Accuracy of cannulated pedicle screw versus conventional pedicle screw for extra-pedicular screw placement in dysplastic pedicles without cancellous channel in adolescent idiopathic scoliosis: a computerized tomography (CT) analysis

Analysis of duration of different stages of surgery in posterior spinal fusion (PSF) for adolescent idiopathic scoliosis (AIS) patients: comparison between severe versus non-severe AIS

PURPOSE

Prolonged surgical duration in severe adolescent idiopathic scoliosis (AIS) patients is associated with increased blood loss and perioperative complications. The aim of this study was to compare the duration of each stage of posterior spinal fusion (PSF) in severe AIS (Cobb angle ≥ 90°) with non-severe AIS patients. This analysis will identify the most time-consuming stage of PSF and help surgeons formulate strategies to shorten operative time.

METHODS

Retrospective study whereby 90 AIS patients (Lenke type 2, 3, 4, and 6) who underwent PSF from 2019 to 2023 were recruited. Twenty-five severe AIS patients were categorized in Gp1 and 65 non-severe AIS patients in Gp2. Propensity score matching (PSM) with one-to-one with nearest neighbor matching (match tolerance 0.05) was performed. Outcomes measured via operation duration of each stage of surgery, blood loss, number of screws, fusion levels and screw density.

RESULTS

Twenty-five patients from each group were matched. Total operative time was significantly higher in Gp1 (168.2 ± 30.8 vs. 133.3 ± 24.0 min, p < 0.001). The lengthiest stage was screw insertion which took 58.5 ± 13.4 min in Gp1 and 44.7 ± 13.7 min in Gp2 (p = 0.001). Screw insertion contributed 39.5% of the overall increased surgical duration in Gp1. Intraoperative blood loss (1022.2 ± 412.5 vs. 714.2 ± 206.7 mL, p = 0.002), number of screws (17.1 ± 1.5 vs. 15.5 ± 1.1, p < 0.001) and fusion level (13.1 ± 0.9 vs. 12.5 ± 1.0, p = 0.026) were significantly higher in Gp1.

CONCLUSION

Screw insertion was the most time-consuming stage of PSF and was significantly longer in severe AIS. Adjunct technologies such as CT-guided navigation and robotic-assisted navigation should be considered to reduce screw insertion time in severe AIS.

Accuracy of Patient-Specific 3D-Printed Drill Guides for Pedicle and Lateral Mass Screw Insertion: An Analysis of 76 Cervical and Thoracic Screw Trajectories

STUDY DESIGN

Single-center retrospective case series.

OBJECTIVE

The purpose of this study was to assess the safety and accuracy of three-dimensional (3D)-printed individualized drill guides for pedicle and lateral mass screw insertion in the cervical and upper-thoracic region, by comparing the preoperative 3D surgical plan with the postoperative results.

SUMMARY OF BACKGROUND DATA

Posterior spinal fusion surgery can provide rigid intervertebral fixation but screw misplacement involves a high risk of neurovascular injury. However, modern spine surgeons now have tools such as virtual surgical planning and 3D-printed drill guides to facilitate spinal screw insertion.

METHODS

A total of 15 patients who underwent posterior spinal fusion surgery involving patient-specific 3D-printed drill guides were included in this study. After segmentation of bone and screws, the postoperative models were superimposed onto the preoperative surgical plan. The accuracy of the realized screw trajectories was quantified by measuring the entry point and angular deviation.

RESULTS

The 3D deviation analysis showed that the entry point and angular deviation over all 76 screw trajectories were 1.40 ± 0.81 mm and 6.70 ± 3.77°, respectively. Angular deviation was significantly higher in the sagittal plane than in the axial plane (P = 0.02). All screw positions were classified as "safe" (100%), showing no neurovascular injury, facet joint violation, or violation of the pedicle wall.

CONCLUSIONS

3D virtual planning and 3D-printed patient-specific drill guides appear to be safe and accurate for pedicle and lateral mass screw insertion in the cervical and upper-thoracic spine. The quantitative 3D deviation analyses confirmed that screw positions were accurate with respect to the 3D-surgical plan.Level of Evidence: 4.

