Sensing L-cysteine in urine using a pencil graphite electrode modified with a copper hexacyanoferrate nanostructure

Rare earth upconversion luminescent composite based on energy transfer for specific and sensitive detection of cysteine

Abnormal levels of thiols in cysteine (Cys) have been shown to be associated with growth retardation, skin lesions, and neurotoxicity in humans. Herein, we designed and synthesized a rare earth upconversion luminescent (UCL) nanocomposite probe UCNP-PEG-NOF1 for the UCL detection of Cys using NOF1 developed by our group as a Cys probe. The core structure of rare earth nanoparticles can absorb light at 980 nm and convert it into visible light. The detection principle of Cys was based on the change in absorption peak before and after the reaction between NOF1 and Cys, as well as the change in UCL intensity. The rare earth nanocomposite in the probe could be excited by near-infrared light and had low background fluorescence and strong penetration ability; thus, the probe was successfully employed to specifically and sensitively detect Cys with a low background signal. Overall, the developed UCNP-PEG-NOF1 probe had good selectivity and high sensitivity for Cys; its detection limit was as low as 83 nM.

Development of L-cysteine sensor based on thallium oxide coupled multi-walled carbon nanotube nanocomposites with electrochemical approach

Here, Nanocomposites of thallium oxide doped multi-walled carbon nanotube (Tl2O.MWCNT NCs) were prepared by utilizing the wet-chemical method (WCM) in an alkaline phase at low temperature. Different optical procedures (FTIR: Fourier Transform Infra-Red Spectroscopy, XRD: Powder X-ray diffraction, FESEM: Field-Emission Scanning Electron Microscopy, XEDS: X-ray Electron Dispersive Spectroscopy, TEM: Tunneling Electron Microscopy, and XPS: X-ray photoelectron spectroscopy) were used to fully characterize (Optical, structural, crystalline, morphological, and elemental etc.) of the prepared Tl2O.MWCNT NCs. Modification of the thin-layer with NCs onto glassy carbon electrode (GCE) is prepared and applied for the enzyme-free detection of selective and sensitive L-cysteine by electrochemical approach. Using a reliable current-voltage approach, analytical sensing indexes such as sensitivity, LDR, LOD, LOQ, durability, and interference were assessed by fabricated sensor probe (GCE/Tl2O.MWCNT NCs/CPM) in selective detection of L-cysteine in a room condition, whereas nafion was used as conducting polymer matrix (CPM) during the fabrication of GCE with NCs. L-cysteine calibration plot was found to be linear over an extensive range of concentration. The calibration curve was used to calculate the sensing parameters such as sensitivity (316.46 pAμM-1cm-2), LOD down to (~18.90 ± 1.89 pM), and LOQ (63.0 pM) of the prepared sensor. The use of a simple WCM to validate the Tl2O.MWCNT NCs is a good approach for developing a NCs-based sensor for enzyme-free biomolecule identification and detection in the biomedical and health care fields in a broad scale. This proposed sensor (GCE/Tl2O.MWCNT NCs/CPM) is used to detect selective L-cysteine in real biological samples such as human, mouse, and rabbit serum and found acceptable and satisfactory results.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

Nanomaterials: Electrochemical Properties and Application in Sensors

The unique properties of nanoparticles make them an extremely valuable modifying material, being used in electrochemical sensors. The features of nanoparticles affect the kinetics and thermodynamics of electrode processes of both nanoparticles and redox reactions occurring on their surface. The paper describes theoretical background and experimental studies of these processes. During the transition from macro- to micro- and nanostructures, the analytical characteristics of sensors modify. These features of metal nanoparticles are related to their size and energy effects, which affects the analytical characteristics of developed sensors. Modification of the macroelectrode with nanoparticles and other nanomaterials reduces the detection limit and improves the degree of sensitivity and selectivity of measurements. The use of nanoparticles as transducers, catalytic constituents, parts of electrochemical sensors for antioxidant detection, adsorbents, analyte transporters, and labels in electrochemical immunosensors and signal-generating elements is described.

Fluorescent probes for detecting cysteine

Cysteine plays a crucial role in physiological processes. Therefore, it is necessary to develop a method for detecting cysteine. Fluorimetry has the advantages of convenient detection, short response time, high sensitivity and good selectivity. In this review, fluorescent probes that detect cysteine over the past three years are summarized based on structural features of fluorophores such as coumarin, BODIPY, rhodamine, fluorescein, CDs, QDs, etc and reaction groups including acrylate, aldehyde, halogen, 7-nitrobenzofurazan, etc. Then, effects of different combinations between fluorophores and response groups on probe properties and detection performances are discussed.

Pencil Graphite Electrodes: A Versatile Tool in Electroanalysis

Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.

Electrocatalytic oxidation of NADH using a pencil graphite electrode modified with quercetin

In the present study, the electrocatalytic oxidation of reduced β nicotinamide adenine dinucleotide (NADH) was investigated using a pencil graphite electrode modified with quercetin (PGE/QH(2)). The PGE/QH(2) was prepared through two steps: (i) the pre-treatment of PGE at 1.40 V vs. Ag|AgCl|KCl((sat.)) in pH 7.0 phosphate buffer containing 0.1 M KCl for 60s and (ii) adsorption of QH(2) on the PGE via immersion of PGE into a 1.0mM QH(2) solution (in ethanol) for 60s. Cyclic voltammetric studies show that the peak potential of NADH oxidation shifts from +500 mV at bare PGE to +300 mV at PGE/QH(2). The electrocatalytic currents obtained from amperometric measurements at +300 mV vs. Ag|AgCl|KCl((sat.)) and in phosphate buffer solution at pH 7.0 containing 0.1M KCl were linearly related to the concentration of NADH. Linear calibration plots are obtained in the concentration range from 0.5 μM to 100 μM. The limit of detection was found to be 0.15 μM.

Voltammetric determination of cysteine using carbon paste electrode modified with Co(II)-Y zeolite

A novel zeolite modified electrode for use in voltammetric determination of l-cysteine (CySH) was described. The electrode comprises a Co(II)-exchanged zeolite Y as modifier in carbon paste matrix. First, the electrochemical behavior of Co(II) in modified carbon paste electrode was studied. The results demonstrated that diffusion can control the redox process of cobalt cations at the surface of the modified electrode. Then, the behavior of the electrode in the presence of CySH was studied by using cyclic voltammetry and a novel behavior was observed. In high concentration of CySH (above 10 mmol L(-1)), one pair of semi-reversible electrochemical extra peak was observed which was assigned to the processes of oxidation-reduction of CySH at the unmodified and modified electrode. Acidic conditions with respect to the neutral one cause an increase in the electrode response. The modified electrode showed a suitable linear calibration graph in the concentration range of 1.0×10(-9)-1.0×10(-3)mol L(-1) cysteine with a detection limit of 2.37×10(-10)mol L(-1). The influence of potential interfering substances on the peak current was studied and the results showed that the method was highly selective for determination of CySH. Thus, the proposed electrode was used for the determination of CySH in real samples including human blood serum, urine, N-acetylcysteine tablet and powdered poultry feed and the satisfactory results were obtained. Typical features of the sensor can be summarized as: low cost, simple preparation, fast response, good stability and selectivity, wide linear range, low detection limit and high reproducibility.