Fluorometric microplate-based dimethoate assay using CdSe/ZnS quantum dots coated with a molecularly imprinted polymer

ZnS:Mn Quantum Dots Coated with a Silica Molecularly Imprinted Polymer for Trace Teflubenzuron Detection in Vegetable Samples

A novel nanocomposite fluorescent probe consisting of quantum dots and a silica molecularly imprinted polymer (MIPs-capped ZnS:Mn QDs) was synthesized and applied for the rapid detection of teflubenzuron (TBZ) based on the fluorescence quenching of a composite probe via TBZ. The fluorescence quenching efficiency of MIP@SiO2@ZnS:Mn QDs displayed a linear relationship over the concentration range of 0-26.24 μmol/L with a correlation coefficient of 0.9857 and the limit of detection was 2.4 μg/L. The selectivity test showed that the nanocomposite had good selectively rebind TBZ with higher imprinting factor of 3.06 compared with four structurally similar compounds. In addition, the probe was successfully applied to the detection of TBZ in vegetable samples with a recovery of 90.3~97.1% and with a relative standard deviation below 3.2%. This developed method has the advantages of simple preparation, fast response and low toxicity for trace TBZ detection.

Advances on chalcogenide quantum dots-based sensors for environmental pollutants monitoring

Water contamination represents a significant ecological impact with global consequences, contributing to water scarcity worldwide. The presence of several pollutants, including heavy metals, pharmaceuticals, pesticides, and pathogens, in water resources underscores a pressing global concern, prompting the European Union (EU) to establish a Water Watch List to monitor the level of these substances. Nowadays, the standard methods used to detect and quantify these contaminants are mainly liquid or gas chromatography coupled with mass spectrometry (LC/GC-MS). While these methodologies offer precision and accuracy, they require expensive equipment and experienced technicians, and cannot be used on the field. In this context, chalcogenide quantum dots (QDs)-based sensors have emerged as promising, user-friendly, practical, and portable tools for environmental monitoring. QDs are semiconductor nanocrystals that possess excellent properties, and have demonstrated versatility across various sensor types, such as fluorescent, electrochemical, plasmonic, and colorimetric ones. This review summarizes recent advances (2019-2023) in the use of chalcogenide QDs for environmental sensing, highlighting the development of sensors capable of detect efficiently heavy metals, anions, pharmaceuticals, pesticides, endocrine disrupting compounds, organic dyes, toxic gases, nitroaromatics, and pathogens.

Highly Sensitive Fluorescence Detection of Three Organophosphorus Pesticides Based on Highly Bright DNA-Templated Silver Nanoclusters

It is still challenging to achieve simultaneous and sensitive detection of multiple organophosphorus pesticides (OPs). Herein, we optimized the ssDNA templates for the synthesis of silver nanoclusters (Ag NCs). For the first time, we found that the fluorescence intensity of T base-extended DNA-templated Ag NCs was over three times higher than the original C-riched DNA-templated Ag NCs. Moreover, a "turn-off" fluorescence sensor based on the brightest DNA-Ag NCs was constructed for the sensitive detection of dimethoate, ethion and phorate. Under strong alkaline conditions, the P-S bonds in three pesticides were broken, and the corresponding hydrolysates were obtained. The sulfhydryl groups in the hydrolyzed products formed Ag-S bonds with the silver atoms on the surface of Ag NCs, which resulted in the aggregation of Ag NCs, following the fluorescence quenching. The fluorescence sensor showed that the linear ranges were 0.1-4 ng/mL for dimethoate with a limit of detection (LOD) of 0.05 ng/mL, 0.3-2 µg/mL for ethion with a LOD of 30 ng/mL, and 0.03-0.25 µg/mL for phorate with a LOD of 3 ng/mL. Moreover, the developed method was successfully applied to the detection of dimethoate, ethion and phorate in lake water samples, indicating a potential application in OP detection.

