A paper-based competitive lateral flow immunoassay for multi β-agonist residues by using a single monoclonal antibody labelled with red fluorescent nanoparticles

A comprehensive review of competitive lateral flow assays over the past decade

Competitive lateral flow assays (LFAs) provide a versatile and cost-effective platform for detecting a wide range of molecular targets across fields such as healthcare, food safety, and environmental monitoring, particularly for small analytes or single epitopes that lack suitable bioreceptor pairs. However, the interpretation of competitive LFAs can be challenging due to their counterintuitive output, where the absence of a test line signifies the presence of the target. In this review, we present a comprehensive overview of the fundamental strategies underlying competitive LFAs, explore the mathematical models that quantify assay performance, and outline the critical parameters involved in their design and optimization. We further highlight notable applications and discuss methods to enhance the user experience through improved result interpretation and user-centric design. By consolidating current knowledge and best practices, this work will serve as a valuable reference for researchers and developers seeking to refine the usability, reliability, and effectiveness of competitive LFAs.

3D-printed devices for multiplexed semi-quantitative competitive lateral flow immunoassays

Lateral flow immunoassays (LFIAs) are widely used for the simple and rapid detection of various targets at the point of need. However, LFIAs enabling the simultaneous detection of multiple analytes and the possibility for naked-eye semi-quantitative analysis are facing various challenges, including the requirement of large sample volumes, low efficiency, and accuracy. This is particularly the case for the competitive immunoassay format targeting the detection of low molecular weight compounds, such as, for example, drugs. Due to limited space for multiple reaction zones on a single planar nitrocellulose membrane, conducting multiplexed tests requires the addition of more test strips, which consequently increases the size of the whole device. To overcome these spatial constraints, two 3D-printed devices fitting eight assay lanes of both backed and unbacked nitrocellulose membranes have been designed. For proof of concept, 8-OHdG, caffeine, and acetaminophen were used as model analytes. Inkjet printing was applied to deposit capture reagents in the form of text symbols while controlling the concentration thresholds for text readability to achieve an intuitive result expression. A comparably small sample volume of 350 μL was sufficient to simultaneously visually distinguish 4 concentration levels of caffeine (0, 4, 10, 175 ng mL-1) and acetaminophen (0, 4, 8, 12 ng mL-1) in mixed solutions without crosstalk. This study demonstrates the potential of 3D-printed LFIA devices for multiplex and semi-quantitative analyte detection.

2-Phenethylamines in Medicinal Chemistry: A Review

A concise review covering updated presence and role of 2-phenethylamines in medicinal chemistry is presented. Open-chain, flexible alicyclic amine derivatives of this motif are enumerated in key therapeutic targets, listing medicinal chemistry hits and appealing screening compounds. Latest reports in discovering new bioactive 2-phenethylamines by research groups are covered too.

Analysis of virginiamycin M1 in swine feed, muscle and liver samples by quantum dots-based fluorescent immunochromatographic assay

Based on a highly sensitive and specific monoclonal antibody (mAb) against virginiamycin M1 (VIR M1), a quantum dots-based fluorescent immunochromatographic assay (QDs-ICA) for quick and sensitive analysis of VIR M1 was established for the first time. The mAb showed a half-maximal inhibitory concentration (IC₅₀) of 0.5 ng/mL and cross-reactivity (CR) values below 0.1% for other three analogues when used in enzyme-linked immunosorbent assay (ELISA). The mAb was conjugated to ZnCdSe/ZnS (core/shell) QDs with maximum emission wavelength of 610 nm (orange-red) which was selected as fluorescent probe to increase QDs-ICA sensitivity. The cut-off value of QDs-ICA was 12.5 ng/mL. QDs-ICA showed a linear range from 0.7 to 14.5 ng/mL with a limit of quantification of 0.7 ng/mL. Compared with existing methods for the analysis of VIR M1, the QDs-ICA exhibited higher sensitivity. For analysis of VIR M1 concentrations spiked into swine feed, muscle and liver samples, recovery rates ranged from 94.0% to 111.6% with the highest coefficient of variation (CV) of 6.7% for intra-assay, and for inter-assay ranged from 94.7% to 107.6% with the highest CV of 9.4%. In conclusion, the QDs-ICA could be a potential method for analyzing VIR M1 in animal feed and animal-derived food.

