Nanoparticles of type Fe3O4-SiO2-graphene oxide and coated with an amino acid-derived ionic liquid for extraction of Al(III), Cr(III), Cu(II), Pb(II) prior to their determination by ICP-OES

Evaluation of Dithiocarbamate-Modified Silica for Cisplatin Removal from Water

Despite the globally increasing use of platinum-based cytostatic drugs in the treatment of several types of cancer, only limited attention has been paid to developing a treatment for contaminated liquid samples originating from hospitals, laboratories and manufacturing facilities before and after their administration. In this work, we assess the efficiency of a low-cost adsorbent material, a dithiocarbamate-functionalized silica, in removing cisplatin from a solution containing it in the 0.5–150 mg L−1 concentration range. The advantage of having a surface-functionalized silica is that adsorption can occur by either non-covalent interaction or surface complexation. In the latter case platinum(II) is de-complexed and the original drug is no longer present. Adsorption occurs through a first rapid step, followed by a second slower process. This is likely due to the fact that in our operating conditions (0.9% w/v NaCl), only the original compound is present, for which ligand substitution is known to proceed slowly. The interesting performance, even at low metal concentration, and facile synthesis of the material mean it could be adapted for other applications where the recycling of platinum can be realized.

Magnetic porous coordination networks for preconcentration of various metal ions from environmental water followed by inductively coupled plasma mass spectrometry detection

Magnetic composites of Fe₃O₄@SiO₂@PCN-224 (MPCN-224) was obtained by one-pot method with the interaction between PCN-224 monomer and silicon layer on magnetic core. MPCN-224 exhibited a core-shell structure with the specific surface area of 1114 m² g^-1 and good adsorption performance for various metal ions. With MPCN-224 used as the sorbent, a method combing magnetic solid phase extraction (MSPE) with inductively coupled plasma mass spectrometry (ICPMS) detection was established for the enrichment and determination of trace Cr(III), Zn(II), Pb(II) and Bi(III) in environmental water samples. Under the optimized conditions, the developed method exhibited low detection limits of 0.94-11.4 ng L^-1 and wide linear range for target four metal ions. The analysis speed was fast (2/5 min for adsorption and desorption respectively). The MPCN-224 sorbent could be reused for at least 12 times, and the regeneration can be achieved easily by adjusting solution pH. The sorbent and the MSPE-ICPMS method have a great potential for adsorption and determination of trace metal ions in environmental water samples.

Ionic liquid-based magnetic nanoparticles for magnetic dispersive solid-phase extraction: A review

Due to their highly tunable nature and outstanding physicochemical properties, ionic liquids (ILs) have been widely reported for use in the synthesis of multitudinous magnetic nanoparticles (MNPs). IL-based magnetic nanoparticles (IL-MNPs) have great potential in magnetic dispersive solid-phase extraction (MDSPE). At present, IL-MNPs have been successfully applied in the pretreatment of MDSPE samples from medicines, pesticides, veterinary drugs, heavy metals, dyes, additives, and proteins in agricultural products, foods and beverages, environmental water, and biological samples. In this review, the preparation of IL-MNPs and their application in MDSPE are comprehensively summarized. The structural characteristics of the introduced ILs used to prepare the IL-MNPs and the synthetic routes employed to obtain the IL-MNPs are described, including physical coating and chemical bonding methods. The IL-MNPs are then classified and described according to different modified materials, including silica-based materials, carbon-based materials, metal-organic frameworks, molecularly imprinted polymers and other interesting large/small molecules. Finally, the research prospects and development directions of IL-MNPs in the context of MDSPE are further identified.

