Magnetic field as promoter of growth in outdoor and indoor assays of Chlorella fusca

Post-Treatment of CO₂ Emissions With Microalgae: Magnetic Field-Induced Improvements in an AirLift Photoreactor

Atmospheric pollution from volatile organic compounds (VOCs) and rising global temperatures due to greenhouse gases (GHGs) emissions, such as carbon dioxide (CO2) pose significant threats to air quality and public health. Coupled biological systems can mitigate VOC emissions, generating CO2, which is then assimilated by microalgae. Static magnetic field (SMF) stimulation has been shown to enhance microalgal growth and CO2 fixation. This study evaluated the impact of SMF on CO2 fixation in an airlift photoreactor (ARL) following VOCs treatment in a semi-continuous stirred tank reactor (S-CSTR) processing toluene vapors. The ARL was exposed to SMF at 45 mT for 6, 4, and 2 h d-1. Results demonstrated a 96% increase in CO2 capture after 4 h of exposure, while removing 45% of the remanent toluene. The highest biomass increase (12%) occurred after 6 h of exposure, whereas total chlorophyll content peaked at 18.4 mg L-1 under 4 h of SMF, compared with 6.8 mg L-1 in the control. Therefore, 4 h exposure at 45 mT was identified as the optimal condition, balancing VOCs reduction, CO2 mitigation, and high pigment production. Microalgal cultures under SMF present a promising and versatile approach for air pollution control and carbon valorization, offering potential economic benefits through biomass applications and supporting circular economy initiatives.

Production of biomass and biomolecules in Limnospira indica PCC 8005 cultivation under magnetic fields and polymeric nanofibers

Researchers often apply physical, chemical, or biological stresses to cyanobacteria cultivation to enhance biomass production by triggering cellular adaptation mechanisms, increasing growth or boosting target compound synthesis. Static magnetic fields (SMF) offer a non-toxic, cost-effective way to modulate microalgal growth, alter biomass composition, and promote metabolite production. Polymeric nanofibers (Nano) function as a physical barrier in cultivation, while monoethanolamine (MEA) acts as a chemical absorbent, reducing CO₂ loss and enhancing biofixation. This study investigated the effects of SMF and nanofibers on the biomass yield and molecular composition of Limnospira indica PCC 8005. The combined SMF and Nano treatment achieved the highest biomass yield (5.87 ± 0.06 g L⁻¹), a 28 % increase compared to the control. SMF application increased protein content by 16 % but reduced carbohydrate levels by 73 % relative to the nanofiber-only treatment (39.58 ± 0.98 % ww⁻¹). Exopolysaccharide (EPS) produced under the SMF+NanoMEA treatment contained 39.9 % uronic acid, while the Nano-only treatment had the highest sulphate content (8.4 %) but the lowest uronic acid concentration (25.4 %). The EPS were identified as acidic, sulphated polysaccharides. SMF and nanofibers significantly enhances biomass production, alters the carbohydrate and protein proportions in biomass, and influences the composition of sugars, acids, and sulphate in exopolysaccharides.

Extracellular lipase production by Yarrowia lipolytica under magnetic fields

This study aimed at estimating cultivation conditions to enable Yarrowia lipolytica NNRL Y-1095 to produce extracellular lipase and at evaluating the influence of magnetic fields (MF) on the lipase production and on its catalytic conditions. Culture conditions of carbon sources and surfactant defined to produce extracellular lipase were 10 g L-1 glucose, 15 g L-1 olive oil and 2 g L-1 Triton X-100. The highest lipase activity (34.8 U mL-1) was reached after 144 h when MFs were applied from 72 to 144 h of culture. It corresponds to an increase of 287.5% by comparison with the highest lipase activity in the control culture. MF application from 72 to 144 h did not change the optimal temperature of lipase, which was 37 °C, by comparison with the control. However, the optimal pH of the control was 7.0 while the one of lipase produced with MF was 8.0. Findings highlighted that the presence of MFs led to increase in synthesis of lipase by Y. lipolytica, with changes in the catalytic profile. This is one of the first studies of MF application to Y. lipolytica NRRL Y-1095 cultures to produce lipase.

