Colorimetric glutathione assay based on the peroxidase-like activity of a nanocomposite consisting of platinum nanoparticles and graphene oxide

Scandium Oxide Mimic Enzymes toward Highly Sensitive Colorimetric Detection of Glutathione

Glutathione (GSH) is an important biochemical substance in the body, and efficient detection plays an important role in evaluating human health. This work develops a simple and efficient method for GSH detection by biomimetic enzyme-catalyzed colorimetric sensing. A novel scandium oxide crystal is prepared by a one-step pyrolysis method. The crystal structure, microstructure, and surface potential of scandium oxide crystals are analyzed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and potentiometry. Furthermore, the scandium oxide crystal can catalyze the oxidation of the colorimetric substrate TMB in the presence of H2O2, exhibiting characteristics of peroxidase-like activity. Its catalytic effect is influenced by the concentration, temperature, pH, and reaction time, showing a certain degree of dependency. The Michaelis constants of scandium oxide crystal are 0.073 and 0.301 mM for H2O2 and TMB, respectively. Finally, an enzymatic colorimetric sensing method based on the scandium oxide crystal is established for the detection of GSH levels in human serum. The corresponding detection limit and linear range are 0.21 and 0.5-50 μM, respectively. This work provides new insights for developing detection materials and sensing methods toward GSH analysis.

O-Phthalaldehyde Derivatization for the Paper-Based Fluorometric Determination of Glutathione in Nutritional Supplements

Herein, a new, direct paper-based fluorimetric method is described for the quantitative determination of glutathione (GSH) molecules in nutritional supplements. Briefly, the proposed analytical method is based on the fluorescence emission resulting from the direct and selective chemical reaction of GSH molecules with the derivatization reagent that is o-phthalaldehyde (OPA) in acidic conditions at room temperature. The intensity of the emitted fluorescence on the surface of the analytical paper devices after irradiation with a lamp at 365 nm is proportional to the concentration of GSH and is measured using a smartphone as the detector. This methodology, which is suitable for measurements in laboratories with limited resources, does not require specialized instrumentation or trained personnel. The protocol governing the proposed method is simple and easily applicable. Essentially, the chemical analyst should adjust the value of pH on the surface of the paper by adding a minimal amount of buffer solution; then, after adding a few microliters of the derivatization reagent, wait for the surface of the paper to dry and, finally, add the analyte. Subsequently, the irradiation of the sensor and the measurement of the emitted fluorescence can be recorded with a mobile phone. In the present study, several parameters affecting the chemical reaction and the emitted fluorescence were optimized, the effect of interfering compounds that may be present in dietary supplements was examined, and the stability of these paper sensors under different storage conditions was evaluated. Additionally, the chemical stability of these paper devices in various maintenance conditions was studied, with satisfactory results. The detection limit calculated as 3.3 S/N was 20.5 μmol L-1, while the precision of the method was satisfactory, ranging from 3.1% (intra-day) to 7.3% (inter-day). Finally, the method was successfully applied to three different samples of dietary supplements.

The development of a novel copper-loaded mesoporous silica nanoparticle as a peroxidase mimetic for colorimetric biosensing and its application in H2O2 and GSH assay

In recent years, the development of nanomaterials-based peroxidase mimics as enzyme sensors has been attracting considerable interest due to their outstanding features, including potent stability, and cost-effectiveness toward natural enzymes. In this work, mesoporous silica nanoparticles functionalized by copper (Cu-MSN) were prepared as a new artificial enzyme for the first time through the sol-gel procedure. A comprehensive investigation of the catalytic activity of Cu-MSN was done through the oxidation of chromogenic peroxidase substrates, 3,3',5,5'-tetramethylbenzidine (TMB), and (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), in the presence of H₂O₂. The results indicate that the peroxidase-like activity of the as-prepared sample is significantly higher than other nanoparticles. Additionally, for the study, a facile and rapid sensing method based on the enzyme-like activity of Cu-MSN to detect H₂O₂ and glutathione (GSH) was developed to examine the potency of the proposed biosensor. Preliminary analysis revealed that the limit of detection (LOD) of H₂O₂ and GSH is 0.2 and 0.0126 μM, in the range of 0.9-100 and 0.042-1 μM, respectively. These findings support the claims for the efficiency of the sensor in detection fields. Also, human serum was utilized as the real sample to obtain additional evidence.