Ethylenediaminetetraacetate functionalized ordered Santa Barbara Amorphous‐15 mesoporous silica as an effective adsorbent for preconcentration of some heavy metals followed by inductively coupled plasma atomic emission spectrometry

A simple and sensitive method was developed for preconcentration of the several transition metal ions using Santa Barbara Amorphous‐15 mesoporous silica functionalized with the ethylenediaminetetraacetate functional group. The determination of the metal ions was performed by inductively coupled plasma atomic emission spectrometry. The effective parameters on the extraction efficiency of the ions were investigated. The optimized conditions were: the sample solution pH 4, adsorbent amount = 10 mg, adsorption time = 30 min, elution solvent = 1.5 M of HCl, and desorption time = 5 min. Under the optimum conditions, limits of detection of 50, 5, 10, 50, 10, and 500 ng/L were obtained for Co2+, Mn2+, Cu2+, Cd2+, Zn2+, and Fe3+ respectively. The relative standard deviations for determination of the selected metal ions at concentration level of 50 μg/L (n = 4) were in the range of 1.7–5.8%. Linear ranges for Co2+ and Cd2+ (0.1–250 μg/L), Cu2+ and Zn2+ (0.05–250 μg/L), Fe3+ (1–250 μg/L), and Mn2+ (0.01–25 and 50–500 μg/L) were obtained with perfect correlation coefficients (R = 0.9958–0.9996, n = 8). The applicability of the method was evaluated by the extraction and determination of the heavy metal ions in different water samples.

Fe3O4–SiO2–graphene oxide–amino acid ionic liquid magnetic solid-phase extraction combined with inductively coupled plasma optical emission spectrometry for speciation of Cr(iii) and Cr(vi) in environmental water

This developed method, based on the combination of functionalized Fe3O4–SiO2–GO–AAIL and ICP-OES, is capable of remarkable selectivity towards Cr(iii).

Magnetically Recyclable Wool Keratin Modified Magnetite Powders for Efficient Removal of Cu2+ Ions from Aqueous Solutions

The treatment of wastewater containing heavy metals and the utilization of wool waste are very important for the sustainable development of textile mills. In this study, the wool keratin modified magnetite (Fe3O4) powders were fabricated by using wool waste via a co-precipitation technique for removal of Cu2+ ions from aqueous solutions. The morphology, chemical compositions, crystal structure, microstructure, magnetism properties, organic content, and specific surface area of as-fabricated powders were systematically characterized by various techniques including field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), thermogravimetric (TG) analysis, and Brunauer-Emmett-Teller (BET) surface area analyzer. The effects of experimental parameters such as the volume of wool keratin hydrolysate, the dosage of powder, the initial Cu2+ ion concentration, and the pH value of solution on the adsorption capacity of Cu2+ ions by the powders were examined. The experimental results indicated that the Cu2+ ion adsorption performance of the wool keratin modified Fe3O4 powders exhibited much better than that of the chitosan modified ones with a maximum Cu2+ adsorption capacity of 27.4 mg/g under favorable conditions (0.05 g powders; 50 mL of 40 mg/L CuSO4; pH 5; temperature 293 K). The high adsorption capacity towards Cu2+ ions on the wool keratin modified Fe3O4 powders was primarily because of the strong surface complexation of -COOH and -NH2 functional groups of wool keratins with Cu2+ ions. The Cu2+ ion adsorption process on the wool keratin modified Fe3O4 powders followed the Temkin adsorption isotherm model and the intraparticle diffusion and pseudo-second-order adsorption kinetic models. After Cu2+ ion removal, the wool keratin modified Fe3O4 powders were easily separated using a magnet from aqueous solution and efficiently regenerated using 0.5 M ethylene diamine tetraacetic acid (EDTA)-H2SO4 eluting. The wool keratin modified Fe3O4 powders possessed good regenerative performance after five cycles. This study provided a feasible way to utilize waste wool textiles for preparing magnetic biomass-based adsorbents for the removal of heavy metal ions from aqueous solutions.

Role of Ionic Liquids in Composites in Analytical Sample Preparation

Ionic liquids (ILs) are a group of non-conventional salts with melting points below 100 °C. Apart from their negligible vapor pressure at room temperature, high thermal stability, and impressive solvation properties, ILs are characterized by their tunability. Given such nearly infinite combinations of cations and anions, and the easy modification of their structures, ILs with specific properties can be synthesized. These characteristics have attracted attention regarding their use as extraction phases in analytical sample preparation methods, particularly in liquid-phase extraction methods. Given the liquid nature of most common ILs, their incorporation in analytical sample preparation methods using solid sorbents requires the preparation of solid derivatives, such as polymeric ILs, or the combination of ILs with other materials to prepare solid IL-based composites. In this sense, many solid composites based on ILs have been prepared with improved features, including magnetic particles, carbonaceous materials, polymers, silica materials, and metal-organic frameworks, as additional materials forming the composites. This review aims to give an overview on the preparation and applications of IL-based composites in analytical sample preparation in the period 2017–2020, paying attention to the role of the IL material in those composites to understand the effect of the individual components in the sorbent.

