A fluorometric paper test for chromium(VI) based on the use of N-doped carbon dots

A colorimetric and electrochemical dual-mode system for identifying and detecting varied Cr species based on fungus-like porous CoS nanosensor

The differentiation of valence states plays a crucial role in determining the toxicity of chromium (Cr) in environmental samples. In this work, two modes of colorimetric and electrochemical analytical methods based on a fungus like porous CoS (FP CoS) nanosensor were developed for rapid, specific, and portable detection trace/ultra-trace chromium species (Cr(VI) and Cr(III)). The FP CoS exhibited peroxidase activity as a nanozyme for the colorimetric detection of Cr(VI), catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue oxidation product (oxTMB) in the presence of Cr(VI) instead of unstable H2O2 as an oxidizer at room temperature over existing methods. Based on the promotion of colorimetric reaction by increasing in Cr(VI) concentration, an effective colorimetric detection of Cr(VI) method was established with a detection limit (LOD) low to 3.93 μg L-1 and unique selectivity for Cr(VI) over 21 interfering ions (containing 15 metal ions and 6 anions). Innovatively, Cr(VI) could be reduced to Cr(III) without TMB, then selectively enriched by redox reaction with FP CoS. Hence, Cr (III) can be selectively and effectively enriched by FP CoS applying voltage, and then detected using cyclic voltammetry, with a lower LOD of 0.116 μg L-1 and high sensitivity ignoring background interferences. By integrating the dual-mode detection channel, the FP CoS nanosensor offers a convenient and flexible method for simultaneously determining Cr(VI), Cr(III), and total chromium in diverse samples.

Colorimetric and fluorometric sensing of polar E120 in juice and environmental water samples using mannitol-functionalized magnetic nanoparticles and nitrogen-doped carbon dots

In this study, mannitol-functionalized magnetic nanoparticles (MMNPs) as a unique nanosorbent and N-doped fluorescent carbon dots (N-CDs) as a cost-effective nanosensor were created and utilized, for the first time, for dispersive micro-solid-phase extraction (Dµ-SPE) to determine carmine (E120) dye in water samples and juices. The modification of the magnetic nanoparticles with mannitol was designed to enhance the responsive potential for adsorption of the polar E120 dye from complex sample matrices through electrostatic interaction. The as-fabricated N-CDs fluorescent probe exhibited a high fluorescence quantum yield (Φs) of 43.1 %, allowing for accurate fluorometric detection of E120 dye. The as-synthesized MMNPs nanosorbent and fluorescent N-CDs nanoprobe were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), thermogravimetric analysis (TGA), and vibrating-sample magnetometer (VSM). Density functional theory (DFT) studied the E120 dye structure using Gaussian 09 to explore the interactions between E 120 dye molecules and MMNPs/N-CDs. The impact of the critical adsorption and detection experimental factors was investigated and adjusted. A minimal amount of MMNPs nanosorbent (150 mg) is sufficient for E120 extraction in an acceptable time of 15 min. Furthermore, with a high determination coefficient, the adsorption characteristics fit with the models of Langmuir isotherm and first-order kinetics. The maximum adsorption capacity (qm) of the as-fabricated MMNPs was 87.7 mg.g-1. After adsorption, E120 dye was fluorometrically analyzed using nitrogen-doped carbon dots as a fluorescent nanosensor via the inner filter effect (IFE) mechanism. Under the optimized conditions, the proposed fluorometric procedures showed a linear increase in the fluorescence ratio with increasing the E120 concentration in the range of 1.0 - 160.0 μg.mL-1 with detection (LOD) and quantitation (LOQ) limits of 0.27 and 0.83 μg.mL-1, respectively. The relative standard deviation (%RSD) did not exceed 2.34 %. The proposed methodology was successfully applied to determine E120 dye in juice and environmental water samples with % recovery ranged from 89.2-106.1 % and 92.9-107.2 %, respectively offering a reliable and environmentally friendly alternative to traditional detection methods with potential applications across various industries.