Paper-Based Fluidic Sensing Platforms for β-Adrenergic Agonist Residue Point-of-Care Testing

The illegal use of β-adrenergic agonists during livestock growth poses a threat to public health; the long-term intake of this medication can cause serious physiological side effects and even death. Therefore, rapid detection methods for β-adrenergic agonist residues on-site are required. Traditional detection methods such as liquid chromatography have limitations in terms of expensive instruments and complex operations. In contrast, paper methods are low cost, ubiquitous, and portable, which has led to them becoming the preferred detection method in recent years. Various paper-based fluidic devices have been developed to detect β-adrenergic agonist residues, including lateral flow immunoassays (LFAs) and microfluidic paper-based analytical devices (μPADs). In this review, the application of LFAs for the detection of β-agonists is summarized comprehensively, focusing on the latest advances in novel labeling and detection strategies. The use of μPADs as an analytical platform has attracted interest over the past decade due to their unique advantages and application for detecting β-adrenergic agonists, which are introduced here. Vertical flow immunoassays are also discussed for their shorter assay time and stronger multiplexing capabilities compared with LFAs. Furthermore, the development direction and prospects for the commercialization of paper-based devices are considered, shedding light on the development of point-of-care testing devices for β-adrenergic agonist residue detection.

Research on Rapid Detection Technology for β2-Agonists: Multi-Residue Fluorescence Immunochromatography Based on Dimeric Artificial Antigen

To detect two types of β2-agonist residues at the same time, we coupled two haptens of clenbuterol (CLE) and ractopamine (RAC) to the same carrier protein through diazotization to prepare dimeric artificial antigen, and a fluorescent lateral flow immunoassay method based on europium nanoparticles (EuNP-FLFIA) was established by combining polyclonal antibodies with europium nanoparticles to form probes. Under optimized conditions, the EuNP-FLFIA could simultaneously detect eight aniline-type and one phenol-type β2-agonists, and the limits of detection (LOD) were 0.11−0.19 ng/mL and 0.12 ng/mL, respectively. The recovery rate of this method was 84.00−114.00%. This method was verified by liquid chromatography−tandem mass spectrometry (LC-MS/MS), and the test results were consistent (R2 > 0.98). Therefore, the method established in this study could be used as a high-throughput screening for the efficient and sensitive detection of β2-agonists in food.

Broad-Spectrum Theranostics and Biomedical Application of Functionalized Nanomaterials

Nanotechnology is an important branch of science in therapies known as “nanomedicine” and is the junction of various fields such as material science, chemistry, biology, physics, and optics. Nanomaterials are in the range between 1 and 100 nm in size and provide a large surface area to volume ratio; thus, they can be used for various diseases, including cardiovascular diseases, cancer, bacterial infections, and diabetes. Nanoparticles play a crucial role in therapy as they can enhance the accumulation and release of pharmacological agents, improve targeted delivery and ultimately decrease the intensity of drug side effects. In this review, we discussthe types of nanomaterials that have various biomedical applications. Biomolecules that are often conjugated with nanoparticles are proteins, peptides, DNA, and lipids, which can enhance biocompatibility, stability, and solubility. In this review, we focus on bioconjugation and nanoparticles and also discuss different types of nanoparticles including micelles, liposomes, carbon nanotubes, nanospheres, dendrimers, quantum dots, and metallic nanoparticles and their crucial role in various diseases and clinical applications. Additionally, we review the use of nanomaterials for bio-imaging, drug delivery, biosensing tissue engineering, medical devices, and immunoassays. Understandingthe characteristics and properties of nanoparticles and their interactions with the biological system can help us to develop novel strategies for the treatment, prevention, and diagnosis of many diseases including cancer, pulmonary diseases, etc. In this present review, the importance of various kinds of nanoparticles and their biomedical applications are discussed in much detail.