Sample Preparation Using Graphene-Oxide-Derived Nanomaterials for the Extraction of Metals

Graphene oxide is a compound with a form similar to graphene, composed of carbon atoms in a sp2 single-atom layer of a hybrid connection. Due to its significant surface area and its good mechanical and thermal stability, graphene oxide has a plethora of applications in various scientific fields including heterogenous catalysis, gas storage, environmental remediation, etc. In analytical chemistry, graphene oxide has been successfully employed for the extraction and preconcentration of organic compounds, metal ions, and proteins. Since graphene oxide sheets are negatively charged in aqueous solutions, the material and its derivatives are ideal sorbents to bind with metal ions. To date, various graphene oxide nanocomposites have been successfully synthesized and evaluated for the extraction and preconcentration of metal ions from biological, environmental, agricultural, and food samples. In this review article, we aim to discuss the application of graphene oxide and functionalized graphene oxide nanocomposites for the extraction of metal ions prior to their determination via an instrumental analytical technique. Applications of ionic liquids and deep eutectic solvents for the modification of graphene oxide and its functionalized derivatives are also discussed.

The fabrication of a thiol-modified chitosan magnetic graphene oxide nanocomposite and its adsorption performance towards the illegal drug clenbuterol in pork samples

A novel thiol (provided by (3-mercaptopropyl) trimethoxysilane, MPTS)-modified chitosan magnetic graphene oxide nanocomposite (Fe₃O₄@SiO₂/GO/CS/MPTS) was synthesized and characterized for the first time as an efficient magnetic sorbent for the enrichment and extraction of trace levels of clenbuterol in pork samples (muscle, fat, heart and liver). Various greatly influential parameters were optimized using a Box-Behnken design (BBD) through the response surface methodology (RSM) to obtain more satisfactory recovery. Under optimum conditions, the method detection limits (MDLs) were in the range of 0.054-0.136 ng g^-1. The recoveries of three spiked levels ranged from 84.7% to 101.1%, and the relative standard deviations (RSDs) were lower than 9.3%. The results of the adsorption experiments showed that the maximum adsorption capacity of Fe₃O₄@SiO₂/GO/CS/MPTS for clenbuterol was 214.13 mg g^-1. The adsorption process was most consistent with pseudo second-order kinetics and Langmuir adsorption isotherm, indicating a homogeneous process with a chemisorptive nature. Also, the nanocomposite exhibited high adsorption capability for clenbuterol compared with Fe₃O₄@SiO₂/GO and Fe₃O₄@SiO₂/GO/CS. In addition, regeneration of the nanocomposite was effectively achieved, and it retained about 82% of its initial capacity after four cycles. All these results indicate that the synthetic nanocomposite is a promising efficient adsorbent for the adsorption of clenbuterol with high adsorption capacity and low cost.

Imidazolium-based mesoporous organosilicas with bridging organic groups for microextraction by packed sorbent of phenoxy acid herbicides, polycyclic aromatic hydrocarbons and chlorophenols