Smartphone-Based Janus Micromotors Strategy for Motion-Based Detection of Glutathione

Herein, we describe a Janus micromotor smartphone platform for the motion-based detection of glutathione. The system compromises a universal three-dimensional (3D)-printed platform to hold a commercial smartphone, which is equipped with an external magnification optical lens (20-400×) directly attached to the camera, an adjustable sample holder to accommodate a glass slide, and a light-emitting diode (LED) source. The presence of glutathione in peroxide-rich sample media results in the decrease in the speed of 20 μm graphene-wrapped/PtNPs Janus micromotors due to poisoning of the catalytic layer by a thiol bond formation. The speed can be correlated with the concentration of glutathione, achieving a limit of detection of 0.90 μM, with percent recoveries and excellent selectivity under the presence of interfering amino acids and proteins. Naked-eye visualization of the speed decrease allows for the design of a test strip for fast glutathione detection (30 s), avoiding previous amplification strategies or sample preparation steps. The concept can be extended to other micromotor approaches relying on fluorescence or colorimetric detection for future multiplexed schemes.

Micro-Bio-Chemo-Mechanical-Systems: Micromotors, Microfluidics, and Nanozymes for Biomedical Applications

Wireless nano-/micromotors powered by chemical reactions and/or external fields generate motive forces, perform tasks, and significantly extend short-range dynamic responses of passive biomedical microcarriers. However, before micromotors can be translated into clinical use, several major problems, including the biocompatibility of materials, the toxicity of chemical fuels, and deep tissue imaging methods, must be solved. Nanomaterials with enzyme-like characteristics (e.g., catalase, oxidase, peroxidase, superoxide dismutase), that is, nanozymes, can significantly expand the scope of micromotors' chemical fuels. A convergence of nanozymes, micromotors, and microfluidics can lead to a paradigm shift in the fabrication of multifunctional micromotors in reasonable quantities, encapsulation of desired subsystems, and engineering of FDA-approved core-shell structures with tuneable biological, physical, chemical, and mechanical properties. Microfluidic methods are used to prepare stable bubbles/microbubbles and capsules integrating ultrasound, optoacoustic, fluorescent, and magnetic resonance imaging modalities. The aim here is to discuss an interdisciplinary approach of three independent emerging topics: micromotors, nanozymes, and microfluidics to creatively: 1) embrace new ideas, 2) think across boundaries, and 3) solve problems whose solutions are beyond the scope of a single discipline toward the development of micro-bio-chemo-mechanical-systems for diverse bioapplications.

Turn-on fluorescent glutathione detection based on lucigenin and MnO2 nanosheets

In this work, a glutathione (GSH) sensing nano-platform using lucigenin as a fluorescent probe in the presence of MnO2 nanosheets was reported for the first time. Unlike the earlier fluorescent detection systems based on MnO2 nanosheets, which depend on Förster resonance energy transfer (FRET) or the dynamic quenching effect (DQE), the mechanism of the quenching process of MnO2 nanosheets on lucigenin fluorescence was attributed mainly to a static quenching effect (SQE) with a minor contribution of the inner filter effect (IFE). A double exponential fluorescence decay of lucigenin was obtained in various MnO2 nanosheet concentrations as a result of their SQE and IFE. Based on this phenomenon and taking advantage of the redox reaction between GSH and MnO2 nanosheets, we have developed a switch-on sensitive fluorescent method for GSH via the recovery of the MnO2 nanosheet-quenched fluorescence of lucigenin. A good linearity range of 1.0-150.0 μM with a low limit of detection (S/N = 3) of 180.0 nM was achieved, revealing the higher sensitivity for GSH determination in comparison with the previously reported MnO2 nanosheet-based turn-on fluorescent methods. The developed fluorescent nano-platform exhibits excellent selectivity with successful application for GSH detection in human serum plasma, indicating its good practicability for GSH sensing in biological and clinical applications.