Uniplanar Cannulated Pedicle Screws in the Correction of Lenke Type 1 Adolescent Idiopathic Scoliosis

OBJECTIVE

To report the clinical use of uniplanar cannulated pedicle screws for the correction of Lenke type 1 adolescent idiopathic scoliosis (AIS), and to evalute its safety and clinical outcomes.

METHODS

A total of 68 patients with Lenke type 1 AIS were retrospective analyzed, among which 38 patients were treated with uniplanar cannulated screws at the concave side of periapical levels and multiaxial screws at the other levels (group A). The remaining 30 patients were treated with all multiaxial screws (group B). The preoperative and postoperative radiographic parameters, axial vertebral rotation, and the safety of the pedicle screws were evaluated.

RESULTS

Preoperative data were comparable between the 2 groups. The postoperative proximal thoracic curve, main thoracic curve, thoracolumbar/lumbar curve, and apical vertebral rotation were significantly improved in both groups (P < 0.05). The coronal correction rates in group A and B were 83% and 81.9% (P = 0.723). The derotation rates in group A and B were 60.8% and 43.2% (P < 0.05). The rotation classification in the group A was also better than group B. The misplacement rate in group A and B was 7.9% and 11.8% (P < 0.05), and the total misplacement rate on the concave side (11.4%) was higher than that of convex side (8.4%). On the concave side, the misplacement rate in group A and B was 9.7% and 12.3%. On the convex side, the misplacement rate in group A and B was 5.9% and 11.1% (P < 0.05).

CONCLUSIONS

Collectively, uniplanar cannulated pedicle screws could effectively increase the accuracy of pedicle screws and facilitate the derotation of the apical vertebra compared with the multiaxial pedicle screws.

Is it an asymptomatic tracheal injury or misdiagnosis in treatment of vertebral fracture: A case report

•

Pedicle screws are durable and safe tools that are frequently used in the treatment of vertebral fractures.

•

The most important complications of the use of pedicle screws are vascular injuries, internal organ injuries and spinal cord injuries.

•

Imaging methods, navigation systems, and cannulated pedicle screws should be used more frequently to reduce visceral organ injuries in the surgery of thoracic vertebral fractures.

Introduction

Pedicle screws are durable and safe instruments frequently used to treat vertebra injuries and deformities. There is also a possibility of medulla spinalis and visceral organ injury when the pedicle screws are delivered in unsuitable positions or dimensions. In this case, the authors want to draw attention to one of the visceral organ injuries during the thoracic pedicle screw placement.

Presentation of case

A 31 years old man underwent posterior instrumentation and fusion for T4 vertebra fractures. The patient was not symptomatic in the postoperative period. Tracheal pressure was observed at the 3rd thoracic vertebra level on the second day after the operation. No complications were encountered in the 3-year follow-up of the patient, who did not accept a second surgery recommended for screw replacement.

Discussion

During surgery for thoracic vertebral fractures, the shoulder joint makes it difficult to imagine as the shoulder bones enter the field of view. Therefore, the number of misplaced screws increases. Moreover, it increases the risk of internal organ injury.

Conclusion

The use of navigation systems or cannulated pedicle screws to treat thoracic vertebral fractures reduces internal organ injuries.

Comparison of the accuracy of the cannulated pedicle screw and the classical pedicle screw in the treatment of Scheuermann's kyphosis: A retrospective study

Objectives

This study aims to investigate if use of cannulated pedicle screw (CPS) in the dysplastic pedicles in Scheuermann’s kyphosis (SK) increases the accuracy rate of the screw and reduces screw-related complications.

Patients and methods

This retrospective study included 21 patients (11 males, 10 females; mean age 19.1 years; range, 13 to 22 years) (550 screws) who received correction with pedicle screws due to SK deformity between May 2015 and January 2019. Between 2017 and 2018, classical pedicle screws were used in addition to CPSs in the upper thoracic region (T2, T3, T4) and thin pedicles (group 1). However, during the years 2015 to 2016, only classical pedicle screws were used for the patients who underwent posterior instrumentation for SK (group 2). Computed tomography scanning was used to investigate the accuracy of the screws.

Results

There were 12 patients (316 screws) in group 1 and nine patients (234 screws) in group 2. Seventy-four (13.4%) of all screws were inserted incorrectly. Incorrect screw rate in group 1 was significantly lower than group 2; 21 (6.6%) and 53 (22.6%), respectively (p<0.001). There were no complications related to the use of CPSs after a mean follow-up of two-and-a-half years.

