Fluorometric determination of cardiac myoglobin based on energy transfer from a pyrene-labeled aptamer to graphene oxide

Aptamer-based fluorescence biosensor for rapid detection of chloramphenicol based on pyrene excimer switch

Chloramphenicol (CAP) is widely used in treating bacteria infection in animals and humans. However, the accumulation of CAP in food and environment caused serious health risk to human. Consequently, sensitive and selective detection of CAP is of great importance in environmental monitoring and food safety. Among various analytical methods, aptamer-based biosensors exhibit great potentials for CAP detection. Here, we developed an aptamer-based biosensor for rapid fluorescence detection of CAP based on pyrene excimer switch by using a newly selected short DNA aptamer with high affinity. The aptamer was labeled with pyrene molecules at both ends. The binding of CAP to the aptamer probe caused two pyrene molecules close to each other and the formation of a pyrene excimer, which induced the increase of the fluorescence signal from the pyrene excimer. CAP detection was achieved by measuring the fluorescence signal changes of the aptamer probes with dual pyrene labels. Under optimized conditions, the developed aptamer biosensor showed a detection limit of 24.4 nmol/L for CAP. The aptamer-based fluorescence sensor could quantify CAP in diluted tap water and lake water, exhibiting potentials for the application in real sample sensing of CAP.

Target-regulated Ag2S/FeOOH heterojunction activity: a direct label-free photoelectrochemical immunosensor

Myoglobin (Mb), an important cardiac marker, plays a crucial role in diagnosing, monitoring, and evaluating the condition of patients with cardiovascular diseases. Here, we propose a label-free photoelectrochemical (PEC) sensor for the detection of Mb through target regulated the photoactivity of Ag2S/FeOOH heterojunction. The Ag2S/FeOOH nanospindles were synthesized and served as a sensing platform for the fabrication of bio-recognized process for Mb. Mb-aptamer was used as the responsive group to grasp the target Mb in a real sample due to its advantages of strong affinity, high stability, and ease of preparation. Mb-aptamer immunocomplex is formed in the presence of Mb, which hinders the interfacial electron transfer and then reduce the photocurrent. The proposed PEC aptasensor exhibited excellent analytical performance including wide linear range (1.0 pg mL-1 ~ 50 ng mL-1), low limit of detection (0.28 pg mL-1), and good selectivity and stability. This work introduces an innovative approach to PEC aptasensor, offering a promising method for precise determination of human biomarkers.

Sandwich-type electrochemical aptasensor for sensitive detection of myoglobin based on Pt@CuCo-oxide nanoparticles as a signal marker

When an acute myocardial infarction (AMI) occurs, myoglobin (Mb) is the biomarker whose concentration firstly increases, and the high sensitive detection of Mb is critical for early diagnosis of AMI. Herein, a sandwich-type electrochemical aptasensor for the sensitive detection of Mb was constructed by using Pt@Cu1.33OCo0.83O as the signal marker. On one hand, nano-flower-like Cu1.33OCo0.83O was synthesized by hydrothermal method and Pt nanoparticles (Pt NPs) were loaded on its surface. Pt@Cu1.33OCo0.83O could immobilize aptamer 2 (Apt2) successfully by the Pt-S bond. And because of the synergistic effect between Pt and bimetallic oxide, Pt@Cu1.33OCo0.83O had an excellent catalytic effect on the signal source of hydrogen peroxide (H2O2) to amplify the current signal, which enhance the sensitivity of the aptasensor. On the other hand, the screen-printed gold electrode (SPGE) was used as the sensing base, which had good conductivity and ensured the immobilization of aptamer 1 (Apt1). The quantitative detection of Mb was achieved by specific recognition between Mb and Apt1, Apt2. As a result, the constructed electrochemical aptasensor had a good linear range (1-1500 ng/mL) with a low detection limit (LOD) of 0.128 ng/mL (S/N = 3), and a high sensitivity of 29.47 μA dec-1. The aptasensor also realized the detection of Mb in human serum samples with good accuracy, and the results were consistent with the hospital's biochemical indicators, which demonstrated the potential application of the prepared sensor in the clinical detection of Mb.