Multienzymes activity of metals and metal oxide nanomaterials: applications from biotechnology to medicine and environmental engineering

With the rapid advancement and progress of nanotechnology, nanomaterials with enzyme-like catalytic activity have fascinated the remarkable attention of researchers, due to their low cost, high operational stability, adjustable catalytic activity, and ease of recycling and reuse. Nanozymes can catalyze the same reactions as performed by enzymes in nature. In contrast the intrinsic shortcomings of natural enzymes such as high manufacturing cost, low operational stability, production complexity, harsh catalytic conditions and difficulties of recycling, did not limit their wide applications. The broad interest in enzymatic nanomaterial relies on their outstanding properties such as stability, high activity, and rigidity to harsh environments, long-term storage and easy preparation, which make them a convenient substitute instead of the native enzyme. These abilities make the nanozymes suitable for multiple applications in sensing and imaging, tissue engineering, environmental protection, satisfactory tumor diagnostic and therapeutic, because of distinguished properties compared with other artificial enzymes such as high biocompatibility, low toxicity, size dependent catalytic activities, large surface area for further bioconjugation or modification and also smart response to external stimuli. This review summarizes and highlights latest progress in applications of metal and metal oxide nanomaterials with enzyme/multienzyme mimicking activities. We cover the applications of sensing, cancer therapy, water treatment and anti-bacterial efficacy. We also put forward the current challenges and prospects in this research area, hoping to extension of this emerging field. In addition to therapeutic potential of nanozymes for disease prevention, their practical effects in diagnostics, to monitor the presence of SARS-CoV-2 and related biomarkers for future pandemics will be predicted.

Glutathione detection in human serum using gold nanoparticle decorated, monodisperse porous silica microspheres in the magnetic form

A nanozyme for glutathione (GSH) detection in a broad concentration range was synthesized. GSH is usually detected up to an upper limit of 100 μM using current noble metal nanozymes due to the sharp decrease in the colorimetric response with the increasing GSH concentration. Strong inhibition of colorimetric reactions by GSH adsorbed onto noble metal based nanozymes in the form of non-porous, nanoscale particulate materials dispersed in an aqueous medium is the reason for the sharp decrease in the colorimetric response. In the present study, a new magnetic nanozyme synthesized by immobilization of Au nanoparticles (Au NPs) on magnetic, monodisperse porous silica microspheres (>5 μm) obtained by a "staged-shape templating sol-gel protocol" exhibited peroxidase-like activity up to a GSH concentration of 5000 μM. A more controlled linear decrease in the peroxidase-like activity with a lower slope with respect to that of similar nanozymes was observed with the increasing GSH concentration. The proposed design allowed the GSH detection in a broader concentration range depending on the adsorption of GSH onto the Au NPs immobilized on magnetic, monodisperse porous silica microspheres. A calibration plot allowing the detection of GSH in a broad concentration range up to 3300 μM was obtained using the magnetic nanozyme. The GSH concentration was also determined in human serum by elevating the upper detection range and adjusting the sensitivity of detection via controlling the nanozyme concentration.

N,N-dicarboxymethyl Perylene-diimide modified CeCoO3: Enhanced peroxidase activity, synergetic catalytic mechanism and glutathione colorimetric sensing

N,N-dicarboxymethyl Perylene-diimide (PDI) modified CeCoO₃ nanocomposites were prepared by a two-step method. After modification with PDI molecules, the obtained PDI-CeCoO₃ nanocomposites were demonstrated to possess the heightened peroxidase-like activity, compared with that of pure CeCoO₃ nanoparticles. In the presence of H₂O₂, the heightened peroxidase-like behaviors of PDI-CeCoO₃ were evaluated by the oxidation of the colorless substrate 3,3,5,5-tetramethylbenzidine (TMB) into blue oxTMB, which was detected visually only in 4 min. Importantly, a systematic study of catalytic activity of PDI-CeCoO₃ by different means, including fluorescent probe, electrochemical data, diffuse reflection spectra together with free radical scavenger is executed, verifying that the catalytic activity were from O₂^- and electron holes (h⁺). And, the transfer of photogenerated carriers in the PDI-CeCoO₃ was the Z-scheme heterojuntion mechanism. Furthermore, the peroxidase-like activity of PDI-CeCoO₃ was significantly inhibited by Glutathione (GSH), resulting in fading of blue oxTMB. Based on this, a colorimetric assay for GSH biosensing has been developed. And, the liner range for GSH detection is from 1 to 10 μM with a detection limit of 0.658 μM. The recovery of GSH with different concentrations from 90.0% to 105.9% and the relative standard deviation (RSD) from 1.9% to 5.1%. This colorimetric sensor can be used to detect GSH in real samples.

