Biodegradation of Methyl Orange by alginate-immobilized Aeromonas sp. in a packed bed reactor: external mass transfer modeling

Biological treatment of methyl orange dye and textile wastewater using halo-alkaliphilic bacteria under highly alkaline conditions

As the textile wastewater is highly saline and has high pH it is important to employ extremophilic microbes to survive in harsh conditions and provide effective bioremediation of textile dyes. This study aims to find a sustainable solution for dye removal by investigating the potential of an indigenously isolated bacterium, Nesterenkonia lacusekhoensis EMLA3 (halo-alkaliphilic) for treatment of an azo dye, methyl orange (MO) and textile effluent. MO dye decolorization studies were conducted using mineral salt media (MSM) by varying incubation time (0-120 h), initial dye concentration (50-350 mg/L), pH (7.0-12.0), inoculum dose (3-10%), agitation (stationary, 100 rpm and 200 rpm), and temperature (20-55 °C). Dye removal by the bacterium for 50 mg/L of dye was > 97.0% within 72 h of incubation at pH 11.0 in stationary condition. Bacterium had excellent reusability i.e. > 97% dye removal for up to 5 cycles. Moreover, bacterium has the potential for co-removal of chromium (VI) (3.5-28 mg/L), and also almost complete dye removal in presence of high amount of NaCl. Liquid chromatography-mass spectrometry showed degradation as the mechanism of dye removal. Application of the bacterium to MO dye spiked real textile wastewater showed excellent dye removal. Phyto-toxicity assessment conducted on Vigna radiata and Triticum aestivum seeds, showed 100% germination of biotreated textile wastewater indicating its reuse potential.

Adsorption and biodegradation of the azo dye methyl orange using Ralstonia pickettii immobilized in polyvinyl alcohol (PVA)-alginate-hectorite beads (BHec-RP)

Biological methods are widely used to treat dye waste, particularly methyl orange (MO) dye. The importance of MO degradation stems from its classification as a toxic dye. Within the scope of this research, successful bio-decolorization of MO was achieved through the use of Ralstonia pickettii bacteria immobilized in a PVA-alginate-hectorite matrix (BHec-RP). The optimum conditions for the degradation were observed at a composition of PVA (10%), hectorite (1%), static incubation, 40 °C, and pH 7. Subsequently, the adsorption kinetics of BHec-RP (dead cells) as well as the degradation kinetics of BHec-RP (live cells) and MO using free R. pickettii cells were evaluated. The decolorization of MO using BHec-RP (dead cells) is an adsorption process following pseudo-first-order kinetics (0.6918 mg g-1 beads) and occurs in a monolayer or physical process. Meanwhile, the adoption of BHec-RP (live cells) and free R. pickettii cells shows a degradation process under pseudo-first-order kinetics, with the highest rates at an initial MO concentration of 50 mg L-1 being 0.025 mg L-1 h-1 and 0.015 mg L-1 h-1, respectively. These results show that the immobilization system is superior compared to free R. pickettii cells. Furthermore, the degradation process shows the inclusion of several enzymes, such as azoreductase, NADH-DCIP reductase, and laccase, presumed to be included in the fragmentation of molecules. This results in five fragments based on LC-QTOF/MS analysis, with m/z values of 267.12; 189.09; 179.07; 169.09; and 165.05.

A synergistic approach combining Adsorption and Biodegradation for effective treatment of Acid Blue 113 dye by Klebsiella grimontii entrapped Graphene Oxide-Calcium Alginate Hydrogel Beads

This study investigated the degradation of Acid Blue 113 (AB 113) dye using Klebsiella grimontii entrapped Graphene Oxide-Calcium Alginate Hydrogel beads (KG-GO-CA) in a Fluidized Bed Bioreactor (FBBR) under varying inlet loading rates. The minimum fluidization velocity of the KG-GO-CA hydrogel beads in FBBR was found to be 0.15 mm/s. The KG-GO-CA beads showed a maximum removal efficiency of 94.6% at an inlet flow rate of 20 mL/h over 15 days. Reusability studies indicated a removal efficiency of 70.6 ± 2.5% for AB 113 after the 12th cycle. Langmuir adsorption isotherm showed the best fit (R2 = 0.98724) with model parameters of Qm (203.83 mg/g) and Ki (0.0101 L/g). The study also confirmed that treated wastewater was more environmentally safe for domestic and commercial uses than untreated wastewater. The research highlights the potential use of KG-GO-CA hydrogel beads for removing dyes from wastewater.

Biodegradation of Congo red dye in a moving bed biofilm reactor: Performance evaluation and kinetic modeling

The biodegradation of Congo red dye was performed using polyurethane foam-polypropylene immobilized Bacillus sp. MH587030.1 in a moving bed biofilm reactor (MBBR). The central composite design (CCD) based response surface methodology (RSM) was used to optimize the process parameters; pH, Congo red concentration, and media filling ratio, and optimum conditions were observed to be 7.0, 50 mg/L, and 45%, respectively in batch MBBR. At optimum condition, MBBR was operated in continuous mode at different flow rates (25-100 mL/h) over a period of 564 h. The maximum removal efficiency (RE) and elimination capacity (EC) were obtained as 95.7% and 57.6 mg/L·day, respectively under steady-state. The kinetics of Congo red biodegradation at various flow rates were evaluated by a modified Stover-Kincannon model, and kinetic constants; K_B and U_max were found to be 0.253 g/L·day and 0.263 g/L·day, respectively.

Characteristic Assessment of Diesel-degrading Bacteria Immobilized on Natural Organic Carriers in Marine Environment: the Degradation Activity and Nutrient

Oil spill has led to severe environmental and ecological problems. Due to the harsh environmental conditions, the bioremediation technology is not successfully used to remedy the oil spill in marine environment. In this study, immobilization technology was used to immobilize bacteria on natural organic carriers (i.e., wood chips and maize straw). The higher surface area of in wood chips leads to larger biomass density (0.0242 gVSS/g) than that of maize straw of 0.0097 gVSS/g carrier. Compared with biodegradation efficiency of free bacteria (44.79%), the immobilized bacteria on wood chips and maize straw reached to 73.39% and 52.28%, respectively. The high biological activity of the immobilized bacteria can be also explained by nutrients, such as TN (total nitrogen) and TP (total phosphorus), released from wood chips and maize straw, which was 8.83 mg/g and 5.53 mg/g, 0.0624 mg/g and 0.0099 mg/g, respectively.

3-Chloro-1,2-propanediol biodegradation by Ca-alginate immobilized Pseudomonas putida DSM 437 cells applying different processes: mass transfer effects

3-Chloro-1,2-propanediol (3-CPD) biodegradation by Ca-alginate immobilized Pseudomonas putida cells was performed in batch system, continuous stirred tank reactor (CSTR), and packed-bed reactor (PBR). Batch system exhibited higher biodegradation rates and 3-CPD uptakes compared to CSTR and PBR. The two continuous systems (CSTR and PBR) when compared at 200 mg/L 3-CPD in the inlet exhibited the same removal of 3-CPD at steady state. External mass-transfer limitations are found negligible at all systems examined, since the observable modulus for external mass transfer Ω ≪ 1 and the Biot number Bi > 1. Intra-particle diffusion resistance had a significant effect on 3-CPD biodegradation in all systems studied, but to a different extent. Thiele modulus was in the range of 2.5 in batch system, but it was increased at 11 when increasing cell loading in the beads, thus lowering significantly the respective effectiveness factor. Comparing the systems at the same cell loading in the beads PBR was less affected by internal diffusional limitations compared to CSTR and batch system, and, as a result, exhibited the highest overall effectiveness factor.