Cu2+-modified hollow carbon nanospheres: an unusual nanozyme with enhanced peroxidase-like activity

Evaluation of peroxidase mimicking behaviour of V2O5 nanozymes with various morphologies and its application as glucose sensor via cascade mechanism in human serum samples

A simple spectrophotometric method is presented for quantifying glucose and H2O2 using p-aminophenol sulfate-(PAP) & N-(1-Naphthyl) ethylenediamine dihydrochloride-(NEDA) as novel chromogenic reagents with different morphological V2O5 nanoparticles (NPs) as peroxidase mimicking nanozyme. For glucose, the method was linear in the range of 0.0289 and 0.925 mM for HRP and NPs. The substrate and nanozymes interaction was established using Km values, which were satisfactory. Recovery studies were performed with glucose and found between 83.98 % and 99.08 % for NPs and 88.48 to 99.35 for HRP. LOD range of 0.0194-0.0351 mM and LOQ range of 0.0588-0.1064 mM was observed with NPs, whereas for HRP, LOD was 0.02 and LOQ was 0.0607 mM. Maltose, sucrose, fructose, mannose, and galactose, considered potential interferants in glucose assay methods, provided negligible interference with the proposed method. Based on XRD data, the average crystalline size of the NPs was calculated using Scherrer's equation and Williamson-Hall plot and ranged between 29.14 and 45.42 nm, 32.5 and 45.7 nm, respectively. SEM and TEM images confirm the morphology of V2O5 Nps were vanadium nanosheets (VNShs), nanoflowers (VNFws), and nanospheres (VNSps). DLS data revealed the Zeta potential of NPs in the range -4.5mv to 4.6mv. XPS confirms the NPs are in the V2O5 state.

Designing Fe8-N2 Catalytic Sites of Nitrogen-Doped Iron-Based Nanoparticles with Oxidase-Like Activity: Characterization, Calculation and Application

Designing metal nanoparticles with oxidase-mimicking capabilities has garnered significant attention due to their promising attributes. However, understanding the intricate catalytic mechanisms underlying these nanoparticles poses a formidable challenge. In this study, a straightforward pyrolysis procedure was employed to synthesize nitrogen-doped iron-based nanoparticles (Fe NPs-N@C) with Fe8-N2 serving as active sites. The confirmation of these sites was thoroughly confirmed through density functional theory (DFT) calculations complemented by experimental validation. The resulting Fe NPs-N@C nanoparticles, averaging 5.45 nm in size, exhibited excellent oxidase-mimicking activity, with vmax=1.11×10-7 M s-1and km=1.67 mM, employing 3,3',5,5'-tetramethylbenzidine as a substrate. The oxidation pathway and catalytic mechanism of Fe NPs-N@C involved 1O2⋅ radicals, validated through electron paramagnetic resonance analysis and DFT calculations. Furthermore, Fe NPs-N@C/TMB system was devised for ascorbic acid and nitrite quantitative detection. This method demonstrated the capability to detect ascorbic acid within concentrations ranging from 1 to 55 μM, with a limit of detection (LOD) of 0.81 μM, and nitrite within concentrations from 1 to 160 μM, with a LOD value of 0.45 μM. These findings offer a comprehensive understanding of the catalytic mechanisms of Fe NPs-N@C nanoparticles at the atomic level, along with its potential for colorimetric sensor in future.

Fe-codoped carbon dots serving as a peroxidase mimic to generate in situ hydrogen peroxide for the visual detection of glucose

Nanozyme technology has gained significant regard and been successfully implemented in various applications including chemical sensing, bio-medicine, and environmental monitoring. Fe-CDs were synthesized and characterized well in this study. As compared to HRP (3.7 mM), the Fe-CDs exhibited a higher affinity towards H2O2 (0.2 mM) using the steady-state kinetic assay and stronger catalytic capability by changing the color of TMB to the blue color of the oxidized state, oxTMB. Additionally, an efficient peroxidase mimic, Fe-CDs/GOx, based on the hybrid cascade system to produce in situ H2O2 for the visual detection of glucose (color change: colorless to blue, and then to green), has been developed in detail, with limits of detection (LODs) for H2O2 and glucose of 0.33 μM and 1.17 μM, respectively. The changes further demonstrate a linear relationship between absorbance and H2O2 concentration, ranging from 10 to 60 μM, and for glucose (1 to 60 μM). To assess the accuracy and detection capability of the Fe-CDs/GOx system, we evaluated a real human serum sample obtained from adult males in a local hospital. In conclusion, Fe-CDs serving as a peroxidase mimic have the potential for various applications in the fields of biomedicine and nanozymes.