Current Advances in Immunoassays for the Detection of β2-Agonists

β2-agonists are a group of synthetic phenylethanolamine compounds which are traditionally used for treating bronchospasm. These compounds can also increase skeletal muscle mass and decrease body fat. The illegal use of β2-agonists in food-producing animals results in residue of β2-agonists in edible tissues and causes adverse health effects in humans. Thus, the detection of β2-agonists at trace level in complex sample matrices is of great importance for monitoring the abuse of β2-agonists. Many methods have been developed to detect β2-agonists. Among them, a variety of antigen–antibody interaction-based techniques have been established to detect β2-agonists in various samples, including animal feed, urine, serum, milk, tissues and hair. In this review, we summarized current achievement in the extraction of β2-agonists from testing samples and detection of β2-agonists using immunological techniques. Future perspectives were briefly discussed.

Visible-light and near-infrared fluorescence and surface-enhanced Raman scattering point-of-care sensing and bio-imaging: a review

This review article deals with the concepts, principles and applications of visible-light and near-infrared (NIR) fluorescence and surface-enhanced Raman scattering (SERS) in in vitro point-of-care testing (POCT) and in vivo bio-imaging. It has discussed how to utilize the biological transparency windows to improve the penetration depth and signal-to-noise ratio, and how to use surface plasmon resonance (SPR) to amplify fluorescence and SERS signals. This article has highlighted some plasmonic fluorescence and SERS probes. It has also reviewed the design strategies of fluorescent and SERS sensors in the detection of metal ions, small molecules, proteins and nucleic acids. Particularly, it has provided perspectives on the integration of fluorescent and SERS sensors into microfluidic chips as lab-on-chips to realize point-of-care testing. It has also discussed the design of active microfluidic devices and non-paper- or paper-based lateral flow assays for in vitro diagnostics. In addition, this article has discussed the strategies to design in vivo NIR fluorescence and SERS bio-imaging platforms for monitoring physiological processes and disease progression in live cells and tissues. Moreover, it has highlighted the applications of POCT and bio-imaging in testing toxins, heavy metals, illicit drugs, cancers, traumatic brain injuries, and infectious diseases such as COVID-19, influenza, HIV and sepsis.

Development of a Kit for Rapid Immunochromatographic Detection of Sacbrood Virus Infecting Apis cerana (AcSBV) Based on Polyclonal and Monoclonal Antibodies Raised against Recombinant VP1 and VP2 Expressed in Escherichia coli

A Korean isolate of the sacbrood virus infecting Apis cerana (AcSBV-Kor) is the most destructive honeybee virus, causing serious economic damage losses in Korean apiculture. To address this, here, we attempted to develop an assay for the rapid detection of AcSBV-Kor based on immunochromatographic detection of constituent viral proteins. Genes encoding VP1 and VP2 proteins of AcSBV-Kor were cloned into an expression vector (pET-28a) and expressed in Escherichia coli BL21(DE3). During purification, recombinant VP1 (rVP1) and VP2 (rVP2) proteins were found in the insoluble fraction, with a molecular size of 26.7 and 24.9 kDa, respectively. BALB/c mice immunized with the purified rVP1 and rVP2 produced polyclonal antibodies (pAbs) such as pAb-rVP1 and pAb-rVP2. Western blot analysis showed that pAb-rVP1 strongly reacted with the homologous rVP1 but weakly reacted with heterologous rVP2. However, pAb-rVP2 strongly reacted not only with the homologous rVP2 but also with the heterologous rVP1. Spleen cells of the immunized mice fused with SP2/0-Ag14 myeloma cells produced monoclonal antibodies (mAbs) such as mAb-rVP1-1 and mAb-rVP2-13. Western blot analysis indicated that pAb-rVP1, pAb-rVP2, mAb-rVP1-1, and mAb-rVP2-13 reacted with AcSBV-infected honeybees and larvae as well as the corresponding recombinant proteins. These antibodies were then used in the development of a rapid immunochromatography (IC) strip assay kit with colloidal gold coupled to pAb-rVP1 and pAb-rVP2 at the conjugate pad and mAb-rVP1-1 and mAb-rVP2-13 at the test line. One antibody pair, pAb-rVP1/mAb-VP1-1, showed positive reactivity as low as 1.38 × 10³ copies, while the other pair, pAb-rVP2/mAb-VP2-13, showed positive reactivity as low as 1.38 × 10⁴ copies. Therefore, the antibody pair pAb-rVP1/mAb-VP1-1 was selected as a final candidate for validation. To validate the detection of AcSBV, the IC strip tests were conducted with 50 positive and 50 negative samples and compared with real-time PCR tests. The results confirm that the developed IC assay is a sufficiently sensitive and specific detection method for user-friendly and rapid detection of AcSBV.

