A voltammetric hybridization assay for microRNA-21 using carboxylated graphene oxide decorated with gold-platinum bimetallic nanoparticles

Simultaneous detection of ovarian cancer related miRNA biomarkers with carboxylated graphene oxide modified electrochemical biosensor platform

Ovarian cancer, known as "silent killer", is a gynocological cancer with high mortality that usually diagnosed in the late stages. Gold standard immunoassay technique is evaluation of CA-125 levels which is not merely specific to ovarian cancer. Therefore, there is a need for sensitive determination of more specific biomarkers. miR-200 family is RNA nucleic acids that known to be upregulated in the presence of ovarian cancer. Since diagnosis based on a single biomarker is prone to generate misleading results, it is important to develop point-of-care systems that allow diagnosis of multiple miRNAs. Herein, an electrochemical nanobiosensor platform was developed for the multiplexed and simultaneous detection of miR-200c and miR-141. Biorecognition part was constitutued of methylene blue and ferrocene labeled hairpin DNA probes immobilized onto carboxylated graphene oxide modified pencil graphite electrodes. Their hybridization with miRNAs were examined upon "signal-off" approach using Square Wave Voltammetry. The platform demonstrated a linear detection range of 0.1 pM to 10 nM for both miR-141 and miR-200c, with low detection limits of 0.029 pM and 0.026 pM, respectively. We assume that the developed biosensor platform may pave the way in early diagnosis of the disease and the development of more effective treatment strategies.

Amplifying the electrochemical footprint of <1000 molecules in a dissolving microdroplet

The ability of analytical strategies to detect and positively identify molecules under extremely dilute conditions is important for the growth and expansion of analytical techniques and instrumentation. At present, few measurement science techniques can robustly approach the measurement of just a few thousand molecules. Here, we present an electrochemical platform for the detection and positive identification of fewer than 1000 molecules of decamethylferrocene ((Cp*)2FeII). We achieve this remarkable detection threshold by trapping (Cp*)2FeII in a 1,2-dichloroethane microdroplet, which is allowed to dissolve into an aqueous continuous phase while on a gold microelectrode (radius ∼6.25 μm). Because electrochemistry is not sensitive enough to observe the charge of less than 1000 molecules, we dissolved μM amounts hexacyanoferrate(III) in the aqueous continuous phase. The biphasic reaction between hexacyanoferrate(III) and Cp2*(Fe)II allows for a feedback loop when the microelectrode is biased sufficiently negative to reduce Cp2*(Fe)III. This feedback loop, a typical EC' catalytic mechanism, amplifies the electrochemical signal of Cp2*(Fe)II when the droplet is of small enough dimensions for feedback to occur. Our results demonstrate that clever biphasic reactions can be coupled with dissolving microdroplets to access extremely low limits of quantitation in electroanalysis.

Nanomaterials promote the fast development of electrochemical MiRNA biosensors

Cancer has become the leading cause of death worldwide. In recent years, molecular diagnosis has demonstrated great potential in the prediction and diagnosis of cancer. MicroRNAs (miRNAs) are short oligonucleotides that regulate gene expression and cell function and are considered ideal biomarkers for cancer detection, diagnosis, and patient prognosis. Therefore, the specific and sensitive detection of ultra-low quantities of miRNA is of great significance. MiRNA biosensors based on electrochemical technology have advantages of high sensitivity, low cost and fast response. Nanomaterials show great potential in miRNA electrochemical detection and promote the rapid development of electrochemical miRNA biosensors. Some methods and signal amplification strategies for miRNA detection in recent years are reviewed herein, followed by a discussion of the latest progress in electrochemical miRNA detection based on different types of nanomaterial. Future perspectives and challenges are also proposed for further exploration of nanomaterials to bring breakthroughs in electrochemical miRNA detection.

Nanomaterials in electrochemical nanobiosensors of miRNAs

Nanomaterial-based biosensors have received significant attention owing to their unique properties, especially enhanced sensitivity. Recent advancements in biomedical diagnosis have highlighted the role of microRNAs (miRNAs) as sensitive prognostic and diagnostic biomarkers for various diseases. Current diagnostics methods, however, need further improvements with regards to their sensitivity, mainly due to the low concentration levels of miRNAs in the body. The low limit of detection of nanomaterial-based biosensors has turned them into powerful tools for detecting and quantifying these biomarkers. Herein, we assemble an overview of recent developments in the application of different nanomaterials and nanostructures as miRNA electrochemical biosensing platforms, along with their pros and cons. The techniques are categorized based on the nanomaterial used.

