Switched voltammetric determination of ractopamine by using a temperature-responsive sensing film

Ultrasensitive detection and photocatalytic degradation of polyketide drug tetracycline in environment and food samples using dual-functional Ag doped zinc ferrite embedded functionalized carbon nanofibers

The efficient degradation and accurate quantification of tetracycline in environment and food samples is pivotal for ensuring public health and safety by monitoring potential contamination and maintaining regulatory standards. Hence, in this study, photocatalytic degradation of tetracycline and its electrochemical detection in environment and food samples based on dual-functional silver-doped zinc ferrite nanoparticles embedded chitosan-functionalized carbon nanofibers fabricated on a screen-printed carbon electrode (AgZFO/CHIT-CNF/SPCE) is presented. A hydrothermal method was used in the synthesis of Ag-doped ZFO, and chitosan was functionalized on the CNF surface using a swift and cost-effective chemical modification process of carboxyl groups. Various techniques, such as XRD, HRTEM, elemental mapping, EIS, XPS, FTIR, VSM, BET, UV-Vis DRS, and Raman spectroscopy were used to analyze the characteristics of the prepared nanocomposite. Cyclic voltammetry and differential pulse voltammetry were used to evaluate the surface-controlled electrocatalytic properties of AgZFO/CHIT-CNF towards tetracycline. Electrochemical tests revealed that the proposed electrode exhibited excellent sensitivity for detecting tetracycline. The fabricated electrode had a low detection limit of 1 nM and a wide linear range (0.2-53.2 μM). The sensor also demonstrated exceptional selectivity, stability, and reusability. The practical feasibility evaluated with real samples, including chicken feed, shrimp, milk, soil, and wastewater, resulted in high recovery values.

Supramolecular recognition enhanced electrochemical sensing: β-cyclodextrin and Pd nanoparticle co-decorated 3D reduced graphene oxide nanocomposite-modified glassy carbon electrode for the quantification of ractopamine

Ractopamine (RAC) is universally known for improving lean meat percentage in livestock and thus is widely introduced as a feed additive. However, it is difficult to eliminate the RAC residue in animal tissues from the biological system and will inevitably harm human health. Hence, detecting RAC molecules in biological samples is extremely significant. Herein, a novel strategy of supramolecular recognition-enhanced electrochemical sensing is presented. This platform was constructed by coupling β-cyclodextrin (β-CD) with palladium nanoparticles (Pd NPs)-functionalized three-dimensional reduced graphene oxide (3D-rGO) to form a nanocomposite (3D-rGO/Pd/β-CD), which was further used to modify a glassy carbon electrode (GCE) for RAC detection. Benefiting from the attractive electrical conductivity and catalytic activity of 3D-rGO/Pd, as well as the unique small-molecule-recognition ability of β-CD demonstrated by ¹H NMR spectrum, which revealed the 1 : 2 binding mode of RAC with β-CD, increased peak current signals of RAC were observed in the cyclic voltammetry (CV) test. Under optimized conditions, the wide linear concentration range spanned 1-95 μM, along with a relatively low detection limit of 0.12 μM (S/N = 3), as evidenced by the differential pulse voltammetry (DPV) approach. The platform also exhibited satisfactory stability and fine reproducibility, as well as high selectivity and good anti-interference capability. Moreover, this as-obtained sensor was efficiently applied in pork samples with a high recovery rate (96.44-103.99%), which provides a promising view of its electrochemical biosensing ability in practical applications.

Nanomaterials based on thermosensitive polymer in biomedical field

The progress of nanotechnology enables us to make use of the special properties of materials on the nanoscale and open up many new fields of biomedical research. Among them, thermosensitive nanomaterials stand out in many biomedical fields because of their “intelligent” behavior in response to temperature changes. However, this article mainly reviews the research progress of thermosensitive nanomaterials, which are popular in biomedical applications in recent years. Here, we simply classify the thermally responsive nanomaterials according to the types of polymers, focusing on the mechanisms of action and their advantages and potential. Finally, we deeply investigate the applications of thermosensitive nanomaterials in drug delivery, tissue engineering, sensing analysis, cell culture, 3D printing, and other fields and probe the current challenges and future development prospects of thermosensitive nanomaterials.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Temperature-enabled reversible "On/Off" switch-like hazardous herbicide picloram voltammetric sensor in agricultural and environmental samples based on thermo-responsive PVCL-tethered MWCNT@Au catalyst

Picloram (PCR), a vastly utilized chlorinated herbicide, is very stable in water and soil with severe ecological and health impacts. It is necessary to establish a fast and highly sensitive technique for accurately detecting trace level PCR in agricultural and environmental samples. We employed a temperature-responsive poly(N-vinylcaprolactam)-tethered multiwalled carbon nanotubes (MWCNT-PVCL) decorated gold nanoparticles (Au@MWCNT-PVCL) catalyst on the electrochemical sensor for the sensitive "On/Off" switch-like detection of PCR. The effect of temperature-sensitive catalyst surface chemistry on electrocatalytic activity was scrutinized. Results showed that the hydrophilic surface of PVCL at 25 °C (<lower critical solution temperature (LCST)) extended to bury the electroactive sites of Au nanoparticles and MWCNT, and the PCR unable to pass over the PVCL to achieve electron exchange process, signifying the "Off" state. Surface wettability of the prepared Au@MWCNT-PVCL then spontaneously switched its hydrophilic to hydrophobic surface one at 40 °C (>LCST) that immensely upgraded PCR oxidation on the catalyst in the electrochemical reaction, signifying the "On" state. The detection of the Au@MWCNT-PVCL modified electrode ranged from 0.02-183 μM with a low detection limit (LOD) of 1.5 nM at 40 °C toward PCR. The proposed sensor was successfully used to detect PCR in real agricultural and environmental samples.

