Fluorometric determination of copper(II) by using 3-aminophenylboronic acid-functionalized CdTe quantum dot probes

Facile synthesis of long-wavelength emission carbon dots for hypochlorite sensing and intracellular pH imaging

Hypochlorite (ClO-), a typical reactive oxygen species, plays an irreplaceable roles in various biological processes. In this work, long-wavelength emission carbon dots (LW-CDs) were fabricated through one-step hydrothermal method by using l-cysteine (cys) and neutral red (NR) as precursors for monitoring of hypochlorite and intracellular pH. Characterizations of as-prepared LW-CDs showed that they had excellent water solubility, high optical stability and sensitive response behavior. Fluorescence intensity of LW-CDs decayed in the presence of ClO- linearly from 10 to 162.5 μM (LOD = 1.021 μM) based on static quenching effect with ideal selectivity. Besides, LW-CDs revealed a pH responsive behavior in the pH range of 2.0 to 10.0, exhibited dual good linear relationships in the pH ranges of 4.2-5.8 and 5.8-7.4. The LW-CDs can also be utilized as imaging reagents in Hela living cells owing excellent biocompatibility and low cytotoxicity. These results demonstrated that the as-mentioned LW-CDs are expected to serve as excellent long wavelength emitting nanomaterials for fluorescence sensing and monitoring of cell fluctuations.

Fluorescence Sensing Mechanisms of Versatile Graphene Quantum Dots toward Commonly Encountered Heavy Metal Ions

Graphene quantum dots (GQDs) have received tremendous attention as fluorescent probes for detection of diverse heavy metal ions (HMIs). Nevertheless, the fluorescence sensing mechanisms of versatile GQDs with respect to different HMIs remain elusive. Herein, the fluorescence sensing behaviors and mechanisms of GQDs with amino and carboxyl groups toward commonly encountered Cr6+, Fe3+, Cu2+, Cr3+, Mn2+, Co2+, Ni2+, Zn2+, Cd2+, and Hg2+ under different pH conditions are systemically explored. The results show that the fluorescence of GQDs can be enhanced by Zn2+/Cd2+ and quenched by other HMIs at pH 5.8, while it can be enhanced by HMIs except Cr6+/Fe3+/Cu2+ at pH 2.0. Systematic studies verify that the fluorescence quenching/enhancing is mediated by the synergistic effect of the inner filter effect (IFE) and the photoinduced electron transfer (PET) or metal orbital-controlled chelation-quenched/enhanced fluorescence (CHQF/CHEF) effect. The strong and weak IFEs of Cr6+/Fe3+ and Cr3+/Cu2+, respectively, are one of the reasons for the fluorescence quenching, while other HMIs have no IFE. Moreover, the PET effect caused by the interaction of GQDs with Hg2+ at pH 5.8 and the CHQF/CHEF effect caused by the interaction of GQDs with other HMIs are also crucial for fluorescence quenching/enhancing. The findings suggest that the pH condition, the existing forms of functional groups on GQDs, and the complexation states of HMIs in aqueous systems dominate the PET and CHQF/CHEF effects. The elucidating of the fluorescence sensing mechanisms of GQDs toward different HMIs paves the way for developing versatile sensing platforms for monitoring of HMI contamination.

Development of cysteine-doped MnO2 quantum dots for spectrofluorimetric estimation of copper: applications in different matrices

Copper (Cu) plays a role in maintaining healthy nerve cells and the immune system. Osteoporosis is a high-risk factor for Cu deficiency. In the proposed research, unique green, fluorescent cysteine-doped MnO2 quantum dots (Cys@MnO2 QDs) were synthesized and assessed for the determination of Cu in different food and hair samples. The developed quantum dots were synthesized with the help of cysteine using a straightforward ultrasonic approach to create 3D fluorescent Cys@MnO2 QDs. The resulting QDs' morphological and optical characteristics were carefully characterized. By adding Cu ions, the intensity of fluorescence for the produced Cys@MnO2 QDs was found to be dramatically reduced. Additionally, the applicability of Cys@MnO2 QDs as a new luminous nanoprobe was found to be strengthened by the quenching effect grounded on the Cu-S bonding. The concentrations of Cu2+ ions were estimated within the range of 0.06 to 7.00 µg mL-1, with limit of quantitation equal to 33.33 ng mL-1 and detection limit equal to 10.97 ng mL-1. The Cys@MnO2 QD technique was applied successfully for the quantification of Cu in a variety of foods, including chicken meat, turkey, and tinned fish, as well as in human hair samples. The chance that this novel technique could be a useful tool for figuring out the amount of cysteine in bio-samples is increased by the sensing system's remarkable advantages, which include being rapid, simple, and economical.