Signal Amplification-Based Biosensors and Application in RNA Tumor Markers

Tumor markers are important substances for assessing cancer development. In recent years, RNA tumor markers have attracted significant attention, and studies have shown that their abnormal expression of post-transcriptional regulatory genes is associated with tumor progression. Therefore, RNA tumor markers are considered as potential targets in clinical diagnosis and prognosis. Many studies show that biosensors have good application prospects in the field of medical diagnosis. The application of biosensors in RNA tumor markers is developing rapidly. These sensors have the advantages of high sensitivity, excellent selectivity, and convenience. However, the detection abundance of RNA tumor markers is low. In order to improve the detection sensitivity, researchers have developed a variety of signal amplification strategies to enhance the detection signal. In this review, after a brief introduction of the sensing principles and designs of different biosensing platforms, we will summarize the latest research progress of electrochemical, photoelectrochemical, and fluorescent biosensors based on signal amplification strategies for detecting RNA tumor markers. This review provides a high sensitivity and good selectivity sensing platform for early-stage cancer research. It provides a new idea for the development of accurate, sensitive, and convenient biological analysis in the future, which can be used for the early diagnosis and monitoring of cancer and contribute to the reduction in the mortality rate.

A Simple Label-Free Aptamer-Based Electrochemical Biosensor for the Sensitive Detection of C-Reactive Proteins

The level of C-reactive protein (CRP) in the human body is closely associated with cardiovascular diseases and inflammation. In this study, a label-free functionalized aptamer sensor was attached to an electrode trimmed with in-gold nanoparticles and carboxylated graphene oxide (AuNPs/GO-COOH) to achieve sensitive measurements relative to CRP. Gold nanoparticles were selected for this study due to super stability, remarkably high electrical conductivity, and biocompatibility. In addition, carboxylated graphene oxide was utilized to promote the anchorage of inducer molecules and to increase detection accuracies. The sensing signal was recorded using differential pulse voltammetry (DPV), and it produced a conspicuous peak current obtained at approximately -0.4 V. Furthermore, the adapted sensor manifested a broad linear span from 0.001 ng/mL to 100 ng/mL. The results also demonstrated that this aptamer sensor had superior stability, specificity, and reproducibility. This aptamer-based electrochemical sensor has enormous potential in complex application situations with interfering substances.

Current Perspectives in Graphene Oxide-Based Electrochemical Biosensors for Cancer Diagnostics

Since the first commercial biosensor device for blood glucose measurement was introduced in the 1970s, many “biosensor types” have been developed, and this research area remains popular worldwide. In parallel with some global biosensor research reports published in the last decade, including a great deal of literature and industry statistics, it is predicted that biosensor design technologies, including handheld or wearable devices, will be preferred and highly valuable in many areas in the near future. Biosensors using nanoparticles still maintain their very important place in science and technology and are the subject of innovative research projects. Among the nanomaterials, carbon-based ones are considered to be one of the most valuable nanoparticles, especially in the field of electrochemical biosensors. In this context, graphene oxide, which has been used in recent years to increase the electrochemical analysis performance in biosensor designs, has been the subject of this review. In fact, graphene is already foreseen not only for biosensors but also as the nanomaterial of the future in many fields and is therefore drawing research attention. In this review, recent and prominent developments in biosensor technologies using graphene oxide (GO)-based nanomaterials in the field of cancer diagnosis are briefly summarized.

Ultrasensitive detection of microRNA-21 by using specific interaction of antimonene with RNA as electrochemical biosensor

MicroRNA exhibits different levels of expression in cancer and can affect the transformation, metastasis, and carcinogenesis of the cancer cell. Herein, we developed a novel kind of electrochemical microRNA biosensor based on two-dimensional nanomaterial of antimonene nano-flakes (AMNFs) and carbon quantum dots (CQDs) which were used as substrating to cadmium ion (Cd²⁺) for specific detection of breast cancer-relevant biomarker-microRNA-21. Compared to graphene, the first principle energetic calculation shows that the AMNFs have completely a stronger force interaction with single strand (ssRNA), due to the antimonene has a more delocalized 5 s/5p orbital. After the addition of complementary microRNA, due to the low adsorption affinity of double-stranded RNA (dsRNA) to antimonene, the hybridized target is easy to desorb from the antimonene interface, and the oxidation peak of metal ions is significantly reduced. Results showed the microRNA-21 concentration can be detected from 100 aM to 1 nM, the limit of detection as low as 21 aM toward microRNA-21, which is 3 times lower than those of the established microRNA biosensors. The unique combination of not be attempted before existing sensing material which has special adsorption properties represents an approach to the detection of breast cancer. And it provides a promising method for early diagnosis, monitoring, and staging of breast cancer.