The trends in nanomaterial-based biosensors for detecting critical biomarkers in stroke

Acute ischemic stroke (AIS), is the second global cause of death after cardiovascular diseases, accounts for 80-85% of cerebrovascular disease. Stroke diagnosis could be challenging in the acute phase. Detection of biomarkers for evaluating the prognosis of diseases is essential for improving personalized treatment and decreasing mortality. At the present time, the absence of a broadly existing and rapid diagnostic test is an important limitation in the evaluation and treatment of diseases. The use of a biomarker-based diagnostic attitude has confirmed very valuable in acute coronary syndromes, which has been promoted in acute stroke to help early management decisions. Over the past decade, different detection procedures have developed for the assessment of human cardiac troponins (cTnI). This review emphasizes on summarizing optical, and electrochemical biosensors for the detection of cTnI, brain natriuretic peptide (BNP), and neuron-specific enolase (NSE) as a critical biomarker in stroke.

Rapid, Quantitative, High-Sensitive Detection of Escherichia coli O157:H7 by Gold-Shell Silica-Core Nanospheres-Based Surface-Enhanced Raman Scattering Lateral Flow Immunoassay

Escherichia coli O157:H7 is regarded as one of the most harmful pathogenic microorganisms related to foodborne diseases. This paper proposes a rapid-detection biosensor for the sensitive and quantitative analysis of E. coli O157:H7 in biological samples by surface-enhanced Raman scattering (SERS)-based lateral flow immunoassay (LFIA). A novel gold-shell silica-core (SiO2/Au) nanosphere (NP) with monodispersity, good stability, and excellent SERS activity was utilized to prepare high-performance tags for the SERS-based LFIA system. The SiO2/Au SERS tags, which were modified with two layers of Raman reporter molecules and monoclonal antibodies, effectively bind with E. coli O157:H7 and form sandwich immune complexes on the test lines. E. coli O157:H7 was quantitatively detected easily by detecting the Raman intensity of the test lines. Under optimal conditions, the limit of detection (LOD) of the SiO2/Au-based SERS-LIFA strips for the target bacteria was 50 cells/mL in PBS solution, indicating these strips are 2,000 times more sensitive than colloidal Au-based LFIA strips. Moreover, the proposed assay demonstrated high applicability in E. coli O157:H7 detection in biological samples, including tap water, milk, human urine, lettuce extract and beef, with a low LOD of 100 cells/mL. Results indicate that the proposed SERS-based LFIA strip is applicable for the sensitive and quantitative determination of E. coli O157:H7.

Trace Biomolecule Detection with Functionalized Janus Particles by Rotational Diffusion

Cytokines are small proteins secreted by cells in innate and adaptive immune systems. Abnormal cytokine secretion is often regarded as an early cue of dysregulation of homeostasis due to diseases or infections. Early detection allows early medical intervention. In this study, a natural phenomenon called rotational Brownian motion was characterized by Janus particles and its potential use in detection of trace biomolecules explored. Through the functionalization of the Janus particles with an antibody, the target cytokine, that is, tumor necrosis factor-α, was measured in terms of rotational diffusion. Rotational diffusion is highly sensitive to the particle volume change according to the Stokes-Einstein-Debye relation and can be quantified by blinking signal. Accordingly, 1 μm half-gold and half-fluorescent microbeads were conjugated with 200 nm nanobeads through sandwiched immunocomplexes. The light source, lead time for stabilization, and purification were investigated for optimization. Particle images can be captured with green light at 5 Hz within 300 s. Under such conditions, the functionalized Janus particles eventually achieved a limit of detection of 1 pg/mL. The rotational diffusometry realized by Janus particles was power-free and feasible for ultrasensitive detection, such as early disease detection.

