The Occurrence of Triple Catalytic Characteristics of Yeast Lipases and Their Application Prospects in Biodiesel Production from Non-Edible Jatropha curcas Oil in a Solvent-Free System

Bioconversion of Liquid and Solid Lipid Waste by Yarrowia lipolytica Yeast: A Study of Extracellular Lipase Biosynthesis and Microbial Lipid Production

This study investigated the capabilities of Yarrowia lipolytica strains to grow in media with different hydrophobic wastes from the meat industry. The yeast growth, cellular lipid accumulation, production of lipases, and degree of utilization of liquid and solid lipid wastes were studied in shaken cultures in media with organic and inorganic nitrogen sources. The effects of the type of waste, initial concentration of carbon source, Yarrowia strain, and inoculum size were investigated in two experimental sets using the Latin Square 5 × 5 design method. Post-frying rapeseed oil from chicken frying was selected as the carbon source to promote biomass growth. In contrast, the solid lipid fraction from meat broths promoted efficient lipid accumulation and yeast lipolytic activity. An initial concentration of the carbon source at 8% m/v stimulated efficient lipid biosynthesis and lipase production, while 2.5% v/v inoculum provided optimal conditions for the growth and utilization of hydrophobic substrates. No significant differences were observed in the particle dispersion of the liquid and solid wastes in the culture media (span = 2.51-3.23). The maximum emulsification index (62%) was observed in the culture of the Y. lipolytica KKP 323 strain in the medium with post-frying rapeseed oil from chicken frying, which was correlated with biosurfactant synthesis. It was concluded that the type of waste, its structure, and its composition affected various physiological yeast responses.

Promoting Magnusiomyces spicifer AW2 Cell-Bound Lipase Production by Co-culturing with Staphylococcus hominis AUP19 and Its Application in Solvent-Free Biodiesel Synthesis

Yeast-bacterium interaction has recently been investigated to benefit the production of cell-bound lipases (CBLs). Staphylococcus hominis AUP19 supported the growth of Magnusiomyces spicifer AW2 in a palm oil mill effluent (POME) medium to produce CBLs through a bioremediation approach, including oil and grease (O&G) and chemical oxygen demand (COD) removals. This research used the yeast-bacterium co-culture to optimize CBLs and cell biomass (CBM) productions through bioremediation using the statistical Plackett-Burman design and response surface methodology-central composite design. The CBLs were finally applied in biodiesel synthesis. The CBM of 13.8 g/L with CBLs activity at 3391 U/L was achieved after incubation at room temperature (RT, 30 ± 2 °C) for 140 h in 50% POME medium, pH 7.0, containing 1.23% (w/v) ammonium sulfate. Bacterium promoted yeast growth to achieve bioremediation with 87.9% O&G removal and 84.5% COD removal. Time course study showed that the CBLs activity was highest at 24 h cultivation (4103 U/L) and retained 80% and 60% of activities at 4 °C and RT after 5 weeks of storage. The CBLs application successfully yielded 77.3% biodiesel from oleic acid (esterification) and 86.4% biodiesel from palm oil (transesterification) within 72 h in solvent-free systems. This study highlights that yeast-bacterium co-culture and POME should receive more attention for potential low-cost CBLs production through bioremediation, i.e., O&G and COD removals, while the CBLs as biocatalysts are promising for significant contribution to an effective strategy for economic green biodiesel production.

Scale-up Lipase Production and Development of Methanol Tolerant Whole-Cell Biocatalyst from Magnusiomyces spicifer SPB2 in Stirred-Tank Bioreactor and Its Application for Biodiesel Production

This study aimed to economically develop the yeast whole-cell biocatalyst from the lipase-secreting Magnusiomyces spicifer SPB2 to serve green biodiesel production. The scaled-up productions of lipases were optimized using a 5-L stirred-tank bioreactor. The maximum extracellular lipase and cell-bound lipase (CBL) yields of 1189.65 U/L and 5603.74 U/L were achieved at 24 h and 60 h, respectively, in the modified IMY medium (pH 5.0) containing 2% of soybean oil as a carbon source and 0.2% Gum Arabic as an emulsifying agent. The optimized cultivation was initiated with an inoculum size of 1 × 107 cells/mL and conducted under an aeration rate of 0.75 vvm with an agitation speed of 400 rpm. The obtained whole-cell biocatalyst of M. spicifer SPB2 was applied to catalyze the transesterification reaction using palm oil and methanol as substrates. The greatest yield of 97.93% fatty acid methyl ester (FAME) was reached at 72 h using a palm oil/methanol ratio of 1:7, indicating high methanol stability of the biocatalyst. Moreover, substrate homogenization accelerated the reaction to achieve FAME production of 97.01% at 48 h and remained stable afterwards. Without homogenization, the highest FAME of 98.20% was obtained at 60 h. The whole-cell biocatalyst prepared from lipase-secreting M. spicifer SPB2 at an up-scaled level greatly enhanced efficiency and feasibility for commercial biodiesel production through a green conversion process.

Production of biodiesel from Caulerpa racemosa oil using recombinant Pichia pastoris whole cell biocatalyst with double displayed over expression of Candida antartica lipase

In this study, Caulerpa racemosa oil was used to produce biodiesel by recombinant Pichia pastoris displaying bound (rPp-BL) and secretory lipase (rPp-SL). Collected algae was pre-treated using ultrasonication, microwave and solvent extraction. Defatted C. racemosa was subjected to dilute acid treatment to obtain algal biomass hydrolysate. Both rPp-BL and rPp-SL were cultivated in algal biomass hydrolysate and glycerol. Surfactant treatment was performed on rPp-BL. Screening and optimization of variables were performed for biodiesel production using Plackett Burman design and central composite design, respectively. About 10.64 % (w/w) of algal oil was extracted from C. racemosa. Both rPp-BL and rPp-SL effectively utilized C. racemosa biomass hydrolysate and glycerol. rPp-SL combined with triton X (1.0 % w/v) treated rPp-BL for 3 min improved lipase activity. Methanol to oil ratio, combined whole cell biocatalyst and temperature were significant factors. Under optimum conditions, biodiesel yield reached about 93.64 % after 30 h using developed whole cell biocatalyst.

Statistical Optimization for Cost-Effective Production of Yeast-Bacterium Cell-Bound Lipases Using Blended Oily Wastes and Their Potential Applications in Biodiesel Synthesis and Wastewater Bioremediation

Oily wastes have been widely used to produce lipases, but there is insufficient knowledge on their use to efficiently produce cell-bound lipases (CBLs). This research aimed to optimize yeast–bacterium CBLs production using blended oily wastes by statistical optimization and their potential applications in biodiesel production and wastewater bioremediation. The co-culture of Magnusiomyces spicifer AW2 and Staphylococcus hominis AUP19 produced CBLs as high as 4709 U/L with cell biomass of 23.4 g/L in a two-fold diluted palm oil mill effluent (POME) added by 2.08% (v/v) waste frying oil, 1.72.0% (w/v) ammonium sulfate, 0.1% (w/v) Gum Arabic as an emulsifier (initial pH at 7.0) within 24 h. The CBLs were successfully applied as whole-cell biocatalysts to produce biodiesel through esterification and transesterification with 76% and 87% yields, respectively. Direct application of CBLs for bioremediation of heat-treated various POME concentrations achieved 73.3% oil and grease removal and 73.6% COD removal within 3 days. This study has shown that the blended oily wastes medium was suitable for low-cost production of yeast–bacterium CBLs and their potential applications in solvent-free biodiesel production and wastewater bioremediation. These strategies may greatly contribute to economical green biofuel production and waste biotreatment.