Applied anatomy of screw placement via the posterior arch of the atlas and anatomy-based refinements of the technique

Determination of the prevalence of complete type retrotransverse and arcuate foramen of the atlas using three-dimensional computed tomography images

PURPOSE

To determine the prevalence of complete type retrotransverse (RTF) and arcuate foramen (AF)'s in a large cohort using three-dimensional (3D) computed images (CT) and explore their correlation with each other.

METHODS

Between January 2023 and August 2024, all neck and cervical vertebrae CTs taken in our hospital were scanned retrospectively. It is noted the presence or absence of complete RTF and AF, laterality, gender, and age of those included in the study.

RESULTS

A total of 2000 patients were included in the study, with an equal distribution of females and males. The prevalence of complete AF was 6.4%, 10%, and 16.3% bilaterally, unilaterally, and in total. The prevalence of complete AF was 12% in females and 20.6% in males. The gender prevalence differences of bilateral AF were statistically significant (p < 0.001). The prevalence of complete RTF was 1.8%, 8.9%, and 10.6% bilaterally, unilaterally, and in total. The prevalence of complete RTF was 9.7% in females, and 11.6% in males. The prevalence differences between genders were insignificant (p = 0.173). The ipsilateral prevalence of complete AF and RTF was 0.2%, 0.2%, and 0.4%, respectively, bilateral, unilateral right, and unilateral left.

CONCLUSIONS

The complete AF and RTF prevalences in the study group were not uncommon. The prevalence of complete AF and RTF together is quite rare. Complete RTF is more common in elderly patients and on the left side, while complete AF does not show any difference in laterality and age, and is more common in males than in females.

Improving C1 Pedicle Screw Placement for Atlantoaxial Instability with Ultrasonic Bone Burr Assistance

OBJECTIVE

This study aims to evaluate the safety and efficacy of the ultrasonic bone burr (UBB) in facilitating C1 pedicle screw placement for atlantoaxial instability treatment, compared to the conventional high-speed drill (HSD) technique.

METHODS

A retrospective analysis was conducted on patients undergoing posterior screw-rod fixation for atlantoaxial instability between December 2017 and July 2023. The patients were divided into 2 groups based on the tools used for screw placement: UBB and HSD. Data on surgical duration, estimated blood loss, spinal cord and arterial injury incidence, screw placement accuracy, neurological status measured by the Japanese Orthopedic Association score, and fusion rates were collected and analyzed.

RESULTS

Thirteen patients received C1 pedicle screw placement via UBB facilitation, while 8 were treated using the HSD approach. The UBB group showed a significant reduction in blood loss and operation time compared to the HSD group (P = 0.002 and P < 0.001, respectively). No spinal cord or arterial injuries occurred in either group. Optimal screw placement was confirmed in all UBB cases versus 87.5% in the HSD group (P = 0.139). Both groups demonstrated significant improvements in Japanese Orthopedic Association scores with no intergroup difference. The fusion rate was 100% in the UBB group and 87.5% in the HSD group, not statistically different (P = 0.381).

CONCLUSIONS

UBB is a viable alternative for C1 pedicle screw placement, associated with reduced blood loss and shorter operation time, while achieving comparable clinical outcomes to the conventional HSD method. Nevertheless, further research with a larger sample size is needed.

Systematic review and meta-analysis of the prevalence of the retrotransverse foramen of the atlas