Arsenic field test kits based on solid-phase fluorescence filter effect induced by silver nanoparticle formation

Millions of people worldwide are affected by naturally occurring arsenic in groundwater. The development of a low-cost, highly sensitive, portable assay for rapid field detection of arsenic in water is important to identify areas for safe wells and to help prioritize testing. Herein, a novel paper-based fluorescence assay was developed for the on-site analysis of arsenic, which was constructed by the solid-phase fluorescence filter effect (SPFFE) of AsH3-induced the generation of silver nanoparticles (AgNPs) toward carbon dots. The proposed SPFFE-based assay achieves a low arsenic detection limit of 0.36 μg/L due to the efficient reduction of Ag+ by AsH3 and the high molar extinction coefficient of AgNPs. In conjunction with a smartphone and an integrated sample processing and sensing platform, field-sensitive detection of arsenic could be achieved. The accuracy of the portable assay was validated by successfully analyzing surface and groundwater samples, with no significant difference from the results obtained through mass spectrometry. Compared to other methods for arsenic analysis, this developed system offers excellent sensitivity, portability, and low cost. It holds promising potential for on-site analysis of arsenic in groundwater to identify safe well locations and quickly obtain output from the global map of groundwater arsenic.

A detection system for serum cholesterol based on the fluorescence color detection of beta-cyclodextrin-capped gold nanoclusters

Cholesterol is one of the major markers for cardiovascular diseases. Herein, a portable cholesterol measurement system based on fluorescence color detection was constructed by combining the high sensitivity of fluorescence analysis with the ease of color sensing to determine low levels of serum cholesterol. Cyclodextrin capping gold nanoclusters with blue-green emission were used as fluorescent probes because cholesterol exposure induced fluorescence enhancement of the probe due to the host-guest inclusion interaction between cholesterol and the cavity of cyclodextrin. The integrated sensing system consisted of modules including a microprocessor, a power supply, an LED light with a constant current source, an RGB color sensor, a display, and a darkroom. All the modules except the display screen were placed in a 3D printing darkroom to avoid interference from ambient light. An RGB color sensor TCS230 was applied to capture the RGB signals of the fluorescent color of the probe solution before and after cholesterol addition. Then the obtained RGB signals were converted into the signals in Hue, Saturation, and Value (HSV) color space with a central control chip STM32F407. The Hue value of the fluorescent color of the solution can discriminate the concentration change of cholesterol. Experimental results demonstrate that the system responds linearly to cholesterol in the concentration range of 20.00 ∼ 150.00 μmol·L-1 with a detection limit of 16.07 μmol·L-1 (3σ, n = 3). The detection of the system has good consistency and accuracy compared with the standard instrument, showing potential for the detection of low levels of serum cholesterol.

One step synthesis of highly photoluminescent red light-emitting carbon dots from O-phenylenediamine and 2,4-diaminophenol as fluorescent probes for the detection of pH and Cr(VI)

In this study, new red light-emitting carbon dots (R-CDs) that can selectively recognize Cr(VI) were prepared using a strategy that utilizes 2,4-diaminophenol to enhance the fluorescence of O-phenylenediamine based carbon dots. The results showed that 2,4-diaminophenol increased the quantum yield (QY) of the carbon quantum dots (CDs), and that the QY of the CDs increased from their original value of 8.7% to 20.1% (R-CDs). The R-CDs show sensitivity to acidic conditions and maintain good linearity between pH = 1.00-4.00, making them useful as pH probes. Furthermore, the prepared R-CDs possess good solubility in water and are responsive to changes in Cr(VI) concentrations in aqueous environments. The quenching of the R-CDs fluorescence was linearly correlated with the Cr(VI) concentration within a range of 0-20 μM, with a lower detection limit of 66 nM. The detection mechanism is attributed to the formation of hydrogen bonds between Cr(VI) and the R-CDs, resulting in the fluorescence quenching of the R-CDs. The R-CDs can be considered effective multifunctional fluorescent probes for both pH and Cr(VI) in aqueous environments. This study will provide new R-CD design strategies for probes that selectively identify specific target substances.