Magnetic Fields as Inducers of Phycobiliprotein Production by Synechococcus elongatus PCC 7942

This study aimed to analyze the effect of magnetic field (MF) application on the metabolism of Synechococcus elongatus PCC 7942. Concentrations of biomass, carbohydrate, protein, lipid, and photosynthetic pigments (chlorophyll-a, C-phycocyanin, allophycocyanin and phycoerythrin) were determined. In cultures with MF application (30 mT for 24 h d^-1), there were increases of 47.5% in total protein content, 87.4% in C-phycocyanin, and 332.8% in allophycocyanin contents, by comparison with the control. Allophycocyanin is the most affected pigment by MF application. Therefore, its biosynthetic route was investigated, and four genes related to its synthesis were found. However, the analysis of the gene expression showed no statistical differences from the control culture, which suggests that induction of such genes may occur soon after MF application with consequent stabilization over time. MF application may be a cost-effective alternative to increase production of compounds of commercial interest by cyanobacteria.

Magnetic fields as inducer of glutathione and peroxidase production by Saccharomyces cerevisiae

Glutathione (GSH) and peroxidase (POD) are biomolecules of interest in the global market; thus, it is desirable to seek ways to increase their production. Magnetic field (MF) application is one of the technologies used in cultivation that has shown promising results to increase bioproducts. Therefore, this study aimed at evaluating the influence of MFs on GSH and POD production by Saccharomyces cerevisiae ATCC 7754. Different periods of MF application (35 mT) were evaluated over 72 h. The highest GSH production was reached in 48 h of cultivation in assays MF 0-24 (155.32 ± 9.12 mg L-1) and MF 0-72 (149.27 ± 3.62 mg L-1), which showed an increase of 121.9 % and 113 %, respectively, by comparison with the control without any MF application. The highest POD activity was achieved when MFs were applied throughout the culture (36.31 U mg-1) and POD productivity of 0.72 U mg-1 h-1. MF application throughout cultivation proved to be a promising strategy since all responses increased, i.e., GSH concentration, GSH productivity, POD activity, and POD productivity increased 113.7 %, 113 %, 20.4 %, and 28.6 %, respectively. This study is one of the first to consider MFs as a viable and low-cost alternative to produce GSH and POD in bioprocesses.

The Static Magnetic Field Regulates the Structure, Biochemical Activity, and Gene Expression of Plants

The purpose of this paper is to review the scientific results and summarise the emerging topic of the effects of statistic magnetic field on the structure, biochemical activity, and gene expression of plants. The literature on the subject reports a wide range of possibilities regarding the use of the magnetic field to modify the properties of plant cells. MFs have a significant impact on the photosynthesis efficiency of the biomass and vigour accumulation indexes. Treating plants with SMFs accelerates the formation and accumulation of reactive oxygen species. At the same time, the influence of MFs causes the high activity of antioxidant enzymes, which reduces oxidative stress. SMFs have a strong influence on the shape of the cell and the structure of the cell membrane, thus increasing their permeability and influencing the various activities of the metabolic pathways. The use of magnetic treatments on plants causes a higher content of proteins, carbohydrates, soluble and reducing sugars, and in some cases, lipids and fatty acid composition and influences the uptake of macro- and microelements and different levels of gene expression. In this study, the effect of MFs was considered as a combination of MF intensity and time exposure, for different varieties and plant species. The following article shows the wide-ranging possibilities of applying magnetic fields to the dynamics of changes in the life processes and structures of plants. Thus far, the magnetic field is not widely used in agricultural practice. The current knowledge about the influence of MFs on plant cells is still insufficient. It is, therefore, necessary to carry out detailed research for a more in-depth understanding of the possibilities of modifying the properties of plant cells and achieving the desired effects by means of a magnetic field.

Update on the application of magnetic fields to microalgal cultures

Several studies have shown that any magnetic field (MF) applied to microalgae modifies its cultivation conditions and may favor biomolecule production since it interacts with the microorganisms and affect their growth. As a result, there are changes in concentrations and compositions of biomass and biomolecules. This review aims at updating MF applications to microalga cultures that were reported by studies conducted in the last 5 years. It shows the main studies that reached positive results of carbohydrate, lipid, protein and pigment production. Effects of MFs may be positive, negative or null, depending on some factors, such as intensity, exposure time, physiological state of cells and application devices. Therefore, this review details cultivation conditions used for reaching high concentration of biomolecules, explains the action of MFs on microalgae and describes their applicability to the biorefinery concept.