Recent advancement in biomedical applications on the surface of two-dimensional materials: from biosensing to tissue engineering

As biosensors and biomedical devices have become increasingly important to everyday diagnostics and monitoring, there are tremendous, and constant efforts towards developing and improving the reliability and versatility of such technology. As they offer high surface area-to-volume ratios and a diverse range of properties, from electronic to optical, two dimensional (2D) materials have proven to be very promising candidates for biological applications and technologies. Due to the dimensionality, 2D materials facilitate many interfacial phenomena that have shown to significantly improve the performance of biosensors, while recent advances in synthesis techniques and surface engineering methods also enable the realization of future biomedical devices. This short review aims to highlight the influence of 2D material surfaces and the properties that arise due to their 2D structure. Using recent (within the last few years) examples of biosensors and biomedical applications, we emphasize the important role of 2D materials in advancing developments and research for biosensing and healthcare.

The sp3/sp2 carbon ratio as a modulator of in vivo and in vitro toxicity of the chemically purified detonation-synthesized nanodiamond via the reactive oxygen species generation

Nanodiamonds have been suggested as biocompatible materials and are suitable for various biomedical applications, but little is known about how to synthesize safer nanodiamonds. Herein, seven different detonation-synthesized nanodiamonds (DNDs) with sequential sp³/sp² carbon ratios were assembled by controlling the chemical purification parameters and the role of sp³/sp² carbon ratio on the toxicity of DNDs was investigated. Carbon black and nickel oxide nanoparticles were used as reference particles. The intrinsic reactive oxygen species (ROS) generation potential of DNDs was estimated by a 2'7'-dichlorofluorescein diacetate (DCFH-DA) assay, and these values showed a good negative correlation with the sp³/sp² carbon ratios, which implies that ROS generation increased as the sp³/sp² carbon ratio decreased. As a model to investigate inflammogenic potential of DND samples, a rat intratracheal instillation model was used as the lung is very sensitive to nanoparticle exposures. The sp³/sp² carbon ratios or the estimated values of ROS generation potential showed excellent linear correlations with the number of neutrophils and pro-inflammatory cytokines in bronchoalveolar lavage fluid at 24 h after instillation. Treatment of DND samples to THP-1 derived macrophages also showed that the sp³/sp² carbon ratios or the estimated values of ROS generation potential were closely related with the toxicity endpoints such as cell viability and pro-inflammatory cytokines. Taken together, these data demonstrate that the sp³/sp² carbon ratio is the key determinant for the toxicity of DNDs, which can be a useful tool for the safer-by-design approach of DNDs and the safety assessment of carbon nanoparticles.

Synthesis of Carbon Dots and their Application as Turn Off-On Fluorescent Sensor for Mercury (II) and Glutathione

In this paper, we present a new method for the detection of mercury (II) and glutathione using carbon dots as fluorescent sensor. The synthesized carbon dots have the advantages of simple manipulation, low cost and the high fluorescence quantum yield of them which was22.79%. The combination of mercury (II) and carbon dots caused the turn off of carbon dots fluorescence. With the reaction between mercury (II) and glutathione, the carbon dots were released and the fluorescence was turned on when the glutathione added. According to this, the carbon dots could be developed to detect mercury (II) and glutathione specifically, and the detection limit of mercury (II) is as low as 0.41 μM.

Laser-induced breakdown spectroscopy as a novel readout method for nanoparticle-based immunoassays