Conclusion

The use of CPS in the surgical treatment of SK does not increase the complication rate; instead it increases the accuracy of the screw. For this reason, we believe that CPS may be an effective and reliable option in the treatment of SK.

A Positive (+ve) Postoperative Upper Instrumented Vertebra Tilt Angle (≥0°) Significantly Increases the Risk of Medial Shoulder and Neck Imbalance in Lenke 1 and 2 Adolescent Idiopathic Scoliosis Patients

STUDY DESIGN

Retrospective study.

OBJECTIVE

To investigate the relationship between a +ve postoperative Upper Instrumented Vertebra (UIV) (≥0°) tilt angle and the risk of medial shoulder/neck and lateral shoulder imbalance among Lenke 1 and 2 Adolescent Idiopathic Scoliosis (AIS) patients following Posterior Spinal Fusion.

SUMMARY OF BACKGROUND DATA

Current UIV selection strategy has poor correlation with postoperative shoulder balance. The relationship between a +ve postoperative UIV tilt angle and the risk of postoperative shoulder and neck imbalance was unknown.

METHODS

One hundred thirty-six Lenke 1 and 2 AIS patients with minimum 2 years follow-up were recruited. For medial shoulder and neck balance, patients were categorized into positive (+ve) imbalance (≥+4°), balanced, or negative (-ve) imbalance (≤-4°) groups based on T1 tilt angle/Cervical Axis measurement. For lateral shoulder balance, patients were classified into +ve imbalance (≥+3°) balanced, and -ve imbalance (≤-3°) groups based on Clavicle Angle (Cla-A) measurement. Linear regression analysis identified the predictive factors for shoulder/neck imbalance. Logistic regression analysis calculated the odds ratio of shoulder/neck imbalance for patients with +ve postoperative UIV tilt angle.

RESULTS

Postoperative UIV tilt angle and preoperative T1 tilt angle were predictive of +ve medial shoulder imbalance. Postoperative UIV tilt angle and postoperative PT correction were predictive of +ve neck imbalance. Approximately 51.6% of patients with +ve medial shoulder imbalance had +ve postoperative UIV tilt angle. Patients with +ve postoperative UIV tilt angle had 14.9 times increased odds of developing +ve medial shoulder imbalance and 3.3 times increased odds of developing +ve neck imbalance. Postoperative UIV tilt angle did not predict lateral shoulder imbalance.

CONCLUSION

Patients with +ve postoperative UIV tilt angle had 14.9 times increased odds of developing +ve medial shoulder imbalance (T1 tilt angle ≥+4°) and 3.3 times increased odds of developing +ve neck imbalance (cervical axis ≥+4°).

LEVEL OF EVIDENCE

4.

Thoracic Pedicle Morphometry of Dry Vertebral Columns in Relation to Trans-Pedicular Fixation: A Cross-Sectional Study From Central India

Introduction

Trans-pedicular screw fixation is one of the main modalities of spinal instrumentation today. It is particularly challenging in the thoracic spine due to the narrow pedicle dimensions especially in the upper and mid-thoracic levels. We aimed to study the anatomical variations like pedicle dimensions and angulation in transverse and sagittal planes.

Material and methods

We conducted an anatomical investigation on 20 dry vertebral columns (14 male and six female), from T1 to T12 levels. The measurements included pedicle width, height, and transverse and sagittal angles of the pedicle. Numerical variables were summarized using mean and standard deviation.

Results

T12 vertebra was found to have the widest pedicle width (mean 7.89 ± 0.70 mm) and the widest pedicle height (mean 15.45±0.78 mm) while T5 vertebra (mean 3.65±0.40 mm) had the narrowest pedicle width. T1 vertebra had the maximum transverse angle of the pedicle (mean 30.37±2.56 degree); whereas, T2 vertebra had the maximum sagittal angle (mean 19.22±2.24 degree).

Conclusion

We have reported detailed pedicle measurements including their angulation for the thoracic spine in dry vertebral columns of central India. The pedicles are directed more medially from T1 to T10 levels and are almost neutral at T11 and T12 levels. These findings would not only be of immense help to the spinal surgeons but also help in designing implants and instrumentations specific for the thoracic spine for the central Indian population as well as aiding surgeons to perform more precise and, therefore, safe surgical procedures.

