Cross-linkage urease nanoparticles: a high-efficiency signal-generation tag for portable pH meter-based electrochemical immunoassay of lipocalin-2 protein diagnostics

Portable pH meter-based competitive immunoassay of E-selectin using urease-encapsulated metal-organic frameworks

E-selectin (CD62E) is an adhesion molecule expressed on the surface of endothelial cells (ECs) and its level increases significantly upon the stimulation of ECs by inflammatory factors. Quantitative analysis of CD62E is of great importance to early diagnosis and treatment of vascular diseases and hypertension. A new method for the determination of CD62E was developed using a portable pH meter in this work. Two nanocomposites, urease-encapsulated and CD62E antibody-linked zeolitic imidazolate framework-8 (U@ZIF-8-Ab) and CD62E protein-coated Fe3O4 magnetic beads (MB-CD62E), were prepared successfully. MOF shells of U@ZIF-8-Ab provided an effective protection against inactivation for urease. The reaction product of two nanocomposites, which was collected via magnetic separation, catalyzed the hydrolysis of urea and led to the increase in pH of the substrate solution. CD62E could competitively react with U@ZIF-8-Ab, inhibiting the binding of two nanocompoaites. Due to the reduction of urease in the magnetically separated product, the hydrolysis of urea was limited and the pH increasing extent declined. The pH difference was found to be linearly related to the logarithm of the CD62E concentration from 0.02 to 500 ng mL-1 with a detection limit of 9.28 pg mL-1. The developed method displayed some advantages, such as good selectivity, reproducibility and stability, low-dose reagents, and simple measurement procedure. This work provides a valuable sample for immunoassay and biosensing using enzyme-encapsulated metal-organic frameworks and portable pH meter as signal readout.

Microbial community formation during dietary exposure to Fe3O4-urease nanoconjugates in silkworm (Bombyx mori): Principal fungi groups facilitate functional flux

The gut microbiota of the silkworm (Bombyx mori) is essential for metabolic processes, including digestion and immunity. Nonetheless, the role of specific gut fungi in optimizing nutrient recycling influenced by infiltrated biomaterials remains inadequately elucidated. This study investigates the potential mechanisms through which gut fungi affect the dynamics of nutrient absorption in silkworms. For this purpose, 5th instar silkworms were exposed to Fe3O4-urease nanoconjugates for 168 h following the utilization of high-throughput microbiome sequencing to identify shifts in principal fungal groups. The conditional fungi groups Mucoromycota and Basidiomycota significantly increased from 10.28 % to 47.16 % and 0.53 % to 2.63 % respectively (p < 0.05), while Ascomycota decreased from 86.57 % to 52.29 %, having no negative impact on the growth and sustainability of the host insect. Functional analysis using FunGuild showed enriched trophic nodes including pathotrophs, saprotrophs and symbiotrophs while functions of DEGs demonstrated an increased metabolic capacity associated with iron and heme binding, and lipase activity. This reveals significant restructuring of the gut fungi microbiota with specific fungal taxa exhibiting enhanced abundance and diversity correlated with the presence of Fe3O4-urease nanoconjugates, serving as a potential for engineered nanomaterials to promote the sustainability and development of sericulture.

Technologies for Frugal and Sensitive Point-of-Care Immunoassays

Immunoassays are a powerful tool for sensitive and quantitative analysis of a wide range of biomolecular analytes in the clinic and in research laboratories. However, enzyme-linked immunosorbent assay (ELISA)-the gold-standard assay-requires significant user intervention, time, and clinical resources, making its deployment at the point-of-care (POC) impractical. Researchers have made great strides toward democratizing access to clinical quality immunoassays at the POC and at an affordable price. In this review, we first summarize the commercially available options that offer high performance, albeit at high cost. Next, we describe strategies for the development of frugal POC assays that repurpose consumer electronics and smartphones for the quantitative detection of analytes. Finally, we discuss innovative assay formats that enable highly sensitive analysis in the field with simple instrumentation.

Biomimetic -mineralized multifunctional nanoflowers for anodic-stripping voltammetric immunoassay of rehabilitation-related proteins

C-reactive proteins (CRPs; an acute-phase protein) in patients with initial acute cerebral infarction neurological rehabilitation prediction have a significant correlation. In this work, a simple and sensitive anodic-stripping voltammetric (ASV) immunosensing system was innovatively designed for the quantitative screening of target CRPs using biomimetic-mineralized bifunctional antibody-Cu₃(PO₄)₂ nanoflowers as molecular tags. In this system, a monoclonal anti-CRP antibody-anchored microtiter plate was utilized to specifically capture target CRPs from the sample. For detection, a sandwiched immunoreaction mode was employed with the antibody-Cu₃(PO₄)₂ nanoflowers in the presence of analytes. Subsequent ASV measurement of copper ions (Cu²⁺) released under acidic conditions from the bifunctional nanoflowers was conducted at an in situ prepared mercury film electrode. The introduction of hybrid nanoflowers greatly increased the loading amount of copper ions on the molecular tag, thereby amplifying the detectable signal of electrochemical immunoassay. Meanwhile, factors influencing the analytical properties of the electrochemical immunoassay were investigated in detail. By combining the high-efficiency nanohybrids with signal amplification, the dynamic concentration range of electrochemical immunoassay spanned from 0.01 ng mL^-1 to 100 ng mL^-1 toward the target CRP. The limit of detection was calculated to be 0.0079 ng mL^-1 at 3S_blank criterion. Intra- and interassay imprecisions (relative standard deviations: RSDs) were less than or equal to 6.72%. Good anti-interference ability, long-term storage stability, and acceptable accuracy for the evaluation of human serum specimens were observed during a series of procedures to determine the target protein. In addition, the bifunctional nanoflower-based immunosensing system offers promise for the simple, cost-effective analysis of disease-related proteins.