Piezoelectric Effect Modulates Nanozyme Activity: Underlying Mechanism and Practical Application

Nanozyme activity relies on surface electron transfer processes. Notably, the piezoelectric effect plays a vital role in influencing nanozyme activity by generating positive and negative charges on piezoelectric materials' surfaces. This article comprehensively reviews the potential mechanisms and practical applications of regulating nanozyme activity through the piezoelectric effect. The article first elucidates how the piezoelectric effect enables nanozymes to exhibit catalytic activity. It is highlighted that the positive and negative charges produced by this effect directly participate in redox reactions, leading to the conversion of materials from an inactive to an active state. Moreover, the piezoelectric field generated can enhance nanozyme activity by accelerating electron transfer rates or reducing binding energy between nanozymes and substrates. Practical applications of piezoelectric nanozymes are explored in the subsequent section, including water pollutant degradation, bacterial disinfection, biological detection, and tumor therapy, which demonstrate the versatile potentials of the piezoelectric effect in nanozyme applications. The review concludes by emphasizing the need for further research into the catalytic mechanisms of piezoelectric nanozymes, suggesting expanding the scope of catalytic types and exploring new application areas. Furthermore, the promising direction of synergistic catalytic therapy is discussed as an inspiring avenue for future research.

Metal-organic framework (MOF)-derived flower-like Ni-MOF@NiV-layered double hydroxides as peroxidase mimetics for colorimetric detection of hydroquinone

BACKGROUND

Nanozymes are one of the ideal substitutes for natural enzymes because of their excellent chemical stability and simple preparation methods. However, due to the limited catalytic ability of most reported nanozymes, constructing nanomaterials with low cost and high activity is gradually becoming an exploration focus in the field of nanozymes. Heteroatom doping of metal-organic frameworks is one of potential approaches to design nanozymes with high catalytic performance. Due to their multiple valence states properties, V-doped metal-organic framework (MOF)-derived LDH is expected to be a good enzyme-like catalyst. To our knowledge, the V-doped MOF-derived LDH as nanozyme is not explored before.

RESULTS

We report the in-situ synthesis of NiV-layered double hydroxides (LDHs) on nickel-based MOF, i.e. Ni-MOF@NiV-LDHs. The MOF surface is covered by 2D nanosheets. This unique structural design increases the specific surface area of the material, enables more exposure of catalytic active sites to participate in reactions and accelerates the electron transfer rate. The Ni-MOF@NiV-LDHs have high peroxidase-like activity able to catalyze TMB oxidation by H2O2 via the generation of •OH and O2•-. Relative to Ni-MOF, the Ni-MOF@NiV-LDHs shows 47-fold peroxidase-like activity rise. It had good affinity to TMB and H2O2, with the Michaelis-Menten constants of 0.12 mM and 0.007 mM, respectively. The hydroquinone (HQ) consumed the reactive oxygen species generated in the TMB + H2O2+Ni-MOF@NiV-LDHs system to inhibit the TMB oxidation. On this basis, a sensitive and rapid assay for determining HQ was developed, with a linear range of 0.50-70 μM and a LOD of 0.37 μM.

SIGNIFICANCE

This work provided some clues for the further development of novel nanozymes with high catalytic performance via a strategy of heteroatom doping. And the constructed colorimetric analysis method was successfully utilized for the determination of HQ in actual waters, which has the potential for practical application in the analysis of environmental pollutants.