The retrotransverse foramen (RTF) is a nonmetric variant of the atlas vertebra that can accommodate an anastomotic vertebral vein and occipital nerve. An understanding of this variation and its occurrence is crucial, as it could aid in explanation of the unidentified cause of the high prevalence of variability in this region. The aim of this meta-analysis was to obtain data on the prevalence of the RTF and its variations according to anatomy, sex, and ethnicity. A large-scale search was conducted through the major online databases to establish and determine the pool of studies reporting data relevant to the RTF. No date or language restrictions were applied. The data collection was categorized by prevalence, type (incomplete/complete), side, sex, ethnicity, laterality, and diameter. A total of 17 studies (n = 1979 subjects) were incorporated into our analysis. The overall pooled prevalence for a complete RTF was 11.4% and the overall pooled prevalence of an incomplete (partial) RTF was 9.6%. A complete RTF was most prevalent in Africa (Sub-Saharan population) (12.1%), followed by Europe (11.8%) and Asia (9.7%). As this variant occurs in a significant number of patients in all of the aforementioned populations, recognition, and awareness, especially with thorough investigation with computer tomography angiography (CTA) should be implemented, as it is the only possible way to visualize the possible contents of RTF.

The computed tomographic evaluation of bony bridge of C1 as bleeding risk factor at the screw placement

PURPOSE

To investigate the prevalence and morphological characteristics of ponticulus posticus (PP) and ponticulus lateralis (PL) using computed tomography (CT) images on a large study sample of the Anatolian population. The presence of the PP and PL bridges can limit gap available for placement procedure through the bony elements of C1. Routine screw techniques are contraindicated because of high risk of fatal bleeding of vertebral artery (VA).

METHODS

The CT images of 1000 subjects (500 males, 500 females) were examined for the morphological characteristics and presence of PP and PL. The anteroposterior diameter, superoposterior (transverse) diameter, surface area, and central thickness of the bony bridge of the PP, PL, and transverse foramina (TF).

RESULTS

The prevalence of PP was 14.8%, and bilateral complete PP was the most common PP type at 6.8%. The prevalence of PL was 4.1% and left-side complete PL was the most common PL type at 1.2%. The prevalence of both PP and PL was more common in males and bilateral complete PP were more predominant in males (p = 0.004, p = 0.038, and p = 0.010, respectively). The surface area of PP and PL were determined to be smaller than the surface area of the ipsilateral TF (p < 0.001 and p = 0.042, respectively).

CONCLUSION

PP is not an uncommon anatomic anomaly and PL is even less frequently encountered. The prevalence of PP and PL was more common in males and bilateral complete PP was more predominant in males. Detailed information about the prevalence and morphometry of the PP and PL obtained in the present study could guide the clinicians dealing with neurosurgery, physical medicine and rehabilitation, and radiology in their practice.

Treatment of Upper Cervical Spinal Cord Injury (Unstable C1-C2) by Direct Visualization and Nailing Technique and the Advantages of Early MRI

Background

The treatment of C1-C2 fractures mainly depends on fracture type and the stability of the atlantoaxial joint. Disruption of the C1-C2 combination is a big challenge, especially in avoiding vertebral artery, nerve, and vein sinus injury during the operation.

Purpose

This study aims to show the benefit of using the posterior approach and pedicle screw insertion by nailing technique and direct visualization to treat unstable C1-C2 and, moreover, to determine the advantages of performing early MRI in patients with limited neck movement after trauma.

Method

Between Jan 2017-Feb 2019, we present 21 trauma patients who suffered from C1, C2, or unstable atlantoaxial joint. X-ray, computed tomography (CT), and magnetic resonance image (MRI) were performed preoperatively. All the patients underwent our surgical procedure (posterior approach and pedicle screw placement by direct visualization and nailing technique).

Result

The mean age was 41.1 years old, 8 females and 14 males. The average follow-up time was 2.6 years. Four patients were with C1 fracture, seven with C2 fracture, six with atlantoaxial dislocation, and four with C1 and C2 fractures. The time of MRI was between 12 hours and 48 hours; neck movement symptoms appeared between 2 days and 2 weeks.

Conclusion

The posterior approach to treat the C1 and C2 fractures or dislocation by direct visualization and nailing technique can reduce the risk of the vertebral artery, vein sinus, and nerve root injuries with significant improvement. It can show a better angle view while inserting the pedicle screws. An early MRI (12-48 hours) is essential even if no symptoms appear at the time of admission, and if it is normal, it is necessary to repeat it. The presence of skull bleeding can be associated with upper neck instability.

