA-LCP Curved Condylar Plate is a safe and effective implant with a relatively low mechanical failure rate.

Fixation of periprosthetic or osteoporotic distal femoral fractures with locking plates: a pilot randomised controlled trial

Introduction

We hypothesised that the use of a polyaxial locking plate design offers the same clinical benefits as a monoaxial locking plate system following distal femoral osteoporotic/periprosthetic fracture fixation.

Method

A multicentre prospective randomised pilot trial was conducted. Inclusion criteria were patients over 60 years with a displaced osteoporotic or periprosthetic distal femoral fracture. Details documented included time to union, complications, reinterventions and functional outcomes according to the Oxford knee score and EuroQol EQ-5D. Analysis of factors influencing an early fracture healing response was performed between those with clear features of radiological callus formation at three months. Statistical analysis was performed using a logistic regression model with multiple covariates assessed for each plate system (1:1 ratio) over a follow-up period of one year.

Results

Forty patients (34 females) with a mean age of 77 (60–99) were recruited. Four patients deceased within the first six months. Twenty-five patients united by the six month follow-up. Six more patients progressed to union between six and nine months. Five patients developed non-union (two patients had implant failure; one in each group) and all underwent revision surgery. Malunion was evident in two cases, one with 15° of valgus (monoaxial plate), and one with 12° of recurvatum (polyaxial plate). Between the two plate systems, statistical analysis revealed no significant differences in most of the recorded parameters. Radiological features of early bone healing were present when the surgical approach was smaller (p = 0.015), and when a greater working length of the bridging plate was present (p = 0.016).

Conclusion

Both plate systems demonstrated good union rates and limited implant related complications. Good reduction, mechanically sound construct and respect of the local fracture biology was more important than the particular plate design characteristics.

Electronic supplementary material

The online version of this article (10.1007/s00264-018-4061-1) contains supplementary material, which is available to authorized users.