Facile Detection of Blood Creatinine Using Binary Copper-Iron Oxide and rGO-Based Nanocomposite on 3D Printed Ag-Electrode under POC Settings

Metal nanoparticles have been helpful in creatinine sensing technology under point-of-care (POC) settings because of their excellent electrocatalyst properties. However, the behavior of monometallic nanoparticles as electrochemical creatinine sensors showed limitations concerning the current density in the mA/cm² range and wide detection window, which are essential parameters for the development of a sensor for POC applications. Herein, we report a new sensor, a reduced graphene oxide stabilized binary copper-iron oxide-based nanocomposite on a 3D printed Ag-electrode (Fe-Cu-rGO@Ag) for detecting a wide range of blood creatinine (0.01 to 1000 μM; detection limit 10 nM) in an electrochemical chip with a current density ranging between 0.185 and 1.371 mA/cm² and sensitivity limit of 1.1 μA μM^-1 cm^-2 at physiological pH. Interference studies confirmed that the sensor exhibited no interference from analytes like uric acid, urea, dopamine, and glutathione. The sensor response was also evaluated to detect creatinine in human blood samples with high accuracy in less than a minute. The sensing mechanism suggested that the synergistic effects of Cu and iron oxide nanoparticles played an essential role in the efficient sensing where Fe atoms act as active sites for creatinine oxidation through the secondary amine nitrogen, and Cu nanoparticles acted as an excellent electron-transfer mediator through rGO. The rapid sensor fabrication procedure, mA/cm² peak current density, a wide range of detection limits, low contact resistance including high selectivity, excellent linear response (R² = 0.991), and reusability ensured the application of advanced electrochemical sensor toward the POC creatinine detection.

Nanotechnology in emerging liquid biopsy applications

Liquid biopsy is considered as the most attractive alternative to traditional tissue biopsies. The major advantages of this approach lie in the non-invasive procedure, the rapidness of sample collection and the potential for early cancer diagnosis and real-time monitoring of the disease and the treatment response. Nanotechnology has dynamically emerged in a wide range of applications in the field of liquid biopsy. The benefits of using nanomaterials for biosensing include high sensitivity and detectability, simplicity in many cases, rapid analysis, the low cost of the analysis and the potential for portability and personalized medicine. The present paper reports on the nanomaterial-based methods and biosensors that have been developed for liquid biopsy applications. Most of the nanomaterials used exhibit great analytical performance; moreover, extremely low limits of detection have been achieved for all studied targets. This review will provide scientists with a comprehensive overview of all the nanomaterials and techniques that have been developed for liquid biopsy applications. A comparison of the developed methods in terms of detectability, dynamic range, time-length of the analysis and multiplicity, is also provided.

A sensitive and label-free electrochemical microRNA biosensor based on Polyamidoamine Dendrimer functionalized Polypyrrole nanowires hybrid

The potential of functionalized polypyrrole nanowires (PPyNWs) are demonstrated as a platform for lable-free miRNA detection using electrochemical impedance spectroscopy (EIS). MicroRNAs (miRNAs) detection methods and sensors are mainly challenged by very low concentrations in physiological samples and high similarity among family members. Herein, a sensitive and selective miRNA biosensor was constructed based on electrochemically synthesized PPyNWs, which were functionalized with polyamidoamine dendrimer (PAMAM) by an electro-oxidation method. The prepared PPyNWs/PAMAM hybrid combines the excellent electrical conductivity of conducting polymer PPyNWs with high surface to volume ratio of PAMAM. DNA probes were immobilized onto the PPyNWs/PAMAM hybrid for the construction of the miRNA biosensor. Using the sensitive EIS technique to monitor DNA/miRNA hybridization, the developed biosensor demonstrated excellent sensing performances, such as wide linear range (10-14 M-10-8 M) and low detection limit (0.34 × 10-14 M). Even more encouraging, the response sensitivity of the biosensor was 3.12 times higher than that of the bulk PPy-modified sensor, which proved that the microstructure of the PPy nanowires array can greatly improve the performance of the biosensor. An ultrasensitive and selective miRNA biosensor was constructed based on electrochemically synthesized polypyrrole nanowires array (PPyNWs), which were functionalized with polyamidoamine dendrimer (PAMAM) by an electro-oxidation method.