Tailoring Acid Free-Paper based Analytical Devices (Af-PADs) via radiation assisted modification of cellulose paper

A novel green fabrication approach is being proposed based on radiation assisted modification of Whatman filter paper 1 (WFP) for development of Acid Free-Paper based Analytical Devices (Af-PADs). Af-PADs exude immense potential as handy tools for on-site detection of toxic pollutants such as, Cr(VI), boron, etc., which have established detection protocols involving acid mediated colorimetric reactions that necessitate external acid addition. The proposed Af-PAD fabrication protocol asserts its novelty through elimination of external acid addition step, making the detection process safer and simpler. To achieve this, poly(acrylic acid) (PAA) was grafted onto WFP via a single step, room temperature process of gamma radiation induced simultaneous irradiation grafting, introducing acidic -COOH groups in the paper thereon. Grafting parameters namely, absorbed dose and concentrations of monomer, homopolymer inhibitor and acid were optimized. The -COOH groups incorporated in PAA-grafted-WFP (PAA-g-WFP) provide localized acidic conditions for colorimetric reactions between pollutants and their sensing agents, anchored on the PAA-g-WFP. Af-PADs loaded with 1,5-diphenylcarbazide (DPC) have been ably demonstrated for visual detection and quantitative estimation of Cr(VI) in water samples using RGB image analysis, with LOD value of 1.2 mg.L^-1 and a measurement range comparable to that of commercially available PADs based Cr(VI) visual detection kits.

Ag2S QDs integration with MnO2 nanosheets for the sensitive detection of Cr (VI) via the redox reaction induced photoelectrochemical variation

The heavy metal Cr (VI) will remain, accumulate, and migrate after entering the environment or ecosystem, causing serious harm to the environment. Here, a photoelectrochemical sensor was developed for Cr (VI), utilizing the Ag₂S quantum dots (QDs) and MnO₂ nanosheets as photoactive components. By introducing Ag₂S QDs with a narrow gap, a staggered energy level match is created which effectively prevents the carrier recombination in MnO₂ nanosheets, resulting in an enhanced photocurrent response. In the presence of the electron donor, l-ascorbic acid (AA), the photocurrent of the Ag₂S QDs and MnO₂ nanosheets modified photoelectrode is further enhanced. As AA has the ability to convert Cr (VI) to Cr (Ⅲ), the photocurrent may decline due to the decrease in the electron donors when Cr (VI) is added. This phenomenon can be utilized for the sensitive detection of Cr (VI) over a wider linear range (100 pM-30 μM) with a lower detection limit of 6.46 pM (S/N = 3). This work using the strategy that the targets induced the variations of the electron donor shows the advantages of good sensitivity and nice selectivity. The sensor holds many advantages such as simple fabrication process, economical material expense, and consistent photocurrent signals. It also holds significant potential for environmental monitoring and serves as a practical photoelectric sensing approach for detecting Cr (VI).

Microfluidic Devices for Heavy Metal Ions Detection: A Review

The contamination of air, water and soil by heavy metal ions is one of the most serious problems plaguing the environment. These metal ions are characterized by a low biodegradability and high chemical stability and can affect humans and animals, causing severe diseases. In addition to the typical analysis methods, i.e., liquid chromatography (LC) or spectrometric methods (i.e., atomic absorption spectroscopy, AAS), there is a need for the development of inexpensive, easy-to-use, sensitive and portable devices for the detection of heavy metal ions at the point of interest. To this direction, microfluidic and lab-on-chip (LOC) devices fabricated with novel materials and scalable microfabrication methods have been proposed as a promising approach to realize such systems. This review focuses on the recent advances of such devices used for the detection of the most important toxic metal ions, namely, lead (Pb), mercury (Hg), arsenic (As), cadmium (Cd) and chromium (Cr) ions. Particular emphasis is given to the materials, the fabrication methods and the detection methods proposed for the realization of such devices in order to provide a complete overview of the existing technology advances as well as the limitations and the challenges that should be addressed in order to improve the commercial uptake of microfluidic and LOC devices in environmental monitoring applications.

