Multiwalled carbon nanotubes modified with 2-aminobenzothiazole modified for uniquely selective solid-phase extraction and determination of Pb(II) ion in water samples

Dispersive Micro-Solid Phase Extraction Using a Graphene Oxide Nanosheet with Neocuproine and Batocuproine for the Preconcentration of Traces of Metal Ions in Food Samples

A dispersive micro-solid phase extraction (Dµ-SPE) method for the preconcentration of trace metal ions (Pb, Cd, Cr, Mn, Fe, Co, Ni, Cu, Zn) on graphene oxide with the complexing reagents neocuproine or batocuproine is presented here. Metal ions form cationic complexes with neocuproine and batocuproine. These compounds are adsorbed on the GO surface via electrostatic interactions. The factors affecting the separation and preconcentration of analytes such as pH, eluent (concentration, type, volume), amount of neocuproine, batocuproine and GO, mixing time, and sample volume were optimized. The optimal sorption pH was 8. The adsorbed ions were effectively eluted with 5 mL 0.5 mol L^-1 HNO₃ solution and determined by the ICP-OES technique. The preconcentration factor for the GO/neocuproine and GO/batocuproine in the range 10-100 and 40-200 was obtained for the analytes, with detection limits of 0.035-0.84 ng mL^-1 and 0.047-0.54 ng mL^-1, respectively. The method was validated by the analysis of the three certified reference materials: M-3 HerTis, M-4 CormTis, and M-5 CodTis. The procedure was applied to determine metal levels in food samples.

Rational assembly of GO-based heterocyclic sulfur- and nitrogen-containing aerogels and their adsorption properties toward rare earth elementals

An aromatic heterocyclic compound, 2-aminobenzothiazole (ABT), was used to decorate graphene oxide (GO) by a facile hydrothermal self-assembly procedure. The developed three-dimensional (3D) GO-ABT composite aerogels could be utilized as high-powered and sustainable adsorbents for the enrichment and recovery of low concentration rare earth elements (REEs) from aqueous solutions. The composition and microstructure of GO-ABT composites were explored various characterization methods. The enrichment properties of GO-ABT composites for REEs were investigated in detail, revealing the existence of S-, N- and -NH₂ in ABT, as well as the carboxyl and hydroxyl groups of GO which might act as the major REE binding sites. The adsorption of GO-ABT composites for low concentration REEs could reach equilibrium in 30 min. Our investigations confirmed that the optimal pH value of GO-ABT composites for REEs was pH 4.0-5.0. For the adsorbent regeneration study, 50.0 mg of GO-ABT_{15:1/120 °C/6 h} composite was used toward 20.0 mL of Er³⁺ solutions. After ten regeneration cycles, the adsorption rates of GO-ABT composites for Er³⁺ remained around 100%, and the desorption rates maintained over 90%. The long-term storage of the adsorbent did not affect its adsorption ability, while desorption rates increased, indicating it possessed relatively higher stability.

A Simple Organic Solvent-Free Liquid-Liquid Microextraction Method for the Determination of Potentially Toxic Metals as 2-(5-Bromo-2-pyridylazo)-5-(diethylamino)phenol Complex from Food and Biological Samples

An organic solvent-free method was developed to extract some potentially toxic metals, as complexed with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol, from different real samples prior to their determination by microsampling flame atomic absorption spectrometry. The method, named ionic liquid-based ultrasound-enhanced air-assisted liquid-liquid microextraction (IL-USE-AALLME), is based upon withdrawing and pushing out a mixture of an aqueous sample and an IL (as the extraction solvent) for several times into a conical test tube using a single syringe, placed in an ultrasound bath (as the enhancing mass transfer agent) during the extraction process. Different effective parameters were studied, and at the optimized conditions, limits of detection, linear dynamic ranges, and enrichment factors were ranged from 0.9 to 2.2 μg L(-1), 3.0 to 1023 μg L(-1), and 20 ± 2 to 22 ± 2, respectively. After optimization, the method was successfully applied to determine Pb(2+), Cu(2+), Co(2+), Ni(2+), and Cr(3+) in different biological (hair and nail), vegetable (coriander, parsley, and tarragon), fruit juice (apple, orange, and peach), and water (tap, mineral, and wastewater) samples. The proposed method was compared with two other IL-based and disperser solvent-free methods (i.e., IL-based air-assisted liquid-liquid microextraction and IL-based ultrasound-assisted emulsification microextraction) to demonstrate its performance.