Biomechanical Effects of Lateral Inclination C1 and C2 Pedicle Screws on Atlantoaxial Fixation

Objective

To assess the biomechanical effect of lateral inclination C₁ and C₂ pedicle screws on the atlantoaxial fixation through vitro human cadaveric study.

Methods

From January 2016 to December 2017, fresh‐frozen cadaveric cervical spines with intact ligaments from eight donated cadavers at an average age of 71.5 ± 10.6 years, comprising of six males and two females, were collected. There were no fracture and congenital malformation in all specimens according to the imaging examination. The range of motion (ROM) of the specimens were tested in their intact condition and destabilized condition. Next, the specimens were randomly divided into two groups to ensure no differences in sex and age: Group 1 was medial inclination C₁ pedicle screw and C₂ pedicle screws (C₁MPS‐C₂PS) and Group 2 was lateral inclination C₁ pedicle screw and C₂ pedicle screws (C₁LPS‐C₂PS). The ROM of the fixation scenarios were recorded. Thereafter, all the specimens with fixation constructs were tested for 1,000 cycles of axial rotation and tensile loading to failure was carried out collinearly to the longitudinal axis of all the screws, the data were documented as screw pullout strength (SPS) in newtons. All the recorded data subjected to quantitative analysis.

Results

The ROM of specimens was increased significantly in destabilized condition and significantly reduced in fixation condition compared with intact condition. In C₁LPS‐C₂PS groups, the C₁‐C₂ cervical segment showed 3.96° ±1.21° and 3.75° ± 1.33° in flexion and extension direction, 2.85° ± 0.91° and 2.96° ± 0.71° in right and left lateral bending, 2.20° ± 0.43° and 2.15° ± 0.40° in right and left axial rotation. In C₁MPS‐C₂PS groups, it showed 4.24° ±1.31° and 3.98° ± 1.21° in flexion and extension direction, 2.76° ± 1.10° and 3.23° ± 0.62° in right and left lateral bending, 2.20° ± 0.46° and 2.21° ± 0.42° in right and left axial rotation. There was no statistically significant difference on ROM and screw pullout strengths (764.29 ± 129.00 N vs 714.55 ± 164.63 N) between the two groups. However, there was one specimen in the C₁MPS‐C₂PS group showing rupture the inferior wall of the left screw trajectory owing to the relatively thin posterior arch of the atlas, the screw pullout strength was significantly reduced (left pullout strength value: 430.5 N, right pullout strength value: 748.4 N). Therefore, in the case of the thin posterior arch of the atlas, the C₁LPS‐C₂PS group had strong long‐term biomechanics.

Conclusion

The lateral inclination C₁ pedicle screw can achieve the same biomechanical strength as the traditional atlas pedicle screw. However, for the case where the posterior arch of the atlas is relatively thin, a lateral inclination C₁ pedicle screw is more suitable.

Arterial Vascular Structures Running Through Retrotransverse Foramen and Retrotransverse Groove of the Atlas Vertebrae

OBJECTIVE

Retrotransverse foramen (RTF) and retrotransverse groove (RTG) are anatomic variations of the atlas (C1) vertebrae. RTF contains an anastomotic vein connecting atlanto-occipital and atlanto-axodian venous sinuses. The purpose of this study was to analyze the arterial vascular structures running though the RTF and RTG.

METHODS

Three-dimensional volume rendered computed tomography angiography (3D VR CTA) images of 427 patients (264 men, 163 women; age 17-87 years) were reviewed and evaluated using the RadiAnt DICOM Viewer (version 5.0.2; Medixant, Poznan, Poland). The incidence of RTF or RTG, the incidence of the V3 segment of vertebral artery variants, and the artery vascular structures inside the RTF and RTG anatomic variation of C1 were analyzed.