Quantitative and simultaneous detection of two inflammation biomarkers via a fluorescent lateral flow immunoassay using dual-color SiO2@QD nanotags

An on-site detection strategy is reported based on dual-color SiO₂@quantum dot (QD)-integrated lateral flow immunoassay (LFA) strip to realize the quantitative and simultaneous detection of C-reactive protein (CRP) and procalcitonin (PCT) in serum. The dual-color SiO₂@QD nanotags with monodispersity and excellent luminescence were synthesized using polyethyleneimine-mediated electrostatic adsorption of dense red CdSe/ZnS-COOH (excitation/emission 365/625 nm) or green CdSe/ZnS-COOH (excitation/emission 365/525 nm) QDs on the surface of 180 nm SiO₂ spheres and were conjugated with anti-PCT and anti-CRP monoclonal antibodies, as stable and fluorescent-enhanced QD nanotags in the LFA system. The use of SiO₂@QDs with two different fluorescent signals caused the sensitivity and specificity of the multiplex LFA system. As a result, the proposed assay provided a wide logarithmic determination range with a CRP quantitative range of 0.5-10³ ng/mL and PCT quantitative range of 0.05-10³ ng/mL. The limits of detection (LODs) of CRP and PCT reached 0.5 and 0.05 ng/mL, respectively. The SiO₂@QD-based LFA showed great potential as rapid detection tool for the simultaneous monitoring of CRP and PCT in serum sample.

Rapid Multi-Residue Detection Methods for Pesticides and Veterinary Drugs

The excessive use or abuse of pesticides and veterinary drugs leads to residues in food, which can threaten human health. Therefore, there is an extremely urgent need for multi-analyte analysis techniques for the detection of pesticide and veterinary drug residues, which can be applied as screening techniques for food safety monitoring and detection. Recent developments related to rapid multi-residue detection methods for pesticide and veterinary drug residues are reviewed herein. Methods based on different recognition elements or the inherent characteristics of pesticides and veterinary drugs are described in detail. The preparation and application of three broadly specific recognition elements-antibodies, aptamers, and molecular imprinted polymers-are summarized. Furthermore, enzymatic inhibition-based sensors, near-infrared spectroscopy, and SERS spectroscopy based on the inherent characteristics are also discussed. The aim of this review is to provide a useful reference for the further development of rapid multi-analyte analysis of pesticide and veterinary drug residues.

Sodium 4-styrenesulfonate functionalized nanofibers mat as 96-well plate solid-phase extraction adsorbent for quantitative determination of multiple β-agonists residues in pork samples

In this work, sodium 4-styrenesulfonate functionalized polyacrylonitrile nanofibers mat (SS/PAN NFM) was firstly prepared and applied as 96-well plate solid-phase extraction adsorbent for quantitative determination of seven β-agonists residues in pork samples. The functional modification endowed the SS/PAN NFM with superior adsorption performance for target β-agonists. The adsorption process is spontaneous (ΔG < 0), the initial adsorption rate can reach 6.03-9.09 mg/g/min and the maximum adsorption capacity is calculated to be 48.3 mg/g at 298 K. Moreover, SS/PAN NFM can be reused for 12 times without degradation in adsorption capability. Combined with UPLC-MS/MS, the limits of detection can reach 0.006-0.24 μg/kg, the recoveries ranged from 87.2% to 111% and the relative standard deviations of intra-day and inter-day precisions were in the scope of 1.75%-11.6% and 5.08%-13.5%, respectively. The obtained results fully demonstrated the practicability of this method in preventing the hazard of β-agonists residues.

Lateral flow biosensors based on the use of micro- and nanomaterials: a review on recent developments

This review (with 187 refs.) summarizes the progress that has been made in the design of lateral flow biosensors (LFBs) based on the use of micro- and nano-materials. Following a short introduction into the field, a first section covers features related to the design of LFBs, with subsections on strip-based, cotton thread-based and vertical flow- and syringe-based LFBs. The next chapter summarizes methods for sample pretreatment, from simple method to membrane-based methods, pretreatment by magnetic methods to device-integrated sample preparation. Advances in flow control are treated next, with subsections on cross-flow strategies, delayed and controlled release and various other strategies. Detection conditionst and mathematical modelling are briefly introduced in the following chapter. A further chapter covers methods for reliability improvement, for example by adding other validation lines or adopting different detection methods. Signal readouts are summarized next, with subsections on color-based, luminescent, smartphone-based and SERS-based methods. A concluding section summarizes the current status and addresses challenges in future perspectives. Graphical abstractRecent development and breakthrough points of lateral flow biosensors.

