Ultrasensitive visual and colorimetric determination of dopamine based on the prevention of etching of silver nanoprisms by chloride

Plasmonic nanoparticle etching-based optical sensors: current status and future prospects

Plasmonic nanoparticles are an emerging tool for developing label-free multicolorimetric sensors for biosensing and chemosensing applications. The color absorbed by nanoparticles from visible light is influenced by their size, shape, orientation, and interparticle distance. Differently sized and shaped gold and silver nanoparticles exhibit a wide range of colors, aiding in the development of label-free sensors. Etching is the process of oxidizing nanoparticles, which alters their aspect ratio, shape, plasmonic peak, and outward appearance. It is typically used to create sensitive sensing platforms. Through etching, analytes could be detected in a simple, sensitive, and selective manner. The multicolor readout of nanoparticle etching-based multicolorimetric sensors can overcome the limitations of conventional colorimetric assays and improve the accuracy of visual inspection. This review discusses different approaches for target sensing using nanoparticle etching strategies like direct etching, enzyme-mediated etching, chemical reaction-driven etching, and anti-etching-based sensors and their mechanisms. In the future, etching strategies could be modified into portable sensing devices to detect a variety of analytes, which will aid in the development of on-time, in situ, and point-of-care sensing systems.

Synthesis of Ag nanoparticles for selective dual detection of glutathione and dopamine using N, N-dimethyl-p-phenylenediamine mediated colorimetric probe

We report a simple and easy method to synthesize Ag nanoparticles (Ag NPs) and demonstrate its potential for the detection of glutathione (GSH) and dopamine (DA) via colorimetric assay. The Ag NPs were found to be monodispersed and spherical with a size of 5 ± 2 nm. The X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM) investigations revealed the formation of crystalline Ag NPs. The colour of N, N-dimethyl-p-phenylenediamine assay changed from dark pink to colourless when the concentration of GSH was increased from 1 to 40 μM. Notably, the suspension colour changed from dark pink to blue when a similar set of experiments were performed with DA. The UV/Visible and interference experiments of Ag NPs exhibited excellent sensitivity and selectivity against both GSH and DA even after the addition of 40 μM of different interference biomolecules. The calculated limit of detection (LOD) was 141 and 245 nM for GSH and DA, respectively. The real-time analysis with serum samples showed satisfactory recovery percentages of >95 and 80-90% for GSH and DA, respectively. Hence, the Ag NPs reported here have huge potential to serve as a sensitive and selective colorimetric sensor for the detection of GSH and DA for diverse applications ranging from catalysis to cancer therapy and theranostics.

Rapid and sensitive determination of ascorbic acid based on label-free silver triangular nanoplates

In this study, a new method for the detection of ascorbic acid (AA) was proposed. It was based on the protective effect of AA on silver triangular nanoplates (Ag TNPs) against Cl- induced etching reactions. Cl- can attack the corners of Ag TNPs and etch them, causing a morphological shift from triangular nanoplates to nanodiscs. As a result, the solution changes color from blue to yellow. However, in the presence of AA, the corners of Ag TNPs can be protected from Cl- etching, and the blue color of the solution remains unchanged. Using this effect, a selective sensor was designed to detect AA in the range of 0-40.00 μM with a detection limit of 2.17 μM. As the concentration of AA varies in this range, color changes from yellow to blue can be easily observed, so the designed sensor can be used for colorimetric detection. This method can be used to analyze fruit juice samples.

A novel photonic chemosensor for rapidly detecting synthetic dyes in orange juice using colorimetric and spectrophotometric methods

Synthetic dyes must be monitored and regulated. We aimed to develop a novel photonic chemosensor for rapidly monitoring synthetic dyes based on colorimetric (chemical interactions with optical probes using microfluidic paper-based analytical devices) and UV-Vis spectrophotometric methods. Various types of gold and silver nanoparticles were surveyed to identify the targets. In the presence of silver nanoprisms, the naked eye could visualize the unique and distinctive color changes of Tartrazine (Tar) to green and Sunset Yellow (Sun) to brown; UV-Vis spectrophotometry validated the results. The developed chemosensor showed linear ranges of 0.07-0.3 mM and 0.05-0.2 mM for Tar and Sun, respectively. Sources of interference had minimal effects, confirming the appropriate selectivity of the developed chemosensor. Our novel chemosensor demonstrated excellent analytical performance for measuring Tar and Sun in several types of orange juice as real samples, confirming its incredible potential for use in the food industry.