Synthesis and application of fluorescent N-doped carbon dots/hydrogel composite for Cr(VI) adsorption: Uncovering the ion species transformation and fluorescent quenching mechanism

A fluorescent composite material fabricated from nitrogen-doped carbon dots with polyvinyl alcohol (PVA)/polyvinylpyrrolidone (PVP)/citric acid (CA) hydrogel was synthesized using a microwave-assisted hydrothermal method. The composite was used as a metal ion sensor and adsorbent to remove chromium (Cr(VI)) from water. The chemical structure and Cr(VI) removal performance of the fluorescent composite films were also characterized. Fluorescent quenching upon Cr(VI) adsorption showed that Cr(VI) binding was attributed to the N-doped carbon dots. The results were confirmed by several analytical techniques, including X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and X-ray absorption spectroscopy (XAS). The mechanism of Cr(VI) removal from water by the fluorescent composite film was based on the adsorption and subsequent reduction of N-doped carbon dots within the 3D porous composite film. XPS measurements showed that 53.2% Cr(III) and 46.8% Cr(VI) were present on the composite surface after Cr(VI) adsorption. Moreover, XAS revealed a change in the oxidation state of Cr(VI) to Cr(III) after adsorption and in the Cr-O bond length (1.686 Å to 2.284 Å) after reduction. The Cr(VI) adsorption capacity of the composite film was 4.90 mg g^-1 at pH 4 and fit the pseudo-second-order kinetic and Freundlich models. The results of this study could be used as a platform to further apply CDs/HD composites to remove Cr(VI) from water sources.

Quantitative detection of captopril in urine by smartphone-assisted ratiometric fluorescence sensing platform

Captopril (CP) is a widely used antihypertensive drug. In this study, a smartphone-assisted sensing platform on the basis of ratiometric fluorescent test strips was developed, which can accomplish visualization for the quantitative detection of captopril. Ratiometric fluorescent probe was constructed from carbon dots (CDs) and gold nanoclusters (Au NCs). After adding Cu²⁺ to fluorescent probe, Cu²⁺ can complex the amino and carboxyl groups on the surface of Au NCs and aggregate Au NCs, which will quench the fluorescence of Au NCs. Compared with amino and carboxyl groups, -SH in CP has a higher affinity for Cu²⁺ and can capture Cu²⁺ to restore Au NCs fluorescence. In this process, CDs remained essentially unchanged as background fluorescence. As CP concentration increased, the fluorescence color showed a distinct change from blue to purple to orange. Based on this principle, a sensing platform combining smartphone and fluorescent test strips was constructed to visualize the quantitative detection of CP by RGB values. Under optimal conditions, the wide linear range of CP detection for both fluorescence spectrometer and smartphone paper-based sensing platform was 0.25-50 μM. The limits of detection were as low as 76 nM and 101.3 nM, respectively. Furthermore, it was implemented successfully for the detection of CP in urine. The satisfactory recoveries were 96.0-103.3% and 92.0-108.0% for fluorescence spectrometer and smartphone platform, respectively. This smartphone-assisted platform provided a new approach for visual detection of CP, which showed its great potential in bioanalytical assays.