A review on advances in methods for modification of paper supports for use in point-of-care testing

Paper is a widely used support for use in devices for point-of-care testing (POCT) in clinical diagnosis, food safety monitoring and environmental pollution. Paper is inexpensive, biocompatible, biodegradable and allows a sample fluid to flow by capillary force. Numerous method have been developed recently for chemical modification of papers in order to introduce different functionalities. This review (with 148 refs.) summarizes the recent progress in paper-based POCT devices. The introduction summarizes the state of the art of paper-based POCT devices and the physicochemical properties of existing unmodified materials (including cellulose, cellulose-based composites, cotton fibers, glass fibers, nitrocellulose, thread). Methods for paper modification for sample pretreatment are summarized next, with subsections on sample storage and collection, sample separation, nucleic acid extraction and sample preconcentration. Another main section covers approaches for paper modification for improving POCTs, with subsections on assays for proteins, nucleic acids, drugs, ion and organic molecules. The advantages and disadvantages of these approaches are compared. Several tables are presented that summarize the various modification techniques. A concluding section summarizes the current status, addresses challenges and gives an outlook on future perspectives of POCTs. Graphical abstract This review summarizes the progress that has been made in paper based point-of-care testing (POCT) and lateral flow assays (LFAs), quite often by using advanced nanomaterials for paper modification.

Determination and removal of clenbuterol with a stable fluorescent zirconium(IV)-based metal organic framework

A metal organic framework (MOF) based adsorbent of type UiO-66 was hydrothermally prepared and applied to simultaneous sensing and removal of the asthma drug clenbuterol. The MOF possesses a large specific surface area (1460 cm²·g^-1) and a stable structure, and has a large adsorption capacity for clenbuterol (160 mg·g^-1). If clenbuterol binds to the MOF, the fluorescence of the sorbent (best measured at excitation/emission wavelengths of 290/396 nm) is quenched by up to 88%. Based on these findings, a fluorometric assay has been developed for the rapid determination of clenbuterol. The adsorption equilibrium of UiO-66 for CLB can be achieved at 60 min and the adsorption efficiency is above 80%. The method has a linear response in the 4.0 to 40 ng·mL^-1 concentration range, and the lower limit of detection is 0.17 μM. All of this indicates that UiO-66 is promising for simultaneous detection and the removal of CLB in water. Graphical abstract Schematic presentation of the detection and removal of clenbuterol in water medium by a stable fluorescent Zr(IV)-based metal organic framework. This method exhibited a large adsorption capacity for clenbuterol (160 mg/g) and low limit of detection (0.17 μM).

A silica nanoparticle based 2-color immunochromatographic assay for simultaneous determination of clenbuterol and ractopamine

An immunochromatographic assay (ICA) is presented that can be applied to simultaneous detection of clenbuterol (CLE) and ractopamine (RAC). It is making use of two red and blue silica nanoparticles (SiNPs) that act as labels for encoding the antibodies. This design permits multiplexed analysis in a single test line and does not require an external source for photoexcitation. Anti-CLE was labeled with red SiNPs, and anti-RAC with blue SiNPs. The capture antigens CLE-BSA and RAC-BSA were placed onto the conjugate pad and the test line of the test strip, respectively. Under bare eye examination, no cross-colored lines or nonspecific bioconjugate adsorption were observed, and the visible limit of detections for CLE (red) and RAC (blue) are 3 and 2 ng‧mL^-1, respectively. This design allows for multiplexed detection with reduced device dimensions and costs, and with easy integration and manufacturing. Conceivably, the method may be extended to simultaneous determination of numerous other analytes. Graphic abstract The principle of qualitative detection strategy of multiplex immunochromatographic assay for clenbuterol (CLE) and ractopamine (RAC) is schematically illustrated. Depending on the type and ratio of organic dyes, the color of colored silica nanoparticle can be tuned from red to purple and even to black (lower right corner).

