Reduced graphene oxide functionalized with a CoS2/ionic liquid composite and decorated with gold nanoparticles for voltammetric sensing of dopamine

Synthesis of churros-like V2Se9 nanostructures for ultrasensitive electrochemical detection of oxalic acid in urine with portable point-of-care diagnostic devices

The binding of oxalic acid (OA) with metal ions, particularly calcium ions, is a key factor in kidney stone formation, as it produces insoluble calcium oxalate, which crystallizes and accumulates in the kidneys. Consequently, OA in urine is commonly considered a significant biomarker for clinical diagnosis and early screening of kidney stones. This study reports churros-like V2Se9 nanostructures synthesized using a solvothermal method (high pressure and temperature) for sensitive and selective electrochemical detection of OA in urine. The electrodes made of churros-like V2Se9 hybridized with reduced graphene oxide (rGO) for OA recognition, demonstrated a linear range from 20 nM to 4 mM, with an extremely low detection limit of 9.7 nM. To enable fast, user friendly, and accurate point-of-care testing (POCT) for OA in urine samples, we designed and developed a portable workstation integrated with smartphone for data visualization. This is the first study to utilize the V2Se9 system for highly sensitive biosensor applications, highlighting its potential to advance screening techniques for key indicators of kidney stones by incorporating novel transition metal chalcogenide nanomaterials in POCT devices.

Non-enzymatic electrochemical dopamine sensing probe based on hexagonal shape zinc-doped cobalt oxide (Zn-Co2O4) nanostructure

A non-enzymatic dopamine electrochemical sensing probe was developed. A hexagonal shape zinc-doped cobalt oxide (Zn-Co₂O₄) nanostructure was prepared by a facile hydrothermal approach. The combination of Zn, which has an abundance of electrons, and Co₃O₄ exhibited a synergistically electron-rich nanocomposite. The crystallinity of the nanostructure was investigated using X-ray diffraction. A scanning electron microscope (SEM) was used to examine the surface morphology, revealing hexagonal nanoparticles with an average particle size of 400 nm. High-resolution transmission electron microscopy (HR-TEM) was used to confirm the nanostructure of the doped material. The nanostructure's bonding and functional groups were verified using Fourier transform infrared spectroscopy (FTIR). The electrochemical characterization was conducted by using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and amperometry. The resistivity of the electrode was confirmed through EIS and showed that the bare glassy carbon electrode (GCE) exhibited higher charge transfer resistance as compared to modified Zn-Co₂O₄/GCE. The sensing probe was developed by modifying the surface of GCE with Zn-Co₂O₄ nanostructure and tested as an electrochemical sensor for dopamine oxidation; it operated best at a working potential of 0.17 V (vs Ag/AgCl). The developed sensor exhibited a low limit of detection (0.002 µM), a high sensitivity (126 µA. µM^-1 cm^-2), and a wide linear range (0.2 to 185 µM). The sensor showed a short response time of < 1 s. The sensor's selectivity was investigated in the presence of coexisting species (uric acid, ascorbic acid, adrenaline, epinephrine, norepinephrine, histamine, serotonin, tyramine, phenethylamine, and glucose) with no effects on dopamine determination results. The developed sensor was also successfully used for determining dopamine concentrations in a real sample.

Ultrasensitive detection of PCB77 based on Exonuclease III-powered DNA walking machine

In view of the urgent need to determine polychlorinated biphenyls (PCBs) in the environment, we report a simple and sensitive electrochemical aptasensor to detect 3,3',4,4'-tetrachlorobiphenyl (PCB77) based on Exonuclease III-powered Deoxyribonucleic Acid (DNA) walking machine using poly (diallyldimethylammonium chloride) (PDDA), which was functionalized hollow porous graphitic carbon nitride/ Ni-Co hollow nanoboxes/ Au-Pd-Pt nanoflowers composite material. Upon the addition of PCB77, the specific binding between PCB77 and the aptamer (Apt) could trigger the Exo III-assisted cyclic amplification process and release unlocking probes to deblock the Swing arm/Blocker duplex. Finally, the hybridized hairpin 3 (HP3), a short oligonucleotide, was left on the electrode via Exo III digestion of hybridized HP2, and thus a strong methylene blue (MB) signal was obtained. As expected, the proposed aptasensor exhibits exceptional PCB77 detection performances with a very low detection limit of 5.13 pg/L and a wide linear range of 0.01-100 ng/L based on the calibration curve. Moreover, the aptasensor presents a high level of selectivity and stability, with an acceptable degree of reproducibility. The results of this study have indicated that the proposed aptasensor has great potential application prospects, as demonstrated by its successful use in real environmental water samples.