A universal design of turn-on fluorescent aptasensor based on luminescent MOFs: Application for the detection of bisphenol A in water, milk and chicken samples

A universal design of turn-on fluorescent aptasensor based on aptamer functionalized gold nanoparticles (AuNPs) and luminescent metal-organic frameworks (LMOFs) complex (AuNPs-Apt/NH₂-MIL-125(Ti)) was realized for bisphenol A (BPA) detection. LMOF NH₂-MIL-125(Ti) was prepared using facial hydrothermal method. BPA aptamer functionalized AuNPs were prepared and adsorbed on the surface of NH₂-MIL-125(Ti) to obtain platform of the fluorescent aptasensor. The fabrication process, sensing performance and applicability of the proposed aptasensor were characterized and investigated carefully. Linear detection range of the constructed aptasensor was from 1 × 10^-9 mol L^-1 to 1 × 10^-4 mol L^-1 with good selectivity, repeatability, stability and reproducibility under optimal experimental conditions. Meanwhile, the fluorescent aptasensor was successfully utilized for BPA detection in real samples with the recoveries of 95.80%-103.12%. The proposed aptasensor based on AuNPs-Apt/NH₂-MIL-125(Ti) holds significant potential for BPA detection in environmental and food samples, promoting the construction and application of LMOFs-based aptasensor.

A ratiometric electrochemical biosensor via alkaline phosphatase mediated dissolution of nano-MnO2 and Ru(III) redox recycling for the determination of dimethoate

A sensitive and ratiometric electrochemical biosensor was developed for the determination of dimethoate via alkaline phosphatase (ALP) mediated dissolution of nano-MnO₂ and [Ru(NH₃)₆]³⁺(Ru(III)) redox recycling. The electroactive probe Ru(III) was adsorbed on the nano-MnO₂ with the high specific surface area through electrostatic interaction to form the MnO₂-Ru(III) nanocomposite, which was then fixed on the surface of the glassy carbon electrode. When the dimethoate inhibited the catalytic activity of ALP in a homogeneous system, the hydrolysate L-ascorbic acid (AA) produced by ALP hydrolysis of L-ascorbic acid-trisodium 2-phosphate (AAP) decreased. The solution was then incubated with a glassy carbon electrode modified by MnO₂-Ru(III). At this time, only a small amount of MnO₂-Ru(III) was decomposed and Ru(III) was rapidly electroreduced to Ru(II) on the surface of the electrode. The in-situ produced Ru(II) was chemically oxidized back to Ru(III) by Fe(III). The redox recycling of Ru(III) was completed and the Ru(III) reduction current signal was amplified. The process consumed part of Fe(III) to reduce the reduction current signal of Fe(III), and the ratio of the two reduction currents (I_Ru(III)/I_Fe(III)) increased significantly. The I_Ru(III)/I_Fe(III) value increased with the increase of dimethoate concentration in the linear range of 0.01-300 ng mL^-1, and the detection limit was 6.3 pg mL^-1. It has been successfully applied to the determination of dimethoate in oilseed rape and lettuce with a satisfactory result.

Advances and Challenges of Fluorescent Nanomaterials for Synthesis and Biomedical Applications

With the rapid development of nanotechnology, new types of fluorescent nanomaterials (FNMs) have been springing up in the past two decades. The nanometer scale endows FNMs with unique optical properties which play a critical role in their applications in bioimaging and fluorescence-dependent detections. However, since low selectivity as well as low photoluminescence efficiency of fluorescent nanomaterials hinders their applications in imaging and detection to some extent, scientists are still in search of synthesizing new FNMs with better properties. In this review, a variety of fluorescent nanoparticles are summarized including semiconductor quantum dots, carbon dots, carbon nanoparticles, carbon nanotubes, graphene-based nanomaterials, noble metal nanoparticles, silica nanoparticles, phosphors and organic frameworks. We highlight the recent advances of the latest developments in the synthesis of FNMs and their applications in the biomedical field in recent years. Furthermore, the main theories, methods, and limitations of the synthesis and applications of FNMs have been reviewed and discussed. In addition, challenges in synthesis and biomedical applications are systematically summarized as well. The future directions and perspectives of FNMs in clinical applications are also presented.