Comparison of the accuracy of cannulated pedicle screw versus conventional pedicle screw in the treatment of adolescent idiopathic scoliosis: A randomized retrospective study

BACKGROUND

Pedicle screws are commonly used to treat adolescent idiopathic scoliosis (AIS). Many studies have discussed the rates and effects of pedicle screw misplacement. In this study, to increase the accuracy rate, cannulated pedicle screws were inserted into the periapical vertebrae, highly rotated vertebrae, and vertebrae with very thin pedicles in a single patient group. We compared these results with those of a patient group who underwent conventional pedicle screw placement.

METHODS

Twenty-eight AIS patients treated surgically between 2015 and 2017 with cannulated pedicle screws or conventional pedicle screws were included. Group 1 (n = 15) received cannulated pedicle screws, whereas group 2 (n = 13) received conventional pedicle screws. Postoperative computed tomography scans were used to evaluate pedicle screw position. Pedicle perforation was assessed using the classification by Rao et al: grade 0, no perforation; grade 1, only the threads outside the pedicle (less than 2 mm); grade 2, core screw diameter outside the pedicle (2-4 mm); and grade 3, screw entirely outside the pedicle. Medial screw malposition was measured between the medial pedicle wall and the medial margin of the screw. Lateral screw malposition was measured between the lateral corpus wall and lateral screw margin.

RESULTS

Placement accuracy of 703 screws (group 1, 376; group 2, 327) was evaluated. A total of 142 (20.1%) pedicle screw perforations occurred: 63 (17.1%) in group 1 and 79 (25%) in group 2 (P < .05). There was no statistically significant intergroup difference in medial perforation (group 1, 34 [9%] vs group 2, 31 [10%]). Lateral perforation was significantly less common in group 1 (n = 29; 7.7%) than in group 2 (n = 4; 14.7%) (P = .0002).

CONCLUSIONS

The use of cannulated screws to treat AIS decreases perforation and complication rates. Although it did not significantly lower the medial perforation rate, it dramatically reduced the lateral perforation rate. The use of cannulated screws enables intraoperative confirmation of placement accuracy. Our data suggest that cannulated pedicle screw use to treat AIS is safer and more efficient.

Zonal differences in risk and pattern of pedicle screw perforations in adolescent idiopathic scoliosis (AIS): a computerized tomography (CT) review of 1986 screws

PURPOSE

To evaluate the zonal differences in risk and pattern of pedicle screw perforations in adolescent idiopathic scoliosis (AIS) patients.

METHODS

The scoliosis curves were divided into eight zones. CT scans were used to assess perforations: Grade 0, Grade 1(< 2 mm), Grade 2(2-4 mm) and Grade 3(> 4 mm). Anterior perforations were classified into Grade 0, Grade 1(< 4 mm), Grade 2(4-6 mm) and Grade 3(> 6 mm). Grade 2 and 3 (except lateral grade 2 and 3 perforation over thoracic vertebrae) were considered as 'critical perforations'.

RESULTS

1986 screws in 137 patients were analyzed. The overall perforation rate was 8.4% after exclusion of the lateral perforation. The highest medial perforation rate was at the transitional proximal thoracic (PT)/main thoracic (MT) zone (6.9%), followed by concave lumbar (6.7%) and convex main thoracic (MT) zone (6.1%). The overall critical medial perforation rate was 0.9%. 33.3% occurred at convex MT and 22.2% occurred at transitional PT/MT zone. There were 39 anterior perforations (overall perforation rate of 2.0%). 43.6% occurred at transitional PT/MT zone, whereas 23.1% occurred at concave PT zone. The overall critical anterior perforation rate was 0.6%. 5/12 (41.7%) critical perforations occurred at concave PT zone, whereas four perforations occurred at the transitional PT/MT zone. There were only two symptomatic left medial grade 2 perforations (0.1%) resulting radiculopathy, occurring at the transitional main thoracic (MT)/Lumbar (L) zone.

CONCLUSION

Overall pedicle perforation rate was 8.4%. Highest rate of critical medial perforation was at the convex MT zone and the transitional PT/MT zone, whereas highest rate of critical anterior perforation was at the concave PT zone and the transitional PT/MT zone. The rate of symptomatic perforations was 0.1%.