Sensitive and selective detection of chromium (VI) based on two-dimensional luminescence metal organic framework nanosheets via the mechanism integrating chemical oxidation-reduction and inner filter effect

Two-dimensional luminescence metal organic framework nanosheets (LMOF) named NH₂-CuMOFs were synthesized using Cu (II) nodes coordinated with negatively charged 2-aminoterephthalic acid (NH₂-BDC) via a bottom-up strategy, which were first used as the fluorescent probes for the detection of chromium Cr (VI). The nanosheets possess stable fluorescence with the maximum emission wavelength of 436 nm at excitation of 338 nm that can be effectively quenched by hexavalent chromium Cr (VI). The NH₂-CuMOFs nanosheets show superior advantage over the linker of NH₂-BDC for the excellent selectivity to Cr (Ⅵ) without the interferences of other metal ions. The mechanism investigation suggested that the sensitive detection of Cr (VI) was attributed to the chemical oxidation-reduction (redox) reaction and internal filtration effect (IFE) between Cr (VI) and NH₂-CuMOFs nanosheets. Based on this mechanism, the quantitation of Cr (VI) was realized in the linear range of 0.1-20 μM with a detection limit of 18 nM. Moreover, the detection of Cr (VI) in real samples was also conducted with good recovery. This work provides an optical sensing nanoplatform for heavy metal ions based on two-dimensional LMOFs via a novel mechanism integrating chemical redox reaction and IFE, which may promise broad application prospect for two-dimensional luminescence nanosheets.

Rapid synthesis of microwave-assisted zinc oxide nanorods on a paper-based analytical device for fluorometric detection of l-dopa

l-dopa is a catecholamine neurotransmitter used to treat Parkinson's disease. This paper presents a low-cost paper-based biosensor aimed at enhancing the convenience of monitoring l-dopa concentrations. ZnO nanorods (ZnO-NRs) were synthesized on papers in less than 90 min using a microwave-assisted hydrothermal method. The ZnO-NRs amplify green fluorescence signals to enhance the detection sensitivity of l-dopa, best measured at excitation/emission wavelengths of 475/537 nm. We systematically characterized the effect of reaction conditions on the corresponding fluorescence enhancements. The proposed ZnO NRs-paper biosensor presented a ∼3-fold increase in green fluorescence compared to unmodified papers. The linear range of detection for l-dopa was 25-2000 nM, with a limit of detection of 24 nM, which meets the clinical requirements for the monitoring of l-dopa in Parkinson's patients.

Carbon dots derived from Poria cocos polysaccharide as an effective “on-off” fluorescence sensor for chromium (VI) detection

Chromium is a harmful contaminant showing mutagenicity and carcinogenicity. Therefore, detection of chromium requires the development of low-cost and high-sensitivity sensors. Herein, blue-fluorescent carbon quantum dots were synthesized by one-step hydrothermal method from alkali-soluble Poria cocos polysaccharide, which is green source, cheap and easy to obtain, and has no pharmacological activity due to low water solubility. These carbon quantum dots exhibit good fluorescence stability, water solubility, anti-interference and low cytotoxicity, and can be specifically combined with the detection of Cr(VI) to form a non-fluorescent complex that causes fluorescence quenching, so they can be used as a label-free nanosensor. High-sensitivity detection of Cr(VI) was achieved through internal filtering and static quenching effects. The fluorescence quenching degree of carbon dots fluorescent probe showed a good linear relationship with Cr(VI) concentration in the range of 1–100 μM. The linear equation was F₀/F = 0.9942 + 0.01472 [Cr(VI)] (R² = 0.9922), and the detection limit can be as low as 0.25 μM (S/N = 3), which has been successfully applied to Cr(VI) detection in actual water samples herein.

•

Carbon dots was synthesized from alkaloid-soluble Poria cocos polysaccharide, which used for Cr (VI) detection.

•

High sensitivity and selectivity detection of Cr(VI) based on internal filtering effect and static quenching mechanism.

•

The method analysis speed is quick, sensitive, raw materials for convenient, inexpensive.

•

The method has been applied to the determination of Cr(VI) in actual samples with satisfactory recovery.