Electrochemical detection of microRNA-21 based on a Au nanoparticle functionalized g-C3N4 nanosheet nanohybrid as a sensing platform and a hybridization chain reaction amplification strategy

Here, a sensitive sandwich-type electrochemical biosensor for microRNA-21 detection was reported. It was based on the use of a Au NP functionalized graphite-like carbon nitride nanosheet (g-C₃N₄ NS) nanohybrid (Au NPs-g-C₃N₄ NS) as a sensing platform and DNA concatemers containing methylene blue (MB) as a signal probe. The signal probe was prepared by using two different single strand DNAs with a complementary sequence (one of them labeled with MB at the 3' end) to form long concatemers via continuous hybridization chain reaction (HCR); thus numerous MB signal molecules were loaded on long concatemers. The biosensor was fabricated following the next step: a thiolated hairpin probe (HP) was first immobilized on the surface of the glassy carbon electrode (GCE) modified with a Au NPs-g-C₃N₄ NS nanohybrid. After it was blocked with MCH, the modified electrode was sequentially hybridized with microRNA-21 and a signal probe, respectively. As a result, a sandwich structure of HP-microRNA-signal probe covered the surface of the modified electrode. Differential pulse voltammetry (DPV) was employed to measure the sensing signal in phosphate buffered solution (0.10 M PBS, pH 7.4). The experimental conditions were optimized such as the hybridization time and the amount of g-C₃N₄ NS. The proposed biosensor exhibited a wide linear response range (1.0 fM to 500 nM) and a low limit of detection (0.33 fM; at S/N = 3) under the optimal conditions. Meanwhile, the biosensor could discriminate single base mismatched microRNA-21, indicating that the biosensor possessed high selectivity.

Electrochemical Biosensors for Detection of MicroRNA as a Cancer Biomarker: Pros and Cons

Cancer is the second most fatal disease in the world and an early diagnosis is important for a successful treatment. Thus, it is necessary to develop fast, sensitive, simple, and inexpensive analytical tools for cancer biomarker detection. MicroRNA (miRNA) is an RNA cancer biomarker where the expression level in body fluid is strongly correlated to cancer. Various biosensors involving the detection of miRNA for cancer diagnosis were developed. The present review offers a comprehensive overview of the recent developments in electrochemical biosensor for miRNA cancer marker detection from 2015 to 2020. The review focuses on the approaches to direct miRNA detection based on the electrochemical signal. It includes a RedOx-labeled probe with different designs, RedOx DNA-intercalating agents, various kinds of RedOx catalysts used to produce a signal response, and finally a free RedOx indicator. Furthermore, the advantages and drawbacks of these approaches are highlighted.

Signal-off photoelectrochemical determination of miRNA-21 using aptamer-modified In2O3@Cu2MoS4 nanocomposite

In₂O₃@Cu₂MoS₄ nanocomposite with superior photoelectrochemical (PEC) performance is used for the first time as a photoactivity material, and a signal-off PEC biosensing platform for miRNA detection has been successfully constructed. Firstly, the Cu₂MoS₄ nanosheets are synthesized by a hydrothermal method, and then, the homogeneous In₂O₃ nanoparticles (In₂O₃ NPs) are synthesized by calcination in the air. The In₂O₃@Cu₂MoS₄ nanocomposite is constructed with the Cu₂MoS₄ nanosheets as matrix and In₂O₃ NPs as sensitizer through a layer-by-layer assembly strategy. The nanocomposite with a tight interface and the matched band structure restrains the electron-hole pair recombination. Under visible light (400-700 nm), the nanocomposite exhibits a strong initial signal. With the catalyzed hairpin assembly, dozens of PbS quantum dots (QDs) are introduced on the surface of an electrode, significantly reducing the photocurrent of n-type In₂O₃@Cu₂MoS₄. Since PbS QDs can compete with the nanocomposite for light energy and electron donors, the signal decreased. Under optimal conditions, the biosensor manifests a broad linear range (1 fM-1 nM) and a low detection limit of about 0.57 fM, at a working potential of 0 V (vs. Ag/AgCl). The recovery of spiked human serum is between 94.0 and 102%, and the relative standard deviation (RSD) is between 1.3 and 2.7%. Therefore, the as-fabricated biosensor exhibits a potential for the determination of miRNA-21 in practical applications.Graphical abstract The In₂O₃@Cu₂MoS₄ nanocomposite owns a strong anode photocurrent signal, which can be used as a photoactive material to construct a "signal-off" biosensor for the detection of miRNA in non-enzymatically catalyzed hairpin assembly (CHA) reaction.