Electrochemical Detection of Hydrazine by Carbon Paste Electrode Modified with Ferrocene Derivatives, Ionic Liquid, and CoS2-Carbon Nanotube Nanocomposite

The electrocatalytic performance of carbon paste electrode (CPE) modified with ferrocene-derivative (ethyl2-(4-ferrocenyl[1,2,3]triazol-1-yl)acetate), ionic liquid (n-hexyl-3-methylimidazolium hexafluorophosphate), and CoS2-carbon nanotube nanocomposite (EFTA/IL/CoS2-CNT/CPE) was investigated for the electrocatalytic detection of hydrazine. CoS2-CNT nanocomposite was characterized by field emission scanning electron microscopy, X-ray powder diffraction, and transmission electron microscopy. According to the results of cyclic voltammetry, the EFTA/IL/CoS2-CNT-integrated CPE has been accompanied by greater catalytic activities for hydrazine oxidation compared to the other electrodes in phosphate buffer solution at a pH 7.0 as a result of the synergistic impact of fused ferrocene-derivative, IL, and nanocomposite. The sensor responded linearly with increasing concentration of hydrazine from 0.03 to 500.0 μM with a higher sensitivity (0.073 μA μM-1) and lower limit of detection (LOD, 0.015 μM). Furthermore, reasonable reproducibility, lengthy stability, and excellent selectivity were also attained for the proposed sensor. Finally, EFTA/IL/CoS2-CNT/CPE was applied for the detection of hydrazine in water samples, and good recoveries varied from 96.7 to 103.0%.

Fabrication of 3D Ni/NiO/MoS2/rGO foam for enhancing sensing performance

The accurate electrochemical detection of dopamine (DA) is hard to achieve due to the serious interference of a substance with similar redox properties.

Synthesis of MOF525/PEDOT Composites as Microelectrodes for Electrochemical Sensing of Dopamine

Dopamine (DA) is an important neurotransmitter responsible for the functions and activities of multiple systems in human. Electrochemical detection of DA has the advantages of fast analysis and cost-effectiveness, while a regular electrode probe is restricted to laboratory use because the probe size is too large to be suitable for an in vivo or in vitro analysis. In this study, we have developed porphyrin-based metal organic framework (MOF525) and poly(3,4-ethylenedioxythiophene) (PEDOT)-based composites to modify microelectrode for DA detection. Two types of PEDOT monomers with different functional groups were investigated in this study. By varying the monomer ratios, electrolyte concentrations, and electropolymerization temperature, it was found that the PEDOT monomer containing carboxylic group facilitated the formation of regular morphology during the electropolymerization process. The uniform morphology of the PEDOT promoted the electron transmission efficiency in the same direction, while the MOF525 provided a large reactive surface area for electrocatalysis of DA. Thus, the MOF525/PEDOT composite improved the sensitivity-to-noise ratio of DA signaling, where the sensitivity reached 11 nA/μM in a good linear range of 4–100 µM. In addition, porphyrin-based MOF could also increase the selectivity to DA against other common clinical interferences, such as ascorbic acid and uric acid. The as-synthesized microelectrode modified with MOF525/PEDOT in this study exhibited great potential in real time analysis.

Sensitive measurement of tumor markers somatostatin receptors using an octreotide-directed Pt nano-flakes driven electrochemical sensor

Tumor markers play an important role in the early diagnosis and therapeutic effect monitoring of tumors. An electrochemical biosensor was developed based on multi-branched gold nanoshells (BGSs) and octreotide (OCT) functionalized Pt nano-flakes (PtNFs) modified electrodes, which was used for detection of tumor-specific markers to evaluate tumor cells. Sandwich-type nano-hybrid materials were prepared by layer-by-layer modification. First, reduced graphene oxide (RGO) and BGSs were modified as electronic materials onto glassy carbon electrodes (GCE). This modified electrode has strong electron transfer capability and large electrode surface area. The OCT was then anchored to the surface of BGSs to sensitively detect Somatostatin receptors (SSTRs) on the surface of HeLa cells. In addition, PtNFs were synthesized using a dual-template method, and OCT template on the surface of PtNFs, as an adsorption bioprobe, was used to reduce the H₂O₂ and amplify the electrochemical signal of biosensor. The proposed biosensor can be applied to the quantitative broad linear range of HeLa cells covering from 10 to 1 × 10⁶ cells mL^-1 (R² = 0.9998) and the limit of detection (LOD) was 2 cells mL^-1. The experimental results also show that the sensor has good stability, biocompatibility and high selectivity, which has great potential for clinical application.