Fluorescence Detection of Trace Disinfection Byproducts by Ag Nanoprism-Modulated Lanthanide MOFs

Disinfection byproducts (DBPs), as an emerging water pollutant, present increasing concern and risk in public health and water safety. Due to their low concentration levels and inherent similarity in molecular structures, sensitive and accurate determination of DBPs is still a challenge especially for onsite or online detection. Herein, a self-regulated fluorescent probe based on the Ag nanoprism-modified lanthanide metal-organic framework (AgNPR@EuMOF) is designed for trichloroacetic acid (TCAA) detection. The EuMOF is constructed with Eu as the metal node and 5-boronoisophthalic acid as the ligand. By introducing sulfhydryl groups into EuMOF, AgNPR can be anchored on the EuMOF surface through Ag-S bonds, enabling the synthesis of stable AgNPR@EuMOF composites. During the sensing process, the triangle AgNPR will react with the organic halogen molecule, accomplished with the blue shift of surface plasmon resonance absorption peak and the significant change in the fluorescence of EuMOF. This probe can detect TCAA in a wide concentration range (0.1-40 μM) with high sensitivity and specificity. The density functional theory calculation on binding energies between DBPs and AgNPR suggests that TCAA has the largest interaction ability with AgNPR than other DBPs. Moreover, the detection of TCAA in real tap water and swimming pool water is also demonstrated with high accuracy. The reported AgNPR@EuMOF represents one of the pioneer fluorescence probes in DBP detection, which holds great promise for onsite or online analysis of trace DBPs in water.

A portable colorimetric chemosensing regime for ractopamine in chicken samples using μPCD decorated by silver nanoprisms

In recent years the use of ractopamine (RAC), originally synthesized for the treatment of respiratory diseases, is on the rise as a dietary supplement in animals. The excessive use of RAC has some adverse effects on human health. Hence, the demand for simple, easy-to-use, and expendable devices for RAC recognition, even in remote areas, is felt more than ever before. This need prompted us to devise a straightforward colorimetric system for RAC recognition based on the etching effect of RAC on AgNPrs. This nanoprobe is a very advanced materials with great optical properties and stability, which could be used unprecedentedly without any combination or reagents for RAC recognition. Considering the needs and advantages, a simple colorimetric chemosensor for the quantification of RAC was designed and applied to a chicken sample. The designed chemosensor was integrated with an optimized microfluidic paper-based colorimetric device (μPCD), creating a suitable tool for the determination of RAC based on a time/color pattern. The analytical metrics for this simple colorimetric chemosensing regime comprise a best colorimetric LLOQ of 100 μM in solution with 10 μM of μPCD, a spectroscopic LLOQ of 10 nM, and a broad linearity range of 0.1-10 000 μM, which are outstanding compared with other colorimetric techniques. The main remarkable features of this study include the first utilization of AgNPrs with high stability and excellent optical properties without any reagent as an optical sensing probe and optimized μPCD toward RAC recognition and the innovative time/color semi-analytical recognition method. Moreover, the prepared portable μPCD modified with AgNPrs could be a prized candidate for commercialization due to the benefits of the low-cost materials used, like paper and paraffin, and the simple instructions for μPCD preparation. This report could be a pioneering work, inspiring simple and effective on-site semi-analytical recognition devices for harmful substances or illegal drugs, which simply consist of a piece of lightweight paper and one drop of the required reagent.