Electrochemical biosensor for miRNA-21 based on gold-platinum bimetallic nanoparticles coated 3-aminopropyltriethoxy silane

We report an electrochemical biosensor based on gold platinum bimetallic nanoparticles (AuPtBNPs)/3-aminopropyltriethoxy silane (APTS) nanocomposite coated fluorine-doped tin oxide (FTO) as a biosensing platform for hybridization-based detection of miRNA-21. Field Emission-Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared Spectroscopy (FT-IR) and electrochemical measurements were carried out to ensure the successful construction of the biosensor. The amount of cDNA immobilized on electrode surface and hybridization time required for the miRNA-21 sensing were optimized. The biosensing platform showed detection limit of 0.63 fM with wide linear range i.e. 1 fM-100 nM for miRNA-21 detection. The biosensing strategy demonstrates a good recovery yield from 90.18% to 94.6% in serum samples. It offers good selectivity for its complementary miRNA compared to the non-complementary miRNAs. Other analytical features of the biosensor such as stability, reusability and reproducibility were also tested, providing appropriate results.

New trends in the development of electrochemical biosensors for the quantification of microRNAs

MicroRNAs (miRNAs) are non-coding regulatory RNAs that play an important role in RNA silencing and post-transcriptional gene expression regulation. Since their dysregulation has been associated with Alzheimer disease, cardiovascular diseases and different types of cancer, among others, miRNAs can be used as biomarkers for early diagnosis and prognosis of these diseases. The methods commonly used to quantify miRNAs are, in general, complex, costly, with limited application for point-of-care devices or resource-limited facilities. Electrochemical biosensors, mainly those based on nanomaterials, have emerged as a promising alternative to the conventional miRNA detection methods and have paved the way to the development of sensitive, fast, and low-cost detection systems. This review is focused on the most relevant contributions performed in the field of electrochemical miRNAs biosensors between 2017 and the beginning of 2020. The main contribution of this article is the critical discussion of the different amplification strategies and the comparative analysis between amplified and non-amplified miRNA electrochemical biosensing and between the different amplification schemes. Particular emphasis was given to the importance of the nanostructures, enzymes, labelling molecules, and special sequences of nucleic acids or analogues on the organization of the different bioanalytical platforms, the transduction of the hybridization event and the generation the analytical signal.

A review on recent advancements in electrochemical biosensing using carbonaceous nanomaterials

This review, with 201 references, describes the recent advancement in the application of carbonaceous nanomaterials as highly conductive platforms in electrochemical biosensing. The electrochemical biosensing is described in introduction by classifying biosensors into catalytic-based and affinity-based biosensors and statistically demonstrates the most recent published works in each category. The introduction is followed by sections on electrochemical biosensors configurations and common carbonaceous nanomaterials applied in electrochemical biosensing, including graphene and its derivatives, carbon nanotubes, mesoporous carbon, carbon nanofibers and carbon nanospheres. In the following sections, carbonaceous catalytic-based and affinity-based biosensors are discussed in detail. In the category of catalytic-based biosensors, a comparison between enzymatic biosensors and non-enzymatic electrochemical sensors is carried out. Regarding the affinity-based biosensors, scholarly articles related to biological elements such as antibodies, deoxyribonucleic acids (DNAs) and aptamers are discussed in separate sections. The last section discusses recent advancements in carbonaceous screen-printed electrodes as a growing field in electrochemical biosensing. Tables are presented that give an overview on the diversity of analytes, type of materials and the sensors performance. Ultimately, general considerations, challenges and future perspectives in this field of science are discussed. Recent findings suggest that interests towards 2D nanostructured electrodes based on graphene and its derivatives are still growing in the field of electrochemical biosensing. That is because of their exceptional electrical conductivity, active surface area and more convenient production methods compared to carbon nanotubes. Graphical abstract Schematic representation of carbonaceous nanomaterials used in electrochemical biosensing. The content is classified into non-enzymatic sensors and affinity/ catalytic biosensors. Recent publications are tabulated and compared, considering materials, target, limit of detection and linear range of detection.