Nonenzymatic amperometric dopamine sensor based on a carbon ceramic electrode of type SiO2/C modified with Co3O4 nanoparticles

An amperometric nonenzymatic dopamine sensor has been developed. Cobalt oxide (Co₃O₄) nanoparticles were uniformly dispersed inside mesoporous SiO₂/C. A sol-gel process was used for the preparation of this mesoporous composite material (SiO₂/C). This mesoporous composite has a pore size of around 13-14 nm, a large surface area (S_BET 421 m²·g^-1) and large pore volume (0.98 cm³·g^-1) as determined by the BET technique. The material compactness was confirmed by SEM images which showing that there is no phase segregation at the magnification applied. The chemical homogeneity of the materials was confirmed by EDX mapping. The SiO₂/C/Co₃O₄ nanomaterial was pressed in desk format to fabricate a working electrode for nonenzymatic amperometric sensing of dopamine at a pH value of 7.0 and at a typical working potential of 0.25 V vs SCE. The detection limit, linear response range and sensitivity are 0.018 μmol L^-1, 10-240 μmol L^-1, and 80 μA·μmol L^-1 cm^-2, respectively. The response timé of the electrode is less than 1 s in the presence of 60 μmol L^-1 of dopamine. The sensor showed chemically stability, high sensitivity and is not interfered by other electroactive molecules present in blood. The repeatability of this sensor was evaluated as 1.9% (RSD; for n = 10 at a 40 μmol L^-1 dopamine level. Graphical abstract Schematic presentation of the preparation of a nanostructured composite of type SiO₂/C/Co₃O₄ for electrooxidative sensing of dopamine.

Golf ball-like MoS2 nanosheet arrays anchored onto carbon nanofibers for electrochemical detection of dopamine

Arrays of molybdenum(IV) disulfide nanosheets resembling the shape of golf balls (MoS₂ NSBs) were deposited on carbon nanofibers (CNFs), which are shown to enable superior electrochemical detection of dopamine without any interference by uric acid. The MoS₂ NSBs have a diameter of ∼ 2 μm and are made up of numerous bent nanosheets. MoS₂ NSBs are connected by the CNFs through the center of the balls. Figures of merit for the resulting electrode include (a) a sensitivity of 6.24 μA·μM^-1·cm^-2, (b) a low working voltage (+0.17 V vs. Ag/AgCl), and (c) a low limit of detection (36 nM at S/N = 3). The electrode is selective over uric acid, reproducible and stable. It was applied to the determination of dopamine in spiked urine samples. The recoveries at levels of 10, 20 and 40 μM of DA are 101.6, 99.8 and 107.8%. Graphical abstract Schematic presentation of the golf ball-like MoS₂ nanosheet balls/carbon nanofibers (MoS₂ NSB/CNFs) by electrospining and hydrothermal process to detect dopamine (DA).

Au-polythionine nanocomposites: a novel mediator for bisphenol A dual-signal assay based on imprinted electrochemical sensor

In this work, a novel electrochemical sensor was developed by the modification of poly(p-aminobenzene sulfonic acid) (pABSA), Au-polythionine (Au-pTH) nanowires, and molecularly imprinted polymer (MIP) on glassy carbon electrode surface for bisphenol A (BPA) detection. The results of characterizations including scanning electron microscope, transmission electron microscopy, Fourier transform infrared spectra, and X-ray diffraction showed the successful synthesis of helical structural Au-pTH nanowires, which acted as an electro-active probe for BPA detection. Cyclic voltammetry results illustrated that the modified pABSA, Au-pTH, and MIP endowed the sensor with good electrocatalytic activity, the second current signal, and recognition ability, respectively. Since the imprinted cavities provided electron transfer channels for thionine (TH) redox, the peak current of TH can be found in a blank electrolyte. The added BPA molecules can be rebound in imprinted cavities, which are oxidized and then display its current. The rebound BPA molecules in turn blocked the electron transfer channels for TH redox, resulting in the decrease of TH current. A double signal defined, as the sum of the changes of TH current (∆i_TH|) and BPA current (|∆i_BPA|) (|∆i_TH|+|∆i_BPA|), was employed as the detected signal for BPA sensitive detection, which was linearly proportional to the logarithm of concentration of BPA ranging from 8.0 × 10^-8 to 1.0 × 10^-4 mol/L with a limit of detection of 3.8 × 10^-8 mol/L (S/N = 3) in a weakly acidic solution. Moreover, the natural recognition ability of MIP enabled the sensor to selectively detect BPA from its analogues. The proposed dual-signal strategy-based sensor provided a feasible tool for rapid, sensitive, and selective determination of BPA. Graphical abstract.