Synthesis of Metal–Organic Frameworks Quantum Dots Composites as Sensors for Endocrine-Disrupting Chemicals

Hazardous chemical compounds such as endocrine-disrupting chemicals (EDCs) are widespread and part of the materials we use daily. Among these compounds, bisphenol A (BPA) is the most common endocrine-disrupting chemical and is prevalent due to the chemical raw materials used to manufacture thermoplastic polymers, rigid foams, and industrial coatings. General exposure to endocrine-disrupting chemicals constitutes a serious health hazard, especially to reproductive systems, and can lead to transgenerational diseases in adults due to exposure to these chemicals over several years. Thus, it is necessary to develop sensors for early detection of endocrine-disrupting chemicals. In recent years, the use of metal–organic frameworks (MOFs) as sensors for EDCs has been explored due to their distinctive characteristics, such as wide surface area, outstanding chemical fastness, structural tuneability, gas storage, molecular separation, proton conductivity, and catalyst activity, among others which can be modified to sense hazardous environmental pollutants such as EDCs. In order to improve the versatility of MOFs as sensors, semiconductor quantum dots have been introduced into the MOF pores to form metal–organic frameworks/quantum dots composites. These composites possess a large optical absorption coefficient, low toxicity, direct bandgap, formidable sensing capacity, high resistance to change under light and tunable visual qualities by varying the size and compositions, which make them useful for applications as sensors for probing of dangerous and risky environmental contaminants such as EDCs and more. In this review, we explore various synthetic strategies of (MOFs), quantum dots (QDs), and metal–organic framework quantum dots composites (MOFs@QDs) as efficient compounds for the sensing of ecological pollutants, contaminants, and toxicants such as EDCs. We also summarize various compounds or materials used in the detection of BPA as well as the sensing ability and capability of MOFs, QDs, and MOFs@QDs composites that can be used as sensors for EDCs and BPA.

Nanoparticle-based colorimetric sensors to detect neurodegenerative disease biomarkers

Neurodegenerative disorders (NDDs) are progressive, incurable health conditions that primarily affect brain cells, and result in loss of brain mass and impaired function. Current sensing technologies for NDD detection are limited by high cost, long sample preparation, and/or require skilled personnel. To overcome these limitations, optical sensors, specifically colorimetric sensors, have garnered increasing attention towards the development of a cost-effective, simple, and rapid alternative approach. In this review, we evaluate colorimetric sensing strategies of NDD biomarkers (e.g. proteins, neurotransmitters, bio-thiols, and sulfide), address the limitations and challenges of optical sensor technologies, and provide our outlook on the future of this field.

Gold and Silver Nanoparticle-Based Colorimetric Sensors: New Trends and Applications

Gold and Silver nanoparticles (AuNPs and AgNPs) are perfect platforms for developing sensing colorimetric devices thanks to their high surface to volume ratio and distinctive optical properties, particularly sensitive to changes in the surrounding environment. These characteristics ensure high sensitivity in colorimetric devices. Au and Ag nanoparticles can be capped with suitable molecules that can act as specific analyte receptors, so highly selective sensors can be obtained. This review aims to highlight the principal strategies developed during the last decade concerning the preparation of Au and Ag nanoparticle-based colorimetric sensors, with particular attention to environmental and health monitoring applications.

Label-free silver triangular nanoplates for spectrophotometric determination of catecholamines and their metabolites

A novel method towards spectrophotometric determination of catecholamines and their metabolites differing in their functional groups has been developed. This method is based on a change in morphology of silver triangular nanoplates upon the action of cateсholamines and their metabolites, which is manifested by the decrease of the nanoparticle local surface plasmon resonance (LSPR) band intensity or its shift to the short-wavelength region of the spectrum. The shift value of the LSPR band or the change of its intensity increases with increasing concentration of catecholamines or their metabolites, which is proposed for their spectrophotometric determination. The limits of detection of catecholamines and their metabolites under selected conditions increase in the series homovanillic acid < vanillylmandelic acid < L-epinephrine < L-norepinephrine < dopamine and are 0.25, 1.2, 3.0, 64, and 130 μmol L^-1, respectively. The selectivity of the proposed method was assessed using vanillylmandelic acid as example. It was found that the determination of vanillylmandelic acid does is not interfered in the presence of 4000-fold excess of Na⁺, K⁺, CH₃COO^-, and 1000-fold excess of Mg²⁺, Ca²⁺, Al³⁺, NO₃^-. The method also allows for the selective determination of vanillylmandelic acid in the presence of a 1000-fold excess of structurally related substances that do not contain either a catechol fragment or an electron donor substituent. The proposed approach was successfully applied to the determination of catecholamines in pharmaceuticals and artificial urine. Graphical abstract.