Laser-induced breakdown spectroscopy (LIBS) was examined as a novel method for readout of microtiter plate immunoassays involving nanoparticles (NP). The so-called Tag-LIBS technique is a sensitive method for the detection of specific biomarkers. It was applied to the determination of NP labels using nanosecond ablation sampling. The NP labels were examined from the bottom of a standard 96-well microtiter plate. Thanks to the flexibility of LIBS instrumentation, both the plasma emission collection and the focusing optics arrangements can be collinearly arranged. The experiments showed that silver NPs and gold NPs can be readily quantified on the bottom of the microtiter plate. Utilizing this technique, a sandwich immunoassay for human serum albumin using streptavidin-coated AgNP labels was developed. The assay has a 10 ng·mL^-1 detection limit which is comparable to the sensitivity of fluorometric readout. The main advantage of this LIBS technique is its wide scope in which it enables a detection of almost any type of NP labels, irrespective to any fluorescence or catalytic properties. Owing to the immediate signal response, the relatively simple instrumentation also enables assay automation. The LIBS capability of multi-elemental analyses makes it a promising and fast alternative to other readout techniques, in particular with respect to multiplexed detection of biomarkers. Graphical abstract Laser-induced breakdown spectroscopy (LIBS) is used as a novel readout method of nanoparticle-based immunoassays in microtiter plates. After formation of sandwich immunocomplex, the analyte concentration is quantified as the signal of Ag nanoparticle labels determined by LIBS.

Sensitive fluorometric determination of glutathione using fluorescent polymer dots and the dopamine-melanin nanosystem

A bioinspired fluorometric method has been developed for the detection of glutathione (GSH) in biological fluids. It is based on the use of near-infrared fluorescent semiconducting polymer dots (P-dots) and of the dopamine (DA)-melanin nanosystem. The P-dots were prepared from poly(styrene-co-maleic anhydride), the semiconducting polymer poly[(9,9'-dioctyl-2,7-divinylenefluorenylene)-alt-2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene] and the fluorescent dye tetraphenylporphyrin. They have excitation/emission maxima at 458/656 nm, and this enables measurement to be performed with low autofluorescence and scattering background. DA can self-polymerize on the surface of the P-dots to yield a poly-DA coating. This coating, at weak alkaline pH values, causes the quenching of the fluorescence of the P-dots. However, the polymerization of DA is inhibited by GSH. Hence, quenching of fluorescence is prevented. This effect was used to design a fluorometric assay for GSH that has good selectivity and sensitivity. Under optimal conditions, the method has a linear response in the 0.2 to 20 μM GSH concentration range and a 60 nM detection limit. It was successfully applied to the determination of GSH in HepG2 cells and in spiked human serum. Graphical abstract Schematic representation of using a NIR fluorescent P-dots and dopamine (DA)-melanin nanohybrid as a probe for glutathione (GSH) detection. The P-dots were prepared from poly(styrene-co-maleic anhydride) (PSMA), the semiconducting polymer poly[(9,9'-dioctyl-2,7-divinylenefluorenylene)-alt-2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene] (PEPV) and the fluorescent dye tetraphenylporphyrin (TPP).The GSH can inhibit the dopamine self-polymerization and prevented the formation of PDA and fluorescence quenching of P-dots.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

The synthesis of thiol-stabilized silver nanoparticles and their application towards the nanomolar-level colorimetric recognition of glutathione

The synthesis and characterization of 5-methyl-1,3,4-thiadiazole-2-thiol fabricated silver nanoparticles and their application to detect glutathione.

Mustard seeds derived fluorescent carbon quantum dots and their peroxidase-like activity for colorimetric detection of H2O2 and ascorbic acid in a real sample

Herein, we were synthesized fluorescent carbon quantum dots via facile one-step hydrothermal treatment of mustard seeds (M-CQDs). It showed excellent optical property with fluorescent quantum yield 4.6%. The as-prepared M-CQDs exhibited peroxidase-like mimetic activity and catalyzed the oxidation of chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂ to produce a blue color reaction mixture with the prominent peak at 652 nm. Furthermore, the peroxidase-like catalytic performance of M-CQDs followed the steady-state kinetics behavior and exhibited similar catalytic activity as that of natural enzyme Horseradish peroxidase (HRP). In addition to this, the double reciprocal plot showed a parallel line which suggested the occurrence of Ping-Pong type of mechanism. The H₂O₂ dependent oxidation of TMB was helpful for the colorimetric detection of H₂O₂ in the linear range of 0.02-0.20 mM with the limit of detection (LOD) of 0.015 mM. Interestingly, the oxidized TMB (ox-TMB) was further reduced to native TMB by the reducing agent ascorbic acid. Hence M-CQDs showed its potential towards the selective and sensitive detection of ascorbic acid in the linear range of 10-70 μM having a correlation coefficient of 0.998 with LOD of 3.26 μM. The practical feasibility of the proposed detection method of AA was also investigated in common fresh fruits.