An electrochemical aptasensor for analysis of MUC1 using gold platinum bimetallic nanoparticles deposited carboxylated graphene oxide

A simple electrochemical strategy has been designed for the analysis of MUC1 using electrodeposited gold platinum bimetallic nanoparticles (Au-PtBNPs) on the surface of carboxylated graphene oxide (CGO)/FTO electrode as a signal amplification platform. The carboxylic groups of CGO were activated with EDS-NHS linker and subsequently immobilized with streptavidin for further deposition of biotin labelled aptamer. All the modification steps were characterized by FE-SEM, EDS mapping, FT-IR, contact angle measurements and electrochemical methods. After incubating with target protein MUC1, the aptaelectrode produced some concentration dependent responses which were measured electrochemically by DPV assay. The prepared aptasensor exhibits wide linear range from 1 fM-100 nM with detection limit of 0.79 fM under optimal experimental conditions. The performance of this aptaelectrode was also evaluated showing good selectivity, storage stability (15 days), reproducibility and reusability (up to 3 times). Furthermore, the applicability of the aptasensor for spiked serum samples showed recovery range from 92% to 97%.

2D Materials in Development of Electrochemical Point-of-Care Cancer Screening Devices

Effective cancer treatment requires early detection and monitoring the development progress in a simple and affordable manner. Point-of care (POC) screening can provide a portable and inexpensive tool for the end-users to conveniently operate test and screen their health conditions without the necessity of special skills. Electrochemical methods hold great potential for clinical analysis of variety of chemicals and substances as well as cancer biomarkers due to their low cost, high sensitivity, multiplex detection ability, and miniaturization aptitude. Advances in two-dimensional (2D) material-based electrochemical biosensors/sensors are accelerating the performance of conventional devices toward more practical approaches. Here, recent trends in the development of 2D material-based electrochemical biosensors/sensors, as the next generation of POC cancer screening tools, are summarized. Three cancer biomarker categories, including proteins, nucleic acids, and some small molecules, will be considered. Various 2D materials will be introduced and their biomedical applications and electrochemical properties will be given. The role of 2D materials in improving the performance of electrochemical sensing mechanisms as well as the pros and cons of current sensors as the prospective devices for POC screening will be emphasized. Finally, the future scopes of implementing 2D materials in electrochemical POC cancer diagnostics for the clinical translation will be discussed.

Facile and Label-Free Electrochemical Biosensors for MicroRNA Detection Based on DNA Origami Nanostructures

MicroRNAs (miRNAs) have emerged as the promising molecular biomarkers for early diagnosis and enhanced understanding of the molecular pathogenesis of cancers as well as certain diseases. Here, a facile, label-free, and amplification-free electrochemical biosensor was developed to detect miRNA by using DNA origami nanostructure-supported DNA probes, with methylene blue (MB) serving as the hybridization redox indicator, for the first time. Specifically, the use of cross-shaped DNA origami nanostructures containing multiple single-stranded DNA probes at preselected locations on each DNA nanostructure could increase the accessibility and the recognition efficiency of the probes (due to the rational controlled density of DNA probes). The successful immobilization of DNA origami probes and their hybridization with targeted miRNA-21 molecules was confirmed by electrochemical impedance spectroscopy and cyclic voltammetry methods. A differential pulse voltammetry technique was employed to record the oxidation peak current of MB before and after target hybridization. The linear detection range of this biosensor was from 0.1 pM to 10.0 nM, with a lower detection limit of 79.8 fM. The selectivity of the miRNA biosensor was also studied by observing the discrimination ability of single-base mismatched sequences. Because of the larger surface area and unprecedented customizability of DNA origami nanostructures, this strategy demonstrated great potential for sensitive, selective, and label-free determination of miRNA for translational biomedical research and clinical applications.