RESULTS

Fifty (11.7%) atlases presented RTF anatomical variant; 113 (26.5%) atlases presented RTG anatomical variants. The incidence of the V3 segment of vertebral artery variants was 0.94% (4 of 427). Three (0.7%) were persistent first intersegmental artery and 1 (0.2%) was the fenestration of the vertebral artery on left side. In 4 cases of C1 vertebral artery V3 segmental variants, there were no RTF and RTG. No artery vascular structure was found in RTF or RTG.

CONCLUSIONS

The RTF or RTG of C1 was a common anatomical variant. No arterial vascular structure runs though the RTF or RTG. The presence of C1 RTF and RTG variants had no effect on the V3 segmental course of the vertebral artery. Preoperative understanding of these variations using 3D CTA are helpful for the safe execution of the upper cervical posterior approach surgeries.

Retrotransverse Foramen and Retrotransverse Groove Anatomic Variations of the Atlas Vertebra in the Chinese Population

OBJECTIVE

To analyze the prevalence of retrotransverse foramen (RTF) or retrotransverse groove (RTG) anatomic variations in Chinese atlas vertebra (C1).

METHODS

Three-dimensional volume-rendered computed tomography angiography images of 427 subjects (264 males, 163 females; 17-87 years old) were reviewed and evaluated using dedicated software. The prevalence of RTF and RTG anatomic variation of C1 was analyzed.

RESULTS

RTF anatomic variants were present in 50 (11.7%) atlases. Bilateral RTF, unilateral left RTF, and unilateral right RTF were present in 16 (3.8%), 20 (4.9%), and 14 (3.3%) vertebrae. Comparison between males and females revealed differences in bilateral RTF (P = 0.010) and unilateral left RTF (P = 0.008). RTG anatomic variants were present in 113 (26.5%) atlases. Bilateral RTG, unilateral left RTG, and unilateral right RTG were present in 39 (9.1%), 30 (7.0%), and 44 (10.3%) vertebrae. Comparison between males and females revealed differences in RTG (P = 0.000), bilateral RTG (P = 0.006), and unilateral left RTG (P = 0.034). RTF was detected in 36 cases on the left and 30 cases on the right. RTG was detected in 69 cases on the left and 79 cases on the right. There were no side differences in the prevalence of RTF and RTG.

CONCLUSIONS

The incidence of RTG is higher than the incidence of RTF. Incidence of bilateral RTF, bilateral RTG, unilateral left RTF, unilateral left RTG, and RTG differed between males and females. Preoperative understanding of these variations using three-dimensional computed tomography angiography is helpful for safe execution of upper cervical posterior approach surgery.

Anatomical Variation and Morphometric Study on Foramen Transversarium of the Upper Cervical Vertebrae in the Thai Population

Study Design

Foramen transversarium (FT) and foramen arcuale (FA) of upper cervical vertebrae (C1 and C2) in the Thai population were investigated for variation and morphometry.

Purpose

This study aimed to reveal the morphometry of FT and FA in the Thai population.

Overview of Literature

The FT and FA are structures found in the upper spine that support the vertebral neurovascular system. Clinically, the surgical approaches to achieve upper cervical stability can be affected by spine variations. FT and FA morphometries have been documented to vary by nationality. However, such reports have been limited in the Thai population.

Methods

The FT and FA of dried C1 and C2 vertebrae (identified bones; n=107, males=53 and females=54) were observed and measured using a Digital Vernier Caliper (Mitutoyo, Kawasaki, Japan). Anteroposterior (AP) and transverse diameters of the left and right FTs (n=214) were measured and compared between sexes. Variations and types of FT and FA found on the upper vertebrae were recorded and classified.