Magnetic Field Action on Limnospira indica PCC8005 Cultures: Enhancement of Biomass Yield and Protein Content

The effects of a magnetic field (MF) on the cyanobacteria Limnospira indica PCC 8005 growth rate and biomass composition were investigated. A device to apply the MF during the cultivation was built and the cyanobacteria were exposed to a steady 11 mT transverse MF. The growth increased with MF application, and when it was applied for 1 h per day, 123% more biomass was produced than in the control group. The protein content in the biomass cultured under this condition increased, achieving 60.4 w/w, while the Chl-a increased by 326%. The MF application for 1 h per day was found to be more efficient than when applied continuously for 24 h per day, in addition to being more economical and sustainable. This study showed an inexpensive and non-toxic way to enhance biomass concentration, leading to amounts more than 100% higher than those obtained in the control group. Furthermore, the high protein content in the biomass gave us several possibilities to increase the nutritional value of food.

Microalgae-based carbohydrates: A green innovative source of bioenergy

Microalgae contribute significantly to the global carbon cycle through photosynthesis. Given their ability to efficiently convert solar energy and atmospheric carbon dioxide into chemical compounds, such as carbohydrates, and generate oxygen during the process, microalgae represent an excellent and feasible carbohydrate bioresource. Microalgae-based biofuels are technically viable and, delineate a green and innovative field of opportunity for bioenergy exploitation. Microalgal polysaccharides are one of the most versatile groups for biotechnological applications and its content can be increased by manipulating cultivation conditions. Microalgal carbohydrates can be used to produce a variety of biofuels, including bioethanol, biobutanol, biomethane, and biohydrogen. This review provides an overview of microalgal carbohydrates, focusing on their use as feedstock for biofuel production, highlighting the carbohydrate metabolism and approaches for their enhancement. Moreover, biofuels produced from microalgal carbohydrate are showed, in addition to a new bibliometric study of current literature on microalgal carbohydrates and their use.

Effect of Magnetopriming on Photosynthetic Performance of Plants

Magnetopriming has emerged as a promising seed-priming method, improving seed vigor, plant performance and productivity under both normal and stressed conditions. Various recent reports have demonstrated that improved photosynthesis can lead to higher biomass accumulation and overall crop yield. The major focus of the present review is magnetopriming-based, improved growth parameters, which ultimately favor increased photosynthetic performance. The plants originating from magnetoprimed seeds showed increased plant height, leaf area, fresh weight, thick midrib and minor veins. Similarly, chlorophyll and carotenoid contents, efficiency of PSII, quantum yield of electron transport, stomatal conductance, and activities of carbonic anhydrase (CA), Rubisco and PEP-carboxylase enzymes are enhanced with magnetopriming of the seeds. In addition, a higher fluorescence yield at the J-I-P phase in polyphasic chlorophyll a fluorescence (OJIP) transient curves was observed in plants originating from magnetoprimed seeds. Here, we have presented an overview of available studies supporting the magnetopriming-based improvement of various parameters determining the photosynthetic performance of crop plants, which consequently increases crop yield. Additionally, we suggest the need for more in-depth molecular analysis in the future to shed light upon hidden regulatory mechanisms involved in magnetopriming-based, improved photosynthetic performance.

Static Magnetic Fields Effects on Polysaccharides Production by Different Microalgae Strains

Microalgae are able to produce many valuable biomolecules, such as polysaccharides, that presents a large diversity of biochemical structures and functions as antioxidant, antifungal, anticancer, among others. Static magnetic fields (SMF) influence the metabolism of microorganisms and has been shown as an alternative to increase microalgae biomass, yield and compounds production. Especially, some studies have highlighted that SMF application could enhance carbohydrate content. This study aimed to evaluate different conditions of SMF on Spirulina and Chlorella in indoor and outdoor conditions, in order to confirm the influence of SMF on polysaccharides production, evaluating which polysaccharidic fraction could be enhanced by SMF and highlighting a possible modification in EPS composition. Starch from Chlorella and exopolysaccharides (EPS) from Spirulina were quantified and characterized. SMF increased the starch content in Chorella fusca biomass. EPS productions from A. platensis and Spirulina sp. were not significantly increased, and global composition appeared similar to the controls (constituted basically of 80–86% neutral sugars and 13–19% uronic acids). However, the monosaccharide composition analysis revealed a significant modification of composition, i.e., the amount of fucose, arabinose, rhamnose, galactose and glucuronic acid was increased, while the glucose content was decreased. SMF application led to significant modification of polysaccharides production and this study demonstrate that combining the outdoor conditions with SMF, the starch content and EPS composition was positively affected.