Design of "Turn On" fluorometric nanoprobe based on nitrogen doped graphene quantum dots modified with β-cyclodextrin and vitamin B6 cofactor for selective sensing of dopamine in human serum

Herein, a novel and rapid fluorometric nanoprobe was constructed for quantitation of dopamine (DA) in presence of biologically interfering compounds. The nanoprobe based on synthesis of yellow emissive nitrogen doped graphene quantum dots (N@GQDs) by advanced thermal driven oxidation. After that, the synthesized N@GQDs was capped with β-cyclodextrin (β-CD), followed by interaction with pyridoxal (PYL) vitamin B₆ cofactor. This interaction resulted in diminishing the yellow fluorescence of β-CD/N@GQDs, and appearance of blue emission peak at 420 nm. Upon addition of DA, the blue emission of β-CD/N@GQDs was increased after excitation at λ = 330 nm. Under optimum conditions, the nanoprobe exhibited a linear range of 0.36-400 nM with limit of detection (LOD) of 0.117 nM. In addition, the fluorescent nanoprobe shows high selectivity and can be used for detection of DA in complicated biological matrices and human serum. This strategy might provide a potential tool for clinical diagnosis and biomedical research for DA related diseases.

A minireview on doped carbon dots for photocatalytic and electrocatalytic applications

To date, carbon dots (CDs) or carbon quantum dots (CQDs), considered as alternatives to conventional fluorescent materials such as organic dyes and semiconductor quantum dots (QDs), have drawn significant attention from relevant researchers due to their superior properties, including nontoxicity, biocompatibility, low cost and facile synthesis, and high photoluminescence. In particular, doping heteroatoms with CDs can not only dramatically enhance the fluorescence but also greatly improve the electronic structure and doped CDs have been successfully applied in various technological fields. Herein, this minireview summarizes recent advances on the synthesis and optical properties of doped CDs and their promising applications for photocatalysis and electrocatalysis. Finally, some challenging issues as well as future perspectives of this exciting material are discussed.

Ultraviolet Carbon Nanodots Providing a Dual-Mode Spectral Matching Platform for Synergistic Enhancement of the Fluorescent Sensing

The sensing of chromium(VI) (Cr(VI)) is highly desired, due to its toxic and carcinogenic effects upon human health. Fluorescent probes, especially carbon nanodots (CNDs), have been widely used for Cr(VI) sensing via the inner filter effect (IFE). However, improving the sensitivity of these probes remains a difficult issue. In this work, CNDs derived from β-Lactoglobulin were applied as an ultrasensitive fluorescent probe for Cr(VI). With 260 nm excitation, the CNDs showed multi-band emission, including an ultraviolet 360 nm peak. The spectral matching of the CNDs with Cr(VI) led to synergistic suppression of both the excitation and emission light in the fluorescent sensing. As a consequence, the CNDs showed high sensitivity toward Cr(VI), the detection limit reaching as low as 20 nM. Moreover, taking advantage of the multi-emissive property of the CNDs, the synergistic effect was proven in an IFE-based sensing system, which might be extended to the design of other kinds of fluorescent probes.

Fluorescent Carbon Quantum Dots-Synthesis,Functionalization and Sensing Application in FoodAnalysis

Carbon quantum dots (CQDs) with stable physicochemical properties are one of theemerging carbon nanomaterials that have been studied in recent years. In addition to the excellentoptical properties such as photoluminescence, photobleaching resistance and light stability, thismaterial also has favorable advantages of good biocompatibility and easy functionalization, whichmake it an ideal raw material for constructing sensing equipment. In addition, CQDs can combinedwith other kinds of materials to form the nanostructured composites with unique properties, whichprovides new insights and ideas for the research of many fields. In the field of food analysis,emerging CQDs have been deeply studied in food composition analysis, detection and monitoringtrace harmful substances and made remarkable research progress. This article introduces andcompares the various methods for CQDs preparation and reviews its related sensing applicationsas a new material in food components analysis and food safety inspection in recent years. It isexpected to provide a significant guidance for the further study of CQDs in the field of foodanalysis and detection. CQDs; synthesis; fluorescent sensing; food analysis.