Results

The FT shape of the Thai C1 was AP elliptical, while of that of C2 was transverse elliptical. Compared to females, both diameters of the upper spine were significantly greater in males except for the AP diameter of C2 on the right side. All diameters were significantly different in both sexes and sides except for the AP diameter of C1 and C2. A common type of FT classified in C1 was type 2 (male [69.81%], female [79.63%]) whereas for C2 it was type 1 (male [63.21%], female [59.26%]). Moreover, an incomplete osseous bridge was a major FA subtype observed in the Thai spine.

Conclusions

FT morphometry has an elliptical shape and diameters are greater in males. The FT and FA variations identified in this study will be useful for surgeons treating vertebral neurovascular injuries of the posterior upper cervical spine in the Thai population.

Krapina atlases suggest a high prevalence of anatomical variations in the first cervical vertebra of Neanderthals

The first cervical vertebra, atlas, and its anatomical variants have been widely studied in Homo sapiens. However, in Neanderthals, the presence of anatomical variants of the atlas has been very little studied until very recently. Only the Neanderthal group from the El Sidrón site (Spain) has been analysed with regard to the anatomical variants of the atlas. A high prevalence of anatomical variants has been described in this sample, which points to low genetic diversity in this Neanderthal group. Even so, the high prevalence of anatomical variations detected in El Sidrón Neanderthal atlases needs to be confirmed by analysing more Neanderthal remains. In this context, we analysed the possible presence of anatomical variants in the three Neanderthal atlases recovered from the Krapina site (Croatia) within the Neanderthal lineage. Two of the three Krapina atlases presented anatomical variations. One atlas (Krapina 98) had an unclosed transverse foramen and the other (Krapina 99) presented a non-fused anterior atlas arch. Moreover, an extended review of the bibliography also showed these anatomical variations in other Middle and Upper Pleistocene hominins, leading us to hypothesise that anatomical variations of the atlas had a higher prevalence in extinct hominins than in modern humans.

Surgicoanatomical aspect in vascular variations of the V3 segment of vertebral artery as a risk factor for C1 instrumentation

OBJECT

Awareness of vascular anomalies in V3 segment of vertebral artery (VA) is crucial to avoid iatrogenic injuries during surgical procedure. This study aimed to analyze the incidence of V3 segment vascular variations and demonstrate the importance of deciding the surgical strategy for C1 screw placement.

METHODS

Prevalence of vascular variations and morphometric measurements of the VA in the region of the craniocervical junction in 200 cases based on three-dimensional computed tomographic angiography (3D-CTA) scans were studied.

RESULTS

The VA has a variable course through C2 before it passes above its groove on the posterior arch of C1. Following the vascular variations of V3 segments of VA were persistent including first intersegmental artery (FIA), fenestration (FEN) of the VA, high-riding (HRVA and the posterior inferior cerebellar artery (PICA) branch originating from the C1/2 part of VA. HRVA was observed in 10.1% of patients, FIA in 1.8%, FEN in 1.3%, and PICA in 1.3%. One hundred and twenty-three (24.1%) patients were identified to have HRVA, 6% present on both sides.

CONCLUSION

The VA with FIA and FEN were rare in this study as many as a 10% the VA present over the starting point for C1 lateral screw. With respect to the vascular anatomy of V3 and more frequent left-sided VA dominancy, standard screw insertion should be started from the right side. Routine preoperative 3D-CTA evaluation is mandatory to prevent the VA injury when C1-C2 instrumentation is planned.

Prevalence of anatomic variations of the atlas vertebra

BACKGROUND CONTEXT

The retrotransverse foramen (RTF), arcuate foramen (AF), unclosed transverse foramen (UTF) and posterior atlas arch defects (PAAD) are anatomic variations of the atlas vertebra that surgeons must be aware of before spine surgery is performed.

PURPOSE

To analyze the prevalence of the AF, RTF, UTF, and PAAD.

STUDY DESIGN

Ex-vivo anatomical study.