The Principle of Nanomaterials Based Surface Plasmon Resonance Biosensors and Its Potential for Dopamine Detection

For a healthy life, the human biological system should work in order. Scheduled lifestyle and lack of nutrients usually lead to fluctuations in the biological entities levels such as neurotransmitters (NTs), proteins, and hormones, which in turns put the human health in risk. Dopamine (DA) is an extremely important catecholamine NT distributed in the central nervous system. Its level in the body controls the function of human metabolism, central nervous, renal, hormonal, and cardiovascular systems. It is closely related to the major domains of human cognition, feeling, and human desires, as well as learning. Several neurological disorders such as schizophrenia and Parkinson’s disease are related to the extreme abnormalities in DA levels. Therefore, the development of an accurate, effective, and highly sensitive method for rapid determination of DA concentrations is desired. Up to now, different methods have been reported for DA detection such as electrochemical strategies, high-performance liquid chromatography, colorimetry, and capillary electrophoresis mass spectrometry. However, most of them have some limitations. Surface plasmon resonance (SPR) spectroscopy was widely used in biosensing. However, its use to detect NTs is still growing and has fascinated impressive attention of the scientific community. The focus in this concise review paper will be on the principle of SPR sensors and its operation mechanism, the factors that affect the sensor performance. The efficiency of SPR biosensors to detect several clinically related analytes will be mentioned. DA functions in the human body will be explained. Additionally, this review will cover the incorporation of nanomaterials into SPR biosensors and its potential for DA sensing with mention to its advantages and disadvantages.

Understanding cellular interactions with nanomaterials: towards a rational design of medical nanodevices

Biomedical applications increasingly require fully characterized new nanomaterials. There is strong evidence showing that nanomaterials not only interact with cells passively but also actively, mediating essential molecular processes for the regulation of cellular functions, but we are only starting to understand the mechanisms of those interactions. Systematic studies about cell behavior as a response to specific nanoparticle properties are scarce in the literature even when they are necessary for the rational design of medical nanodevices. Information in the literature shows that the physicochemical properties determine the bioactivity, biocompatibility, and safety of nanomaterials. The information available regarding the interaction and responses of cells to nanomaterials has not been analyzed and discussed in a single document. Hence, in this review, we present the latest advances about cellular responses to nanomaterials and integrate the available information into concrete considerations for the development of innovative, efficient, specific and, more importantly, safe biomedical nanodevices. We focus on how physicochemical nanoparticle properties (size, chemical surface, shape, charge, and topography) influence cell behavior in a first attempt to provide a practical guide for designing medical nanodevices, avoiding common experimental omissions that may lead to data misinterpretation. Finally, we emphasize the importance of the systematic study of nano-bio interactions to acquire sufficient reproducible information that allows accurate control of cell behavior based on tuning of nanomaterial properties. This information is useful to guide the design of specific nanodevices and nanomaterials to elicit desired cell responses, like targeting, drug delivery, cell attachment, differentiation, etc, or to avoid undesired side effects.