Research Progress in Iron-Based Nanozymes: Catalytic Mechanisms, Classification, and Biomedical Applications

Natural enzymes are crucial in biological systems and widely used in biology and medicine, but their disadvantages, such as insufficient stability and high-cost, have limited their wide application. Since Fe₃O₄ nanoparticles were found to show peroxidase-like activity, researchers have designed and developed a growing number of nanozymes that mimic the activity of natural enzymes. Nanozymes can compensate for the defects of natural enzymes and show higher stability with lower cost. Iron, a nontoxic and low-cost transition metal, has been used to synthesize a variety of iron-based nanozymes with unique structural and physicochemical properties to obtain different enzymes mimicking catalytic properties. In this perspective, catalytic mechanisms, activity modulation, and their recent research progress in sensing, tumor therapy, and antibacterial and anti-inflammatory applications are systematically presented. The challenges and perspectives on the development of iron-based nanozymes are also analyzed and discussed.

Nanozymes and nanoflower: Physiochemical properties, mechanism and biomedical applications

Natural enzymes possess several drawbacks which limits their application in industries, wastewater remediation and biomedical field. Therefore, in recent years researchers have developed enzyme mimicking nanomaterials and enzymatic hybrid nanoflower which are alternatives of enzyme. Nanozymes and organic inorganic hybrid nanoflower have been developed which mimics natural enzymes functionalities such as diverse enzyme mimicking activities, enhanced catalytic activities, low cost, ease of preparation, stability and biocompatibility. Nanozymes include metal and metal oxide nanoparticles mimicking oxidases, peroxidases, superoxide dismutase and catalases while enzymatic and non-enzymatic biomolecules were used for preparing hybrid nanoflower. In this review nanozymes and hybrid nanoflower have been compared in terms of physiochemical properties, common synthetic routes, mechanism of action, modification, green synthesis and application in the field of disease diagnosis, imaging, environmental remediation and disease treatment. We also address the current challenges facing nanozyme and hybrid nanoflower research and the possible way to fulfil their potential in future.

Application of Nanozymes in Environmental Monitoring, Management, and Protection

Nanozymes are nanomaterials with enzyme-like activity, possessing the unique properties of nanomaterials and natural enzyme-like catalytic functions. Nanozymes are catalytically active, stable, tunable, recyclable, and versatile. Therefore, increasing attention has been paid in the fields of environmental science and life sciences. In this review, we focused on the most recent applications of nanozymes for environmental monitoring, environmental management, and environmental protection. We firstly introduce the tuning catalytic activity of nanozymes according to some crucial factors such as size and shape, composition and doping, and surface coating. Then, the application of nanozymes in environmental fields are introduced in detail. Nanozymes can not only be used to detect inorganic ions, molecules, organics, and foodborne pathogenic bacteria but are also involved in the degradation of phenolic compounds, dyes, and antibiotics. The capability of nanozymes was also reported for assisting air purification, constructing biofuel cells, and application in marine antibacterial fouling removal. Finally, the current challenges and future trends of nanozymes toward environmental fields are proposed and discussed.

Label-free fluorescence detection of hydrogen peroxide and glucose based on the Ni-MOF nanozyme-induced self-ligand emission

A bifunctional Ni-MOF nanosheet was synthesized and developed for label-free fluorescent detection of H₂O₂ and glucose. The Ni-MOF exhibited intrinsic peroxidase-like activity and its catalytic activity was demonstrated to be originated from the hydroxyl radicals (•OH) produced in catalytic process. Since the generated •OH enabled terephthalic acid, the non-fluorescent organic ligand of Ni-MOF, to form a strongly fluorescent 2-hydroxy terephthalic acid, the Ni-MOF nanozyme was endowed with dual-function properties of mimicking peroxidase and emitting fluorescence. Based on this bifunctional Ni-MOF nanozyme, the proposed label-free fluorescence sensing strategy was applied to detecting H₂O₂ and glucose with wide linear ranges of 0.1-20 mM and 8-30 μM, and low detection limits of 4.0 × 10^-5 M and 4.0 × 10^-6 M, respectively. Furthermore, the bifunctional Ni-MOF-based label-free sensing platform was successfully used for the glucose detection in human serum samples, showing good reproducibility and high accuracy. This strategy provides a green and sensitive method for the determination of small biomolecules in practical applications by the combination of enzyme cascade reaction.