Landing microextraction sediment phase onto surface enhanced Raman scattering to enhance sensitivity and selectivity for chromium speciation in food and environmental samples

The current study explores the first full mode liquid microextraction technique coupled with surface-enhanced Raman spectroscopy (SERS), and has been successfully applied for chromium speciation in food and environmental matrices. Herein, chromium as chlorochromate anion [CrO3Cl]- and the cationic rhodamine 6G [RG]+ dye has been extracted in organic phase as a complex ion associate [RG+.CrO3Cl-.nS]org at pH ≤ 1.0. Afterwards, the extracted phase was deposited on the surface of the nano-flower shaped silver nanoparticles substrate and the SERS response was monitored against the reagent blank at 1505 cm-1. Substrate characterizations, reaction mechanism assignment, stoichiometry, speciation, analytical applications, selectivity and validation were performed. The analytical procedure exhibits a detection limit of 0.03 µg L-1 under the optimized experimental conditions. The accuracy of the proposed strategy was validated by inductively coupled plasma optical emission spectrometry method using student's t- and F tests at 95% confidence.

Nitrogen, phosphorus and sulfur tri-doped carbon dots are specific and sensitive fluorescent probes for determination of chromium(VI) in water samples and in living cells

A rapid, sensitive, and selective fluorometric assay is described for the determination of chromium(VI) in real waters and living cells. The method is making use of nitrogen, phosphorus, and sulfur tri-doped carbon dots (NPS-CDs) which have absorption/emission maxima at 360/505 nm/nm. Cr(VI) has an absorption maximum at 350 nm and causes an inner filter effect (IFE) on the blue fluorescence of the NPS-CDs. The NPS-CDs were hydrothermally synthesized using p-aminobenzenesulfonic acid and tetrakis(hydroxymethyl)phosphonium chloride as precursors. The NPS-CDs were characterized by transmission electron microscopy, X-ray diffraction, and several spectroscopic methods. They are biocompatible and negligibly cytotoxic when tested with HeLa cells and MCF-7 cells even after 48 h of incubation. The NPS-CDs were used as fluorescent probes for Cr(VI). The detection limit is 0.23 μM (three times standard deviation versus slope), and the linear response covers the 1 to 500 μM chromate concentration range. The NPS-CDs were applied to the determination of Cr(VI) in real waters and living cells (HeLa and MCF-7) and gave satisfying results. Graphical abstractSchematic representation of hydrothermal synthesis of nitrogen, phosphorus, and sulfur tri-doped carbon dots (NPS-CDs) for Cr(VI) detection via inner filter effect (IFE). NPS-CDs were applied to the determination of Cr(VI) in living cells (HeLa and MCF-7) with satisfying results.

A review on advances in methods for modification of paper supports for use in point-of-care testing

Paper is a widely used support for use in devices for point-of-care testing (POCT) in clinical diagnosis, food safety monitoring and environmental pollution. Paper is inexpensive, biocompatible, biodegradable and allows a sample fluid to flow by capillary force. Numerous method have been developed recently for chemical modification of papers in order to introduce different functionalities. This review (with 148 refs.) summarizes the recent progress in paper-based POCT devices. The introduction summarizes the state of the art of paper-based POCT devices and the physicochemical properties of existing unmodified materials (including cellulose, cellulose-based composites, cotton fibers, glass fibers, nitrocellulose, thread). Methods for paper modification for sample pretreatment are summarized next, with subsections on sample storage and collection, sample separation, nucleic acid extraction and sample preconcentration. Another main section covers approaches for paper modification for improving POCTs, with subsections on assays for proteins, nucleic acids, drugs, ion and organic molecules. The advantages and disadvantages of these approaches are compared. Several tables are presented that summarize the various modification techniques. A concluding section summarizes the current status, addresses challenges and gives an outlook on future perspectives of POCTs. Graphical abstract This review summarizes the progress that has been made in paper based point-of-care testing (POCT) and lateral flow assays (LFAs), quite often by using advanced nanomaterials for paper modification.