Smartphone-Aided Fluorescence Detection of Cardiac Biomarker Myoglobin by a Ratiometric Fluorescent AuNCs-QDs Nanohybrids Probe with High Sensitivity

Simple and sensitive detection of cardiac biomarkers is of great significance for early diagnosis and prevention of acute myocardial infarction (AMI). Here, a ratiometric fluorescent nanohybrids probe (AuNCs-QDs) was synthesized through the coupling of bovine serum albumin-functionalized gold nanoclusters (AuNCs) with CdSe/ZnS quantum dots (QDs) to realize simple and sensitive detection of cardiac biomarker myoglobin (Mb). The AuNCs-QDs probe shows pink fluorescence under UV light, with two emission peaks at 468 nm and 630 nm belonging to QDs and AuNCs, respectively. Importantly, the presence of Mb caused fluorescence quenching of the blue-emitting QDs, thereby inhibiting the fluorescence resonance energy transfer (FRET) process between QDs and AuNCs, and reducing the fluorescence intensity ratio (F468/F630) of AuNCs-QDs probe effectively. As the concentration of Mb increases, the ratiometric fluorescent probe also exhibits a visible fluorescence color change. The detection limit was as low as 4.99 μg/mL, and the response of the probe to Mb showed a good linear relationship up to 0.52 mg/mL. Moreover, the probe has excellent specificity for Mb. Besides, the AuNCs-QDs has been applied to detect Mb of urine samples. More importantly, we also developed an AuNCs-QDs probe modified smartphone-aided paper-based strip for on-site monitoring of Mb. As far as we know, this is the first report of a smartphone-aided paper-based strip for on-site quick monitoring of Mb, which provides a useful approach for AMI biomarker monitoring and may can be extended to other medical diagnostics.

Recent trends in aptamer-based nanobiosensors for detection of vascular endothelial growth factors (VEGFs) biomarker: A review

Vascular endothelial growth factor (VEGF) is a remarkable cytokine that plays an important role in regulating vascular formation during the angiogenesis process. Therefore, real-time detection and quantification of VEGF is essential for clinical diagnosis and treatment due to its overexpression in various tumors. Among various sensing strategies, the aptamer-based sensors in combination with biological molecules improve the detection ability VEGFs. Aptamers are suitable biological recognition agents for the preparation of sensitive and reproducible aptasensors (Apt-sensors) due to their low immunogenicity, simple and straightforward chemical modification, and high resistance to denaturation. Here, a summary of the strategies for immobilization of aptamers (e.g., direct or self-assembled monolayer (SAM) attachment, etc.) on different types of electrodes was provided. Moreover, we discussed nanoparticle deposition techniques and surface modification methods used for signal amplification in the detection of VEGF. Furthermore, we are investigating various types of optical and electrochemical Apt-sensors used to improve sensor characterization in the detection of VEGF biomarkers.

Rapid sensitive fluorescence detection of cadmium (II) with pyrene excimer switching aptasensor

Heavy metal cadmium (II) contamination often occurs, causing great health risk to human due to high toxicity of cadmium (II). Rapid, sensitive and simple detection of cadmium (II) are of great importance in environmental monitoring. Taking advantage of aptamer in specific recognition, easy modification, and capability of binding-induced structure change, here we reported a simple fluorescent sensor with rapid and sensitive response for Cd²⁺ using aptamer pyrene excimer switch. The aptamer was labeled with dual pyrene molecules at two ends of the sequence. The binding of Cd²⁺ to this aptamer probe brought the pyrene labels into close proximity and enhanced formation of a pyrene excimer, which generated increased fluorescence at 485 nm. By measuring the fluorescence of pyrene excimer, we achieved detection of Cd²⁺ with this aptasensor. Under the optimum experimental conditions, the detection limit of Cd²⁺ reached nanomolar levels. This method was selective and allowed for the detection of Cd²⁺ in tap water. This fluorescence aptasensor is promising for rapid detection of Cd²⁺ in broad applications.

Progress in the Optical Sensing of Cardiac Biomarkers

Biomarkers play key roles in the diagnosis, risk assessment, treatment and supervision of cardiovascular diseases (CVD). Optical biosensors and assays are valuable analytical tools answering the need for fast and reliable measurements of biomarker levels. This review presents a survey of recent literature with a focus on the past 5 years. The data indicate continuing trends towards multiplexed, simpler, cheaper, faster and innovative sensing while newer tendencies concern minimizing the sample volume or using alternative sampling matrices such as saliva for less invasive assays. Utilizing the enzyme-mimicking activity of nanomaterials gained ground in comparison to their more traditional roles as signaling probes, immobilization supports for biomolecules and for signal amplification. The growing use of aptamers as replacements for antibodies prompted emerging applications of DNA amplification and editing techniques. Optical biosensors and assays were tested with larger sets of clinical samples and compared with the current standard methods. The ambitious goals on the horizon for CVD testing include the discovery and determination of relevant biomarkers with the help of artificial intelligence, more stable specific recognition elements for biomarkers and fast, cheap readers and disposable tests to facilitate rapid testing at home. As the field is progressing at an impressive pace, the opportunities for biosensors in the optical sensing of CVD biomarkers remain significant.

