Colorimetric and visual mercury(II) assay based on target-induced cyclic enzymatic amplification, thymine-Hg(II)-thymine interaction, and aggregation of gold nanoparticles

Intellectualized Visualization of Single-Particle Raman Spectra for Sensitive Detection and Simultaneous Multianalysis of Heavy Metal Ions

Easy-to-use, reliable, and real-time methods for detecting heavy metal ion contamination are urgently required, which is a primary concern for water pollution control and human health. However, present methods for this aim are still unable to achieve simultaneous multianalysis for complex real sample detection. Herein, an intellectualized vision-based single-nanoparticle Raman imaging strategy combined with ion-responsive functional nucleic acids (FNAs) was proposed to address these issues. We reported a correspondence between the concentration of the analytes and the density of particles (DOP) of specifically captured nanoparticles to achieve sensitive detection and simultaneous multianalysis of heavy metal ions. The specific detection of Pb2+ (Hg2+) was obtained with a detection linear range from 100 pM to 100 nM (from 500 fM to 100 nM) and limit of detections low to 1 pM (100 fM), with the advantages of good specificity, excellent homogeneity, and reproducibility. Furthermore, the differentiation of different heavy metal ions (Pb2+/Hg2+) was achieved, i.e., the simultaneous multianalysis, based on Raman imaging of the single particle and intelligent machine vision method. Finally, the Raman imaging assay was utilized for real sample analysis, and it provided a powerful and reliable tool for detecting trace Pb2+/Hg2+ in real water samples and facilitated the portable on-site monitoring of heavy metal ions.

Ultrasensitive colorimetric strategy for Hg2+ detection based on T-Hg2+-T configuration and target recycling amplification

A novelty aptasensor for ultrasensitive detection of Hg²⁺ is developed, exploiting the combination of plasmonic properties of gold nanoparticles (AuNPs) and exonuclease III (Exo III)-assisted target recycling for signal amplification. In the presence of Hg²⁺, a DNA duplex can be formed due to the strong coordination of Hg²⁺ and T bases of single-stranded DNA (ssDNA) probe. Exo III digests the DNA duplex from the 3' to 5' direction, resulting in the releasing of Hg²⁺. Then, the released Hg²⁺ binds with another ssDNA probe through T-Hg²⁺-T coordination. After Exo III-assisted Hg²⁺ cycles, numerous ssDNA probes are exhausted, which promotes poly(diallyldimethylammonium chloride) (PDDA)-induced AuNP aggregation, leading to an obvious color change and aggregation-induced plasmon red shift of AuNPs (from 520 to 610 nm). Therefore, this biosensor is ultrasensitive, which is applicable to the detection of trace level of Hg²⁺ with a linear range from 5 pM to 0.6 nM and an ultralow detection limit of 0.2 pM. Furthermore, it enables visual detection of Hg²⁺ as low as 50 pM by the naked eye. More importantly, the assay can be applied to the reliable determination of spiked Hg²⁺ in sea water samples with good recovery.

Photogenerated Hole-Induced Chemical-Chemical Redox Cycling Strategy on a Direct Z-Scheme Bi2S3/Bi2MoO6 Heterostructure Photoelectrode: Toward an Ultrasensitive Photoelectrochemical Immunoassay

To achieve high sensitivity for biomolecule detection in photoelectrochemical (PEC) bioanalysis, the ideal photoelectrode and ingenious signaling mechanism play crucial roles. Herein, the feasibility of the photogenerated hole-induced chemical-chemical redox cycling amplification strategy on a Z-scheme heterostructure photoelectrode was validated, and the strategy toward enhanced multiple signal amplification for advanced PEC immunoassay application was developed. Specifically, a direct Z-scheme Bi₂S₃/Bi₂MoO₆ heterostructure was synthesized via a classic hydrothermal method and served as a photoelectrode for the signal response. Under the illumination, the PEC chemical-chemical redox cycling (PECCC) among 4-aminophenol generated by the enzymatic catalysis from a sandwich immunoassay, ferrocene as a mediator, and tris (2-carboxyethyl) phosphine as a reducing agent was run on the Z-scheme Bi₂S₃/Bi₂MoO₆ heterostructure photoelectrode. Exemplified by interleukin-6 (IL-6) as the target, the applicability of the strategy was studied in a PEC immunoassay. Thanks to the multiple signal amplification originating from the high efficiency of the PECCC redox cycling system, the enzymatic amplification, and the fine performance of the Z-scheme Bi₂S₃/Bi₂MoO₆ heterostructure photoelectrode, the assay for IL-6 exhibits a very low detection limit of 2.0 × 10^-14 g/mL with a linear range from 5.0 × 10^-14 to 1.0 × 10^-8 g/mL. This work first validates the feasibility of the PECCC redox cycling on the Z-scheme heterostructure photoelectrode and the good performance of the strategy in PEC bioanalysis. We envision that it would provide a new prospective for highly sensitive PEC bioanalysis on the basis of a Z-scheme heterostructure.