PATIENT SAMPLE

Two hundred eighteen atlas vertebrae obtained from 100 Caucasian subjects and 118 sub-Saharan African subjects (48 Sotho subjects, 35 Xhosa subjects and 35 Zulu subjects).

METHODS

We studied 218 atlas vertebrae from skeletons of the Raymond A. Dart Collection in order to analyze the prevalence of AF, RTF, UTF, and PAAD in both Caucasian and sub-Saharan African subjects.

OUTCOME MEASURES

Not applicable.

RESULTS

Sixty-nine (31.2%) atlases presented anatomical variants: 64 (29.3%) presented one anatomical variant, 4 (1.8%) presented two, and 1 (0.5%) presented three. AF, RTF, UTF, Type A and Type E defects were present in 35 (16.1%), 17 (7.8%), 17 (7.8%), 5 (2.3%), and 1 (0.5%) vertebrae, respectively. The vertebrae with two anatomical variants presented a bilateral UTF and a Type A defect, a bilateral AF and a Type A defect, a right UTF and a left AF, and a right UTF and a Type E defect. The vertebra with three anatomical variants presented a bilateral RTF, a left UTF, and a left AF. No sex differences in prevalence of the RTF (p=.775), AF (p=.605), UTF (p=.408) and Type A defects (p=1.000) were found in the sub-Saharan African and Caucasian groups (RTF, p=.306; AF, p=.346; UTF, p=.121; Type A defects, p=.561). Comparison between the sub-Saharan African (all subjects) and the Caucasian group revealed no differences in the UTF (p=.105), AF (p=.144), RTF (p=.542) and Type A defects (p=.521) prevalence. Also, no differences in the prevalence of the UTF (p=.515), AF (p=.278), and RTF (p=.857) between Zulu, Xhosa and Sotho subjects were found. Neither were found sex differences in the prevalence of UTF, RTF and AF in Zulu (p=.805, p=.234, p=.129), Xhosa (p=.269, p=.181, p=.309), and Sotho subjects (p=.062, p=.590, p=.106).

CONCLUSIONS

The present study has revealed no sex differences in the prevalence of AF, UTF, RTF or PAAD in both Caucasian and sub-Saharan African subjects. This research has also indicated no differences in the prevalence of the UTF, AF and RTF between Zulu, Xhosa and Sotho subjects. In addition, this study has revealed no differences in the Type A, UTF, AF, and RTF prevalence between the sub-Saharan African (all subjects) and the Caucasian subjects. These variations may be known by surgeons before spine surgery for better planning.

How Common Is the Ponticulus Posticus?: A Computed Tomography Based Analysis of 2917 Patients

STUDY DESIGN

A computed tomography (CT) study of the morphology of the C1 vertebra.

OBJECTIVE

Is to determine the prevalence of ponticulus posticus (PP) by analyzing CT scans performed on a large, diverse population in the northeast United States. This study also proposes a CT-based classification system both to aid in unifying the description of PP, and to aid in future research.

SUMMARY OF BACKGROUND DATA

The prevalence of PP varies from 5% to 68% in published studies. There may be geographic variation in the prevalence of PP. Our objective was to establish the prevalence of PP in the general population, and to develop a comprehensive classification system to describe PP.

METHODS

We evaluated cervical spine CT scans performed on patients in the emergency room of a level I trauma center over a 1-year period (January 1, 2014-December 31, 2014). The CT images were evaluated for the presence of a PP, and if present the following demographic data were collected: age, sex, race/ethnicity, and body mass index (BMI). We propose a novel classification system to standardize the description of PP identified on CT scan.