A Novel L-Arginine Functionalized CdTe Quantum Dots Fluorescence Probe for Pyrophosphate Anion Detection

In this paper, a novel amino acid surface-functionalized semiconductor CdTe quantum dot fluorescent probe amidated by carboxyl and amide groups was synthesized to detect pyrophosphate ions (P2O74-, PPi). L-Arginine (L-Arg) was grafted onto cysteine modified CdTe quantum dots (Mea-CdTe QDs) to form a new L-Arginine-functionalized quantum dot fluorescent probe (L-Arg@Mea-CdTe). The prepared probe has good optical properties with multiple grafted functional groups on the surface. The guanidine group of the L-Arg@Mea-CdTe fluorescent probe is strongly basic and will be fully protonated under physiological conditions. The resulting hydrogen bonds bound to pyrophosphate lead to significant changes in the fluorescence of CdTe quantum dots. IR and XPS characterization were performed to confirm it. The addition of PPi induces a significant fluorescence quenching of L-Arg@Mea-CdTe in aqueous solution. The fluorescent QDs probe can also detect pyrophosphate with good sensitivity and anti-interference performance. The detection limit of the L-Arg@Mea-CdTe fluorescence probe for PPi is as low as 0.30 μM. In addition, the novel nano-fluorescent probe was successfully applied to detect PPi in water and in cell imaging.

Lanthanide ternary complex as a fluorescent probe for highly sensitive and selective detection of copper ions based on selective recognition and photoinduced electron transfer

Copper ions have a very important role in human health, industrial and agricultural production. Herein, lanthanide ternary complex of 2,6-pyridinedicarboxylic acid (DPA)-Eu³⁺-polyethyleneimine (PEI) as a fluorescent probe was thus fabricated for highly sensitive and selective detection of copper ions. PEI itself is non-fluorescent, the PEI-Eu³⁺complex is also non-fluorescent, and PEI has specific recognition to copper ions due to its higher affinity ability to copper ion than other metal ions. It was found that Cu²⁺ ions cannot quench the characteristic fluorescence of Eu³⁺ in the DPA-Eu³⁺ system, while in the DPA-Eu³⁺-PEI system, Cu²⁺ ions can greatly quench the characteristic fluorescence of Eu³⁺ due to photoinduced electron transfer (PET). The luminescent and quenching mechanism was also discussed in detail. The DPA-Eu³⁺-PEI probe not only has high sensitivity and selectivity, but also has very rapid fluorescence response and the response time is only 1 min. A good linear relationship between the fluorescence ratios of F₀/F and the concentrations of Cu²⁺ was obtained in the range of 0.02 ∼ 10.0 μM (R² = 0.998), and the limit of detection (LOD) is 8.0 nM. The probe was successfully applied for the detection of Cu²⁺ ions in the lake and river water samples, wastewater and urine samples. This work may provide a new strategy for fabricating simple and effective fluorescence probe and a promising application for the rapid and on-site detection in environmental monitoring and biological fluids.

The synthesis and efficiency investigation of a boronic acid-modified magnetic chitosan quantum dot nanocomposite in the detection of Cu2+ ions

We prepared the magnetic chitosan carbon quantum dot nanoparticles (Fe₃O₄@CQD NPs) via the hydrothermal treatment of chitosan biopolymer and then its magnetization with Fe₃O₄ nanoparticles. (4-Acetylphenyl)boronic acid compound was utilized for the modification of surface of Fe₃O₄@CQD nanoparticles via the covalent imine bond formation between NH₂ groups of chitosan quantum dot with carbonyl functional of acetyl-substituted arylboronic acid. The synthesized Fe₃O₄@CQD@AP-B(OH)₂ was characterized by FE-SEM, EDS, XRD, VSM and ICP-OES analysis and its fluorescence property was studied. This magnetic multifunctional nanoplatform sensor has shown high potential sensitivity for Cu²⁺ ions (in the range of 1.0-30.0 μM with limit of detection 0.3 μM) through interaction of cupric ions with the boronic-acid moiety.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Excellent fluorescence detection of Cu2+in water system using N-acetyl-L-cysteines modified CdS quantum dots as fluorescence probe

View of the negative influence of metal ions on natural environment and human health, fast and quantitative detection of metals ions in water systems is significant. Ultra-small grain size CdS quantum dots (QDs) modified with N-acetyl-L-cysteines (NALC) (NALC-CdS QDs) are successfully prepared via a facile hydrothermal route. Based on the changes of fluorescence intensity of NALC-CdS QDs solution after adding metal ions, the fluorescence probe made from the NALC-CdS QDs is developed to detect metal ions in water systems. Among various metal ions, the fluorescence of NALC-CdS QDs effectively quenched by the addition of Cu²⁺, the probe shows high sensitivity and selectivity for detecting Cu²⁺in other interferential metal ions coexisted system. Importantly, the fluorescence intensity of NALC-CdS QDs changes upon the concentration of Cu²⁺, the probe displays an excellent linear relationship between the fluorescence quenching rate and the concentration of Cu²⁺in ranging from 1 to 25μM. Besides, the detected limitation of the probe towards Cu²⁺as low as 0.48μM. The measurement of Cu²⁺in real water sample is also carried out using the probe. The results indicate that NALC-CdS QDs fluorescence probe may be a promising candidate for quantitative Cu²⁺detection in practical application.