Suspended aminosilanized graphene oxide nanosheets for selective preconcentration of lead ions and ultrasensitive determination by electrothermal atomic absorption spectrometry

The aminosilanized graphene oxide (GO-NH2) was prepared for selective adsorption of Pb(II) ions. Graphene oxide (GO) and GO-NH2 prepared through the amino-silanization of GO with 3-aminopropyltriethoxysilane were characterized by scanning electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. The batch experiments show that GO-NH2 is characterized by high selectivity toward Pb(II) ions. Adsorption isotherms suggest that sorption of Pb(II) on GO-NH2 nanosheets is monolayer coverage, and adsorption is controlled by a chemical process involving the surface complexation of Pb(II) ions with the nitrogen-containing groups on the surface of GO-NH2. Pb(II) ions can be quantitatively adsorbed at pH 6 with maximum adsorption capacity of 96 mg g(-1). The GO-NH2 was used for selective and sensitive determination of Pb(II) ions by electrothermal atomic absorption spectrometry (ET-AAS). The preconcentration of Pb(II) ions is based on dispersive micro solid-phase extraction in which the suspended GO-NH2 is rapidly injected into analyzed water sample. Such features of GO-NH2 nanosheets as wrinkled structure, softness, flexibility, and excellent dispersibility in water allow achieving very good contact with analyzed solution, and adsorption of Pb(II) ions is very fast. The experiment shows that after separation of the solid phase, the suspension of GO-NH2 with adsorbed Pb(II) ions can be directly injected into the graphite tube and analyzed by ET-AAS. The GO-NH2 is characterized by high selectivity toward Pb(II) ions and can be successfully used for analysis of various water samples with excellent enrichment factors of 100 and detection limits of 9.4 ng L(-1).

Modification of Multiwalled Carbon Nanotubes by Dipyridile Amine for Potentiometric Determination of Lead(II) Ions in Environmental Samples

A carbon paste electrode was modified by dipyridile amine functionalized multiwalled carbon nanotubes for determination of trace amounts of lead(II) ions. The electrode composition was graphite powder 70%, paraffin 23%, and dipyridile amine modified MWCNTs 7% (W/W). The linear range for lead(II) was 9.5 × 10−8 to 2.5 × 10−3 mol L−1, and the limit of detection was obtained 7.0 × 10−8 mol L−1. The lifetime of the electrode was ten weeks, and a fast response time was observed. The electrode was used for determination of trace amounts of Pb(II) ions in real samples and standard reference materials of water, soil, and plant.

Schiff base-chitosan grafted multiwalled carbon nanotubes as a novel solid-phase extraction adsorbent for determination of heavy metal by ICP-MS

A novel Schiff base-chitosan-grafted multiwalled carbon nanotubes (S-CS-MWCNTs) solid-phase extraction adsorbent was synthesized by covalently grafting a Schiff base-chitosan (S-CS) onto the surfaces of oxidized MWCNTs. The adsorbent was characterized by Fourier-transform infrared spectroscopy, transmission electron microscopy, and thermal gravimetric analysis. The results showed that S-CS was successfully grafted onto the surfaces of MWCNTs. A method was developed for the determination of heavy metals, namely V(V), Cr(VI), Cu(II), As(V) and Pb(II) in biological and environmental samples by inductively coupled plasma mass spectrometry coupled with preconcentration with S-CS-MWCNTs. The parameters influencing preconcentration of target ions, such as the pH of the sample solution, the flow rate of sample loading, the eluent concentration, and eluent volume, were investigated and optimized. Under the optimal conditions, the enrichment factors of V(V), Cr(VI), Cu(II), As(V), and Pb(II) reached 111, 95, 60, 52, and 128, respectively, and the detection limits were as low as 1.3-3.8 ng L(-1). The developed method was successfully applied to the determination of trace-metal ions in herring, spinach, river water, and tap water with good recoveries ranging from 91.0% to 105.0%.

Optimization of ethylenediamine-grafted multiwalled carbon nanotubes for solid-phase extraction of lead cations

INTRODUCTION

Ethylenediamine-grafted multiwalled carbon nanotubes (MWCNTs-EDA-I and MWCNTs-EDA-II) are optimized and employed to investigate the preconcentration of lead ions (Pb(II)) in trace level.

RESULTS

The results show that Pb(II) can be adsorbed quantitatively on the optimized MWCNTs in the range of pH 4-7 and MWCNTs-EDA-I has a higher maximum Pb(II) adsorption capacity (157.19 mg/g) than MWCNTs-EDA-II (89.16 mg/g). The adsorbed Pb(II) can be eluted completely using 5 mL of 1 mol/L HNO(3).

DISCUSSION

A new approach using a microcolumn packed with the obtained MWCNTs-EDA-I has been developed for the preconcentration of trace amount of Pb(II). Parameters influencing the preconcentration of Pb(II), such as pH of the sample, sample volume, elution solution, and interfering ions, have been examined and optimized in detail. Under optimum experimental conditions, the limit of detection is 0.30 ng/mL with the enrichment factor of 60. The relative standard deviation (R.S.D) was 2.6% at the 20 ng/mL Pb(II) level.

CONCLUSION

The method has been applied for the preconcentration of trace amount of Pb(II) in environmental water samples with satisfying results.