Electrochemical dopamine sensor based on the use of a thermosensitive polymer and an nanocomposite prepared from multiwalled carbon nanotubes and graphene oxide

Intercalation of multilayered Ti3C2Tx electrode doped with vanadium for highly sensitive electrochemical detection of dopamine in biological samples

The electrochemical detection characteristics of the layered Ti3C2Tx material were enhanced by modifying its surface. Ti3C2Tx is used as the Ti - F chemical bond weakens with increasing pH levels. Ti3C2Tx is alkalinized by KOH, and F is substituted for - OH. The surface hydroxyl groups can be eliminated by intercalating K+. This study elaborates on the hydrothermal production of vanadium-doped layered Ti3C2Tx nanosheets intercalated with K+. The development of a sensitive dopamine electrochemical sensor is outlined by intercalating a vanadium-doped multilayered K+ Ti3C2Tx electrode. The chemical, surface, and structural composition of the synthesized electrode for dopamine detection was investigated and confirmed. The sensor exhibits a linear range (1-10 µM), a low detection limit (8.4 nM), and a high sensitivity of 2.746 µAµM-1cm-2 under optimal electrochemical testing conditions. The sensor also demonstrates exceptional anti-interference capabilities and stability. The sensor was applied to detection of dopamine in (spiked) rat brains, human serum, and urine samples. This study introduces a novel approach by utilizing K+ intercalation of vanadium-doped Ti3C2Tx-based electrochemical sensors and an innovative method for dopamine detection. The dopamine detection revealed the potential of (V0.05) K+ Ti3C2Tx-GCE for practical application in pharmaceutical sample analysis.

The Role of Catecholamines in the Pathogenesis of Diseases and the Modified Electrodes for Electrochemical Detection of Catecholamines: A Review

Catecholamines (CAs), which include adrenaline, noradrenaline, and dopamine, are neurotransmitters and hormones that critically regulate the cardiovascular system, metabolism, and stress response in the human body. The abnormal levels of these molecules can lead to the development of various diseases, including pheochromocytoma and paragangliomas, Alzheimer's disease, and Takotsubo cardiomyopathy. Due to their low cost, high sensitivity, flexible detection strategies, ease of integration, and miniaturization, electrochemical techniques have been extensively employed in the detection of CAs, surpassing traditional analytical methods. Electrochemical detection of CAs in real samples is challenging due to the tendency of poisoning electrode. Chemically modified electrodes have been widely used to solve the problems of poor sensitivity and selectivity faced by bare electrodes. There are a few articles that provide an overview of electrochemical detection and efficient enrichment of CAs, but there is a dearth of updates on the role of CAs in the pathogenesis of diseases. Additionally, there is still a lack of systematic synthesis with a focus on modified electrodes for electrochemical detection. Thus, this review provides a summary of the recent clinical pathogenesis of CAs and the modified electrodes for electrochemical detection of CAs published between 2017 and 2022. Moreover, challenges and future perspectives are also highlighted. This work is expected to provide useful guidance to researchers entering this interdisciplinary field, promoting further development of CAs pathogenesis, and developing more novel chemically modified electrodes for the detection of CAs.

Au-Pt-Ni nanochains as dopamine catalysts: role of elements and their spatial distribution

Multi-element materials can improve biosensing ability as each element can catalyze different steps in a reaction pathway. By combining Pt and Ni on self-assembled 1D gold nanochains and controlling their spatial distribution, a detailed understanding of each element's role in dopamine oxidation is developed. In addition, the developed synthesis process provides a simple way to fabricate multi-element composites for electrocatalytic applications based on electrical double-layer formation on the surface of charged nanoparticles. The performance parameters of the catalyst, such as its sensitivity, limit of detection, and range of operation for dopamine sensing, are optimized by changing the relative ratios of Pt : Ni and the morphology of the Pt and Ni domains, using the developed understanding. The morphology of the domains also affects the oxidation state of Ni, which is crucial to the performance of the electrocatalyst.