Multivariate Assessment of Procedures for Molecularly Imprinted Polymer Synthesis for Pesticides Determination in Environmental and Agricultural Samples

In the case of quantitative and qualitative analysis of pesticides in environmental and food samples, it is required to perform a sample pre-treatment process. It allows to minimalize the impact of interferences on the final results, as well as increase the recovery rate. Nowadays, apart from routinely employed sample preparation techniques such as solid-phase extraction (SPE) or solid-phase microextraction (SPME), the application of molecularly imprinted polymers (MIPs) is gaining greater popularity. It is mainly related to their physicochemical properties, sorption capacity and selectivity, thermo-mechanical resistance, as well as a wide range of polymerization techniques allowing to obtain the desired type of sorption materials, adequate to a specific type of pesticide. This paper targets to summarize the most popular and innovative strategies since 2010, associated with the MIPs synthesis and analytical procedures for pesticides determination in environmental and food samples. Application of multi-criteria decision analysis (MCDA) allows for visualization of the most beneficial analytical procedures in case of changing the priority of each step of analysis (MIPs synthesis, sample preparation process—pesticides extraction, chromatographic analysis) bearing in mind metrological and environmental issues.

The Recent Advances of Fluorescent Sensors Based on Molecularly Imprinted Fluorescent Nanoparticles for Pharmaceutical Analysis

Fluorescent nanoparticles have good chemical stability and photostability, controllable optical properties and larger stokes shift. In light of their designability and functionability, the fluorescent nanoparticles are widely used as the fluorescent probes for diverse applications. To enhance the sensitivity and selectivity, the combination of the fluorescent nanoparticles with the molecularly imprinted polymer, i.e. molecularly imprinted fluorescent nanoparticles (MIFN), was an effective way. The sensor based on MIFN (the MIFN sensor) could be more compatible with the complex sample matrix, which was especially widely adopted in medical and biological analysis. In this mini-review, the construction method, detective mechanism and types of MIFN sensors are elaborated. The current applications of MIFN sensors in pharmaceutical analysis, including pesticides/herbicide, veterinary drugs/drugs residues and human related proteins, are highlighted based on the literature in the recent three years. Finally, the research prospect and development trend of the MIFN sensor are forecasted.

Chiral drug fluorometry based on a calix[6]arene/molecularly imprinted polymer double recognition element grafted on nano-C-dots/Ir/Au

A luminescent double recognition nanoprobe is described as a new strategy for the selective determination of chiral molecules. C-dots/Ir/Au fluorescent nanoparticles, synthesised under hydrothermal conditions, are used as a high-performance probe in combination with a molecularly imprinted polymer (MIP) and calix[6]arene as a double recognition element. Thiolated calix[6]arene is grafted on C-dots/Ir/Au as the first recognition element, which then forms a host-guest complex with the target molecule levodopa (L-DOPA). Subsequently, an MIP is prepared on the C-dots/Ir/Au (MIP/C-dots/Ir/Au) by chemical polymerisation. After the removal of L-DOPA, double recognition imprinting cavities are formed. The fluorescence intensity at 478 nm of the nanoprobe is effectively quenched by adsorption of L-DOPA on MIP/C-dots/Ir/Au, which provides a method for L-DOPA determination. Owing to the double recognition strategy, this method has excellent selectivity which can effectively avoid interference from enantiomer D-DOPA, and a imprinting factor of 7.1 is obtained for L-DOPA. This accurate and reliable method, with a wide linear range (5 × 10^-10 to 1.2 × 10^-7 mol L^-1) and a low limit of detection (1.45 × 10^-10 mol L^-1), was successfully applied to the determination of L-DOPA in real samples, giving standard recoveries of 89.7-110.0%. Thus, the proposed sensing method provides a viable approach for the determination of a single enantiomer. Graphical abstract Schematic presentation of the MIP/C-dots/Ir/Au for L-DOPA detection. A fluorescence double chiral recognition nanoprobe is prepared of C-dots/Ir/Au nanoparticles as signal probe, and a molecularly imprinted polymer (MIP) and calix[6]arene as a double recognition element. Owing to the double recognition strategy, this method has strong specificity and can effectively avoid interference from enantiomers and racemates.