A novel electrochemical biosensor for ultrasensitive Hg2+ detection via a triple signal amplification strategy

We developed a novel electrochemical biosensor for ultrasensitive Hg2+ detection via a triple signal amplification strategy of a DNA dual cycle, organic-inorganic hybrid nanoflowers (Cu3(PO4)2 HNFs) and gold nanoparticle (AuNP) probe. The DNA dual cycle was triggered by exonuclease III (Exo III) in the presence of Hg2+, and Cu3(PO4)2 HNFs were synthesized as an AuNP probe carrier. The electrochemical biosensor displayed high stability, high sensitivity and excellent specificity, which was improved by up to seven orders of magnitude compared to the World Health Organization (WHO) allowed Hg2+ levels in drinking water. This signal amplification strategy could be easily modified and extended to detect other hazardous heavy metals and nucleic acids.

Construction of DNA Biosensors for Mercury (II) Ion Detection Based on Enzyme-Driven Signal Amplification Strategy

Mercury ion (Hg²⁺) is a well-known toxic heavy metal ion. It is harmful for human health even at low concentrations in the environment. Therefore, it is very important to measure the level of Hg²⁺. Many methods, reviewed in several papers, have been established on DNA biosensors for detecting Hg²⁺. However, few reviews on the strategy of enzyme-driven signal amplification have been reported. In this paper, we reviewed this topic by dividing the enzymes into nucleases and DNAzymes according to their chemical nature. Initially, we introduce the nucleases including Exo III, Exo I, Nickase, DSN, and DNase I. In this section, the Exo III-driven signal amplification strategy was described in detail. Because Hg²⁺ can help ssDNA fold into dsDNA by T-Hg-T, and the substrate of Exo III is dsDNA, Exo III can be used to design Hg²⁺ biosensor very flexibly. Then, the DNAzyme-assisted signal amplification strategies were reviewed in three categories, including UO₂²⁺-specific DNAzymes, Cu²⁺-specific DNAzymes and Mg²⁺-specific DNAzymes. In this section, the Mg²⁺-specific DNAzyme was introduced in detail, because this DNAzyme has highly catalytic activity, and Mg²⁺ is very common ion which is not harmful to the environment. Finally, the challenges and future perspectives were discussed.

Sequential colorimetric sensing of cupric and mercuric ions by regulating the etching process of triangular gold nanoplates

A triangular gold nanoplate (AuNPL)-based colorimetric assay is presented for ultrasensitive determination of cupric ions (Cu²⁺⁾ and mercuric ions (Hg²⁺) in sequence. AuNPLs were found to be etched efficiently when producing triiodide ions (I₃^-) by a redox reaction between Cu²⁺ and iodide ions (I^-), leading to a change of the shape of AuNPLs from triangular to sphere along with a color change from blue to pink. In the presence of Hg²⁺ the etching of AuNPLs was suppressed due to the consumption of I^- by the formation of HgI₂. With an increase of the concentration of the Hg²⁺ a transformation from sphere to triangular in the shape of AuNPLs occurred with a color change from pink to blue. The evolution of AuNPLs from etching to anti-etching state by sequential addition of Cu²⁺ and Hg²⁺ was accompanied with color variations and band shifts of localized surface plasmon resonance (LSPR), allowing for visual and spectroscopic determination of Cu²⁺ and Hg²⁺ successively within 15 min. In the range 0.01-1.5 μM for Cu²⁺ and 0.02-3.0 μM for Hg²⁺, the linear relationship between the band shift values and the target ions concentration was found good (R² > 0.996). The limit of detections (3S/k) was 19 nM for Cu²⁺ and 9 nM for Hg²⁺, respectively. The lowest visual estimation concentration was 80 nM for both Cu²⁺ and Hg²⁺ through the distinguishable color changes. This system exhibited desirable selectivity for Cu²⁺ and Hg²⁺ over other common ions tested. The method has been successfully applied to sequential determination of Cu²⁺ and Hg²⁺ in real water and food samples. Graphical abstract Scheme 1 Schematic illustration for sequential detection of Cu²⁺ and Hg²⁺ based on etching of AuNPLs.