Fluorescence Sensing Platforms for Epinephrine Detection Based on Low Temperature Cofired Ceramics

A novel fluorescence-sensing pathway for epinephrine (EP) detection was investigated. The ceramic-based miniature biosensor was developed through the immobilization of an enzyme (laccase, tyrosinase) on a polymer—poly-(2,6-di([2,2′-bithiophen]-5-yl)-4-(5-hexylthiophen-2-yl)pyridine), based on low temperature cofired ceramics technology (LTCC). The detection procedure was based on the oxidation of the substrate, i.e., in the presence of the enzyme. An alternative enzyme-free system utilized the formation of a colorful complex between Fe²⁺ ions and epinephrine molecules. With the optimized conditions, the analytical performance illustrated high sensitivity and selectivity in a broad linear range with a detection limit of 0.14–2.10 nM. Moreover, the strategy was successfully used for an EP injection test with labeled pharmacological samples.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Colorimetric chiral recognition of D/L-phenylalanine based on triangular silver nanoplates

A new colorimetric analysis approach for chiral recognition of D- and L-forms of phenylalanine (phe) was developed based on triangular silver nanoplates (TAg-NPs). The TAg-NPs could be used as chiral colorimetric probes for D- and L-forms of phe. Upon addition of D-phe to TAg-NPs solution, a color change from blue to purple to pink could be observed, while no obvious color change was found on addition of L-phe. L-phe could prevent the TAg-NPs from being etched to small size particles while the protective effect of D-phe was weak. Moreover, the enantiomeric excess of D-phe could be determined using the proposed chiral assay in the percentage of L-phe from 0 to 100% with a correlation coefficient of 0.9855. The phenomenon could be monitored by bare eyes and quantified analysis by UV-Vis spectrophotometry. The developed approach had several advantages, such as simplicity, visualization, short analysis time and low cost. This study presented a fast visualization analysis method of chiral D/L-phenylalanine and may lay the foundation for the development of visualization chiral recognition of other target analytes.

Colorimetric detection of Hg(II) by measurement the color alterations from the "before" and "after" RGB images of etched triangular silver nanoplates

It is shown that triangular silver nanoplates (TAgNPs) are viable colorimetric probes for the fast, sensitive and selective detection of Hg(II). Detection is accomplished by reducing Hg(II) ions to elemental Hg so that an Ag/Hg amalgam is formed on the surface of the TAgNPs. This leads to the inhibition of the etching TAgNPs by chloride ions. Correspondingly, a distinct color transition can be observed that goes from yellow to brown, purple, and blue. The color alterations extracted from the red, green, and blue part of digital (RGB) images can be applied to the determination of Hg(II). The relationship between the Euclidean distances (EDs), i.e. the square roots of the sums of the squares of the ΔRGB values, vary in the 5 nM to 100 nM Hg(II) concentration range, and the limit of detection is as low as 0.35 nM. The color changes also allow for a visual estimation of the concentrations of Hg(II). The method is simple in that it only requires a digital camera for data acquisition and a Photoshop software for extracting RGB variations and data processing. Graphical abstract Hg²⁺ detection was achieved by anti-etching of TAgNPs caused by the formation of silver amalgam, along with vivid multicolor variations from yellow to brown, purple, and eventually to be blue.

Metal-Organic Framework-Based Sensors for Environmental Contaminant Sensing

Increasing demand for timely and accurate environmental pollution monitoring and control requires new sensing techniques with outstanding performance, i.e., high sensitivity, high selectivity, and reliability. Metal-organic frameworks (MOFs), also known as porous coordination polymers, are a fascinating class of highly ordered crystalline coordination polymers formed by the coordination of metal ions/clusters and organic bridging linkers/ligands. Owing to their unique structures and properties, i.e., high surface area, tailorable pore size, high density of active sites, and high catalytic activity, various MOF-based sensing platforms have been reported for environmental contaminant detection including anions, heavy metal ions, organic compounds, and gases. In this review, recent progress in MOF-based environmental sensors is introduced with a focus on optical, electrochemical, and field-effect transistor sensors. The sensors have shown unique and promising performance in water and gas contaminant sensing. Moreover, by incorporation with other functional materials, MOF-based composites can greatly improve the sensor performance. The current limitations and future directions of MOF-based sensors are also discussed.