Recent advances in enzyme-enhanced immunosensors

Among the products for rapid detection in different fields, enzyme-based immunosensors have received considerable attention. Recently, great efforts have been devoted to enhancing the output signals of enzymes through different strategies that can significantly improve the sensitivity of enzyme-based immunosensors for the need of practical applications. In this manuscript, the significance of enzyme-based signal transduction patterns in immunoassay and the central role of enzymes in achieving precise control of reaction systems are systematically described. In view of the rapid development of this field, we classify these strategies based on the combination of immune recognition and enzyme amplification into three categories, namely enzyme-based enhancement strategies, combination of the catalytic amplification of enzymes with other signal amplification methods, and substrate-based enhancement strategies. The current focus and future direction of enzyme-based immunoassays are also discussed. This article is not exhaustive, but focuses on the latest advances in different signal generation methods based on enzyme-initiated catalytic reactions and their applications in the detection field, which could provide an accessible introduction of enzyme-based immunosensors for the community with a view to further improving its application efficiency.

Sensitive pH-responsive point-of-care electrochemical immunoassay for influenza A (H1N1) virus using glucose oxidase-functionalized Ti3C2-MXene nanosheets

Influenza A (H1N1) virus is a serious health threat and potential leading cause of death around the world during the processes of immunity and inflammation. Herein a sensitive pH-responsive point-of-care (POC) electrochemical immunoassay was designed for the quantitative monitoring of H1N1 influenza virus using glucose oxidase (GOx) and secondary antibody-functionalized Ti₃C₂-MXene nanosheets. The assay was carried out on the basis of the sandwich-type immunoreaction in the capture antibody-coated microplate. Two-dimensional (2D) Ti₃C₂-MXene nanosheets with a large surface area could efficiently enhance the loading amount of GOx molecules, thereby resulting in the signal amplification. Accompanying the formed immunocomplexes, labeled GOx molecules catalyzed glucose into gluconic acid and hydrogen peroxide. The generated gluconic acid caused a pH change of the detection solution, which was quantitatively determined on a handheld pH meter. Two labeling strategies with and without Ti₃C₂-MXene nanosheets were investigated to determine the target H1N1 influenza virus, and improved properties were acquired with the Ti₃C₂-MXene-labeled system. Under optimum conditions, the Ti₃C₂-MXene-based immunoassay gave good dynamic responses toward the target H1N1 influenza virus from 0.01 μg mL^-1 to 100 μg mL^-1 with a detection limit of 1.3 ng mL^-1. Good reproducibility, high specificity, and acceptable stability were also achieved in the analysis of the target H1N1 influenza virus. Significantly, measurements of the H1N1 influenza virus from clinical human samples were demonstrated to further confirm the method reliability and accuracy of the Ti₃C₂-MXene-based electrochemical immunoassay. Importantly, such a pH-meter-based immunoassay can be suitable for use in point-of-care applications and opens new opportunities for diagnostics.

Handheld pH meter-assisted immunoassay for C-reactive protein using glucose oxidase-conjugated dendrimer loaded with platinum nanozymes

A simple and feasible pH meter-based immunoassay is reported for detection of C-reactive protein (CRP) using glucose oxidase (GOD)-conjugated dendrimer loaded with platinum nanozyme. Initially, platinum nanozymes were loaded into the dendrimers through an in situ synthetic method. Then, GOD and monoclonal anti-CRP antibody with a high molar ratio were covalently conjugated onto carboxylated dendrimers via typical carbodiimide coupling. The immunoreaction was carried out with a competitive mode in a CRP-coated microplate. Along with formation of immunocomplex, the added glucose was oxidized into gluconic acid and hydrogen peroxide by GOD, and the latter was further decomposed by platinum nanozyme, thus accelerating chemical reaction in the positive direction. The produced gluconic acid changed the pH of detection solution, which was determined using a handheld pH meter. Under optimum conditions, the pH meter-based immunoassay gave a good signal toward target CRP from 0.01 to 100 ng mL-1. The limit of detection was 5.9 pg mL-1. An intermediate precision ≤ 11.2% was acquired with batch-to-batch identification. No nonspecific adsorption was observed during a series of procedures to detect target CRP, and the cross-reaction against other biomarkers was very low. Importantly, our system gave well-matched results for analysis of human serum samples relative to a referenced ELISA kit.Graphical abstract.