Sequential colorimetric sensing of cupric and mercuric ions by regulating the etching process of triangular gold nanoplates

A triangular gold nanoplate (AuNPL)-based colorimetric assay is presented for ultrasensitive determination of cupric ions (Cu²⁺⁾ and mercuric ions (Hg²⁺) in sequence. AuNPLs were found to be etched efficiently when producing triiodide ions (I₃^-) by a redox reaction between Cu²⁺ and iodide ions (I^-), leading to a change of the shape of AuNPLs from triangular to sphere along with a color change from blue to pink. In the presence of Hg²⁺ the etching of AuNPLs was suppressed due to the consumption of I^- by the formation of HgI₂. With an increase of the concentration of the Hg²⁺ a transformation from sphere to triangular in the shape of AuNPLs occurred with a color change from pink to blue. The evolution of AuNPLs from etching to anti-etching state by sequential addition of Cu²⁺ and Hg²⁺ was accompanied with color variations and band shifts of localized surface plasmon resonance (LSPR), allowing for visual and spectroscopic determination of Cu²⁺ and Hg²⁺ successively within 15 min. In the range 0.01-1.5 μM for Cu²⁺ and 0.02-3.0 μM for Hg²⁺, the linear relationship between the band shift values and the target ions concentration was found good (R² > 0.996). The limit of detections (3S/k) was 19 nM for Cu²⁺ and 9 nM for Hg²⁺, respectively. The lowest visual estimation concentration was 80 nM for both Cu²⁺ and Hg²⁺ through the distinguishable color changes. This system exhibited desirable selectivity for Cu²⁺ and Hg²⁺ over other common ions tested. The method has been successfully applied to sequential determination of Cu²⁺ and Hg²⁺ in real water and food samples. Graphical abstract Scheme 1 Schematic illustration for sequential detection of Cu²⁺ and Hg²⁺ based on etching of AuNPLs.

Polystyrene@poly(ar-vinylbenzyl)trimethylammonium-co-acrylic acid core/shell pH-responsive nanoparticles for active targeting and imaging of cancer cell based on aggregation induced emission

Doubly charged pH-responsive core/shell hydrogel nanoparticles with green fluorescence were prepared and were shown to be viable bioprobes for active targeting tumor tissue and imaging of cancer cells. Via emulsionfree copolymerization hydrogel nanoparticles as VANPs were prepared, the core of which was polystyrene (Ps) and the shell was comprised of strongly positive electrolyte (ar-vinylbenzyl)trimethylammonium (VBTAC) with weak negative electrolyte acrylic acid (AA). Through conventional amidation, the shell was conjugated with cell-specific folic acid (FA), denoted as VANPs-FA. Then, negatively charged sulfonated 9,10-distyrylanthracene derivatives (SDSA) based on aggregation induced emission (AIE), was binding tightly to positively charged VBTAC of VANPs-FA shell. The prepared double charged fluorescent core/shell hydrogel nanoparticles abbreviated as VANPs-FS, showed excitation/emission wavelengths at ~420/528 nm. Dynamic light scattering (DLS) measurements were performed to determine the size and surficial zeta potential of VANPs-FS. Under proper ratio of VBTAC to AA, the VANPs-FS was stable (~ 64.63 nm, -20.2 mV) at high pH (> 7), started to aggregate (~ 683.0 nm, -3.2 mV) at pH around 6, and can redispers at low pH (< 5). The MTT analysis proved that VANPs-FS had good biocompatibility and low cytotoxicity. The targeting effectiveness of VANPs-FS was confirmed by confocal laser scanning microscopy (CLSM). Graphical abstract Detailed synthetic route of VANPs-FS (top) and schematic cancer tumor-target aggregation of pH-sensitive VANPs-FS with enhanced retention and rapid cancer cell imaging (bottom).

A fluorometric optical fiber nanoprobe for copper(II) by using AgInZnS quantum dots

An optical fiber nanoprobe is presented for fluorometric determination of copper(II). The method based on the use of water-dispersible AgInZnS quantum dots (QDs) deposited at the end of an optical fiber in a poly(vinyl alcohol) matrix. The fluorescnece of the QDs, best measured at excitation/emisssion wavelengths of 365/570 nm, is quenched by Cu(II) due to both static and electron transfer from the QDs to Cu(II). This is experimentally confirmed by photoluminescence and UV-vis absorption spectra, and measurement of luminescence lifetimes. The probe is highly selective and possesses a linear detection range that extends from 2.5 to 800 nM. Graphical abstractSchematic representation of an optical fiber nanoprobe based on hydrophilic AgInZnS quantum dots for fluorometric determination of copper(II). The fluorescence is quenched by Cu(II) due to static quenching and dynamic quenching. It has a detection range of 2.5-800 nM.