In situ synthesis of Co-doped MoS2 nanosheet for enhanced mimicking peroxidase activity

To enhance the catalytic activity of two-dimensional layered materials as versatile materials, the modification of transition metal dichalcogenide nanosheets such as MoS₂ by doping with heteroatoms has drawn great interests. However, few reports are available on the study of the enzyme-like activity of doped MoS₂. In this study, a facile in situ hydrothermal method for the preparation of various ultrathin transition metals (Fe, Cu, Co, Mn, and Ni) doped MoS₂ nanosheets has been reported. Through the density functional theory (DFT) and steady-state kinetic analysis, the Co-doped MoS₂ nanosheets exhibited the highest peroxidase-like catalytic activity among them. Furthermore, a typical colorimetric assay for H₂O₂ was presented based on the catalytic oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB) by Co-MoS₂. The proposed colorimetric method showed excellent tolerance under extreme conditions and a broad linear range from 0.0005 to 25 mM for H₂O₂ determination. Concerning the practical application, in situ detection of H₂O₂ generated from SiHa cells was also fulfilled, fully confirming the great practicability of the proposed method in biosensing fields.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-07201-z.

Perspective for Single Atom Nanozymes Based Sensors: Advanced Materials, Sensing Mechanism, Selectivity Regulation, and Applications

Nanozymes are a kind of nanomaterial mimicking enzyme catalytic activity, which has aroused extensive interest in the fields of biosensors, biomedicine, and climate and ecosystems management. However, due to the complexity of structures and composition of nanozymes, atomic scale active centers have been extensively investigated, which helps with in-depth understanding of the nature of the biocatalysis. Single atom nanozymes (SANs) cannot only significantly enhance the activity of nanozymes but also effectively improve the selectivity of nanozymes owing to the characteristics of simple and adjustable coordination environment and have been becoming the brightest star in the nanozyme spectrum. The SANs based sensors have also been widely investigated due to their definite structural features, which can be helpful to study the catalytic mechanism and provide ways to improve catalytic activity. This perspective presents a comprehensive understanding on the advances and challenges on SANs based sensors. The catalytic mechanisms of SANs and then the sensing application from the perspectives of sensing technology and sensor construction are thoroughly analyzed. Finally, the major challenges, potential future research directions, and prospects for further research on SANs based sensors are also proposed.

A template-free assembly of Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes

Utilizing Cu2+-coordinated poly(m-phenylenediamine) as the precursor, Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes were assembled through a template-free strategy for the first time.

Progress and Perspective on Carbon-Based Nanozymes for Peroxidase-like Applications

Tumor microenvironment-responsive chemodynamic therapy (CDT), an approach based on Fenton/Fenton-like reaction to convert hydrogen peroxide (H₂O₂) into the highly cytotoxic hydroxyl radical (·OH) in situ to kill cancer cells, represents an important direction for cancer therapy. Different types of nanozymes (nanomaterial-based catalysts that can mimic the activities of natural enzymes) have been developed to mimic peroxidase. This Perspective highlights the latest research progress regarding low-cost and biocompatible carbon-based nanozymes for peroxidase mimics. The effects of structure and surface properties of carbon-based nanozymes on their electronic transfer and peroxidase-like activity are analyzed, including nanospheres, nanotubes, nanosheets, and graphene quantum dots (GQDs) with or without surface functionalization and heteroatom doping. We expand our newly developed carbon nitride (g-C₃N₄) QD systems to nanozyme application, which are highly efficient in converting the intracellular H₂O₂ to ·OH species to kill 4T1 cancer cells and demonstrate a great potential for CDT.