Aggregation-based determination of mercury(II) using DNA-modified single gold nanoparticle, T-Hg(II)-T interaction, and single-particle ICP-MS

An ultrasensitive assay is described for the detection and determination of Hg²⁺(aq) in water samples based on single-particle inductively-coupled plasma/mass spectrometry (spICP-MS). In the presence of Hg²⁺(aq), AuNPs modified with a segment of single-stranded DNA aggregate due to the formation of the well-known thymine (T)-Hg²⁺-T complex. Single particle (sp) ICP-MS is used quantify the degree of aggregation by the overall decrease in number of detected AuNPs or NP aggregates. Compared with most other Hg²⁺ assays that use the same principle of aggregation-dispersion with DNA modified AuNPs, this method has a much lower detection limit of (0.031 ng L^-1, 155 fM) and a wider (10,000-fold) linear range (up to 1 μg L^-1). The method also showed good practical potential because of its minimal interference from the water sample matrix. Graphical abstractSchematic representation of Hg²⁺ determination by using modified AuNP probes measured by spICP-MS. AuNPs pulses detected in ICP-MS is relative to the aggregation status of AuNPs based on thymine-Hg²⁺-thymine interaction.

L-Cysteine modified gold nanoparticles for tube-based fluorometric determination of mercury(II) ions

A fluorescent probe is described for detection of mercury(II) ion by using L-cysteine-modified gold nanoparticles (Cys-AuNP). These were fabricated by a tube-based redox reaction where Cys acts as both the reducing reagent and capping ligand. The Cys-AuNP display red fluorescence, with excitation/emission peaks at 373/625 nm. Owing to the high-affinity of the Hg(II)-Au(I) interaction and the Hg(II)/carboxy or amino group interaction, the presence of Hg(II) cause selective quenching the fluorescence, while other metal ions do not give such an effect. Based on these findings, a method was designed for the determination of Hg(II) that has attractive figures of merit. These include a low limit of detection (1.3 nM), a wide detection range (from 2 nM to 30µM), and excellent specificity. The method was applied to Hg(II) screening in (spiked) tap and river water, and it gave satisfactory results. Graphical abstract Schematic representation of the application of L-cysteine modified gold nanoparticles (Cys-AuNP) for qualitative and quantitative detection of mercury(II) ions. Based on the interaction between Cys-AuNP and mercury(II) ion to quench the red fluorescence of Cys-AuNP, the target mercury(II) can in turn be determined by a fluorometric method.

Fluorometric determination of mercury(II) by using thymine-thymine mismatches as recognition elements, toehold binding, and enzyme-assisted signal amplification

A highly sensitive fluorometric method is described for the determination of mercury(II) ions. It is based on (a) the use of a DNA probe containing thymine-thymine mismatches that are employed as Hg(II) recognition elements, (b) subsequent toehold binding, and (c) endocuclease-assisted signal amplification. Target recycling is triggered by exonuclease III. This produces a large amount of ssDNA (defined as primer). Then, the generated primer-initiated strand displacement reaction with the help of polymerase and nicking endonuclease releases the free fluorophore-labelled probe. Under excitation at 532 nm, the fluorescent probe displays emission with a peak at 582 nm. The sensitivity of this method is improved by introduction of nicking endonuclease. The working range of the assay extends from 20 pM to 10 nM, and the detection limit is as low as 6 pM of Hg(II). Graphical abstract Schematic presentation of the fluorometric method for determination of mercury(II). By using a special structure of thymine-thymine mismatches, target-induced toehold binding and enzyme-assisted signal amplification strategy were employed. This method is selective and good performance in real sample application.