RESULTS

Two thousand, nine hundred and seventeen cervical spine CT scans were reviewed in this study. The prevalence of PP was 22.5%. Men had a higher prevalence of PP than women (53.5% male vs. 46.5% female P ≤ 0.01). When compared with the overall population, African-Americans were more likely to have a PP (P ≤ 0.01), while Caucasian patients were less likely (P ≤ 0.01). The novel classification consisted of a two letter designation for each patient, with the first letter denoting the right sided arch and the second letter the left sided arch. Each side of the arch described as an A, B, or C type. The A type had no presence of a PP, B type had in incomplete PP, and C type had a complete PP. The most common type of a PP was CC encompassing 25% of the patients. The presence of a PP was more common in the left sided arch than the right side (B and C type Left 89.2% vs. B and C type Right 84.7%, P = 0.02).

CONCLUSION

We found a 22.5% prevalence of PP in 2917 patients undergoing a cervical spine CT. This is the largest study to evaluating the prevalence of PP.

LEVEL OF EVIDENCE

4.

The Ponticulus Posticus as Risk Factor for Screw Insertion into the First Cervical Lateral Mass

BACKGROUND

Awareness of the osseous anomaly of ponticulus posticus (PP) is crucial in avoiding vertebral artery (VA) injuries during C1 instrumentation. The aim of this study was to investigate PP and its relationship with the VA with three-dimensional computed tomography angiography.

METHODS

PP and the VA were investigated as intraoperative landmarks. The intersection of the VA to the posterior arch of C1 and the medial line and the posterior arch and VA curve around lateral masses were measured as intraoperative references.

RESULTS

PP was identified in 14.3% of samples. The anomaly was more common in women and on the right side. Of cases, 48.2% had PP bilaterally. In PP cases, the VA had variable courses through C2 before it passed under its bony bridges on the posterior arch of C1. Mean distances were found at the intersection of the VA to the posterior arch of C1 and the medial line to be larger and the posterior arch of C1 and the VA curve around lateral masses to be narrower than normal cases. Dual computed tomography scan data from C1 with PP were used to create three-dimensional patient-specific life-sized cervical spine models. Models revealed how the bone bridge affected the VA. The feasibility (>4 mm) of a safe lateral mass screw fixation was not influenced by PP anomalies.

CONCLUSIONS

The presence of the PP loop can limit space available for placement of the screw through the bony elements of C1. Standard screw techniques are contraindicated owing to the unacceptable high risk of VA injury.

Ponticulus posticus: Morphometric analysis and Its anatomical Implications for occipito-cervical fusion

OBJECTIVE

The purpose of this study was to evaluate the morphometric characteristics of ponticulus posticus (PP) and determine the impact of two promising high cervical operations (posterior arch to lateral mass screw fixation (PALMSF) and occipital condyle fixation (OCF)).

PATIENTS AND METHODS

We evaluated retrospective data from a total of 2628 head and neck 3-dimensional CT-angiographies (3D-CTA) that did not have bony or vascular abnormalities. The PP anomaly cases were confirmed, then we measured vertebral artery groove height (VAGH), arch to vertebral artery distance (AVD) and posterior arch height (PAH) for PALMSF. We also measured the vertebral artery to occipital bone distance (VOD) for OCF.

RESULTS

In 186 patients (7.1%), 227 PP (complete or near complete) were identified and this anomaly was more common in males and on the left side. The mean VAGH and PAH values ranged from 5.0 to 6.0mm and from 7.0 to 8.8mm, respectively. The VAGH value was not statistically different, regardless of the presence of PP, and the feasibility (>4mm) of a safe PALMSF (range, 87.7-100%) was not influenced by PP anomalies. The mean value of VOD in the anomaly side (range, 6.0-8.0mm) was much higher than for normal side (range, 4.2-5.7mm) and the proportion of patients that had a safe OCF (>3.5mm) was also much higher (range, 90.8-96.9%) than for the normal side.

CONCLUSIONS

A PP anomaly might have some anatomical feasibility and advantage during PALMSF and OCF, due to the relatively sufficient bony (VAGH) and spatial regions (VOD). However, there are gender differences in anatomical dimensions (VAGH, VOD and AVD); therefore, surgery in female patients should be approached more cautiously in the future.