Colorimetric DNA assay by exploiting the DNA-controlled peroxidase mimicking activity of mesoporous silica loaded with platinum nanoparticles

A nanozyme composed of mesoporous silica and platinum nanoparticles (MS-PtNPs) was synthesized and is shown to display peroxidase-like activity. Its activity can be controlled by loading with single-stranded DNA. The PtNPs on the MS are homogeneously distributed and act as enzyme mimics. The adsorption of DNA probe on the MS blocks the nucleation sites of PtNPs. This leads to a decrease in the peroxidase-mimicking activity. After introduction of target DNA that is complementary to the DNA probe, the activity of the nanozyme is recovered. By using the 3,3,5,5-tetramethylbenzidine/H₂O₂ chromogenic system, a rapid method was developed for colorimetric determination of DNA. The assay, best performed at 450 nm, has a linear response in the 5 nM to 100 nM DNA concentration range and a 2.6 nM detection limit. It possesses high selectivity and can distinguish even a single-base mismatch. Graphical abstract The peroxidase-like activity of mesoporous silica and platinum nanoparticles (MS-PtNPs) was depressed when noncovalent ssDNA-MS was in-situ deposited on the PtNPs. After introduction of target DNA, the complementary dsDNA releases from the MS, and then its activity is recovered.

Gold core-satellite nanostructure linked by oligonucleotides for detection of glutathione with LSPR scattering spectrum

We demonstrated a sensitive method for detection of glutathione (GSH) based on LSPR scattering spectrum using gold core-satellite nanostructure linked by T-Hg²⁺-T base pair. The core-satellite assembly caused coupling between plasmonic nanoparticles, which inducing distinct change of LSPR peak wavelength. As the interaction between Hg²⁺ and GSH, the core-satellite nanostructure would be disassembled, which accompanied with spectral blue-shift of the scattering spectrum. By using this method, GSH could be quantitatively detected, and the detection limits can reach to 0.1 µM.

Colorimetric aptasensor for Campylobacter jejuni cells by exploiting the peroxidase like activity of Au@Pd nanoparticles

The authors describe a method for colorimetric determination of Campylobacter jejuni (C. jejuni) in milk samples. It is based on the interaction of a specific DNA aptamer with surface protein in the cell membranes of C. jejuni. Specific binding of the aptamer with the cell membrane leads to an uptake of aptamer from solution. As a result, the concentration of aptamer floating in the solution is reduced. In the presence of large quantities of aptamer, the surface of added Au@Pd nanoparticles (NPs) is covered with aptamer via electrostatic interactions. Hence, they cannot act as a peroxidase mimic and oxidize the substrate 3,3^',5,5^'-tetramethylbenzidine (TMB) to give a blue product. However, when the aptamer is bound by the target cells, the surface of the NPs is not blocked by aptamer and the NPs exert a strong peroxidase -like activity. Under defined experimental conditions, the intensity of the blue color increases with the concentration of C. jejuni, and as little as 100 CFU·mL^-1 can bedetected in milk. Graphical abstract A colorimetric aptasensor for assay Campylobacter jejuni whole cell in food samples was investigated. This assay was designed based on interaction of specific DNA aptamer with surface protein in c. jejuni cell membrane without any modification of aptamer.

Colorimetric determination of glutathione by using a nanohybrid composed of manganese dioxide and carbon dots

A kind of single-layer carbon based dots (CDs) with abundant carboxyl functional groups was hybridized with manganese dioxide (MnO₂). The resulting nanohybrid is stable and can be well dispersed in water. MnO₂ is capable of oxidizing the substrate 3,3'5,5'-tetramethylbenzidine (TMB) to form a blue product whose absorption (peaking at 655 nm) fades in the presence of glutathione (GSH). A sensitive and selective colorimetric GSH assay was worked out that has a linear response in the 10 to 0.1 µM GSH concentration range, with a 0.095 μM detection limit. The method was applied to the determination of GSH in spiked fetal calf serum where it gave excellent recoveries. Graphical abstract Schematic of the preparation of a nanohybrid composed of manganese dioxide and carbon based dots (MnO₂/CDs). They can be used for the colorimetric detection of glutathione (GSH) based on the color change of 3,3'5,5'-tetramethylbenzidine (TMB).