Determination of dopamine based on a temperature-sensitive PMEO2MA and Au@rGO-MWCNT nanocomposite-modified electrode

First, the nanocomposite Au@rGO-MWCNT was synthesized by a hydrothermal method. Next, a temperature-controlled composite sensing film was prepared by composite modification of poly(2-(2-methoxyethoxy)ethyl methacrylate) (PMEO₂MA) and Au@rGO-MWCNT on a glassy carbon electrode (GCE). This sensor was shown to exhibit good temperature sensitivity and reversibility to dopamine. When the testing temperature is lower than the lower critical solution temperature (LCST) of the polymer, the PMEO₂MA chain is in a stretched state, which increases the distance between the Au@rGO layers and leads to the inability of MWCNTs in one layer to contact another Au@rGO layer and to low conductivity. Therefore, in this state, dopamine cannot detect an electrochemical signal, and it is termed an "off" state. When the temperature is higher than the LCST of the polymer, the PMEO₂MA chain shrinks, allowing the MWCNTs to make contact with another layer of Au@rGO; the electron transfer rate of the modified film increases, and the electrochemical behavior of dopamine turns to an "on" state. Moreover, the sensor has a wide detection range (0.1 to 9.0 μM and 9.0 to 239.0 μM), and the limit of detection of dopamine is as low as 30 nM. This method has been successfully applied to the determination of dopamine in human serum samples. The on-off sensor provides a new avenue for the application of temperature-sensitive polymers.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Development of a Glucose Sensor Based on Glucose Dehydrogenase Using Polydopamine-Functionalized Nanotubes

The electrochemical-based detection of glucose is widely used for diagnostic purposes and is mediated by enzyme-mediated signal transduction mechanisms. For such applications, recent attention has focused on utilizing the oxygen-insensitive glucose dehydrogenase (GDH) enzyme in place of the glucose oxidase (GOx) enzyme, which is sensitive to oxygen levels. Currently used Ru-based redox mediators mainly work with GOx, while Ru(dmo-bpy)2Cl2 has been proposed as a promising mediator that works with GDH. However, there remains an outstanding need to improve Ru(dmo-bpy)2Cl2 attachment to electrode surfaces. Herein, we report the use of polydopamine-functionalized multi-walled carbon nanotubes (PDA-MWCNTs) to effectively attach Ru(dmo-bpy)2Cl2 and GDH onto screen-printed carbon electrodes (SPCEs) without requiring a cross-linker. PDA-MWCNTs were characterized by Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, and thermal gravimetric analysis (TGA), while the fabrication and optimization of Ru(dmo-bpy)2Cl2/PDA-MWCNT/SPCEs were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements. The experimental results demonstrate a wide linear range of glucose-concentration-dependent responses and the multi-potential step (MPS) technique facilitated the selective detection of glucose in the presence of physiologically relevant interfering species, as well as in biological fluids (e.g., serum). The ease of device fabrication and high detection performance demonstrate a viable pathway to develop glucose sensors based on the GDH enzyme and Ru(dmo-bpy)2Cl2 redox mediator and the sensing strategy is potentially extendable to other bioanalytes as well.

Sensitive electrochemical sensing platform for selective determination of dopamine based on amorphous cobalt hydroxide/polyaniline nanofibers composites

In this study, amorphous cobalt hydroxide/polyaniline nanofibers (Co(OH)₂/PANINF) composites were successfully prepared. The formation of amorphous Co(OH)₂ with irregular surface structure was confirmed by x-ray diffraction, scanning electron microscopy, and selected-area electron diffraction. The non-enzymatic electrochemical sensor for the selective and sensitive determination of dopamine (DA) has been constructed by using Co(OH)₂/PANINF composites modified glassy carbon electrode (Co(OH)₂/PANINF/GCE), which exhibited excellent electrocatalytic activity toward DA, in a large part owing to the advantages of large surface area of amorphous Co(OH)₂ and the synergetic effect between Co(OH)₂ and PANINF. The electrochemical kinetics reveal that the DA oxidation involves two electrons and two protons in a quasi-reversible electrode reaction. Differential pulse voltammetry (DPV) studies show remarkable sensing performance for the determination of DA, with a low detection limit of 0.03 μM, and a wide linear range from 0.1 to 200 μM. From a broader perspective, the present study demonstrates that Co(OH)₂/PANINF composites would be promising supporting materials for novel sensing platforms.

Reorientation of Polymers in an Applied Electric Field for Electrochemical Sensors

This mini review investigates the relationship and interactions of polymers under an applied electric field (AEF) for sensor applications. Understanding how and why polymers are reoriented and manipulated by under an AEF is essential for future growth in polymer-based electrochemical sensors. Examples of polymers that can be manipulated in an AEF for sensor applications are provided. Current methods of monitoring polymer reorientation will be described, but new techniques are needed characterize polymer response to various AEF stimuli. The unique and reproducible stimuli response of polymers elicited by an AEF has significant potential for growth in the sensing community.