Immunochromatographic fluorometric determination of clenbuterol with enhanced sensitivity

A method is described to enhance the sensitivity of an immunochromatographic assay for clenbuterol (CLE) by making use of dually-labeled gold nanoparticles (GNPs), background fluorescence blocking, and immunomagnetic separation. The GNPs were labeled with biotinylated antibody and streptavidin, respectively, and dually labeled GNPs were obtained via the biotin-streptavidin interaction to amplify the detection signal. The fluorescent signal was blocked by dually labeled GNPs and decreased as the dually labeled GNPs aggregation increases on nitrocellulose membrane, which derived from fluorescent polyvinylchloride card. However, fluorescence (measured at excitation/emission wavelengths of 518/580 nm) recovers when CLE reacts with dually labeled GNPs. Immunomagnetic separation was first applied for sample pretreatment. This can offset the matrix effect and improves the sensitivity and accuracy of the assay. Under the optimal conditions, the limits of detection of CLE visually were 0.25 μg·L^-1. In addition, clenbuterol can be quantified in swine urine with a 0.03 μg·L^-1 detection limit. This is 60-fold lower than current immunochromatography. Response is linear in the 0.06-0.59 μg·L^-1 concentration range, and the recoveries from spiked swine urine range from 81 to 115%." Graphical abstract Schematic presentation of the strategies for improving sensitivity of immunochromatographic assay. It includes immunomagnetic separations, dually-labeled gold nanoparticles and background fluorescence blocking. The assay was applied to detect clenbuterol (CLE) in swine urine with an excellent performance.

Designing Paper-Based Immunoassays for Biomedical Applications

Paper-based sensors and assays have been highly attractive for numerous biological applications, including rapid diagnostics and assays for disease detection, food safety, and clinical care. In particular, the paper immunoassay has helped drive many applications in global health due to its low cost and simplicity of operation. This review is aimed at examining the fundamentals of the technology, as well as different implementations of paper-based assays and discuss novel strategies for improving their sensitivity, performance, or enabling new capabilities. These innovations can be categorized into using unique nanoparticle materials and structures for detection via different techniques, novel biological species for recognizing biomarkers, or innovative device design and/or architecture.

Paper-based fluorometric immunodevice with quantum-dot labeled antibodies for simultaneous detection of carcinoembryonic antigen and prostate specific antigen

A method is described for simultaneous fluorometric determination of the biomarkers carcinoembryonic antigen (CEA) and prostate specific antigen (PSA) on the same zone of a paper-based immunodevice. Two kinds of CdTe quantum dots, with respective emission peaks at 525 nm and 605 nm under a single excitation wavelength of 272 nm, were used to label the antibodies against CEA and PSA. Then the capture antibodies of CEA and PSA were immobilized on the same zone of the paper-based device. With the difference of the colors of the quantum dot fluorescence (green and orange), CEA and PSA can be detected on the same zone of the paper-based device. By using of sandwich immunoassay format, CEA and PSA can be simultaneously detected in human serum samples with a linear response in the 1.0-40 ng·mL^-1 concentration range for both. The recovery rates of the serum sample were in the range of 95-105%. The method has the potential of being applied to the simultaneous determination of various other kinds of substances on a single multichannel paper-based chip. Graphical abstract Schematic presentation of the simultaneous fluorometric detection of two cancer biomarkers on the same zone of the paper-based immunodevice is provided. Two kinds of CdTe quantum dots with different emission peaks under the same excitation wavelength are labeled on different detection antibodies.

Multiplex Lateral Flow Immunoassay: An Overview of Strategies towards High-throughput Point-of-Need Testing

Simultaneous measurement of different substances from a single sample is an emerging issue for achieving efficient and high-throughput detection in several fields of application. Although immunoanalytical techniques have well-established and prevailing advantages over alternative screening analytical platforms, one of the incoming challenges for immunoassay is exact multiplexing. Lateral flow immunoassay (LFIA) is a leading immunoanalytical technique for onsite analysis, thanks to its simplicity, rapidity, and cost-effectiveness. Moreover, LFIA architecture is adaptable to multiplexing, and is therefore a possible answer to the pressing demand of multiplexing point-of-need analysis. This review presents an overview of diverse approaches for multiplex LFIA, with a special focus on strategies based on new types of magnetic, fluorescent, and colored labels.