Peroxidase-mimetic activity of a nanozyme with uniformly dispersed Fe3O4 NPs supported by mesoporous graphitized carbon for determination of glucose

A Fe₃O₄/mesoporous graphitized carbon (Fe₃O₄/m-GC) composite was prepared through a facile calcination method with iron-based metal-organic frameworks (Fe-MOFs) as a sacrificial template. After carbonization, the Fe₃O₄ nanoparticles were uniformly dispersed in the mesoporous carbon support, resulting in spatial structural stability. The mesoporous carbon support obtained was highly graphitized and exhibited eminent electrical conductivity, which accelerated the electron transfer between the Fe₃O₄ nanoparticles by Fe(II)/Fe(III) redox cycles and m-GC by C = C_sp2/C-C_sp3 redox cycles, leading to the excellent peroxidase-mimetic activity of Fe₃O₄/m-GC. K_m values for tetramethylbenzidine (TMB) and H₂O₂ were 26.8 and 15.8 times lower than that of natural horseradish peroxidase, respectively. Taking advantage of the peroxidase-mimetic activity of Fe₃O₄/m-GC, a colorimetric assay was fabricated for detecting glucose in the range 0.5 ~ 200 μM, with a limit of detection of 0.24 μM. Fig 1 A Schematic illustration of the preparation process of Fe₃O₄/m-GC, B schematic illustration of a proposed synergistic catalytic mechanism of TMB oxidation by Fe₃O₄/m-GC.

One-pot facile synthesis of enzyme-encapsulated Zn/Co-infinite coordination polymer nanospheres as a biocatalytic cascade platform for colorimetric monitoring of bacteria viability

A rapid method for colorimetric monitoring of bacterial viability is described. The colorimetric method was carried out based on glucose oxidase-encapsulated Zn/Co-infinite coordination polymer (Zn/Co-ICP@GOx), which was prepared in aqueous solution free of toxic organic solvents at room temperature. The Zn/Co-ICP@GOx was confirmed to be a robust sphere structure with an average diameter of 147.53 ± 20.40 nm. It integrated the catalytic activity of natural enzyme (GOx) and mimetic peroxidase (Co (П)) all in one, efficiently acting as a biocatalytic cascade platform for glucose catalytic reaction. Exhibiting good multi-enzyme catalytic activity, stability, and selectivity, Zn/Co-ICP@GOx can be used for colorimetric glucose detection. The linear range was 0.01-1.0 mmol/L, and the limit of detection (LOD) was 0.005 mmol/L. As the glucose metabolism is a common expression of bacteria, the remaining glucose can indirectly represent the bacterial viability. Hence, a Zn/Co-ICP@GOx-based colorimetric method was developed for monitoring of bacterial viability. The color was intuitively observed with the naked eye, and the bacterial viability was accurately quantified by measurement of the absorbance at 510 nm. The method was applied to determination of bacterial viability in water and milk samples with recoveries of 99.0-103% and RSD of 0.43-7.5%. The method was rapid (less than 40 min) and applicable to different bacterial species irrespective of Gram-positive and Gram-negative bacteria, providing a universal and promising strategy for real-time monitoring of bacterial viability.

Nanozymes-Hitting the Biosensing "Target"

Nanozymes are a class of artificial enzymes that have dimensions in the nanometer range and can be composed of simple metal and metal oxide nanoparticles, metal nanoclusters, dots (both quantum and carbon), nanotubes, nanowires, or multiple metal-organic frameworks (MOFs). They exhibit excellent catalytic activities with low cost, high operational robustness, and a stable shelf-life. More importantly, they are amenable to modifications that can change their surface structures and increase the range of their applications. There are three main classes of nanozymes including the peroxidase-like, the oxidase-like, and the antioxidant nanozymes. Each of these classes catalyzes a specific group of reactions. With the development of nanoscience and nanotechnology, the variety of applications for nanozymes in diverse fields has expanded dramatically, with the most popular applications in biosensing. Nanozyme-based novel biosensors have been designed to detect ions, small molecules, nucleic acids, proteins, and cancer cells. The current review focuses on the catalytic mechanism of nanozymes, their application in biosensing, and the identification of future directions for the field.