The authors describe the preparation of two kinds of periodic mesoporous organosilicas (PMOs). The first kind is monofunctional and has a bridged alkyl imidazolium framework (PMO-IL). The other is a two-dimensional (2D) hexagonal bifunctional periodic mesoporous organosilica (BFPMO) with bridged IL-phenyl or -ethyl units. The CPMOs were utilized as highly sensitive and stable sorbents for microextraction by packed sorbent. The materials were characterized by SEM, TEM, FT-IR, and N₂ adsorption-desorption analysis. The adsorption capacities of the sorbents were investigated by using phenoxy acid herbicides as model analytes. The effects of bifunctionality and type of additional surface groups (phenyl or ethyl) on the efficiency of the extraction is emphasized. Three kinds of environmental contaminants, viz. phenoxy acid herbicides (CPAs), polycyclic aromatic hydrocarbons and chlorophenols were then studied with respect to their extraction by the sorbents. The interactions between the CPAs and the sorbents were evaluated by pH-changing processes to explore the interactions that play a major role. The selectivity of the sorbents was investigated by extraction of other types of analytes of with various polarity and charge. The BFPMOs display the typical good chemical stability of silica materials. The extraction properties are much better compared to commercial silicas. This is assumed to be due to the highly ordered mesoporous structures and the different types of probable interactions with analytes. The performance of the method was evaluated by extraction of CPAs as model analytes from aqueous samples, and quantification by GC with FID detection. Under optimized conditions, low limits of detection (0.1-0.5 μg.L^-1) and a wide linearity (0.5-200 μg.L^-1) were obtained. The method was applied to the trace analysis of CPAs in farm waters and rice samples. Graphical abstract Monofunctional periodic mesoporous organosilica with bridged alkyl imidazolium frameworks and bi-functional periodic mesoporous organosilica containing bridged ionic liquids and phenyl or -ethyl, have been successfully synthesized and utilized in microextractions by packed sorbent sorbents.

Applications of three-dimensional graphenes for preconcentration, extraction, and sorption of chemical species: a review

This review (with 115 refs) summarizes applications of 3-dimensional graphene (3DGs) and its derivatives in the fields of preconcentration, extraction, and sorption. Following an introduction into the field (including a definition of the materials treated here), the properties and synthetic strategies for 3DGs are described. The next section covers applications of 3DG-based adsorbents in solid phase extraction of organic species including drugs, phthalate esters, chlorophenols, aflatoxins, insecticides, and pesticides. Another section treats applications of 3DGs in solid phase microextraction of species such as polycyclic aromatic hydrocarbons, alcohols, and pesticides. We also describe how the efficiency of assays may be improved by using these materials as a sorbent. A final section covers conclusions and perspectives. Graphical abstract Graphical abstract contains poor quality and small text inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.Tiff file of graphical abstract was attached. Schematic presentation of synthesis of three-dimensional graphene (3DG) from two-dimensional graphene (2DG) with self-assembly, template-assisted and direct deposition methods. Application of 3DG-based nanoadsorbents in direct immersion-solid phase microextraction (DI-SPME), headspace-SPME (HS-SPME), magnetic-solid phase extraction (Magnetic-SPE), dispersive-SPE, and magnetic sheet-SPE.

Determination of Heavy Metal Ions and Organic Pollutants in Water Samples Using Ionic Liquids and Ionic Liquid-Modified Sorbents

Water pollution, especially by inorganic and organic substances, is considered as a critical problem worldwide. Several governmental agencies are listing an increasing number of compounds as serious problems in water because of their toxicity, bioaccumulation, and persistence. In recent decades, there has been considerable research on developing analytical methods of heavy metal ions and organic pollutants from water. Ionic liquids, as the environment-friendly solvents, have been applied in the analytical process owing to their unique physicochemical properties. This review summarizes the applications of ionic liquids in the determination of heavy metal ions and organic pollutants in water samples. In addition, some sorbents that were modified physically or chemically by ionic liquids were applied in the adsorption of pollutants. According to the results in all references, the application of new designed ionic liquids and related sorbents is expected to increase in the future.

Efficacy of engineered GO Amberlite XAD-16 picolylamine sorbent for the trace determination of Pb (II) and Cu (II) in fishes by solid phase extraction column coupled with inductively coupled plasma optical emission spectrometry

Graphene oxide (GO) was immobilized innovatively through azo spacer arm onto the surface of polymeric Amberlite XAD-16 resin in order to expose all oxygen functionalities freely available for metal ions coordination and further modification with picolylamine which governs selectivity. The GO Amberlite XAD-16 picolylamine enables the development of SPE column coupled with ICP-OES for preconcentration and determination of Pb (II) and Cu (II) in water and fish samples. Elution was performed by mild acid (2M HCl) no other carcinogenic organic solvent was used, prevents ligand leaching. Under optimized conditions, the preconcentration factors of 150 and detection limits 1.434 and 0.048 µg L⁻¹ for Pb (II) and Cu (II)  were obtained respectively.