A review on recent advancements in electrochemical biosensing using carbonaceous nanomaterials

This review, with 201 references, describes the recent advancement in the application of carbonaceous nanomaterials as highly conductive platforms in electrochemical biosensing. The electrochemical biosensing is described in introduction by classifying biosensors into catalytic-based and affinity-based biosensors and statistically demonstrates the most recent published works in each category. The introduction is followed by sections on electrochemical biosensors configurations and common carbonaceous nanomaterials applied in electrochemical biosensing, including graphene and its derivatives, carbon nanotubes, mesoporous carbon, carbon nanofibers and carbon nanospheres. In the following sections, carbonaceous catalytic-based and affinity-based biosensors are discussed in detail. In the category of catalytic-based biosensors, a comparison between enzymatic biosensors and non-enzymatic electrochemical sensors is carried out. Regarding the affinity-based biosensors, scholarly articles related to biological elements such as antibodies, deoxyribonucleic acids (DNAs) and aptamers are discussed in separate sections. The last section discusses recent advancements in carbonaceous screen-printed electrodes as a growing field in electrochemical biosensing. Tables are presented that give an overview on the diversity of analytes, type of materials and the sensors performance. Ultimately, general considerations, challenges and future perspectives in this field of science are discussed. Recent findings suggest that interests towards 2D nanostructured electrodes based on graphene and its derivatives are still growing in the field of electrochemical biosensing. That is because of their exceptional electrical conductivity, active surface area and more convenient production methods compared to carbon nanotubes. Graphical abstract Schematic representation of carbonaceous nanomaterials used in electrochemical biosensing. The content is classified into non-enzymatic sensors and affinity/ catalytic biosensors. Recent publications are tabulated and compared, considering materials, target, limit of detection and linear range of detection.

A ruthenium(IV) disulfide based non-enzymatic sensor for selective and sensitive amperometric determination of dopamine

An electrochemical dopamine (DA) sensor has been fabricated by modifying a glassy carbon electrode (GCE) with ruthenium disulfide (RuS₂) nanoparticles (NPs). FESEM and TEM micrographs show the NPs to have an average size of ~45 nm. XRD, Raman and EDS, in turn, confirm the successful formation of cubic phased RuS₂ NPs. The modified GCE displays has attractive features of merit that include (a) an ultra-low detection limit (73.8 nM), (b) fast response time (< 4 s), (c) a low oxidation potential (0.25 V vs. Ag|AgCl), (d) excellent reproducibility and stability, (e) an electrochemical sensitivity of 18.4 μA μM^-1 cm^-2 and 1.8 μA.μM^-1.cm^-2 in the linear ranges from 0.1-10 μM of DA (R² = 0.97) and 10-80 μM of DA (R² = 0.99), respectively. The sensor exhibits excellent specificity over potential interferents like ascorbic acid, glucose and uric acid. The superior performance of the sensor is attributed to its high electrical conductivity, large electro-active surface, and large numbers of exposed catalytically active sites resulting from the presence of unreacted sulfur atoms. Graphical abstract A ruthenium disulfide modified electrochemical sensor material was obtained by single-step hydrothermal synthesis. Sensitive and highly selective detection of dopamine is demonstrated.

Stimuli-enabled switch-like paracetamol electrochemical sensor based on thermosensitive polymer and MWCNTs-GQDs composite nanomaterial

A temperature-controlled switchable electrochemical sensor was constructed based on a composite film consisting of thermosensitive block polymer poly(styrene-b-(N-isopropylacrylamide)-b-styrene) (PS-PNIPAm-PS), carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) and amino-functionalized graphene quantum dots (N-GQDs). The prepared sensor showed good temperature sensitivity and reversibility in sensing paracetamol. In the low temperature environment, the polymer stretched to bury the electroactive sites of the carbon nanocomposite, and the paracetamol could not pass through the polymer to achieve electronic exchange, representing the "closed" state. Conversely, in the high temperature environment, the polymer shrank to expose the electroactive sites and enlarge background currents, the paracetamol was able to undergo the redox reaction normally and generate the response current, representing the "on" state. In addition, the sensor had a wide detection range (0.1 to 7.0 μM and 7.0 to 103.0 μM) and a low LOD of 66 nM for paracetamol. This switch-like sensor provided a novel idea for the application of thermosensitive polymers.