Ultramarine blue nanoparticles as a label for immunochromatographic on-site determination of ractopamine

A competitive immunochromatographic assay (ICA) is presented and used for on-site determination of ractopamine (RAC). Ultramarine blue nanoparticles were directly separated from ultramarine blue industrial products by centrifugation (< 10,000 rpm and > 4000 rpm) and used as visible labels in ICAs. The ultramarine blue nanoparticles were coated by polyacrylic acid (PAA), which provides carboxyl groups on the surface of ultramarine blue nanoparticles. An anti-RAC monoclonal antibody (mAb) was covalently immobilized on the carboxyl-modified ultramarine blue nanoparticle surface via diimide-activated conjugation between the carboxyl groups on the ultramarine blue nanoparticle surface and the amino groups of the antibodies. RAC and BSA-modified RAC competitively bind to the anti-RAC mAb on the ultramarine blue nanoparticles. The blue band in the test line is generated by the accumulation of ultramarine blue nanoparticles and is negatively associated with the RAC content. Under optimal conditions, the visual limit of detection (vLOD) of this ICA for RAC is 2.0 ng mL^-1, 2.0 ng mL^-1, and 1.0 ng mL^-1 in phosphate-buffered saline (PBS), feed samples, and pork samples, respectively. The ultramarine blue nanoparticle-based ICA also shows no cross activity with salbutamol, clorprenaline, clenbuterol, or terbutaline. Graphical abstract Schematic representation of the ultramarine blue nanoparticles immunochromatographic assay for detection of ractopamine (RAC) based on competitive method. The ultramarine blue nanoparticles were screened from commercial ultramarine pigments for the first time and used to detect ractopamine.

Stimuli-enabled switch-like paracetamol electrochemical sensor based on thermosensitive polymer and MWCNTs-GQDs composite nanomaterial

A temperature-controlled switchable electrochemical sensor was constructed based on a composite film consisting of thermosensitive block polymer poly(styrene-b-(N-isopropylacrylamide)-b-styrene) (PS-PNIPAm-PS), carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) and amino-functionalized graphene quantum dots (N-GQDs). The prepared sensor showed good temperature sensitivity and reversibility in sensing paracetamol. In the low temperature environment, the polymer stretched to bury the electroactive sites of the carbon nanocomposite, and the paracetamol could not pass through the polymer to achieve electronic exchange, representing the "closed" state. Conversely, in the high temperature environment, the polymer shrank to expose the electroactive sites and enlarge background currents, the paracetamol was able to undergo the redox reaction normally and generate the response current, representing the "on" state. In addition, the sensor had a wide detection range (0.1 to 7.0 μM and 7.0 to 103.0 μM) and a low LOD of 66 nM for paracetamol. This switch-like sensor provided a novel idea for the application of thermosensitive polymers.

Electrochemical dopamine sensor based on the use of a thermosensitive polymer and an nanocomposite prepared from multiwalled carbon nanotubes and graphene oxide

An electrochemical dopamine sensor with a temperature-controlled switch was constructed by using a mixture of thermo-sensitive block copolymers (type tBA-PDEA-tBA), graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs). If the temperature is below 26 °C, the polymer on the glassy carbon electrode (GCE) is stretched, the distance between the MWCNTs is large, and the charge transfer resistance (R_ct) of the composite also is large. In the presence of dopamine, the electron transfer at the electrode is strongly retarded and in the "off" state. At above 38 °C, the polymer is shrunk and the R_ct is much smaller. The presence of dopamine results in a rapid electron transfer at the GCE, and this is referred to as the "on" state. At temperatures between 26 and 38 °C, the polymer shrinks slightly and has a "spring-like" state. There is a linear relationship between the response current (typically measured at a potential as low as 0.16 V vs. Ag/AgCl) and temperature. The response to dopamine is linear in the 0.06 to 4.2 μM and 4.2 to 18.2 μM concentration range, and the detection limit is 42 nM. Conceivably, this approach provides a novel approach towards the design of electrochemical sensors based on the use of thermo-sensitive polymers. Graphical abstract Schematic presentation of reversible and temperature-controlled electrochemical response of dopamine on the thermo-sensitive block copolymers (tBA-PDEA-tBA) / multi-walled carbon nanotubes (MWCNTs) / graphene oxide (GO) / glassy carbon electrode (GCE).

Electrochemical sensors based on molecularly imprinted polymers on Fe3O4/graphene modified by gold nanoparticles for highly selective and sensitive detection of trace ractopamine in water

A novel molecular imprinting polymer (MIP)-based electrochemical senor, consisting of Fe3O4 nanobeads and gold nanoparticles on a reduced graphene oxide (RGO) substrate, was fabricated to detect ractopamine (RAC) in water using the reversible addition fragmentation chain transfer (RAFT) polymerization technique. The Au nanoparticles widely dispersed on RGO can significantly increase the response current for RAC detection in water, which is confirmed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and theoretical calculations. By means of the differential pulse voltammetry technique, the as-prepared MIP-based electrode shows a dynamic linear range of 0.002 to 0.1 μM with a correlation coefficient of 0.992 and a remarkably low detection limit of 0.02 nM (S/N = 3). Additionally, the sensor exhibits high binding affinity and selectivity towards RAC with excellent reproducibility. Our study demonstrates the potential for the proposed electrochemical sensors in monitoring organic pollutants in water.