Rational design and facile synthesis of binary metal sulfides VS2-SnS2 hybrid with functionalized multiwalled carbon nanotube for the selective detection of neurotransmitter dopamine

In this work, we report a sensitive and selective electrochemical sensor for the detection of dopamine (DA) neurotransmitter based on VS₂-SnS₂/f-MWCNT hybrids. Herein, the binary metal sulfide (VS₂-SnS₂) was synthesized via single step hydrothermal route and hybrids with f-MWCNT via the ultrasonication process. The as-prepared VS₂-SnS₂/f-MWCNT hybrids were characterized through the FESEM, EDX and elemental mapping, TEM, XPS, Raman and XRD techniques. The electrochemical performance and catalytic activity of the modified electrodes were probed using electrochemical impedance spectra (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Interestingly, DPV results exhibits an appreciable linear range from 0.025 to 1017 μM and LOD of 0.008 μM. The selectivity study was performed to prove the high selectivity of the VS₂-SnS₂/f-MWCNT hybrids modified electrode. Furthermore, the practical applicability of the DA sensor was scrutinized in human serum sample and rat brain sample.

Visual distance readout to display the level of energy generation in paper-based biofuel cells: application to enzymatic sensing of glucose

Biofuel cells (BFCs) based on anodic oxidation and cathodic oxygen reduction represent an attractive alternative to self-powered devices. A glucose/oxygen BFC is described for monitoring glucose. It is making use of a piece of paper carrying a glucose oxidase (GOx) based bioanode, and a bilirubin oxidase (BilOx) based biocathode. The performance of the BFC is affected by the generation of H₂O₂, a byproduct of enzymatic glucose oxidation. Therefore, the removal of H₂O₂ is a crucial step in terms of BFC performance and stability. In addition, direct, unambiguous visual read-out is an ideal way to provide quantitative information. The colorimetric readout system described here is based on the consumption of undesired H₂O₂ and to convert the extent of energy generation into recognizable variations in color. As the H₂O₂ travels along the hydrophilic channel by capillary action, the formation of red gold nanoparticles from AuCl₄^- leads to the appearance of a red bar that provides distance-based information that can be read visually. The multiply readable information (maximum power density of BFC or visible distance) provides further choices for quantification. It also enhances reliability. The self-powered system based on the BFC exhibits excellent performance. Glucose can be determined by this method in the 1 to 50 mM concentration range. Graphical abstract Schematic presentation of a paper-supported biofuel cell equipped with a visual distance readout to display the level of energy generation in biofuel cells, and its application in sensing of glucose.

Low fouling electrochemical sensing in complex biological media by using the ionic liquid-doped conducting polymer PEDOT: application to voltammetric determination of dopamine

An electrochemical sensor that can resist biofouling even when operated in complex biological medium is developed for the determination of dopamine. It is based on the use of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) that is doped with the water insoluble ionic liquid (IL), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. A glassy carbon electrode modified with PEDOT/IL is shown to enable accurate determination of dopamine, as a model analyte in the presence of high concentrations of proteins, and resist biological fouling even in native serum. It exhibited a low limit of detection of 33 nM for the detection of dopamine, with a wide linear range from 0.2 to 328 μM (at 0.2 V vs. saturated calomel electrode). The PEDOT/IL modified glassy carbon electrode has a porous microstructure, high electrical conductivity and good stability. The sensor can be used to quantify dopamine in human urine samples with satisfying accuracy. Graphical abstract An antifouling electrochemical sensor capable of detecting target in complex biological samples was developed based on the use of a conducting polymer (PEDOT) that was doped with a water insoluble ionic liquid.

Environmental separation and enrichment of gold and palladium ions by amino-modified three-dimensional graphene

The excellent adsorption properties of three-dimensional graphene (3DG) can be further enhanced by triethylenetetramine modification to increase its adsorption capacity for precious metal ions. Herein, we successfully synthesized an amino-modified 3DG (N-3DG) adsorbent with improved adsorption conditions with regards to pH value, dosage, and adsorption time. Adsorption equilibrium was reached at pH 3 over 120 min. In addition, the theoretical basis for the adsorption of N-3DG is provided by fitting the adsorption isotherm model. The synthesized material was tested in seawater and lake water samples for the adsorption of precious metals, namely Au(iii) and Pd(ii), achieving a recovery rate of 87% to 106% as assessed by inductively coupled plasma mass spectrometry. Thus, N-3DG showed good adsorptivity. The present results indicate that N-3DG materials could have a viable application in environmental and sewage treatment in the near future.