Theranostic Applications of Nanomaterials in the Field of Cardiovascular Diseases

A large percentage of people are being exposed to mortality due to cardiovascular diseases. Convention approaches have not provided satisfactory outcomes in the management of these diseases. To overcome the limitations of conventional approaches, nanomaterials like nanoparticles, nanotubes, micelles, lipid based nanocarriers, dendrimers, carbon based nano-formulations represent the new aspect of diagnosis and treatment of cardiovascular diseases. The unique inherent properties of the nanomaterials are the major reasons for their rapidly growing demand in the field of medicine. Profound knowledge in the field of nanotechnology and biomedicine is needed for the notable translation of nanomaterials into theranostic cardiovascular applications. In this review, the authors have summarized different nanomaterials which are being extensively used to diagnose and treat the diseases such as coronary heart disease, myocardial infarction, atherosclerosis, stroke and thrombosis.

The detection of chymotrypsin using peptides covalent bound to the surface of graphene oxide and gold nanoparticles

In this study, pyrene was used as a fluorescent dye for peptides.

Selective extraction of myoglobin from human serum with antibody-biomimetic magnetic nanoparticles

Myoglobin (Mb) is an ideal biochemical marker for the diagnosis of certain diseases caused by damage to heart muscle or skeletal muscle. Nevertheless, serum myoglobin levels are usually very low while the interference components in real sample are extremely abundent. Hence, it is of great clinical significance to establish an effective method for Mb targeting. To obtain desired selectivity, targeting biomolecules like antibody and aptamer are essential to 'the state of the art'. However, such biomolecules suffer from many disadvantages, such as hard to prepare, susceptible to protease degradation, and high cost. Thus, novel alternatives that can overcome these issues are highly desirable. Herein, we pioneered a template-anchored controllable surface imprinting strategy for selective extraction of Mb from human serum via combining with facile magnetic separation of magnetic nanoparticles (MNPs). Mb-imprinted MNPs, as antibody-biomimetic materials, were prepared using amino group-modified MNPs as substrates and water-soluble self-polymerizable dopamine as imprinting monomer. The optimized imprinting time was 70 min, giving an optimal performance with high practical imprinting efficiency (up to 41%), high imprinting factor (4.2), high binding affinity (K_d=(2.05 ± 0.09) × 10^-5 M), as well as excellent recognition selectivity. Moreover, compared to bare MNPs, Mb-imprinted MNPs possessed markedly better pH tolerance. Finally, the selective extraction of Mb from human serum sample by Mb-imprinted MNPs was experimentally confirmed and the recoveries of Mb in spiked serum ranged from (91.12 ± 6.81)% to (107.99 ± 7.76)%, indicating that the Mb-imprinted MNPs could be competent for the selective analysis of Mb in real bio-samples like human serum with high precision and reliability.

Immobilization Techniques for Aptamers on Gold Electrodes for the Electrochemical Detection of Proteins: A Review

The development of reliable biosensing platforms plays a key role in the detection of proteins in clinically and environmentally derived samples for diagnostics, as well as for process monitoring in biotechnological productions. For this purpose, the biosensor has to be stable and reproducible, and highly sensitive to detect potentially extremely low concentrations and prevent the nonspecific binding of interfering compounds. In this review, we present an overview of recently published (2017–2019) immobilization techniques for aptamers on gold electrodes for the electrochemical detection of proteins. These include the direct immobilization of thiolated aptamers and the utilization of short linkers, streptavidin/biotin interaction, as well as DNA nanostructures and reduced graphene oxide as immobilization platforms. Applied strategies for signal amplification and the prevention of biofouling are additionally discussed, as they play a crucial role in the design of biosensors. While a wide variety of amplification strategies are already available, future investigations should aim to establish suitable antifouling strategies that are compatible with electrochemical measurements. The focus of our review lies on the detailed discussion of the underlying principles and the presentation of utilized chemical protocols in order to provide the reader with promising ideas and profound knowledge of the subject, as well as an update on recent discoveries and achievements.