Efficient selective 4-aminophenol sensing and antibacterial activity of ternary Ag2O3·SnO2·Cr2O3 nanoparticles

The electrochemical oxidation of 4-AP based on Ag₂O₃·SnO₂·Cr₂O₃ NPs/binder/GCE sensor.

A novel electrochemical analysis of the legal psychoactive drug caffeine using a zeolite/MWCNT modified carbon paste sensor

Caffeine (Caf) is a natural central nervous system stimulant categorized by the US Food and Drug Administration as a safe drug and its maximal amount in soft drinks has been approximately determined to be lower than 200 mg L⁻¹.

A hybrid nanocomposite of CeO2–ZnO–chitosan as an enhanced sensing platform for highly sensitive voltammetric determination of paracetamol and its degradation product p-aminophenol

A highly selective electrochemical sensor was fabricated based on CeO₂–ZnO–chitosan hybrid nanocomposite modified electrode and was successfully applied for the determination of PAR in pharmaceutical formulations.

A glassy carbon electrode modified with a bismuth film and laser etched graphene for simultaneous voltammetric sensing of Cd(II) and Pb(II)

Polyimide (PI) sheets were laser etched to obtain graphene-based carbon nanomaterials (LEGCNs). These were analyzed by scanning electron microscopy, X-ray diffraction and Raman spectroscopy which confirmed the presence of stacked multilayer graphene nanosheets. Their large specific surface and large number of edge-plane active sites facilitate the accumulation of metal ions. A glassy carbon electrode (GCE) with an in-situ plated bismuth film was modified with the LEGCNs to give a sensor with satisfactory response for the simultaneous determination of cadmium(II) and lead(II) by means of square wave anodic stripping voltammetry. It appears that is the first report on an electrochemical sensor based on the use of laser etched graphene for determination of heavy metal ions. Figures of merit for detection of Cd(II) include (a) a low and well separated working potential of -0.80 V (vs. Ag/AgCl), (b) a wide linear range (from 7 to 120 μg·L^-1), and a low detection limits 0.47 μg·L^-1. The respective data for Pb(II) are (a) -0.55 V, (b) 5 to 120 μg·L^-1, and (c) 0.41 μg·L^-1. The modified GCE displays remarkable repeatability, reproducibility, selectivity and stability. The sensor was applied to the simultaneous determination of Cd(II) and Pb(II) in spiked real water samples. The results confirm that the laser etching technique is an efficient tool for the preparation of carbon nanomaterials with high quality and great sensing performance. Graphical abstract Bismuth film and laser etched graphene-modified glassy carbon electrode (BF-LEGCN/GCE) for the simultaneous determination of cadmium(II) and lead(II) by square wave anodic stripping voltammetry.

Chitosan-magnetite nanocomposite as a sensing platform to bendiocarb determination

A novel platform for carbamate-based pesticide quantification using a chitosan/magnetic iron oxide (Chit-Fe₃O₄) nanocomposite as a glassy carbon electrode (GCE) modifier is shown for an analytical methodology for determination of bendiocarb (BND). The BND oxidation signal using GCE/Chit-Fe₃O₄ compared with bare GCE was catalyzed, showing a 37.5% of current increase with the peak potential towards less positive values, showing method's increased sensitivity and selectivity. Using square-wave voltammetry (SWV), calibration curves for BND determination were obtained (n = 3), and calculated detection and quantification limits values were 2.09 × 10^-6 mol L^-1 (466.99 ppb) and 6.97 × 10^-6 mol L^-1 (1555.91 ppb), respectively. The proposed electroanalytical methodology was successfully applied for BND quantification in natural raw waters without any sample pretreatment, proving that the GCE/Chit-Fe₃O₄ modified electrode showed great potential for BND determination in complex samples. ᅟ Graphical abstract.

N-(Aminobutyl)-N-(ethylisoluminol)-functionalized gold nanoparticles on cobalt disulfide nanowire hybrids for the non-enzymatic chemiluminescence detection of H2O2

N-(Aminobutyl)-N-(ethylisoluminol) (ABEI)-functionalized gold nanoparticles (AuNPs) on cobalt disulfide nanowires (ABEI/AuNPs/CoS2 NWs) are rapidly synthesized through a microwave-assisted reduction of chloroauric acid (HAuCl4) on CoS2 NWs with ABEI. The obtained nanohybrids with enhanced chemiluminescence are exploited for the non-enzymatic detection of H2O2.